1 /* 2 * Universal Host Controller Interface driver for USB. 3 * 4 * Maintainer: Alan Stern <stern@rowland.harvard.edu> 5 * 6 * (C) Copyright 1999 Linus Torvalds 7 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com 8 * (C) Copyright 1999 Randy Dunlap 9 * (C) Copyright 1999 Georg Acher, acher@in.tum.de 10 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de 11 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch 12 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at 13 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface 14 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com). 15 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c) 16 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu 17 */ 18 19 20 /* 21 * Technically, updating td->status here is a race, but it's not really a 22 * problem. The worst that can happen is that we set the IOC bit again 23 * generating a spurious interrupt. We could fix this by creating another 24 * QH and leaving the IOC bit always set, but then we would have to play 25 * games with the FSBR code to make sure we get the correct order in all 26 * the cases. I don't think it's worth the effort 27 */ 28 static void uhci_set_next_interrupt(struct uhci_hcd *uhci) 29 { 30 if (uhci->is_stopped) 31 mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies); 32 uhci->term_td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC); 33 } 34 35 static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci) 36 { 37 uhci->term_td->status &= ~cpu_to_hc32(uhci, TD_CTRL_IOC); 38 } 39 40 41 /* 42 * Full-Speed Bandwidth Reclamation (FSBR). 43 * We turn on FSBR whenever a queue that wants it is advancing, 44 * and leave it on for a short time thereafter. 45 */ 46 static void uhci_fsbr_on(struct uhci_hcd *uhci) 47 { 48 struct uhci_qh *lqh; 49 50 /* The terminating skeleton QH always points back to the first 51 * FSBR QH. Make the last async QH point to the terminating 52 * skeleton QH. */ 53 uhci->fsbr_is_on = 1; 54 lqh = list_entry(uhci->skel_async_qh->node.prev, 55 struct uhci_qh, node); 56 lqh->link = LINK_TO_QH(uhci, uhci->skel_term_qh); 57 } 58 59 static void uhci_fsbr_off(struct uhci_hcd *uhci) 60 { 61 struct uhci_qh *lqh; 62 63 /* Remove the link from the last async QH to the terminating 64 * skeleton QH. */ 65 uhci->fsbr_is_on = 0; 66 lqh = list_entry(uhci->skel_async_qh->node.prev, 67 struct uhci_qh, node); 68 lqh->link = UHCI_PTR_TERM(uhci); 69 } 70 71 static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb) 72 { 73 struct urb_priv *urbp = urb->hcpriv; 74 75 if (!(urb->transfer_flags & URB_NO_FSBR)) 76 urbp->fsbr = 1; 77 } 78 79 static void uhci_urbp_wants_fsbr(struct uhci_hcd *uhci, struct urb_priv *urbp) 80 { 81 if (urbp->fsbr) { 82 uhci->fsbr_is_wanted = 1; 83 if (!uhci->fsbr_is_on) 84 uhci_fsbr_on(uhci); 85 else if (uhci->fsbr_expiring) { 86 uhci->fsbr_expiring = 0; 87 del_timer(&uhci->fsbr_timer); 88 } 89 } 90 } 91 92 static void uhci_fsbr_timeout(unsigned long _uhci) 93 { 94 struct uhci_hcd *uhci = (struct uhci_hcd *) _uhci; 95 unsigned long flags; 96 97 spin_lock_irqsave(&uhci->lock, flags); 98 if (uhci->fsbr_expiring) { 99 uhci->fsbr_expiring = 0; 100 uhci_fsbr_off(uhci); 101 } 102 spin_unlock_irqrestore(&uhci->lock, flags); 103 } 104 105 106 static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci) 107 { 108 dma_addr_t dma_handle; 109 struct uhci_td *td; 110 111 td = dma_pool_alloc(uhci->td_pool, GFP_ATOMIC, &dma_handle); 112 if (!td) 113 return NULL; 114 115 td->dma_handle = dma_handle; 116 td->frame = -1; 117 118 INIT_LIST_HEAD(&td->list); 119 INIT_LIST_HEAD(&td->fl_list); 120 121 return td; 122 } 123 124 static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td) 125 { 126 if (!list_empty(&td->list)) 127 dev_WARN(uhci_dev(uhci), "td %p still in list!\n", td); 128 if (!list_empty(&td->fl_list)) 129 dev_WARN(uhci_dev(uhci), "td %p still in fl_list!\n", td); 130 131 dma_pool_free(uhci->td_pool, td, td->dma_handle); 132 } 133 134 static inline void uhci_fill_td(struct uhci_hcd *uhci, struct uhci_td *td, 135 u32 status, u32 token, u32 buffer) 136 { 137 td->status = cpu_to_hc32(uhci, status); 138 td->token = cpu_to_hc32(uhci, token); 139 td->buffer = cpu_to_hc32(uhci, buffer); 140 } 141 142 static void uhci_add_td_to_urbp(struct uhci_td *td, struct urb_priv *urbp) 143 { 144 list_add_tail(&td->list, &urbp->td_list); 145 } 146 147 static void uhci_remove_td_from_urbp(struct uhci_td *td) 148 { 149 list_del_init(&td->list); 150 } 151 152 /* 153 * We insert Isochronous URBs directly into the frame list at the beginning 154 */ 155 static inline void uhci_insert_td_in_frame_list(struct uhci_hcd *uhci, 156 struct uhci_td *td, unsigned framenum) 157 { 158 framenum &= (UHCI_NUMFRAMES - 1); 159 160 td->frame = framenum; 161 162 /* Is there a TD already mapped there? */ 163 if (uhci->frame_cpu[framenum]) { 164 struct uhci_td *ftd, *ltd; 165 166 ftd = uhci->frame_cpu[framenum]; 167 ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); 168 169 list_add_tail(&td->fl_list, &ftd->fl_list); 170 171 td->link = ltd->link; 172 wmb(); 173 ltd->link = LINK_TO_TD(uhci, td); 174 } else { 175 td->link = uhci->frame[framenum]; 176 wmb(); 177 uhci->frame[framenum] = LINK_TO_TD(uhci, td); 178 uhci->frame_cpu[framenum] = td; 179 } 180 } 181 182 static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci, 183 struct uhci_td *td) 184 { 185 /* If it's not inserted, don't remove it */ 186 if (td->frame == -1) { 187 WARN_ON(!list_empty(&td->fl_list)); 188 return; 189 } 190 191 if (uhci->frame_cpu[td->frame] == td) { 192 if (list_empty(&td->fl_list)) { 193 uhci->frame[td->frame] = td->link; 194 uhci->frame_cpu[td->frame] = NULL; 195 } else { 196 struct uhci_td *ntd; 197 198 ntd = list_entry(td->fl_list.next, 199 struct uhci_td, 200 fl_list); 201 uhci->frame[td->frame] = LINK_TO_TD(uhci, ntd); 202 uhci->frame_cpu[td->frame] = ntd; 203 } 204 } else { 205 struct uhci_td *ptd; 206 207 ptd = list_entry(td->fl_list.prev, struct uhci_td, fl_list); 208 ptd->link = td->link; 209 } 210 211 list_del_init(&td->fl_list); 212 td->frame = -1; 213 } 214 215 static inline void uhci_remove_tds_from_frame(struct uhci_hcd *uhci, 216 unsigned int framenum) 217 { 218 struct uhci_td *ftd, *ltd; 219 220 framenum &= (UHCI_NUMFRAMES - 1); 221 222 ftd = uhci->frame_cpu[framenum]; 223 if (ftd) { 224 ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); 225 uhci->frame[framenum] = ltd->link; 226 uhci->frame_cpu[framenum] = NULL; 227 228 while (!list_empty(&ftd->fl_list)) 229 list_del_init(ftd->fl_list.prev); 230 } 231 } 232 233 /* 234 * Remove all the TDs for an Isochronous URB from the frame list 235 */ 236 static void uhci_unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb) 237 { 238 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; 239 struct uhci_td *td; 240 241 list_for_each_entry(td, &urbp->td_list, list) 242 uhci_remove_td_from_frame_list(uhci, td); 243 } 244 245 static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, 246 struct usb_device *udev, struct usb_host_endpoint *hep) 247 { 248 dma_addr_t dma_handle; 249 struct uhci_qh *qh; 250 251 qh = dma_pool_zalloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle); 252 if (!qh) 253 return NULL; 254 255 qh->dma_handle = dma_handle; 256 257 qh->element = UHCI_PTR_TERM(uhci); 258 qh->link = UHCI_PTR_TERM(uhci); 259 260 INIT_LIST_HEAD(&qh->queue); 261 INIT_LIST_HEAD(&qh->node); 262 263 if (udev) { /* Normal QH */ 264 qh->type = usb_endpoint_type(&hep->desc); 265 if (qh->type != USB_ENDPOINT_XFER_ISOC) { 266 qh->dummy_td = uhci_alloc_td(uhci); 267 if (!qh->dummy_td) { 268 dma_pool_free(uhci->qh_pool, qh, dma_handle); 269 return NULL; 270 } 271 } 272 qh->state = QH_STATE_IDLE; 273 qh->hep = hep; 274 qh->udev = udev; 275 hep->hcpriv = qh; 276 277 if (qh->type == USB_ENDPOINT_XFER_INT || 278 qh->type == USB_ENDPOINT_XFER_ISOC) 279 qh->load = usb_calc_bus_time(udev->speed, 280 usb_endpoint_dir_in(&hep->desc), 281 qh->type == USB_ENDPOINT_XFER_ISOC, 282 usb_endpoint_maxp(&hep->desc)) 283 / 1000 + 1; 284 285 } else { /* Skeleton QH */ 286 qh->state = QH_STATE_ACTIVE; 287 qh->type = -1; 288 } 289 return qh; 290 } 291 292 static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) 293 { 294 WARN_ON(qh->state != QH_STATE_IDLE && qh->udev); 295 if (!list_empty(&qh->queue)) 296 dev_WARN(uhci_dev(uhci), "qh %p list not empty!\n", qh); 297 298 list_del(&qh->node); 299 if (qh->udev) { 300 qh->hep->hcpriv = NULL; 301 if (qh->dummy_td) 302 uhci_free_td(uhci, qh->dummy_td); 303 } 304 dma_pool_free(uhci->qh_pool, qh, qh->dma_handle); 305 } 306 307 /* 308 * When a queue is stopped and a dequeued URB is given back, adjust 309 * the previous TD link (if the URB isn't first on the queue) or 310 * save its toggle value (if it is first and is currently executing). 311 * 312 * Returns 0 if the URB should not yet be given back, 1 otherwise. 