xref: /linux/drivers/usb/misc/appledisplay.c (revision 9e9f60108423f18a99c9cc93ef7f23490ecc709b)
1 /*
2  * Apple Cinema Display driver
3  *
4  * Copyright (C) 2006  Michael Hanselmann (linux-kernel@hansmi.ch)
5  *
6  * Thanks to Caskey L. Dickson for his work with acdctl.
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
21  */
22 
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/usb.h>
29 #include <linux/backlight.h>
30 #include <linux/timer.h>
31 #include <linux/workqueue.h>
32 #include <linux/atomic.h>
33 
34 #define APPLE_VENDOR_ID		0x05AC
35 
36 #define USB_REQ_GET_REPORT	0x01
37 #define USB_REQ_SET_REPORT	0x09
38 
39 #define ACD_USB_TIMEOUT		250
40 
41 #define ACD_USB_EDID		0x0302
42 #define ACD_USB_BRIGHTNESS	0x0310
43 
44 #define ACD_BTN_NONE		0
45 #define ACD_BTN_BRIGHT_UP	3
46 #define ACD_BTN_BRIGHT_DOWN	4
47 
48 #define ACD_URB_BUFFER_LEN	2
49 #define ACD_MSG_BUFFER_LEN	2
50 
51 #define APPLEDISPLAY_DEVICE(prod)				\
52 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
53 		       USB_DEVICE_ID_MATCH_INT_CLASS |		\
54 		       USB_DEVICE_ID_MATCH_INT_PROTOCOL,	\
55 	.idVendor = APPLE_VENDOR_ID,				\
56 	.idProduct = (prod),					\
57 	.bInterfaceClass = USB_CLASS_HID,			\
58 	.bInterfaceProtocol = 0x00
59 
60 /* table of devices that work with this driver */
61 static const struct usb_device_id appledisplay_table[] = {
62 	{ APPLEDISPLAY_DEVICE(0x9218) },
63 	{ APPLEDISPLAY_DEVICE(0x9219) },
64 	{ APPLEDISPLAY_DEVICE(0x921c) },
65 	{ APPLEDISPLAY_DEVICE(0x921d) },
66 	{ APPLEDISPLAY_DEVICE(0x9236) },
67 
68 	/* Terminating entry */
69 	{ }
70 };
71 MODULE_DEVICE_TABLE(usb, appledisplay_table);
72 
73 /* Structure to hold all of our device specific stuff */
74 struct appledisplay {
75 	struct usb_device *udev;	/* usb device */
76 	struct urb *urb;		/* usb request block */
77 	struct backlight_device *bd;	/* backlight device */
78 	u8 *urbdata;			/* interrupt URB data buffer */
79 	u8 *msgdata;			/* control message data buffer */
80 
81 	struct delayed_work work;
82 	int button_pressed;
83 	spinlock_t lock;
84 	struct mutex sysfslock;		/* concurrent read and write */
85 };
86 
87 static atomic_t count_displays = ATOMIC_INIT(0);
88 static struct workqueue_struct *wq;
89 
90 static void appledisplay_complete(struct urb *urb)
91 {
92 	struct appledisplay *pdata = urb->context;
93 	struct device *dev = &pdata->udev->dev;
94 	unsigned long flags;
95 	int status = urb->status;
96 	int retval;
97 
98 	switch (status) {
99 	case 0:
100 		/* success */
101 		break;
102 	case -EOVERFLOW:
103 		dev_err(dev,
104 			"OVERFLOW with data length %d, actual length is %d\n",
105 			ACD_URB_BUFFER_LEN, pdata->urb->actual_length);
106 	case -ECONNRESET:
107 	case -ENOENT:
108 	case -ESHUTDOWN:
109 		/* This urb is terminated, clean up */
110 		dev_dbg(dev, "%s - urb shuttingdown with status: %d\n",
111 			__func__, status);
112 		return;
113 	default:
114 		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
115 			__func__, status);
116 		goto exit;
117 	}
118 
119 	spin_lock_irqsave(&pdata->lock, flags);
120 
121 	switch(pdata->urbdata[1]) {
122 	case ACD_BTN_BRIGHT_UP:
123 	case ACD_BTN_BRIGHT_DOWN:
124 		pdata->button_pressed = 1;
125 		queue_delayed_work(wq, &pdata->work, 0);
126 		break;
127 	case ACD_BTN_NONE:
128 	default:
129 		pdata->button_pressed = 0;
130 		break;
131 	}
132 
133 	spin_unlock_irqrestore(&pdata->lock, flags);
134 
135 exit:
136 	retval = usb_submit_urb(pdata->urb, GFP_ATOMIC);
137 	if (retval) {
138 		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
139 			__func__, retval);
140 	}
141 }
142 
143 static int appledisplay_bl_update_status(struct backlight_device *bd)
144 {
