1 /* 2 * xHCI host controller driver PCI Bus Glue. 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/pci.h> 24 25 #include "xhci.h" 26 27 /* Device for a quirk */ 28 #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 29 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 30 31 static const char hcd_name[] = "xhci_hcd"; 32 33 /* called after powerup, by probe or system-pm "wakeup" */ 34 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) 35 { 36 /* 37 * TODO: Implement finding debug ports later. 38 * TODO: see if there are any quirks that need to be added to handle 39 * new extended capabilities. 40 */ 41 42 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 43 if (!pci_set_mwi(pdev)) 44 xhci_dbg(xhci, "MWI active\n"); 45 46 xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); 47 return 0; 48 } 49 50 /* called during probe() after chip reset completes */ 51 static int xhci_pci_setup(struct usb_hcd *hcd) 52 { 53 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 54 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 55 int retval; 56 u32 temp; 57 58 hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; 59 60 xhci->cap_regs = hcd->regs; 61 xhci->op_regs = hcd->regs + 62 HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase)); 63 xhci->run_regs = hcd->regs + 64 (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK); 65 /* Cache read-only capability registers */ 66 xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1); 67 xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2); 68 xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); 69 xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); 70 xhci->hci_version = HC_VERSION(xhci->hcc_params); 71 xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params); 72 xhci_print_registers(xhci); 73 74 /* Look for vendor-specific quirks */ 75 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && 76 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && 77 pdev->revision == 0x0) { 78 xhci->quirks |= XHCI_RESET_EP_QUIRK; 79 xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" 80 " endpoint cmd after reset endpoint\n"); 81 } 82 if (pdev->vendor == PCI_VENDOR_ID_NEC) 83 xhci->quirks |= XHCI_NEC_HOST; 84 85 /* Make sure the HC is halted. */ 86 retval = xhci_halt(xhci); 87 if (retval) 88 return retval; 89 90 xhci_dbg(xhci, "Resetting HCD\n"); 91 /* Reset the internal HC memory state and registers. */ 92 retval = xhci_reset(xhci); 93 if (retval) 94 return retval; 95 xhci_dbg(xhci, "Reset complete\n"); 96 97 temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); 98 if (HCC_64BIT_ADDR(temp)) { 99 xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); 100 dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); 101 } else { 102 dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); 103 } 104 105 xhci_dbg(xhci, "Calling HCD init\n"); 106 /* Initialize HCD and host controller data structures. */ 107 retval = xhci_init(hcd); 108 if (retval) 109 return retval; 110 xhci_dbg(xhci, "Called HCD init\n"); 111 112 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); 113 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); 114 115 /* Find any debug ports */ 116 return xhci_pci_reinit(xhci, pdev); 117 } 118 119 static const struct hc_driver xhci_pci_hc_driver = { 120 .description = hcd_name, 121 .product_desc = "xHCI Host Controller", 122 .hcd_priv_size = sizeof(struct xhci_hcd), 123 124 /* 125 * generic hardware linkage 126 */ 127 .irq = xhci_irq, 128 .flags = HCD_MEMORY | HCD_USB3, 129 130 /* 131 * basic lifecycle operations 132 */ 133 .reset = xhci_pci_setup, 134 .start = xhci_run, 135 /* suspend and resume implemented later */ 136 .stop = xhci_stop, 137 .shutdown = xhci_shutdown, 138 139 /* 140 * managing i/o requests and associated device resources 141 */ 142 .urb_enqueue = xhci_urb_enqueue, 143 .urb_dequeue = xhci_urb_dequeue, 144 .alloc_dev = xhci_alloc_dev, 145 .free_dev = xhci_free_dev, 146 .alloc_streams = xhci_alloc_streams, 147 .free_streams = xhci_free_streams, 148 .add_endpoint = xhci_add_endpoint, 149 .drop_endpoint = xhci_drop_endpoint, 150 .endpoint_reset = xhci_endpoint_reset, 151 .check_bandwidth = xhci_check_bandwidth, 152 .reset_bandwidth = xhci_reset_bandwidth, 153 .address_device = xhci_address_device, 154 .update_hub_device = xhci_update_hub_device, 155 .reset_device = xhci_reset_device, 156 157 /* 158 * scheduling support 159 */ 160 .get_frame_number = xhci_get_frame, 161 162 /* Root hub support */ 163 .hub_control = xhci_hub_control, 164 .hub_status_data = xhci_hub_status_data, 165 }; 166 167 /*-------------------------------------------------------------------------*/ 168 169 /* PCI driver selection metadata; PCI hotplugging uses this */ 170 static const struct pci_device_id pci_ids[] = { { 171 /* handle any USB 3.0 xHCI controller */ 172 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), 173 .driver_data = (unsigned long) &xhci_pci_hc_driver, 174 }, 175 { /* end: all zeroes */ } 176 }; 177 MODULE_DEVICE_TABLE(pci, pci_ids); 178 179 /* pci driver glue; this is a "new style" PCI driver module */ 180 static struct pci_driver xhci_pci_driver = { 181 .name = (char *) hcd_name, 182 .id_table = pci_ids, 183 184 .probe = usb_hcd_pci_probe, 185 .remove = usb_hcd_pci_remove, 186 /* suspend and resume implemented later */ 187 188 .shutdown = usb_hcd_pci_shutdown, 189 }; 190 191 int xhci_register_pci(void) 192 { 193 return pci_register_driver(&xhci_pci_driver); 194 } 195 196 void xhci_unregister_pci(void) 197 { 198 pci_unregister_driver(&xhci_pci_driver); 199 } 200