313 */ 314 static int uhci_cleanup_queue(struct uhci_hcd *uhci, struct uhci_qh *qh, 315 struct urb *urb) 316 { 317 struct urb_priv *urbp = urb->hcpriv; 318 struct uhci_td *td; 319 int ret = 1; 320 321 /* Isochronous pipes don't use toggles and their TD link pointers 322 * get adjusted during uhci_urb_dequeue(). But since their queues 323 * cannot truly be stopped, we have to watch out for dequeues 324 * occurring after the nominal unlink frame. */ 325 if (qh->type == USB_ENDPOINT_XFER_ISOC) { 326 ret = (uhci->frame_number + uhci->is_stopped != 327 qh->unlink_frame); 328 goto done; 329 } 330 331 /* If the URB isn't first on its queue, adjust the link pointer 332 * of the last TD in the previous URB. The toggle doesn't need 333 * to be saved since this URB can't be executing yet. */ 334 if (qh->queue.next != &urbp->node) { 335 struct urb_priv *purbp; 336 struct uhci_td *ptd; 337 338 purbp = list_entry(urbp->node.prev, struct urb_priv, node); 339 WARN_ON(list_empty(&purbp->td_list)); 340 ptd = list_entry(purbp->td_list.prev, struct uhci_td, 341 list); 342 td = list_entry(urbp->td_list.prev, struct uhci_td, 343 list); 344 ptd->link = td->link; 345 goto done; 346 } 347 348 /* If the QH element pointer is UHCI_PTR_TERM then then currently 349 * executing URB has already been unlinked, so this one isn't it. */ 350 if (qh_element(qh) == UHCI_PTR_TERM(uhci)) 351 goto done; 352 qh->element = UHCI_PTR_TERM(uhci); 353 354 /* Control pipes don't have to worry about toggles */ 355 if (qh->type == USB_ENDPOINT_XFER_CONTROL) 356 goto done; 357 358 /* Save the next toggle value */ 359 WARN_ON(list_empty(&urbp->td_list)); 360 td = list_entry(urbp->td_list.next, struct uhci_td, list); 361 qh->needs_fixup = 1; 362 qh->initial_toggle = uhci_toggle(td_token(uhci, td)); 363 364 done: 365 return ret; 366 } 367 368 /* 369 * Fix up the data toggles for URBs in a queue, when one of them 370 * terminates early (short transfer, error, or dequeued). 371 */ 372 static void uhci_fixup_toggles(struct uhci_hcd *uhci, struct uhci_qh *qh, 373 int skip_first) 374 { 375 struct urb_priv *urbp = NULL; 376 struct uhci_td *td; 377 unsigned int toggle = qh->initial_toggle; 378 unsigned int pipe; 379 380 /* Fixups for a short transfer start with the second URB in the 381 * queue (the short URB is the first). */ 382 if (skip_first) 383 urbp = list_entry(qh->queue.next, struct urb_priv, node); 384 385 /* When starting with the first URB, if the QH element pointer is 386 * still valid then we know the URB's toggles are okay. */ 387 else if (qh_element(qh) != UHCI_PTR_TERM(uhci)) 388 toggle = 2; 389 390 /* Fix up the toggle for the URBs in the queue. Normally this 391 * loop won't run more than once: When an error or short transfer 392 * occurs, the queue usually gets emptied. */ 393 urbp = list_prepare_entry(urbp, &qh->queue, node); 394 list_for_each_entry_continue(urbp, &qh->queue, node) { 395 396 /* If the first TD has the right toggle value, we don't 397 * need to change any toggles in this URB */ 398 td = list_entry(urbp->td_list.next, struct uhci_td, list); 399 if (toggle > 1 || uhci_toggle(td_token(uhci, td)) == toggle) { 400 td = list_entry(urbp->td_list.prev, struct uhci_td, 401 list); 402 toggle = uhci_toggle(td_token(uhci, td)) ^ 1; 403 404 /* Otherwise all the toggles in the URB have to be switched */ 405 } else { 406 list_for_each_entry(td, &urbp->td_list, list) { 407 td->token ^= cpu_to_hc32(uhci, 408 TD_TOKEN_TOGGLE); 409 toggle ^= 1; 410 } 411 } 412 } 413 414 wmb(); 415 pipe = list_entry(qh->queue.next, struct urb_priv, node)->urb->pipe; 416 usb_settoggle(qh->udev, usb_pipeendpoint(pipe), 417 usb_pipeout(pipe), toggle); 418 qh->needs_fixup = 0; 419 } 420 421 /* 422 * Link an Isochronous QH into its skeleton's list 423 */ 424 static inline void link_iso(struct uhci_hcd *uhci, struct uhci_qh *qh) 425 { 426 list_add_tail(&qh->node, &uhci->skel_iso_qh->node); 427 428 /* Isochronous QHs aren't linked by the hardware */ 429 } 430 431 /* 432 * Link a high-period interrupt QH into the schedule at the end of its 433 * skeleton's list 434 */ 435 static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) 436 { 437 struct uhci_qh *pqh; 438 439 list_add_tail(&qh->node, &uhci->skelqh[qh->skel]->node); 440 441 pqh = list_entry(qh->node.prev, struct uhci_qh, node); 442 qh->link = pqh->link; 443 wmb(); 444 pqh->link = LINK_TO_QH(uhci, qh); 445 } 446 447 /* 448 * Link a period-1 interrupt or async QH into the schedule at the 449 * correct spot in the async skeleton's list, and update the FSBR link 450 */ 451 static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh) 452 { 453 struct uhci_qh *pqh; 454 __hc32 link_to_new_qh; 455 456 /* Find the predecessor QH for our new one and insert it in the list. 457 * The list of QHs is expected to be short, so linear search won't 458 * take too long. */ 459 list_for_each_entry_reverse(pqh, &uhci->skel_async_qh->node, node) { 460 if (pqh->skel <= qh->skel) 461 break; 462 } 463 list_add(&qh->node, &pqh->node); 464 465 /* Link it into the schedule */ 466 qh->link = pqh->link; 467 wmb(); 468 link_to_new_qh = LINK_TO_QH(uhci, qh); 469 pqh->link = link_to_new_qh; 470 471 /* If this is now the first FSBR QH, link the terminating skeleton 472 * QH to it. */ 473 if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR) 474 uhci->skel_term_qh->link = link_to_new_qh; 475 } 476 477 /* 478 * Put a QH on the schedule in both hardware and software 479 */ 480 static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) 481 { 482 WARN_ON(list_empty(&qh->queue)); 483 484 /* Set the element pointer if it isn't set already. 