xref: /linux/drivers/usb/host/xhci-plat.c (revision e6a901a00822659181c93c86d8bbc2a17779fddc)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4  *
5  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
6  * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7  *
8  * A lot of code borrowed from the Linux xHCI driver.
9  */
10 
11 #include <linux/clk.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/usb/phy.h>
19 #include <linux/slab.h>
20 #include <linux/acpi.h>
21 #include <linux/usb/of.h>
22 #include <linux/reset.h>
23 
24 #include "xhci.h"
25 #include "xhci-plat.h"
26 #include "xhci-mvebu.h"
27 
28 static struct hc_driver __read_mostly xhci_plat_hc_driver;
29 
30 static int xhci_plat_setup(struct usb_hcd *hcd);
31 static int xhci_plat_start(struct usb_hcd *hcd);
32 
33 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
34 	.extra_priv_size = sizeof(struct xhci_plat_priv),
35 	.reset = xhci_plat_setup,
36 	.start = xhci_plat_start,
37 };
38 
39 static void xhci_priv_plat_start(struct usb_hcd *hcd)
40 {
41 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
42 
43 	if (priv->plat_start)
44 		priv->plat_start(hcd);
45 }
46 
47 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
48 {
49 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
50 
51 	if (!priv->init_quirk)
52 		return 0;
53 
54 	return priv->init_quirk(hcd);
55 }
56 
57 static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
58 {
59 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
60 
61 	if (!priv->suspend_quirk)
62 		return 0;
63 
64 	return priv->suspend_quirk(hcd);
65 }
66 
67 static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
68 {
69 	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
70 
71 	if (!priv->resume_quirk)
72 		return 0;
73 
74 	return priv->resume_quirk(hcd);
75 }
76 
77 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
78 {
79 	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
80 
81 	xhci->quirks |= priv->quirks;
82 }
83 
84 /* called during probe() after chip reset completes */
85 static int xhci_plat_setup(struct usb_hcd *hcd)
86 {
87 	int ret;
88 
89 
90 	ret = xhci_priv_init_quirk(hcd);
91 	if (ret)
92 		return ret;
93 
94 	return xhci_gen_setup(hcd, xhci_plat_quirks);
95 }
96 
97 static int xhci_plat_start(struct usb_hcd *hcd)
98 {
99 	xhci_priv_plat_start(hcd);
100 	return xhci_run(hcd);
101 }
102 
103 #ifdef CONFIG_OF
104 static const struct xhci_plat_priv xhci_plat_marvell_armada = {
105 	.init_quirk = xhci_mvebu_mbus_init_quirk,
106 };
107 
108 static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
109 	.init_quirk = xhci_mvebu_a3700_init_quirk,
110 };
111 
112 static const struct xhci_plat_priv xhci_plat_brcm = {
113 	.quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS,
114 };
115 
116 static const struct of_device_id usb_xhci_of_match[] = {
117 	{
118 		.compatible = "generic-xhci",
119 	}, {
120 		.compatible = "xhci-platform",
121 	}, {
122 		.compatible = "marvell,armada-375-xhci",
123 		.data = &xhci_plat_marvell_armada,
124 	}, {
125 		.compatible = "marvell,armada-380-xhci",
126 		.data = &xhci_plat_marvell_armada,
127 	}, {
128 		.compatible = "marvell,armada3700-xhci",
129 		.data = &xhci_plat_marvell_armada3700,
130 	}, {
131 		.compatible = "brcm,xhci-brcm-v2",
132 		.data = &xhci_plat_brcm,
133 	}, {
134 		.compatible = "brcm,bcm2711-xhci",
135 		.data = &xhci_plat_brcm,
136 	}, {
137 		.compatible = "brcm,bcm7445-xhci",
138 		.data = &xhci_plat_brcm,
139 	},
140 	{},
141 };
142 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
143 #endif
144 
145 int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const struct xhci_plat_priv *priv_match)
146 {
147 	const struct hc_driver	*driver;
148 	struct device		*tmpdev;
149 	struct xhci_hcd		*xhci;
150 	struct resource         *res;
151 	struct usb_hcd		*hcd, *usb3_hcd;
152 	int			ret;
153 	int			irq;
154 	struct xhci_plat_priv	*priv = NULL;
155 	bool			of_match;
156 
157 	if (usb_disabled())
158 		return -ENODEV;
159 
160 	driver = &xhci_plat_hc_driver;
161 
162 	irq = platform_get_irq(pdev, 0);
163 	if (irq < 0)
164 		return irq;
165 
166 	if (!sysdev)
167 		sysdev = &pdev->dev;
168 
169 	ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
170 	if (ret)
171 		return ret;
172 
173 	pm_runtime_set_active(&pdev->dev);
174 	pm_runtime_enable(&pdev->dev);
175 	pm_runtime_get_noresume(&pdev->dev);
176 
177 	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
178 			       dev_name(&pdev->dev), NULL);
179 	if (!hcd) {
180 		ret = -ENOMEM;
181 		goto disable_runtime;
182 	}
183 
184 	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
185 	if (IS_ERR(hcd->regs)) {
186 		ret = PTR_ERR(hcd->regs);
187 		goto put_hcd;
188 	}
189 
190 	hcd->rsrc_start = res->start;
191 	hcd->rsrc_len = resource_size(res);
192 
193 	xhci = hcd_to_xhci(hcd);
194 
195 	xhci->allow_single_roothub = 1;
196 
197 	/*
198 	 * Not all platforms have clks so it is not an error if the
199 	 * clock do not exist.
