1 /* 2 * MUSB OTG driver virtual root hub support 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2006 by Texas Instruments 6 * Copyright (C) 2006-2007 Nokia Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * version 2 as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 20 * 02110-1301 USA 21 * 22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 */ 34 35 #include <linux/module.h> 36 #include <linux/kernel.h> 37 #include <linux/sched.h> 38 #include <linux/errno.h> 39 #include <linux/time.h> 40 #include <linux/timer.h> 41 42 #include <asm/unaligned.h> 43 44 #include "musb_core.h" 45 46 void musb_host_finish_resume(struct work_struct *work) 47 { 48 struct musb *musb; 49 unsigned long flags; 50 u8 power; 51 52 musb = container_of(work, struct musb, finish_resume_work.work); 53 54 spin_lock_irqsave(&musb->lock, flags); 55 56 power = musb_readb(musb->mregs, MUSB_POWER); 57 power &= ~MUSB_POWER_RESUME; 58 dev_dbg(musb->controller, "root port resume stopped, power %02x\n", 59 power); 60 musb_writeb(musb->mregs, MUSB_POWER, power); 61 62 /* 63 * ISSUE: DaVinci (RTL 1.300) disconnects after 64 * resume of high speed peripherals (but not full 65 * speed ones). 66 */ 67 musb->is_active = 1; 68 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME); 69 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; 70 usb_hcd_poll_rh_status(musb->hcd); 71 /* NOTE: it might really be A_WAIT_BCON ... */ 72 musb->xceiv->otg->state = OTG_STATE_A_HOST; 73 74 spin_unlock_irqrestore(&musb->lock, flags); 75 } 76 77 void musb_port_suspend(struct musb *musb, bool do_suspend) 78 { 79 struct usb_otg *otg = musb->xceiv->otg; 80 u8 power; 81 void __iomem *mbase = musb->mregs; 82 83 if (!is_host_active(musb)) 84 return; 85 86 /* NOTE: this doesn't necessarily put PHY into low power mode, 87 * turning off its clock; that's a function of PHY integration and 88 * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect 89 * SE0 changing to connect (J) or wakeup (K) states. 90 */ 91 power = musb_readb(mbase, MUSB_POWER); 92 if (do_suspend) { 93 int retries = 10000; 94 95 power &= ~MUSB_POWER_RESUME; 96 power |= MUSB_POWER_SUSPENDM; 97 musb_writeb(mbase, MUSB_POWER, power); 98 99 /* Needed for OPT A tests */ 100 power = musb_readb(mbase, MUSB_POWER); 101 while (power & MUSB_POWER_SUSPENDM) { 102 power = musb_readb(mbase, MUSB_POWER); 103 if (retries-- < 1) 104 break; 105 } 106 107 dev_dbg(musb->controller, "Root port suspended, power %02x\n", power); 108 109 musb->port1_status |= USB_PORT_STAT_SUSPEND; 110 switch (musb->xceiv->otg->state) { 111 case OTG_STATE_A_HOST: 112 musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; 113 musb->is_active = otg->host->b_hnp_enable; 114 if (musb->is_active) 115 mod_timer(&musb->otg_timer, jiffies 116 + msecs_to_jiffies( 117 OTG_TIME_A_AIDL_BDIS)); 118 musb_platform_try_idle(musb, 0); 119 break; 120 case OTG_STATE_B_HOST: 121 musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; 122 musb->is_active = otg->host->b_hnp_enable; 123 musb_platform_try_idle(musb, 0); 124 break; 125 default: 126 dev_dbg(musb->controller, "bogus rh suspend? %s\n", 127 usb_otg_state_string(musb->xceiv->otg->state)); 128 } 129 } else if (power & MUSB_POWER_SUSPENDM) { 130 power &= ~MUSB_POWER_SUSPENDM; 131 power |= MUSB_POWER_RESUME; 132 musb_writeb(mbase, MUSB_POWER, power); 133 134 dev_dbg(musb->controller, "Root port resuming, power %02x\n", power); 135 136 /* later, GetPortStatus will stop RESUME signaling */ 137 musb->port1_status |= MUSB_PORT_STAT_RESUME; 138 schedule_delayed_work(&musb->finish_resume_work, 139 msecs_to_jiffies(USB_RESUME_TIMEOUT)); 140 } 141 } 142 143 void musb_port_reset(struct musb *musb, bool do_reset) 144 { 145 u8 power; 146 void __iomem *mbase = musb->mregs; 147 148 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) { 149 dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n"); 150 musb->port1_status &= ~USB_PORT_STAT_RESET; 151 return; 152 } 153 154 if (!is_host_active(musb)) 155 return; 156 157 /* NOTE: caller guarantees it will turn off the reset when 158 * the appropriate amount of time has passed 159 */ 160 power = musb_readb(mbase, MUSB_POWER); 161 if (do_reset) { 162 /* 163 * If RESUME is set, we must make sure it stays minimum 20 ms. 164 * Then we must clear RESUME and wait a bit to let musb start 165 * generating SOFs. If we don't do this, OPT HS A 6.8 tests 166 * fail with "Error! Did not receive an SOF before suspend 167 * detected". 