1# SPDX-License-Identifier: GPL-2.0 2# 3# USB Miscellaneous driver configuration 4# 5comment "USB Miscellaneous drivers" 6 7config USB_EMI62 8 tristate "EMI 6|2m USB Audio interface support" 9 ---help--- 10 This driver loads firmware to Emagic EMI 6|2m low latency USB 11 Audio and Midi interface. 12 13 After firmware load the device is handled with standard linux 14 USB Audio driver. 15 16 This code is also available as a module ( = code which can be 17 inserted in and removed from the running kernel whenever you want). 18 The module will be called audio. If you want to compile it as a 19 module, say M here and read <file:Documentation/kbuild/modules.rst>. 20 21config USB_EMI26 22 tristate "EMI 2|6 USB Audio interface support" 23 ---help--- 24 This driver loads firmware to Emagic EMI 2|6 low latency USB 25 Audio interface. 26 27 After firmware load the device is handled with standard linux 28 USB Audio driver. 29 30 To compile this driver as a module, choose M here: the 31 module will be called emi26. 32 33config USB_ADUTUX 34 tristate "ADU devices from Ontrak Control Systems" 35 help 36 Say Y if you want to use an ADU device from Ontrak Control 37 Systems. 38 39 To compile this driver as a module, choose M here. The module 40 will be called adutux. 41 42config USB_SEVSEG 43 tristate "USB 7-Segment LED Display" 44 help 45 Say Y here if you have a USB 7-Segment Display by Delcom 46 47 To compile this driver as a module, choose M here: the 48 module will be called usbsevseg. 49 50config USB_RIO500 51 tristate "USB Diamond Rio500 support" 52 help 53 Say Y here if you want to connect a USB Rio500 mp3 player to your 54 computer's USB port. Please read <file:Documentation/usb/rio.rst> 55 for more information. 56 57 To compile this driver as a module, choose M here: the 58 module will be called rio500. 59 60config USB_LEGOTOWER 61 tristate "USB Lego Infrared Tower support" 62 help 63 Say Y here if you want to connect a USB Lego Infrared Tower to your 64 computer's USB port. 65 66 This code is also available as a module ( = code which can be 67 inserted in and removed from the running kernel whenever you want). 68 The module will be called legousbtower. If you want to compile it as 69 a module, say M here and read 70 <file:Documentation/kbuild/modules.rst>. 71 72config USB_LCD 73 tristate "USB LCD driver support" 74 help 75 Say Y here if you want to connect an USBLCD to your computer's 76 USB port. The USBLCD is a small USB interface board for 77 alphanumeric LCD modules. See <http://www.usblcd.de/> for more 78 information. 79 80 To compile this driver as a module, choose M here: the 81 module will be called usblcd. 82 83config USB_CYPRESS_CY7C63 84 tristate "Cypress CY7C63xxx USB driver support" 85 help 86 Say Y here if you want to connect a Cypress CY7C63xxx 87 micro controller to your computer's USB port. Currently this 88 driver supports the pre-programmed devices (incl. firmware) 89 by AK Modul-Bus Computer GmbH. 90 91 Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html 92 93 To compile this driver as a module, choose M here: the 94 module will be called cypress_cy7c63. 95 96config USB_CYTHERM 97 tristate "Cypress USB thermometer driver support" 98 help 99 Say Y here if you want to connect a Cypress USB thermometer 100 device to your computer's USB port. This device is also known 101 as the Cypress USB Starter kit or demo board. The Elektor 102 magazine published a modified version of this device in issue 103 #291. 104 105 To compile this driver as a module, choose M here: the 106 module will be called cytherm. 107 108config USB_IDMOUSE 109 tristate "Siemens ID USB Mouse Fingerprint sensor support" 110 help 111 Say Y here if you want to use the fingerprint sensor on 112 the Siemens ID Mouse. There is also a Siemens ID Mouse 113 _Professional_, which has not been tested with this driver, 114 but uses the same sensor and may therefore work. 115 116 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", 117 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". 118 119 See also <http://www.fs.tum.de/~echtler/idmouse/>. 120 121config USB_FTDI_ELAN 122 tristate "Elan PCMCIA CardBus Adapter USB Client" 123 help 124 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. 125 Currently only the U132 adapter is available. 126 127 The U132 is specifically designed for CardBus PC cards that contain 128 an OHCI host controller. Typical PC cards are the Orange Mobile 3G 129 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work 130 with PC cards that do not contain an OHCI controller. To use a U132 131 adapter you will need this "ftdi-elan" module as well as the "u132-hcd" 132 module which is a USB host controller driver that talks to the OHCI 133 controller within CardBus card that are inserted in the U132 adapter. 134 135 This driver has been tested with a CardBus OHCI USB adapter, and 136 worked with a USB PEN Drive inserted into the first USB port of 137 the PCCARD. A rather pointless thing to do, but useful for testing. 