145 	struct appledisplay *pdata = bl_get_data(bd);
146 	int retval;
147 
148 	mutex_lock(&pdata->sysfslock);
149 	pdata->msgdata[0] = 0x10;
150 	pdata->msgdata[1] = bd->props.brightness;
151 
152 	retval = usb_control_msg(
153 		pdata->udev,
154 		usb_sndctrlpipe(pdata->udev, 0),
155 		USB_REQ_SET_REPORT,
156 		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
157 		ACD_USB_BRIGHTNESS,
158 		0,
159 		pdata->msgdata, 2,
160 		ACD_USB_TIMEOUT);
161 	mutex_unlock(&pdata->sysfslock);
162 
163 	return retval;
164 }
165 
166 static int appledisplay_bl_get_brightness(struct backlight_device *bd)
167 {
168 	struct appledisplay *pdata = bl_get_data(bd);
169 	int retval, brightness;
170 
171 	mutex_lock(&pdata->sysfslock);
172 	retval = usb_control_msg(
173 		pdata->udev,
174 		usb_rcvctrlpipe(pdata->udev, 0),
175 		USB_REQ_GET_REPORT,
176 		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
177 		ACD_USB_BRIGHTNESS,
178 		0,
179 		pdata->msgdata, 2,
180 		ACD_USB_TIMEOUT);
181 	brightness = pdata->msgdata[1];
182 	mutex_unlock(&pdata->sysfslock);
183 
184 	if (retval < 0)
185 		return retval;
186 	else
187 		return brightness;
188 }
189 
190 static const struct backlight_ops appledisplay_bl_data = {
191 	.get_brightness	= appledisplay_bl_get_brightness,
192 	.update_status	= appledisplay_bl_update_status,
193 };
194 
195 static void appledisplay_work(struct work_struct *work)
196 {
197 	struct appledisplay *pdata =
198 		container_of(work, struct appledisplay, work.work);
199 	int retval;
200 
201 	retval = appledisplay_bl_get_brightness(pdata->bd);
202 	if (retval >= 0)
203 		pdata->bd->props.brightness = retval;
204 
205 	/* Poll again in about 125ms if there's still a button pressed */
206 	if (pdata->button_pressed)
207 		schedule_delayed_work(&pdata->work, HZ / 8);
208 }
209 
210 static int appledisplay_probe(struct usb_interface *iface,
211 	const struct usb_device_id *id)
212 {
213 	struct backlight_properties props;
214 	struct appledisplay *pdata;
215 	struct usb_device *udev = interface_to_usbdev(iface);
216 	struct usb_host_interface *iface_desc;
217 	struct usb_endpoint_descriptor *endpoint;
218 	int int_in_endpointAddr = 0;
219 	int i, retval = -ENOMEM, brightness;
220 	char bl_name[20];
221 
222 	/* set up the endpoint information */
223 	/* use only the first interrupt-in endpoint */
224 	iface_desc = iface->cur_altsetting;
225 	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
226 		endpoint = &iface_desc->endpoint[i].desc;
227 		if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
228 			/* we found an interrupt in endpoint */
229 			int_in_endpointAddr = endpoint->bEndpointAddress;
230 			break;
231 		}
232 	}
233 	if (!int_in_endpointAddr) {
234 		dev_err(&iface->dev, "Could not find int-in endpoint\n");
235 		return -EIO;
236 	}
237 
238 	/* allocate memory for our device state and initialize it */
239 	pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL);
240 	if (!pdata) {
241 		retval = -ENOMEM;
242 		dev_err(&iface->dev, "Out of memory\n");
243 		goto error;
244 	}
245 
246 	pdata->udev = udev;
247 
248 	spin_lock_init(&pdata->lock);
249 	INIT_DELAYED_WORK(&pdata->work, appledisplay_work);
250 	mutex_init(&pdata->sysfslock);
251 
252 	/* Allocate buffer for control messages */
253 	pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL);
254 	if (!pdata->msgdata) {
255 		retval = -ENOMEM;
256 		dev_err(&iface->dev,
257 			"Allocating buffer for control messages failed\n");
258 		goto error;
259 	}
260 
261 	/* Allocate interrupt URB */
262 	pdata->urb = usb_alloc_urb(0, GFP_KERNEL);
263 	if (!pdata->urb) {
264 		retval = -ENOMEM;
265 		dev_err(&iface->dev, "Allocating URB failed\n");
266 		goto error;
