1# 2# USB Serial device configuration 3# 4 5menu "USB Serial Converter support" 6 depends on USB!=n 7 8config USB_SERIAL 9 tristate "USB Serial Converter support" 10 depends on USB 11 ---help--- 12 Say Y here if you have a USB device that provides normal serial 13 ports, or acts like a serial device, and you want to connect it to 14 your USB bus. 15 16 Please read <file:Documentation/usb/usb-serial.txt> for more 17 information on the specifics of the different devices that are 18 supported, and on how to use them. 19 20 To compile this driver as a module, choose M here: the 21 module will be called usbserial. 22 23config USB_SERIAL_CONSOLE 24 bool "USB Serial Console device support (EXPERIMENTAL)" 25 depends on USB_SERIAL=y && EXPERIMENTAL 26 ---help--- 27 If you say Y here, it will be possible to use a USB to serial 28 converter port as the system console (the system console is the 29 device which receives all kernel messages and warnings and which 30 allows logins in single user mode). This could be useful if some 31 terminal or printer is connected to that serial port. 32 33 Even if you say Y here, the currently visible virtual console 34 (/dev/tty0) will still be used as the system console by default, but 35 you can alter that using a kernel command line option such as 36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of 37 your boot loader (lilo or loadlin) about how to pass options to the 38 kernel at boot time.) 39 40 If you don't have a VGA card installed and you say Y here, the 41 kernel will automatically use the first USB to serial converter 42 port, /dev/ttyUSB0, as system console. 43 44 If unsure, say N. 45 46config USB_SERIAL_GENERIC 47 bool "USB Generic Serial Driver" 48 depends on USB_SERIAL 49 help 50 Say Y here if you want to use the generic USB serial driver. Please 51 read <file:Documentation/usb/usb-serial.txt> for more information on 52 using this driver. It is recommended that the "USB Serial converter 53 support" be compiled as a module for this driver to be used 54 properly. 55 56config USB_SERIAL_BELKIN 57 tristate "USB Belkin and Peracom Single Port Serial Driver" 58 depends on USB_SERIAL 59 help 60 Say Y here if you want to use a Belkin USB Serial single port 61 adaptor (F5U103 is one of the model numbers) or the Peracom single 62 port USB to serial adapter. 63 64 To compile this driver as a module, choose M here: the 65 module will be called belkin_sa. 66 67config USB_SERIAL_WHITEHEAT 68 tristate "USB ConnectTech WhiteHEAT Serial Driver" 69 depends on USB_SERIAL && BROKEN_ON_SMP 70 help 71 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port 72 USB to serial converter device. 73 74 To compile this driver as a module, choose M here: the 75 module will be called whiteheat. 76 77config USB_SERIAL_DIGI_ACCELEPORT 78 tristate "USB Digi International AccelePort USB Serial Driver" 79 depends on USB_SERIAL 80 ---help--- 81 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 82 2 port (plus parallel port) and 4 port USB serial converters. The 83 parallel port on the USB 2 appears as a third serial port on Linux. 84 The Digi Acceleport USB 8 is not yet supported by this driver. 85 86 This driver works under SMP with the usb-uhci driver. It does not 87 work under SMP with the uhci driver. 88 89 To compile this driver as a module, choose M here: the 90 module will be called digi_acceleport. 91 92config USB_SERIAL_CP2101 93 tristate "USB CP2101 UART Bridge Controller" 94 depends on USB_SERIAL && EXPERIMENTAL 95 help 96 Say Y here if you want to use a CP2101/CP2102 based USB to RS232 97 converter. 98 99 To compile this driver as a module, choose M here: the 100 module will be called cp2101. 101 102config USB_SERIAL_CYPRESS_M8 103 tristate "USB Cypress M8 USB Serial Driver" 104 depends on USB_SERIAL && EXPERIMENTAL 105 help 106 Say Y here if you want to use a device that contains the Cypress 107 USB to Serial microcontroller, such as the DeLorme Earthmate GPS. 108 109 Attempted SMP support... send bug reports! 