xref: /linux/drivers/usb/isp1760/isp1760-regs.h (revision 48dea9a700c8728cc31a1dd44588b97578de86ee)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Driver for the NXP ISP1760 chip
4  *
5  * Copyright 2014 Laurent Pinchart
6  * Copyright 2007 Sebastian Siewior
7  *
8  * Contacts:
9  *     Sebastian Siewior <bigeasy@linutronix.de>
10  *     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
11  */
12 
13 #ifndef _ISP1760_REGS_H_
14 #define _ISP1760_REGS_H_
15 
16 /* -----------------------------------------------------------------------------
17  * Host Controller
18  */
19 
20 /* EHCI capability registers */
21 #define HC_CAPLENGTH		0x000
22 #define HC_LENGTH(p)		(((p) >> 00) & 0x00ff)	/* bits 7:0 */
23 #define HC_VERSION(p)		(((p) >> 16) & 0xffff)	/* bits 31:16 */
24 
25 #define HC_HCSPARAMS		0x004
26 #define HCS_INDICATOR(p)	((p) & (1 << 16))	/* true: has port indicators */
27 #define HCS_PPC(p)		((p) & (1 << 4))	/* true: port power control */
28 #define HCS_N_PORTS(p)		(((p) >> 0) & 0xf)	/* bits 3:0, ports on HC */
29 
30 #define HC_HCCPARAMS		0x008
31 #define HCC_ISOC_CACHE(p)       ((p) & (1 << 7))	/* true: can cache isoc frame */
32 #define HCC_ISOC_THRES(p)       (((p) >> 4) & 0x7)	/* bits 6:4, uframes cached */
33 
34 /* EHCI operational registers */
35 #define HC_USBCMD		0x020
36 #define CMD_LRESET		(1 << 7)		/* partial reset (no ports, etc) */
37 #define CMD_RESET		(1 << 1)		/* reset HC not bus */
38 #define CMD_RUN			(1 << 0)		/* start/stop HC */
39 
40 #define HC_USBSTS		0x024
41 #define STS_PCD			(1 << 2)		/* port change detect */
42 
43 #define HC_FRINDEX		0x02c
44 
45 #define HC_CONFIGFLAG		0x060
46 #define FLAG_CF			(1 << 0)		/* true: we'll support "high speed" */
47 
48 #define HC_PORTSC1		0x064
49 #define PORT_OWNER		(1 << 13)		/* true: companion hc owns this port */
50 #define PORT_POWER		(1 << 12)		/* true: has power (see PPC) */
51 #define PORT_USB11(x)		(((x) & (3 << 10)) == (1 << 10))	/* USB 1.1 device */
52 #define PORT_RESET		(1 << 8)		/* reset port */
53 #define PORT_SUSPEND		(1 << 7)		/* suspend port */
54 #define PORT_RESUME		(1 << 6)		/* resume it */
55 #define PORT_PE			(1 << 2)		/* port enable */
56 #define PORT_CSC		(1 << 1)		/* connect status change */
57 #define PORT_CONNECT		(1 << 0)		/* device connected */
58 #define PORT_RWC_BITS		(PORT_CSC)
59 
60 #define HC_ISO_PTD_DONEMAP_REG	0x130
61 #define HC_ISO_PTD_SKIPMAP_REG	0x134
62 #define HC_ISO_PTD_LASTPTD_REG	0x138
63 #define HC_INT_PTD_DONEMAP_REG	0x140
64 #define HC_INT_PTD_SKIPMAP_REG	0x144
65 #define HC_INT_PTD_LASTPTD_REG	0x148
