1 /* 2 * xHCI host controller driver 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/gfp.h> 24 #include <asm/unaligned.h> 25 26 #include "xhci.h" 27 #include "xhci-trace.h" 28 29 #define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) 30 #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ 31 PORT_RC | PORT_PLC | PORT_PE) 32 33 /* USB 3.0 BOS descriptor and a capability descriptor, combined */ 34 static u8 usb_bos_descriptor [] = { 35 USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */ 36 USB_DT_BOS, /* __u8 bDescriptorType */ 37 0x0F, 0x00, /* __le16 wTotalLength, 15 bytes */ 38 0x1, /* __u8 bNumDeviceCaps */ 39 /* First device capability */ 40 USB_DT_USB_SS_CAP_SIZE, /* __u8 bLength, 10 bytes */ 41 USB_DT_DEVICE_CAPABILITY, /* Device Capability */ 42 USB_SS_CAP_TYPE, /* bDevCapabilityType, SUPERSPEED_USB */ 43 0x00, /* bmAttributes, LTM off by default */ 44 USB_5GBPS_OPERATION, 0x00, /* wSpeedsSupported, 5Gbps only */ 45 0x03, /* bFunctionalitySupport, 46 USB 3.0 speed only */ 47 0x00, /* bU1DevExitLat, set later. */ 48 0x00, 0x00 /* __le16 bU2DevExitLat, set later. */ 49 }; 50 51 52 static void xhci_common_hub_descriptor(struct xhci_hcd *xhci, 53 struct usb_hub_descriptor *desc, int ports) 54 { 55 u16 temp; 56 57 desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */ 58 desc->bHubContrCurrent = 0; 59 60 desc->bNbrPorts = ports; 61 temp = 0; 62 /* Bits 1:0 - support per-port power switching, or power always on */ 63 if (HCC_PPC(xhci->hcc_params)) 64 temp |= HUB_CHAR_INDV_PORT_LPSM; 65 else 66 temp |= HUB_CHAR_NO_LPSM; 67 /* Bit 2 - root hubs are not part of a compound device */ 68 /* Bits 4:3 - individual port over current protection */ 69 temp |= HUB_CHAR_INDV_PORT_OCPM; 70 /* Bits 6:5 - no TTs in root ports */ 71 /* Bit 7 - no port indicators */ 72 desc->wHubCharacteristics = cpu_to_le16(temp); 73 } 74 75 /* Fill in the USB 2.0 roothub descriptor */ 76 static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, 77 struct usb_hub_descriptor *desc) 78 { 79 int ports; 80 u16 temp; 81 __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; 82 u32 portsc; 83 unsigned int i; 84 85 ports = xhci->num_usb2_ports; 86 87 xhci_common_hub_descriptor(xhci, desc, ports); 88 desc->bDescriptorType = USB_DT_HUB; 89 temp = 1 + (ports / 8); 90 desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp; 91 92 /* The Device Removable bits are reported on a byte granularity. 93 * If the port doesn't exist within that byte, the bit is set to 0. 94 */ 95 memset(port_removable, 0, sizeof(port_removable)); 96 for (i = 0; i < ports; i++) { 97 portsc = xhci_readl(xhci, xhci->usb2_ports[i]); 98 /* If a device is removable, PORTSC reports a 0, same as in the 99 * hub descriptor DeviceRemovable bits. 100 */ 101 if (portsc & PORT_DEV_REMOVE) 102 /* This math is hairy because bit 0 of DeviceRemovable 103 * is reserved, and bit 1 is for port 1, etc. 104 */ 105 port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8); 106 } 107 108 /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN 109 * ports on it. The USB 2.0 specification says that there are two 110 * variable length fields at the end of the hub descriptor: 111 * DeviceRemovable and PortPwrCtrlMask. But since we can have less than 112 * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array 113 * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to 114 * 0xFF, so we initialize the both arrays (DeviceRemovable and 115 * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each 116 * set of ports that actually exist. 117 */ 118 memset(desc->u.hs.DeviceRemovable, 0xff, 119 sizeof(desc->u.hs.DeviceRemovable)); 120 memset(desc->u.hs.PortPwrCtrlMask, 0xff, 121 sizeof(desc->u.hs.PortPwrCtrlMask)); 122 123 for (i = 0; i < (ports + 1 + 7) / 8; i++) 124 memset(&desc->u.hs.DeviceRemovable[i], port_removable[i], 125 sizeof(__u8)); 126 } 127 128 /* Fill in the USB 3.0 roothub descriptor */ 129 static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, 130 struct usb_hub_descriptor *desc) 131 { 132 int ports; 133 u16 port_removable; 134 u32 portsc; 135 unsigned int i; 136 137 ports = xhci->num_usb3_ports; 138 xhci_common_hub_descriptor(xhci, desc, ports); 139 desc->bDescriptorType = USB_DT_SS_HUB; 140 desc->bDescLength = USB_DT_SS_HUB_SIZE; 141 142 /* header decode latency should be zero for roothubs, 143 * see section 4.23.5.2. 