xref: /linux/drivers/usb/musb/musb_regs.h (revision fcc8487d477a3452a1d0ccbdd4c5e0e1e3cb8bed)
1 /*
2  * MUSB OTG driver register defines
3  *
4  * Copyright 2005 Mentor Graphics Corporation
5  * Copyright (C) 2005-2006 by Texas Instruments
6  * Copyright (C) 2006-2007 Nokia Corporation
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
25  * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  */
34 
35 #ifndef __MUSB_REGS_H__
36 #define __MUSB_REGS_H__
37 
38 #define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
39 
40 /*
41  * MUSB Register bits
42  */
43 
44 /* POWER */
45 #define MUSB_POWER_ISOUPDATE	0x80
46 #define MUSB_POWER_SOFTCONN	0x40
47 #define MUSB_POWER_HSENAB	0x20
48 #define MUSB_POWER_HSMODE	0x10
49 #define MUSB_POWER_RESET	0x08
50 #define MUSB_POWER_RESUME	0x04
51 #define MUSB_POWER_SUSPENDM	0x02
52 #define MUSB_POWER_ENSUSPEND	0x01
53 
54 /* INTRUSB */
55 #define MUSB_INTR_SUSPEND	0x01
56 #define MUSB_INTR_RESUME	0x02
57 #define MUSB_INTR_RESET		0x04
58 #define MUSB_INTR_BABBLE	0x04
59 #define MUSB_INTR_SOF		0x08
60 #define MUSB_INTR_CONNECT	0x10
61 #define MUSB_INTR_DISCONNECT	0x20
62 #define MUSB_INTR_SESSREQ	0x40
63 #define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
64 
65 /* DEVCTL */
66 #define MUSB_DEVCTL_BDEVICE	0x80
67 #define MUSB_DEVCTL_FSDEV	0x40
68 #define MUSB_DEVCTL_LSDEV	0x20
69 #define MUSB_DEVCTL_VBUS	0x18
70 #define MUSB_DEVCTL_VBUS_SHIFT	3
71 #define MUSB_DEVCTL_HM		0x04
72 #define MUSB_DEVCTL_HR		0x02
73 #define MUSB_DEVCTL_SESSION	0x01
74 
75 /* BABBLE_CTL */
76 #define MUSB_BABBLE_FORCE_TXIDLE	0x80
77 #define MUSB_BABBLE_SW_SESSION_CTRL	0x40
78 #define MUSB_BABBLE_STUCK_J		0x20
79 #define MUSB_BABBLE_RCV_DISABLE		0x04
80 
81 /* MUSB ULPI VBUSCONTROL */
82 #define MUSB_ULPI_USE_EXTVBUS	0x01
83 #define MUSB_ULPI_USE_EXTVBUSIND 0x02
84 /* ULPI_REG_CONTROL */
85 #define MUSB_ULPI_REG_REQ	(1 << 0)
86 #define MUSB_ULPI_REG_CMPLT	(1 << 1)
87 #define MUSB_ULPI_RDN_WR	(1 << 2)
88 
89 /* TESTMODE */
90 #define MUSB_TEST_FORCE_HOST	0x80
91 #define MUSB_TEST_FIFO_ACCESS	0x40
92 #define MUSB_TEST_FORCE_FS	0x20
93 #define MUSB_TEST_FORCE_HS	0x10
94 #define MUSB_TEST_PACKET	0x08
95 #define MUSB_TEST_K		0x04
96 #define MUSB_TEST_J		0x02
97 #define MUSB_TEST_SE0_NAK	0x01
98 
99 /* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
100 #define MUSB_FIFOSZ_DPB	0x10
101 /* Allocation size (8, 16, 32, ... 4096) */
102 #define MUSB_FIFOSZ_SIZE	0x0f
103 
104 /* CSR0 */
105 #define MUSB_CSR0_FLUSHFIFO	0x0100
106 #define MUSB_CSR0_TXPKTRDY	0x0002
107 #define MUSB_CSR0_RXPKTRDY	0x0001
108 
109 /* CSR0 in Peripheral mode */
110 #define MUSB_CSR0_P_SVDSETUPEND	0x0080
111 #define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
112 #define MUSB_CSR0_P_SENDSTALL	0x0020
113 #define MUSB_CSR0_P_SETUPEND	0x0010
114 #define MUSB_CSR0_P_DATAEND	0x0008
115 #define MUSB_CSR0_P_SENTSTALL	0x0004
116 
117 /* CSR0 in Host mode */
118 #define MUSB_CSR0_H_DIS_PING		0x0800
119 #define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
120 #define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
121 #define MUSB_CSR0_H_NAKTIMEOUT		0x0080
122 #define MUSB_CSR0_H_STATUSPKT		0x0040
123 #define MUSB_CSR0_H_REQPKT		0x0020
124 #define MUSB_CSR0_H_ERROR		0x0010
125 #define MUSB_CSR0_H_SETUPPKT		0x0008
126 #define MUSB_CSR0_H_RXSTALL		0x0004
127 
128 /* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
129 #define MUSB_CSR0_P_WZC_BITS	\
130 	(MUSB_CSR0_P_SENTSTALL)
131 #define MUSB_CSR0_H_WZC_BITS	\
132 	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
133 	| MUSB_CSR0_RXPKTRDY)
134 
135 /* TxType/RxType */
136 #define MUSB_TYPE_SPEED		0xc0
137 #define MUSB_TYPE_SPEED_SHIFT	6
138 #define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
