1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller 4 * Configuration via SMBus. 5 * 6 * Copyright (c) 2017 SKIDATA AG 7 * 8 * This work is based on the USB3503 driver by Dongjin Kim and 9 * a not-accepted patch by Fabien Lahoudere, see: 10 * https://patchwork.kernel.org/patch/9257715/ 11 */ 12 13 #include <linux/delay.h> 14 #include <linux/gpio/consumer.h> 15 #include <linux/gpio/driver.h> 16 #include <linux/i2c.h> 17 #include <linux/module.h> 18 #include <linux/nls.h> 19 #include <linux/of_device.h> 20 #include <linux/regulator/consumer.h> 21 #include <linux/slab.h> 22 23 /* Internal Register Set Addresses & Default Values acc. to DS00001692C */ 24 #define USB251XB_ADDR_VENDOR_ID_LSB 0x00 25 #define USB251XB_ADDR_VENDOR_ID_MSB 0x01 26 #define USB251XB_DEF_VENDOR_ID 0x0424 27 28 #define USB251XB_ADDR_PRODUCT_ID_LSB 0x02 29 #define USB251XB_ADDR_PRODUCT_ID_MSB 0x03 30 31 #define USB251XB_ADDR_DEVICE_ID_LSB 0x04 32 #define USB251XB_ADDR_DEVICE_ID_MSB 0x05 33 #define USB251XB_DEF_DEVICE_ID 0x0BB3 34 35 #define USB251XB_ADDR_CONFIG_DATA_1 0x06 36 #define USB251XB_DEF_CONFIG_DATA_1 0x9B 37 #define USB251XB_ADDR_CONFIG_DATA_2 0x07 38 #define USB251XB_DEF_CONFIG_DATA_2 0x20 39 #define USB251XB_ADDR_CONFIG_DATA_3 0x08 40 #define USB251XB_DEF_CONFIG_DATA_3 0x02 41 42 #define USB251XB_ADDR_NON_REMOVABLE_DEVICES 0x09 43 #define USB251XB_DEF_NON_REMOVABLE_DEVICES 0x00 44 45 #define USB251XB_ADDR_PORT_DISABLE_SELF 0x0A 46 #define USB251XB_DEF_PORT_DISABLE_SELF 0x00 47 #define USB251XB_ADDR_PORT_DISABLE_BUS 0x0B 48 #define USB251XB_DEF_PORT_DISABLE_BUS 0x00 49 50 #define USB251XB_ADDR_MAX_POWER_SELF 0x0C 51 #define USB251XB_DEF_MAX_POWER_SELF 0x01 52 #define USB251XB_ADDR_MAX_POWER_BUS 0x0D 53 #define USB251XB_DEF_MAX_POWER_BUS 0x32 54 55 #define USB251XB_ADDR_MAX_CURRENT_SELF 0x0E 56 #define USB251XB_DEF_MAX_CURRENT_SELF 0x01 57 #define USB251XB_ADDR_MAX_CURRENT_BUS 0x0F 58 #define USB251XB_DEF_MAX_CURRENT_BUS 0x32 59 60 #define USB251XB_ADDR_POWER_ON_TIME 0x10 61 #define USB251XB_DEF_POWER_ON_TIME 0x32 62 63 #define USB251XB_ADDR_LANGUAGE_ID_HIGH 0x11 64 #define USB251XB_ADDR_LANGUAGE_ID_LOW 0x12 65 #define USB251XB_DEF_LANGUAGE_ID 0x0000 66 67 #define USB251XB_STRING_BUFSIZE 62 68 #define USB251XB_ADDR_MANUFACTURER_STRING_LEN 0x13 69 #define USB251XB_ADDR_MANUFACTURER_STRING 0x16 70 #define USB251XB_DEF_MANUFACTURER_STRING "Microchip" 71 72 #define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14 73 #define USB251XB_ADDR_PRODUCT_STRING 0x54 74 75 #define USB251XB_ADDR_SERIAL_STRING_LEN 0x15 76 #define USB251XB_ADDR_SERIAL_STRING 0x92 77 #define USB251XB_DEF_SERIAL_STRING "" 78 79 #define USB251XB_ADDR_BATTERY_CHARGING_ENABLE 0xD0 80 #define USB251XB_DEF_BATTERY_CHARGING_ENABLE 0x00 81 82 #define USB251XB_ADDR_BOOST_UP 0xF6 83 #define USB251XB_DEF_BOOST_UP 0x00 84 #define USB251XB_ADDR_BOOST_57 0xF7 85 #define USB251XB_DEF_BOOST_57 0x00 86 #define USB251XB_ADDR_BOOST_14 0xF8 87 #define USB251XB_DEF_BOOST_14 0x00 88 89 #define USB251XB_ADDR_PORT_SWAP 0xFA 90 #define USB251XB_DEF_PORT_SWAP 