66 #define HC_ATL_PTD_DONEMAP_REG	0x150
67 #define HC_ATL_PTD_SKIPMAP_REG	0x154
68 #define HC_ATL_PTD_LASTPTD_REG	0x158
69 
70 /* Configuration Register */
71 #define HC_HW_MODE_CTRL		0x300
72 #define ALL_ATX_RESET		(1 << 31)
73 #define HW_ANA_DIGI_OC		(1 << 15)
74 #define HW_DEV_DMA		(1 << 11)
75 #define HW_COMN_IRQ		(1 << 10)
76 #define HW_COMN_DMA		(1 << 9)
77 #define HW_DATA_BUS_32BIT	(1 << 8)
78 #define HW_DACK_POL_HIGH	(1 << 6)
79 #define HW_DREQ_POL_HIGH	(1 << 5)
80 #define HW_INTR_HIGH_ACT	(1 << 2)
81 #define HW_INTR_EDGE_TRIG	(1 << 1)
82 #define HW_GLOBAL_INTR_EN	(1 << 0)
83 
84 #define HC_CHIP_ID_REG		0x304
85 #define HC_SCRATCH_REG		0x308
86 
87 #define HC_RESET_REG		0x30c
88 #define SW_RESET_RESET_HC	(1 << 1)
89 #define SW_RESET_RESET_ALL	(1 << 0)
90 
91 #define HC_BUFFER_STATUS_REG	0x334
92 #define ISO_BUF_FILL		(1 << 2)
93 #define INT_BUF_FILL		(1 << 1)
94 #define ATL_BUF_FILL		(1 << 0)
95 
96 #define HC_MEMORY_REG		0x33c
97 #define ISP_BANK(x)		((x) << 16)
98 
99 #define HC_PORT1_CTRL		0x374
100 #define PORT1_POWER		(3 << 3)
101 #define PORT1_INIT1		(1 << 7)
102 #define PORT1_INIT2		(1 << 23)
103 #define HW_OTG_CTRL_SET		0x374
104 #define HW_OTG_CTRL_CLR		0x376
105 #define HW_OTG_DISABLE		(1 << 10)
106 #define HW_OTG_SE0_EN		(1 << 9)
107 #define HW_BDIS_ACON_EN		(1 << 8)
108 #define HW_SW_SEL_HC_DC		(1 << 7)
109 #define HW_VBUS_CHRG		(1 << 6)
110 #define HW_VBUS_DISCHRG		(1 << 5)
111 #define HW_VBUS_DRV		(1 << 4)
112 #define HW_SEL_CP_EXT		(1 << 3)
113 #define HW_DM_PULLDOWN		(1 << 2)
114 #define HW_DP_PULLDOWN		(1 << 1)
115 #define HW_DP_PULLUP		(1 << 0)
116 
117 /* Interrupt Register */
118 #define HC_INTERRUPT_REG	0x310
119 
120 #define HC_INTERRUPT_ENABLE	0x314
121 #define HC_ISO_INT		(1 << 9)
122 #define HC_ATL_INT		(1 << 8)
123 #define HC_INTL_INT		(1 << 7)
124 #define HC_EOT_INT		(1 << 3)
125 #define HC_SOT_INT		(1 << 1)
126 #define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
127 
128 #define HC_ISO_IRQ_MASK_OR_REG	0x318
129 #define HC_INT_IRQ_MASK_OR_REG	0x31c
130 #define HC_ATL_IRQ_MASK_OR_REG	0x320
131 #define HC_ISO_IRQ_MASK_AND_REG	0x324
132 #define HC_INT_IRQ_MASK_AND_REG	0x328
133 #define HC_ATL_IRQ_MASK_AND_REG	0x32c
134 
135 /* -----------------------------------------------------------------------------
136  * Peripheral Controller
137  */
138 
139 /* Initialization Registers */
140 #define DC_ADDRESS			0x0200
141 #define DC_DEVEN			(1 << 7)
142 
143 #define DC_MODE				0x020c
144 #define DC_DMACLKON			(1 << 9)
145 #define DC_VBUSSTAT			(1 << 8)
146 #define DC_CLKAON			(1 << 7)
