1 /* 2 * MUSB OTG driver virtual root hub support 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2006 by Texas Instruments 6 * Copyright (C) 2006-2007 Nokia Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * version 2 as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 20 * 02110-1301 USA 21 * 22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 */ 34 35 #include <linux/module.h> 36 #include <linux/kernel.h> 37 #include <linux/sched.h> 38 #include <linux/errno.h> 39 #include <linux/init.h> 40 #include <linux/time.h> 41 #include <linux/timer.h> 42 43 #include <asm/unaligned.h> 44 45 #include "musb_core.h" 46 47 48 static void musb_port_suspend(struct musb *musb, bool do_suspend) 49 { 50 struct usb_otg *otg = musb->xceiv->otg; 51 u8 power; 52 void __iomem *mbase = musb->mregs; 53 54 if (!is_host_active(musb)) 55 return; 56 57 /* NOTE: this doesn't necessarily put PHY into low power mode, 58 * turning off its clock; that's a function of PHY integration and 59 * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect 60 * SE0 changing to connect (J) or wakeup (K) states. 61 */ 62 power = musb_readb(mbase, MUSB_POWER); 63 if (do_suspend) { 64 int retries = 10000; 65 66 power &= ~MUSB_POWER_RESUME; 67 power |= MUSB_POWER_SUSPENDM; 68 musb_writeb(mbase, MUSB_POWER, power); 69 70 /* Needed for OPT A tests */ 71 power = musb_readb(mbase, MUSB_POWER); 72 while (power & MUSB_POWER_SUSPENDM) { 73 power = musb_readb(mbase, MUSB_POWER); 74 if (retries-- < 1) 75 break; 76 } 77 78 dev_dbg(musb->controller, "Root port suspended, power %02x\n", power); 79 80 musb->port1_status |= USB_PORT_STAT_SUSPEND; 81 switch (musb->xceiv->state) { 82 case OTG_STATE_A_HOST: 83 musb->xceiv->state = OTG_STATE_A_SUSPEND; 84 musb->is_active = otg->host->b_hnp_enable; 85 if (musb->is_active) 86 mod_timer(&musb->otg_timer, jiffies 87 + msecs_to_jiffies( 88 OTG_TIME_A_AIDL_BDIS)); 89 musb_platform_try_idle(musb, 0); 90 break; 91 case OTG_STATE_B_HOST: 92 musb->xceiv->state = OTG_STATE_B_WAIT_ACON; 93 musb->is_active = otg->host->b_hnp_enable; 94 musb_platform_try_idle(musb, 0); 95 break; 96 default: 97 dev_dbg(musb->controller, "bogus rh suspend? %s\n", 98 otg_state_string(musb->xceiv->state)); 99 } 100 } else if (power & MUSB_POWER_SUSPENDM) { 101 power &= ~MUSB_POWER_SUSPENDM; 102 power |= MUSB_POWER_RESUME; 103 musb_writeb(mbase, MUSB_POWER, power); 104 105 dev_dbg(musb->controller, "Root port resuming, power %02x\n", power); 106 107 /* later, GetPortStatus will stop RESUME signaling */ 108 musb->port1_status |= MUSB_PORT_STAT_RESUME; 109 musb->rh_timer = jiffies + msecs_to_jiffies(20); 110 } 111 } 112 113 static void musb_port_reset(struct musb *musb, bool do_reset) 114 { 115 u8 power; 116 void __iomem *mbase = musb->mregs; 117 118 if (musb->xceiv->state == OTG_STATE_B_IDLE) { 119 dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n"); 120 musb->port1_status &= ~USB_PORT_STAT_RESET; 121 return; 122 } 123 124 if (!is_host_active(musb)) 125 return; 126 127 /* NOTE: caller guarantees it will turn off the reset when 128 * the appropriate amount of time has passed 129 */ 130 power = musb_readb(mbase, MUSB_POWER); 131 if (do_reset) { 132 133 /* 134 * If RESUME is set, we must make sure it stays minimum 20 ms. 135 * Then we must clear RESUME and wait a bit to let musb start 136 * generating SOFs. If we don't do this, OPT HS A 6.8 tests 137 * fail with "Error! Did not receive an SOF before suspend 138 * detected". 