168 */ 169 if (power & MUSB_POWER_RESUME) { 170 long remain = (unsigned long) musb->rh_timer - jiffies; 171 172 if (musb->rh_timer > 0 && remain > 0) { 173 /* take into account the minimum delay after resume */ 174 schedule_delayed_work( 175 &musb->deassert_reset_work, remain); 176 return; 177 } 178 179 musb_writeb(mbase, MUSB_POWER, 180 power & ~MUSB_POWER_RESUME); 181 182 /* Give the core 1 ms to clear MUSB_POWER_RESUME */ 183 schedule_delayed_work(&musb->deassert_reset_work, 184 msecs_to_jiffies(1)); 185 return; 186 } 187 188 power &= 0xf0; 189 musb_writeb(mbase, MUSB_POWER, 190 power | MUSB_POWER_RESET); 191 192 musb->port1_status |= USB_PORT_STAT_RESET; 193 musb->port1_status &= ~USB_PORT_STAT_ENABLE; 194 schedule_delayed_work(&musb->deassert_reset_work, 195 msecs_to_jiffies(50)); 196 } else { 197 dev_dbg(musb->controller, "root port reset stopped\n"); 198 musb_platform_pre_root_reset_end(musb); 199 musb_writeb(mbase, MUSB_POWER, 200 power & ~MUSB_POWER_RESET); 201 musb_platform_post_root_reset_end(musb); 202 203 power = musb_readb(mbase, MUSB_POWER); 204 if (power & MUSB_POWER_HSMODE) { 205 dev_dbg(musb->controller, "high-speed device connected\n"); 206 musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; 207 } 208 209 musb->port1_status &= ~USB_PORT_STAT_RESET; 210 musb->port1_status |= USB_PORT_STAT_ENABLE 211 | (USB_PORT_STAT_C_RESET << 16) 212 | (USB_PORT_STAT_C_ENABLE << 16); 213 usb_hcd_poll_rh_status(musb->hcd); 214 215 musb->vbuserr_retry = VBUSERR_RETRY_COUNT; 216 } 217 } 218 219 void musb_root_disconnect(struct musb *musb) 220 { 221 struct usb_otg *otg = musb->xceiv->otg; 222 223 musb->port1_status = USB_PORT_STAT_POWER 224 | (USB_PORT_STAT_C_CONNECTION << 16); 225 226 usb_hcd_poll_rh_status(musb->hcd); 227 musb->is_active = 0; 228 229 switch (musb->xceiv->otg->state) { 230 case OTG_STATE_A_SUSPEND: 231 if (otg->host->b_hnp_enable) { 232 musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL; 233 musb->g.is_a_peripheral = 1; 234 break; 235 } 236 /* FALLTHROUGH */ 237 case OTG_STATE_A_HOST: 238 musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; 239 musb->is_active = 0; 240 break; 241 case OTG_STATE_A_WAIT_VFALL: 242 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 243 break; 244 default: 245 dev_dbg(musb->controller, "host disconnect (%s)\n", 246 usb_otg_state_string(musb->xceiv->otg->state)); 247 } 248 } 249 250 251 /*---------------------------------------------------------------------*/ 252 253 /* Caller may or may not hold musb->lock */ 254 int musb_hub_status_data(struct usb_hcd *hcd, char *buf) 255 { 256 struct musb *musb = hcd_to_musb(hcd); 257 int retval = 0; 258 259 /* called in_irq() via usb_hcd_poll_rh_status() */ 260 if (musb->port1_status & 0xffff0000) { 261 *buf = 0x02; 262 retval = 1; 263 } 264 return retval; 265 } 266 267 static int musb_has_gadget(struct musb *musb) 268 { 269 /* 270 * In host-only mode we start a connection right away. In OTG mode 271 * we have to wait until we loaded a gadget. We don't really need a 272 * gadget if we operate as a host but we should not start a session 273 * as a device without a gadget or else we explode. 