1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * MUSB OTG driver core code 4 * 5 * Copyright 2005 Mentor Graphics Corporation 6 * Copyright (C) 2005-2006 by Texas Instruments 7 * Copyright (C) 2006-2007 Nokia Corporation 8 */ 9 10 /* 11 * Inventra (Multipoint) Dual-Role Controller Driver for Linux. 12 * 13 * This consists of a Host Controller Driver (HCD) and a peripheral 14 * controller driver implementing the "Gadget" API; OTG support is 15 * in the works. These are normal Linux-USB controller drivers which 16 * use IRQs and have no dedicated thread. 17 * 18 * This version of the driver has only been used with products from 19 * Texas Instruments. Those products integrate the Inventra logic 20 * with other DMA, IRQ, and bus modules, as well as other logic that 21 * needs to be reflected in this driver. 22 * 23 * 24 * NOTE: the original Mentor code here was pretty much a collection 25 * of mechanisms that don't seem to have been fully integrated/working 26 * for *any* Linux kernel version. This version aims at Linux 2.6.now, 27 * Key open issues include: 28 * 29 * - Lack of host-side transaction scheduling, for all transfer types. 30 * The hardware doesn't do it; instead, software must. 31 * 32 * This is not an issue for OTG devices that don't support external 33 * hubs, but for more "normal" USB hosts it's a user issue that the 34 * "multipoint" support doesn't scale in the expected ways. That 35 * includes DaVinci EVM in a common non-OTG mode. 36 * 37 * * Control and bulk use dedicated endpoints, and there's as 38 * yet no mechanism to either (a) reclaim the hardware when 39 * peripherals are NAKing, which gets complicated with bulk 40 * endpoints, or (b) use more than a single bulk endpoint in 41 * each direction. 42 * 43 * RESULT: one device may be perceived as blocking another one. 44 * 45 * * Interrupt and isochronous will dynamically allocate endpoint 46 * hardware, but (a) there's no record keeping for bandwidth; 47 * (b) in the common case that few endpoints are available, there 48 * is no mechanism to reuse endpoints to talk to multiple devices. 49 * 50 * RESULT: At one extreme, bandwidth can be overcommitted in 51 * some hardware configurations, no faults will be reported. 52 * At the other extreme, the bandwidth capabilities which do 53 * exist tend to be severely undercommitted. You can't yet hook 54 * up both a keyboard and a mouse to an external USB hub. 55 */ 56 57 /* 58 * This gets many kinds of configuration information: 59 * - Kconfig for everything user-configurable 60 * - platform_device for addressing, irq, and platform_data 61 * - platform_data is mostly for board-specific information 62 * (plus recentrly, SOC or family details) 63 * 64 * Most of the conditional compilation will (someday) vanish. 65 */ 66 67 #include <linux/module.h> 68 #include <linux/kernel.h> 69 #include <linux/sched.h> 70 #include <linux/slab.h> 71 #include <linux/list.h> 72 #include <linux/kobject.h> 73 #include <linux/prefetch.h> 74 #include <linux/platform_device.h> 75 #include <linux/io.h> 76 #include <linux/iopoll.h> 77 #include <linux/dma-mapping.h> 78 #include <linux/usb.h> 79 #include <linux/usb/of.h> 80 81 #include "musb_core.h" 82 #include "musb_trace.h" 83 84 #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON) 85 86 87 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" 88 #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver" 89 90 #define MUSB_VERSION "6.0" 91 92 #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION 93 94 #define MUSB_DRIVER_NAME "musb-hdrc" 95 const char musb_driver_name[] = MUSB_DRIVER_NAME; 96 97 MODULE_DESCRIPTION(DRIVER_INFO); 98 MODULE_AUTHOR(DRIVER_AUTHOR); 99 MODULE_LICENSE("GPL"); 100 MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); 101 102 103 /*-------------------------------------------------------------------------*/ 104 105 static inline struct musb *dev_to_musb(struct device *dev) 106 { 107 return dev_get_drvdata(dev); 108 } 109 110 enum musb_mode musb_get_mode(struct device *dev) 111 { 112 enum usb_dr_mode mode; 113 114 mode = usb_get_dr_mode(dev); 115 switch (mode) { 116 case USB_DR_MODE_HOST: 117 return MUSB_HOST; 118 case USB_DR_MODE_PERIPHERAL: 119 return MUSB_PERIPHERAL; 120 case USB_DR_MODE_OTG: 121 case USB_DR_MODE_UNKNOWN: 122 default: 123 return MUSB_OTG; 124 } 125 } 126 EXPORT_SYMBOL_GPL(musb_get_mode); 127 128 /*-------------------------------------------------------------------------*/ 129 130 static int musb_ulpi_read(struct usb_phy *phy, u32 reg) 131 { 132 void __iomem *addr = phy->io_priv; 133 int i = 0; 134 u8 r; 135 u8 power; 136 int ret; 137 138 pm_runtime_get_sync(phy->io_dev); 139 140 /* Make sure the transceiver is not in low power mode */ 141 power = musb_readb(addr, MUSB_POWER); 142 power &= ~MUSB_POWER_SUSPENDM; 143 musb_writeb(addr, MUSB_POWER, power); 144 145 /* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the 146 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM. 147 */ 148 149 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); 150 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, 151 MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR); 152 153 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) 154 & MUSB_ULPI_REG_CMPLT)) { 155 i++; 156 if (i == 10000) { 157 ret = -ETIMEDOUT; 158 goto out; 159 } 160 161 } 162 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL); 163 r &= ~MUSB_ULPI_REG_CMPLT; 164 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r); 165 166 ret = musb_readb(addr, MUSB_ULPI_REG_DATA); 167 168 out: 169 pm_runtime_put(phy->io_dev); 170 171 return ret; 172 } 173 174 static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg) 175 { 176 void __iomem *addr = phy->io_priv; 177 int i = 0; 178 u8 r = 0; 179 u8 power; 180 int ret = 0; 181 182 pm_runtime_get_sync(phy->io_dev); 183 184 /* Make sure the transceiver is not in low power mode */ 185 power = musb_readb(addr, MUSB_POWER); 186 power &= ~MUSB_POWER_SUSPENDM; 187 musb_writeb(addr, MUSB_POWER, power); 188 189 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); 190 musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val); 191 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ); 192 193 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) 194 & MUSB_ULPI_REG_CMPLT)) { 195 i++; 196 if (i == 10000) { 197 ret = -ETIMEDOUT; 198 goto out; 199 } 200 } 201 202 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL); 203 r &= ~MUSB_ULPI_REG_CMPLT; 204 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r); 205 206 out: 207 pm_runtime_put(phy->io_dev); 208 209 return ret; 210 } 211 212 static struct usb_phy_io_ops musb_ulpi_access = { 213 .read = musb_ulpi_read, 214 .write = musb_ulpi_write, 215 }; 216 217 /*-------------------------------------------------------------------------*/ 218 219 static u32 musb_default_fifo_offset(u8 epnum) 220 { 221 return 0x20 + (epnum * 4); 222 } 223 224 /* "flat" mapping: each endpoint has its own i/o address */ 225 static void musb_flat_ep_select(void __iomem *mbase, u8 epnum) 226 { 227 } 228 229 static u32 musb_flat_ep_offset(u8 epnum, u16 offset) 230 { 231 return 0x100 + (0x10 * epnum) + offset; 232 } 233 234 /* "indexed" mapping: INDEX register controls register bank select */ 235 static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum) 236 { 237 musb_writeb(mbase, MUSB_INDEX, epnum); 238 } 239 240 static u32 musb_indexed_ep_offset(u8 epnum, u16 offset) 241 { 242 return 0x10 + offset; 243 } 244 245 static u32 musb_default_busctl_offset(u8 epnum, u16 offset) 246 { 247 return 0x80 + (0x08 * epnum) + offset; 248 } 249 250 static u8 musb_default_readb(void __iomem *addr, u32 offset) 251 { 252 u8 data = __raw_readb(addr + offset); 253 254 trace_musb_readb(__builtin_return_address(0), addr, offset, data); 255 return data; 256 } 257 258 static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data) 259 { 260 trace_musb_writeb(__builtin_return_address(0), addr, offset, data); 261 __raw_writeb(data, addr + offset); 262 } 263 264 static u16 musb_default_readw(void __iomem *addr, u32 offset) 265 { 266 u16 data = __raw_readw(addr + offset); 267 268 trace_musb_readw(__builtin_return_address(0), addr, offset, data); 269 return data; 270 } 271 272 static void musb_default_writew(void __iomem *addr, u32 offset, u16 data) 273 { 274 trace_musb_writew(__builtin_return_address(0), addr, offset, data); 275 __raw_writew(data, addr + offset); 276 } 277 278 static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out) 279 { 280 void __iomem *epio = qh->hw_ep->regs; 281 u16 csr; 282 283 if (is_out) 284 csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; 285 else 286 csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; 287 288 return csr; 289 } 290 291 static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out, 292 struct urb *urb) 293 { 294 u16 csr; 295 u16 toggle; 296 297 toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); 298 299 if (is_out) 300 csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE 301 | MUSB_TXCSR_H_DATATOGGLE) 302 : MUSB_TXCSR_CLRDATATOG; 303 else 304 csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE 305 | MUSB_RXCSR_H_DATATOGGLE) : 0; 306 307 return csr; 308 } 309 310 /* 311 * Load an endpoint's FIFO 312 */ 313 static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len, 314 const u8 *src) 315 { 316 struct musb *musb = hw_ep->musb; 317 void __iomem *fifo = hw_ep->fifo; 318 319 if (unlikely(len == 0)) 320 return; 321 322 prefetch((u8 *)src); 323 324 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", 325 'T', hw_ep->epnum, fifo, len, src); 326 327 /* we can't assume unaligned reads work */ 328 if (likely((0x01 & (unsigned long) src) == 0)) { 329 u16 index = 0; 330 331 /* best case is 32bit-aligned source address */ 332 if ((0x02 & (unsigned long) src) == 0) { 333 if (len >= 4) { 334 iowrite32_rep(fifo, src + index, len >> 2); 335 index += len & ~0x03; 336 } 337 if (len & 0x02) { 338 __raw_writew(*(u16 *)&src[index], fifo); 339 index += 2; 340 } 341 } else { 342 if (len >= 2) { 343 iowrite16_rep(fifo, src + index, len >> 1); 344 index += len & ~0x01; 345 } 346 } 347 if (len & 0x01) 348 __raw_writeb(src[index], fifo); 349 } else { 350 /* byte aligned */ 351 iowrite8_rep(fifo, src, len); 352 } 353 } 354 355 /* 356 * Unload an endpoint's FIFO 357 */ 358 static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) 359 { 360 struct musb *musb = hw_ep->musb; 361 void __iomem *fifo = hw_ep->fifo; 362 363 if (unlikely(len == 0)) 364 return; 365 366 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n", 367 'R', hw_ep->epnum, fifo, len, dst); 368 369 /* we can't assume unaligned writes work */ 370 if (likely((0x01 & (unsigned long) dst) == 0)) { 371 u16 index = 0; 372 373 /* best case is 32bit-aligned destination address */ 374 if ((0x02 & (unsigned long) dst) == 0) { 375 if (len >= 4) { 376 ioread32_rep(fifo, dst, len >> 2); 377 index = len & ~0x03; 378 } 379 if (len & 0x02) { 380 *(u16 *)&dst[index] = __raw_readw(fifo); 381 index += 2; 382 } 383 } else { 384 if (len >= 2) { 385 ioread16_rep(fifo, dst, len >> 1); 386 index = len & ~0x01; 387 } 388 } 389 if (len & 0x01) 390 dst[index] = __raw_readb(fifo); 391 } else { 392 /* byte aligned */ 393 ioread8_rep(fifo, dst, len); 