0x00 91 92 #define USB251XB_ADDR_PORT_MAP_12 0xFB 93 #define USB251XB_DEF_PORT_MAP_12 0x00 94 #define USB251XB_ADDR_PORT_MAP_34 0xFC 95 #define USB251XB_DEF_PORT_MAP_34 0x00 /* USB251{3B/i,4B/i,7/i} only */ 96 #define USB251XB_ADDR_PORT_MAP_56 0xFD 97 #define USB251XB_DEF_PORT_MAP_56 0x00 /* USB2517/i only */ 98 #define USB251XB_ADDR_PORT_MAP_7 0xFE 99 #define USB251XB_DEF_PORT_MAP_7 0x00 /* USB2517/i only */ 100 101 #define USB251XB_ADDR_STATUS_COMMAND 0xFF 102 #define USB251XB_STATUS_COMMAND_SMBUS_DOWN 0x04 103 #define USB251XB_STATUS_COMMAND_RESET 0x02 104 #define USB251XB_STATUS_COMMAND_ATTACH 0x01 105 106 #define USB251XB_I2C_REG_SZ 0x100 107 #define USB251XB_I2C_WRITE_SZ 0x10 108 109 #define DRIVER_NAME "usb251xb" 110 #define DRIVER_DESC "Microchip USB 2.0 Hi-Speed Hub Controller" 111 112 struct usb251xb { 113 struct device *dev; 114 struct i2c_client *i2c; 115 struct regulator *vdd; 116 u8 skip_config; 117 struct gpio_desc *gpio_reset; 118 u16 vendor_id; 119 u16 product_id; 120 u16 device_id; 121 u8 conf_data1; 122 u8 conf_data2; 123 u8 conf_data3; 124 u8 non_rem_dev; 125 u8 port_disable_sp; 126 u8 port_disable_bp; 127 u8 max_power_sp; 128 u8 max_power_bp; 129 u8 max_current_sp; 130 u8 max_current_bp; 131 u8 power_on_time; 132 u16 lang_id; 133 u8 manufacturer_len; 134 u8 product_len; 135 u8 serial_len; 136 char manufacturer[USB251XB_STRING_BUFSIZE]; 137 char product[USB251XB_STRING_BUFSIZE]; 138 char serial[USB251XB_STRING_BUFSIZE]; 139 u8 bat_charge_en; 140 u8 boost_up; 141 u8 boost_57; 142 u8 boost_14; 143 u8 port_swap; 144 u8 port_map12; 145 u8 port_map34; 146 u8 port_map56; 147 u8 port_map7; 148 u8 status; 149 }; 150 151 struct usb251xb_data { 152 u16 product_id; 153 u8 port_cnt; 154 bool led_support; 155 bool bat_support; 156 char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */ 157 }; 158 159 static const struct usb251xb_data usb2422_data = { 160 .product_id = 0x2422, 161 .port_cnt = 2, 162 .led_support = false, 163 .bat_support = true, 164 .product_str = "USB2422", 165 }; 166 167 static const struct usb251xb_data usb2512b_data = { 168 .product_id = 0x2512, 169 .port_cnt = 2, 170 .led_support = false, 171 .bat_support = true, 172 .product_str = "USB2512B", 173 }; 174 175 static const struct usb251xb_data usb2512bi_data = { 176 .product_id = 0x2512, 177 .port_cnt = 2, 178 .led_support = false, 179 .bat_support = true, 180 .product_str = "USB2512Bi", 181 }; 182 183 static const struct usb251xb_data usb2513b_data = { 184 .product_id = 0x2513, 185 .port_cnt = 3, 186 .led_support = false, 187 .bat_support = true, 188 .product_str = "USB2513B", 189 }; 190 191 static const struct usb251xb_data usb2513bi_data = { 192 .product_id = 0x2513, 193 .port_cnt = 3, 194 .led_support = false, 195 .bat_support = true, 196 .product_str = "USB2513Bi", 197 }; 198 199 static const struct usb251xb_data usb2514b_data = { 200 .product_id = 0x2514, 201 .port_cnt = 4, 202 .led_support = false, 203 .bat_support = true, 204 .product_str = "USB2514B", 205 }; 206 207 static const struct