1# 2# USB Serial device configuration 3# 4 5menuconfig USB_SERIAL 6 tristate "USB Serial Converter support" 7 depends on USB 8 ---help--- 9 Say Y here if you have a USB device that provides normal serial 10 ports, or acts like a serial device, and you want to connect it to 11 your USB bus. 12 13 Please read <file:Documentation/usb/usb-serial.txt> for more 14 information on the specifics of the different devices that are 15 supported, and on how to use them. 16 17 To compile this driver as a module, choose M here: the 18 module will be called usbserial. 19 20if USB_SERIAL 21 22config USB_SERIAL_CONSOLE 23 bool "USB Serial Console device support" 24 depends on USB_SERIAL=y 25 ---help--- 26 If you say Y here, it will be possible to use a USB to serial 27 converter port as the system console (the system console is the 28 device which receives all kernel messages and warnings and which 29 allows logins in single user mode). This could be useful if some 30 terminal or printer is connected to that serial port. 31 32 Even if you say Y here, the currently visible virtual console 33 (/dev/tty0) will still be used as the system console by default, but 34 you can alter that using a kernel command line option such as 35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of 36 your boot loader (lilo or loadlin) about how to pass options to the 37 kernel at boot time.) 38 39 If you don't have a VGA card installed and you say Y here, the 40 kernel will automatically use the first USB to serial converter 41 port, /dev/ttyUSB0, as system console. 42 43 If unsure, say N. 44 45config USB_EZUSB 46 bool "Functions for loading firmware on EZUSB chips" 47 help 48 Say Y here if you need EZUSB device support. 49 50config USB_SERIAL_GENERIC 51 bool "USB Generic Serial Driver" 52 help 53 Say Y here if you want to use the generic USB serial driver. Please 54 read <file:Documentation/usb/usb-serial.txt> for more information on 55 using this driver. It is recommended that the "USB Serial converter 56 support" be compiled as a module for this driver to be used 57 properly. 58 59config USB_SERIAL_AIRCABLE 60 tristate "USB AIRcable Bluetooth Dongle Driver" 61 help 62 Say Y here if you want to use USB AIRcable Bluetooth Dongle. 63 64 To compile this driver as a module, choose M here: the module 65 will be called aircable. 66 67config USB_SERIAL_ARK3116 68 tristate "USB ARK Micro 3116 USB Serial Driver" 69 help 70 Say Y here if you want to use a ARK Micro 3116 USB to Serial 71 device. 72 73 To compile this driver as a module, choose M here: the 74 module will be called ark3116 75 76config USB_SERIAL_BELKIN 77 tristate "USB Belkin and Peracom Single Port Serial Driver" 78 help 79 Say Y here if you want to use a Belkin USB Serial single port 80 adaptor (F5U103 is one of the model numbers) or the Peracom single 81 port USB to serial adapter. 82 83 To compile this driver as a module, choose M here: the 84 module will be called belkin_sa. 85 86config USB_SERIAL_CH341 87 tristate "USB Winchiphead CH341 Single Port Serial Driver" 88 help 89 Say Y here if you want to use a Winchiphead CH341 single port 90 USB to serial adapter. 91 92 To compile this driver as a module, choose M here: the 93 module will be called ch341. 94 95config USB_SERIAL_WHITEHEAT 96 tristate "USB ConnectTech WhiteHEAT Serial Driver" 97 select USB_EZUSB 98 help 99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port 100 USB to serial converter device. 101 102 To compile this driver as a module, choose M here: the 103 module will be called whiteheat. 104 105config USB_SERIAL_DIGI_ACCELEPORT 106 tristate "USB Digi International AccelePort USB Serial Driver" 107 ---help--- 108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 109 2 port (plus parallel port) and 4 port USB serial converters. The 110 parallel port on the USB 2 appears as a third serial port on Linux. 111 The Digi Acceleport USB 8 is not yet supported by this driver. 112 113 This driver works under SMP with the usb-uhci driver. It does not 114 work under SMP with the uhci driver. 115 116 To compile this driver as a module, choose M here: the 117 module will be called digi_acceleport. 