139 #define MUSB_TYPE_PROTO_SHIFT	4
140 #define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
141 
142 /* CONFIGDATA */
143 #define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
144 #define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
145 #define MUSB_CONFIGDATA_BIGENDIAN	0x20
146 #define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
147 #define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
148 #define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
149 #define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
150 #define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
151 
152 /* TXCSR in Peripheral and Host mode */
153 #define MUSB_TXCSR_AUTOSET		0x8000
154 #define MUSB_TXCSR_DMAENAB		0x1000
155 #define MUSB_TXCSR_FRCDATATOG		0x0800
156 #define MUSB_TXCSR_DMAMODE		0x0400
157 #define MUSB_TXCSR_CLRDATATOG		0x0040
158 #define MUSB_TXCSR_FLUSHFIFO		0x0008
159 #define MUSB_TXCSR_FIFONOTEMPTY		0x0002
160 #define MUSB_TXCSR_TXPKTRDY		0x0001
161 
162 /* TXCSR in Peripheral mode */
163 #define MUSB_TXCSR_P_ISO		0x4000
164 #define MUSB_TXCSR_P_INCOMPTX		0x0080
165 #define MUSB_TXCSR_P_SENTSTALL		0x0020
166 #define MUSB_TXCSR_P_SENDSTALL		0x0010
167 #define MUSB_TXCSR_P_UNDERRUN		0x0004
168 
169 /* TXCSR in Host mode */
170 #define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
171 #define MUSB_TXCSR_H_DATATOGGLE		0x0100
172 #define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
173 #define MUSB_TXCSR_H_RXSTALL		0x0020
174 #define MUSB_TXCSR_H_ERROR		0x0004
175 
176 /* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
177 #define MUSB_TXCSR_P_WZC_BITS	\
178 	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
179 	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
180 #define MUSB_TXCSR_H_WZC_BITS	\
181 	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
182 	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
183 
184 /* RXCSR in Peripheral and Host mode */
185 #define MUSB_RXCSR_AUTOCLEAR		0x8000
186 #define MUSB_RXCSR_DMAENAB		0x2000
187 #define MUSB_RXCSR_DISNYET		0x1000
188 #define MUSB_RXCSR_PID_ERR		0x1000
189 #define MUSB_RXCSR_DMAMODE		0x0800
190 #define MUSB_RXCSR_INCOMPRX		0x0100
191 #define MUSB_RXCSR_CLRDATATOG		0x0080
192 #define MUSB_RXCSR_FLUSHFIFO		0x0010
193 #define MUSB_RXCSR_DATAERROR		0x0008
194 #define MUSB_RXCSR_FIFOFULL		0x0002
195 #define MUSB_RXCSR_RXPKTRDY		0x0001
196 
197 /* RXCSR in Peripheral mode */
198 #define MUSB_RXCSR_P_ISO		0x4000
199 #define MUSB_RXCSR_P_SENTSTALL		0x0040
200 #define MUSB_RXCSR_P_SENDSTALL		0x0020
201 #define MUSB_RXCSR_P_OVERRUN		0x0004
202 
203 /* RXCSR in Host mode */
204 #define MUSB_RXCSR_H_AUTOREQ		0x4000
205 #define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
206 #define MUSB_RXCSR_H_DATATOGGLE		0x0200
207 #define MUSB_RXCSR_H_RXSTALL		0x0040
208 #define MUSB_RXCSR_H_REQPKT		0x0020
209 #define MUSB_RXCSR_H_ERROR		0x0004
210 
211 /* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
212 #define MUSB_RXCSR_P_WZC_BITS	\
213 	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
214 	| MUSB_RXCSR_RXPKTRDY)
215 #define MUSB_RXCSR_H_WZC_BITS	\
216 	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
217 	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
218 
219 /* HUBADDR */
220 #define MUSB_HUBADDR_MULTI_TT		0x80
221 
222 
223 #ifndef CONFIG_BLACKFIN
224 
225 /*
226  * Common USB registers
227  */
228 
229 #define MUSB_FADDR		0x00	/* 8-bit */
230 #define MUSB_POWER		0x01	/* 8-bit */
231 
232 #define MUSB_INTRTX		0x02	/* 16-bit */
233 #define MUSB_INTRRX		0x04
234 #define MUSB_INTRTXE		0x06
235 #define MUSB_INTRRXE		0x08
236 #define MUSB_INTRUSB		0x0A	/* 8 bit */
237 #define MUSB_INTRUSBE		0x0B	/* 8 bit */
238 #define MUSB_FRAME		0x0C