267 	}
268 
269 	/* Allocate buffer for interrupt data */
270 	pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
271 		GFP_KERNEL, &pdata->urb->transfer_dma);
272 	if (!pdata->urbdata) {
273 		retval = -ENOMEM;
274 		dev_err(&iface->dev, "Allocating URB buffer failed\n");
275 		goto error;
276 	}
277 
278 	/* Configure interrupt URB */
279 	usb_fill_int_urb(pdata->urb, udev,
280 		usb_rcvintpipe(udev, int_in_endpointAddr),
281 		pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete,
282 		pdata, 1);
283 	if (usb_submit_urb(pdata->urb, GFP_KERNEL)) {
284 		retval = -EIO;
285 		dev_err(&iface->dev, "Submitting URB failed\n");
286 		goto error;
287 	}
288 
289 	/* Register backlight device */
290 	snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
291 		atomic_inc_return(&count_displays) - 1);
292 	memset(&props, 0, sizeof(struct backlight_properties));
293 	props.type = BACKLIGHT_RAW;
294 	props.max_brightness = 0xff;
295 	pdata->bd = backlight_device_register(bl_name, NULL, pdata,
296 					      &appledisplay_bl_data, &props);
297 	if (IS_ERR(pdata->bd)) {
298 		dev_err(&iface->dev, "Backlight registration failed\n");
299 		retval = PTR_ERR(pdata->bd);
300 		goto error;
301 	}
302 
303 	/* Try to get brightness */
304 	brightness = appledisplay_bl_get_brightness(pdata->bd);
305 
306 	if (brightness < 0) {
307 		retval = brightness;
308 		dev_err(&iface->dev,
309 			"Error while getting initial brightness: %d\n", retval);
310 		goto error;
311 	}
312 
313 	/* Set brightness in backlight device */
314 	pdata->bd->props.brightness = brightness;
315 
316 	/* save our data pointer in the interface device */
317 	usb_set_intfdata(iface, pdata);
318 
319 	printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n");
320 
321 	return 0;
322 
323 error:
324 	if (pdata) {
325 		if (pdata->urb) {
326 			usb_kill_urb(pdata->urb);
327 			if (pdata->urbdata)
328 				usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
329 					pdata->urbdata, pdata->urb->transfer_dma);
330 			usb_free_urb(pdata->urb);
331 		}
332 		if (pdata->bd && !IS_ERR(pdata->bd))
333 			backlight_device_unregister(pdata->bd);
334 		kfree(pdata->msgdata);
335 	}
336 	usb_set_intfdata(iface, NULL);
337 	kfree(pdata);
338 	return retval;
339 }
340 
341 static void appledisplay_disconnect(struct usb_interface *iface)
342 {
343 	struct appledisplay *pdata = usb_get_intfdata(iface);
344 
345 	if (pdata) {
346 		usb_kill_urb(pdata->urb);
347 		cancel_delayed_work(&pdata->work);
348 		backlight_device_unregister(pdata->bd);
349 		usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
350 			pdata->urbdata, pdata->urb->transfer_dma);
351 		usb_free_urb(pdata->urb);
352 		kfree(pdata->msgdata);
353 		kfree(pdata);
354 	}
355 
356 	printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n");
357 }
358 
359 static struct usb_driver appledisplay_driver = {
360 	.name		= "appledisplay",
361 	.probe		= appledisplay_probe,
362 	.disconnect	= appledisplay_disconnect,
363 	.id_table	= appledisplay_table,
364 };
365 
366 static int __init appledisplay_init(void)
367 {
368 	wq = create_singlethread_workqueue("appledisplay");
369 	if (!wq) {
370 		printk(KERN_ERR "appledisplay: Could not create work queue\n");
371 		return -ENOMEM;
372 	}
373 
374 	return usb_register(&appledisplay_driver);
375 }
376 
377 static void __exit appledisplay_exit(void)
378 {
379 	flush_workqueue(wq);
380 	destroy_workqueue(wq);
381 	usb_deregister(&appledisplay_driver);
382 }
383 
384 MODULE_AUTHOR("Michael Hanselmann");
385 MODULE_DESCRIPTION("Apple Cinema Display driver");
386 MODULE_LICENSE("GPL");
387 
388 module_init(appledisplay_init);
389 module_exit(appledisplay_exit);
390