1 /* 2 * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. 3 * 4 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * Author: Hema HK <hemahk@ti.com> 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 20 * 21 */ 22 23 #include <linux/module.h> 24 #include <linux/init.h> 25 #include <linux/interrupt.h> 26 #include <linux/platform_device.h> 27 #include <linux/io.h> 28 #include <linux/usb/musb-omap.h> 29 #include <linux/usb/phy_companion.h> 30 #include <linux/phy/omap_usb.h> 31 #include <linux/i2c/twl.h> 32 #include <linux/regulator/consumer.h> 33 #include <linux/err.h> 34 #include <linux/slab.h> 35 #include <linux/delay.h> 36 #include <linux/of.h> 37 38 /* usb register definitions */ 39 #define USB_VENDOR_ID_LSB 0x00 40 #define USB_VENDOR_ID_MSB 0x01 41 #define USB_PRODUCT_ID_LSB 0x02 42 #define USB_PRODUCT_ID_MSB 0x03 43 #define USB_VBUS_CTRL_SET 0x04 44 #define USB_VBUS_CTRL_CLR 0x05 45 #define USB_ID_CTRL_SET 0x06 46 #define USB_ID_CTRL_CLR 0x07 47 #define USB_VBUS_INT_SRC 0x08 48 #define USB_VBUS_INT_LATCH_SET 0x09 49 #define USB_VBUS_INT_LATCH_CLR 0x0A 50 #define USB_VBUS_INT_EN_LO_SET 0x0B 51 #define USB_VBUS_INT_EN_LO_CLR 0x0C 52 #define USB_VBUS_INT_EN_HI_SET 0x0D 53 #define USB_VBUS_INT_EN_HI_CLR 0x0E 54 #define USB_ID_INT_SRC 0x0F 55 #define USB_ID_INT_LATCH_SET 0x10 56 #define USB_ID_INT_LATCH_CLR 0x11 57 58 #define USB_ID_INT_EN_LO_SET 0x12 59 #define USB_ID_INT_EN_LO_CLR 0x13 60 #define USB_ID_INT_EN_HI_SET 0x14 61 #define USB_ID_INT_EN_HI_CLR 0x15 62 #define USB_OTG_ADP_CTRL 0x16 63 #define USB_OTG_ADP_HIGH 0x17 64 #define USB_OTG_ADP_LOW 0x18 65 #define USB_OTG_ADP_RISE 0x19 66 #define USB_OTG_REVISION 0x1A 67 68 /* to be moved to LDO */ 69 #define TWL6030_MISC2 0xE5 70 #define TWL6030_CFG_LDO_PD2 0xF5 71 #define TWL6030_BACKUP_REG 0xFA 72 73 #define STS_HW_CONDITIONS 0x21 74 75 /* In module TWL6030_MODULE_PM_MASTER */ 76 #define STS_HW_CONDITIONS 0x21 77 #define STS_USB_ID BIT(2) 78 79 /* In module TWL6030_MODULE_PM_RECEIVER */ 80 #define VUSB_CFG_TRANS 0x71 81 #define VUSB_CFG_STATE 0x72 82 #define VUSB_CFG_VOLTAGE 0x73 83 84 /* in module TWL6030_MODULE_MAIN_CHARGE */ 85 86 #define CHARGERUSB_CTRL1 0x8 87 88 #define CONTROLLER_STAT1 0x03 89 #define VBUS_DET BIT(2) 90 91 struct twl6030_usb { 92 struct phy_companion comparator; 93 struct device *dev; 94 95 /* for vbus reporting with irqs disabled */ 96 spinlock_t lock; 97 98 struct regulator *usb3v3; 99 100 /* used to set vbus, in atomic path */ 101 struct work_struct set_vbus_work; 102 103 int irq1; 104 int irq2; 105 enum omap_musb_vbus_id_status linkstat; 106 u8 asleep; 107 bool vbus_enable; 108 const char *regulator; 109 }; 110 111 #define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator) 112 113 /*-------------------------------------------------------------------------*/ 114 115 static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, 116 u8 data, u8 address) 117 { 118 int ret = 0; 119 120 ret = twl_i2c_write_u8(module, data, address); 121 if (ret < 0) 122 dev_err(twl->dev, 123 "Write[0x%x] Error %d\n", address, ret); 124 return ret; 125 } 126 127 static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) 128 { 129 u8 data; 130 int ret; 131 132 ret = twl_i2c_read_u8(module, &data, address); 133 if (ret >= 0) 134 ret = data; 135 else 136 dev_err(twl->dev, 137 "readb[0x%x,0x%x] Error %d\n", 138 module, address, ret); 139 return ret; 140 } 141 142 static int twl6030_start_srp(struct phy_companion *comparator) 143 { 144 struct twl6030_usb *twl = comparator_to_twl(comparator); 145 146 twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); 147 twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); 148 149 mdelay(100); 150 twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR); 151 152 return 0; 153 } 154 155 static int twl6030_usb_ldo_init(struct twl6030_usb *twl) 156 { 157 /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ 158 twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); 159 160 /* Program CFG_LDO_PD2 register and set VUSB bit */ 161 twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); 162 163 /* Program MISC2 register and set