118 119config USB_SERIAL_CP2101 120 tristate "USB CP2101 UART Bridge Controller" 121 help 122 Say Y here if you want to use a CP2101/CP2102 based USB to RS232 123 converter. 124 125 To compile this driver as a module, choose M here: the 126 module will be called cp2101. 127 128config USB_SERIAL_CYPRESS_M8 129 tristate "USB Cypress M8 USB Serial Driver" 130 help 131 Say Y here if you want to use a device that contains the Cypress 132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS. 133 134 Attempted SMP support... send bug reports! 135 136 Supported microcontrollers in the CY4601 family are: 137 CY7C63741 CY7C63742 CY7C63743 CY7C64013 138 139 To compile this driver as a module, choose M here: the 140 module will be called cypress_m8. 141 142config USB_SERIAL_EMPEG 143 tristate "USB Empeg empeg-car Mark I/II Driver" 144 help 145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II 146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} 147 device node. See <file:Documentation/usb/usb-serial.txt> for more 148 tidbits of information. 149 150 To compile this driver as a module, choose M here: the 151 module will be called empeg. 152 153config USB_SERIAL_FTDI_SIO 154 tristate "USB FTDI Single Port Serial Driver" 155 ---help--- 156 Say Y here if you want to use a FTDI SIO single port USB to serial 157 converter device. The implementation I have is called the USC-1000. 158 This driver has also be tested with the 245 and 232 devices. 159 160 See <http://ftdi-usb-sio.sourceforge.net/> for more 161 information on this driver and the device. 162 163 To compile this driver as a module, choose M here: the 164 module will be called ftdi_sio. 165 166config USB_SERIAL_FUNSOFT 167 tristate "USB Fundamental Software Dongle Driver" 168 ---help--- 169 Say Y here if you want to use the Fundamental Software dongle. 170 171 To compile this driver as a module, choose M here: the 172 module will be called funsoft. 173 174config USB_SERIAL_VISOR 175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" 176 help 177 Say Y here if you want to connect to your HandSpring Visor, Palm 178 m500 or m505 through its USB docking station. See 179 <http://usbvisor.sourceforge.net/> for more information on using this 180 driver. 181 182 To compile this driver as a module, choose M here: the 183 module will be called visor. 184 185config USB_SERIAL_IPAQ 186 tristate "USB PocketPC PDA Driver" 187 help 188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada 189 or any other PDA running Windows CE 3.0 or PocketPC 2002 190 using a USB cradle/cable. For information on using the driver, 191 read <file:Documentation/usb/usb-serial.txt>. 192 193 To compile this driver as a module, choose M here: the 194 module will be called ipaq. 195 196config USB_SERIAL_IR 197 tristate "USB IR Dongle Serial Driver" 198 help 199 Say Y here if you want to enable simple serial support for USB IrDA 200 devices. This is useful if you do not want to use the full IrDA 201 stack. 202 203 To compile this driver as a module, choose M here: the 204 module will be called ir-usb. 205 206config USB_SERIAL_EDGEPORT 207 tristate "USB Inside Out Edgeport Serial Driver" 208 ---help--- 209 Say Y here if you want to use any of the following devices from 210 Inside Out Networks (Digi): 211 Edgeport/4 212 Rapidport/4 213 Edgeport/4t 214 Edgeport/2 215 Edgeport/4i 216 Edgeport/2i 217 Edgeport/421 218 Edgeport/21 219 Edgeport/8 220 Edgeport/8 Dual 221 Edgeport/2D8 222 Edgeport/4D8 223 Edgeport/8i 224 Edgeport/2 DIN 225 Edgeport/4 DIN 226 Edgeport/16 Dual 227 228 To compile this driver as a module, choose M here: the 229 module will be called io_edgeport. 230 231config USB_SERIAL_EDGEPORT_TI 232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)" 233 help 234 Say Y here if you want to use any of the devices from Inside Out 235 Networks (Digi) that are not supported by the io_edgeport driver. 236 This includes the Edgeport/1 device. 237 238 To compile this driver as a module, choose M here: the 239 module will be called io_ti. 240 241config USB_SERIAL_GARMIN 242 tristate "USB Garmin GPS driver" 243 help 244 Say Y here if you want to connect to your Garmin GPS. 245 Should work with most Garmin GPS devices which have a native USB port. 246 247 See <http://sourceforge.net/projects/garmin-gps> for the latest 248 version of the driver. 