485 * This isn't needed for Isochronous queues, but it doesn't hurt. */ 486 if (qh_element(qh) == UHCI_PTR_TERM(uhci)) { 487 struct urb_priv *urbp = list_entry(qh->queue.next, 488 struct urb_priv, node); 489 struct uhci_td *td = list_entry(urbp->td_list.next, 490 struct uhci_td, list); 491 492 qh->element = LINK_TO_TD(uhci, td); 493 } 494 495 /* Treat the queue as if it has just advanced */ 496 qh->wait_expired = 0; 497 qh->advance_jiffies = jiffies; 498 499 if (qh->state == QH_STATE_ACTIVE) 500 return; 501 qh->state = QH_STATE_ACTIVE; 502 503 /* Move the QH from its old list to the correct spot in the appropriate 504 * skeleton's list */ 505 if (qh == uhci->next_qh) 506 uhci->next_qh = list_entry(qh->node.next, struct uhci_qh, 507 node); 508 list_del(&qh->node); 509 510 if (qh->skel == SKEL_ISO) 511 link_iso(uhci, qh); 512 else if (qh->skel < SKEL_ASYNC) 513 link_interrupt(uhci, qh); 514 else 515 link_async(uhci, qh); 516 } 517 518 /* 519 * Unlink a high-period interrupt QH from the schedule 520 */ 521 static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh) 522 { 523 struct uhci_qh *pqh; 524 525 pqh = list_entry(qh->node.prev, struct uhci_qh, node); 526 pqh->link = qh->link; 527 mb(); 528 } 529 530 /* 531 * Unlink a period-1 interrupt or async QH from the schedule 532 */ 533 static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh) 534 { 535 struct uhci_qh *pqh; 536 __hc32 link_to_next_qh = qh->link; 537 538 pqh = list_entry(qh->node.prev, struct uhci_qh, node); 539 pqh->link = link_to_next_qh; 540 541 /* If this was the old first FSBR QH, link the terminating skeleton 542 * QH to the next (new first FSBR) QH. */ 543 if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR) 544 uhci->skel_term_qh->link = link_to_next_qh; 545 mb(); 546 } 547 548 /* 549 * Take a QH off the hardware schedule 550 */ 551 static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) 552 { 553 if (qh->state == QH_STATE_UNLINKING) 554 return; 555 WARN_ON(qh->state != QH_STATE_ACTIVE || !qh->udev); 556 qh->state = QH_STATE_UNLINKING; 557 558 /* Unlink the QH from the schedule and record when we did it */ 559 if (qh->skel == SKEL_ISO) 560 ; 561 else if (qh->skel < SKEL_ASYNC) 562 unlink_interrupt(uhci, qh); 563 else 564 unlink_async(uhci, qh); 565 566 uhci_get_current_frame_number(uhci); 567 qh->unlink_frame = uhci->frame_number; 568 569 /* Force an interrupt so we know when the QH is fully unlinked */ 570 if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped) 571 uhci_set_next_interrupt(uhci); 572 573 /* Move the QH from its old list to the end of the unlinking list */ 574 if (qh == uhci->next_qh) 575 uhci->next_qh = list_entry(qh->node.next, struct uhci_qh, 576 node); 577 list_move_tail(&qh->node, &uhci->skel_unlink_qh->node); 578 } 579 580 /* 581 * When we and the controller are through with a QH, it becomes IDLE. 582 * This happens when a QH has been off the schedule (on the unlinking 583 * list) for more than one frame, or when an error occurs while adding 584 * the first URB onto a new QH. 585 */ 586 static void uhci_make_qh_idle(struct uhci_hcd *uhci, struct uhci_qh *qh) 587 { 588 WARN_ON(qh->state == QH_STATE_ACTIVE); 589 590 if (qh == uhci->next_qh) 591 uhci->next_qh = list_entry(qh->node.next, struct uhci_qh, 592 node); 593 list_move(&qh->node, &uhci->idle_qh_list); 594 qh->state = QH_STATE_IDLE; 595 596 /* Now that the QH is idle, its post_td isn't being used */ 597 if (qh->post_td) { 598 uhci_free_td(uhci, qh->post_td); 599 qh->post_td = NULL; 600 } 601 602 /* If anyone is waiting for a QH to become idle, wake them up */ 603 if (uhci->num_waiting) 604 wake_up_all(&uhci->waitqh); 605 } 606 607 /* 608 * Find the highest existing bandwidth load for a given phase and period. 609 */ 610 static int uhci_highest_load(struct uhci_hcd *uhci, int phase, int period) 611 { 612 int highest_load = uhci->load[phase]; 613 614 for (phase += period; phase < MAX_PHASE; phase += period) 615 highest_load = max_t(int, highest_load, uhci->load[phase]); 616 return highest_load; 617 } 618 619 /* 620 * Set qh->phase to the optimal phase for a periodic transfer and 621 * check whether the bandwidth requirement is acceptable. 