1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for SMSC USB3503 USB 2.0 hub controller driver 4 * 5 * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/i2c.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/delay.h> 12 #include <linux/slab.h> 13 #include <linux/module.h> 14 #include <linux/platform_device.h> 15 #include <linux/platform_data/usb3503.h> 16 #include <linux/regmap.h> 17 18 #define USB3503_VIDL 0x00 19 #define USB3503_VIDM 0x01 20 #define USB3503_PIDL 0x02 21 #define USB3503_PIDM 0x03 22 #define USB3503_DIDL 0x04 23 #define USB3503_DIDM 0x05 24 25 #define USB3503_CFG1 0x06 26 #define USB3503_SELF_BUS_PWR (1 << 7) 27 28 #define USB3503_CFG2 0x07 29 #define USB3503_CFG3 0x08 30 #define USB3503_NRD 0x09 31 32 #define USB3503_PDS 0x0a 33 34 #define USB3503_SP_ILOCK 0xe7 35 #define USB3503_SPILOCK_CONNECT (1 << 1) 36 #define USB3503_SPILOCK_CONFIG (1 << 0) 37 38 #define USB3503_CFGP 0xee 39 #define USB3503_CLKSUSP (1 << 7) 40 41 #define USB3503_RESET 0xff 42 43 struct usb3503 { 44 enum usb3503_mode mode; 45 struct regmap *regmap; 46 struct device *dev; 47 struct clk *clk; 48 u8 port_off_mask; 49 struct gpio_desc *intn; 50 struct gpio_desc *reset; 51 struct gpio_desc *connect; 52 bool secondary_ref_clk; 53 }; 54 55 static int usb3503_reset(struct usb3503 *hub, int state) 56 { 57 if (!state && hub->connect) 58 gpiod_set_value_cansleep(hub->connect, 0); 59 60 if (hub->reset) 61 gpiod_set_value_cansleep(hub->reset, !state); 62 63 /* Wait T_HUBINIT == 4ms for hub logic to stabilize */ 64 if (state) 65 usleep_range(4000, 10000); 66 67 return 0; 68 } 69 70 static int usb3503_connect(struct usb3503 *hub) 71 { 72 struct device *dev = hub->dev; 73 int err; 74 75 usb3503_reset(hub, 1); 76 77 if (hub->regmap) { 78 /* SP_ILOCK: set connect_n, config_n for config */ 79 err = regmap_write(hub->regmap, USB3503_SP_ILOCK, 80 (USB3503_SPILOCK_CONNECT 81 | USB3503_SPILOCK_CONFIG)); 82 if (err < 0) { 83 dev_err(dev, "SP_ILOCK failed (%d)\n", err); 84 return err; 85 } 86 87 /* PDS : Set the ports which are disabled in self-powered mode. */ 88 if (hub->port_off_mask) { 89 err = regmap_update_bits(hub->regmap, USB3503_PDS, 90 hub->port_off_mask, 91 hub->port_off_mask); 92 if (err < 0) { 93 dev_err(dev, "PDS failed (%d)\n", err); 94 return err; 95 } 96 } 97 98 /* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */ 99 err = regmap_update_bits(hub->regmap, USB3503_CFG1, 100 USB3503_SELF_BUS_PWR, 101 USB3503_SELF_BUS_PWR); 102 if (err < 0) { 103 dev_err(dev, "CFG1 failed (%d)\n", err); 104 return err; 105 } 106 107 /* SP_LOCK: clear connect_n, config_n for hub connect */ 108 err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK, 109 (USB3503_SPILOCK_CONNECT 110 | USB3503_SPILOCK_CONFIG), 0); 111 if (err < 0) { 112 dev_err(dev, "SP_ILOCK failed (%d)\n", err); 113 return err; 114 } 115 } 116 117 if (hub->connect) 118 gpiod_set_value_cansleep(hub->connect, 1); 119 120 hub->mode = USB3503_MODE_HUB; 121 dev_info(dev, "switched to HUB mode\n"); 122 123 return 0; 124 } 125 126 static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode) 127 { 128 struct device *dev = hub->dev; 129 int err = 0; 130 131 switch (mode) { 132 case USB3503_MODE_HUB: 133 err = usb3503_connect(hub); 134 break; 135 136 case USB3503_MODE_STANDBY: 137 usb3503_reset(hub, 0); 138 dev_info(dev, "switched to STANDBY mode\n"); 139 break; 140 141 default: 142 dev_err(dev, "unknown mode is requested\n"); 143 err = -EINVAL; 144 break; 145 } 146 147 return err; 148 } 149 150 static const struct regmap_config usb3503_regmap_config = { 151 .reg_bits = 8, 152 .val_bits = 8, 153 154 .max_register = USB3503_RESET, 155 }; 156 157 static int usb3503_probe(struct usb3503 *hub) 158 { 