239 #define MUSB_INDEX		0x0E	/* 8 bit */
240 #define MUSB_TESTMODE		0x0F	/* 8 bit */
241 
242 /*
243  * Additional Control Registers
244  */
245 
246 #define MUSB_DEVCTL		0x60	/* 8 bit */
247 #define MUSB_BABBLE_CTL		0x61	/* 8 bit */
248 
249 /* These are always controlled through the INDEX register */
250 #define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
251 #define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
252 #define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
253 #define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
254 
255 /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
256 #define MUSB_HWVERS		0x6C	/* 8 bit */
257 #define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
258 #define MUSB_ULPI_INT_MASK	0x72	/* 8 bit */
259 #define MUSB_ULPI_INT_SRC	0x73	/* 8 bit */
260 #define MUSB_ULPI_REG_DATA	0x74	/* 8 bit */
261 #define MUSB_ULPI_REG_ADDR	0x75	/* 8 bit */
262 #define MUSB_ULPI_REG_CONTROL	0x76	/* 8 bit */
263 #define MUSB_ULPI_RAW_DATA	0x77	/* 8 bit */
264 
265 #define MUSB_EPINFO		0x78	/* 8 bit */
266 #define MUSB_RAMINFO		0x79	/* 8 bit */
267 #define MUSB_LINKINFO		0x7a	/* 8 bit */
268 #define MUSB_VPLEN		0x7b	/* 8 bit */
269 #define MUSB_HS_EOF1		0x7c	/* 8 bit */
270 #define MUSB_FS_EOF1		0x7d	/* 8 bit */
271 #define MUSB_LS_EOF1		0x7e	/* 8 bit */
272 
273 /* Offsets to endpoint registers */
274 #define MUSB_TXMAXP		0x00
275 #define MUSB_TXCSR		0x02
276 #define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
277 #define MUSB_RXMAXP		0x04
278 #define MUSB_RXCSR		0x06
279 #define MUSB_RXCOUNT		0x08
280 #define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
281 #define MUSB_TXTYPE		0x0A
282 #define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
283 #define MUSB_TXINTERVAL		0x0B
284 #define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
285 #define MUSB_RXTYPE		0x0C
286 #define MUSB_RXINTERVAL		0x0D
287 #define MUSB_FIFOSIZE		0x0F
288 #define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
289 
290 #include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
291 
292 #define MUSB_TXCSR_MODE			0x2000
293 
294 /* "bus control"/target registers, for host side multipoint (external hubs) */
295 #define MUSB_TXFUNCADDR		0x00
296 #define MUSB_TXHUBADDR		0x02
297 #define MUSB_TXHUBPORT		0x03
298 
299 #define MUSB_RXFUNCADDR		0x04
300 #define MUSB_RXHUBADDR		0x06
301 #define MUSB_RXHUBPORT		0x07
302 
303 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
304 {
305 	musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
306 }
307 
308 static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
309 {
310 	musb_writew(mbase, MUSB_TXFIFOADD, c_off);
311 }
312 
313 static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
314 {
315 	musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
316 }
317 
318 static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
319 {
320 	musb_writew(mbase, MUSB_RXFIFOADD, c_off);
321 }
322 
323 static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
324 {
325 	musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
326 }
327 
328 static inline u8 musb_read_txfifosz(void __iomem *mbase)
329 {
330 	return musb_readb(mbase, MUSB_TXFIFOSZ);
331 }
332 
333 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
334 {
335 	return musb_readw(mbase, MUSB_TXFIFOADD);
336 }
337 
338 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
339 {
340 	return musb_readb(mbase, MUSB_RXFIFOSZ);
341 }
342 
343 static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
344 {
345 	return musb_readw(mbase, MUSB_RXFIFOADD);
346 }
347 
348 static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
349 {
350 	return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