622 */ 623 static int uhci_check_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh) 624 { 625 int minimax_load; 626 627 /* Find the optimal phase (unless it is already set) and get 628 * its load value. */ 629 if (qh->phase >= 0) 630 minimax_load = uhci_highest_load(uhci, qh->phase, qh->period); 631 else { 632 int phase, load; 633 int max_phase = min_t(int, MAX_PHASE, qh->period); 634 635 qh->phase = 0; 636 minimax_load = uhci_highest_load(uhci, qh->phase, qh->period); 637 for (phase = 1; phase < max_phase; ++phase) { 638 load = uhci_highest_load(uhci, phase, qh->period); 639 if (load < minimax_load) { 640 minimax_load = load; 641 qh->phase = phase; 642 } 643 } 644 } 645 646 /* Maximum allowable periodic bandwidth is 90%, or 900 us per frame */ 647 if (minimax_load + qh->load > 900) { 648 dev_dbg(uhci_dev(uhci), "bandwidth allocation failed: " 649 "period %d, phase %d, %d + %d us\n", 650 qh->period, qh->phase, minimax_load, qh->load); 651 return -ENOSPC; 652 } 653 return 0; 654 } 655 656 /* 657 * Reserve a periodic QH's bandwidth in the schedule 658 */ 659 static void uhci_reserve_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh) 660 { 661 int i; 662 int load = qh->load; 663 char *p = "??"; 664 665 for (i = qh->phase; i < MAX_PHASE; i += qh->period) { 666 uhci->load[i] += load; 667 uhci->total_load += load; 668 } 669 uhci_to_hcd(uhci)->self.bandwidth_allocated = 670 uhci->total_load / MAX_PHASE; 671 switch (qh->type) { 672 case USB_ENDPOINT_XFER_INT: 673 ++uhci_to_hcd(uhci)->self.bandwidth_int_reqs; 674 p = "INT"; 675 break; 676 case USB_ENDPOINT_XFER_ISOC: 677 ++uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs; 678 p = "ISO"; 679 break; 680 } 681 qh->bandwidth_reserved = 1; 682 dev_dbg(uhci_dev(uhci), 683 "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n", 684 "reserve", qh->udev->devnum, 685 qh->hep->desc.bEndpointAddress, p, 686 qh->period, qh->phase, load); 687 } 688 689 /* 690 * Release a periodic QH's bandwidth reservation 691 */ 692 static void uhci_release_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh) 693 { 694 int i; 695 int load = qh->load; 696 char *p = "??"; 697 698 for (i = qh->phase; i < MAX_PHASE; i += qh->period) { 699 uhci->load[i] -= load; 700 uhci->total_load -= load; 701 } 702 uhci_to_hcd(uhci)->self.bandwidth_allocated = 703 uhci->total_load / MAX_PHASE; 704 switch (qh->type) { 705 case USB_ENDPOINT_XFER_INT: 706 --uhci_to_hcd(uhci)->self.bandwidth_int_reqs; 707 p = "INT"; 708 break; 709 case USB_ENDPOINT_XFER_ISOC: 710 --uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs; 711 p = "ISO"; 712 break; 713 } 714 qh->bandwidth_reserved = 0; 715 dev_dbg(uhci_dev(uhci), 716 "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n", 717 "release", qh->udev->devnum, 718 qh->hep->desc.bEndpointAddress, p, 719 qh->period, qh->phase, load); 720 } 721 722 static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, 723 struct urb *urb) 724 { 725 struct urb_priv *urbp; 726 727 urbp = kmem_cache_zalloc(uhci_up_cachep, GFP_ATOMIC); 728 if (!urbp) 729 return NULL; 730 731 urbp->urb = urb; 732 urb->hcpriv = urbp; 733 734 INIT_LIST_HEAD(&urbp->node); 735 INIT_LIST_HEAD(&urbp->td_list); 736 737 return urbp; 738 } 739 740 static void uhci_free_urb_priv(struct uhci_hcd *uhci, 741 struct urb_priv *urbp) 742 { 743 struct uhci_td *td, *tmp; 744 745 if (!list_empty(&urbp->node)) 746 dev_WARN(uhci_dev(uhci), "urb %p still on QH's list!\n", 747 urbp->urb); 748 749 list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { 750 uhci_remove_td_from_urbp(td); 751 uhci_free_td(uhci, td); 752 } 753 754 kmem_cache_free(uhci_up_cachep, urbp); 755 } 756 757 /* 758 * Map status to standard result codes 759 * 760 * <status> is (td_status(uhci, td) & 0xF60000), a.k.a. 761 * uhci_status_bits(td_status(uhci, td)). 762 * Note: <status> does not include the TD_CTRL_NAK bit. 763 * <dir_out> is True for output TDs and False for input TDs. 764 */ 765 static int uhci_map_status(int status, int dir_out) 766 { 767 if (!status) 768 return 0; 769 if (status & TD_CTRL_BITSTUFF) /* Bitstuff error */ 770 return -EPROTO; 771 if (status & TD_CTRL_CRCTIMEO) { /* CRC/Timeout */ 772 if (dir_out) 773 return -EPROTO; 774 else 775 return -EILSEQ; 776 } 777 if (status & TD_CTRL_BABBLE) /* Babble */ 778 return -EOVERFLOW; 779 if (status & TD_CTRL_DBUFERR) /* Buffer error */ 780 return -ENOSR; 781 if (status & TD_CTRL_STALLED) /* Stalled */ 782 return -EPIPE; 783 return 0; 784 } 785 786 /* 787 * Control transfers 788 */ 789 static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, 790 struct uhci_qh *qh) 791 { 792 struct uhci_td *td; 793 unsigned long destination, status; 794 int maxsze = usb_endpoint_maxp(&qh->hep->desc); 795 int len = urb->transfer_buffer_length; 796 dma_addr_t data = urb->transfer_dma; 797 __hc32 *plink; 798 struct urb_priv *urbp = urb->hcpriv; 799 int skel; 800 801 /* The "pipe" thing contains the destination in bits 8--18 */ 802 destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; 803 804 /* 3 errors, dummy TD remains inactive */ 805 status = uhci_maxerr(3); 806 if (urb->dev->speed == USB_SPEED_LOW) 807 status |= TD_CTRL_LS; 808 809 /* 810 * Build the TD for the control request setup packet 811 */ 812 td = qh->dummy_td; 813 uhci_add_td_to_urbp(td, urbp); 814 uhci_fill_td(uhci, td, status, destination | uhci_explen(8), 815 urb->setup_dma); 816 plink = &td->link; 817 status |= TD_CTRL_ACTIVE; 818 819 /* 820 * If direction is "send", change the packet ID from SETUP (0x2D) 821 * to OUT (0xE1). Else change it from SETUP to IN (0x69) and 822 * set Short Packet Detect (SPD) for all data packets. 823 * 824 * 0-length transfers always get treated as "send". 825 */ 826 if (usb_pipeout(urb->pipe) || len == 0) 827 destination ^= (USB_PID_SETUP ^ USB_PID_OUT); 828 else { 829 destination ^= (USB_PID_SETUP ^ USB_PID_IN); 830 status |= TD_CTRL_SPD; 831 } 832 833 /* 834 * Build the DATA TDs 835 */ 836 while (len > 0) { 837 int pktsze = maxsze; 838 839 if (len <= pktsze) { /* The last data packet */ 840 pktsze = len; 841 status &= ~TD_CTRL_SPD; 842 } 843 844 td = uhci_alloc_td(uhci); 845 if (!td) 846 goto nomem; 847 *plink = LINK_TO_TD(uhci, td); 848 849 /* Alternate Data0/1 (start with Data1) */ 850 destination ^= TD_TOKEN_TOGGLE; 851 852 uhci_add_td_to_urbp(td, urbp); 853 uhci_fill_td(uhci, td, status, 854 destination | uhci_explen(pktsze), data); 855 plink = &td->link; 856 857 data += pktsze; 858 len -= pktsze; 859 } 860 861 /* 862 * Build the final TD for control status 863 */ 864 td = uhci_alloc_td(uhci); 865 if (!td) 866 goto nomem; 867 *plink = LINK_TO_TD(uhci, td); 868 869 /* Change direction for the status transaction */ 870 destination ^= (USB_PID_IN ^ USB_PID_OUT); 871 destination |= TD_TOKEN_TOGGLE; /* End in Data1 */ 872 873 uhci_add_td_to_urbp(td, urbp); 874 uhci_fill_td(uhci, td, status | TD_CTRL_IOC, 875 destination | uhci_explen(0), 0); 876 plink = &td->link; 877 878 /* 879 * Build the new dummy TD and activate the old one 880 */ 881 td = uhci_alloc_td(uhci); 882 if (!td) 883 goto nomem; 884 *plink = LINK_TO_TD(uhci, td); 885 886 uhci_fill_td(uhci, td, 0, USB_PID_OUT | uhci_explen(0), 0); 887 wmb(); 888 qh->dummy_td->status |= cpu_to_hc32(uhci, TD_CTRL_ACTIVE); 889 qh->dummy_td = td; 890 891 /* Low-speed transfers get a different queue, and won't hog the bus. 892 * Also, some devices enumerate better without FSBR; the easiest way 893 * to do that is to put URBs on the low-speed queue while the device 894 * isn't in the CONFIGURED state. */ 895 if (urb->dev->speed == USB_SPEED_LOW || 896 urb->dev->state != USB_STATE_CONFIGURED) 897 skel = SKEL_LS_CONTROL; 898 else { 899 skel = SKEL_FS_CONTROL; 900 uhci_add_fsbr(uhci, urb); 901 } 902 if (qh->state != QH_STATE_ACTIVE) 903 qh->skel = skel; 904 return 0; 905 906 nomem: 907 /* Remove the dummy TD from the td_list so it doesn't get freed */ 908 uhci_remove_td_from_urbp(qh->dummy_td); 909 return -ENOMEM; 910 } 911 912 /* 913 * Common submit for bulk and interrupt 914 */ 915 static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, 916 struct uhci_qh *qh) 917 { 918 struct uhci_td *td; 919 unsigned long destination, status; 920 int maxsze = usb_endpoint_maxp(&qh->hep->desc); 921 int len = urb->transfer_buffer_length; 922 int this_sg_len; 923 dma_addr_t data; 924 __hc32 *plink; 925 struct urb_priv *urbp = urb->hcpriv; 926 unsigned int toggle; 927 struct scatterlist *sg; 928 int i; 929 930 if (len < 0) 931 return -EINVAL; 932 933 /* The "pipe" thing contains the destination in bits 8--18 */ 934 destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); 935 toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), 936 usb_pipeout(urb->pipe)); 937 938 /* 3 errors, dummy TD remains inactive */ 939 status = uhci_maxerr(3); 940 if (urb->dev->speed == USB_SPEED_LOW) 941 status |= TD_CTRL_LS; 942 if (usb_pipein(urb->pipe)) 943 status |= TD_CTRL_SPD; 944 945 i = urb->num_mapped_sgs; 946 if (len > 0 && i > 0) { 947 sg = urb->sg; 948 data = sg_dma_address(sg); 949 950 /* urb->transfer_buffer_length may be smaller than the 951 * size of the scatterlist (or vice versa) 952 */ 953 this_sg_len = min_t(int, sg_dma_len(sg), len); 954 } else { 955 sg = NULL; 956 data = urb->transfer_dma; 957 this_sg_len = len; 958 } 959 /* 960 * Build the DATA TDs 961 */ 962 plink = NULL; 963 td = qh->dummy_td; 964 for (;;) { /* Allow zero length packets */ 965 int pktsze = maxsze; 966 967 if (len <= pktsze) { /* The last packet */ 968 pktsze = len; 969 if (!