200 	 */
201 	xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
202 	if (IS_ERR(xhci->reg_clk)) {
203 		ret = PTR_ERR(xhci->reg_clk);
204 		goto put_hcd;
205 	}
206 
207 	xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
208 	if (IS_ERR(xhci->clk)) {
209 		ret = PTR_ERR(xhci->clk);
210 		goto put_hcd;
211 	}
212 
213 	xhci->reset = devm_reset_control_array_get_optional_shared(&pdev->dev);
214 	if (IS_ERR(xhci->reset)) {
215 		ret = PTR_ERR(xhci->reset);
216 		goto put_hcd;
217 	}
218 
219 	ret = reset_control_deassert(xhci->reset);
220 	if (ret)
221 		goto put_hcd;
222 
223 	ret = clk_prepare_enable(xhci->reg_clk);
224 	if (ret)
225 		goto err_reset;
226 
227 	ret = clk_prepare_enable(xhci->clk);
228 	if (ret)
229 		goto disable_reg_clk;
230 
231 	if (priv_match) {
232 		priv = hcd_to_xhci_priv(hcd);
233 		/* Just copy data for now */
234 		*priv = *priv_match;
235 	}
236 
237 	device_set_wakeup_capable(&pdev->dev, true);
238 
239 	xhci->main_hcd = hcd;
240 
241 	/* imod_interval is the interrupt moderation value in nanoseconds. */
242 	xhci->imod_interval = 40000;
243 
244 	/* Iterate over all parent nodes for finding quirks */
245 	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
246 
247 		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
248 			xhci->quirks |= XHCI_HW_LPM_DISABLE;
249 
250 		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
251 			xhci->quirks |= XHCI_LPM_SUPPORT;
252 
253 		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
254 			xhci->quirks |= XHCI_BROKEN_PORT_PED;
255 
256 		if (device_property_read_bool(tmpdev, "xhci-sg-trb-cache-size-quirk"))
257 			xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
258 
259 		device_property_read_u32(tmpdev, "imod-interval-ns",
260 					 &xhci->imod_interval);
261 	}
262 
263 	/*
264 	 * Drivers such as dwc3 manages PHYs themself (and rely on driver name
265 	 * matching for the xhci platform device).
266 	 */
267 	of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
268 	if (of_match) {
269 		hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
270 		if (IS_ERR(hcd->usb_phy)) {
271 			ret = PTR_ERR(hcd->usb_phy);
272 			if (ret == -EPROBE_DEFER)
273 				goto disable_clk;
274 			hcd->usb_phy = NULL;
275 		} else {
276 			ret = usb_phy_init(hcd->usb_phy);
277 			if (ret)
278 				goto disable_clk;
279 		}
280 	}
281 
282 	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
283 
284 	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
285 		hcd->skip_phy_initialization = 1;
286 
287 	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
288 		xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
289 
290 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
291 	if (ret)
292 		goto disable_usb_phy;
293 
294 	if (!xhci_has_one_roothub(xhci)) {
295 		xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
296 						    dev_name(&pdev->dev), hcd);
297 		if (!xhci->shared_hcd) {
298 			ret = -ENOMEM;
299 			goto dealloc_usb2_hcd;
300 		}
301 
302 		if (of_match) {
303 			xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev,
304 										"usb-phy", 1);
305 			if (IS_ERR(xhci->shared_hcd->usb_phy)) {
306 				xhci->shared_hcd->usb_phy = NULL;
307 			} else {
308 				ret = usb_phy_init(xhci->shared_hcd->usb_phy);
309 				if (ret)
310 					dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n",
311 						__func__, ret);
312 			}
313 		}
314 
315 		xhci->shared_hcd->tpl_support = hcd->tpl_support;
316 	}
317 
318 	usb3_hcd = xhci_get_usb3_hcd(xhci);
319 	if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4)
320 		usb3_hcd->can_do_streams = 1;
321 
322 	if (xhci->shared_hcd) {
323 		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
324 		if (ret)
325 			goto put_usb3_hcd;
326 	}
327 
328 	device_enable_async_suspend(&pdev->dev);
329 	pm_runtime_put_noidle(&pdev->dev);
330 
331 	/*
332 	 * Prevent runtime pm from being on as default, users should enable
333 	 * runtime pm using power/control in sysfs.
