1 /* 2 * Emagic EMI 2|6 usb audio interface firmware loader. 3 * Copyright (C) 2002 4 * Tapio Laxström (tapio.laxstrom@iptime.fi) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License, as published by 8 * the Free Software Foundation, version 2. 9 * 10 * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp 11 */ 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/slab.h> 15 #include <linux/module.h> 16 #include <linux/init.h> 17 #include <linux/usb.h> 18 #include <linux/delay.h> 19 #include <linux/firmware.h> 20 #include <linux/ihex.h> 21 22 #define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ 23 #define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */ 24 #define EMI26B_PRODUCT_ID 0x0102 /* EMI 2|6 without firmware */ 25 26 #define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ 27 #define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ 28 #define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ 29 #define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ 30 #define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ 31 #define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) 32 33 static int emi26_writememory( struct usb_device *dev, int address, 34 const unsigned char *data, int length, 35 __u8 bRequest); 36 static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); 37 static int emi26_load_firmware (struct usb_device *dev); 38 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); 39 static void emi26_disconnect(struct usb_interface *intf); 40 static int __init emi26_init (void); 41 static void __exit emi26_exit (void); 42 43 44 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 45 static int emi26_writememory (struct usb_device *dev, int address, 46 const unsigned char *data, int length, 47 __u8 request) 48 { 49 int result; 50 unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); 51 52 if (!buffer) { 53 dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); 54 return -ENOMEM; 55 } 56 /* Note: usb_control_msg returns negative value on error or length of the 57 * data that was written! */ 58 result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); 59 kfree (buffer); 60 return result; 61 } 62 63 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 64 static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) 65 { 66 int response; 67 dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); 68 /* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */ 69 response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); 70 if (response < 0) { 71 dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); 72 } 73 return response; 74 } 75 76 #define FW_LOAD_SIZE 1023 77 78 static int emi26_load_firmware (struct usb_device *dev) 79 { 80 const struct firmware *loader_fw = NULL; 81 const struct firmware *bitstream_fw = NULL; 82 const struct firmware *firmware_fw = NULL; 83 const struct ihex_binrec *rec; 84 int err; 85 int i; 86 __u32 addr; /* Address to write */ 87 __u8 *buf; 88 89 buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); 90 if (!buf) { 91 dev_err(&dev->dev, "%s - error loading firmware: error = %d\n", 92 __func__, -ENOMEM); 93 err = -ENOMEM; 94 goto wraperr; 95 } 96 97 err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); 98 if (err) 99 goto nofw; 100 101 err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw", 102 &dev->dev); 103 if (err) 104 goto nofw; 105 106 err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw", 107 &dev->dev); 108 if (err) { 109 nofw: 110 dev_err(&dev->dev, "%s - request_firmware() failed\n", 111 __func__); 112 goto wraperr; 113 } 114 115 /* Assert reset (stop the CPU in the EMI) */ 116 err = emi26_set_reset(dev,1); 117 if (err < 0) { 118 dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", 119 __func__, err); 120 goto wraperr; 121 } 122 123 rec = (const struct ihex_binrec *)loader_fw->data; 124 /* 1. We need to put the loader for the FPGA into the EZ-USB */ 125 while (rec) { 126 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 127 rec->data, be16_to_cpu(rec->len), 128 ANCHOR_LOAD_INTERNAL); 129 if (err < 0) { 130 err("%s - error loading firmware: error = %d", __func__, err); 131 goto wraperr; 132 } 133 rec = ihex_next_binrec(rec); 134 } 135 136 /* De-assert reset (let the CPU run) */ 137 err = emi26_set_reset(dev,0); 138 if (err < 0) { 139 err("%s - error loading firmware: error = %d", __func__, err); 140 goto wraperr; 141 } 142 msleep(250); /* let device settle */ 143 144 /* 2. We upload the FPGA firmware