139 */ 140 if (power & MUSB_POWER_RESUME) { 141 while (time_before(jiffies, musb->rh_timer)) 142 msleep(1); 143 musb_writeb(mbase, MUSB_POWER, 144 power & ~MUSB_POWER_RESUME); 145 msleep(1); 146 } 147 148 musb->ignore_disconnect = true; 149 power &= 0xf0; 150 musb_writeb(mbase, MUSB_POWER, 151 power | MUSB_POWER_RESET); 152 153 musb->port1_status |= USB_PORT_STAT_RESET; 154 musb->port1_status &= ~USB_PORT_STAT_ENABLE; 155 musb->rh_timer = jiffies + msecs_to_jiffies(50); 156 } else { 157 dev_dbg(musb->controller, "root port reset stopped\n"); 158 musb_writeb(mbase, MUSB_POWER, 159 power & ~MUSB_POWER_RESET); 160 161 musb->ignore_disconnect = false; 162 163 power = musb_readb(mbase, MUSB_POWER); 164 if (power & MUSB_POWER_HSMODE) { 165 dev_dbg(musb->controller, "high-speed device connected\n"); 166 musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; 167 } 168 169 musb->port1_status &= ~USB_PORT_STAT_RESET; 170 musb->port1_status |= USB_PORT_STAT_ENABLE 171 | (USB_PORT_STAT_C_RESET << 16) 172 | (USB_PORT_STAT_C_ENABLE << 16); 173 usb_hcd_poll_rh_status(musb_to_hcd(musb)); 174 175 musb->vbuserr_retry = VBUSERR_RETRY_COUNT; 176 } 177 } 178 179 void musb_root_disconnect(struct musb *musb) 180 { 181 struct usb_otg *otg = musb->xceiv->otg; 182 183 musb->port1_status = USB_PORT_STAT_POWER 184 | (USB_PORT_STAT_C_CONNECTION << 16); 185 186 usb_hcd_poll_rh_status(musb_to_hcd(musb)); 187 musb->is_active = 0; 188 189 switch (musb->xceiv->state) { 190 case OTG_STATE_A_SUSPEND: 191 if (otg->host->b_hnp_enable) { 192 musb->xceiv->state = OTG_STATE_A_PERIPHERAL; 193 musb->g.is_a_peripheral = 1; 194 break; 195 } 196 /* FALLTHROUGH */ 197 case OTG_STATE_A_HOST: 198 musb->xceiv->state = OTG_STATE_A_WAIT_BCON; 199 musb->is_active = 0; 200 break; 201 case OTG_STATE_A_WAIT_VFALL: 202 musb->xceiv->state = OTG_STATE_B_IDLE; 203 break; 204 default: 205 dev_dbg(musb->controller, "host disconnect (%s)\n", 206 otg_state_string(musb->xceiv->state)); 207 } 208 } 209 210 211 /*---------------------------------------------------------------------*/ 212 213 /* Caller may or may not hold musb->lock */ 214 int musb_hub_status_data(struct usb_hcd *hcd, char *buf) 215 { 216 struct musb *musb = hcd_to_musb(hcd); 217 int retval = 0; 218 219 /* called in_irq() via usb_hcd_poll_rh_status() */ 220 if (musb->port1_status & 0xffff0000) { 221 *buf = 0x02; 222 retval = 1; 223 } 224 return retval; 225 } 226 227 int musb_hub_control( 228 struct usb_hcd *hcd, 229 u16 typeReq, 230 u16 wValue, 231 u16 wIndex, 232 char *buf, 233 u16 wLength) 234 { 235 struct musb *musb = hcd_to_musb(hcd); 236 u32 temp; 237 int retval = 0; 238 unsigned long flags; 239 240 spin_lock_irqsave(&musb->lock, flags); 241 242 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { 243 spin_unlock_irqrestore(&musb->lock, flags); 244 return -ESHUTDOWN; 245 } 246 247 /* hub features: always zero, setting is a NOP 248 * port features: reported, sometimes updated when host is active 249 * no indicators 250 */ 251 switch (typeReq) { 252 case ClearHubFeature: 253 case SetHubFeature: 254 switch (wValue) { 255 case C_HUB_OVER_CURRENT: 256 case C_HUB_LOCAL_POWER: 257 break; 258 default: 259 goto error; 260 } 261 break; 262 case ClearPortFeature: 263 if ((wIndex & 0xff) != 1) 264 goto error; 265 266 switch (wValue) { 267 case USB_PORT_FEAT_ENABLE: 268 break; 269 case USB_PORT_FEAT_SUSPEND: 270 musb_port_suspend(musb, false); 271 break; 272 case USB_PORT_FEAT_POWER: 273 if (!hcd->self.is_b_host) 274 musb_platform_set_vbus(musb, 0); 275 break; 276 case USB_PORT_FEAT_C_CONNECTION: 277 case USB_PORT_FEAT_C_ENABLE: 278 case USB_PORT_FEAT_C_OVER_CURRENT: 279 case USB_PORT_FEAT_C_RESET: 280 case USB_PORT_FEAT_C_SUSPEND: 281 break; 282 default: 283 goto error; 284 } 285 dev_dbg(musb->controller, "clear feature %d\n", wValue); 286 musb->port1_status &= ~(1 << wValue); 287 break; 288 case GetHubDescriptor: 289 { 290 struct usb_hub_descriptor *desc = (void *)buf; 291 292 desc->bDescLength = 9; 293 desc->bDescriptorType = 0x29; 