394 } 395 } 396 397 /* 398 * Old style IO functions 399 */ 400 u8 (*musb_readb)(void __iomem *addr, u32 offset); 401 EXPORT_SYMBOL_GPL(musb_readb); 402 403 void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data); 404 EXPORT_SYMBOL_GPL(musb_writeb); 405 406 u8 (*musb_clearb)(void __iomem *addr, u32 offset); 407 EXPORT_SYMBOL_GPL(musb_clearb); 408 409 u16 (*musb_readw)(void __iomem *addr, u32 offset); 410 EXPORT_SYMBOL_GPL(musb_readw); 411 412 void (*musb_writew)(void __iomem *addr, u32 offset, u16 data); 413 EXPORT_SYMBOL_GPL(musb_writew); 414 415 u16 (*musb_clearw)(void __iomem *addr, u32 offset); 416 EXPORT_SYMBOL_GPL(musb_clearw); 417 418 u32 musb_readl(void __iomem *addr, u32 offset) 419 { 420 u32 data = __raw_readl(addr + offset); 421 422 trace_musb_readl(__builtin_return_address(0), addr, offset, data); 423 return data; 424 } 425 EXPORT_SYMBOL_GPL(musb_readl); 426 427 void musb_writel(void __iomem *addr, u32 offset, u32 data) 428 { 429 trace_musb_writel(__builtin_return_address(0), addr, offset, data); 430 __raw_writel(data, addr + offset); 431 } 432 EXPORT_SYMBOL_GPL(musb_writel); 433 434 #ifndef CONFIG_MUSB_PIO_ONLY 435 struct dma_controller * 436 (*musb_dma_controller_create)(struct musb *musb, void __iomem *base); 437 EXPORT_SYMBOL(musb_dma_controller_create); 438 439 void (*musb_dma_controller_destroy)(struct dma_controller *c); 440 EXPORT_SYMBOL(musb_dma_controller_destroy); 441 #endif 442 443 /* 444 * New style IO functions 445 */ 446 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) 447 { 448 return hw_ep->musb->io.read_fifo(hw_ep, len, dst); 449 } 450 451 void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) 452 { 453 return hw_ep->musb->io.write_fifo(hw_ep, len, src); 454 } 455 456 static u8 musb_read_devctl(struct musb *musb) 457 { 458 return musb_readb(musb->mregs, MUSB_DEVCTL); 459 } 460 461 /** 462 * musb_set_host - set and initialize host mode 463 * @musb: musb controller driver data 464 * 465 * At least some musb revisions need to enable devctl session bit in 466 * peripheral mode to switch to host mode. Initializes things to host 467 * mode and sets A_IDLE. SoC glue needs to advance state further 468 * based on phy provided VBUS state. 469 * 470 * Note that the SoC glue code may need to wait for musb to settle 471 * on enable before calling this to avoid babble. 472 */ 473 int musb_set_host(struct musb *musb) 474 { 475 int error = 0; 476 u8 devctl; 477 478 if (!musb) 479 return -EINVAL; 480 481 devctl = musb_read_devctl(musb); 482 if (!(devctl & MUSB_DEVCTL_BDEVICE)) { 483 dev_info(musb->controller, 484 "%s: already in host mode: %02x\n", 485 __func__, devctl); 486 goto init_data; 487 } 488 489 devctl |= MUSB_DEVCTL_SESSION; 490 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 491 492 error = readx_poll_timeout(musb_read_devctl, musb, devctl, 493 !(devctl & MUSB_DEVCTL_BDEVICE), 5000, 494 1000000); 495 if (error) { 496 dev_err(musb->controller, "%s: could not set host: %02x\n", 497 __func__, devctl); 498 499 return error; 500 } 501 502 init_data: 503 musb->is_active = 1; 504 musb->xceiv->otg->state = OTG_STATE_A_IDLE; 505 MUSB_HST_MODE(musb); 506 507 return error; 508 } 509 EXPORT_SYMBOL_GPL(musb_set_host); 510 511 /** 512 * musb_set_peripheral - set and initialize peripheral mode 513 * @musb: musb controller driver data 514 * 515 * Clears devctl session bit and initializes things for peripheral 516 * mode and sets B_IDLE. SoC glue needs to advance state further 517 * based on phy provided VBUS state. 518 */ 519 int musb_set_peripheral(struct musb *musb) 520 { 521 int error = 0; 522 u8 devctl; 523 524 if (!musb) 525 return -EINVAL; 526 527 devctl = musb_read_devctl(musb); 528 if (devctl & MUSB_DEVCTL_BDEVICE) { 529 dev_info(musb->controller, 530 "%s: already in peripheral mode: %02x\n", 531 __func__, devctl); 532 533 goto init_data; 534 } 535 536 devctl &= ~MUSB_DEVCTL_SESSION; 537 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 538 539 error = readx_poll_timeout(musb_read_devctl, musb, devctl, 540 devctl & MUSB_DEVCTL_BDEVICE, 5000, 541 1000000); 542 if (error) { 543 dev_err(musb->controller, "%s: could not set peripheral: %02x\n", 544 __func__, devctl); 545 546 return error; 547 } 548 549 init_data: 550 musb->is_active = 0; 551 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 552 MUSB_DEV_MODE(musb); 553 554 return error; 555 } 556 EXPORT_SYMBOL_GPL(musb_set_peripheral); 557 558 /*-------------------------------------------------------------------------*/ 559 560 /* for high speed test mode; see USB 2.0 spec 7.1.20 */ 561 static const u8 musb_test_packet[53] = { 562 /* implicit SYNC then DATA0 to start */ 563 564 /* JKJKJKJK x9 */ 565 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 566 /* JJKKJJKK x8 */ 567 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 568 /* JJJJKKKK x8 */ 569 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 570 /* JJJJJJJKKKKKKK x8 */ 571 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 572 /* JJJJJJJK x8 */ 573 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 574 /* JKKKKKKK x10, JK */ 575 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e 576 577 /* implicit CRC16 then EOP to end */ 578 }; 579 580 void musb_load_testpacket(struct musb *musb) 581 { 582 void __iomem *regs = musb->endpoints[0].regs; 583 584 musb_ep_select(musb->mregs, 0); 585 musb_write_fifo(musb->control_ep, 586 sizeof(musb_test_packet), musb_test_packet); 587 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY); 588 } 589 590 /*-------------------------------------------------------------------------*/ 591 592 /* 593 * Handles OTG hnp timeouts, such as b_ase0_brst 594 */ 595 static void musb_otg_timer_func(struct timer_list *t) 596 { 597 struct musb *musb = from_timer(musb, t, otg_timer); 598 unsigned long flags; 599 600 spin_lock_irqsave(&musb->lock, flags); 601 switch (musb->xceiv->otg->state) { 602 case OTG_STATE_B_WAIT_ACON: 603 musb_dbg(musb, 604 "HNP: b_wait_acon timeout; back to b_peripheral"); 605 musb_g_disconnect(musb); 606 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 607 musb->is_active = 0; 608 break; 609 case OTG_STATE_A_SUSPEND: 610 case OTG_STATE_A_WAIT_BCON: 611 musb_dbg(musb, "HNP: %s timeout", 612 usb_otg_state_string(musb->xceiv->otg->state)); 613 musb_platform_set_vbus(musb, 0); 614 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; 615 break; 616 default: 617 musb_dbg(musb, "HNP: Unhandled mode %s", 618 usb_otg_state_string(musb->xceiv->otg->state)); 619 } 620 spin_unlock_irqrestore(&musb->lock, flags); 621 } 622 623 /* 624 * Stops the HNP transition. Caller must take care of locking. 625 */ 626 void musb_hnp_stop(struct musb *musb) 627 { 628 struct usb_hcd *hcd = musb->hcd; 629 void __iomem *mbase = musb->mregs; 630 u8 reg; 631 632 musb_dbg(musb, "HNP: stop from %s", 633 usb_otg_state_string(musb->xceiv->otg->state)); 634 635 switch (musb->xceiv->otg->state) { 636 case OTG_STATE_A_PERIPHERAL: 637 musb_g_disconnect(musb); 638 musb_dbg(musb, "HNP: back to %s", 639 usb_otg_state_string(musb->xceiv->otg->state)); 640 break; 641 case OTG_STATE_B_HOST: 642 musb_dbg(musb, "HNP: Disabling HR"); 643 if (hcd) 644 hcd->self.is_b_host = 0; 645 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 646 MUSB_DEV_MODE(musb); 647 reg = musb_readb(mbase, MUSB_POWER); 648 reg |= MUSB_POWER_SUSPENDM; 649 musb_writeb(mbase, MUSB_POWER, reg); 650 /* REVISIT: Start SESSION_REQUEST here? */ 651 break; 652 default: 653 musb_dbg(musb, "HNP: Stopping in unknown state %s", 654 usb_otg_state_string(musb->xceiv->otg->state)); 655 } 656 657 /* 658 * When returning to A state after HNP, avoid hub_port_rebounce(), 659 * which cause occasional OPT A "Did not receive reset after connect" 660 * errors. 661 */ 662 musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16); 663 } 664 665 static void musb_recover_from_babble(struct musb *musb); 666 667 static void musb_handle_intr_resume(struct musb *musb, u8 devctl) 668 { 669 musb_dbg(musb, "RESUME (%s)", 670 usb_otg_state_string(musb->xceiv->otg->state)); 671 672 if (devctl & MUSB_DEVCTL_HM) { 673 switch (musb->xceiv->otg->state) { 674 case OTG_STATE_A_SUSPEND: 675 /* remote wakeup? */ 676 musb->port1_status |= 677 (USB_PORT_STAT_C_SUSPEND << 16) 678 | MUSB_PORT_STAT_RESUME; 679 musb->rh_timer = jiffies 680 + msecs_to_jiffies(USB_RESUME_TIMEOUT); 681 musb->xceiv->otg->state = OTG_STATE_A_HOST; 682 musb->is_active = 1; 683 musb_host_resume_root_hub(musb); 684 schedule_delayed_work(&musb->finish_resume_work, 685 msecs_to_jiffies(USB_RESUME_TIMEOUT)); 686 break; 687 case OTG_STATE_B_WAIT_ACON: 688 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 689 musb->is_active = 1; 690 MUSB_DEV_MODE(musb); 691 break; 692 default: 693 WARNING("bogus %s RESUME (%s)\n", 694 "host", 695 usb_otg_state_string(musb->xceiv->otg->state)); 696 } 697 } else { 698 switch (musb->xceiv->otg->state) { 699 case OTG_STATE_A_SUSPEND: 700 /* possibly DISCONNECT is upcoming */ 701 musb->xceiv->otg->state = OTG_STATE_A_HOST; 702 musb_host_resume_root_hub(musb); 703 break; 704 case OTG_STATE_B_WAIT_ACON: 705 case OTG_STATE_B_PERIPHERAL: 706 /* disconnect while suspended? we may 707 * not get a disconnect irq... 708 */ 709 if ((devctl & MUSB_DEVCTL_VBUS) 710 != (3 << MUSB_DEVCTL_VBUS_SHIFT) 711 ) { 712 musb->int_usb |= MUSB_INTR_DISCONNECT; 713 musb->int_usb &= ~MUSB_INTR_SUSPEND; 714 break; 715 } 716 musb_g_resume(musb); 717 break; 718 case OTG_STATE_B_IDLE: 719 musb->int_usb &= ~MUSB_INTR_SUSPEND; 720 break; 721 default: 722 WARNING("bogus %s RESUME (%s)\n", 723 "peripheral", 724 usb_otg_state_string(musb->xceiv->otg->state)); 725 } 726 } 727 } 728 729 /* return IRQ_HANDLED to tell the caller to return immediately */ 730 static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl) 731 { 732 void __iomem *mbase = musb->mregs; 733 734 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS 735 && (devctl & MUSB_DEVCTL_BDEVICE)) { 736 musb_dbg(musb, "SessReq while on B state"); 737 return IRQ_HANDLED; 738 } 739 740 musb_dbg(musb, "SESSION_REQUEST (%s)", 741 usb_otg_state_string(musb->xceiv->otg->state)); 742 743 /* IRQ arrives from ID pin sense or (later, if VBUS power 744 * is removed) SRP. responses are time critical: 745 * - turn on VBUS (with silicon-specific mechanism) 746 * - go through A_WAIT_VRISE 747 * - ... to A_WAIT_BCON. 748 * a_wait_vrise_tmout triggers VBUS_ERROR transitions 749 */ 750 musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); 751 musb->ep0_stage = MUSB_EP0_START; 752 musb->xceiv->otg->state = OTG_STATE_A_IDLE; 753 MUSB_HST_MODE(musb); 754 musb_platform_set_vbus(musb, 1); 755 756 return IRQ_NONE; 757 } 758 759 static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl) 760 { 761 int ignore = 0; 762 763 /* During connection as an A-Device, we may see a short 764 * current spikes causing voltage drop, because of cable 765 * and peripheral capacitance combined with vbus draw. 766 * (So: less common with truly self-powered devices, where 767 * vbus doesn't act like a power supply.) 768 * 769 * Such spikes are short; usually less than ~500 usec, max 770 * of ~2 msec. That is, they're not sustained overcurrent 771 * errors, though they're reported using VBUSERROR irqs. 772 * 773 * Workarounds: (a) hardware: use self powered devices. 