1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for SMSC USB3503 USB 2.0 hub controller driver 4 * 5 * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/i2c.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/delay.h> 12 #include <linux/slab.h> 13 #include <linux/module.h> 14 #include <linux/platform_device.h> 15 #include <linux/platform_data/usb3503.h> 16 #include <linux/regmap.h> 17 18 #define USB3503_VIDL 0x00 19 #define USB3503_VIDM 0x01 20 #define USB3503_PIDL 0x02 21 #define USB3503_PIDM 0x03 22 #define USB3503_DIDL 0x04 23 #define USB3503_DIDM 0x05 24 25 #define USB3503_CFG1 0x06 26 #define USB3503_SELF_BUS_PWR (1 << 7) 27 28 #define USB3503_CFG2 0x07 29 #define USB3503_CFG3 0x08 30 #define USB3503_NRD 0x09 31 32 #define USB3503_PDS 0x0a 33 34 #define USB3503_SP_ILOCK 0xe7 35 #define USB3503_SPILOCK_CONNECT (1 << 1) 36 #define USB3503_SPILOCK_CONFIG (1 << 0) 37 38 #define USB3503_CFGP 0xee 39 #define USB3503_CLKSUSP (1 << 7) 40 41 #define USB3503_RESET 0xff 42 43 struct usb3503 { 44 enum usb3503_mode mode; 45 struct regmap *regmap; 46 struct device *dev; 47 struct clk *clk; 48 u8 port_off_mask; 49 struct gpio_desc *bypass; 50 struct gpio_desc *intn; 51 struct gpio_desc *reset; 52 struct gpio_desc *connect; 53 bool secondary_ref_clk; 54 }; 55 56 static int usb3503_connect(struct usb3503 *hub) 57 { 58 struct device *dev = hub->dev; 59 int err; 60 61 if (hub->regmap) { 62 /* SP_ILOCK: set connect_n, config_n for config */ 63 err = regmap_write(hub->regmap, USB3503_SP_ILOCK, 64 (USB3503_SPILOCK_CONNECT 65 | USB3503_SPILOCK_CONFIG)); 66 if (err < 0) { 67 dev_err(dev, "SP_ILOCK failed (%d)\n", err); 68 return err; 69 } 70 71 /* PDS : Set the ports which are disabled in self-powered mode. */ 72 if (hub->port_off_mask) { 73 err = regmap_update_bits(hub->regmap, USB3503_PDS, 74 hub->port_off_mask, 75 hub->port_off_mask); 76 if (err < 0) { 77 dev_err(dev, "PDS failed (%d)\n", err); 78 return err; 79 } 80 } 81 82 /* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */ 83 err = regmap_update_bits(hub->regmap, USB3503_CFG1, 84 USB3503_SELF_BUS_PWR, 85 USB3503_SELF_BUS_PWR); 86 if (err < 0) { 87 dev_err(dev, "CFG1 failed (%d)\n", err); 88 return err; 89 } 90 91 /* SP_LOCK: clear connect_n, config_n for hub connect */ 92 err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK, 93 (USB3503_SPILOCK_CONNECT 94 | USB3503_SPILOCK_CONFIG), 0); 95 if (err < 0) { 96 dev_err(dev, "SP_ILOCK failed (%d)\n", err); 97 return err; 98 } 99 } 100 101 if (hub->connect) 102 gpiod_set_value_cansleep(hub->connect, 1); 103 104 hub->mode = USB3503_MODE_HUB; 105 dev_info(dev, "switched to HUB mode\n"); 106 107 return 0; 108 } 109 110 static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode) 111 { 112 struct device *dev = hub->dev; 113 int rst, bypass, conn; 114 115 switch (mode) { 116 case USB3503_MODE_HUB: 117 conn = 1; 118 rst = 0; 119 bypass = 0; 120 break; 121 case USB3503_MODE_STANDBY: 122 conn = 0; 123 rst = 1; 124 bypass = 1; 125 dev_info(dev, "switched to STANDBY mode\n"); 126 break; 127 case USB3503_MODE_BYPASS: 128 conn = 0; 129 rst = 0; 130 bypass = 1; 131 break; 132 default: 133 dev_err(dev, "unknown mode is requested\n"); 134 return -EINVAL; 135 } 136 137 if (!conn && hub->connect) 138 gpiod_set_value_cansleep(hub->connect, 0); 139 140 if (hub->reset) 141 gpiod_set_value_cansleep(hub->reset, rst); 142 143 if (hub->bypass) 144 gpiod_set_value_cansleep(hub->bypass, bypass); 145 146 if (conn) { 147 /* Wait T_HUBINIT == 4ms for hub logic to stabilize */ 148 usleep_range(4000, 10000); 149 return usb3503_connect(hub); 150 } 151 152 return 0; 153 } 154 155 static const struct regmap_config usb3503_regmap_config = { 156 .reg_bits = 8, 157 .val_bits = 8, 158 159 .max_register = USB3503_RESET, 160 }; 161 162 static int usb3503_probe(struct usb3503 *hub) 163 { 164 struct