110 111 Supported microcontrollers in the CY4601 family are: 112 CY7C63741 CY7C63742 CY7C63743 CY7C64013 113 114 To compile this driver as a module, choose M here: the 115 module will be called cypress_m8. 116 117config USB_SERIAL_EMPEG 118 tristate "USB Empeg empeg-car Mark I/II Driver" 119 depends on USB_SERIAL 120 help 121 Say Y here if you want to connect to your Empeg empeg-car Mark I/II 122 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} 123 device node. See <file:Documentation/usb/usb-serial.txt> for more 124 tidbits of information. 125 126 To compile this driver as a module, choose M here: the 127 module will be called empeg. 128 129config USB_SERIAL_FTDI_SIO 130 tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)" 131 depends on USB_SERIAL && EXPERIMENTAL 132 ---help--- 133 Say Y here if you want to use a FTDI SIO single port USB to serial 134 converter device. The implementation I have is called the USC-1000. 135 This driver has also be tested with the 245 and 232 devices. 136 137 See <http://ftdi-usb-sio.sourceforge.net/> for more 138 information on this driver and the device. 139 140 To compile this driver as a module, choose M here: the 141 module will be called ftdi_sio. 142 143config USB_SERIAL_VISOR 144 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" 145 depends on USB_SERIAL 146 help 147 Say Y here if you want to connect to your HandSpring Visor, Palm 148 m500 or m505 through its USB docking station. See 149 <http://usbvisor.sourceforge.net/> for more information on using this 150 driver. 151 152 To compile this driver as a module, choose M here: the 153 module will be called visor. 154 155config USB_SERIAL_IPAQ 156 tristate "USB PocketPC PDA Driver" 157 depends on USB_SERIAL 158 help 159 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada 160 or any other PDA running Windows CE 3.0 or PocketPC 2002 161 using a USB cradle/cable. For information on using the driver, 162 read <file:Documentation/usb/usb-serial.txt>. 163 164 To compile this driver as a module, choose M here: the 165 module will be called ipaq. 166 167config USB_SERIAL_IR 168 tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)" 169 depends on USB_SERIAL && EXPERIMENTAL 170 help 171 Say Y here if you want to enable simple serial support for USB IrDA 172 devices. This is useful if you do not want to use the full IrDA 173 stack. 174 175 To compile this driver as a module, choose M here: the 176 module will be called ir-usb. 177 178config USB_SERIAL_EDGEPORT 179 tristate "USB Inside Out Edgeport Serial Driver" 180 depends on USB_SERIAL 181 ---help--- 182 Say Y here if you want to use any of the following devices from 183 Inside Out Networks (Digi): 184 Edgeport/4 185 Rapidport/4 186 Edgeport/4t 187 Edgeport/2 188 Edgeport/4i 189 Edgeport/2i 190 Edgeport/421 191 Edgeport/21 192 Edgeport/8 193 Edgeport/8 Dual 194 Edgeport/2D8 195 Edgeport/4D8 196 Edgeport/8i 197 Edgeport/2 DIN 198 Edgeport/4 DIN 199 Edgeport/16 Dual 200 201 To compile this driver as a module, choose M here: the 202 module will be called io_edgeport. 203 204config USB_SERIAL_EDGEPORT_TI 205 tristate "USB Inside Out Edgeport Serial Driver (TI devices)" 206 depends on USB_SERIAL 207 help 208 Say Y here if you want to use any of the devices from Inside Out 209 Networks (Digi) that are not supported by the io_edgeport driver. 210 This includes the Edgeport/1 device. 211 212 To compile this driver as a module, choose M here: the 213 module will be called io_ti. 214 215config USB_SERIAL_GARMIN 216 tristate "USB Garmin GPS driver" 217 depends on USB_SERIAL 218 help 219 Say Y here if you want to connect to your Garmin GPS. 220 Should work with most Garmin GPS devices which have a native USB port. 221 222 See <http://sourceforge.net/projects/garmin-gps> for the latest 223 version of the driver. 