bit VUSB_IN_VBAT */ 164 twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); 165 166 twl->usb3v3 = regulator_get(twl->dev, twl->regulator); 167 if (IS_ERR(twl->usb3v3)) 168 return -ENODEV; 169 170 /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ 171 twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); 172 173 /* 174 * Program the USB_ID_CTRL_SET register to enable GND drive 175 * and the ID comparators 176 */ 177 twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); 178 179 return 0; 180 } 181 182 static ssize_t twl6030_usb_vbus_show(struct device *dev, 183 struct device_attribute *attr, char *buf) 184 { 185 struct twl6030_usb *twl = dev_get_drvdata(dev); 186 unsigned long flags; 187 int ret = -EINVAL; 188 189 spin_lock_irqsave(&twl->lock, flags); 190 191 switch (twl->linkstat) { 192 case OMAP_MUSB_VBUS_VALID: 193 ret = snprintf(buf, PAGE_SIZE, "vbus\n"); 194 break; 195 case OMAP_MUSB_ID_GROUND: 196 ret = snprintf(buf, PAGE_SIZE, "id\n"); 197 break; 198 case OMAP_MUSB_VBUS_OFF: 199 ret = snprintf(buf, PAGE_SIZE, "none\n"); 200 break; 201 default: 202 ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); 203 } 204 spin_unlock_irqrestore(&twl->lock, flags); 205 206 return ret; 207 } 208 static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); 209 210 static irqreturn_t twl6030_usb_irq(int irq, void *_twl) 211 { 212 struct twl6030_usb *twl = _twl; 213 enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; 214 u8 vbus_state, hw_state; 215 int ret; 216 217 hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); 218 219 vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, 220 CONTROLLER_STAT1); 221 if (!(hw_state & STS_USB_ID)) { 222 if (vbus_state & VBUS_DET) { 223 ret = regulator_enable(twl->usb3v3); 224 if (ret) 225 dev_err(twl->dev, "Failed to enable usb3v3\n"); 226 227 twl->asleep = 1; 228 status = OMAP_MUSB_VBUS_VALID; 229 twl->linkstat = status; 230 omap_musb_mailbox(status); 231 } else { 232 if (twl->linkstat != OMAP_MUSB_UNKNOWN) { 233 status = OMAP_MUSB_VBUS_OFF; 234 twl->linkstat = status; 235 omap_musb_mailbox(status); 236 if (twl->asleep) { 237 regulator_disable(twl->usb3v3); 238 twl->asleep = 0; 239 } 240 } 241 } 242 } 243 sysfs_notify(&twl->dev->kobj, NULL, "vbus"); 244 245 return IRQ_HANDLED; 246 } 247 248 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) 249 { 250 struct twl6030_usb *twl = _twl; 251 enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; 252 u8 hw_state; 253 int ret; 254 255 hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); 256 257 if (hw_state & STS_USB_ID) { 258 ret = regulator_enable(twl->usb3v3); 259 if (ret) 260 dev_err(twl->dev, "Failed to enable usb3v3\n"); 261 262 twl->asleep = 1; 263 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); 264 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); 265 status = OMAP_MUSB_ID_GROUND; 266 twl->linkstat = status; 267 omap_musb_mailbox(status); 268 } else { 269 twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); 270 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); 271 } 272 twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR); 273 274 return IRQ_HANDLED; 275 } 276 277 static int twl6030_enable_irq(struct twl6030_usb *twl) 278 { 279 twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); 280 twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); 281 twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); 282 283 twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, 284 REG_INT_MSK_LINE_C); 285 twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, 286 REG_INT_MSK_STS_C); 287 twl6030_usb_irq(twl->irq2, twl); 288 twl6030_usbotg_irq(twl->irq1, twl); 289 290 return 0; 291 } 292 293 static void otg_set_vbus_work(struct work_struct *data) 294 { 295 struct twl6030_usb *twl = container_of(data, struct twl6030_usb, 296 set_vbus_work); 297 298 /* 299 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 300 * register. This enables boost mode. 301 */ 302 303 if (twl->vbus_enable) 304 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, 305 CHARGERUSB_CTRL1); 306 else 307 twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, 