144 */ 145 desc->u.ss.bHubHdrDecLat = 0; 146 desc->u.ss.wHubDelay = 0; 147 148 port_removable = 0; 149 /* bit 0 is reserved, bit 1 is for port 1, etc. */ 150 for (i = 0; i < ports; i++) { 151 portsc = xhci_readl(xhci, xhci->usb3_ports[i]); 152 if (portsc & PORT_DEV_REMOVE) 153 port_removable |= 1 << (i + 1); 154 } 155 156 desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); 157 } 158 159 static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, 160 struct usb_hub_descriptor *desc) 161 { 162 163 if (hcd->speed == HCD_USB3) 164 xhci_usb3_hub_descriptor(hcd, xhci, desc); 165 else 166 xhci_usb2_hub_descriptor(hcd, xhci, desc); 167 168 } 169 170 static unsigned int xhci_port_speed(unsigned int port_status) 171 { 172 if (DEV_LOWSPEED(port_status)) 173 return USB_PORT_STAT_LOW_SPEED; 174 if (DEV_HIGHSPEED(port_status)) 175 return USB_PORT_STAT_HIGH_SPEED; 176 /* 177 * FIXME: Yes, we should check for full speed, but the core uses that as 178 * a default in portspeed() in usb/core/hub.c (which is the only place 179 * USB_PORT_STAT_*_SPEED is used). 180 */ 181 return 0; 182 } 183 184 /* 185 * These bits are Read Only (RO) and should be saved and written to the 186 * registers: 0, 3, 10:13, 30 187 * connect status, over-current status, port speed, and device removable. 188 * connect status and port speed are also sticky - meaning they're in 189 * the AUX well and they aren't changed by a hot, warm, or cold reset. 190 */ 191 #define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30)) 192 /* 193 * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit: 194 * bits 5:8, 9, 14:15, 25:27 195 * link state, port power, port indicator state, "wake on" enable state 196 */ 197 #define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25)) 198 /* 199 * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect: 200 * bit 4 (port reset) 201 */ 202 #define XHCI_PORT_RW1S ((1<<4)) 203 /* 204 * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect: 205 * bits 1, 17, 18, 19, 20, 21, 22, 23 206 * port enable/disable, and 207 * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports), 208 * over-current, reset, link state, and L1 change 209 */ 210 #define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17)) 211 /* 212 * Bit 16 is RW, and writing a '1' to it causes the link state control to be 213 * latched in 214 */ 215 #define XHCI_PORT_RW ((1<<16)) 216 /* 217 * These bits are Reserved Zero (RsvdZ) and zero should be written to them: 218 * bits 2, 24, 28:31 219 */ 220 #define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28)) 221 222 /* 223 * Given a port state, this function returns a value that would result in the 224 * port being in the same state, if the value was written to the port status 225 * control register. 226 * Save Read Only (RO) bits and save read/write bits where 227 * writing a 0 clears the bit and writing a 1 sets the bit (RWS). 228 * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect. 229 */ 230 u32 xhci_port_state_to_neutral(u32 state) 231 { 232 /* Save read-only status and port state */ 233 return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); 234 } 235 236 /* 237 * find slot id based on port number. 238 * @port: The one-based port number from one of the two split roothubs. 239 */ 240 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, 241 u16 port) 242 { 243 int slot_id; 244 int i; 245 enum usb_device_speed speed; 246 247 slot_id = 0; 248 for (i = 0; i < MAX_HC_SLOTS; i++) { 249 if (!xhci->devs[i]) 250 continue; 251 speed = xhci->devs[i]->udev->speed; 252 if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3)) 253 && xhci->devs[i]->fake_port == port) { 254 slot_id = i; 255 break; 256 } 257 } 258 259 return slot_id; 260 } 261 262 /* 263 * Stop device 264 * It issues stop endpoint command for EP 0 to 30. And wait the last command 265 * to complete. 266 * suspend will set to 1, if suspend bit need to set in command. 267 */ 268 static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) 269 { 270 struct xhci_virt_device *virt_dev; 271 struct xhci_command *cmd; 272 unsigned long flags; 273 int timeleft; 274 int ret; 275 int i; 276 277 ret = 0; 278 virt_dev = xhci->devs[slot_id]; 279 cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); 280 if (!cmd) { 281 xhci_dbg(xhci, "Couldn't allocate command structure.\n"); 282 return -ENOMEM; 283 } 284 285 spin_lock_irqsave(&xhci->lock, flags); 286 for (i = LAST_EP_INDEX; i > 0; i--) { 287 if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) 288 xhci_queue_stop_endpoint(xhci, slot_id, i, suspend); 289 } 290 cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); 291 list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); 292 xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend); 293 xhci_ring_cmd_db(xhci); 294 spin_unlock_irqrestore(&xhci->lock, flags); 295 296 /* Wait for last stop endpoint command to finish */ 297 timeleft = wait_for_completion_interruptible_timeout( 298 cmd->completion, 299 XHCI_CMD_DEFAULT_TIMEOUT); 300 if (timeleft <= 0) { 301 xhci_warn(xhci, "%s while waiting for stop endpoint command\n", 302 timeleft == 0 ? "Timeout" : "Signal"); 303 spin_lock_irqsave(&xhci->lock, flags); 304 /* The timeout might have raced with the event ring handler, so 305 * only delete from the list if the item isn't poisoned. 