224 225 To compile this driver as a module, choose M here: the 226 module will be called garmin_gps. 227 228config USB_SERIAL_IPW 229 tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)" 230 depends on USB_SERIAL && EXPERIMENTAL 231 help 232 Say Y here if you want to use a IPWireless USB modem such as 233 the ones supplied by Axity3G/Sentech South Africa. 234 235 To compile this driver as a module, choose M here: the 236 module will be called ipw. 237 238config USB_SERIAL_KEYSPAN_PDA 239 tristate "USB Keyspan PDA Single Port Serial Driver" 240 depends on USB_SERIAL 241 help 242 Say Y here if you want to use a Keyspan PDA single port USB to 243 serial converter device. This driver makes use of firmware 244 developed from scratch by Brian Warner. 245 246 To compile this driver as a module, choose M here: the 247 module will be called keyspan_pda. 248 249config USB_SERIAL_KEYSPAN 250 tristate "USB Keyspan USA-xxx Serial Driver" 251 depends on USB_SERIAL 252 ---help--- 253 Say Y here if you want to use Keyspan USB to serial converter 254 devices. This driver makes use of Keyspan's official firmware 255 and was developed with their support. You must also include 256 firmware to support your particular device(s). 257 258 See <http://misc.nu/hugh/keyspan.html> for more information. 259 260 To compile this driver as a module, choose M here: the 261 module will be called keyspan. 262 263config USB_SERIAL_KEYSPAN_MPR 264 bool "USB Keyspan MPR Firmware" 265 depends on USB_SERIAL_KEYSPAN 266 help 267 Say Y here to include firmware for the Keyspan MPR converter. 268 269config USB_SERIAL_KEYSPAN_USA28 270 bool "USB Keyspan USA-28 Firmware" 271 depends on USB_SERIAL_KEYSPAN 272 help 273 Say Y here to include firmware for the USA-28 converter. 274 275config USB_SERIAL_KEYSPAN_USA28X 276 bool "USB Keyspan USA-28X Firmware" 277 depends on USB_SERIAL_KEYSPAN 278 help 279 Say Y here to include firmware for the USA-28X converter. 280 Be sure you have a USA-28X, there are also 28XA and 28XB 281 models, the label underneath has the actual part number. 282 283config USB_SERIAL_KEYSPAN_USA28XA 284 bool "USB Keyspan USA-28XA Firmware" 285 depends on USB_SERIAL_KEYSPAN 286 help 287 Say Y here to include firmware for the USA-28XA converter. 288 Be sure you have a USA-28XA, there are also 28X and 28XB 289 models, the label underneath has the actual part number. 290 291config USB_SERIAL_KEYSPAN_USA28XB 292 bool "USB Keyspan USA-28XB Firmware" 293 depends on USB_SERIAL_KEYSPAN 294 help 295 Say Y here to include firmware for the USA-28XB converter. 296 Be sure you have a USA-28XB, there are also 28X and 28XA 297 models, the label underneath has the actual part number. 298 299config USB_SERIAL_KEYSPAN_USA19 300 bool "USB Keyspan USA-19 Firmware" 301 depends on USB_SERIAL_KEYSPAN 302 help 303 Say Y here to include firmware for the USA-19 converter. 304 305config USB_SERIAL_KEYSPAN_USA18X 306 bool "USB Keyspan USA-18X Firmware" 307 depends on USB_SERIAL_KEYSPAN 308 help 309 Say Y here to include firmware for the USA-18X converter. 310 311config USB_SERIAL_KEYSPAN_USA19W 312 bool "USB Keyspan USA-19W Firmware" 313 depends on USB_SERIAL_KEYSPAN 314 help 315 Say Y here to include firmware for the USA-19W converter. 316 317config USB_SERIAL_KEYSPAN_USA19QW 318 bool "USB Keyspan USA-19QW Firmware" 319 depends on USB_SERIAL_KEYSPAN 320 help 321 Say Y here to include firmware for the USA-19QW converter. 322 323config USB_SERIAL_KEYSPAN_USA19QI 324 bool "USB Keyspan USA-19QI Firmware" 325 depends on USB_SERIAL_KEYSPAN 326 help 327 Say Y here to include firmware for the USA-19QI converter. 328 329config USB_SERIAL_KEYSPAN_USA49W 330 bool "USB Keyspan USA-49W Firmware" 331 depends on USB_SERIAL_KEYSPAN 332 help 333 Say Y here to include firmware for the USA-49W converter. 