774 * (b) software: ignore non-repeated VBUS errors. 775 * 776 * REVISIT: do delays from lots of DEBUG_KERNEL checks 777 * make trouble here, keeping VBUS < 4.4V ? 778 */ 779 switch (musb->xceiv->otg->state) { 780 case OTG_STATE_A_HOST: 781 /* recovery is dicey once we've gotten past the 782 * initial stages of enumeration, but if VBUS 783 * stayed ok at the other end of the link, and 784 * another reset is due (at least for high speed, 785 * to redo the chirp etc), it might work OK... 786 */ 787 case OTG_STATE_A_WAIT_BCON: 788 case OTG_STATE_A_WAIT_VRISE: 789 if (musb->vbuserr_retry) { 790 void __iomem *mbase = musb->mregs; 791 792 musb->vbuserr_retry--; 793 ignore = 1; 794 devctl |= MUSB_DEVCTL_SESSION; 795 musb_writeb(mbase, MUSB_DEVCTL, devctl); 796 } else { 797 musb->port1_status |= 798 USB_PORT_STAT_OVERCURRENT 799 | (USB_PORT_STAT_C_OVERCURRENT << 16); 800 } 801 break; 802 default: 803 break; 804 } 805 806 dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, 807 "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", 808 usb_otg_state_string(musb->xceiv->otg->state), 809 devctl, 810 ({ char *s; 811 switch (devctl & MUSB_DEVCTL_VBUS) { 812 case 0 << MUSB_DEVCTL_VBUS_SHIFT: 813 s = "<SessEnd"; break; 814 case 1 << MUSB_DEVCTL_VBUS_SHIFT: 815 s = "<AValid"; break; 816 case 2 << MUSB_DEVCTL_VBUS_SHIFT: 817 s = "<VBusValid"; break; 818 /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ 819 default: 820 s = "VALID"; break; 821 } s; }), 822 VBUSERR_RETRY_COUNT - musb->vbuserr_retry, 823 musb->port1_status); 824 825 /* go through A_WAIT_VFALL then start a new session */ 826 if (!ignore) 827 musb_platform_set_vbus(musb, 0); 828 } 829 830 static void musb_handle_intr_suspend(struct musb *musb, u8 devctl) 831 { 832 musb_dbg(musb, "SUSPEND (%s) devctl %02x", 833 usb_otg_state_string(musb->xceiv->otg->state), devctl); 834 835 switch (musb->xceiv->otg->state) { 836 case OTG_STATE_A_PERIPHERAL: 837 /* We also come here if the cable is removed, since 838 * this silicon doesn't report ID-no-longer-grounded. 839 * 840 * We depend on T(a_wait_bcon) to shut us down, and 841 * hope users don't do anything dicey during this 842 * undesired detour through A_WAIT_BCON. 843 */ 844 musb_hnp_stop(musb); 845 musb_host_resume_root_hub(musb); 846 musb_root_disconnect(musb); 847 musb_platform_try_idle(musb, jiffies 848 + msecs_to_jiffies(musb->a_wait_bcon 849 ? : OTG_TIME_A_WAIT_BCON)); 850 851 break; 852 case OTG_STATE_B_IDLE: 853 if (!musb->is_active) 854 break; 855 fallthrough; 856 case OTG_STATE_B_PERIPHERAL: 857 musb_g_suspend(musb); 858 musb->is_active = musb->g.b_hnp_enable; 859 if (musb->is_active) { 860 musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; 861 musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); 862 mod_timer(&musb->otg_timer, jiffies 863 + msecs_to_jiffies( 864 OTG_TIME_B_ASE0_BRST)); 865 } 866 break; 867 case OTG_STATE_A_WAIT_BCON: 868 if (musb->a_wait_bcon != 0) 869 musb_platform_try_idle(musb, jiffies 870 + msecs_to_jiffies(musb->a_wait_bcon)); 871 break; 872 case OTG_STATE_A_HOST: 873 musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; 874 musb->is_active = musb->hcd->self.b_hnp_enable; 875 break; 876 case OTG_STATE_B_HOST: 877 /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ 878 musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); 879 break; 880 default: 881 /* "should not happen" */ 882 musb->is_active = 0; 883 break; 884 } 885 } 886 887 static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb) 888 { 889 struct usb_hcd *hcd = musb->hcd; 890 891 musb->is_active = 1; 892 musb->ep0_stage = MUSB_EP0_START; 893 894 musb->intrtxe = musb->epmask; 895 musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); 896 musb->intrrxe = musb->epmask & 0xfffe; 897 musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); 898 musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); 899 musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED 900 |USB_PORT_STAT_HIGH_SPEED 901 |USB_PORT_STAT_ENABLE 902 ); 903 musb->port1_status |= USB_PORT_STAT_CONNECTION 904 |(USB_PORT_STAT_C_CONNECTION << 16); 905 906 /* high vs full speed is just a guess until after reset */ 907 if (devctl & MUSB_DEVCTL_LSDEV) 908 musb->port1_status |= USB_PORT_STAT_LOW_SPEED; 909 910 /* indicate new connection to OTG machine */ 911 switch (musb->xceiv->otg->state) { 912 case OTG_STATE_B_PERIPHERAL: 913 if (int_usb & MUSB_INTR_SUSPEND) { 914 musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); 915 int_usb &= ~MUSB_INTR_SUSPEND; 916 goto b_host; 917 } else 918 musb_dbg(musb, "CONNECT as b_peripheral???"); 919 break; 920 case OTG_STATE_B_WAIT_ACON: 921 musb_dbg(musb, "HNP: CONNECT, now b_host"); 922 b_host: 923 musb->xceiv->otg->state = OTG_STATE_B_HOST; 924 if (musb->hcd) 925 musb->hcd->self.is_b_host = 1; 926 del_timer(&musb->otg_timer); 927 break; 928 default: 929 if ((devctl & MUSB_DEVCTL_VBUS) 930 == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { 931 musb->xceiv->otg->state = OTG_STATE_A_HOST; 932 if (hcd) 933 hcd->self.is_b_host = 0; 934 } 935 break; 936 } 937 938 musb_host_poke_root_hub(musb); 939 940 musb_dbg(musb, "CONNECT (%s) devctl %02x", 941 usb_otg_state_string(musb->xceiv->otg->state), devctl); 942 } 943 944 static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl) 945 { 946 musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", 947 usb_otg_state_string(musb->xceiv->otg->state), 948 MUSB_MODE(musb), devctl); 949 950 switch (musb->xceiv->otg->state) { 951 case OTG_STATE_A_HOST: 952 case OTG_STATE_A_SUSPEND: 953 musb_host_resume_root_hub(musb); 954 musb_root_disconnect(musb); 955 if (musb->a_wait_bcon != 0) 956 musb_platform_try_idle(musb, jiffies 957 + msecs_to_jiffies(musb->a_wait_bcon)); 958 break; 959 case OTG_STATE_B_HOST: 960 /* REVISIT this behaves for "real disconnect" 961 * cases; make sure the other transitions from 962 * from B_HOST act right too. The B_HOST code 963 * in hnp_stop() is currently not used... 964 */ 965 musb_root_disconnect(musb); 966 if (musb->hcd) 967 musb->hcd->self.is_b_host = 0; 968 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 969 MUSB_DEV_MODE(musb); 970 musb_g_disconnect(musb); 971 break; 972 case OTG_STATE_A_PERIPHERAL: 973 musb_hnp_stop(musb); 974 musb_root_disconnect(musb); 975 fallthrough; 976 case OTG_STATE_B_WAIT_ACON: 977 case OTG_STATE_B_PERIPHERAL: 978 case OTG_STATE_B_IDLE: 979 musb_g_disconnect(musb); 980 break; 981 default: 982 WARNING("unhandled DISCONNECT transition (%s)\n", 983 usb_otg_state_string(musb->xceiv->otg->state)); 984 break; 985 } 986 } 987 988 /* 989 * mentor saves a bit: bus reset and babble share the same irq. 990 * only host sees babble; only peripheral sees bus reset. 991 */ 992 static void musb_handle_intr_reset(struct musb *musb) 993 { 994 if (is_host_active(musb)) { 995 /* 996 * When BABBLE happens what we can depends on which 997 * platform MUSB is running, because some platforms 998 * implemented proprietary means for 'recovering' from 999 * Babble conditions. One such platform is AM335x. In 1000 * most cases, however, the only thing we can do is 1001 * drop the session. 1002 */ 1003 dev_err(musb->controller, "Babble\n"); 1004 musb_recover_from_babble(musb); 1005 } else { 1006 musb_dbg(musb, "BUS RESET as %s", 1007 usb_otg_state_string(musb->xceiv->otg->state)); 1008 switch (musb->xceiv->otg->state) { 1009 case OTG_STATE_A_SUSPEND: 1010 musb_g_reset(musb); 1011 fallthrough; 1012 case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ 1013 /* never use invalid T(a_wait_bcon) */ 1014 musb_dbg(musb, "HNP: in %s, %d msec timeout", 1015 usb_otg_state_string(musb->xceiv->otg->state), 1016 TA_WAIT_BCON(musb)); 1017 mod_timer(&musb->otg_timer, jiffies 1018 + msecs_to_jiffies(TA_WAIT_BCON(musb))); 1019 break; 1020 case OTG_STATE_A_PERIPHERAL: 1021 del_timer(&musb->otg_timer); 1022 musb_g_reset(musb); 1023 break; 1024 case OTG_STATE_B_WAIT_ACON: 1025 musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", 1026 usb_otg_state_string(musb->xceiv->otg->state)); 1027 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 1028 musb_g_reset(musb); 1029 break; 1030 case OTG_STATE_B_IDLE: 1031 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 1032 fallthrough; 1033 case OTG_STATE_B_PERIPHERAL: 1034 musb_g_reset(musb); 1035 break; 1036 default: 1037 musb_dbg(musb, "Unhandled BUS RESET as %s", 1038 usb_otg_state_string(musb->xceiv->otg->state)); 1039 } 1040 } 1041 } 1042 1043 /* 1044 * Interrupt Service Routine to record USB "global" interrupts. 1045 * Since these do not happen often and signify things of 1046 * paramount importance, it seems OK to check them individually; 1047 * the order of the tests is specified in the manual 1048 * 1049 * @param musb instance pointer 1050 * @param int_usb register contents 1051 * @param devctl 1052 */ 1053 1054 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, 1055 u8 devctl) 1056 { 1057 irqreturn_t handled = IRQ_NONE; 1058 1059 musb_dbg(musb, "<== DevCtl=%02x, int_usb=0x%x", devctl, int_usb); 1060 1061 /* in host mode, the peripheral may issue remote wakeup. 1062 * in peripheral mode, the host may resume the link. 1063 * spurious RESUME irqs happen too, paired with SUSPEND. 1064 */ 1065 if (int_usb & MUSB_INTR_RESUME) { 1066 musb_handle_intr_resume(musb, devctl); 1067 handled = IRQ_HANDLED; 1068 } 1069 1070 /* see manual for the order of the tests */ 1071 if (int_usb & MUSB_INTR_SESSREQ) { 1072 if (musb_handle_intr_sessreq(musb, devctl)) 1073 return IRQ_HANDLED; 1074 handled = IRQ_HANDLED; 1075 } 1076 1077 if (int_usb & MUSB_INTR_VBUSERROR) { 1078 musb_handle_intr_vbuserr(musb, devctl); 1079 handled = IRQ_HANDLED; 1080 } 1081 1082 if (int_usb & MUSB_INTR_SUSPEND) { 1083 musb_handle_intr_suspend(musb, devctl); 1084 handled = IRQ_HANDLED; 1085 } 1086 1087 if (int_usb & MUSB_INTR_CONNECT) { 1088 musb_handle_intr_connect(musb, devctl, int_usb); 1089 handled = IRQ_HANDLED; 1090 } 1091 1092 if (int_usb & MUSB_INTR_DISCONNECT) { 1093 musb_handle_intr_disconnect(musb, devctl); 1094 handled = IRQ_HANDLED; 1095 } 1096 1097 if (int_usb & MUSB_INTR_RESET) { 1098 musb_handle_intr_reset(musb); 1099 handled = IRQ_HANDLED; 1100 } 1101 1102 #if 0 1103 /* REVISIT ... this would be for multiplexing periodic endpoints, or 1104 * supporting transfer phasing to prevent exceeding ISO bandwidth 1105 * limits of a given frame or microframe. 1106 * 1107 * It's not needed for peripheral side, which dedicates endpoints; 1108 * though it _might_ use SOF irqs for other purposes. 