294 desc->bNbrPorts = 1; 295 desc->wHubCharacteristics = cpu_to_le16( 296 0x0001 /* per-port power switching */ 297 | 0x0010 /* no overcurrent reporting */ 298 ); 299 desc->bPwrOn2PwrGood = 5; /* msec/2 */ 300 desc->bHubContrCurrent = 0; 301 302 /* workaround bogus struct definition */ 303 desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ 304 desc->u.hs.DeviceRemovable[1] = 0xff; 305 } 306 break; 307 case GetHubStatus: 308 temp = 0; 309 *(__le32 *) buf = cpu_to_le32(temp); 310 break; 311 case GetPortStatus: 312 if (wIndex != 1) 313 goto error; 314 315 /* finish RESET signaling? */ 316 if ((musb->port1_status & USB_PORT_STAT_RESET) 317 && time_after_eq(jiffies, musb->rh_timer)) 318 musb_port_reset(musb, false); 319 320 /* finish RESUME signaling? */ 321 if ((musb->port1_status & MUSB_PORT_STAT_RESUME) 322 && time_after_eq(jiffies, musb->rh_timer)) { 323 u8 power; 324 325 power = musb_readb(musb->mregs, MUSB_POWER); 326 power &= ~MUSB_POWER_RESUME; 327 dev_dbg(musb->controller, "root port resume stopped, power %02x\n", 328 power); 329 musb_writeb(musb->mregs, MUSB_POWER, power); 330 331 /* ISSUE: DaVinci (RTL 1.300) disconnects after 332 * resume of high speed peripherals (but not full 333 * speed ones). 334 */ 335 336 musb->is_active = 1; 337 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND 338 | MUSB_PORT_STAT_RESUME); 339 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; 340 usb_hcd_poll_rh_status(musb_to_hcd(musb)); 341 /* NOTE: it might really be A_WAIT_BCON ... */ 342 musb->xceiv->state = OTG_STATE_A_HOST; 343 } 344 345 put_unaligned(cpu_to_le32(musb->port1_status 346 & ~MUSB_PORT_STAT_RESUME), 347 (__le32 *) buf); 348 349 /* port change status is more interesting */ 350 dev_dbg(musb->controller, "port status %08x\n", 351 musb->port1_status); 352 break; 353 case SetPortFeature: 354 if ((wIndex & 0xff) != 1) 355 goto error; 356 357 switch (wValue) { 358 case USB_PORT_FEAT_POWER: 359 /* NOTE: this controller has a strange state machine 360 * that involves "requesting sessions" according to 361 * magic side effects from incompletely-described 362 * rules about startup... 363 * 364 * This call is what really starts the host mode; be 365 * very careful about side effects if you reorder any 366 * initialization logic, e.g. for OTG, or change any 367 * logic relating to VBUS power-up. 368 */ 369 if (!hcd->self.is_b_host) 370 musb_start(musb); 371 break; 372 case USB_PORT_FEAT_RESET: 373 musb_port_reset(musb, true); 374 break; 375 case USB_PORT_FEAT_SUSPEND: 376 musb_port_suspend(musb, true); 377 break; 378 case USB_PORT_FEAT_TEST: 379 if (unlikely(is_host_active(musb))) 380 goto error; 381 382 wIndex >>= 8; 383 switch (wIndex) { 384 case 1: 385 pr_debug("TEST_J\n"); 386 temp = MUSB_TEST_J; 387 break; 388 case 2: 389 pr_debug("TEST_K\n"); 390 temp = MUSB_TEST_K; 391 break; 392 case 3: 393 pr_debug("TEST_SE0_NAK\n"); 394 temp = MUSB_TEST_SE0_NAK; 395 break; 396 case 4: 397 pr_debug("TEST_PACKET\n"); 398 temp = MUSB_TEST_PACKET; 399 musb_load_testpacket(musb); 400 break; 401 case 5: 402 pr_debug("TEST_FORCE_ENABLE\n"); 403 temp = MUSB_TEST_FORCE_HOST 404 | MUSB_TEST_FORCE_HS; 405 406 musb_writeb(musb->mregs, MUSB_DEVCTL, 407 MUSB_DEVCTL_SESSION); 408 break; 409 case 6: 410 pr_debug("TEST_FIFO_ACCESS\n"); 411 temp = MUSB_TEST_FIFO_ACCESS; 412 break; 413 default: 414 goto error; 415 } 416 musb_writeb(musb->mregs, MUSB_TESTMODE, temp); 417 break; 418 default: 419 goto error; 420 } 421 dev_dbg(musb->controller, "set feature %d\n", wValue); 422 musb->port1_status |= 1 << wValue; 423 break; 424 425 default: 426 error: 427 /* "protocol stall" on error */ 428 retval = -EPIPE; 429 } 430 spin_unlock_irqrestore(&musb->lock, flags); 431 return retval; 432 } 433