334 	 */
335 	pm_runtime_forbid(&pdev->dev);
336 
337 	return 0;
338 
339 
340 put_usb3_hcd:
341 	usb_put_hcd(xhci->shared_hcd);
342 
343 dealloc_usb2_hcd:
344 	usb_remove_hcd(hcd);
345 
346 disable_usb_phy:
347 	usb_phy_shutdown(hcd->usb_phy);
348 
349 disable_clk:
350 	clk_disable_unprepare(xhci->clk);
351 
352 disable_reg_clk:
353 	clk_disable_unprepare(xhci->reg_clk);
354 
355 err_reset:
356 	reset_control_assert(xhci->reset);
357 
358 put_hcd:
359 	usb_put_hcd(hcd);
360 
361 disable_runtime:
362 	pm_runtime_put_noidle(&pdev->dev);
363 	pm_runtime_disable(&pdev->dev);
364 
365 	return ret;
366 }
367 EXPORT_SYMBOL_GPL(xhci_plat_probe);
368 
369 static int xhci_generic_plat_probe(struct platform_device *pdev)
370 {
371 	const struct xhci_plat_priv *priv_match;
372 	struct device *sysdev;
373 	int ret;
374 
375 	/*
376 	 * sysdev must point to a device that is known to the system firmware
377 	 * or PCI hardware. We handle these three cases here:
378 	 * 1. xhci_plat comes from firmware
379 	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
380 	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
381 	 */
382 	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
383 		if (is_of_node(sysdev->fwnode) ||
384 			is_acpi_device_node(sysdev->fwnode))
385 			break;
386 		else if (dev_is_pci(sysdev))
387 			break;
388 	}
389 
390 	if (!sysdev)
391 		sysdev = &pdev->dev;
392 
393 	if (WARN_ON(!sysdev->dma_mask)) {
394 		/* Platform did not initialize dma_mask */
395 		ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
396 		if (ret)
397 			return ret;
398 	}
399 
400 	if (pdev->dev.of_node)
401 		priv_match = of_device_get_match_data(&pdev->dev);
402 	else
403 		priv_match = dev_get_platdata(&pdev->dev);
404 
405 	return xhci_plat_probe(pdev, sysdev, priv_match);
406 }
407 
408 void xhci_plat_remove(struct platform_device *dev)
409 {
410 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
411 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
412 	struct clk *clk = xhci->clk;
413 	struct clk *reg_clk = xhci->reg_clk;
414 	struct usb_hcd *shared_hcd = xhci->shared_hcd;
415 
416 	xhci->xhc_state |= XHCI_STATE_REMOVING;
417 	pm_runtime_get_sync(&dev->dev);
418 
419 	if (shared_hcd) {
420 		usb_remove_hcd(shared_hcd);
421 		xhci->shared_hcd = NULL;
422 	}
423 
424 	usb_phy_shutdown(hcd->usb_phy);
425 
426 	usb_remove_hcd(hcd);
427 
428 	if (shared_hcd)
429 		usb_put_hcd(shared_hcd);
430 
431 	clk_disable_unprepare(clk);
432 	clk_disable_unprepare(reg_clk);
433 	reset_control_assert(xhci->reset);
434 	usb_put_hcd(hcd);
435 
436 	pm_runtime_disable(&dev->dev);
437 	pm_runtime_put_noidle(&dev->dev);
438 	pm_runtime_set_suspended(&dev->dev);
439 }
440 EXPORT_SYMBOL_GPL(xhci_plat_remove);
441 
442 static int xhci_plat_suspend(struct device *dev)
443 {
444 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
445 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
446 	int ret;
447 
448 	if (pm_runtime_suspended(dev))
449 		pm_runtime_resume(dev);
450 
451 	ret = xhci_priv_suspend_quirk(hcd);
452 	if (ret)
453 		return ret;
454 	/*
455 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
456 	 * to do wakeup during suspend.