usb251xb_data usb2514bi_data = { 208 .product_id = 0x2514, 209 .port_cnt = 4, 210 .led_support = false, 211 .bat_support = true, 212 .product_str = "USB2514Bi", 213 }; 214 215 static const struct usb251xb_data usb2517_data = { 216 .product_id = 0x2517, 217 .port_cnt = 7, 218 .led_support = true, 219 .bat_support = false, 220 .product_str = "USB2517", 221 }; 222 223 static const struct usb251xb_data usb2517i_data = { 224 .product_id = 0x2517, 225 .port_cnt = 7, 226 .led_support = true, 227 .bat_support = false, 228 .product_str = "USB2517i", 229 }; 230 231 #ifdef CONFIG_GPIOLIB 232 static int usb251xb_check_dev_children(struct device *dev, void *child) 233 { 234 if (dev->type == &i2c_adapter_type) { 235 return device_for_each_child(dev, child, 236 usb251xb_check_dev_children); 237 } 238 239 return (dev == child); 240 } 241 242 static int usb251x_check_gpio_chip(struct usb251xb *hub) 243 { 244 struct gpio_chip *gc = gpiod_to_chip(hub->gpio_reset); 245 struct i2c_adapter *adap = hub->i2c->adapter; 246 int ret; 247 248 if (!hub->gpio_reset) 249 return 0; 250 251 if (!gc) 252 return -EINVAL; 253 254 ret = usb251xb_check_dev_children(&adap->dev, gc->parent); 255 if (ret) { 256 dev_err(hub->dev, "Reset GPIO chip is at the same i2c-bus\n"); 257 return -EINVAL; 258 } 259 260 return 0; 261 } 262 #else 263 static int usb251x_check_gpio_chip(struct usb251xb *hub) 264 { 265 return 0; 266 } 267 #endif 268 269 static void usb251xb_reset(struct usb251xb *hub) 270 { 271 if (!hub->gpio_reset) 272 return; 273 274 i2c_lock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT); 275 276 gpiod_set_value_cansleep(hub->gpio_reset, 1); 277 usleep_range(1, 10); /* >=1us RESET_N asserted */ 278 gpiod_set_value_cansleep(hub->gpio_reset, 0); 279 280 /* wait for hub recovery/stabilization */ 281 usleep_range(500, 750); /* >=500us after RESET_N deasserted */ 282 283 i2c_unlock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT); 284 } 285 286 static int usb251xb_connect(struct usb251xb *hub) 287 { 288 struct device *dev = hub->dev; 289 int err, i; 290 char i2c_wb[USB251XB_I2C_REG_SZ]; 291 292 memset(i2c_wb, 0, USB251XB_I2C_REG_SZ); 293 294 if (hub->skip_config) { 295 dev_info(dev, "Skip hub configuration, only attach.\n"); 296 i2c_wb[0] = 0x01; 297 i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH; 298 299 usb251xb_reset(hub); 300 301 err = i2c_smbus_write_i2c_block_data(hub->i2c, 302 USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb); 303 if (err) { 304 dev_err(dev, "attaching hub failed: %d\n", err); 305 return err; 306 } 307 return 0; 308 } 309 310 i2c_wb[USB251XB_ADDR_VENDOR_ID_MSB] = (hub->vendor_id >> 8) & 0xFF; 311 i2c_wb[USB251XB_ADDR_VENDOR_ID_LSB] = hub->vendor_id & 0xFF; 312 i2c_wb[USB251XB_ADDR_PRODUCT_ID_MSB] = (hub->product_id >> 8) & 0xFF; 313 i2c_wb[USB251XB_ADDR_PRODUCT_ID_LSB] = hub->product_id & 0xFF; 314 i2c_wb[USB251XB_ADDR_DEVICE_ID_MSB] = (hub->device_id >> 8) & 0xFF; 315 i2c_wb[USB251XB_ADDR_DEVICE_ID_LSB] = hub->device_id & 0xFF; 316 i2c_wb[USB251XB_ADDR_CONFIG_DATA_1] = hub->conf_data1; 