334 335config USB_SERIAL_KEYSPAN_USA49WLC 336 bool "USB Keyspan USA-49WLC Firmware" 337 depends on USB_SERIAL_KEYSPAN 338 help 339 Say Y here to include firmware for the USA-49WLC converter. 340 341config USB_SERIAL_KLSI 342 tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)" 343 depends on USB_SERIAL && EXPERIMENTAL 344 ---help--- 345 Say Y here if you want to use a KL5KUSB105 - based single port 346 serial adapter. The most widely known -- and currently the only 347 tested -- device in this category is the PalmConnect USB Serial 348 adapter sold by Palm Inc. for use with their Palm III and Palm V 349 series PDAs. 350 351 Please read <file:Documentation/usb/usb-serial.txt> for more 352 information. 353 354 To compile this driver as a module, choose M here: the 355 module will be called kl5kusb105. 356 357config USB_SERIAL_KOBIL_SCT 358 tristate "USB KOBIL chipcard reader" 359 depends on USB_SERIAL 360 ---help--- 361 Say Y here if you want to use one of the following KOBIL USB chipcard 362 readers: 363 364 - USB TWIN 365 - KAAN Standard Plus 366 - KAAN SIM 367 - SecOVID Reader Plus 368 - B1 Professional 369 - KAAN Professional 370 371 Note that you need a current CT-API. 372 To compile this driver as a module, choose M here: the 373 module will be called kobil_sct. 374 375config USB_SERIAL_MCT_U232 376 tristate "USB MCT Single Port Serial Driver" 377 depends on USB_SERIAL 378 ---help--- 379 Say Y here if you want to use a USB Serial single port adapter from 380 Magic Control Technology Corp. (U232 is one of the model numbers). 381 382 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB 383 BAY devices. 384 385 To compile this driver as a module, choose M here: the 386 module will be called mct_u232. 387 388config USB_SERIAL_PL2303 389 tristate "USB Prolific 2303 Single Port Serial Driver" 390 depends on USB_SERIAL 391 help 392 Say Y here if you want to use the PL2303 USB Serial single port 393 adapter from Prolific. 394 395 To compile this driver as a module, choose M here: the 396 module will be called pl2303. 397 398config USB_SERIAL_SAFE 399 tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)" 400 depends on USB_SERIAL && EXPERIMENTAL 401 402config USB_SERIAL_SAFE_PADDED 403 bool "USB Secure Encapsulated Driver - Padded" 404 depends on USB_SERIAL_SAFE 405 406config USB_SERIAL_TI 407 tristate "USB TI 3410/5052 Serial Driver" 408 depends on USB_SERIAL 409 help 410 Say Y here if you want to use the TI USB 3410 or 5052 411 serial devices. 412 413 To compile this driver as a module, choose M here: the 414 module will be called ti_usb_3410_5052. 415 416config USB_SERIAL_CYBERJACK 417 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)" 418 depends on USB_SERIAL && EXPERIMENTAL 419 ---help--- 420 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard 421 reader. This is an interface to ISO 7816 compatible contactbased 422 chipcards, e.g. GSM SIMs. 423 424 To compile this driver as a module, choose M here: the 425 module will be called cyberjack. 426 427 If unsure, say N. 428 429config USB_SERIAL_XIRCOM 430 tristate "USB Xircom / Entregra Single Port Serial Driver" 431 depends on USB_SERIAL 432 help 433 Say Y here if you want to use a Xircom or Entregra single port USB to 434 serial converter device. This driver makes use of firmware 435 developed from scratch by Brian Warner. 436 437 To compile this driver as a module, choose M here: the 438 module will be called keyspan_pda. 439 440config USB_SERIAL_OMNINET 441 tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" 442 depends on USB_SERIAL && EXPERIMENTAL 443 help 444 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. 445 446 To compile this driver as a module, choose M here: the 447 module will be called omninet. 448 449config USB_EZUSB 450 bool 451 depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT 452 default y 453 454endmenu 455 456