xref: /linux/drivers/usb/musb/musb_dma.h (revision bd628c1bed7902ec1f24ba0fe70758949146abbe)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * MUSB OTG driver DMA controller abstraction
4  *
5  * Copyright 2005 Mentor Graphics Corporation
6  * Copyright (C) 2005-2006 by Texas Instruments
7  * Copyright (C) 2006-2007 Nokia Corporation
8  */
9 
10 #ifndef __MUSB_DMA_H__
11 #define __MUSB_DMA_H__
12 
13 struct musb_hw_ep;
14 
15 /*
16  * DMA Controller Abstraction
17  *
18  * DMA Controllers are abstracted to allow use of a variety of different
19  * implementations of DMA, as allowed by the Inventra USB cores.  On the
20  * host side, usbcore sets up the DMA mappings and flushes caches; on the
21  * peripheral side, the gadget controller driver does.  Responsibilities
22  * of a DMA controller driver include:
23  *
24  *  - Handling the details of moving multiple USB packets
25  *    in cooperation with the Inventra USB core, including especially
26  *    the correct RX side treatment of short packets and buffer-full
27  *    states (both of which terminate transfers).
28  *
29  *  - Knowing the correlation between dma channels and the
30  *    Inventra core's local endpoint resources and data direction.
31  *
32  *  - Maintaining a list of allocated/available channels.
33  *
34  *  - Updating channel status on interrupts,
35  *    whether shared with the Inventra core or separate.
36  */
37 
38 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
39 
40 #ifdef CONFIG_MUSB_PIO_ONLY
41 #define	is_dma_capable()	(0)
42 #else
43 #define	is_dma_capable()	(1)
44 #endif
45 
46 #ifdef CONFIG_USB_UX500_DMA
47 #define musb_dma_ux500(musb)		(musb->ops->quirks & MUSB_DMA_UX500)
48 #else
49 #define musb_dma_ux500(musb)		0
50 #endif
51 
52 #ifdef CONFIG_USB_TI_CPPI41_DMA
53 #define musb_dma_cppi41(musb)		(musb->ops->quirks & MUSB_DMA_CPPI41)
54 #else
55 #define musb_dma_cppi41(musb)		0
56 #endif
57 
58 #ifdef CONFIG_USB_TI_CPPI_DMA
59 #define musb_dma_cppi(musb)		(musb->ops->quirks & MUSB_DMA_CPPI)
60 #else
61 #define musb_dma_cppi(musb)		0
62 #endif
63 
64 #ifdef CONFIG_USB_TUSB_OMAP_DMA
65 #define tusb_dma_omap(musb)		(musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
66 #else
67 #define tusb_dma_omap(musb)		0
68 #endif
69 
70 #ifdef CONFIG_USB_INVENTRA_DMA
71 #define musb_dma_inventra(musb)		(musb->ops->quirks & MUSB_DMA_INVENTRA)
72 #else
73 #define musb_dma_inventra(musb)		0
74 #endif
75 
76 #if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA)
77 #define	is_cppi_enabled(musb)		\
78 	(musb_dma_cppi(musb) || musb_dma_cppi41(musb))
79 #else
80 #define	is_cppi_enabled(musb)	0
81 #endif
82 
83 /*
84  * DMA channel status ... updated by the dma controller driver whenever that
85  * status changes, and protected by the overall controller spinlock.
86  */
87 enum dma_channel_status {
88 	/* unallocated */
89 	MUSB_DMA_STATUS_UNKNOWN,
90 	/* allocated ... but not busy, no errors */
91 	MUSB_DMA_STATUS_FREE,
92 	/* busy ... transactions are active */
93 	MUSB_DMA_STATUS_BUSY,
94 	/* transaction(s) aborted due to ... dma or memory bus error */
95 	MUSB_DMA_STATUS_BUS_ABORT,
96 	/* transaction(s) aborted due to ... core error or USB fault */
97 	MUSB_DMA_STATUS_CORE_ABORT
98 };
99 
100 struct dma_controller;
101 
102 /**
103  * struct dma_channel - A DMA channel.