317 i2c_wb[USB251XB_ADDR_CONFIG_DATA_2] = hub->conf_data2; 318 i2c_wb[USB251XB_ADDR_CONFIG_DATA_3] = hub->conf_data3; 319 i2c_wb[USB251XB_ADDR_NON_REMOVABLE_DEVICES] = hub->non_rem_dev; 320 i2c_wb[USB251XB_ADDR_PORT_DISABLE_SELF] = hub->port_disable_sp; 321 i2c_wb[USB251XB_ADDR_PORT_DISABLE_BUS] = hub->port_disable_bp; 322 i2c_wb[USB251XB_ADDR_MAX_POWER_SELF] = hub->max_power_sp; 323 i2c_wb[USB251XB_ADDR_MAX_POWER_BUS] = hub->max_power_bp; 324 i2c_wb[USB251XB_ADDR_MAX_CURRENT_SELF] = hub->max_current_sp; 325 i2c_wb[USB251XB_ADDR_MAX_CURRENT_BUS] = hub->max_current_bp; 326 i2c_wb[USB251XB_ADDR_POWER_ON_TIME] = hub->power_on_time; 327 i2c_wb[USB251XB_ADDR_LANGUAGE_ID_HIGH] = (hub->lang_id >> 8) & 0xFF; 328 i2c_wb[USB251XB_ADDR_LANGUAGE_ID_LOW] = hub->lang_id & 0xFF; 329 i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING_LEN] = hub->manufacturer_len; 330 i2c_wb[USB251XB_ADDR_PRODUCT_STRING_LEN] = hub->product_len; 331 i2c_wb[USB251XB_ADDR_SERIAL_STRING_LEN] = hub->serial_len; 332 memcpy(&i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING], hub->manufacturer, 333 USB251XB_STRING_BUFSIZE); 334 memcpy(&i2c_wb[USB251XB_ADDR_SERIAL_STRING], hub->serial, 335 USB251XB_STRING_BUFSIZE); 336 memcpy(&i2c_wb[USB251XB_ADDR_PRODUCT_STRING], hub->product, 337 USB251XB_STRING_BUFSIZE); 338 i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en; 339 i2c_wb[USB251XB_ADDR_BOOST_UP] = hub->boost_up; 340 i2c_wb[USB251XB_ADDR_BOOST_57] = hub->boost_57; 341 i2c_wb[USB251XB_ADDR_BOOST_14] = hub->boost_14; 342 i2c_wb[USB251XB_ADDR_PORT_SWAP] = hub->port_swap; 343 i2c_wb[USB251XB_ADDR_PORT_MAP_12] = hub->port_map12; 344 i2c_wb[USB251XB_ADDR_PORT_MAP_34] = hub->port_map34; 345 i2c_wb[USB251XB_ADDR_PORT_MAP_56] = hub->port_map56; 346 i2c_wb[USB251XB_ADDR_PORT_MAP_7] = hub->port_map7; 347 i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH; 348 349 usb251xb_reset(hub); 350 351 /* write registers */ 352 for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) { 353 int offset = i * USB251XB_I2C_WRITE_SZ; 354 char wbuf[USB251XB_I2C_WRITE_SZ + 1]; 355 356 /* The first data byte transferred tells the hub how many data 357 * bytes will follow (byte count). 358 */ 359 wbuf[0] = USB251XB_I2C_WRITE_SZ; 360 memcpy(&wbuf[1], &i2c_wb[offset], USB251XB_I2C_WRITE_SZ); 361 362 dev_dbg(dev, "writing %d byte block %d to 0x%02X\n", 363 USB251XB_I2C_WRITE_SZ, i, offset); 364 365 err = i2c_smbus_write_i2c_block_data(hub->i2c, offset, 366 USB251XB_I2C_WRITE_SZ + 1, 367 wbuf); 368 if (err) 369 goto out_err; 370 } 371 372 dev_info(dev, "Hub configuration was successful.\n"); 373 return 0; 374 375 out_err: 376 dev_err(dev, "configuring block %d failed: %d\n", i, err); 377 return err; 378 } 379 380 #ifdef CONFIG_OF 381 static void usb251xb_get_ports_field(struct usb251xb *hub, 382 const char *prop_name, u8 port_cnt, 383 bool ds_only, u8 *fld) 384 { 385 struct device *dev = hub->dev; 386 struct property *prop; 387 const __be32 *p; 388 u32 port; 389 390 of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) { 391 if ((port >= ds_only ? 