249 250 To compile this driver as a module, choose M here: the 251 module will be called garmin_gps. 252 253config USB_SERIAL_IPW 254 tristate "USB IPWireless (3G UMTS TDD) Driver" 255 help 256 Say Y here if you want to use a IPWireless USB modem such as 257 the ones supplied by Axity3G/Sentech South Africa. 258 259 To compile this driver as a module, choose M here: the 260 module will be called ipw. 261 262config USB_SERIAL_IUU 263 tristate "USB Infinity USB Unlimited Phoenix Driver" 264 help 265 Say Y here if you want to use a IUU in phoenix mode and get 266 an extra ttyUSBx device. More information available on 267 http://eczema.ecze.com/iuu_phoenix.html 268 269 To compile this driver as a module, choose M here: the 270 module will be called iuu_phoenix.o 271 272config USB_SERIAL_KEYSPAN_PDA 273 tristate "USB Keyspan PDA Single Port Serial Driver" 274 select USB_EZUSB 275 help 276 Say Y here if you want to use a Keyspan PDA single port USB to 277 serial converter device. This driver makes use of firmware 278 developed from scratch by Brian Warner. 279 280 To compile this driver as a module, choose M here: the 281 module will be called keyspan_pda. 282 283config USB_SERIAL_KEYSPAN 284 tristate "USB Keyspan USA-xxx Serial Driver" 285 select USB_EZUSB 286 ---help--- 287 Say Y here if you want to use Keyspan USB to serial converter 288 devices. This driver makes use of Keyspan's official firmware 289 and was developed with their support. You must also include 290 firmware to support your particular device(s). 291 292 See <http://misc.nu/hugh/keyspan.html> for more information. 293 294 To compile this driver as a module, choose M here: the 295 module will be called keyspan. 296 297config USB_SERIAL_KEYSPAN_MPR 298 bool "USB Keyspan MPR Firmware" 299 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 300 help 301 Say Y here to include firmware for the Keyspan MPR converter. 302 303config USB_SERIAL_KEYSPAN_USA28 304 bool "USB Keyspan USA-28 Firmware" 305 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 306 help 307 Say Y here to include firmware for the USA-28 converter. 308 309config USB_SERIAL_KEYSPAN_USA28X 310 bool "USB Keyspan USA-28X Firmware" 311 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 312 help 313 Say Y here to include firmware for the USA-28X converter. 314 Be sure you have a USA-28X, there are also 28XA and 28XB 315 models, the label underneath has the actual part number. 316 317config USB_SERIAL_KEYSPAN_USA28XA 318 bool "USB Keyspan USA-28XA Firmware" 319 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 320 help 321 Say Y here to include firmware for the USA-28XA converter. 322 Be sure you have a USA-28XA, there are also 28X and 28XB 323 models, the label underneath has the actual part number. 324 325config USB_SERIAL_KEYSPAN_USA28XB 326 bool "USB Keyspan USA-28XB Firmware" 327 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 328 help 329 Say Y here to include firmware for the USA-28XB converter. 330 Be sure you have a USA-28XB, there are also 28X and 28XA 331 models, the label underneath has the actual part number. 332 333config USB_SERIAL_KEYSPAN_USA19 334 bool "USB Keyspan USA-19 Firmware" 335 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 336 help 337 Say Y here to include firmware for the USA-19 converter. 338 339config USB_SERIAL_KEYSPAN_USA18X 340 bool "USB Keyspan USA-18X Firmware" 341 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 342 help 343 Say Y here to include firmware for the USA-18X converter. 344 345config USB_SERIAL_KEYSPAN_USA19W 346 bool "USB Keyspan USA-19W Firmware" 347 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 348 help 349 Say Y here to include firmware for the USA-19W converter. 350 351config USB_SERIAL_KEYSPAN_USA19QW 352 bool "USB Keyspan USA-19QW Firmware" 353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 354 help 355 Say Y here to include firmware for the USA-19QW converter. 356 357config USB_SERIAL_KEYSPAN_USA19QI 358 bool "USB Keyspan USA-19QI Firmware" 359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 360 help 361 Say Y here to include firmware for the USA-19QI converter. 