351 }
352 
353 static inline u8 musb_read_configdata(void __iomem *mbase)
354 {
355 	musb_writeb(mbase, MUSB_INDEX, 0);
356 	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
357 }
358 
359 static inline u16 musb_read_hwvers(void __iomem *mbase)
360 {
361 	return musb_readw(mbase, MUSB_HWVERS);
362 }
363 
364 static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum,
365 		u8 qh_addr_reg)
366 {
367 	musb_writeb(musb->mregs,
368 		    musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR),
369 		    qh_addr_reg);
370 }
371 
372 static inline void musb_write_rxhubaddr(struct musb *musb, u8 epnum,
373 		u8 qh_h_addr_reg)
374 {
375 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBADDR),
376 			qh_h_addr_reg);
377 }
378 
379 static inline void musb_write_rxhubport(struct musb *musb, u8 epnum,
380 		u8 qh_h_port_reg)
381 {
382 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBPORT),
383 			qh_h_port_reg);
384 }
385 
386 static inline void musb_write_txfunaddr(struct musb *musb, u8 epnum,
387 		u8 qh_addr_reg)
388 {
389 	musb_writeb(musb->mregs,
390 		    musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR),
391 		    qh_addr_reg);
392 }
393 
394 static inline void musb_write_txhubaddr(struct musb *musb, u8 epnum,
395 		u8 qh_addr_reg)
396 {
397 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBADDR),
398 			qh_addr_reg);
399 }
400 
401 static inline void musb_write_txhubport(struct musb *musb, u8 epnum,
402 		u8 qh_h_port_reg)
403 {
404 	musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBPORT),
405 			qh_h_port_reg);
406 }
407 
408 static inline u8 musb_read_rxfunaddr(struct musb *musb, u8 epnum)
409 {
410 	return musb_readb(musb->mregs,
411 			  musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR));
412 }
413 
414 static inline u8 musb_read_rxhubaddr(struct musb *musb, u8 epnum)
415 {
416 	return musb_readb(musb->mregs,
417 			  musb->io.busctl_offset(epnum, MUSB_RXHUBADDR));
418 }
419 
420 static inline u8 musb_read_rxhubport(struct musb *musb, u8 epnum)
421 {
422 	return musb_readb(musb->mregs,
423 			  musb->io.busctl_offset(epnum, MUSB_RXHUBPORT));
424 }
425 
426 static inline u8 musb_read_txfunaddr(struct musb *musb, u8 epnum)
427 {
428 	return musb_readb(musb->mregs,
429 			  musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR));
430 }
431 
432 static inline u8 musb_read_txhubaddr(struct musb *musb, u8 epnum)
433 {
434 	return musb_readb(musb->mregs,
435 			  musb->io.busctl_offset(epnum, MUSB_TXHUBADDR));
436 }
437 
438 static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
439 {
440 	return musb_readb(musb->mregs,
441 			  musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
442 }
443 
444 #else /* CONFIG_BLACKFIN */
445 
446 #define USB_BASE		USB_FADDR
447 #define USB_OFFSET(reg)		(reg - USB_BASE)
448 
449 /*
450  * Common USB registers
451  */
452 #define MUSB_FADDR		USB_OFFSET(USB_FADDR)	/* 8-bit */
453 #define MUSB_POWER		USB_OFFSET(USB_POWER)	/* 8-bit */
454 #define MUSB_INTRTX		USB_OFFSET(USB_INTRTX)	/* 16-bit */
455 #define MUSB_INTRRX		USB_OFFSET(USB_INTRRX)
456 #define MUSB_INTRTXE		USB_OFFSET(USB_INTRTXE)
457 #define MUSB_INTRRXE		USB_OFFSET(USB_INTRRXE)
458 #define MUSB_INTRUSB		USB_OFFSET(USB_INTRUSB)	/* 8 bit */
459 #define MUSB_INTRUSBE		USB_OFFSET(USB_INTRUSBE)/* 8 bit */
460 #define MUSB_FRAME		USB_OFFSET(USB_FRAME)
461 #define MUSB_INDEX		USB_OFFSET(USB_INDEX)	/* 8 bit */
462 #define MUSB_TESTMODE		USB_OFFSET(USB_TESTMODE)/* 8 bit */
463 
464 /*
465  * Additional Control Registers
466  */
467 
468 #define MUSB_DEVCTL		USB_OFFSET(USB_OTG_DEV_CTL)	/* 8 bit */
469 
470 #define MUSB_LINKINFO		USB_OFFSET(USB_LINKINFO)/* 8 bit */
471 #define MUSB_VPLEN		USB_OFFSET(USB_VPLEN)	/* 8 bit */