1 : 0) && (port <= port_cnt)) 392 *fld |= BIT(port); 393 else 394 dev_warn(dev, "port %u doesn't exist\n", port); 395 } 396 } 397 398 static int usb251xb_get_ofdata(struct usb251xb *hub, 399 const struct usb251xb_data *data) 400 { 401 struct device *dev = hub->dev; 402 struct device_node *np = dev->of_node; 403 int len; 404 u32 property_u32 = 0; 405 const char *cproperty_char; 406 char str[USB251XB_STRING_BUFSIZE / 2]; 407 408 if (!np) { 409 dev_err(dev, "failed to get ofdata\n"); 410 return -ENODEV; 411 } 412 413 if (of_get_property(np, "skip-config", NULL)) 414 hub->skip_config = 1; 415 else 416 hub->skip_config = 0; 417 418 hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 419 if (IS_ERR(hub->gpio_reset)) 420 return dev_err_probe(dev, PTR_ERR(hub->gpio_reset), 421 "unable to request GPIO reset pin\n"); 422 423 if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1)) 424 hub->vendor_id = USB251XB_DEF_VENDOR_ID; 425 426 if (of_property_read_u16_array(np, "product-id", 427 &hub->product_id, 1)) 428 hub->product_id = data->product_id; 429 430 if (of_property_read_u16_array(np, "device-id", &hub->device_id, 1)) 431 hub->device_id = USB251XB_DEF_DEVICE_ID; 432 433 hub->conf_data1 = USB251XB_DEF_CONFIG_DATA_1; 434 if (of_get_property(np, "self-powered", NULL)) { 435 hub->conf_data1 |= BIT(7); 436 437 /* Configure Over-Current sens when self-powered */ 438 hub->conf_data1 &= ~BIT(2); 439 if (of_get_property(np, "ganged-sensing", NULL)) 440 hub->conf_data1 &= ~BIT(1); 441 else if (of_get_property(np, "individual-sensing", NULL)) 442 hub->conf_data1 |= BIT(1); 443 } else if (of_get_property(np, "bus-powered", NULL)) { 444 hub->conf_data1 &= ~BIT(7); 445 446 /* Disable Over-Current sense when bus-powered */ 447 hub->conf_data1 |= BIT(2); 448 } 449 450 if (of_get_property(np, "disable-hi-speed", NULL)) 451 hub->conf_data1 |= BIT(5); 452 453 if (of_get_property(np, "multi-tt", NULL)) 454 hub->conf_data1 |= BIT(4); 455 else if (of_get_property(np, "single-tt", NULL)) 456 hub->conf_data1 &= ~BIT(4); 457 458 if (of_get_property(np, "disable-eop", NULL)) 459 hub->conf_data1 |= BIT(3); 460 461 if (of_get_property(np, "individual-port-switching", NULL)) 462 hub->conf_data1 |= BIT(0); 463 else if (of_get_property(np, "ganged-port-switching", NULL)) 464 hub->conf_data1 &= ~BIT(0); 465 466 hub->conf_data2 = USB251XB_DEF_CONFIG_DATA_2; 467 if (of_get_property(np, "dynamic-power-switching", NULL)) 468 hub->conf_data2 |= BIT(7); 469 470 if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) { 471 if (property_u32 == 100) { 472 /* 100 us*/ 473 hub->conf_data2 &= ~BIT(5); 474 hub->conf_data2 &= ~BIT(4); 475 } else if (property_u32 == 4000) { 476 /* 4 ms */ 477 hub->conf_data2 &= ~BIT(5); 478 hub->conf_data2 |= BIT(4); 479 } else if (property_u32 == 16000) { 480 /* 16 ms */ 481 hub->conf_data2 |= BIT(5); 482 hub->conf_data2 |= BIT(4); 483 } else { 484 /* 8 ms (DEFAULT) */ 485 hub->conf_data2 |= BIT(5); 486 hub->conf_data2 &= ~BIT(4); 487 } 488 } 489 490 if (of_get_property(np, "compound-device", NULL)) 491 hub->conf_data2 |= BIT(3); 492 493 hub->conf_data3 = USB251XB_DEF_CONFIG_DATA_3; 494 if (of_get_property(np, "port-mapping-mode", NULL)) 495 hub->conf_data3 |= BIT(3); 496 497 if (data->led_support && of_get_property(np, "led-usb-mode", NULL)) 498 hub->conf_data3 &= ~BIT(1); 499 500 if (of_get_property(np, "string-support", NULL)) 501 hub->conf_data3 |= BIT(0); 502 503 hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES; 504 usb251xb_get_ports_field(hub, "non-removable-ports", data->port_cnt, 505 true, &hub->non_rem_dev); 506 507 hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF; 508 usb251xb_get_ports_field(hub, "sp-disabled-ports", data->port_cnt, 509 true, &hub->port_disable_sp); 510 511 hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS; 512 usb251xb_get_ports_field(hub, "bp-disabled-ports", data->port_cnt, 513 true, &hub->port_disable_bp); 514 515 hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF; 516 if (!of_property_read_u32(np, "sp-max-total-current-microamp", 517 &property_u32)) 518 hub->max_power_sp = min_t(u8, property_u32 / 2000, 50); 519 520 hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS; 521 if (!of_property_read_u32(np, "bp-max-total-current-microamp", 522 &property_u32)) 523 hub->max_power_bp = min_t(u8, property_u32 / 2000, 255); 524 525 hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF; 526 if (!of_property_read_u32(np, "sp-max-removable-current-microamp", 527 &property_u32)) 528 hub->max_current_sp = min_t(u8, property_u32 / 2000, 50); 529 530 hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS; 531 if (!of_property_read_u32(np, "bp-max-removable-current-microamp", 532 &property_u32)) 533 hub->max_current_bp = min_t(u8, property_u32 / 2000, 255); 534 535 hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; 536 if (!of_property_read_u32(np, "power-on-time-ms", &property_u32)) 537 hub->power_on_time = min_t(u8, property_u32 / 2, 255); 538 539 if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1)) 540 hub->lang_id = USB251XB_DEF_LANGUAGE_ID; 541 542 if (of_property_read_u8(np, "boost-up", &hub->boost_up)) 543 hub->boost_up = USB251XB_DEF_BOOST_UP; 544 545 cproperty_char = of_get_property(np, "manufacturer", NULL); 546 strscpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, 547 sizeof(str)); 548 hub->manufacturer_len = strlen(str) & 0xFF; 549 memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE); 550 len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); 551 len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN, 552 (wchar_t *)hub->manufacturer, 553 USB251XB_STRING_BUFSIZE); 554 555 cproperty_char = of_get_property(np, "product", NULL); 556 strscpy(str, cproperty_char ? : data->product_str, sizeof(str)); 557 hub->product_len = strlen(str) & 0xFF; 558 memset(hub->product, 0, USB251XB_STRING_BUFSIZE); 559 len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); 560 len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN, 561 (wchar_t *)hub->product, 562 USB251XB_STRING_BUFSIZE); 