1109 * 1110 * And it's not currently needed for host side, which also dedicates 1111 * endpoints, relies on TX/RX interval registers, and isn't claimed 1112 * to support ISO transfers yet. 1113 */ 1114 if (int_usb & MUSB_INTR_SOF) { 1115 void __iomem *mbase = musb->mregs; 1116 struct musb_hw_ep *ep; 1117 u8 epnum; 1118 u16 frame; 1119 1120 dev_dbg(musb->controller, "START_OF_FRAME\n"); 1121 handled = IRQ_HANDLED; 1122 1123 /* start any periodic Tx transfers waiting for current frame */ 1124 frame = musb_readw(mbase, MUSB_FRAME); 1125 ep = musb->endpoints; 1126 for (epnum = 1; (epnum < musb->nr_endpoints) 1127 && (musb->epmask >= (1 << epnum)); 1128 epnum++, ep++) { 1129 /* 1130 * FIXME handle framecounter wraps (12 bits) 1131 * eliminate duplicated StartUrb logic 1132 */ 1133 if (ep->dwWaitFrame >= frame) { 1134 ep->dwWaitFrame = 0; 1135 pr_debug("SOF --> periodic TX%s on %d\n", 1136 ep->tx_channel ? " DMA" : "", 1137 epnum); 1138 if (!ep->tx_channel) 1139 musb_h_tx_start(musb, epnum); 1140 else 1141 cppi_hostdma_start(musb, epnum); 1142 } 1143 } /* end of for loop */ 1144 } 1145 #endif 1146 1147 schedule_delayed_work(&musb->irq_work, 0); 1148 1149 return handled; 1150 } 1151 1152 /*-------------------------------------------------------------------------*/ 1153 1154 static void musb_disable_interrupts(struct musb *musb) 1155 { 1156 void __iomem *mbase = musb->mregs; 1157 1158 /* disable interrupts */ 1159 musb_writeb(mbase, MUSB_INTRUSBE, 0); 1160 musb->intrtxe = 0; 1161 musb_writew(mbase, MUSB_INTRTXE, 0); 1162 musb->intrrxe = 0; 1163 musb_writew(mbase, MUSB_INTRRXE, 0); 1164 1165 /* flush pending interrupts */ 1166 musb_clearb(mbase, MUSB_INTRUSB); 1167 musb_clearw(mbase, MUSB_INTRTX); 1168 musb_clearw(mbase, MUSB_INTRRX); 1169 } 1170 1171 static void musb_enable_interrupts(struct musb *musb) 1172 { 1173 void __iomem *regs = musb->mregs; 1174 1175 /* Set INT enable registers, enable interrupts */ 1176 musb->intrtxe = musb->epmask; 1177 musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); 1178 musb->intrrxe = musb->epmask & 0xfffe; 1179 musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); 1180 musb_writeb(regs, MUSB_INTRUSBE, 0xf7); 1181 1182 } 1183 1184 /* 1185 * Program the HDRC to start (enable interrupts, dma, etc.). 1186 */ 1187 void musb_start(struct musb *musb) 1188 { 1189 void __iomem *regs = musb->mregs; 1190 u8 devctl = musb_readb(regs, MUSB_DEVCTL); 1191 u8 power; 1192 1193 musb_dbg(musb, "<== devctl %02x", devctl); 1194 1195 musb_enable_interrupts(musb); 1196 musb_writeb(regs, MUSB_TESTMODE, 0); 1197 1198 power = MUSB_POWER_ISOUPDATE; 1199 /* 1200 * treating UNKNOWN as unspecified maximum speed, in which case 1201 * we will default to high-speed. 1202 */ 1203 if (musb->config->maximum_speed == USB_SPEED_HIGH || 1204 musb->config->maximum_speed == USB_SPEED_UNKNOWN) 1205 power |= MUSB_POWER_HSENAB; 1206 musb_writeb(regs, MUSB_POWER, power); 1207 1208 musb->is_active = 0; 1209 devctl = musb_readb(regs, MUSB_DEVCTL); 1210 devctl &= ~MUSB_DEVCTL_SESSION; 1211 1212 /* session started after: 1213 * (a) ID-grounded irq, host mode; 1214 * (b) vbus present/connect IRQ, peripheral mode; 1215 * (c) peripheral initiates, using SRP 1216 */ 1217 if (musb->port_mode != MUSB_HOST && 1218 musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && 1219 (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { 1220 musb->is_active = 1; 1221 } else { 1222 devctl |= MUSB_DEVCTL_SESSION; 1223 } 1224 1225 musb_platform_enable(musb); 1226 musb_writeb(regs, MUSB_DEVCTL, devctl); 1227 } 1228 1229 /* 1230 * Make the HDRC stop (disable interrupts, etc.); 1231 * reversible by musb_start 1232 * called on gadget driver unregister 1233 * with controller locked, irqs blocked 1234 * acts as a NOP unless some role activated the hardware 1235 */ 1236 void musb_stop(struct musb *musb) 1237 { 1238 /* stop IRQs, timers, ... */ 1239 musb_platform_disable(musb); 1240 musb_disable_interrupts(musb); 1241 musb_writeb(musb->mregs, MUSB_DEVCTL, 0); 1242 1243 /* FIXME 1244 * - mark host and/or peripheral drivers unusable/inactive 1245 * - disable DMA (and enable it in HdrcStart) 1246 * - make sure we can musb_start() after musb_stop(); with 1247 * OTG mode, gadget driver module rmmod/modprobe cycles that 1248 * - ... 1249 */ 1250 musb_platform_try_idle(musb, 0); 1251 } 1252 1253 /*-------------------------------------------------------------------------*/ 1254 1255 /* 1256 * The silicon either has hard-wired endpoint configurations, or else 1257 * "dynamic fifo" sizing. The driver has support for both, though at this 1258 * writing only the dynamic sizing is very well tested. Since we switched 1259 * away from compile-time hardware parameters, we can no longer rely on 1260 * dead code elimination to leave only the relevant one in the object file. 1261 * 1262 * We don't currently use dynamic fifo setup capability to do anything 1263 * more than selecting one of a bunch of predefined configurations. 1264 */ 1265 static ushort fifo_mode; 1266 1267 /* "modprobe ... fifo_mode=1" etc */ 1268 module_param(fifo_mode, ushort, 0); 1269 MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); 1270 1271 /* 1272 * tables defining fifo_mode values. define more if you like. 1273 * for host side, make sure both halves of ep1 are set up. 1274 */ 1275 1276 /* mode 0 - fits in 2KB */ 1277 static struct musb_fifo_cfg mode_0_cfg[] = { 1278 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, 1279 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, 1280 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, }, 1281 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, 1282 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, 1283 }; 1284 1285 /* mode 1 - fits in 4KB */ 1286 static struct musb_fifo_cfg mode_1_cfg[] = { 1287 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, 1288 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, 1289 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, }, 1290 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, 1291 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, 1292 }; 1293 1294 /* mode 2 - fits in 4KB */ 1295 static struct musb_fifo_cfg mode_2_cfg[] = { 1296 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, 1297 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, 1298 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, 1299 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, 1300 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 960, }, 1301 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 1024, }, 1302 }; 1303 1304 /* mode 3 - fits in 4KB */ 1305 static struct musb_fifo_cfg mode_3_cfg[] = { 1306 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, }, 1307 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, }, 1308 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, 1309 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, 1310 { .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, }, 1311 { .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, }, 1312 }; 1313 1314 /* mode 4 - fits in 16KB */ 1315 static struct musb_fifo_cfg mode_4_cfg[] = { 1316 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, 1317 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, 1318 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, 1319 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, 1320 { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, 1321 { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, 1322 { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, 1323 { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, 1324 { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, 1325 { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, 1326 { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, }, 1327 { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, }, 1328 { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, 1329 { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, }, 1330 { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, }, 1331 { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, }, 1332 { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, }, 1333 { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, }, 1334 { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, }, 1335 { .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, }, 1336 { .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, }, 1337 { .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, }, 1338 { .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, }, 1339 { .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, }, 1340 { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, }, 1341 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, 1342 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, 1343 }; 1344 1345 /* mode 5 - fits in 8KB */ 1346 static struct musb_fifo_cfg mode_5_cfg[] = { 1347 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, 1348 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, 1349 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, 1350 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, 1351 { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, 1352 { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, 1353 { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, 1354 { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, 1355 { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, 1356 { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, 1357 { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, }, 1358 { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, }, 1359 { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, }, 1360 { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, }, 1361 { .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, }, 1362 { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, }, 1363 { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, }, 1364 { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, }, 1365 { .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, }, 1366 { .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, }, 1367 { .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, }, 1368 { .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, }, 1369 { .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, }, 1370 { .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, }, 1371 { .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, }, 1372 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, 1373 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, 1374 }; 1375 1376 /* 1377 * configure a fifo; for non-shared endpoints, this may be called 1378 * once for a tx fifo and once for an rx fifo. 1379 * 1380 * returns negative errno or offset for next fifo. 1381 */ 1382 static int 1383 fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, 1384 const struct musb_fifo_cfg *cfg, u16 offset) 1385 { 1386 void __iomem *mbase = musb->mregs; 1387 int size = 0; 1388 u16 maxpacket = cfg->maxpacket; 1389 u16 c_off = offset >> 3; 1390 u8 c_size; 1391 1392 /* expect hw_ep has already been zero-initialized */ 1393 1394 size = ffs(max(maxpacket, (u16) 8)) - 1; 1395 maxpacket = 1 << size; 1396 1397 c_size = size - 3; 1398 if (cfg->mode == BUF_DOUBLE) { 1399 if ((offset + (maxpacket << 1)) > 1400 (1 << (musb->config->ram_bits + 2))) 1401 return -EMSGSIZE; 1402 c_size |= MUSB_FIFOSZ_DPB; 1403 } else { 1404 if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2))) 1405 return -EMSGSIZE; 1406 } 1407 1408 /* configure the FIFO */ 1409 musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum); 1410 1411 /* EP0 reserved endpoint for control, bidirectional; 1412 * EP1 reserved for bulk, two unidirectional halves. 