xref: /linux/drivers/usb/misc/ehset.c (revision 87c9c16317882dd6dbbc07e349bc3223e14f3244)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
4  */
5 
6 #include <linux/kernel.h>
7 #include <linux/errno.h>
8 #include <linux/module.h>
9 #include <linux/slab.h>
10 #include <linux/usb.h>
11 #include <linux/usb/ch11.h>
12 
13 #define TEST_SE0_NAK_PID			0x0101
14 #define TEST_J_PID				0x0102
15 #define TEST_K_PID				0x0103
16 #define TEST_PACKET_PID				0x0104
17 #define TEST_HS_HOST_PORT_SUSPEND_RESUME	0x0106
18 #define TEST_SINGLE_STEP_GET_DEV_DESC		0x0107
19 #define TEST_SINGLE_STEP_SET_FEATURE		0x0108
20 
21 static int ehset_probe(struct usb_interface *intf,
22 		       const struct usb_device_id *id)
23 {
24 	int ret = -EINVAL;
25 	struct usb_device *dev = interface_to_usbdev(intf);
26 	struct usb_device *hub_udev = dev->parent;
27 	struct usb_device_descriptor buf;
28 	u8 portnum = dev->portnum;
29 	u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
30 
31 	switch (test_pid) {
32 	case TEST_SE0_NAK_PID:
33 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
34 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
35 					   (USB_TEST_SE0_NAK << 8) | portnum,
36 					   NULL, 0, 1000, GFP_KERNEL);
37 		break;
38 	case TEST_J_PID:
39 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
40 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
41 					   (USB_TEST_J << 8) | portnum, NULL, 0,
42 					   1000, GFP_KERNEL);
43 		break;
44 	case TEST_K_PID:
45 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
46 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
47 					   (USB_TEST_K << 8) | portnum, NULL, 0,
48 					   1000, GFP_KERNEL);
49 		break;
50 	case TEST_PACKET_PID:
51 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
52 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
53 					   (USB_TEST_PACKET << 8) | portnum,
54 					   NULL, 0, 1000, GFP_KERNEL);
55 		break;
56 	case TEST_HS_HOST_PORT_SUSPEND_RESUME:
57 		/* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
58 		msleep(15 * 1000);
59 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
60 					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
61 					   portnum, NULL, 0, 1000, GFP_KERNEL);
62 		if (ret < 0)
63 			break;
64 
65 		msleep(15 * 1000);
66 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_CLEAR_FEATURE,
67 					   USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
68 					   portnum, NULL, 0, 1000, GFP_KERNEL);
69 		break;
70 	case TEST_SINGLE_STEP_GET_DEV_DESC:
71 		/* Test: wait for 15secs -> GetDescriptor request */
72 		msleep(15 * 1000);
73 
74 		ret = usb_control_msg_recv(dev, 0, USB_REQ_GET_DESCRIPTOR,
75 					   USB_DIR_IN, USB_DT_DEVICE << 8, 0,
76 					   &buf, USB_DT_DEVICE_SIZE,
77 					   USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
78 		break;
79 	case TEST_SINGLE_STEP_SET_FEATURE:
80 		/*
81 		 * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
82 		 *
83 		 * Note, this test is only supported on root hubs since the
84 		 * SetPortFeature handling can only be done inside the HCD's
85 		 * hub_control callback function.
86 		 */
87 		if (hub_udev != dev->bus->root_hub) {
88 			dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
89 			break;
90 		}
91 
92 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
93 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
94 					   (6 << 8) | portnum, NULL, 0,
95 					   60 * 1000, GFP_KERNEL);
96 
97 		break;
98 	default:
99 		dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
100 			__func__, test_pid);
101 	}
102 
103 	return ret;
104 }
105 
106 static void ehset_disconnect(struct usb_interface *intf)
107 {
108 }
109 
110 static const struct usb_device_id ehset_id_table[] = {
111 	{ USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
112 	{ USB_DEVICE(0x1a0a, TEST_J_PID) },
113 	{ USB_DEVICE(0x1a0a, TEST_K_PID) },
114 	{ USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
115 	{ USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
116 	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
117 	{ USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
118 	{ }			/* Terminating entry */
119 };
120 MODULE_DEVICE_TABLE(usb, ehset_id_table);
121 
122 static struct usb_driver ehset_driver = {
123 	.name =		"usb_ehset_test",
124 	.probe =	ehset_probe,
125 	.disconnect =	ehset_disconnect,
126 	.id_table =	ehset_id_table,
127 };
128 
129 module_usb_driver(ehset_driver);
130 
131 MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
132 MODULE_LICENSE("GPL v2");
133