563 564 cproperty_char = of_get_property(np, "serial", NULL); 565 strscpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING, 566 sizeof(str)); 567 hub->serial_len = strlen(str) & 0xFF; 568 memset(hub->serial, 0, USB251XB_STRING_BUFSIZE); 569 len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); 570 len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN, 571 (wchar_t *)hub->serial, 572 USB251XB_STRING_BUFSIZE); 573 574 /* 575 * The datasheet documents the register as 'Port Swap' but in real the 576 * register controls the USB DP/DM signal swapping for each port. 577 */ 578 hub->port_swap = USB251XB_DEF_PORT_SWAP; 579 usb251xb_get_ports_field(hub, "swap-dx-lanes", data->port_cnt, 580 false, &hub->port_swap); 581 582 /* The following parameters are currently not exposed to devicetree, but 583 * may be as soon as needed. 584 */ 585 hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE; 586 hub->boost_57 = USB251XB_DEF_BOOST_57; 587 hub->boost_14 = USB251XB_DEF_BOOST_14; 588 hub->port_map12 = USB251XB_DEF_PORT_MAP_12; 589 hub->port_map34 = USB251XB_DEF_PORT_MAP_34; 590 hub->port_map56 = USB251XB_DEF_PORT_MAP_56; 591 hub->port_map7 = USB251XB_DEF_PORT_MAP_7; 592 593 return 0; 594 } 595 596 static const struct of_device_id usb251xb_of_match[] = { 597 { 598 .compatible = "microchip,usb2422", 599 .data = &usb2422_data, 600 }, { 601 .compatible = "microchip,usb2512b", 602 .data = &usb2512b_data, 603 }, { 604 .compatible = "microchip,usb2512bi", 605 .data = &usb2512bi_data, 606 }, { 607 .compatible = "microchip,usb2513b", 608 .data = &usb2513b_data, 609 }, { 610 .compatible = "microchip,usb2513bi", 611 .data = &usb2513bi_data, 612 }, { 613 .compatible = "microchip,usb2514b", 614 .data = &usb2514b_data, 615 }, { 616 .compatible = "microchip,usb2514bi", 617 .data = &usb2514bi_data, 618 }, { 619 .compatible = "microchip,usb2517", 620 .data = &usb2517_data, 621 }, { 622 .compatible = "microchip,usb2517i", 623 .data = &usb2517i_data, 624 }, { 625 /* sentinel */ 626 } 627 }; 628 MODULE_DEVICE_TABLE(of, usb251xb_of_match); 629 #else /* CONFIG_OF */ 630 static int usb251xb_get_ofdata(struct usb251xb *hub, 631 const struct usb251xb_data *data) 632 { 633 return 0; 634 } 635 #endif /* CONFIG_OF */ 636 637 static void usb251xb_regulator_disable_action(void *data) 638 { 639 struct usb251xb *hub = data; 640 641 regulator_disable(hub->vdd); 642 } 643 644 static int usb251xb_probe(struct usb251xb *hub) 645 { 646 struct device *dev = hub->dev; 647 struct device_node *np = dev->of_node; 648 const struct usb251xb_data *usb_data = of_device_get_match_data(dev); 649 int err; 650 651 if (np && usb_data) { 652 err = usb251xb_get_ofdata(hub, usb_data); 653 if (err) { 654 dev_err(dev, "failed to get ofdata: %d\n", err); 655 return err; 656 } 657 } 658 659 /* 660 * usb251x SMBus-slave SCL lane is muxed with CFG_SEL0 pin. So if anyone 661 * tries to work with the bus at the moment the hub reset is released, 662 * it may cause an invalid config being latched by usb251x. Particularly 663 * one of the