1413 */ 1414 if (hw_ep->epnum == 1) 1415 musb->bulk_ep = hw_ep; 1416 /* REVISIT error check: be sure ep0 can both rx and tx ... */ 1417 switch (cfg->style) { 1418 case FIFO_TX: 1419 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); 1420 musb_writew(mbase, MUSB_TXFIFOADD, c_off); 1421 hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); 1422 hw_ep->max_packet_sz_tx = maxpacket; 1423 break; 1424 case FIFO_RX: 1425 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); 1426 musb_writew(mbase, MUSB_RXFIFOADD, c_off); 1427 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); 1428 hw_ep->max_packet_sz_rx = maxpacket; 1429 break; 1430 case FIFO_RXTX: 1431 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); 1432 musb_writew(mbase, MUSB_TXFIFOADD, c_off); 1433 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); 1434 hw_ep->max_packet_sz_rx = maxpacket; 1435 1436 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); 1437 musb_writew(mbase, MUSB_RXFIFOADD, c_off); 1438 hw_ep->tx_double_buffered = hw_ep->rx_double_buffered; 1439 hw_ep->max_packet_sz_tx = maxpacket; 1440 1441 hw_ep->is_shared_fifo = true; 1442 break; 1443 } 1444 1445 /* NOTE rx and tx endpoint irqs aren't managed separately, 1446 * which happens to be ok 1447 */ 1448 musb->epmask |= (1 << hw_ep->epnum); 1449 1450 return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0)); 1451 } 1452 1453 static struct musb_fifo_cfg ep0_cfg = { 1454 .style = FIFO_RXTX, .maxpacket = 64, 1455 }; 1456 1457 static int ep_config_from_table(struct musb *musb) 1458 { 1459 const struct musb_fifo_cfg *cfg; 1460 unsigned i, n; 1461 int offset; 1462 struct musb_hw_ep *hw_ep = musb->endpoints; 1463 1464 if (musb->config->fifo_cfg) { 1465 cfg = musb->config->fifo_cfg; 1466 n = musb->config->fifo_cfg_size; 1467 goto done; 1468 } 1469 1470 switch (fifo_mode) { 1471 default: 1472 fifo_mode = 0; 1473 fallthrough; 1474 case 0: 1475 cfg = mode_0_cfg; 1476 n = ARRAY_SIZE(mode_0_cfg); 1477 break; 1478 case 1: 1479 cfg = mode_1_cfg; 1480 n = ARRAY_SIZE(mode_1_cfg); 1481 break; 1482 case 2: 1483 cfg = mode_2_cfg; 1484 n = ARRAY_SIZE(mode_2_cfg); 1485 break; 1486 case 3: 1487 cfg = mode_3_cfg; 1488 n = ARRAY_SIZE(mode_3_cfg); 1489 break; 1490 case 4: 1491 cfg = mode_4_cfg; 1492 n = ARRAY_SIZE(mode_4_cfg); 1493 break; 1494 case 5: 1495 cfg = mode_5_cfg; 1496 n = ARRAY_SIZE(mode_5_cfg); 1497 break; 1498 } 1499 1500 pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode); 1501 1502 1503 done: 1504 offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0); 1505 /* assert(offset > 0) */ 1506 1507 /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would 1508 * be better than static musb->config->num_eps and DYN_FIFO_SIZE... 1509 */ 1510 1511 for (i = 0; i < n; i++) { 1512 u8 epn = cfg->hw_ep_num; 1513 1514 if (epn >= musb->config->num_eps) { 1515 pr_debug("%s: invalid ep %d\n", 1516 musb_driver_name, epn); 1517 return -EINVAL; 1518 } 1519 offset = fifo_setup(musb, hw_ep + epn, cfg++, offset); 1520 if (offset < 0) { 1521 pr_debug("%s: mem overrun, ep %d\n", 1522 musb_driver_name, epn); 1523 return offset; 1524 } 1525 epn++; 1526 musb->nr_endpoints = max(epn, musb->nr_endpoints); 1527 } 1528 1529 pr_debug("%s: %d/%d max ep, %d/%d memory\n", 1530 musb_driver_name, 1531 n + 1, musb->config->num_eps * 2 - 1, 1532 offset, (1 << (musb->config->ram_bits + 2))); 1533 1534 if (!musb->bulk_ep) { 1535 pr_debug("%s: missing bulk\n", musb_driver_name); 1536 return -EINVAL; 1537 } 1538 1539 return 0; 1540 } 1541 1542 1543 /* 1544 * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false 1545 * @param musb the controller 1546 */ 1547 static int ep_config_from_hw(struct musb *musb) 1548 { 1549 u8 epnum = 0; 1550 struct musb_hw_ep *hw_ep; 1551 void __iomem *mbase = musb->mregs; 1552 int ret = 0; 1553 1554 musb_dbg(musb, "<== static silicon ep config"); 1555 1556 /* FIXME pick up ep0 maxpacket size */ 1557 1558 for (epnum = 1; epnum < musb->config->num_eps; epnum++) { 1559 musb_ep_select(mbase, epnum); 1560 hw_ep = musb->endpoints + epnum; 1561 1562 ret = musb_read_fifosize(musb, hw_ep, epnum); 1563 if (ret < 0) 1564 break; 1565 1566 /* FIXME set up hw_ep->{rx,tx}_double_buffered */ 1567 1568 /* pick an RX/TX endpoint for bulk */ 1569 if (hw_ep->max_packet_sz_tx < 512 1570 || hw_ep->max_packet_sz_rx < 512) 1571 continue; 1572 1573 /* REVISIT: this algorithm is lazy, we should at least 1574 * try to pick a double buffered endpoint. 1575 */ 1576 if (musb->bulk_ep) 1577 continue; 1578 musb->bulk_ep = hw_ep; 1579 } 1580 1581 if (!musb->bulk_ep) { 1582 pr_debug("%s: missing bulk\n", musb_driver_name); 1583 return -EINVAL; 1584 } 1585 1586 return 0; 1587 } 1588 1589 enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, }; 1590 1591 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem; 1592 * configure endpoints, or take their config from silicon 1593 */ 1594 static int musb_core_init(u16 musb_type, struct musb *musb) 1595 { 1596 u8 reg; 1597 char *type; 1598 char aInfo[90]; 1599 void __iomem *mbase = musb->mregs; 1600 int status = 0; 1601 int i; 1602 1603 /* log core options (read using indexed model) */ 1604 reg = musb_read_configdata(mbase); 1605 1606 strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8"); 1607 if (reg & MUSB_CONFIGDATA_DYNFIFO) { 1608 strcat(aInfo, ", dyn FIFOs"); 1609 musb->dyn_fifo = true; 1610 } 1611 if (reg & MUSB_CONFIGDATA_MPRXE) { 1612 strcat(aInfo, ", bulk combine"); 1613 musb->bulk_combine = true; 1614 } 1615 if (reg & MUSB_CONFIGDATA_MPTXE) { 1616 strcat(aInfo, ", bulk split"); 1617 musb->bulk_split = true; 1618 } 1619 if (reg & MUSB_CONFIGDATA_HBRXE) { 1620 strcat(aInfo, ", HB-ISO Rx"); 1621 musb->hb_iso_rx = true; 1622 } 1623 if (reg & MUSB_CONFIGDATA_HBTXE) { 1624 strcat(aInfo, ", HB-ISO Tx"); 1625 musb->hb_iso_tx = true; 1626 } 1627 if (reg & MUSB_CONFIGDATA_SOFTCONE) 1628 strcat(aInfo, ", SoftConn"); 1629 1630 pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); 1631 1632 if (MUSB_CONTROLLER_MHDRC == musb_type) { 1633 musb->is_multipoint = 1; 1634 type = "M"; 1635 } else { 1636 musb->is_multipoint = 0; 1637 type = ""; 1638 if (IS_ENABLED(CONFIG_USB) && 1639 !IS_ENABLED(CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB)) { 1640 pr_err("%s: kernel must disable external hubs, please fix the configuration\n", 1641 musb_driver_name); 1642 } 1643 } 1644 1645 /* log release info */ 1646 musb->hwvers = musb_readw(mbase, MUSB_HWVERS); 1647 pr_debug("%s: %sHDRC RTL version %d.%d%s\n", 1648 musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers), 1649 MUSB_HWVERS_MINOR(musb->hwvers), 1650 (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : ""); 1651 1652 /* configure ep0 */ 1653 musb_configure_ep0(musb); 1654 1655 /* discover endpoint configuration */ 1656 musb->nr_endpoints = 1; 1657 musb->epmask = 1; 1658 1659 if (musb->dyn_fifo) 1660 status = ep_config_from_table(musb); 1661 else 1662 status = ep_config_from_hw(musb); 1663 1664 if (status < 0) 1665 return status; 1666 1667 /* finish init, and print endpoint config */ 1668 for (i = 0; i < musb->nr_endpoints; i++) { 1669 struct musb_hw_ep *hw_ep = musb->endpoints + i; 1670 1671 hw_ep->fifo = musb->io.fifo_offset(i) + mbase; 1672 #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) 1673 if (musb->ops->quirks & MUSB_IN_TUSB) { 1674 hw_ep->fifo_async = musb->async + 0x400 + 1675 musb->io.fifo_offset(i); 1676 hw_ep->fifo_sync = musb->sync + 0x400 + 1677 musb->io.fifo_offset(i); 1678 hw_ep->fifo_sync_va = 1679 musb->sync_va + 0x400 + musb->io.fifo_offset(i); 1680 1681 if (i == 0) 1682 hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF; 1683 else 1684 hw_ep->conf = mbase + 0x400 + 1685 (((i - 1) & 0xf) << 2); 1686 } 1687 #endif 1688 1689 hw_ep->regs = musb->io.ep_offset(i, 0) + mbase; 1690 hw_ep->rx_reinit = 1; 1691 hw_ep->tx_reinit = 1; 1692 1693 if (hw_ep->max_packet_sz_tx) { 1694 musb_dbg(musb, "%s: hw_ep %d%s, %smax %d", 1695 musb_driver_name, i, 1696 hw_ep->is_shared_fifo ? "shared" : "tx", 1697 hw_ep->tx_double_buffered 1698 ? "doublebuffer, " : "", 1699 hw_ep->max_packet_sz_tx); 1700 } 1701 if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) { 1702 musb_dbg(musb, "%s: hw_ep %d%s, %smax %d", 1703 musb_driver_name, i, 1704 "rx", 1705 hw_ep->rx_double_buffered 1706 ? "doublebuffer, " : "", 1707 hw_ep->max_packet_sz_rx); 1708 } 1709 if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx)) 1710 musb_dbg(musb, "hw_ep %d not configured", i); 1711 } 1712 1713 return 0; 1714 } 1715 1716 /*-------------------------------------------------------------------------*/ 1717 1718 /* 1719 * handle all the irqs defined by the HDRC core. for now we expect: other 1720 * irq sources (phy, dma, etc) will be handled first, musb->int_* values 1721 * will be assigned, and the irq will already have been acked. 1722 * 1723 * called in irq context with spinlock held, irqs blocked 1724 */ 1725 irqreturn_t musb_interrupt(struct musb *musb) 1726 { 1727 irqreturn_t retval = IRQ_NONE; 1728 unsigned long status; 1729 unsigned long epnum; 1730 u8 devctl; 1731 1732 if (!musb->int_usb && !musb->int_tx && !musb->int_rx) 1733 return IRQ_NONE; 1734 1735 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 1736 1737 trace_musb_isr(musb); 1738 1739 /** 1740 * According to Mentor Graphics' documentation, flowchart on page 98, 1741 * IRQ should be handled as follows: 1742 * 1743 * . Resume IRQ 1744 * . Session Request IRQ 1745 * . VBUS Error IRQ 1746 * . Suspend IRQ 1747 * . Connect IRQ 1748 * . Disconnect IRQ 1749 * . Reset/Babble IRQ 1750 * . SOF IRQ (we're not using this one) 1751 * . Endpoint 0 IRQ 1752 * . TX Endpoints 1753 * . RX Endpoints 1754 * 1755 * We will be following that flowchart in order to avoid any problems 1756 * that might arise with internal Finite State Machine. 1757 */ 1758 1759 if (musb->int_usb) 1760 retval |= musb_stage0_irq(musb, musb->int_usb, devctl); 1761 1762 if (musb->int_tx & 1) { 1763 if (is_host_active(musb)) 1764 retval |= musb_h_ep0_irq(musb); 1765 else 1766 retval |= musb_g_ep0_irq(musb); 1767 1768 /* we have just handled endpoint 0 IRQ, clear it */ 1769 musb->int_tx &= ~BIT(0); 1770 } 1771 1772 status = musb->int_tx; 1773 1774 for_each_set_bit(epnum, &status, 16) { 1775 retval = IRQ_HANDLED; 1776 if (is_host_active(musb)) 1777 musb_host_tx(musb, epnum); 1778 else 1779 musb_g_tx(musb, epnum); 1780 } 1781 1782 status = musb->int_rx; 1783 1784 for_each_set_bit(epnum, &status, 16) { 1785 retval = IRQ_HANDLED; 1786 if (is_host_active(musb)) 1787 musb_host_rx(musb, epnum); 1788 else 1789 musb_g_rx(musb, epnum); 1790 } 1791 1792 return retval; 1793 } 1794 EXPORT_SYMBOL_GPL(musb_interrupt); 1795 1796 #ifndef CONFIG_MUSB_PIO_ONLY 1797 static bool use_dma = true; 1798 1799 /* "modprobe ... use_dma=0" etc */ 1800 module_param(use_dma, bool, 0644); 1801 MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); 1802 1803 void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) 1804 { 1805 /* called with controller lock already held */ 1806 1807 if (!epnum) { 1808 if (!is_cppi_enabled(musb)) { 1809 /* endpoint 0 */ 1810 if (is_host_active(musb)) 1811 musb_h_ep0_irq(musb); 1812 else 1813 musb_g_ep0_irq(musb); 1814 } 1815 } else { 1816 /* endpoints 1..15 */ 1817 if (transmit) { 1818 if (is_host_active(musb)) 1819 musb_host_tx(musb, epnum); 1820 else 1821 musb_g_tx(musb, epnum); 1822 } else { 1823 /* receive */ 1824 if (is_host_active(musb)) 1825 musb_host_rx(musb, epnum); 1826 else 1827 musb_g_rx(musb, epnum); 1828 } 1829 } 1830 } 1831 EXPORT_SYMBOL_GPL(musb_dma_completion); 1832 1833 #else 1834 #define use_dma 0 1835 #endif 1836 1837 static int (*musb_phy_callback)(enum musb_vbus_id_status status); 1838 1839 /* 1840 * musb_mailbox - optional phy notifier function 1841 * @status phy state change 1842 * 1843 * Optionally gets called from the USB PHY. Note that the USB PHY must be 1844 * disabled at the point the phy_callback is registered or unregistered. 