104  * @private_data: channel-private data
105  * @max_len: the maximum number of bytes the channel can move in one
106  *	transaction (typically representing many USB maximum-sized packets)
107  * @actual_len: how many bytes have been transferred
108  * @status: current channel status (updated e.g. on interrupt)
109  * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
110  *
111  * channels are associated with an endpoint for the duration of at least
112  * one usb transfer.
113  */
114 struct dma_channel {
115 	void			*private_data;
116 	/* FIXME not void* private_data, but a dma_controller * */
117 	size_t			max_len;
118 	size_t			actual_len;
119 	enum dma_channel_status	status;
120 	bool			desired_mode;
121 	bool			rx_packet_done;
122 };
123 
124 /*
125  * dma_channel_status - return status of dma channel
126  * @c: the channel
127  *
128  * Returns the software's view of the channel status.  If that status is BUSY
129  * then it's possible that the hardware has completed (or aborted) a transfer,
130  * so the driver needs to update that status.
131  */
132 static inline enum dma_channel_status
133 dma_channel_status(struct dma_channel *c)
134 {
135 	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
136 }
137 
138 /**
139  * struct dma_controller - A DMA Controller.
140  * @musb: the usb controller
141  * @start: call this to start a DMA controller;
142  *	return 0 on success, else negative errno
143  * @stop: call this to stop a DMA controller
144  *	return 0 on success, else negative errno
145  * @channel_alloc: call this to allocate a DMA channel
146  * @channel_release: call this to release a DMA channel
147  * @channel_abort: call this to abort a pending DMA transaction,
148  *	returning it to FREE (but allocated) state
149  * @dma_callback: invoked on DMA completion, useful to run platform
150  *	code such IRQ acknowledgment.
151  *
152  * Controllers manage dma channels.
153  */
154 struct dma_controller {
155 	struct musb *musb;
156 	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
157 					struct musb_hw_ep *, u8 is_tx);
158 	void			(*channel_release)(struct dma_channel *);
159 	int			(*channel_program)(struct dma_channel *channel,
160 							u16 maxpacket, u8 mode,
161 							dma_addr_t dma_addr,
162 							u32 length);
163 	int			(*channel_abort)(struct dma_channel *);
164 	int			(*is_compatible)(struct dma_channel *channel,
165 							u16 maxpacket,
166 							void *buf, u32 length);
167 	void			(*dma_callback)(struct dma_controller *);
168 };
169 
170 /* called after channel_program(), may indicate a fault */
171 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
172 
173 #ifdef CONFIG_MUSB_PIO_ONLY
174 static inline struct dma_controller *
175 musb_dma_controller_create(struct musb *m, void __iomem *io)
176 {
177 	return NULL;
178 }
179 
180 static inline void musb_dma_controller_destroy(struct dma_controller *d) { }
181 
182 #else
183 
184 extern struct dma_controller *
185 (*musb_dma_controller_create)(struct musb *, void __iomem *);
186 
187 extern void (*musb_dma_controller_destroy)(struct dma_controller *);
188 #endif
189 
190 /* Platform specific DMA functions */
191 extern struct dma_controller *
192 musbhs_dma_controller_create(struct musb *musb, void __iomem *base);
193 extern void musbhs_dma_controller_destroy(struct dma_controller *c);
194 
195 extern struct dma_controller *
196 tusb_dma_controller_create(struct musb *musb, void __iomem *base);
197 extern void tusb_dma_controller_destroy(struct dma_controller *c);
198 
199 extern struct dma_controller *
200 cppi_dma_controller_create(struct musb *musb, void __iomem *base);
201 extern void cppi_dma_controller_destroy(struct dma_controller *c);
202 
203 extern struct dma_controller *
204 cppi41_dma_controller_create(struct musb *musb, void __iomem *base);
205 extern void cppi41_dma_controller_destroy(struct dma_controller *c);
206 
207 extern struct dma_controller *
208 ux500_dma_controller_create(struct musb *musb, void __iomem *base);
209 extern void ux500_dma_controller_destroy(struct dma_controller *c);
210 
211 #endif	/* __MUSB_DMA_H__ */
212