138 139 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" 140 141 It is safe to say M here. 142 143config USB_APPLEDISPLAY 144 tristate "Apple Cinema Display support" 145 select BACKLIGHT_CLASS_DEVICE 146 help 147 Say Y here if you want to control the backlight of Apple Cinema 148 Displays over USB. This driver provides a sysfs interface. 149 150source "drivers/usb/misc/sisusbvga/Kconfig" 151 152config USB_LD 153 tristate "USB LD driver" 154 help 155 This driver is for generic USB devices that use interrupt transfers, 156 like LD Didactic's USB devices. 157 158 To compile this driver as a module, choose M here: the 159 module will be called ldusb. 160 161config USB_TRANCEVIBRATOR 162 tristate "PlayStation 2 Trance Vibrator driver support" 163 help 164 Say Y here if you want to connect a PlayStation 2 Trance Vibrator 165 device to your computer's USB port. 166 167 To compile this driver as a module, choose M here: the 168 module will be called trancevibrator. 169 170config USB_IOWARRIOR 171 tristate "IO Warrior driver support" 172 help 173 Say Y here if you want to support the IO Warrior devices from Code 174 Mercenaries. This includes support for the following devices: 175 IO Warrior 40 176 IO Warrior 24 177 IO Warrior 56 178 IO Warrior 24 Power Vampire 179 180 To compile this driver as a module, choose M here: the 181 module will be called iowarrior. 182 183config USB_TEST 184 tristate "USB testing driver" 185 help 186 This driver is for testing host controller software. It is used 187 with specialized device firmware for regression and stress testing, 188 to help prevent problems from cropping up with "real" drivers. 189 190 See <http://www.linux-usb.org/usbtest/> for more information, 191 including sample test device firmware and "how to use it". 192 193config USB_EHSET_TEST_FIXTURE 194 tristate "USB EHSET Test Fixture driver" 195 help 196 Say Y here if you want to support the special test fixture device 197 used for the USB-IF Embedded Host High-Speed Electrical Test procedure. 198 199 When the test fixture is connected, it can enumerate as one of several 200 VID/PID pairs. This driver then initiates a corresponding test mode on 201 the downstream port to which the test fixture is attached. 202 203 See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more 204 information. 205 206config USB_ISIGHTFW 207 tristate "iSight firmware loading support" 208 select FW_LOADER 209 help 210 This driver loads firmware for USB Apple iSight cameras, allowing 211 them to be driven by the USB video class driver available at 212 http://linux-uvc.berlios.de 213 214 The firmware for this driver must be extracted from the MacOS 215 driver beforehand. Tools for doing so are available at 216 http://bersace03.free.fr 217 218config USB_YUREX 219 tristate "USB YUREX driver support" 220 help 221 Say Y here if you want to connect a YUREX to your computer's 222 USB port. The YUREX is a leg-shakes sensor. See 223 <http://bbu.kayac.com/en/> for further information. 224 This driver supports read/write of leg-shakes counter and 225 fasync for the counter update via a device file /dev/yurex*. 226 227 To compile this driver as a module, choose M here: the 228 module will be called yurex. 229 230config USB_EZUSB_FX2 231 tristate "Functions for loading firmware on EZUSB chips" 232 help 233 Say Y here if you need EZUSB device support. 234 (Cypress FX/FX2/FX2LP microcontrollers) 235 236config USB_HUB_USB251XB 237 tristate "USB251XB Hub Controller Configuration Driver" 238 depends on I2C 239 help 240 This option enables support for configuration via SMBus of the 241 Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration 242 parameters may be set in devicetree or platform data. 243 Say Y or M here if you need to configure such a device via SMBus. 244 245config USB_HSIC_USB3503 246 tristate "USB3503 HSIC to USB20 Driver" 247 depends on I2C 248 select REGMAP_I2C 249 help 250 This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. 251 252config USB_HSIC_USB4604 253 tristate "USB4604 HSIC to USB20 Driver" 254 depends on I2C 255 help 256 This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. 257 258config USB_LINK_LAYER_TEST 259 tristate "USB Link Layer Test driver" 260 help 261 This driver is for generating specific traffic for Super Speed Link 262 Layer Test Device. Say Y only when you want to conduct USB Super Speed 263 Link Layer Test for host controllers. 264 265config USB_CHAOSKEY 266 tristate "ChaosKey random number generator driver support" 267 depends on HW_RANDOM 268 help 269 Say Y here if you want to connect an AltusMetrum ChaosKey or 270 Araneus Alea I to your computer's USB port. These devices 271 are hardware random number generators which hook into the 272 kernel entropy pool to ensure a large supply of entropy for 273 /dev/random and /dev/urandom and also provides direct access 274 via /dev/chaoskeyX 275 276 To compile this driver as a module, choose M here: the 277 module will be called chaoskey. 278