1845 */ 1846 int musb_mailbox(enum musb_vbus_id_status status) 1847 { 1848 if (musb_phy_callback) 1849 return musb_phy_callback(status); 1850 1851 return -ENODEV; 1852 }; 1853 EXPORT_SYMBOL_GPL(musb_mailbox); 1854 1855 /*-------------------------------------------------------------------------*/ 1856 1857 static ssize_t 1858 mode_show(struct device *dev, struct device_attribute *attr, char *buf) 1859 { 1860 struct musb *musb = dev_to_musb(dev); 1861 unsigned long flags; 1862 int ret; 1863 1864 spin_lock_irqsave(&musb->lock, flags); 1865 ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state)); 1866 spin_unlock_irqrestore(&musb->lock, flags); 1867 1868 return ret; 1869 } 1870 1871 static ssize_t 1872 mode_store(struct device *dev, struct device_attribute *attr, 1873 const char *buf, size_t n) 1874 { 1875 struct musb *musb = dev_to_musb(dev); 1876 unsigned long flags; 1877 int status; 1878 1879 spin_lock_irqsave(&musb->lock, flags); 1880 if (sysfs_streq(buf, "host")) 1881 status = musb_platform_set_mode(musb, MUSB_HOST); 1882 else if (sysfs_streq(buf, "peripheral")) 1883 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL); 1884 else if (sysfs_streq(buf, "otg")) 1885 status = musb_platform_set_mode(musb, MUSB_OTG); 1886 else 1887 status = -EINVAL; 1888 spin_unlock_irqrestore(&musb->lock, flags); 1889 1890 return (status == 0) ? n : status; 1891 } 1892 static DEVICE_ATTR_RW(mode); 1893 1894 static ssize_t 1895 vbus_store(struct device *dev, struct device_attribute *attr, 1896 const char *buf, size_t n) 1897 { 1898 struct musb *musb = dev_to_musb(dev); 1899 unsigned long flags; 1900 unsigned long val; 1901 1902 if (sscanf(buf, "%lu", &val) < 1) { 1903 dev_err(dev, "Invalid VBUS timeout ms value\n"); 1904 return -EINVAL; 1905 } 1906 1907 spin_lock_irqsave(&musb->lock, flags); 1908 /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */ 1909 musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ; 1910 if (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) 1911 musb->is_active = 0; 1912 musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); 1913 spin_unlock_irqrestore(&musb->lock, flags); 1914 1915 return n; 1916 } 1917 1918 static ssize_t 1919 vbus_show(struct device *dev, struct device_attribute *attr, char *buf) 1920 { 1921 struct musb *musb = dev_to_musb(dev); 1922 unsigned long flags; 1923 unsigned long val; 1924 int vbus; 1925 u8 devctl; 1926 1927 pm_runtime_get_sync(dev); 1928 spin_lock_irqsave(&musb->lock, flags); 1929 val = musb->a_wait_bcon; 1930 vbus = musb_platform_get_vbus_status(musb); 1931 if (vbus < 0) { 1932 /* Use default MUSB method by means of DEVCTL register */ 1933 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 1934 if ((devctl & MUSB_DEVCTL_VBUS) 1935 == (3 << MUSB_DEVCTL_VBUS_SHIFT)) 1936 vbus = 1; 1937 else 1938 vbus = 0; 1939 } 1940 spin_unlock_irqrestore(&musb->lock, flags); 1941 pm_runtime_put_sync(dev); 1942 1943 return sprintf(buf, "Vbus %s, timeout %lu msec\n", 1944 vbus ? "on" : "off", val); 1945 } 1946 static DEVICE_ATTR_RW(vbus); 1947 1948 /* Gadget drivers can't know that a host is connected so they might want 1949 * to start SRP, but users can. This allows userspace to trigger SRP. 1950 */ 1951 static ssize_t srp_store(struct device *dev, struct device_attribute *attr, 1952 const char *buf, size_t n) 1953 { 1954 struct musb *musb = dev_to_musb(dev); 1955 unsigned short srp; 1956 1957 if (sscanf(buf, "%hu", &srp) != 1 1958 || (srp != 1)) { 1959 dev_err(dev, "SRP: Value must be 1\n"); 1960 return -EINVAL; 1961 } 1962 1963 if (srp == 1) 1964 musb_g_wakeup(musb); 1965 1966 return n; 1967 } 1968 static DEVICE_ATTR_WO(srp); 1969 1970 static struct attribute *musb_attrs[] = { 1971 &dev_attr_mode.attr, 1972 &dev_attr_vbus.attr, 1973 &dev_attr_srp.attr, 1974 NULL 1975 }; 1976 ATTRIBUTE_GROUPS(musb); 1977 1978 #define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \ 1979 (2 << MUSB_DEVCTL_VBUS_SHIFT) | \ 1980 MUSB_DEVCTL_SESSION) 1981 #define MUSB_QUIRK_B_DISCONNECT_99 (MUSB_DEVCTL_BDEVICE | \ 1982 (3 << MUSB_DEVCTL_VBUS_SHIFT) | \ 1983 MUSB_DEVCTL_SESSION) 1984 #define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \ 1985 MUSB_DEVCTL_SESSION) 1986 1987 /* 1988 * Check the musb devctl session bit to determine if we want to 1989 * allow PM runtime for the device. In general, we want to keep things 1990 * active when the session bit is set except after host disconnect. 1991 * 1992 * Only called from musb_irq_work. If this ever needs to get called 1993 * elsewhere, proper locking must be implemented for musb->session. 1994 */ 1995 static void musb_pm_runtime_check_session(struct musb *musb) 1996 { 1997 u8 devctl, s; 1998 int error; 1999 2000 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 2001 2002 /* Handle session status quirks first */ 2003 s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV | 2004 MUSB_DEVCTL_HR; 2005 switch (devctl & ~s) { 2006 case MUSB_QUIRK_B_DISCONNECT_99: 2007 musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n"); 2008 schedule_delayed_work(&musb->irq_work, 2009 msecs_to_jiffies(1000)); 2010 break; 2011 case MUSB_QUIRK_B_INVALID_VBUS_91: 2012 if (musb->quirk_retries && !musb->flush_irq_work) { 2013 musb_dbg(musb, 2014 "Poll devctl on invalid vbus, assume no session"); 2015 schedule_delayed_work(&musb->irq_work, 2016 msecs_to_jiffies(1000)); 2017 musb->quirk_retries--; 2018 return; 2019 } 2020 fallthrough; 2021 case MUSB_QUIRK_A_DISCONNECT_19: 2022 if (musb->quirk_retries && !musb->flush_irq_work) { 2023 musb_dbg(musb, 2024 "Poll devctl on possible host mode disconnect"); 2025 schedule_delayed_work(&musb->irq_work, 2026 msecs_to_jiffies(1000)); 2027 musb->quirk_retries--; 2028 return; 2029 } 2030 if (!musb->session) 2031 break; 2032 musb_dbg(musb, "Allow PM on possible host mode disconnect"); 2033 pm_runtime_mark_last_busy(musb->controller); 2034 pm_runtime_put_autosuspend(musb->controller); 2035 musb->session = false; 2036 return; 2037 default: 2038 break; 2039 } 2040 2041 /* No need to do anything if session has not changed */ 2042 s = devctl & MUSB_DEVCTL_SESSION; 2043 if (s == musb->session) 2044 return; 2045 2046 /* Block PM or allow PM? */ 2047 if (s) { 2048 musb_dbg(musb, "Block PM on active session: %02x", devctl); 2049 error = pm_runtime_get_sync(musb->controller); 2050 if (error < 0) 2051 dev_err(musb->controller, "Could not enable: %i\n", 2052 error); 2053 musb->quirk_retries = 3; 2054 } else { 2055 musb_dbg(musb, "Allow PM with no session: %02x", devctl); 2056 pm_runtime_mark_last_busy(musb->controller); 2057 pm_runtime_put_autosuspend(musb->controller); 2058 } 2059 2060 musb->session = s; 2061 } 2062 2063 /* Only used to provide driver mode change events */ 2064 static void musb_irq_work(struct work_struct *data) 2065 { 2066 struct musb *musb = container_of(data, struct musb, irq_work.work); 2067 int error; 2068 2069 error = pm_runtime_get_sync(musb->controller); 2070 if (error < 0) { 2071 dev_err(musb->controller, "Could not enable: %i\n", error); 2072 2073 return; 2074 } 2075 2076 musb_pm_runtime_check_session(musb); 2077 2078 if (musb->xceiv->otg->state != musb->xceiv_old_state) { 2079 musb->xceiv_old_state = musb->xceiv->otg->state; 2080 sysfs_notify(&musb->controller->kobj, NULL, "mode"); 2081 } 2082 2083 pm_runtime_mark_last_busy(musb->controller); 2084 pm_runtime_put_autosuspend(musb->controller); 2085 } 2086 2087 static void musb_recover_from_babble(struct musb *musb) 2088 { 2089 int ret; 2090 u8 devctl; 2091 2092 musb_disable_interrupts(musb); 2093 2094 /* 2095 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give 2096 * it some slack and wait for 10us. 2097 */ 2098 udelay(10); 2099 2100 ret = musb_platform_recover(musb); 2101 if (ret) { 2102 musb_enable_interrupts(musb); 2103 return; 2104 } 2105 2106 /* drop session bit */ 2107 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 2108 devctl &= ~MUSB_DEVCTL_SESSION; 2109 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 2110 2111 /* tell usbcore about it */ 2112 musb_root_disconnect(musb); 2113 2114 /* 2115 * When a babble condition occurs, the musb controller 2116 * removes the session bit and the endpoint config is lost. 2117 */ 2118 if (musb->dyn_fifo) 2119 ret = ep_config_from_table(musb); 2120 else 2121 ret = ep_config_from_hw(musb); 2122 2123 /* restart session */ 2124 if (ret == 0) 2125 musb_start(musb); 2126 } 2127 2128 /* -------------------------------------------------------------------------- 2129 * Init support 2130 */ 2131 2132 static struct musb *allocate_instance(struct device *dev, 2133 const struct musb_hdrc_config *config, void __iomem *mbase) 2134 { 2135 struct musb *musb; 2136 struct musb_hw_ep *ep; 2137 int epnum; 2138 int ret; 2139 2140 musb = devm_kzalloc(dev, sizeof(*musb), GFP_KERNEL); 2141 if (!musb) 2142 return NULL; 2143 2144 INIT_LIST_HEAD(&musb->control); 2145 INIT_LIST_HEAD(&musb->in_bulk); 2146 INIT_LIST_HEAD(&musb->out_bulk); 2147 INIT_LIST_HEAD(&musb->pending_list); 2148 2149 musb->vbuserr_retry = VBUSERR_RETRY_COUNT; 2150 musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; 2151 musb->mregs = mbase; 2152 musb->ctrl_base = mbase; 2153 musb->nIrq = -ENODEV; 2154 musb->config = config; 2155 BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS); 2156 for (epnum = 0, ep = musb->endpoints; 2157 epnum < musb->config->num_eps; 2158 epnum++, ep++) { 2159 ep->musb = musb; 2160 ep->epnum = epnum; 2161 } 2162 2163 musb->controller = dev; 2164 2165 ret = musb_host_alloc(musb); 2166 if (ret < 0) 2167 goto err_free; 2168 2169 dev_set_drvdata(dev, musb); 2170 2171 return musb; 2172 2173 err_free: 2174 return NULL; 2175 } 2176 2177 static void musb_free(struct musb *musb) 2178 { 2179 /* this has multiple entry modes. it handles fault cleanup after 2180 * probe(), where things may be partially set up, as well as rmmod 2181 * cleanup after everything's been de-activated. 2182 */ 2183 2184 if (musb->nIrq >= 0) { 2185 if (musb->irq_wake) 2186 disable_irq_wake(musb->nIrq); 2187 free_irq(musb->nIrq, musb); 2188 } 2189 2190 musb_host_free(musb); 2191 } 2192 2193 struct musb_pending_work { 2194 int (*callback)(struct musb *musb, void *data); 2195 void *data; 2196 struct list_head node; 2197 }; 2198 2199 #ifdef CONFIG_PM 2200 /* 2201 * Called from musb_runtime_resume(), musb_resume(), and 2202 * musb_queue_resume_work(). Callers must take musb->lock. 2203 */ 2204 static int musb_run_resume_work(struct musb *musb) 2205 { 2206 struct musb_pending_work *w, *_w; 2207 unsigned long flags; 2208 int error = 0; 2209 2210 spin_lock_irqsave(&musb->list_lock, flags); 2211 list_for_each_entry_safe(w, _w, &musb->pending_list, node) { 2212 if (w->callback) { 2213 error = w->callback(musb, w->data); 2214 if (error < 0) { 2215 dev_err(musb->controller, 2216 "resume callback %p failed: %i\n", 2217 w->callback, error); 2218 } 2219 } 2220 list_del(&w->node); 2221 devm_kfree(musb->controller, w); 2222 } 2223 spin_unlock_irqrestore(&musb->list_lock, flags); 2224 2225 return error; 2226 } 2227 #endif 2228 2229 /* 2230 * Called to run work if device is active or else queue the work to happen 2231 * on resume. Caller must take musb->lock and must hold an RPM reference. 