(urb->transfer_flags & URB_SHORT_NOT_OK)) 970 status &= ~TD_CTRL_SPD; 971 } 972 973 if (plink) { 974 td = uhci_alloc_td(uhci); 975 if (!td) 976 goto nomem; 977 *plink = LINK_TO_TD(uhci, td); 978 } 979 uhci_add_td_to_urbp(td, urbp); 980 uhci_fill_td(uhci, td, status, 981 destination | uhci_explen(pktsze) | 982 (toggle << TD_TOKEN_TOGGLE_SHIFT), 983 data); 984 plink = &td->link; 985 status |= TD_CTRL_ACTIVE; 986 987 toggle ^= 1; 988 data += pktsze; 989 this_sg_len -= pktsze; 990 len -= maxsze; 991 if (this_sg_len <= 0) { 992 if (--i <= 0 || len <= 0) 993 break; 994 sg = sg_next(sg); 995 data = sg_dma_address(sg); 996 this_sg_len = min_t(int, sg_dma_len(sg), len); 997 } 998 } 999 1000 /* 1001 * URB_ZERO_PACKET means adding a 0-length packet, if direction 1002 * is OUT and the transfer_length was an exact multiple of maxsze, 1003 * hence (len = transfer_length - N * maxsze) == 0 1004 * however, if transfer_length == 0, the zero packet was already 1005 * prepared above. 1006 */ 1007 if ((urb->transfer_flags & URB_ZERO_PACKET) && 1008 usb_pipeout(urb->pipe) && len == 0 && 1009 urb->transfer_buffer_length > 0) { 1010 td = uhci_alloc_td(uhci); 1011 if (!td) 1012 goto nomem; 1013 *plink = LINK_TO_TD(uhci, td); 1014 1015 uhci_add_td_to_urbp(td, urbp); 1016 uhci_fill_td(uhci, td, status, 1017 destination | uhci_explen(0) | 1018 (toggle << TD_TOKEN_TOGGLE_SHIFT), 1019 data); 1020 plink = &td->link; 1021 1022 toggle ^= 1; 1023 } 1024 1025 /* Set the interrupt-on-completion flag on the last packet. 1026 * A more-or-less typical 4 KB URB (= size of one memory page) 1027 * will require about 3 ms to transfer; that's a little on the 1028 * fast side but not enough to justify delaying an interrupt 1029 * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT 1030 * flag setting. */ 1031 td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC); 1032 1033 /* 1034 * Build the new dummy TD and activate the old one 1035 */ 1036 td = uhci_alloc_td(uhci); 1037 if (!td) 1038 goto nomem; 1039 *plink = LINK_TO_TD(uhci, td); 1040 1041 uhci_fill_td(uhci, td, 0, USB_PID_OUT | uhci_explen(0), 0); 1042 wmb(); 1043 qh->dummy_td->status |= cpu_to_hc32(uhci, TD_CTRL_ACTIVE); 1044 qh->dummy_td = td; 1045 1046 usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), 1047 usb_pipeout(urb->pipe), toggle); 1048 return 0; 1049 1050 nomem: 1051 /* Remove the dummy TD from the td_list so it doesn't get freed */ 1052 uhci_remove_td_from_urbp(qh->dummy_td); 1053 return -ENOMEM; 1054 } 1055 1056 static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, 1057 struct uhci_qh *qh) 1058 { 1059 int ret; 1060 1061 /* Can't have low-speed bulk transfers */ 1062 if (urb->dev->speed == USB_SPEED_LOW) 1063 return -EINVAL; 1064 1065 if (qh->state != QH_STATE_ACTIVE) 1066 qh->skel = SKEL_BULK; 1067 ret = uhci_submit_common(uhci, urb, qh); 1068 if (ret == 0) 1069 uhci_add_fsbr(uhci, urb); 1070 return ret; 1071 } 1072 1073 static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, 1074 struct uhci_qh *qh) 1075 { 1076 int ret; 1077 1078 /* USB 1.1 interrupt transfers only involve one packet per interval. 1079 * Drivers can submit URBs of any length, but longer ones will need 1080 * multiple intervals to complete. 1081 */ 1082 1083 if (!qh->bandwidth_reserved) { 1084 int exponent; 1085 1086 /* Figure out which power-of-two queue to use */ 1087 for (exponent = 7; exponent >= 0; --exponent) { 1088 if ((1 << exponent) <= urb->interval) 1089 break; 1090 } 1091 if (exponent < 0) 1092 return -EINVAL; 1093 1094 /* If the slot is full, try a lower period */ 1095 do { 1096 qh->period = 1 << exponent; 1097 qh->skel = SKEL_INDEX(exponent); 1098 1099 /* For now, interrupt phase is fixed by the layout 1100 * of the QH lists. 1101 */ 1102 qh->phase = (qh->period / 2) & (MAX_PHASE - 1); 1103 ret = uhci_check_bandwidth(uhci, qh); 1104 } while (ret != 0 && --exponent >= 0); 1105 if (ret) 1106 return ret; 1107 } else if (qh->period > urb->interval) 1108 return -EINVAL; /* Can't decrease the period */ 1109 1110 ret = uhci_submit_common(uhci, urb, qh); 1111 if (ret == 0) { 1112 urb->interval = qh->period; 1113 if (!qh->bandwidth_reserved) 1114 uhci_reserve_bandwidth(uhci, qh); 1115 } 1116 return ret; 1117 } 1118 1119 /* 1120 * Fix up the data structures following a short transfer 1121 */ 1122 static int uhci_fixup_short_transfer(struct uhci_hcd *uhci, 1123 struct uhci_qh *qh, struct urb_priv *urbp) 1124 { 1125 struct uhci_td *td; 1126 struct list_head *tmp; 1127 int ret; 1128 1129 td = list_entry(urbp->td_list.prev, struct uhci_td, list); 