274 */ 275 #ifdef CONFIG_USB_MUSB_HOST 276 return 1; 277 #else 278 if (musb->port_mode == MUSB_PORT_MODE_HOST) 279 return 1; 280 return musb->g.dev.driver != NULL; 281 #endif 282 } 283 284 int musb_hub_control( 285 struct usb_hcd *hcd, 286 u16 typeReq, 287 u16 wValue, 288 u16 wIndex, 289 char *buf, 290 u16 wLength) 291 { 292 struct musb *musb = hcd_to_musb(hcd); 293 u32 temp; 294 int retval = 0; 295 unsigned long flags; 296 297 spin_lock_irqsave(&musb->lock, flags); 298 299 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { 300 spin_unlock_irqrestore(&musb->lock, flags); 301 return -ESHUTDOWN; 302 } 303 304 /* hub features: always zero, setting is a NOP 305 * port features: reported, sometimes updated when host is active 306 * no indicators 307 */ 308 switch (typeReq) { 309 case ClearHubFeature: 310 case SetHubFeature: 311 switch (wValue) { 312 case C_HUB_OVER_CURRENT: 313 case C_HUB_LOCAL_POWER: 314 break; 315 default: 316 goto error; 317 } 318 break; 319 case ClearPortFeature: 320 if ((wIndex & 0xff) != 1) 321 goto error; 322 323 switch (wValue) { 324 case USB_PORT_FEAT_ENABLE: 325 break; 326 case USB_PORT_FEAT_SUSPEND: 327 musb_port_suspend(musb, false); 328 break; 329 case USB_PORT_FEAT_POWER: 330 if (!hcd->self.is_b_host) 331 musb_platform_set_vbus(musb, 0); 332 break; 333 case USB_PORT_FEAT_C_CONNECTION: 334 case USB_PORT_FEAT_C_ENABLE: 335 case USB_PORT_FEAT_C_OVER_CURRENT: 336 case USB_PORT_FEAT_C_RESET: 337 case USB_PORT_FEAT_C_SUSPEND: 338 break; 339 default: 340 goto error; 341 } 342 dev_dbg(musb->controller, "clear feature %d\n", wValue); 343 musb->port1_status &= ~(1 << wValue); 344 break; 345 case GetHubDescriptor: 346 { 347 struct usb_hub_descriptor *desc = (void *)buf; 348 349 desc->bDescLength = 9; 350 desc->bDescriptorType = USB_DT_HUB; 351 desc->bNbrPorts = 1; 352 desc->wHubCharacteristics = cpu_to_le16( 353 HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */ 354 | HUB_CHAR_NO_OCPM /* no overcurrent reporting */ 355 ); 356 desc->bPwrOn2PwrGood = 5; /* msec/2 */ 357 desc->bHubContrCurrent = 0; 358 359 /* workaround bogus struct definition */ 360 desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ 361 desc->u.hs.DeviceRemovable[1] = 0xff; 362 } 363 break; 364 case GetHubStatus: 365 temp = 0; 366 *(__le32 *) buf = cpu_to_le32(temp); 367 break; 368 case GetPortStatus: 369 if (wIndex != 1) 370 goto error; 371 372 put_unaligned(cpu_to_le32(musb->port1_status 373 & ~MUSB_PORT_STAT_RESUME), 374 (__le32 *) buf); 375 376 /* port change status is more interesting */ 377 dev_dbg(musb->controller, "port status %08x\n", 378 musb->port1_status); 379 break; 380 case SetPortFeature: 381 if ((wIndex & 0xff) != 1) 382 goto error; 383 384 switch (wValue) { 385 case USB_PORT_FEAT_POWER: 386 /* NOTE: this controller has a strange state machine 387 * that involves "requesting sessions" according to 388 * magic side effects from incompletely-described 389 * rules about startup... 390 * 391 * This call is what really starts the host mode; be 392 * very careful about side effects if you reorder any 393 * initialization logic, e.g. for OTG, or change any 394 * logic relating to VBUS power-up. 395 */ 396 if (!hcd->self.is_b_host && musb_has_gadget(musb)) 397 musb_start(musb); 398 break; 399 case USB_PORT_FEAT_RESET: 400 musb_port_reset(musb, true); 401 break; 402 case USB_PORT_FEAT_SUSPEND: 403 musb_port_suspend(musb, true); 404 break; 405 case USB_PORT_FEAT_TEST: 406 if (unlikely(is_host_active(musb))) 407 goto error; 408 409 wIndex >>= 8; 410 switch (wIndex) { 411 case 1: 412 pr_debug("TEST_J\n"); 413 temp = MUSB_TEST_J; 414 break; 415 case 2: 416 pr_debug("TEST_K\n"); 417 temp = MUSB_TEST_K; 418 break; 419 case 3: 420 pr_debug("TEST_SE0_NAK\n"); 421 temp = MUSB_TEST_SE0_NAK; 422 break; 423 case 4: 424 pr_debug("TEST_PACKET\n"); 425 temp = MUSB_TEST_PACKET; 426 musb_load_testpacket(musb); 427 break; 428 case 5: 429 pr_debug("TEST_FORCE_ENABLE\n"); 430 temp = MUSB_TEST_FORCE_HOST 431 | MUSB_TEST_FORCE_HS; 432 433 musb_writeb(musb->mregs, MUSB_DEVCTL, 434 MUSB_DEVCTL_SESSION); 435 break; 436 case 6: 437 pr_debug("TEST_FIFO_ACCESS\n"); 438 temp = MUSB_TEST_FIFO_ACCESS; 439 break; 440 default: 441 goto error; 442 } 443 musb_writeb(musb->mregs, MUSB_TESTMODE, temp); 444 break; 445 default: 446 goto error; 447 } 448 dev_dbg(musb->controller, "set feature %d\n", wValue); 449 musb->port1_status |= 1 << wValue; 450 break; 451 452 default: 453 error: 454 /* "protocol stall" on error */ 455 retval = -EPIPE; 456 } 457 spin_unlock_irqrestore(&musb->lock, flags); 458 return retval; 459 } 460