1 /* 2 * Renesas USB driver 3 * 4 * Copyright (C) 2011 Renesas Solutions Corp. 5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> 6 * 7 * This program is distributed in the hope that it will be useful, 8 * but WITHOUT ANY WARRANTY; without even the implied warranty of 9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 * GNU General Public License for more details. 11 * 12 * You should have received a copy of the GNU General Public License 13 * along with this program; if not, write to the Free Software 14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 15 * 16 */ 17 #include <linux/io.h> 18 #include <linux/module.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/slab.h> 21 #include <linux/sysfs.h> 22 #include "./common.h" 23 24 /* 25 * image of renesas_usbhs 26 * 27 * ex) gadget case 28 29 * mod.c 30 * mod_gadget.c 31 * mod_host.c pipe.c fifo.c 32 * 33 * +-------+ +-----------+ 34 * | pipe0 |------>| fifo pio | 35 * +------------+ +-------+ +-----------+ 36 * | mod_gadget |=====> | pipe1 |--+ 37 * +------------+ +-------+ | +-----------+ 38 * | pipe2 | | +-| fifo dma0 | 39 * +------------+ +-------+ | | +-----------+ 40 * | mod_host | | pipe3 |<-|--+ 41 * +------------+ +-------+ | +-----------+ 42 * | .... | +--->| fifo dma1 | 43 * | .... | +-----------+ 44 */ 45 46 47 #define USBHSF_RUNTIME_PWCTRL (1 << 0) 48 49 /* status */ 50 #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) 51 #define usbhsc_flags_set(p, b) ((p)->flags |= (b)) 52 #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) 53 #define usbhsc_flags_has(p, b) ((p)->flags & (b)) 54 55 /* 56 * platform call back 57 * 58 * renesas usb support platform callback function. 59 * Below macro call it. 60 * if platform doesn't have callback, it return 0 (no error) 61 */ 62 #define usbhs_platform_call(priv, func, args...)\ 63 (!(priv) ? -ENODEV : \ 64 !((priv)->pfunc.func) ? 0 : \ 65 (priv)->pfunc.func(args)) 66 67 /* 68 * common functions 69 */ 70 u16 usbhs_read(struct usbhs_priv *priv, u32 reg) 71 { 72 return ioread16(priv->base + reg); 73 } 74 75 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) 76 { 77 iowrite16(data, priv->base + reg); 78 } 79 80 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) 81 { 82 u16 val = usbhs_read(priv, reg); 83 84 val &= ~mask; 85 val |= data & mask; 86 87 usbhs_write(priv, reg, val); 88 } 89 90 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) 91 { 92 return dev_get_drvdata(&pdev->dev); 93 } 94 95 /* 96 * syscfg functions 97 */ 98 static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) 99 { 100 usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); 101 } 102 103 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) 104 { 105 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; 106 u16 val = DCFM | DRPD | HSE | USBE; 107 int has_otg = usbhs_get_dparam(priv, has_otg); 108 109 if (has_otg) 110 usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); 111 112 /* 113 * if enable 114 * 115 * - select Host mode 116 * - D+ Line/D- Line Pull-down 117 */ 118 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); 119 } 120 121 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) 122 { 123 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; 124 u16 val = DPRPU | HSE | USBE; 125 126 /* 127 * if enable 128 * 129 * - select Function mode 130 * - D+ Line Pull-up 131 */ 132 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); 133 } 134 135 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode) 136 { 137 usbhs_write(priv, TESTMODE, mode); 138 } 139 140 /* 141 * frame functions 142 */ 143 int usbhs_frame_get_num(struct usbhs_priv *priv) 144 { 145 return usbhs_read(priv, FRMNUM) & FRNM_MASK; 146 } 147 148 /* 149 * usb request functions 150 */ 151 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) 152 { 153 u16 val; 154 155 val = usbhs_read(priv, USBREQ); 156 req->bRequest = (val >> 8) & 0xFF; 157 req->bRequestType = (val >> 0) & 0xFF; 158 159 req->wValue = usbhs_read(priv, USBVAL); 160 req->wIndex = usbhs_read(priv, USBINDX); 161 req->wLength = usbhs_read(priv, USBLENG); 162 } 163 164 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) 165 { 166 usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); 167 usbhs_write(priv, USBVAL, req->wValue); 168 usbhs_write(priv, USBINDX, req->wIndex); 169 usbhs_write(priv, USBLENG, req->wLength); 170 171 usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); 172 } 173 174 /* 175 * bus/vbus functions 176 */ 177 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) 178 { 179 u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); 180 181 if (status != USBRST) { 182 struct device *dev = usbhs_priv_to_dev(priv); 183 dev_err(dev, "usbhs should be reset\n"); 184 } 185 186 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); 187 } 188 189 void usbhs_bus_send_reset(struct usbhs_priv *priv) 190 { 191 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); 192 } 193 194 int usbhs_bus_get_speed(struct usbhs_priv *priv) 195 { 196 u16 dvstctr = usbhs_read(priv, DVSTCTR); 197 198 switch (RHST & dvstctr) { 199 case RHST_LOW_SPEED: 200 return USB_SPEED_LOW; 201 case RHST_FULL_SPEED: 202 return USB_SPEED_FULL; 203 case RHST_HIGH_SPEED: 204 return USB_SPEED_HIGH; 205 } 206 207 return USB_SPEED_UNKNOWN; 208 } 209 210 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) 211 { 212 struct platform_device *pdev = usbhs_priv_to_pdev(priv); 213 214 return usbhs_platform_call(priv, set_vbus, pdev, enable); 215 } 216 217 static void usbhsc_bus_init(struct usbhs_priv *priv) 218 { 219 usbhs_write(priv, DVSTCTR, 0); 220 221 usbhs_vbus_ctrl(priv, 0); 222 } 223 224 /* 225 * device configuration 226 */ 227 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, 228 u16 upphub, u16 hubport, u16 speed) 229 { 230 struct device *dev = usbhs_priv_to_dev(priv); 231 u16 usbspd = 0; 232 u32 reg = DEVADD0 + (2 * devnum); 233 234 if (devnum > 10) { 235 dev_err(dev, "cannot set speed to unknown device %d\n", devnum); 236 return -EIO; 237 } 238 239 if (upphub > 0xA) { 240 dev_err(dev, "unsupported hub number %d\n", upphub); 241 return -EIO; 242 } 243 244 switch (speed) { 245 case USB_SPEED_LOW: 246 usbspd = USBSPD_SPEED_LOW; 247 break; 248 case USB_SPEED_FULL: 249 usbspd = USBSPD_SPEED_FULL; 250 break; 251 case USB_SPEED_HIGH: 252 usbspd = USBSPD_SPEED_HIGH; 253 break; 254 default: 255 dev_err(dev, "unsupported speed %d\n", speed); 256 return -EIO; 257 } 258 259 usbhs_write(priv, reg, UPPHUB(upphub) | 260 HUBPORT(hubport)| 261 USBSPD(usbspd)); 262 263 return 0; 264 } 265 266 /* 267 * local functions 268 */ 269 static void usbhsc_set_buswait(struct usbhs_priv *priv) 270 { 271 int wait = usbhs_get_dparam(priv, buswait_bwait); 272 273 /* set bus wait if platform have */ 274 if (wait) 275 usbhs_bset(priv, BUSWAIT, 0x000F, wait); 276 } 277 278 /* 279 * platform default param 280 */ 281 static u32 usbhsc_default_pipe_type[] = { 282 USB_ENDPOINT_XFER_CONTROL, 283 USB_ENDPOINT_XFER_ISOC, 284 USB_ENDPOINT_XFER_ISOC, 285 USB_ENDPOINT_XFER_BULK, 286 USB_ENDPOINT_XFER_BULK, 287 USB_ENDPOINT_XFER_BULK, 288 USB_ENDPOINT_XFER_INT, 289 USB_ENDPOINT_XFER_INT, 290 USB_ENDPOINT_XFER_INT, 291 USB_ENDPOINT_XFER_INT, 292 }; 293 294 /* 295 * power control 296 */ 297 static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) 298 { 299 struct platform_device *pdev = usbhs_priv_to_pdev(priv); 300 struct device *dev = usbhs_priv_to_dev(priv); 301 302 if (enable) { 303 /* enable PM */ 304 pm_runtime_get_sync(dev); 305 306 /* enable platform power */ 307 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); 308 309 /* USB on */ 310 usbhs_sys_clock_ctrl(priv, enable); 311 } else { 312 /* USB off */ 313 usbhs_sys_clock_ctrl(priv, enable); 314 315 /* disable platform power */ 316 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); 317 318 /* disable PM */ 319 pm_runtime_put_sync(dev); 320 } 321 } 322 323 /* 324 * hotplug 325 */ 326 static void usbhsc_hotplug(struct usbhs_priv *priv) 327 { 328 struct platform_device *pdev = usbhs_priv_to_pdev(priv); 329 struct usbhs_mod *mod = usbhs_mod_get_current(priv); 330 int id; 331 int enable; 332 int ret; 333 334 /* 