306 */ 307 if (cmd->cmd_list.next != LIST_POISON1) 308 list_del(&cmd->cmd_list); 309 spin_unlock_irqrestore(&xhci->lock, flags); 310 ret = -ETIME; 311 goto command_cleanup; 312 } 313 314 command_cleanup: 315 xhci_free_command(xhci, cmd); 316 return ret; 317 } 318 319 /* 320 * Ring device, it rings the all doorbells unconditionally. 321 */ 322 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) 323 { 324 int i; 325 326 for (i = 0; i < LAST_EP_INDEX + 1; i++) 327 if (xhci->devs[slot_id]->eps[i].ring && 328 xhci->devs[slot_id]->eps[i].ring->dequeue) 329 xhci_ring_ep_doorbell(xhci, slot_id, i, 0); 330 331 return; 332 } 333 334 static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, 335 u16 wIndex, __le32 __iomem *addr, u32 port_status) 336 { 337 /* Don't allow the USB core to disable SuperSpeed ports. */ 338 if (hcd->speed == HCD_USB3) { 339 xhci_dbg(xhci, "Ignoring request to disable " 340 "SuperSpeed port.\n"); 341 return; 342 } 343 344 /* Write 1 to disable the port */ 345 xhci_writel(xhci, port_status | PORT_PE, addr); 346 port_status = xhci_readl(xhci, addr); 347 xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n", 348 wIndex, port_status); 349 } 350 351 static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, 352 u16 wIndex, __le32 __iomem *addr, u32 port_status) 353 { 354 char *port_change_bit; 355 u32 status; 356 357 switch (wValue) { 358 case USB_PORT_FEAT_C_RESET: 359 status = PORT_RC; 360 port_change_bit = "reset"; 361 break; 362 case USB_PORT_FEAT_C_BH_PORT_RESET: 363 status = PORT_WRC; 364 port_change_bit = "warm(BH) reset"; 365 break; 366 case USB_PORT_FEAT_C_CONNECTION: 367 status = PORT_CSC; 368 port_change_bit = "connect"; 369 break; 370 case USB_PORT_FEAT_C_OVER_CURRENT: 371 status = PORT_OCC; 372 port_change_bit = "over-current"; 373 break; 374 case USB_PORT_FEAT_C_ENABLE: 375 status = PORT_PEC; 376 port_change_bit = "enable/disable"; 377 break; 378 case USB_PORT_FEAT_C_SUSPEND: 379 status = PORT_PLC; 380 port_change_bit = "suspend/resume"; 381 break; 382 case USB_PORT_FEAT_C_PORT_LINK_STATE: 383 status = PORT_PLC; 384 port_change_bit = "link state"; 385 break; 386 default: 387 /* Should never happen */ 388 return; 389 } 390 /* Change bits are all write 1 to clear */ 391 xhci_writel(xhci, port_status | status, addr); 392 port_status = xhci_readl(xhci, addr); 393 xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", 394 port_change_bit, wIndex, port_status); 395 } 396 397 static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) 398 { 399 int max_ports; 400 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 401 402 if (hcd->speed == HCD_USB3) { 403 max_ports = xhci->num_usb3_ports; 404 *port_array = xhci->usb3_ports; 405 } else { 406 max_ports = xhci->num_usb2_ports; 407 *port_array = xhci->usb2_ports; 408 } 409 410 return max_ports; 411 } 412 413 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, 414 int port_id, u32 link_state) 415 { 416 u32 temp; 417 418 temp = xhci_readl(xhci, port_array[port_id]); 419 temp = xhci_port_state_to_neutral(temp); 420 temp &= ~PORT_PLS_MASK; 421 temp |= PORT_LINK_STROBE | link_state; 422 xhci_writel(xhci, temp, port_array[port_id]); 423 } 424 425 static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, 426 __le32 __iomem **port_array, int port_id, u16 wake_mask) 427 { 428 u32 temp; 429 430 temp = xhci_readl(xhci, port_array[port_id]); 431 temp = xhci_port_state_to_neutral(temp); 432 433 if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) 434 temp |= PORT_WKCONN_E; 435 else 436 temp &= ~PORT_WKCONN_E; 437 438 if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT) 439 temp |= PORT_WKDISC_E; 440 else 441 temp &= ~PORT_WKDISC_E; 442 443 if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT) 444 temp |= PORT_WKOC_E; 445 else 446 temp &= ~PORT_WKOC_E; 447 448 xhci_writel(xhci, temp, port_array[port_id]); 449 } 450 451 /* Test and clear port RWC bit */ 452 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, 453 int port_id, u32 port_bit) 454 { 455 u32 temp; 456 457 temp = xhci_readl(xhci, port_array[port_id]); 458 if (temp & port_bit) { 459 temp = xhci_port_state_to_neutral(temp); 460 temp |= port_bit; 461 xhci_writel(xhci, temp, port_array[port_id]); 462 } 463 } 464 465 /* Updates Link Status for USB 2.1 port */ 466 static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg) 467 { 468 if ((status_reg & PORT_PLS_MASK) == XDEV_U2) 469 *status |= USB_PORT_STAT_L1; 470 } 471 472 /* Updates Link Status for super Speed port */ 473 static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg) 474 { 475 u32 pls = status_reg & PORT_PLS_MASK; 476 477 /* resume state is a xHCI internal state. 478 * Do not report it to usb core. 479 */ 480 if (pls == XDEV_RESUME) 481 return; 482 483 /* When the CAS bit is set then warm reset 484 * should be performed on port 485 */ 486 if (status_reg & PORT_CAS) { 487 /* The CAS bit can be set while the port is 488 * in any link state. 