2232 * 2233 * Note that we cowardly refuse queuing work after musb PM runtime 2234 * resume is done calling musb_run_resume_work() and return -EINPROGRESS 2235 * instead. 2236 */ 2237 int musb_queue_resume_work(struct musb *musb, 2238 int (*callback)(struct musb *musb, void *data), 2239 void *data) 2240 { 2241 struct musb_pending_work *w; 2242 unsigned long flags; 2243 bool is_suspended; 2244 int error; 2245 2246 if (WARN_ON(!callback)) 2247 return -EINVAL; 2248 2249 spin_lock_irqsave(&musb->list_lock, flags); 2250 is_suspended = musb->is_runtime_suspended; 2251 2252 if (is_suspended) { 2253 w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC); 2254 if (!w) { 2255 error = -ENOMEM; 2256 goto out_unlock; 2257 } 2258 2259 w->callback = callback; 2260 w->data = data; 2261 2262 list_add_tail(&w->node, &musb->pending_list); 2263 error = 0; 2264 } 2265 2266 out_unlock: 2267 spin_unlock_irqrestore(&musb->list_lock, flags); 2268 2269 if (!is_suspended) 2270 error = callback(musb, data); 2271 2272 return error; 2273 } 2274 EXPORT_SYMBOL_GPL(musb_queue_resume_work); 2275 2276 static void musb_deassert_reset(struct work_struct *work) 2277 { 2278 struct musb *musb; 2279 unsigned long flags; 2280 2281 musb = container_of(work, struct musb, deassert_reset_work.work); 2282 2283 spin_lock_irqsave(&musb->lock, flags); 2284 2285 if (musb->port1_status & USB_PORT_STAT_RESET) 2286 musb_port_reset(musb, false); 2287 2288 spin_unlock_irqrestore(&musb->lock, flags); 2289 } 2290 2291 /* 2292 * Perform generic per-controller initialization. 2293 * 2294 * @dev: the controller (already clocked, etc) 2295 * @nIrq: IRQ number 2296 * @ctrl: virtual address of controller registers, 2297 * not yet corrected for platform-specific offsets 2298 */ 2299 static int 2300 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) 2301 { 2302 int status; 2303 struct musb *musb; 2304 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); 2305 2306 /* The driver might handle more features than the board; OK. 2307 * Fail when the board needs a feature that's not enabled. 2308 */ 2309 if (!plat) { 2310 dev_err(dev, "no platform_data?\n"); 2311 status = -ENODEV; 2312 goto fail0; 2313 } 2314 2315 /* allocate */ 2316 musb = allocate_instance(dev, plat->config, ctrl); 2317 if (!musb) { 2318 status = -ENOMEM; 2319 goto fail0; 2320 } 2321 2322 spin_lock_init(&musb->lock); 2323 spin_lock_init(&musb->list_lock); 2324 musb->board_set_power = plat->set_power; 2325 musb->min_power = plat->min_power; 2326 musb->ops = plat->platform_ops; 2327 musb->port_mode = plat->mode; 2328 2329 /* 2330 * Initialize the default IO functions. At least omap2430 needs 2331 * these early. We initialize the platform specific IO functions 2332 * later on. 2333 */ 2334 musb_readb = musb_default_readb; 2335 musb_writeb = musb_default_writeb; 2336 musb_readw = musb_default_readw; 2337 musb_writew = musb_default_writew; 2338 2339 /* The musb_platform_init() call: 2340 * - adjusts musb->mregs 2341 * - sets the musb->isr 2342 * - may initialize an integrated transceiver 2343 * - initializes musb->xceiv, usually by otg_get_phy() 2344 * - stops powering VBUS 2345 * 2346 * There are various transceiver configurations. 2347 * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses 2348 * external/discrete ones in various flavors (twl4030 family, 2349 * isp1504, non-OTG, etc) mostly hooking up through ULPI. 2350 */ 2351 status = musb_platform_init(musb); 2352 if (status < 0) 2353 goto fail1; 2354 2355 if (!musb->isr) { 2356 status = -ENODEV; 2357 goto fail2; 2358 } 2359 2360 2361 /* Most devices use indexed offset or flat offset */ 2362 if (musb->ops->quirks & MUSB_INDEXED_EP) { 2363 musb->io.ep_offset = musb_indexed_ep_offset; 2364 musb->io.ep_select = musb_indexed_ep_select; 2365 } else { 2366 musb->io.ep_offset = musb_flat_ep_offset; 2367 musb->io.ep_select = musb_flat_ep_select; 2368 } 2369 2370 if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE) 2371 musb->g.quirk_avoids_skb_reserve = 1; 2372 2373 /* At least tusb6010 has its own offsets */ 2374 if (musb->ops->ep_offset) 2375 musb->io.ep_offset = musb->ops->ep_offset; 2376 if (musb->ops->ep_select) 2377 musb->io.ep_select = musb->ops->ep_select; 2378 2379 if (musb->ops->fifo_mode) 2380 fifo_mode = musb->ops->fifo_mode; 2381 else 2382 fifo_mode = 4; 2383 2384 if (musb->ops->fifo_offset) 2385 musb->io.fifo_offset = musb->ops->fifo_offset; 2386 else 2387 musb->io.fifo_offset = musb_default_fifo_offset; 2388 2389 if (musb->ops->busctl_offset) 2390 musb->io.busctl_offset = musb->ops->busctl_offset; 2391 else 2392 musb->io.busctl_offset = musb_default_busctl_offset; 2393 2394 if (musb->ops->readb) 2395 musb_readb = musb->ops->readb; 2396 if (musb->ops->writeb) 2397 musb_writeb = musb->ops->writeb; 2398 if (musb->ops->clearb) 2399 musb_clearb = musb->ops->clearb; 2400 else 2401 musb_clearb = musb_readb; 2402 2403 if (musb->ops->readw) 2404 musb_readw = musb->ops->readw; 2405 if (musb->ops->writew) 2406 musb_writew = musb->ops->writew; 2407 if (musb->ops->clearw) 2408 musb_clearw = musb->ops->clearw; 2409 else 2410 musb_clearw = musb_readw; 2411 2412 #ifndef CONFIG_MUSB_PIO_ONLY 2413 if (!musb->ops->dma_init || !musb->ops->dma_exit) { 2414 dev_err(dev, "DMA controller not set\n"); 2415 status = -ENODEV; 2416 goto fail2; 2417 } 2418 musb_dma_controller_create = musb->ops->dma_init; 2419 musb_dma_controller_destroy = musb->ops->dma_exit; 2420 #endif 2421 2422 if (musb->ops->read_fifo) 2423 musb->io.read_fifo = musb->ops->read_fifo; 2424 else 2425 musb->io.read_fifo = musb_default_read_fifo; 2426 2427 if (musb->ops->write_fifo) 2428 musb->io.write_fifo = musb->ops->write_fifo; 2429 else 2430 musb->io.write_fifo = musb_default_write_fifo; 2431 2432 if (musb->ops->get_toggle) 2433 musb->io.get_toggle = musb->ops->get_toggle; 2434 else 2435 musb->io.get_toggle = musb_default_get_toggle; 2436 2437 if (musb->ops->set_toggle) 2438 musb->io.set_toggle = musb->ops->set_toggle; 2439 else 2440 musb->io.set_toggle = musb_default_set_toggle; 2441 2442 if (!musb->xceiv->io_ops) { 2443 musb->xceiv->io_dev = musb->controller; 2444 musb->xceiv->io_priv = musb->mregs; 2445 musb->xceiv->io_ops = &musb_ulpi_access; 2446 } 2447 2448 if (musb->ops->phy_callback) 2449 musb_phy_callback = musb->ops->phy_callback; 2450 2451 /* 2452 * We need musb_read/write functions initialized for PM. 2453 * Note that at least 2430 glue needs autosuspend delay 2454 * somewhere above 300 ms for the hardware to idle properly 2455 * after disconnecting the cable in host mode. Let's use 2456 * 500 ms for some margin. 2457 */ 2458 pm_runtime_use_autosuspend(musb->controller); 2459 pm_runtime_set_autosuspend_delay(musb->controller, 500); 2460 pm_runtime_enable(musb->controller); 2461 pm_runtime_get_sync(musb->controller); 2462 2463 status = usb_phy_init(musb->xceiv); 2464 if (status < 0) 2465 goto err_usb_phy_init; 2466 2467 if (use_dma && dev->dma_mask) { 2468 musb->dma_controller = 2469 musb_dma_controller_create(musb, musb->mregs); 2470 if (IS_ERR(musb->dma_controller)) { 2471 status = PTR_ERR(musb->dma_controller); 2472 goto fail2_5; 2473 } 2474 } 2475 2476 /* be sure interrupts are disabled before connecting ISR */ 2477 musb_platform_disable(musb); 2478 musb_disable_interrupts(musb); 2479 musb_writeb(musb->mregs, MUSB_DEVCTL, 0); 2480 2481 /* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */ 2482 musb_writeb(musb->mregs, MUSB_POWER, 0); 2483 2484 /* Init IRQ workqueue before request_irq */ 2485 INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work); 2486 INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset); 2487 INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume); 2488 2489 /* setup musb parts of the core (especially endpoints) */ 2490 status = musb_core_init(plat->config->multipoint 2491 ? MUSB_CONTROLLER_MHDRC 2492 : MUSB_CONTROLLER_HDRC, musb); 2493 if (status < 0) 2494 goto fail3; 2495 2496 timer_setup(&musb->otg_timer, musb_otg_timer_func, 0); 2497 2498 /* attach to the IRQ */ 2499 if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) { 2500 dev_err(dev, "request_irq %d failed!\n", nIrq); 2501 status = -ENODEV; 2502 goto fail3; 2503 } 2504 musb->nIrq = nIrq; 2505 /* FIXME this handles wakeup irqs wrong */ 2506 if (enable_irq_wake(nIrq) == 0) { 2507 musb->irq_wake = 1; 2508 device_init_wakeup(dev, 1); 2509 } else { 2510 musb->irq_wake = 0; 2511 } 2512 2513 /* program PHY to use external vBus if required */ 2514 if (plat->extvbus) { 2515 u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); 2516 busctl |= MUSB_ULPI_USE_EXTVBUS; 2517 musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); 2518 } 2519 2520 MUSB_DEV_MODE(musb); 2521 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 2522 2523 switch (musb->port_mode) { 2524 case MUSB_HOST: 2525 status = musb_host_setup(musb, plat->power); 2526 if (status < 0) 2527 goto fail3; 2528 status = musb_platform_set_mode(musb, MUSB_HOST); 2529 break; 2530 case MUSB_PERIPHERAL: 2531 status = musb_gadget_setup(musb); 2532 if (status < 0) 2533 goto fail3; 2534 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL); 2535 break; 2536 case MUSB_OTG: 2537 status = musb_host_setup(musb, plat->power); 2538 if (status < 0) 2539 goto fail3; 2540 status = musb_gadget_setup(musb); 2541 if (status) { 2542 musb_host_cleanup(musb); 2543 goto fail3; 2544 } 2545 status = musb_platform_set_mode(musb, MUSB_OTG); 2546 break; 2547 default: 2548 dev_err(dev, "unsupported port mode %d\n", musb->port_mode); 2549 break; 2550 } 2551 2552 if (status < 0) 2553 goto fail3; 2554 2555 musb_init_debugfs(musb); 2556 2557 musb->is_initialized = 1; 2558 pm_runtime_mark_last_busy(musb->controller); 2559 pm_runtime_put_autosuspend(musb->controller); 2560 2561 return 0; 2562 2563 fail3: 2564 cancel_delayed_work_sync(&musb->irq_work); 2565 cancel_delayed_work_sync(&musb->finish_resume_work); 2566 cancel_delayed_work_sync(&musb->deassert_reset_work); 2567 if (musb->dma_controller) 2568 musb_dma_controller_destroy(musb->dma_controller); 2569 2570 fail2_5: 2571 usb_phy_shutdown(musb->xceiv); 2572 2573 err_usb_phy_init: 2574 pm_runtime_dont_use_autosuspend(musb->controller); 2575 pm_runtime_put_sync(musb->controller); 2576 pm_runtime_disable(musb->controller); 2577 2578 fail2: 2579 if (musb->irq_wake) 2580 device_init_wakeup(dev, 0); 2581 musb_platform_exit(musb); 2582 2583 fail1: 2584 if (status != -EPROBE_DEFER) 2585 dev_err(musb->controller, 2586 "%s failed with status %d\n", __func__, status); 2587 2588 musb_free(musb); 2589 2590 fail0: 2591 2592 return status; 2593 2594 } 2595 2596 /*-------------------------------------------------------------------------*/ 2597 2598 /* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just 2599 * bridge to a platform device; this driver then suffices. 