335 * get vbus status from platform 336 */ 337 enable = usbhs_platform_call(priv, get_vbus, pdev); 338 339 /* 340 * get id from platform 341 */ 342 id = usbhs_platform_call(priv, get_id, pdev); 343 344 if (enable && !mod) { 345 ret = usbhs_mod_change(priv, id); 346 if (ret < 0) 347 return; 348 349 dev_dbg(&pdev->dev, "%s enable\n", __func__); 350 351 /* power on */ 352 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) 353 usbhsc_power_ctrl(priv, enable); 354 355 /* bus init */ 356 usbhsc_set_buswait(priv); 357 usbhsc_bus_init(priv); 358 359 /* module start */ 360 usbhs_mod_call(priv, start, priv); 361 362 } else if (!enable && mod) { 363 dev_dbg(&pdev->dev, "%s disable\n", __func__); 364 365 /* module stop */ 366 usbhs_mod_call(priv, stop, priv); 367 368 /* bus init */ 369 usbhsc_bus_init(priv); 370 371 /* power off */ 372 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) 373 usbhsc_power_ctrl(priv, enable); 374 375 usbhs_mod_change(priv, -1); 376 377 /* reset phy for next connection */ 378 usbhs_platform_call(priv, phy_reset, pdev); 379 } 380 } 381 382 /* 383 * notify hotplug 384 */ 385 static void usbhsc_notify_hotplug(struct work_struct *work) 386 { 387 struct usbhs_priv *priv = container_of(work, 388 struct usbhs_priv, 389 notify_hotplug_work.work); 390 usbhsc_hotplug(priv); 391 } 392 393 static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) 394 { 395 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); 396 int delay = usbhs_get_dparam(priv, detection_delay); 397 398 /* 399 * This functions will be called in interrupt. 400 * To make sure safety context, 401 * use workqueue for usbhs_notify_hotplug 402 */ 403 schedule_delayed_work(&priv->notify_hotplug_work, 404 msecs_to_jiffies(delay)); 405 return 0; 406 } 407 408 /* 409 * platform functions 410 */ 411 static int usbhs_probe(struct platform_device *pdev) 412 { 413 struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; 414 struct renesas_usbhs_driver_callback *dfunc; 415 struct usbhs_priv *priv; 416 struct resource *res; 417 unsigned int irq; 418 int ret; 419 420 /* check platform information */ 421 if (!info || 422 !info->platform_callback.get_id) { 423 dev_err(&pdev->dev, "no platform information\n"); 424 return -EINVAL; 425 } 426 427 /* platform data */ 428 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 429 irq = platform_get_irq(pdev, 0); 430 if (!res || (int)irq <= 0) { 431 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); 432 return -ENODEV; 433 } 434 435 /* usb private data */ 436 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 437 if (!priv) { 438 dev_err(&pdev->dev, "Could not allocate priv\n"); 439 return -ENOMEM; 440 } 441 442 priv->base = ioremap_nocache(res->start, resource_size(res)); 443 if (!priv->base) { 444 dev_err(&pdev->dev, "ioremap error.\n"); 445 ret = -ENOMEM; 446 goto probe_end_kfree; 447 } 448 449 /* 450 * care platform info 451 */ 452 memcpy(&priv->pfunc, 453 &info->platform_callback, 454 sizeof(struct renesas_usbhs_platform_callback)); 455 memcpy(&priv->dparam, 456 &info->driver_param, 457 sizeof(struct renesas_usbhs_driver_param)); 458 459 /* set driver callback functions for platform */ 460 dfunc = &info->driver_callback; 461 dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; 462 463 /* set default param if platform doesn't have */ 464 if (!priv->dparam.pipe_type) { 465 priv->dparam.pipe_type = usbhsc_default_pipe_type; 466 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); 467 } 468 if (!priv->dparam.pio_dma_border) 469 priv->dparam.pio_dma_border = 64; /* 64byte */ 470 471 /* FIXME */ 472 /* runtime power control ? */ 473 if (priv->pfunc.get_vbus) 474 usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); 475 476 /* 477 * priv settings 478 */ 479 priv->irq = irq; 480 priv->pdev = pdev; 481 INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); 482 spin_lock_init(usbhs_priv_to_lock(priv)); 483 484 /* call pipe and module init */ 485 ret = usbhs_pipe_probe(priv); 486 if (ret < 0) 487 goto probe_end_iounmap; 488 489 ret = usbhs_fifo_probe(priv); 490 if (ret < 0) 491 goto probe_end_pipe_exit; 492 493 ret = usbhs_mod_probe(priv); 494 if (ret < 0) 495 goto probe_end_fifo_exit; 496 497 /* dev_set_drvdata should be called after usbhs_mod_init */ 498 dev_set_drvdata(&pdev->dev, priv); 499 500 /* 501 * deviece reset here because 502 * USB device might be used in boot loader. 