489 * Only roothubs have CAS bit, so we 490 * pretend to be in compliance mode 491 * unless we're already in compliance 492 * or the inactive state. 493 */ 494 if (pls != USB_SS_PORT_LS_COMP_MOD && 495 pls != USB_SS_PORT_LS_SS_INACTIVE) { 496 pls = USB_SS_PORT_LS_COMP_MOD; 497 } 498 /* Return also connection bit - 499 * hub state machine resets port 500 * when this bit is set. 501 */ 502 pls |= USB_PORT_STAT_CONNECTION; 503 } else { 504 /* 505 * If CAS bit isn't set but the Port is already at 506 * Compliance Mode, fake a connection so the USB core 507 * notices the Compliance state and resets the port. 508 * This resolves an issue generated by the SN65LVPE502CP 509 * in which sometimes the port enters compliance mode 510 * caused by a delay on the host-device negotiation. 511 */ 512 if (pls == USB_SS_PORT_LS_COMP_MOD) 513 pls |= USB_PORT_STAT_CONNECTION; 514 } 515 516 /* update status field */ 517 *status |= pls; 518 } 519 520 /* 521 * Function for Compliance Mode Quirk. 522 * 523 * This Function verifies if all xhc USB3 ports have entered U0, if so, 524 * the compliance mode timer is deleted. A port won't enter 525 * compliance mode if it has previously entered U0. 526 */ 527 static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, 528 u16 wIndex) 529 { 530 u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); 531 bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); 532 533 if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) 534 return; 535 536 if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { 537 xhci->port_status_u0 |= 1 << wIndex; 538 if (xhci->port_status_u0 == all_ports_seen_u0) { 539 del_timer_sync(&xhci->comp_mode_recovery_timer); 540 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 541 "All USB3 ports have entered U0 already!"); 542 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, 543 "Compliance Mode Recovery Timer Deleted."); 544 } 545 } 546 } 547 548 /* 549 * Converts a raw xHCI port status into the format that external USB 2.0 or USB 550 * 3.0 hubs use. 551 * 552 * Possible side effects: 553 * - Mark a port as being done with device resume, 554 * and ring the endpoint doorbells. 555 * - Stop the Synopsys redriver Compliance Mode polling. 556 * - Drop and reacquire the xHCI lock, in order to wait for port resume. 557 */ 558 static u32 xhci_get_port_status(struct usb_hcd *hcd, 559 struct xhci_bus_state *bus_state, 560 __le32 __iomem **port_array, 561 u16 wIndex, u32 raw_port_status, 562 unsigned long flags) 563 __releases(&xhci->lock) 564 __acquires(&xhci->lock) 565 { 566 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 567 u32 status = 0; 568 int slot_id; 569 570 /* wPortChange bits */ 571 if (raw_port_status & PORT_CSC) 572 status |= USB_PORT_STAT_C_CONNECTION << 16; 573 if (raw_port_status & PORT_PEC) 574 status |= USB_PORT_STAT_C_ENABLE << 16; 575 if ((raw_port_status & PORT_OCC)) 576 status |= USB_PORT_STAT_C_OVERCURRENT << 16; 577 if ((raw_port_status & PORT_RC)) 578 status |= USB_PORT_STAT_C_RESET << 16; 579 /* USB3.0 only */ 580 if (hcd->speed == HCD_USB3) { 581 if ((raw_port_status & PORT_PLC)) 582 status |= USB_PORT_STAT_C_LINK_STATE << 16; 583 if ((raw_port_status & PORT_WRC)) 584 status |= USB_PORT_STAT_C_BH_RESET << 16; 585 } 586 587 if (hcd->speed != HCD_USB3) { 588 if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 589 && (raw_port_status & PORT_POWER)) 590 status |= USB_PORT_STAT_SUSPEND; 591 } 592 if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && 593 !DEV_SUPERSPEED(raw_port_status)) { 594 if ((raw_port_status & PORT_RESET) || 595 !(raw_port_status & PORT_PE)) 596 return 0xffffffff; 597 if (time_after_eq(jiffies, 598 bus_state->resume_done[wIndex])) { 599 int time_left; 600 601 xhci_dbg(xhci, "Resume USB2 port %d\n", 602 wIndex + 1); 603 bus_state->resume_done[wIndex] = 0; 604 clear_bit(wIndex, &bus_state->resuming_ports); 605 606 set_bit(wIndex, &bus_state->rexit_ports); 607 xhci_set_link_state(xhci, port_array, wIndex, 608 XDEV_U0); 609 610 spin_unlock_irqrestore(&xhci->lock, flags); 611 time_left = wait_for_completion_timeout( 612 &bus_state->rexit_done[wIndex], 613 msecs_to_jiffies( 614 XHCI_MAX_REXIT_TIMEOUT)); 615 spin_lock_irqsave(&xhci->lock, flags); 616 617 if (time_left) { 618 slot_id = xhci_find_slot_id_by_port(hcd, 619 xhci, wIndex + 1); 620 if (!slot_id) { 621 xhci_dbg(xhci, "slot_id is zero\n"); 622 return 0xffffffff; 623 } 624 xhci_ring_device(xhci, slot_id); 625 } else { 626 int port_status = xhci_readl(xhci, 627 port_array[wIndex]); 628 xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", 629 XHCI_MAX_REXIT_TIMEOUT, 630 port_status); 631 status |= USB_PORT_STAT_SUSPEND; 632 clear_bit(wIndex, &bus_state->rexit_ports); 633 } 634 635 bus_state->port_c_suspend |= 1 << wIndex; 636 bus_state->suspended_ports &= ~(1 << wIndex); 637 } else { 638 /* 639 * The resume has been signaling for less than 640 * 20ms. Report the port status as SUSPEND, 641 * let the usbcore check port status again 642 * and clear resume signaling later. 