2600 */ 2601 static int musb_probe(struct platform_device *pdev) 2602 { 2603 struct device *dev = &pdev->dev; 2604 int irq = platform_get_irq_byname(pdev, "mc"); 2605 void __iomem *base; 2606 2607 if (irq <= 0) 2608 return -ENODEV; 2609 2610 base = devm_platform_ioremap_resource(pdev, 0); 2611 if (IS_ERR(base)) 2612 return PTR_ERR(base); 2613 2614 return musb_init_controller(dev, irq, base); 2615 } 2616 2617 static int musb_remove(struct platform_device *pdev) 2618 { 2619 struct device *dev = &pdev->dev; 2620 struct musb *musb = dev_to_musb(dev); 2621 unsigned long flags; 2622 2623 /* this gets called on rmmod. 2624 * - Host mode: host may still be active 2625 * - Peripheral mode: peripheral is deactivated (or never-activated) 2626 * - OTG mode: both roles are deactivated (or never-activated) 2627 */ 2628 musb_exit_debugfs(musb); 2629 2630 cancel_delayed_work_sync(&musb->irq_work); 2631 cancel_delayed_work_sync(&musb->finish_resume_work); 2632 cancel_delayed_work_sync(&musb->deassert_reset_work); 2633 pm_runtime_get_sync(musb->controller); 2634 musb_host_cleanup(musb); 2635 musb_gadget_cleanup(musb); 2636 2637 musb_platform_disable(musb); 2638 spin_lock_irqsave(&musb->lock, flags); 2639 musb_disable_interrupts(musb); 2640 musb_writeb(musb->mregs, MUSB_DEVCTL, 0); 2641 spin_unlock_irqrestore(&musb->lock, flags); 2642 musb_platform_exit(musb); 2643 2644 pm_runtime_dont_use_autosuspend(musb->controller); 2645 pm_runtime_put_sync(musb->controller); 2646 pm_runtime_disable(musb->controller); 2647 musb_phy_callback = NULL; 2648 if (musb->dma_controller) 2649 musb_dma_controller_destroy(musb->dma_controller); 2650 usb_phy_shutdown(musb->xceiv); 2651 musb_free(musb); 2652 device_init_wakeup(dev, 0); 2653 return 0; 2654 } 2655 2656 #ifdef CONFIG_PM 2657 2658 static void musb_save_context(struct musb *musb) 2659 { 2660 int i; 2661 void __iomem *musb_base = musb->mregs; 2662 void __iomem *epio; 2663 2664 musb->context.frame = musb_readw(musb_base, MUSB_FRAME); 2665 musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); 2666 musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL); 2667 musb->context.power = musb_readb(musb_base, MUSB_POWER); 2668 musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); 2669 musb->context.index = musb_readb(musb_base, MUSB_INDEX); 2670 musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL); 2671 2672 for (i = 0; i < musb->config->num_eps; ++i) { 2673 struct musb_hw_ep *hw_ep; 2674 2675 hw_ep = &musb->endpoints[i]; 2676 if (!hw_ep) 2677 continue; 2678 2679 epio = hw_ep->regs; 2680 if (!epio) 2681 continue; 2682 2683 musb_writeb(musb_base, MUSB_INDEX, i); 2684 musb->context.index_regs[i].txmaxp = 2685 musb_readw(epio, MUSB_TXMAXP); 2686 musb->context.index_regs[i].txcsr = 2687 musb_readw(epio, MUSB_TXCSR); 2688 musb->context.index_regs[i].rxmaxp = 2689 musb_readw(epio, MUSB_RXMAXP); 2690 musb->context.index_regs[i].rxcsr = 2691 musb_readw(epio, MUSB_RXCSR); 2692 2693 if (musb->dyn_fifo) { 2694 musb->context.index_regs[i].txfifoadd = 2695 musb_readw(musb_base, MUSB_TXFIFOADD); 2696 musb->context.index_regs[i].rxfifoadd = 2697 musb_readw(musb_base, MUSB_RXFIFOADD); 2698 musb->context.index_regs[i].txfifosz = 2699 musb_readb(musb_base, MUSB_TXFIFOSZ); 2700 musb->context.index_regs[i].rxfifosz = 2701 musb_readb(musb_base, MUSB_RXFIFOSZ); 2702 } 2703 2704 musb->context.index_regs[i].txtype = 2705 musb_readb(epio, MUSB_TXTYPE); 2706 musb->context.index_regs[i].txinterval = 2707 musb_readb(epio, MUSB_TXINTERVAL); 2708 musb->context.index_regs[i].rxtype = 2709 musb_readb(epio, MUSB_RXTYPE); 2710 musb->context.index_regs[i].rxinterval = 2711 musb_readb(epio, MUSB_RXINTERVAL); 2712 2713 musb->context.index_regs[i].txfunaddr = 2714 musb_read_txfunaddr(musb, i); 2715 musb->context.index_regs[i].txhubaddr = 2716 musb_read_txhubaddr(musb, i); 2717 musb->context.index_regs[i].txhubport = 2718 musb_read_txhubport(musb, i); 2719 2720 musb->context.index_regs[i].rxfunaddr = 2721 musb_read_rxfunaddr(musb, i); 2722 musb->context.index_regs[i].rxhubaddr = 2723 musb_read_rxhubaddr(musb, i); 2724 musb->context.index_regs[i].rxhubport = 2725 musb_read_rxhubport(musb, i); 2726 } 2727 } 2728 2729 static void musb_restore_context(struct musb *musb) 2730 { 2731 int i; 2732 void __iomem *musb_base = musb->mregs; 2733 void __iomem *epio; 2734 u8 power; 2735 2736 musb_writew(musb_base, MUSB_FRAME, musb->context.frame); 2737 musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); 2738 musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl); 2739 2740 /* Don't affect SUSPENDM/RESUME bits in POWER reg */ 2741 power = musb_readb(musb_base, MUSB_POWER); 2742 power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME; 2743 musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME); 2744 power |= musb->context.power; 2745 musb_writeb(musb_base, MUSB_POWER, power); 2746 2747 musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); 2748 musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); 2749 musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); 2750 if (musb->context.devctl & MUSB_DEVCTL_SESSION) 2751 musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); 2752 2753 for (i = 0; i < musb->config->num_eps; ++i) { 2754 struct musb_hw_ep *hw_ep; 2755 2756 hw_ep = &musb->endpoints[i]; 2757 if (!hw_ep) 2758 continue; 2759 2760 epio = hw_ep->regs; 2761 if (!epio) 2762 continue; 2763 2764 musb_writeb(musb_base, MUSB_INDEX, i); 2765 musb_writew(epio, MUSB_TXMAXP, 2766 musb->context.index_regs[i].txmaxp); 2767 musb_writew(epio, MUSB_TXCSR, 2768 musb->context.index_regs[i].txcsr); 2769 musb_writew(epio, MUSB_RXMAXP, 2770 musb->context.index_regs[i].rxmaxp); 2771 musb_writew(epio, MUSB_RXCSR, 2772 musb->context.index_regs[i].rxcsr); 2773 2774 if (musb->dyn_fifo) { 2775 musb_writeb(musb_base, MUSB_TXFIFOSZ, 2776 musb->context.index_regs[i].txfifosz); 2777 musb_writeb(musb_base, MUSB_RXFIFOSZ, 2778 musb->context.index_regs[i].rxfifosz); 2779 musb_writew(musb_base, MUSB_TXFIFOADD, 2780 musb->context.index_regs[i].txfifoadd); 2781 musb_writew(musb_base, MUSB_RXFIFOADD, 2782 musb->context.index_regs[i].rxfifoadd); 2783 } 2784 2785 musb_writeb(epio, MUSB_TXTYPE, 2786 musb->context.index_regs[i].txtype); 2787 musb_writeb(epio, MUSB_TXINTERVAL, 2788 musb->context.index_regs[i].txinterval); 2789 musb_writeb(epio, MUSB_RXTYPE, 2790 musb->context.index_regs[i].rxtype); 2791 musb_writeb(epio, MUSB_RXINTERVAL, 2792 2793 musb->context.index_regs[i].rxinterval); 2794 musb_write_txfunaddr(musb, i, 2795 musb->context.index_regs[i].txfunaddr); 2796 musb_write_txhubaddr(musb, i, 2797 musb->context.index_regs[i].txhubaddr); 2798 musb_write_txhubport(musb, i, 2799 musb->context.index_regs[i].txhubport); 2800 2801 musb_write_rxfunaddr(musb, i, 2802 musb->context.index_regs[i].rxfunaddr); 2803 musb_write_rxhubaddr(musb, i, 2804 musb->context.index_regs[i].rxhubaddr); 2805 musb_write_rxhubport(musb, i, 2806 musb->context.index_regs[i].rxhubport); 2807 } 2808 musb_writeb(musb_base, MUSB_INDEX, musb->context.index); 2809 } 2810 2811 static int musb_suspend(struct device *dev) 2812 { 2813 struct musb *musb = dev_to_musb(dev); 2814 unsigned long flags; 2815 int ret; 2816 2817 ret = pm_runtime_get_sync(dev); 2818 if (ret < 0) { 2819 pm_runtime_put_noidle(dev); 2820 return ret; 2821 } 2822 2823 musb_platform_disable(musb); 2824 musb_disable_interrupts(musb); 2825 2826 musb->flush_irq_work = true; 2827 while (flush_delayed_work(&musb->irq_work)) 2828 ; 2829 musb->flush_irq_work = false; 2830 2831 if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION)) 2832 musb_writeb(musb->mregs, MUSB_DEVCTL, 0); 2833 2834 WARN_ON(!list_empty(&musb->pending_list)); 2835 2836 spin_lock_irqsave(&musb->lock, flags); 2837 2838 if (is_peripheral_active(musb)) { 2839 /* FIXME force disconnect unless we know USB will wake 2840 * the system up quickly enough to respond ... 2841 */ 2842 } else if (is_host_active(musb)) { 2843 /* we know all the children are suspended; sometimes 2844 * they will even be wakeup-enabled. 2845 */ 2846 } 2847 2848 musb_save_context(musb); 2849 2850 spin_unlock_irqrestore(&musb->lock, flags); 2851 return 0; 2852 } 2853 2854 static int musb_resume(struct device *dev) 2855 { 2856 struct musb *musb = dev_to_musb(dev); 2857 unsigned long flags; 2858 int error; 2859 u8 devctl; 2860 u8 mask; 2861 2862 /* 2863 * For static cmos like DaVinci, register values were preserved 2864 * unless for some reason the whole soc powered down or the USB 2865 * module got reset through the PSC (vs just being disabled). 2866 * 2867 * For the DSPS glue layer though, a full register restore has to 2868 * be done. As it shouldn't harm other platforms, we do it 2869 * unconditionally. 2870 */ 2871 2872 musb_restore_context(musb); 2873 2874 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 2875 mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; 2876 if ((devctl & mask) != (musb->context.devctl & mask)) 2877 musb->port1_status = 0; 2878 2879 musb_enable_interrupts(musb); 2880 musb_platform_enable(musb); 2881 2882 /* session might be disabled in suspend */ 2883 if (musb->port_mode == MUSB_HOST && 2884 !(musb->ops->quirks & MUSB_PRESERVE_SESSION)) { 2885 devctl |= MUSB_DEVCTL_SESSION; 2886 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 2887 } 2888 2889 spin_lock_irqsave(&musb->lock, flags); 2890 error = musb_run_resume_work(musb); 2891 if (error) 2892 dev_err(musb->controller, "resume work failed with %i\n", 2893 error); 2894 spin_unlock_irqrestore(&musb->lock, flags); 2895 2896 pm_runtime_mark_last_busy(dev); 2897 pm_runtime_put_autosuspend(dev); 2898 2899 return 0; 2900 } 2901 2902 static int musb_runtime_suspend(struct device *dev) 2903 { 2904 struct musb *musb = dev_to_musb(dev); 2905 2906 musb_save_context(musb); 2907 musb->is_runtime_suspended = 1; 2908 2909 return 0; 2910 } 2911 2912 static int musb_runtime_resume(struct device *dev) 2913 { 2914 struct musb *musb = dev_to_musb(dev); 2915 unsigned long flags; 2916 int error; 2917 2918 /* 2919 * When pm_runtime_get_sync called for the first time in driver 2920 * init, some of the structure is still not initialized which is 2921 * used in restore function. But clock needs to be 2922 * enabled before any register access, so 2923 * pm_runtime_get_sync has to be called. 2924 * Also context restore without save does not make 2925 * any sense 2926 */ 2927 if (!musb->is_initialized) 2928 return 0; 2929 2930 musb_restore_context(musb); 2931 2932 spin_lock_irqsave(&musb->lock, flags); 2933 error = musb_run_resume_work(musb); 2934 if (error) 2935 dev_err(musb->controller, "resume work failed with %i\n", 2936 error); 2937 musb->is_runtime_suspended = 0; 2938 spin_unlock_irqrestore(&musb->lock, flags); 2939 2940 return 0; 2941 } 2942 2943 static const struct dev_pm_ops musb_dev_pm_ops = { 2944 .suspend = musb_suspend, 2945 .resume = musb_resume, 2946 .runtime_suspend = musb_runtime_suspend, 2947 .runtime_resume = musb_runtime_resume, 2948 }; 2949 2950 #define MUSB_DEV_PM_OPS (&musb_dev_pm_ops) 2951 #else 2952 #define MUSB_DEV_PM_OPS NULL 2953 #endif 2954 2955 static struct platform_driver musb_driver = { 2956 .driver = { 2957 .name = musb_driver_name, 2958 .bus = &platform_bus_type, 2959 .pm = MUSB_DEV_PM_OPS, 2960 .dev_groups = musb_groups, 2961 }, 2962 .probe = musb_probe, 2963 .remove = musb_remove, 2964 }; 2965 2966 module_platform_driver(musb_driver); 2967