147 #define DC_SNDRSU			(1 << 6)
148 #define DC_GOSUSP			(1 << 5)
149 #define DC_SFRESET			(1 << 4)
150 #define DC_GLINTENA			(1 << 3)
151 #define DC_WKUPCS			(1 << 2)
152 
153 #define DC_INTCONF			0x0210
154 #define DC_CDBGMOD_ACK_NAK		(0 << 6)
155 #define DC_CDBGMOD_ACK			(1 << 6)
156 #define DC_CDBGMOD_ACK_1NAK		(2 << 6)
157 #define DC_DDBGMODIN_ACK_NAK		(0 << 4)
158 #define DC_DDBGMODIN_ACK		(1 << 4)
159 #define DC_DDBGMODIN_ACK_1NAK		(2 << 4)
160 #define DC_DDBGMODOUT_ACK_NYET_NAK	(0 << 2)
161 #define DC_DDBGMODOUT_ACK_NYET		(1 << 2)
162 #define DC_DDBGMODOUT_ACK_NYET_1NAK	(2 << 2)
163 #define DC_INTLVL			(1 << 1)
164 #define DC_INTPOL			(1 << 0)
165 
166 #define DC_DEBUG			0x0212
167 #define DC_INTENABLE			0x0214
168 #define DC_IEPTX(n)			(1 << (11 + 2 * (n)))
169 #define DC_IEPRX(n)			(1 << (10 + 2 * (n)))
170 #define DC_IEPRXTX(n)			(3 << (10 + 2 * (n)))
171 #define DC_IEP0SETUP			(1 << 8)
172 #define DC_IEVBUS			(1 << 7)
173 #define DC_IEDMA			(1 << 6)
174 #define DC_IEHS_STA			(1 << 5)
175 #define DC_IERESM			(1 << 4)
176 #define DC_IESUSP			(1 << 3)
177 #define DC_IEPSOF			(1 << 2)
178 #define DC_IESOF			(1 << 1)
179 #define DC_IEBRST			(1 << 0)
180 
181 /* Data Flow Registers */
182 #define DC_EPINDEX			0x022c
183 #define DC_EP0SETUP			(1 << 5)
184 #define DC_ENDPIDX(n)			((n) << 1)
185 #define DC_EPDIR			(1 << 0)
186 
187 #define DC_CTRLFUNC			0x0228
188 #define DC_CLBUF			(1 << 4)
189 #define DC_VENDP			(1 << 3)
190 #define DC_DSEN				(1 << 2)
191 #define DC_STATUS			(1 << 1)
192 #define DC_STALL			(1 << 0)
193 
194 #define DC_DATAPORT			0x0220
195 #define DC_BUFLEN			0x021c
196 #define DC_DATACOUNT_MASK		0xffff
197 #define DC_BUFSTAT			0x021e
198 #define DC_EPMAXPKTSZ			0x0204
199 
200 #define DC_EPTYPE			0x0208
201 #define DC_NOEMPKT			(1 << 4)
202 #define DC_EPENABLE			(1 << 3)
203 #define DC_DBLBUF			(1 << 2)
204 #define DC_ENDPTYP_ISOC			(1 << 0)
205 #define DC_ENDPTYP_BULK			(2 << 0)
206 #define DC_ENDPTYP_INTERRUPT		(3 << 0)
207 
208 /* DMA Registers */
209 #define DC_DMACMD			0x0230
210 #define DC_DMATXCOUNT			0x0234
211 #define DC_DMACONF			0x0238
212 #define DC_DMAHW			0x023c
213 #define DC_DMAINTREASON			0x0250
214 #define DC_DMAINTEN			0x0254
215 #define DC_DMAEP			0x0258
216 #define DC_DMABURSTCOUNT		0x0264
217 
218 /* General Registers */
219 #define DC_INTERRUPT			0x0218
220 #define DC_CHIPID			0x0270
221 #define DC_FRAMENUM			0x0274
222 #define DC_SCRATCH			0x0278
223 #define DC_UNLOCKDEV			0x027c
224 #define DC_INTPULSEWIDTH		0x0280
225 #define DC_TESTMODE			0x0284
226 
227 #endif
228