643 */ 644 status |= USB_PORT_STAT_SUSPEND; 645 } 646 } 647 if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 648 && (raw_port_status & PORT_POWER) 649 && (bus_state->suspended_ports & (1 << wIndex))) { 650 bus_state->suspended_ports &= ~(1 << wIndex); 651 if (hcd->speed != HCD_USB3) 652 bus_state->port_c_suspend |= 1 << wIndex; 653 } 654 if (raw_port_status & PORT_CONNECT) { 655 status |= USB_PORT_STAT_CONNECTION; 656 status |= xhci_port_speed(raw_port_status); 657 } 658 if (raw_port_status & PORT_PE) 659 status |= USB_PORT_STAT_ENABLE; 660 if (raw_port_status & PORT_OC) 661 status |= USB_PORT_STAT_OVERCURRENT; 662 if (raw_port_status & PORT_RESET) 663 status |= USB_PORT_STAT_RESET; 664 if (raw_port_status & PORT_POWER) { 665 if (hcd->speed == HCD_USB3) 666 status |= USB_SS_PORT_STAT_POWER; 667 else 668 status |= USB_PORT_STAT_POWER; 669 } 670 /* Update Port Link State */ 671 if (hcd->speed == HCD_USB3) { 672 xhci_hub_report_usb3_link_state(&status, raw_port_status); 673 /* 674 * Verify if all USB3 Ports Have entered U0 already. 675 * Delete Compliance Mode Timer if so. 676 */ 677 xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex); 678 } else { 679 xhci_hub_report_usb2_link_state(&status, raw_port_status); 680 } 681 if (bus_state->port_c_suspend & (1 << wIndex)) 682 status |= 1 << USB_PORT_FEAT_C_SUSPEND; 683 684 return status; 685 } 686 687 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 688 u16 wIndex, char *buf, u16 wLength) 689 { 690 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 691 int max_ports; 692 unsigned long flags; 693 u32 temp, status; 694 int retval = 0; 695 __le32 __iomem **port_array; 696 int slot_id; 697 struct xhci_bus_state *bus_state; 698 u16 link_state = 0; 699 u16 wake_mask = 0; 700 u16 timeout = 0; 701 702 max_ports = xhci_get_ports(hcd, &port_array); 703 bus_state = &xhci->bus_state[hcd_index(hcd)]; 704 705 spin_lock_irqsave(&xhci->lock, flags); 706 switch (typeReq) { 707 case GetHubStatus: 708 /* No power source, over-current reported per port */ 709 memset(buf, 0, 4); 710 break; 711 case GetHubDescriptor: 712 /* Check to make sure userspace is asking for the USB 3.0 hub 713 * descriptor for the USB 3.0 roothub. If not, we stall the 714 * endpoint, like external hubs do. 715 */ 716 if (hcd->speed == HCD_USB3 && 717 (wLength < USB_DT_SS_HUB_SIZE || 718 wValue != (USB_DT_SS_HUB << 8))) { 719 xhci_dbg(xhci, "Wrong hub descriptor type for " 720 "USB 3.0 roothub.\n"); 721 goto error; 722 } 723 xhci_hub_descriptor(hcd, xhci, 724 (struct usb_hub_descriptor *) buf); 725 break; 726 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 727 if ((wValue & 0xff00) != (USB_DT_BOS << 8)) 728 goto error; 729 730 if (hcd->speed != HCD_USB3) 731 goto error; 732 733 /* Set the U1 and U2 exit latencies. */ 734 memcpy(buf, &usb_bos_descriptor, 735 USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); 736 temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); 737 buf[12] = HCS_U1_LATENCY(temp); 738 put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); 739 740 /* Indicate whether the host has LTM support. */ 741 temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); 742 if (HCC_LTC(temp)) 743 buf[8] |= USB_LTM_SUPPORT; 744 745 spin_unlock_irqrestore(&xhci->lock, flags); 746 return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE; 747 case GetPortStatus: 748 if (!wIndex || wIndex > max_ports) 749 goto error; 750 wIndex--; 751 temp = xhci_readl(xhci, port_array[wIndex]); 752 if (temp == 0xffffffff) { 753 retval = -ENODEV; 754 break; 755 } 756 status = xhci_get_port_status(hcd, bus_state, port_array, 757 wIndex, temp, flags); 758 if (status == 0xffffffff) 759 goto error; 760 761 xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", 762 wIndex, temp); 763 xhci_dbg(xhci, "Get port status returned 0x%x\n", status); 764 765 put_unaligned(cpu_to_le32(status), (__le32 *) buf); 766 break; 767 case SetPortFeature: 768 if (wValue == USB_PORT_FEAT_LINK_STATE) 769 link_state = (wIndex & 0xff00) >> 3; 770 if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) 771 wake_mask = wIndex & 0xff00; 772 /* The MSB of wIndex is the U1/U2 timeout */ 773 timeout = (wIndex & 0xff00) >> 8; 774 wIndex &= 0xff; 775 if (!wIndex || wIndex > max_ports) 776 goto error; 777 wIndex--; 778 temp = xhci_readl(xhci, port_array[wIndex]); 779 if (temp == 0xffffffff) { 780 retval = -ENODEV; 781 break; 782 } 783 temp = xhci_port_state_to_neutral(temp); 784 /* FIXME: What new port features do we need to support? */ 785 switch (wValue) { 786 case USB_PORT_FEAT_SUSPEND: 787 temp = xhci_readl(xhci, port_array[wIndex]); 788 if ((temp & PORT_PLS_MASK) != XDEV_U0) { 789 /* Resume the port to U0 first */ 790 xhci_set_link_state(xhci, port_array, wIndex, 791 XDEV_U0); 792 spin_unlock_irqrestore(&xhci->lock, flags); 793 msleep(10); 794 spin_lock_irqsave(&xhci->lock, flags); 795 } 796 /* In spec software should not attempt to suspend 797 * a port unless the port reports that it is in the 798 * enabled (PED = ‘1’,PLS < ‘3’) state. 