472 #define MUSB_HS_EOF1		USB_OFFSET(USB_HS_EOF1)	/* 8 bit */
473 #define MUSB_FS_EOF1		USB_OFFSET(USB_FS_EOF1)	/* 8 bit */
474 #define MUSB_LS_EOF1		USB_OFFSET(USB_LS_EOF1)	/* 8 bit */
475 
476 /* Offsets to endpoint registers */
477 #define MUSB_TXMAXP		0x00
478 #define MUSB_TXCSR		0x04
479 #define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
480 #define MUSB_RXMAXP		0x08
481 #define MUSB_RXCSR		0x0C
482 #define MUSB_RXCOUNT		0x10
483 #define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
484 #define MUSB_TXTYPE		0x14
485 #define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
486 #define MUSB_TXINTERVAL		0x18
487 #define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
488 #define MUSB_RXTYPE		0x1C
489 #define MUSB_RXINTERVAL		0x20
490 #define MUSB_TXCOUNT		0x28
491 
492 /* Offsets to endpoint registers in indexed model (using INDEX register) */
493 #define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
494 	(0x40 + (_offset))
495 
496 /* Offsets to endpoint registers in flat models */
497 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
498 	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
499 
500 /* Not implemented - HW has separate Tx/Rx FIFO */
501 #define MUSB_TXCSR_MODE			0x0000
502 
503 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
504 {
505 }
506 
507 static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
508 {
509 }
510 
511 static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
512 {
513 }
514 
515 static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
516 {
517 }
518 
519 static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
520 {
521 }
522 
523 static inline u8 musb_read_txfifosz(void __iomem *mbase)
524 {
525 	return 0;
526 }
527 
528 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
529 {
530 	return 0;
531 }
532 
533 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
534 {
535 	return 0;
536 }
537 
538 static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
539 {
540 	return 0;
541 }
542 
543 static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
544 {
545 	return 0;
546 }
547 
548 static inline u8 musb_read_configdata(void __iomem *mbase)
549 {
550 	return 0;
551 }
552 
553 static inline u16 musb_read_hwvers(void __iomem *mbase)
554 {
555 	/*
556 	 * This register is invisible on Blackfin, actually the MUSB
557 	 * RTL version of Blackfin is 1.9, so just hardcode its value.
558 	 */
559 	return MUSB_HWVERS_1900;
560 }
561 
562 static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
563 		u8 qh_addr_req)
564 {
565 }
566 
567 static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
568 		u8 qh_h_addr_reg)
569 {
570 }
571 
572 static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
573 		u8 qh_h_port_reg)
574 {
575 }
576 
577 static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
578 		u8 qh_addr_reg)
579 {
580 }
581 
582 static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
583 		u8 qh_addr_reg)
584 {
585 }
586 
587 static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
588 		u8 qh_h_port_reg)
589 {
590 }
591 
592 static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
593 {
594 	return 0;
595 }
596 
597 static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
598 {
599 	return 0;
600 }
601 
602 static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
603 {
604 	return 0;
605 }
606 
607 static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
608 {
609 	return 0;
610 }
611 
612 static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
613 {
614 	return 0;
615 }
616 
617 static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
618 {
619 	return 0;
620 }
621 
622 #endif /* CONFIG_BLACKFIN */
623 
624 #endif	/* __MUSB_REGS_H__ */
625