503 */ 504 usbhs_sys_clock_ctrl(priv, 0); 505 506 /* 507 * platform call 508 * 509 * USB phy setup might depend on CPU/Board. 510 * If platform has its callback functions, 511 * call it here. 512 */ 513 ret = usbhs_platform_call(priv, hardware_init, pdev); 514 if (ret < 0) { 515 dev_err(&pdev->dev, "platform prove failed.\n"); 516 goto probe_end_mod_exit; 517 } 518 519 /* reset phy for connection */ 520 usbhs_platform_call(priv, phy_reset, pdev); 521 522 /* power control */ 523 pm_runtime_enable(&pdev->dev); 524 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { 525 usbhsc_power_ctrl(priv, 1); 526 usbhs_mod_autonomy_mode(priv); 527 } 528 529 /* 530 * manual call notify_hotplug for cold plug 531 */ 532 ret = usbhsc_drvcllbck_notify_hotplug(pdev); 533 if (ret < 0) 534 goto probe_end_call_remove; 535 536 dev_info(&pdev->dev, "probed\n"); 537 538 return ret; 539 540 probe_end_call_remove: 541 usbhs_platform_call(priv, hardware_exit, pdev); 542 probe_end_mod_exit: 543 usbhs_mod_remove(priv); 544 probe_end_fifo_exit: 545 usbhs_fifo_remove(priv); 546 probe_end_pipe_exit: 547 usbhs_pipe_remove(priv); 548 probe_end_iounmap: 549 iounmap(priv->base); 550 probe_end_kfree: 551 kfree(priv); 552 553 dev_info(&pdev->dev, "probe failed\n"); 554 555 return ret; 556 } 557 558 static int __devexit usbhs_remove(struct platform_device *pdev) 559 { 560 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); 561 struct renesas_usbhs_platform_info *info = pdev->dev.platform_data; 562 struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; 563 564 dev_dbg(&pdev->dev, "usb remove\n"); 565 566 dfunc->notify_hotplug = NULL; 567 568 /* power off */ 569 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) 570 usbhsc_power_ctrl(priv, 0); 571 572 pm_runtime_disable(&pdev->dev); 573 574 usbhs_platform_call(priv, hardware_exit, pdev); 575 usbhs_mod_remove(priv); 576 usbhs_fifo_remove(priv); 577 usbhs_pipe_remove(priv); 578 iounmap(priv->base); 579 kfree(priv); 580 581 return 0; 582 } 583 584 static int usbhsc_suspend(struct device *dev) 585 { 586 struct usbhs_priv *priv = dev_get_drvdata(dev); 587 struct usbhs_mod *mod = usbhs_mod_get_current(priv); 588 589 if (mod) { 590 usbhs_mod_call(priv, stop, priv); 591 usbhs_mod_change(priv, -1); 592 } 593 594 if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) 595 usbhsc_power_ctrl(priv, 0); 596 597 return 0; 598 } 599 600 static int usbhsc_resume(struct device *dev) 601 { 602 struct usbhs_priv *priv = dev_get_drvdata(dev); 603 struct platform_device *pdev = usbhs_priv_to_pdev(priv); 604 605 usbhs_platform_call(priv, phy_reset, pdev); 606 607 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) 608 usbhsc_power_ctrl(priv, 1); 609 610 usbhsc_hotplug(priv); 611 612 return 0; 613 } 614 615 static int usbhsc_runtime_nop(struct device *dev) 616 { 617 /* Runtime PM callback shared between ->runtime_suspend() 618 * and ->runtime_resume(). Simply returns success. 619 * 620 * This driver re-initializes all registers after 621 * pm_runtime_get_sync() anyway so there is no need 622 * to save and restore registers here. 623 */ 624 return 0; 625 } 626 627 static const struct dev_pm_ops usbhsc_pm_ops = { 628 .suspend = usbhsc_suspend, 629 .resume = usbhsc_resume, 630 .runtime_suspend = usbhsc_runtime_nop, 631 .runtime_resume = usbhsc_runtime_nop, 632 }; 633 634 static struct platform_driver renesas_usbhs_driver = { 635 .driver = { 636 .name = "renesas_usbhs", 637 .pm = &usbhsc_pm_ops, 638 }, 639 .probe = usbhs_probe, 640 .remove = __devexit_p(usbhs_remove), 641 }; 642 643 module_platform_driver(renesas_usbhs_driver); 644 645 MODULE_LICENSE("GPL"); 646 MODULE_DESCRIPTION("Renesas USB driver"); 647 MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); 648