799 */ 800 temp = xhci_readl(xhci, port_array[wIndex]); 801 if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) 802 || (temp & PORT_PLS_MASK) >= XDEV_U3) { 803 xhci_warn(xhci, "USB core suspending device " 804 "not in U0/U1/U2.\n"); 805 goto error; 806 } 807 808 slot_id = xhci_find_slot_id_by_port(hcd, xhci, 809 wIndex + 1); 810 if (!slot_id) { 811 xhci_warn(xhci, "slot_id is zero\n"); 812 goto error; 813 } 814 /* unlock to execute stop endpoint commands */ 815 spin_unlock_irqrestore(&xhci->lock, flags); 816 xhci_stop_device(xhci, slot_id, 1); 817 spin_lock_irqsave(&xhci->lock, flags); 818 819 xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3); 820 821 spin_unlock_irqrestore(&xhci->lock, flags); 822 msleep(10); /* wait device to enter */ 823 spin_lock_irqsave(&xhci->lock, flags); 824 825 temp = xhci_readl(xhci, port_array[wIndex]); 826 bus_state->suspended_ports |= 1 << wIndex; 827 break; 828 case USB_PORT_FEAT_LINK_STATE: 829 temp = xhci_readl(xhci, port_array[wIndex]); 830 831 /* Disable port */ 832 if (link_state == USB_SS_PORT_LS_SS_DISABLED) { 833 xhci_dbg(xhci, "Disable port %d\n", wIndex); 834 temp = xhci_port_state_to_neutral(temp); 835 /* 836 * Clear all change bits, so that we get a new 837 * connection event. 838 */ 839 temp |= PORT_CSC | PORT_PEC | PORT_WRC | 840 PORT_OCC | PORT_RC | PORT_PLC | 841 PORT_CEC; 842 xhci_writel(xhci, temp | PORT_PE, 843 port_array[wIndex]); 844 temp = xhci_readl(xhci, port_array[wIndex]); 845 break; 846 } 847 848 /* Put link in RxDetect (enable port) */ 849 if (link_state == USB_SS_PORT_LS_RX_DETECT) { 850 xhci_dbg(xhci, "Enable port %d\n", wIndex); 851 xhci_set_link_state(xhci, port_array, wIndex, 852 link_state); 853 temp = xhci_readl(xhci, port_array[wIndex]); 854 break; 855 } 856 857 /* Software should not attempt to set 858 * port link state above '3' (U3) and the port 859 * must be enabled. 860 */ 861 if ((temp & PORT_PE) == 0 || 862 (link_state > USB_SS_PORT_LS_U3)) { 863 xhci_warn(xhci, "Cannot set link state.\n"); 864 goto error; 865 } 866 867 if (link_state == USB_SS_PORT_LS_U3) { 868 slot_id = xhci_find_slot_id_by_port(hcd, xhci, 869 wIndex + 1); 870 if (slot_id) { 871 /* unlock to execute stop endpoint 872 * commands */ 873 spin_unlock_irqrestore(&xhci->lock, 874 flags); 875 xhci_stop_device(xhci, slot_id, 1); 876 spin_lock_irqsave(&xhci->lock, flags); 877 } 878 } 879 880 xhci_set_link_state(xhci, port_array, wIndex, 881 link_state); 882 883 spin_unlock_irqrestore(&xhci->lock, flags); 884 msleep(20); /* wait device to enter */ 885 spin_lock_irqsave(&xhci->lock, flags); 886 887 temp = xhci_readl(xhci, port_array[wIndex]); 888 if (link_state == USB_SS_PORT_LS_U3) 889 bus_state->suspended_ports |= 1 << wIndex; 890 break; 891 case USB_PORT_FEAT_POWER: 892 /* 893 * Turn on ports, even if there isn't per-port switching. 894 * HC will report connect events even before this is set. 895 * However, khubd will ignore the roothub events until 896 * the roothub is registered. 897 */ 898 xhci_writel(xhci, temp | PORT_POWER, 899 port_array[wIndex]); 900 901 temp = xhci_readl(xhci, port_array[wIndex]); 902 xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); 903 904 spin_unlock_irqrestore(&xhci->lock, flags); 905 temp = usb_acpi_power_manageable(hcd->self.root_hub, 906 wIndex); 907 if (temp) 908 usb_acpi_set_power_state(hcd->self.root_hub, 909 wIndex, true); 910 spin_lock_irqsave(&xhci->lock, flags); 911 break; 912 case USB_PORT_FEAT_RESET: 913 temp = (temp | PORT_RESET); 914 xhci_writel(xhci, temp, port_array[wIndex]); 915 916 temp = xhci_readl(xhci, port_array[wIndex]); 917 xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); 918 break; 919 case USB_PORT_FEAT_REMOTE_WAKE_MASK: 920 xhci_set_remote_wake_mask(xhci, port_array, 921 wIndex, wake_mask); 922 temp = xhci_readl(xhci, port_array[wIndex]); 923 xhci_dbg(xhci, "set port remote wake mask, " 924 "actual port %d status = 0x%x\n", 925 wIndex, temp); 926 break; 927 case USB_PORT_FEAT_BH_PORT_RESET: 928 temp |= PORT_WR; 929 xhci_writel(xhci, temp, port_array[wIndex]); 930 931 temp = xhci_readl(xhci, port_array[wIndex]); 932 break; 933 case USB_PORT_FEAT_U1_TIMEOUT: 934 if (hcd->speed != HCD_USB3) 935 goto error; 936 temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC); 937 temp &= ~PORT_U1_TIMEOUT_MASK; 938 temp |= PORT_U1_TIMEOUT(timeout); 939 xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC); 940 break; 941 case USB_PORT_FEAT_U2_TIMEOUT: 942 if (hcd->speed != HCD_USB3) 943 goto error; 944 temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC); 945 temp &= ~PORT_U2_TIMEOUT_MASK; 946 temp |= PORT_U2_TIMEOUT(timeout); 947 xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC); 948 break; 949 default: 950 goto error; 951 } 952 /* unblock any posted writes */ 953 temp = xhci_readl(xhci, port_array[wIndex]); 954 break; 955 case ClearPortFeature: 956 if (!wIndex || wIndex > max_ports) 957 goto error; 958 wIndex--; 959 temp = xhci_readl(xhci, port_array[wIndex]); 960 if (temp == 0xffffffff) { 961 retval = -ENODEV; 962 break; 963 } 964 /* FIXME: What new port features do we need to support? */ 965 temp = xhci_port_state_to_neutral(temp); 966 switch (wValue) { 967 case USB_PORT_FEAT_SUSPEND: 968 temp = xhci_readl(xhci, port_array[wIndex]); 969 xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); 970 xhci_dbg(xhci, "PORTSC %04x\n", temp); 971 if (temp & PORT_RESET) 972 goto error; 973 if ((temp & PORT_PLS_MASK) == XDEV_U3) { 974 if ((temp & PORT_PE) == 0) 975 goto error; 976 977 xhci_set_link_state(xhci, port_array, wIndex, 978 XDEV_RESUME); 979 spin_unlock_irqrestore(&xhci->lock, flags); 980 msleep(20); 981 spin_lock_irqsave(&xhci->lock, flags); 982 xhci_set_link_state(xhci, port_array, wIndex, 983 XDEV_U0); 984 } 985 bus_state->port_c_suspend |= 1 << wIndex; 986 987 slot_id = xhci_find_slot_id_by_port(hcd, xhci, 988 wIndex + 1); 989 if (!slot_id) { 990 xhci_dbg(xhci, "slot_id is zero\n"); 991 goto error; 992 } 993 xhci_ring_device(xhci, slot_id); 994 break; 995 case USB_PORT_FEAT_C_SUSPEND: 996 bus_state->port_c_suspend &= ~(1 << wIndex); 997 case USB_PORT_FEAT_C_RESET: 998 case USB_PORT_FEAT_C_BH_PORT_RESET: 999 case USB_PORT_FEAT_C_CONNECTION: 1000 case USB_PORT_FEAT_C_OVER_CURRENT: 1001 case USB_PORT_FEAT_C_ENABLE: 1002 case USB_PORT_FEAT_C_PORT_LINK_STATE: 1003 xhci_clear_port_change_bit(xhci, wValue, wIndex, 1004 port_array[wIndex], temp); 1005 break; 1006 case USB_PORT_FEAT_ENABLE: 1007 xhci_disable_port(hcd, xhci, wIndex, 1008 port_array[wIndex], temp); 1009 break; 1010 case USB_PORT_FEAT_POWER: 1011 xhci_writel(xhci, temp & ~PORT_POWER, 1012 port_array[wIndex]); 1013 1014 spin_unlock_irqrestore(&xhci->lock, flags); 1015 temp = usb_acpi_power_manageable(hcd->self.root_hub, 1016 wIndex); 1017 if (temp) 1018 usb_acpi_set_power_state(hcd->self.root_hub, 1019 wIndex, false); 1020 spin_lock_irqsave(&xhci->lock, flags); 1021 break; 1022 default: 1023 goto error; 1024 } 1025 break; 1026 default: 1027 error: 1028 /* "stall" on error */ 1029 retval = -EPIPE; 1030 } 1031 spin_unlock_irqrestore(&xhci->lock, flags); 1032 return retval; 1033 } 1034 1035 /* 1036 * Returns 0 if the status hasn't changed, or the number of bytes in buf. 1037 * Ports are 0-indexed from the HCD point of view, 1038 * and 1-indexed from the USB core pointer of view. 1039 * 1040 * Note that the status change bits will be cleared as soon as a port status 1041 * change event is generated, so we use the saved status from that event. 1042 */ 1043 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) 1044 { 1045 unsigned long flags; 1046 u32 temp, status; 1047 u32 mask; 1048 int i, retval; 1049 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 1050 int max_ports; 1051 __le32 __iomem **port_array; 1052 struct xhci_bus_state *bus_state; 1053 bool reset_change = false; 1054 1055 max_ports = xhci_get_ports(hcd, &port_array); 1056 bus_state = &xhci->bus_state[hcd_index(hcd)]; 1057 1058 /* Initial status is no changes */ 1059 retval = (max_ports + 8) / 8; 1060 memset(buf, 0, retval); 1061 1062 /* 1063 * Inform the usbcore about resume-in-progress by returning 1064 * a non-zero value even if there are no status changes. 1065 */ 1066 status = bus_state->resuming_ports; 1067 1068 mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; 1069 1070 spin_lock_irqsave(&xhci->lock, flags); 1071 /* For each port, did anything change? If so, set that bit in buf. */ 1072 for (i = 0; i < max_ports; i++) { 1073 temp = xhci_readl(xhci, port_array[i]); 1074 if (temp == 0xffffffff) { 1075 retval = -ENODEV; 1076 break; 1077 } 1078 if ((temp & mask) != 0 || 1079 (bus_state->port_c_suspend & 1 << i) || 1080 (bus_state->resume_done[i] && time_after_eq( 1081 jiffies, bus_state->resume_done[i]))) { 1082 buf[(i + 1) / 8] |= 1 << (i + 1) % 8; 1083 status = 1; 1084 } 1085 if ((temp & PORT_RC)) 1086 reset_change = true; 1087 } 1088 if (!status && !reset_change) { 1089 xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); 1090 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); 1091 } 1092 spin_unlock_irqrestore(&xhci->lock, flags); 1093 return status ? retval : 0; 1094 } 1095 1096 #ifdef CONFIG_PM 