159 struct device *dev = hub->dev; 160 struct usb3503_platform_data *pdata = dev_get_platdata(dev); 161 struct device_node *np = dev->of_node; 162 int err; 163 bool is_clk_enabled = false; 164 u32 mode = USB3503_MODE_HUB; 165 const u32 *property; 166 enum gpiod_flags flags; 167 int len; 168 169 if (pdata) { 170 hub->port_off_mask = pdata->port_off_mask; 171 hub->mode = pdata->initial_mode; 172 } else if (np) { 173 u32 rate = 0; 174 hub->port_off_mask = 0; 175 176 if (!of_property_read_u32(np, "refclk-frequency", &rate)) { 177 switch (rate) { 178 case 38400000: 179 case 26000000: 180 case 19200000: 181 case 12000000: 182 hub->secondary_ref_clk = 0; 183 break; 184 case 24000000: 185 case 27000000: 186 case 25000000: 187 case 50000000: 188 hub->secondary_ref_clk = 1; 189 break; 190 default: 191 dev_err(dev, 192 "unsupported reference clock rate (%d)\n", 193 (int) rate); 194 return -EINVAL; 195 } 196 } 197 198 hub->clk = devm_clk_get_optional(dev, "refclk"); 199 if (IS_ERR(hub->clk)) { 200 dev_err(dev, "unable to request refclk (%ld)\n", 201 PTR_ERR(hub->clk)); 202 return PTR_ERR(hub->clk); 203 } 204 205 if (rate != 0) { 206 err = clk_set_rate(hub->clk, rate); 207 if (err) { 208 dev_err(dev, 209 "unable to set reference clock rate to %d\n", 210 (int)rate); 211 return err; 212 } 213 } 214 215 err = clk_prepare_enable(hub->clk); 216 if (err) { 217 dev_err(dev, "unable to enable reference clock\n"); 218 return err; 219 } 220 221 is_clk_enabled = true; 222 property = of_get_property(np, "disabled-ports", &len); 223 if (property && (len / sizeof(u32)) > 0) { 224 int i; 225 for (i = 0; i < len / sizeof(u32); i++) { 226 u32 port = be32_to_cpu(property[i]); 227 if ((1 <= port) && (port <= 3)) 228 hub->port_off_mask |= (1 << port); 229 } 230 } 231 232 of_property_read_u32(np, "initial-mode", &mode); 233 hub->mode = mode; 234 } 235 236 if (hub->secondary_ref_clk) 237 flags = GPIOD_OUT_LOW; 238 else 239 flags = GPIOD_OUT_HIGH; 240 hub->intn = devm_gpiod_get_optional(dev, "intn", flags); 241 if (IS_ERR(hub->intn)) { 242 err = PTR_ERR(hub->intn); 243 goto err_clk; 244 } 245 if (hub->intn) 246 gpiod_set_consumer_name(hub->intn, "usb3503 intn"); 247 248 hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); 249 if (IS_ERR(hub->connect)) { 250 err = PTR_ERR(hub->connect); 251 goto err_clk; 252 } 253 if (hub->connect) 254 gpiod_set_consumer_name(hub->connect, "usb3503 connect"); 255 256 hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 257 if (IS_ERR(hub->reset)) { 258 err = PTR_ERR(hub->reset); 259 goto err_clk; 260 } 261 if (hub->reset) { 262 /* Datasheet defines a hardware reset to be at least 100us */ 263 usleep_range(100, 10000); 264 gpiod_set_consumer_name(hub->reset, "usb3503 reset"); 265 } 266 267 if (hub->port_off_mask && !hub->regmap) 268 dev_err(dev, "Ports disabled with no control interface\n"); 269 270 usb3503_switch_mode(hub, hub->mode); 271 272 dev_info(dev, "%s: probed in %s mode\n", __func__, 273 (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); 274 275 return 0; 276 277 err_clk: 278 if (is_clk_enabled) 279 clk_disable_unprepare(hub->clk); 280 return err; 281 } 282 283 static int usb3503_i2c_probe(struct i2c_client *i2c) 284 { 285 struct usb3503 *hub; 286 int err; 287 288 hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL); 289 if (!hub) 290 return -ENOMEM; 291 292 i2c_set_clientdata(i2c, hub); 293 hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config); 294 if (IS_ERR(hub->regmap)) { 295 err = PTR_ERR(hub->regmap); 296 dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err); 297 return err; 298 } 299 hub->dev = &i2c->dev; 300 301 return usb3503_probe(hub); 302 } 303 304 static void usb3503_i2c_remove(struct