config modes makes the hub loading a default registers 664 * value without SMBus-slave interface activation. If the hub 665 * accidentally gets this mode, this will cause the driver SMBus- 666 * functions failure. Normally we could just lock the SMBus-segment the 667 * hub i2c-interface resides for the device-specific reset timing. But 668 * the GPIO controller, which is used to handle the hub reset, might be 669 * placed at the same i2c-bus segment. In this case an error should be 670 * returned since we can't safely use the GPIO controller to clear the 671 * reset state (it may affect the hub configuration) and we can't lock 672 * the i2c-bus segment (it will cause a deadlock). 673 */ 674 err = usb251x_check_gpio_chip(hub); 675 if (err) 676 return err; 677 678 hub->vdd = devm_regulator_get(dev, "vdd"); 679 if (IS_ERR(hub->vdd)) 680 return PTR_ERR(hub->vdd); 681 682 err = regulator_enable(hub->vdd); 683 if (err) 684 return err; 685 686 err = devm_add_action_or_reset(dev, 687 usb251xb_regulator_disable_action, hub); 688 if (err) 689 return err; 690 691 err = usb251xb_connect(hub); 692 if (err) { 693 dev_err(dev, "Failed to connect hub (%d)\n", err); 694 return err; 695 } 696 697 dev_info(dev, "Hub probed successfully\n"); 698 699 return 0; 700 } 701 702 static int usb251xb_i2c_probe(struct i2c_client *i2c) 703 { 704 struct usb251xb *hub; 705 706 hub = devm_kzalloc(&i2c->dev, sizeof(struct usb251xb), GFP_KERNEL); 707 if (!hub) 708 return -ENOMEM; 709 710 i2c_set_clientdata(i2c, hub); 711 hub->dev = &i2c->dev; 712 hub->i2c = i2c; 713 714 return usb251xb_probe(hub); 715 } 716 717 static int __maybe_unused usb251xb_suspend(struct device *dev) 718 { 719 struct i2c_client *client = to_i2c_client(dev); 720 struct usb251xb *hub = i2c_get_clientdata(client); 721 722 return regulator_disable(hub->vdd); 723 } 724 725 static int __maybe_unused usb251xb_resume(struct device *dev) 726 { 727 struct i2c_client *client = to_i2c_client(dev); 728 struct usb251xb *hub = i2c_get_clientdata(client); 729 int err; 730 731 err = regulator_enable(hub->vdd); 732 if (err) 733 return err; 734 735 return usb251xb_connect(hub); 736 } 737 738 static SIMPLE_DEV_PM_OPS(usb251xb_pm_ops, usb251xb_suspend, usb251xb_resume); 739 740 static const struct i2c_device_id usb251xb_id[] = { 741 { "usb2422", 0 }, 742 { "usb2512b", 0 }, 743 { "usb2512bi", 0 }, 744 { "usb2513b", 0 }, 745 { "usb2513bi", 0 }, 746 { "usb2514b", 0 }, 747 { "usb2514bi", 0 }, 748 { "usb2517", 0 }, 749 { "usb2517i", 0 }, 750 { /* sentinel */ } 751 }; 752 MODULE_DEVICE_TABLE(i2c, usb251xb_id); 753 754 static struct i2c_driver usb251xb_i2c_driver = { 755 .driver = { 756 .name = DRIVER_NAME, 757 .of_match_table = of_match_ptr(usb251xb_of_match), 758 .pm = &usb251xb_pm_ops, 759 }, 760 .probe_new = usb251xb_i2c_probe, 761 .id_table = usb251xb_id, 762 }; 763 764 module_i2c_driver(usb251xb_i2c_driver); 765 766 MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>"); 767 MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver"); 768 MODULE_LICENSE("GPL"); 769