1097 1098 int xhci_bus_suspend(struct usb_hcd *hcd) 1099 { 1100 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 1101 int max_ports, port_index; 1102 __le32 __iomem **port_array; 1103 struct xhci_bus_state *bus_state; 1104 unsigned long flags; 1105 1106 max_ports = xhci_get_ports(hcd, &port_array); 1107 bus_state = &xhci->bus_state[hcd_index(hcd)]; 1108 1109 spin_lock_irqsave(&xhci->lock, flags); 1110 1111 if (hcd->self.root_hub->do_remote_wakeup) { 1112 if (bus_state->resuming_ports) { 1113 spin_unlock_irqrestore(&xhci->lock, flags); 1114 xhci_dbg(xhci, "suspend failed because " 1115 "a port is resuming\n"); 1116 return -EBUSY; 1117 } 1118 } 1119 1120 port_index = max_ports; 1121 bus_state->bus_suspended = 0; 1122 while (port_index--) { 1123 /* suspend the port if the port is not suspended */ 1124 u32 t1, t2; 1125 int slot_id; 1126 1127 t1 = xhci_readl(xhci, port_array[port_index]); 1128 t2 = xhci_port_state_to_neutral(t1); 1129 1130 if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { 1131 xhci_dbg(xhci, "port %d not suspended\n", port_index); 1132 slot_id = xhci_find_slot_id_by_port(hcd, xhci, 1133 port_index + 1); 1134 if (slot_id) { 1135 spin_unlock_irqrestore(&xhci->lock, flags); 1136 xhci_stop_device(xhci, slot_id, 1); 1137 spin_lock_irqsave(&xhci->lock, flags); 1138 } 1139 t2 &= ~PORT_PLS_MASK; 1140 t2 |= PORT_LINK_STROBE | XDEV_U3; 1141 set_bit(port_index, &bus_state->bus_suspended); 1142 } 1143 /* USB core sets remote wake mask for USB 3.0 hubs, 1144 * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME 1145 * is enabled, so also enable remote wake here. 1146 */ 1147 if (hcd->self.root_hub->do_remote_wakeup) { 1148 if (t1 & PORT_CONNECT) { 1149 t2 |= PORT_WKOC_E | PORT_WKDISC_E; 1150 t2 &= ~PORT_WKCONN_E; 1151 } else { 1152 t2 |= PORT_WKOC_E | PORT_WKCONN_E; 1153 t2 &= ~PORT_WKDISC_E; 1154 } 1155 } else 1156 t2 &= ~PORT_WAKE_BITS; 1157 1158 t1 = xhci_port_state_to_neutral(t1); 1159 if (t1 != t2) 1160 xhci_writel(xhci, t2, port_array[port_index]); 1161 } 1162 hcd->state = HC_STATE_SUSPENDED; 1163 bus_state->next_statechange = jiffies + msecs_to_jiffies(10); 1164 spin_unlock_irqrestore(&xhci->lock, flags); 1165 return 0; 1166 } 1167 1168 int xhci_bus_resume(struct usb_hcd *hcd) 1169 { 1170 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 1171 int max_ports, port_index; 1172 __le32 __iomem **port_array; 1173 struct xhci_bus_state *bus_state; 1174 u32 temp; 1175 unsigned long flags; 1176 1177 max_ports = xhci_get_ports(hcd, &port_array); 1178 bus_state = &xhci->bus_state[hcd_index(hcd)]; 1179 1180 if (time_before(jiffies, bus_state->next_statechange)) 1181 msleep(5); 1182 1183 spin_lock_irqsave(&xhci->lock, flags); 1184 if (!HCD_HW_ACCESSIBLE(hcd)) { 1185 spin_unlock_irqrestore(&xhci->lock, flags); 1186 return -ESHUTDOWN; 1187 } 1188 1189 /* delay the irqs */ 1190 temp = xhci_readl(xhci, &xhci->op_regs->command); 1191 temp &= ~CMD_EIE; 1192 xhci_writel(xhci, temp, &xhci->op_regs->command); 1193 1194 port_index = max_ports; 1195 while (port_index--) { 1196 /* Check whether need resume ports. If needed 1197 resume port and disable remote wakeup */ 1198 u32 temp; 1199 int slot_id; 1200 1201 temp = xhci_readl(xhci, port_array[port_index]); 1202 if (DEV_SUPERSPEED(temp)) 1203 temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); 1204 else 1205 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); 1206 if (test_bit(port_index, &bus_state->bus_suspended) && 1207 (temp & PORT_PLS_MASK)) { 1208 if (DEV_SUPERSPEED(temp)) { 1209 xhci_set_link_state(xhci, port_array, 1210 port_index, XDEV_U0); 1211 } else { 1212 xhci_set_link_state(xhci, port_array, 1213 port_index, XDEV_RESUME); 1214 1215 spin_unlock_irqrestore(&xhci->lock, flags); 1216 msleep(20); 1217 spin_lock_irqsave(&xhci->lock, flags); 1218 1219 xhci_set_link_state(xhci, port_array, 1220 port_index, XDEV_U0); 1221 } 1222 /* wait for the port to enter U0 and report port link 1223 * state change. 1224 */ 1225 spin_unlock_irqrestore(&xhci->lock, flags); 1226 msleep(20); 1227 spin_lock_irqsave(&xhci->lock, flags); 1228 1229 /* Clear PLC */ 1230 xhci_test_and_clear_bit(xhci, port_array, port_index, 1231 PORT_PLC); 1232 1233 slot_id = xhci_find_slot_id_by_port(hcd, 1234 xhci, port_index + 1); 1235 if (slot_id) 1236 xhci_ring_device(xhci, slot_id); 1237 } else 1238 xhci_writel(xhci, temp, port_array[port_index]); 1239 } 1240 1241 (void) xhci_readl(xhci, &xhci->op_regs->command); 1242 1243 bus_state->next_statechange = jiffies + msecs_to_jiffies(5); 1244 /* re-enable irqs */ 1245 temp = xhci_readl(xhci, &xhci->op_regs->command); 1246 temp |= CMD_EIE; 1247 xhci_writel(xhci, temp, &xhci->op_regs->command); 1248 temp = xhci_readl(xhci, &xhci->op_regs->command); 1249 1250 spin_unlock_irqrestore(&xhci->lock, flags); 1251 return 0; 1252 } 1253 1254 #endif /* CONFIG_PM */ 1255