i2c_client *i2c) 305 { 306 struct usb3503 *hub; 307 308 hub = i2c_get_clientdata(i2c); 309 clk_disable_unprepare(hub->clk); 310 } 311 312 static int usb3503_platform_probe(struct platform_device *pdev) 313 { 314 struct usb3503 *hub; 315 316 hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL); 317 if (!hub) 318 return -ENOMEM; 319 hub->dev = &pdev->dev; 320 platform_set_drvdata(pdev, hub); 321 322 return usb3503_probe(hub); 323 } 324 325 static int usb3503_platform_remove(struct platform_device *pdev) 326 { 327 struct usb3503 *hub; 328 329 hub = platform_get_drvdata(pdev); 330 clk_disable_unprepare(hub->clk); 331 332 return 0; 333 } 334 335 static int __maybe_unused usb3503_suspend(struct usb3503 *hub) 336 { 337 usb3503_switch_mode(hub, USB3503_MODE_STANDBY); 338 clk_disable_unprepare(hub->clk); 339 340 return 0; 341 } 342 343 static int __maybe_unused usb3503_resume(struct usb3503 *hub) 344 { 345 clk_prepare_enable(hub->clk); 346 usb3503_switch_mode(hub, hub->mode); 347 348 return 0; 349 } 350 351 static int __maybe_unused usb3503_i2c_suspend(struct device *dev) 352 { 353 struct i2c_client *client = to_i2c_client(dev); 354 355 return usb3503_suspend(i2c_get_clientdata(client)); 356 } 357 358 static int __maybe_unused usb3503_i2c_resume(struct device *dev) 359 { 360 struct i2c_client *client = to_i2c_client(dev); 361 362 return usb3503_resume(i2c_get_clientdata(client)); 363 } 364 365 static int __maybe_unused usb3503_platform_suspend(struct device *dev) 366 { 367 return usb3503_suspend(dev_get_drvdata(dev)); 368 } 369 370 static int __maybe_unused usb3503_platform_resume(struct device *dev) 371 { 372 return usb3503_resume(dev_get_drvdata(dev)); 373 } 374 375 static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend, 376 usb3503_i2c_resume); 377 378 static SIMPLE_DEV_PM_OPS(usb3503_platform_pm_ops, usb3503_platform_suspend, 379 usb3503_platform_resume); 380 381 static const struct i2c_device_id usb3503_id[] = { 382 { USB3503_I2C_NAME, 0 }, 383 { } 384 }; 385 MODULE_DEVICE_TABLE(i2c, usb3503_id); 386 387 #ifdef CONFIG_OF 388 static const struct of_device_id usb3503_of_match[] = { 389 { .compatible = "smsc,usb3503", }, 390 { .compatible = "smsc,usb3503a", }, 391 {}, 392 }; 393 MODULE_DEVICE_TABLE(of, usb3503_of_match); 394 #endif 395 396 static struct i2c_driver usb3503_i2c_driver = { 397 .driver = { 398 .name = USB3503_I2C_NAME, 399 .pm = pm_ptr(&usb3503_i2c_pm_ops), 400 .of_match_table = of_match_ptr(usb3503_of_match), 401 }, 402 .probe_new = usb3503_i2c_probe, 403 .remove = usb3503_i2c_remove, 404 .id_table = usb3503_id, 405 }; 406 407 static struct platform_driver usb3503_platform_driver = { 408 .driver = { 409 .name = USB3503_I2C_NAME, 410 .of_match_table = of_match_ptr(usb3503_of_match), 411 .pm = pm_ptr(&usb3503_platform_pm_ops), 412 }, 413 .probe = usb3503_platform_probe, 414 .remove = usb3503_platform_remove, 415 }; 416 417 static int __init usb3503_init(void) 418 { 419 int err; 420 421 err = i2c_add_driver(&usb3503_i2c_driver); 422 if (err) { 423 pr_err("usb3503: Failed to register I2C driver: %d\n", err); 424 return err; 425 } 426 427 err = platform_driver_register(&usb3503_platform_driver); 428 if (err) { 429 pr_err("usb3503: Failed to register platform driver: %d\n", 430 err); 431 i2c_del_driver(&usb3503_i2c_driver); 432 return err; 433 } 434 435 return 0; 436 } 437 module_init(usb3503_init); 438 439 static void __exit usb3503_exit(void) 440 { 441 platform_driver_unregister(&usb3503_platform_driver); 442 i2c_del_driver(&usb3503_i2c_driver); 443 } 444 module_exit(usb3503_exit); 445 446 MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>"); 447 MODULE_DESCRIPTION("USB3503 USB HUB driver"); 448 MODULE_LICENSE("GPL"); 449