362 363config USB_SERIAL_KEYSPAN_USA49W 364 bool "USB Keyspan USA-49W Firmware" 365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 366 help 367 Say Y here to include firmware for the USA-49W converter. 368 369config USB_SERIAL_KEYSPAN_USA49WLC 370 bool "USB Keyspan USA-49WLC Firmware" 371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 372 help 373 Say Y here to include firmware for the USA-49WLC converter. 374 375config USB_SERIAL_KLSI 376 tristate "USB KL5KUSB105 (Palmconnect) Driver" 377 ---help--- 378 Say Y here if you want to use a KL5KUSB105 - based single port 379 serial adapter. The most widely known -- and currently the only 380 tested -- device in this category is the PalmConnect USB Serial 381 adapter sold by Palm Inc. for use with their Palm III and Palm V 382 series PDAs. 383 384 Please read <file:Documentation/usb/usb-serial.txt> for more 385 information. 386 387 To compile this driver as a module, choose M here: the 388 module will be called kl5kusb105. 389 390config USB_SERIAL_KOBIL_SCT 391 tristate "USB KOBIL chipcard reader" 392 ---help--- 393 Say Y here if you want to use one of the following KOBIL USB chipcard 394 readers: 395 396 - USB TWIN 397 - KAAN Standard Plus 398 - KAAN SIM 399 - SecOVID Reader Plus 400 - B1 Professional 401 - KAAN Professional 402 403 Note that you need a current CT-API. 404 To compile this driver as a module, choose M here: the 405 module will be called kobil_sct. 406 407config USB_SERIAL_MCT_U232 408 tristate "USB MCT Single Port Serial Driver" 409 ---help--- 410 Say Y here if you want to use a USB Serial single port adapter from 411 Magic Control Technology Corp. (U232 is one of the model numbers). 412 413 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB 414 BAY, Belkin F5U109, and Belkin F5U409 devices. 415 416 To compile this driver as a module, choose M here: the 417 module will be called mct_u232. 418 419config USB_SERIAL_MOS7720 420 tristate "USB Moschip 7720 Serial Driver" 421 ---help--- 422 Say Y here if you want to use USB Serial single and double 423 port adapters from Moschip Semiconductor Tech. 424 425 To compile this driver as a module, choose M here: the 426 module will be called mos7720. 427 428config USB_SERIAL_MOS7840 429 tristate "USB Moschip 7840/7820 USB Serial Driver" 430 ---help--- 431 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 432 Dual-Serial port device from MosChip Semiconductor. 433 434 The MCS7840 and MCS7820 have been developed to connect a wide range 435 of standard serial devices to a USB host. The MCS7840 has a USB 436 device controller connected to four (4) individual UARTs while the 437 MCS7820 controller connects to two (2) individual UARTs. 438 439 To compile this driver as a module, choose M here: the 440 module will be called mos7840. If unsure, choose N. 441 442config USB_SERIAL_MOTOROLA 443 tristate "USB Motorola Phone modem driver" 444 ---help--- 445 Say Y here if you want to use a Motorola phone with a USB 446 connector as a modem link. 447 448 To compile this driver as a module, choose M here: the 449 module will be called moto_modem. If unsure, choose N. 450 451config USB_SERIAL_NAVMAN 452 tristate "USB Navman GPS device" 453 help 454 To compile this driver as a module, choose M here: the 455 module will be called navman. 456 457config USB_SERIAL_PL2303 458 tristate "USB Prolific 2303 Single Port Serial Driver" 459 help 460 Say Y here if you want to use the PL2303 USB Serial single port 461 adapter from Prolific. 462 463 To compile this driver as a module, choose M here: the 464 module will be called pl2303. 465 466config USB_SERIAL_OTI6858 467 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" 468 help 469 Say Y here if you want to use the OTi-6858 single port USB to serial 470 converter device. 471 472 To compile this driver as a module, choose M here: the 473 module will be called oti6858. 474 475config USB_SERIAL_QUALCOMM 476 tristate "USB Qualcomm Serial modem" 477 help 478 Say Y here if you have a Qualcomm USB modem device. These are 479 usually wireless cellular modems. 480 481 To compile this driver as a module, choose M here: the 482 module will be called qcserial. 483 484config USB_SERIAL_SPCP8X5 485 tristate "USB SPCP8x5 USB To Serial Driver" 486 help 487 Say Y here if you want to use the spcp8x5 converter chip. This is 488 commonly found in some Z-Wave USB devices. 