device *dev = hub->dev; 165 struct usb3503_platform_data *pdata = dev_get_platdata(dev); 166 struct device_node *np = dev->of_node; 167 int err; 168 bool is_clk_enabled = false; 169 u32 mode = USB3503_MODE_HUB; 170 const u32 *property; 171 enum gpiod_flags flags; 172 int len; 173 174 if (pdata) { 175 hub->port_off_mask = pdata->port_off_mask; 176 hub->mode = pdata->initial_mode; 177 } else if (np) { 178 u32 rate = 0; 179 hub->port_off_mask = 0; 180 181 if (!of_property_read_u32(np, "refclk-frequency", &rate)) { 182 switch (rate) { 183 case 38400000: 184 case 26000000: 185 case 19200000: 186 case 12000000: 187 hub->secondary_ref_clk = 0; 188 break; 189 case 24000000: 190 case 27000000: 191 case 25000000: 192 case 50000000: 193 hub->secondary_ref_clk = 1; 194 break; 195 default: 196 dev_err(dev, 197 "unsupported reference clock rate (%d)\n", 198 (int) rate); 199 return -EINVAL; 200 } 201 } 202 203 hub->clk = devm_clk_get_optional(dev, "refclk"); 204 if (IS_ERR(hub->clk)) { 205 dev_err(dev, "unable to request refclk (%ld)\n", 206 PTR_ERR(hub->clk)); 207 return PTR_ERR(hub->clk); 208 } 209 210 if (rate != 0) { 211 err = clk_set_rate(hub->clk, rate); 212 if (err) { 213 dev_err(dev, 214 "unable to set reference clock rate to %d\n", 215 (int)rate); 216 return err; 217 } 218 } 219 220 err = clk_prepare_enable(hub->clk); 221 if (err) { 222 dev_err(dev, "unable to enable reference clock\n"); 223 return err; 224 } 225 226 is_clk_enabled = true; 227 property = of_get_property(np, "disabled-ports", &len); 228 if (property && (len / sizeof(u32)) > 0) { 229 int i; 230 for (i = 0; i < len / sizeof(u32); i++) { 231 u32 port = be32_to_cpu(property[i]); 232 if ((1 <= port) && (port <= 3)) 233 hub->port_off_mask |= (1 << port); 234 } 235 } 236 237 of_property_read_u32(np, "initial-mode", &mode); 238 hub->mode = mode; 239 } 240 241 if (hub->secondary_ref_clk) 242 flags = GPIOD_OUT_LOW; 243 else 244 flags = GPIOD_OUT_HIGH; 245 hub->intn = devm_gpiod_get_optional(dev, "intn", flags); 246 if (IS_ERR(hub->intn)) { 247 err = PTR_ERR(hub->intn); 248 goto err_clk; 249 } 250 if (hub->intn) 251 gpiod_set_consumer_name(hub->intn, "usb3503 intn"); 252 253 hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); 254 if (IS_ERR(hub->connect)) { 255 err = PTR_ERR(hub->connect); 256 goto err_clk; 257 } 258 if (hub->connect) 259 gpiod_set_consumer_name(hub->connect, "usb3503 connect"); 260 261 hub->bypass = devm_gpiod_get_optional(dev, "bypass", GPIOD_OUT_HIGH); 262 if (IS_ERR(hub->bypass)) { 263 err = PTR_ERR(hub->bypass); 264 goto err_clk; 265 } 266 if (hub->bypass) 267 gpiod_set_consumer_name(hub->bypass, "usb3503 bypass"); 268 269 hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 270 if (IS_ERR(hub->reset)) { 271 err = PTR_ERR(hub->reset); 272 goto err_clk; 273 } 274 if (hub->reset) { 275 /* Datasheet defines a hardware reset to be at least 100us */ 276 usleep_range(100, 10000); 277 gpiod_set_consumer_name(hub->reset, "usb3503 reset"); 278 } 279 280 if (hub->port_off_mask && !hub->regmap) 281 dev_err(dev, "Ports disabled with no control interface\n"); 282 283 usb3503_switch_mode(hub, hub->mode); 284 285 dev_info(dev, "%s: probed in %s mode\n", __func__, 286 (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); 287 288 return 0; 289 290 err_clk: 291 if (is_clk_enabled) 292 clk_disable_unprepare(hub->clk); 293 return err; 294 } 295 296 static int usb3503_i2c_probe(struct i2c_client *i2c) 297 { 298 struct usb3503 *hub; 299 int err; 300 301 hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL); 302 if (!hub) 303 return -ENOMEM; 304 305 i2c_set_clientdata(i2c, hub); 306 hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config); 307 if (IS_ERR(hub->regmap)) { 308 err = PTR_ERR(hub->regmap); 309 dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err); 310 return err; 311 } 312 hub->dev = &i2c->dev; 313 314 return usb3503_probe(hub); 315 } 316 317 static void usb3503_i2c_remove(struct i2c_client *i2c) 318 { 319 struct usb3503 *hub; 320 321 hub = i2c_get_clientdata(i2c); 322 clk_disable_unprepare(hub->clk); 323 } 324 325 static int usb3503_platform_probe(struct platform_device *pdev) 326 { 327 struct usb3503 *hub; 328 329 hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL); 330 if (!hub) 331 return -ENOMEM; 332 hub->dev = &pdev->dev; 333 platform_set_drvdata(pdev, hub); 334 335 return usb3503_probe(hub); 336 } 337 338 static void usb3503_platform_remove(struct platform_device *pdev) 339 { 340 struct usb3503 *hub; 341 342 hub = platform_get_drvdata(pdev); 343 clk_disable_unprepare(hub->clk); 344 } 345 346 static int __maybe_unused usb3503_suspend(struct usb3503 *hub) 347 { 348 usb3503_switch_mode(hub, USB3503_MODE_STANDBY); 349 clk_disable_unprepare(hub->clk); 350 351 return 0; 352 } 353 354 static int __maybe_unused usb3503_resume(struct usb3503 *hub) 355 { 356 clk_prepare_enable(hub->clk); 357 usb3503_switch_mode(hub, hub->mode); 358 359 return 0; 360 } 361 362 static int __maybe_unused usb3503_i2c_suspend(struct device *dev) 363 { 364 struct i2c_client *client = to_i2c_client(dev); 365 366 return usb3503_suspend(i2c_get_clientdata(client)); 367 } 368 369 static int __maybe_unused usb3503_i2c_resume(struct device *dev) 370 { 371 struct i2c_client *client = to_i2c_client(dev); 372 373 return usb3503_resume(i2c_get_clientdata(client)); 374 } 375 376 static int __maybe_unused usb3503_platform_suspend(struct device *dev) 377 { 378 return usb3503_suspend(dev_get_drvdata(dev)); 379 } 380 381 static int __maybe_unused usb3503_platform_resume(struct device *dev) 382 { 383 return usb3503_resume(dev_get_drvdata(dev)); 384 } 385 386 static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend, 387 usb3503_i2c_resume); 388 389 static SIMPLE_DEV_PM_OPS(usb3503_platform_pm_ops, usb3503_platform_suspend, 390 usb3503_platform_resume); 391 392 static const struct i2c_device_id usb3503_id[] = { 393 { USB3503_I2C_NAME }, 394 { } 395 }; 396 MODULE_DEVICE_TABLE(i2c, usb3503_id); 397 398 #ifdef CONFIG_OF 399 static const struct of_device_id usb3503_of_match[] = { 400 { .compatible = "smsc,usb3503", }, 401 { .compatible = "smsc,usb3503a", }, 402 { .compatible = "smsc,usb3803", }, 403 {}, 404 }; 405 MODULE_DEVICE_TABLE(of, usb3503_of_match); 406 #endif 407 408 static struct i2c_driver usb3503_i2c_driver = { 409 .driver = { 410 .name = USB3503_I2C_NAME, 411 .pm = pm_ptr(&usb3503_i2c_pm_ops), 412 .of_match_table = of_match_ptr(usb3503_of_match), 413 }, 414 .probe = usb3503_i2c_probe, 415 .remove = usb3503_i2c_remove, 416 .id_table = usb3503_id, 417 }; 418 419 static struct platform_driver usb3503_platform_driver = { 420 .driver = { 421 .name = USB3503_I2C_NAME, 422 .of_match_table = of_match_ptr(usb3503_of_match), 423 .pm = pm_ptr(&usb3503_platform_pm_ops), 424 }, 425 .probe = usb3503_platform_probe, 426 .remove_new = usb3503_platform_remove, 427 }; 428 429 static int __init usb3503_init(void) 430 { 431 int err; 432 433 err = i2c_add_driver(&usb3503_i2c_driver); 434 if (err) { 435 pr_err("usb3503: Failed to register I2C driver: %d\n", err); 436 return err; 437 } 438 439 err = platform_driver_register(&usb3503_platform_driver); 440 if (err) { 441 pr_err("usb3503: Failed to register platform driver: %d\n", 442 err); 443 i2c_del_driver(&usb3503_i2c_driver); 444 return err; 445 } 446 447 return 0; 448 } 449 module_init(usb3503_init); 450 451 static void __exit usb3503_exit(void) 452 { 453 platform_driver_unregister(&usb3503_platform_driver); 454 i2c_del_driver(&usb3503_i2c_driver); 455 } 456 module_exit(usb3503_exit); 457 458 MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>"); 459 MODULE_DESCRIPTION("USB3503 USB HUB driver"); 460 MODULE_LICENSE("GPL"); 461