into the EMI 145 * Note: collect up to 1023 (yes!) bytes and send them with 146 * a single request. This is _much_ faster! */ 147 rec = (const struct ihex_binrec *)bitstream_fw->data; 148 do { 149 i = 0; 150 addr = be32_to_cpu(rec->addr); 151 152 /* intel hex records are terminated with type 0 element */ 153 while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) { 154 memcpy(buf + i, rec->data, be16_to_cpu(rec->len)); 155 i += be16_to_cpu(rec->len); 156 rec = ihex_next_binrec(rec); 157 } 158 err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); 159 if (err < 0) { 160 err("%s - error loading firmware: error = %d", __func__, err); 161 goto wraperr; 162 } 163 } while (rec); 164 165 /* Assert reset (stop the CPU in the EMI) */ 166 err = emi26_set_reset(dev,1); 167 if (err < 0) { 168 err("%s - error loading firmware: error = %d", __func__, err); 169 goto wraperr; 170 } 171 172 /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ 173 for (rec = (const struct ihex_binrec *)loader_fw->data; 174 rec; rec = ihex_next_binrec(rec)) { 175 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 176 rec->data, be16_to_cpu(rec->len), 177 ANCHOR_LOAD_INTERNAL); 178 if (err < 0) { 179 err("%s - error loading firmware: error = %d", __func__, err); 180 goto wraperr; 181 } 182 } 183 msleep(250); /* let device settle */ 184 185 /* De-assert reset (let the CPU run) */ 186 err = emi26_set_reset(dev,0); 187 if (err < 0) { 188 err("%s - error loading firmware: error = %d", __func__, err); 189 goto wraperr; 190 } 191 192 /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ 193 194 for (rec = (const struct ihex_binrec *)firmware_fw->data; 195 rec; rec = ihex_next_binrec(rec)) { 196 if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) { 197 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 198 rec->data, be16_to_cpu(rec->len), 199 ANCHOR_LOAD_EXTERNAL); 200 if (err < 0) { 201 err("%s - error loading firmware: error = %d", __func__, err); 202 goto wraperr; 203 } 204 } 205 } 206 207 /* Assert reset (stop the CPU in the EMI) */ 208 err = emi26_set_reset(dev,1); 209 if (err < 0) { 210 err("%s - error loading firmware: error = %d", __func__, err); 211 goto wraperr; 212 } 213 214 for (rec = (const struct ihex_binrec *)firmware_fw->data; 215 rec; rec = ihex_next_binrec(rec)) { 216 if (INTERNAL_RAM(be32_to_cpu(rec->addr))) { 217 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 218 rec->data, be16_to_cpu(rec->len), 219 ANCHOR_LOAD_INTERNAL); 220 if (err < 0) { 221 err("%s - error loading firmware: error = %d", __func__, err); 222 goto wraperr; 223 } 224 } 225 } 226 227 /* De-assert reset (let the CPU run) */ 228 err = emi26_set_reset(dev,0); 229 if (err < 0) { 230 err("%s - error loading firmware: error = %d", __func__, err); 231 goto wraperr; 232 } 233 msleep(250); /* let device settle */ 234 235 /* return 1 to fail the driver inialization 236 * and give real driver change to load */ 237 err = 1; 238 239 wraperr: 240 release_firmware(loader_fw); 241 release_firmware(bitstream_fw); 242 release_firmware(firmware_fw); 243 244 kfree(buf); 245 return err; 246 } 247 248 static struct usb_device_id id_table [] = { 249 { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, 250 { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, 251 { } /* Terminating entry */ 252 }; 253 254 MODULE_DEVICE_TABLE (usb, id_table); 255 256 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id) 257 { 258 struct usb_device *dev = interface_to_usbdev(intf); 259 260 dev_info(&intf->dev, "%s start\n", __func__); 261 262 emi26_load_firmware(dev); 263 264 /* do not return the driver context, let real audio driver do that */ 265 return -EIO; 266 } 267 268 static void emi26_disconnect(struct usb_interface *intf) 269 { 270 } 271 272 static struct usb_driver emi26_driver = { 273 .name = "emi26 - firmware loader", 274 .probe = emi26_probe, 275 .disconnect = emi26_disconnect, 276 .id_table = id_table, 277 }; 278 279 static int __init emi26_init (void) 280 { 281 return usb_register(&emi26_driver); 282 } 283 284 static void __exit emi26_exit (void) 285 { 286 usb_deregister (&emi26_driver); 287 } 288 289 module_init(emi26_init); 290 module_exit(emi26_exit); 291 292 MODULE_AUTHOR("Tapio Laxström"); 293 MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader."); 294 MODULE_LICENSE("GPL"); 295 296 MODULE_FIRMWARE("emi26/loader.fw"); 297 MODULE_FIRMWARE("emi26/bitstream.fw"); 298 MODULE_FIRMWARE("emi26/firmware.fw"); 299 /* vi:ai:syntax=c:sw=8:ts=8:tw=80 300 */ 301