308 CHARGERUSB_CTRL1); 309 } 310 311 static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled) 312 { 313 struct twl6030_usb *twl = comparator_to_twl(comparator); 314 315 twl->vbus_enable = enabled; 316 schedule_work(&twl->set_vbus_work); 317 318 return 0; 319 } 320 321 static int twl6030_usb_probe(struct platform_device *pdev) 322 { 323 u32 ret; 324 struct twl6030_usb *twl; 325 int status, err; 326 struct device_node *np = pdev->dev.of_node; 327 struct device *dev = &pdev->dev; 328 struct twl4030_usb_data *pdata = dev_get_platdata(dev); 329 330 twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL); 331 if (!twl) 332 return -ENOMEM; 333 334 twl->dev = &pdev->dev; 335 twl->irq1 = platform_get_irq(pdev, 0); 336 twl->irq2 = platform_get_irq(pdev, 1); 337 twl->linkstat = OMAP_MUSB_UNKNOWN; 338 339 twl->comparator.set_vbus = twl6030_set_vbus; 340 twl->comparator.start_srp = twl6030_start_srp; 341 342 ret = omap_usb2_set_comparator(&twl->comparator); 343 if (ret == -ENODEV) { 344 dev_info(&pdev->dev, "phy not ready, deferring probe"); 345 return -EPROBE_DEFER; 346 } 347 348 if (np) { 349 twl->regulator = "usb"; 350 } else if (pdata) { 351 if (pdata->features & TWL6032_SUBCLASS) 352 twl->regulator = "ldousb"; 353 else 354 twl->regulator = "vusb"; 355 } else { 356 dev_err(&pdev->dev, "twl6030 initialized without pdata\n"); 357 return -EINVAL; 358 } 359 360 /* init spinlock for workqueue */ 361 spin_lock_init(&twl->lock); 362 363 err = twl6030_usb_ldo_init(twl); 364 if (err) { 365 dev_err(&pdev->dev, "ldo init failed\n"); 366 return err; 367 } 368 369 platform_set_drvdata(pdev, twl); 370 if (device_create_file(&pdev->dev, &dev_attr_vbus)) 371 dev_warn(&pdev->dev, "could not create sysfs file\n"); 372 373 INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); 374 375 status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, 376 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, 377 "twl6030_usb", twl); 378 if (status < 0) { 379 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", 380 twl->irq1, status); 381 device_remove_file(twl->dev, &dev_attr_vbus); 382 return status; 383 } 384 385 status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, 386 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, 387 "twl6030_usb", twl); 388 if (status < 0) { 389 dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", 390 twl->irq2, status); 391 free_irq(twl->irq1, twl); 392 device_remove_file(twl->dev, &dev_attr_vbus); 393 return status; 394 } 395 396 twl->asleep = 0; 397 twl6030_enable_irq(twl); 398 dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); 399 400 return 0; 401 } 402 403 static int twl6030_usb_remove(struct platform_device *pdev) 404 { 405 struct twl6030_usb *twl = platform_get_drvdata(pdev); 406 407 twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, 408 REG_INT_MSK_LINE_C); 409 twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, 410 REG_INT_MSK_STS_C); 411 free_irq(twl->irq1, twl); 412 free_irq(twl->irq2, twl); 413 regulator_put(twl->usb3v3); 414 device_remove_file(twl->dev, &dev_attr_vbus); 415 cancel_work_sync(&twl->set_vbus_work); 416 417 return 0; 418 } 419 420 #ifdef CONFIG_OF 421 static const struct of_device_id twl6030_usb_id_table[] = { 422 { .compatible = "ti,twl6030-usb" }, 423 {} 424 }; 425 MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); 426 #endif 427 428 static struct platform_driver twl6030_usb_driver = { 429 .probe = twl6030_usb_probe, 430 .remove = twl6030_usb_remove, 431 .driver = { 432 .name = "twl6030_usb", 433 .of_match_table = of_match_ptr(twl6030_usb_id_table), 434 }, 435 }; 436 437 static int __init twl6030_usb_init(void) 438 { 439 return platform_driver_register(&twl6030_usb_driver); 440 } 441 subsys_initcall(twl6030_usb_init); 442 443 static void __exit twl6030_usb_exit(void) 444 { 445 platform_driver_unregister(&twl6030_usb_driver); 446 } 447 module_exit(twl6030_usb_exit); 448 449 MODULE_ALIAS("platform:twl6030_usb"); 450 MODULE_AUTHOR("Hema HK <hemahk@ti.com>"); 451 MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); 452 MODULE_LICENSE("GPL"); 453