489 490 To compile this driver as a module, choose M here: the 491 module will be called spcp8x5. 492 493config USB_SERIAL_HP4X 494 tristate "USB HP4x Calculators support" 495 help 496 Say Y here if you want to use an Hewlett-Packard 4x Calculator. 497 498 To compile this driver as a module, choose M here: the 499 module will be called hp4x. 500 501config USB_SERIAL_SAFE 502 tristate "USB Safe Serial (Encapsulated) Driver" 503 504config USB_SERIAL_SAFE_PADDED 505 bool "USB Secure Encapsulated Driver - Padded" 506 depends on USB_SERIAL_SAFE 507 508config USB_SERIAL_SIEMENS_MPI 509 tristate "USB Siemens MPI driver" 510 help 511 Say M here if you want to use a Siemens USB/MPI adapter. 512 513 To compile this driver as a module, choose M here: the 514 module will be called siemens_mpi. 515 516config USB_SERIAL_SIERRAWIRELESS 517 tristate "USB Sierra Wireless Driver" 518 help 519 Say M here if you want to use Sierra Wireless devices. 520 521 Many deviecs have a feature known as TRU-Install, for those devices 522 to work properly the USB Storage Sierra feature must be enabled. 523 524 To compile this driver as a module, choose M here: the 525 module will be called sierra. 526 527config USB_SERIAL_SYMBOL 528 tristate "USB Symbol Barcode driver (serial mode)" 529 help 530 Say Y here if you want to use a Symbol USB Barcode device 531 in serial emulation mode. 532 533 To compile this driver as a module, choose M here: the 534 module will be called symbolserial. 535 536config USB_SERIAL_TI 537 tristate "USB TI 3410/5052 Serial Driver" 538 help 539 Say Y here if you want to use the TI USB 3410 or 5052 540 serial devices. 541 542 To compile this driver as a module, choose M here: the 543 module will be called ti_usb_3410_5052. 544 545config USB_SERIAL_CYBERJACK 546 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" 547 ---help--- 548 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard 549 reader. This is an interface to ISO 7816 compatible contact-based 550 chipcards, e.g. GSM SIMs. 551 552 To compile this driver as a module, choose M here: the 553 module will be called cyberjack. 554 555 If unsure, say N. 556 557config USB_SERIAL_XIRCOM 558 tristate "USB Xircom / Entregra Single Port Serial Driver" 559 select USB_EZUSB 560 help 561 Say Y here if you want to use a Xircom or Entregra single port USB to 562 serial converter device. This driver makes use of firmware 563 developed from scratch by Brian Warner. 564 565 To compile this driver as a module, choose M here: the 566 module will be called keyspan_pda. 567 568config USB_SERIAL_OPTION 569 tristate "USB driver for GSM and CDMA modems" 570 help 571 Say Y here if you have a GSM or CDMA modem that's connected to USB. 572 573 This driver also supports several PCMCIA cards which have a 574 built-in OHCI-USB adapter and an internally-connected GSM modem. 575 The USB bus on these cards is not accessible externally. 576 577 Supported devices include (some of?) those made by: 578 Option, Huawei, Audiovox, Novatel Wireless, or Anydata. 579 580 To compile this driver as a module, choose M here: the 581 module will be called option. 582 583 If this driver doesn't recognize your device, 584 it might be accessible via the FTDI_SIO driver. 585 586config USB_SERIAL_OMNINET 587 tristate "USB ZyXEL omni.net LCD Plus Driver" 588 help 589 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. 590 591 To compile this driver as a module, choose M here: the 592 module will be called omninet. 593 594config USB_SERIAL_OPTICON 595 tristate "USB Opticon Barcode driver (serial mode)" 596 help 597 Say Y here if you want to use a Opticon USB Barcode device 598 in serial emulation mode. 599 600 To compile this driver as a module, choose M here: the 601 module will be called opticon. 602 603config USB_SERIAL_DEBUG 604 tristate "USB Debugging Device" 605 help 606 Say Y here if you have a USB debugging device used to receive 607 debugging data from another machine. The most common of these 608 devices is the NetChip TurboCONNECT device. 609 610 To compile this driver as a module, choose M here: the 611 module will be called usb-debug. 612 613endif # USB_SERIAL 614