457 	 */
458 	ret = xhci_suspend(xhci, device_may_wakeup(dev));
459 	if (ret)
460 		return ret;
461 
462 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
463 		clk_disable_unprepare(xhci->clk);
464 		clk_disable_unprepare(xhci->reg_clk);
465 	}
466 
467 	return 0;
468 }
469 
470 static int xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
471 {
472 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
473 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
474 	int ret;
475 
476 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
477 		ret = clk_prepare_enable(xhci->clk);
478 		if (ret)
479 			return ret;
480 
481 		ret = clk_prepare_enable(xhci->reg_clk);
482 		if (ret) {
483 			clk_disable_unprepare(xhci->clk);
484 			return ret;
485 		}
486 	}
487 
488 	ret = xhci_priv_resume_quirk(hcd);
489 	if (ret)
490 		goto disable_clks;
491 
492 	ret = xhci_resume(xhci, pmsg);
493 	if (ret)
494 		goto disable_clks;
495 
496 	pm_runtime_disable(dev);
497 	pm_runtime_set_active(dev);
498 	pm_runtime_enable(dev);
499 
500 	return 0;
501 
502 disable_clks:
503 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
504 		clk_disable_unprepare(xhci->clk);
505 		clk_disable_unprepare(xhci->reg_clk);
506 	}
507 
508 	return ret;
509 }
510 
511 static int xhci_plat_resume(struct device *dev)
512 {
513 	return xhci_plat_resume_common(dev, PMSG_RESUME);
514 }
515 
516 static int xhci_plat_restore(struct device *dev)
517 {
518 	return xhci_plat_resume_common(dev, PMSG_RESTORE);
519 }
520 
521 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
522 {
523 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
524 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
525 	int ret;
526 
527 	ret = xhci_priv_suspend_quirk(hcd);
528 	if (ret)
529 		return ret;
530 
531 	return xhci_suspend(xhci, true);
532 }
533 
534 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
535 {
536 	struct usb_hcd  *hcd = dev_get_drvdata(dev);
537 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
538 
539 	return xhci_resume(xhci, PMSG_AUTO_RESUME);
540 }
541 
542 const struct dev_pm_ops xhci_plat_pm_ops = {
543 	.suspend = pm_sleep_ptr(xhci_plat_suspend),
544 	.resume = pm_sleep_ptr(xhci_plat_resume),
545 	.freeze = pm_sleep_ptr(xhci_plat_suspend),
546 	.thaw = pm_sleep_ptr(xhci_plat_resume),
547 	.poweroff = pm_sleep_ptr(xhci_plat_suspend),
548 	.restore = pm_sleep_ptr(xhci_plat_restore),
549 
550 	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
551 			   xhci_plat_runtime_resume,
552 			   NULL)
553 };
554 EXPORT_SYMBOL_GPL(xhci_plat_pm_ops);
555 
556 #ifdef CONFIG_ACPI
557 static const struct acpi_device_id usb_xhci_acpi_match[] = {
558 	/* XHCI-compliant USB Controller */
559 	{ "PNP0D10", },
560 	{ }
561 };
562 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
563 #endif
564 
565 static struct platform_driver usb_generic_xhci_driver = {
566 	.probe	= xhci_generic_plat_probe,
567 	.remove_new = xhci_plat_remove,
568 	.shutdown = usb_hcd_platform_shutdown,
569 	.driver	= {
570 		.name = "xhci-hcd",
571 		.pm = &xhci_plat_pm_ops,
572 		.of_match_table = of_match_ptr(usb_xhci_of_match),
573 		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
574 	},
575 };
576 MODULE_ALIAS("platform:xhci-hcd");
577 
578 static int __init xhci_plat_init(void)
579 {
580 	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
581 	return platform_driver_register(&usb_generic_xhci_driver);
582 }
583 module_init(xhci_plat_init);
584 
585 static void __exit xhci_plat_exit(void)
586 {
587 	platform_driver_unregister(&usb_generic_xhci_driver);
588 }
589 module_exit(xhci_plat_exit);
590 
591 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
592 MODULE_LICENSE("GPL");
593