1130 if (qh->type == USB_ENDPOINT_XFER_CONTROL) { 1131 1132 /* When a control transfer is short, we have to restart 1133 * the queue at the status stage transaction, which is 1134 * the last TD. */ 1135 WARN_ON(list_empty(&urbp->td_list)); 1136 qh->element = LINK_TO_TD(uhci, td); 1137 tmp = td->list.prev; 1138 ret = -EINPROGRESS; 1139 1140 } else { 1141 1142 /* When a bulk/interrupt transfer is short, we have to 1143 * fix up the toggles of the following URBs on the queue 1144 * before restarting the queue at the next URB. */ 1145 qh->initial_toggle = 1146 uhci_toggle(td_token(uhci, qh->post_td)) ^ 1; 1147 uhci_fixup_toggles(uhci, qh, 1); 1148 1149 if (list_empty(&urbp->td_list)) 1150 td = qh->post_td; 1151 qh->element = td->link; 1152 tmp = urbp->td_list.prev; 1153 ret = 0; 1154 } 1155 1156 /* Remove all the TDs we skipped over, from tmp back to the start */ 1157 while (tmp != &urbp->td_list) { 1158 td = list_entry(tmp, struct uhci_td, list); 1159 tmp = tmp->prev; 1160 1161 uhci_remove_td_from_urbp(td); 1162 uhci_free_td(uhci, td); 1163 } 1164 return ret; 1165 } 1166 1167 /* 1168 * Common result for control, bulk, and interrupt 1169 */ 1170 static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) 1171 { 1172 struct urb_priv *urbp = urb->hcpriv; 1173 struct uhci_qh *qh = urbp->qh; 1174 struct uhci_td *td, *tmp; 1175 unsigned status; 1176 int ret = 0; 1177 1178 list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { 1179 unsigned int ctrlstat; 1180 int len; 1181 1182 ctrlstat = td_status(uhci, td); 1183 status = uhci_status_bits(ctrlstat); 1184 if (status & TD_CTRL_ACTIVE) 1185 return -EINPROGRESS; 1186 1187 len = uhci_actual_length(ctrlstat); 1188 urb->actual_length += len; 1189 1190 if (status) { 1191 ret = uhci_map_status(status, 1192 uhci_packetout(td_token(uhci, td))); 1193 if ((debug == 1 && ret != -EPIPE) || debug > 1) { 1194 /* Some debugging code */ 1195 dev_dbg(&urb->dev->dev, 1196 "%s: failed with status %x\n", 1197 __func__, status); 1198 1199 if (debug > 1 && errbuf) { 1200 /* Print the chain for debugging */ 1201 uhci_show_qh(uhci, urbp->qh, errbuf, 1202 ERRBUF_LEN - EXTRA_SPACE, 0); 1203 lprintk(errbuf); 1204 } 1205 } 1206 1207 /* Did we receive a short packet? */ 1208 } else if (len < uhci_expected_length(td_token(uhci, td))) { 1209 1210 /* For control transfers, go to the status TD if 1211 * this isn't already the last data TD */ 1212 if (qh->type == USB_ENDPOINT_XFER_CONTROL) { 1213 if (td->list.next != urbp->td_list.prev) 1214 ret = 1; 1215 } 1216 1217 /* For bulk and interrupt, this may be an error */ 1218 else if (urb->transfer_flags & URB_SHORT_NOT_OK) 1219 ret = -EREMOTEIO; 1220 1221 /* Fixup needed only if this isn't the URB's last TD */ 1222 else if (&td->list != urbp->td_list.prev) 1223 ret = 1; 1224 } 1225 1226 uhci_remove_td_from_urbp(td); 1227 if (qh->post_td) 1228 uhci_free_td(uhci, qh->post_td); 1229 qh->post_td = td; 1230 1231 if (ret != 0) 1232 goto err; 1233 } 1234 return ret; 1235 1236 err: 1237 if (ret < 0) { 1238 /* Note that the queue has stopped and save 1239 * the next toggle value */ 1240 qh->element = UHCI_PTR_TERM(uhci); 1241 qh->is_stopped = 1; 1242 qh->needs_fixup = (qh->type != USB_ENDPOINT_XFER_CONTROL); 1243 qh->initial_toggle = uhci_toggle(td_token(uhci, td)) ^ 1244 (ret == -EREMOTEIO); 1245 1246 } else /* Short packet received */ 1247 ret = uhci_fixup_short_transfer(uhci, qh, urbp); 1248 return ret; 1249 } 1250 1251 /* 1252 * Isochronous transfers 1253 */ 1254 static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, 1255 struct uhci_qh *qh) 1256 { 1257 struct uhci_td *td = NULL; /* Since urb->number_of_packets > 0 */ 1258 int i; 1259 unsigned frame, next; 1260 unsigned long destination, status; 1261 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; 1262 1263 /* Values must not be too big (could overflow below) */ 1264 if (urb->interval >= UHCI_NUMFRAMES || 1265 urb->number_of_packets >= UHCI_NUMFRAMES) 1266 return -EFBIG; 1267 1268 uhci_get_current_frame_number(uhci); 1269 1270 /* Check the period and figure out the starting frame number */ 1271 if (!qh->bandwidth_reserved) { 1272 qh->period = urb->interval; 1273 qh->phase = -1; /* Find the best phase */ 1274 i = uhci_check_bandwidth(uhci, qh); 1275 if (i) 1276 return i; 1277 1278 /* Allow a little time to allocate the TDs */ 1279 next = uhci->frame_number + 10; 1280 frame = qh->phase; 1281 1282 /* Round up to the first available slot */ 1283 frame += (next - frame + qh->period - 1) & -qh->period; 1284 1285 } else if (qh->period != urb->interval) { 1286 return -EINVAL; /* Can't change the period */ 1287 1288 } else { 1289 next = uhci->frame_number + 1; 1290 1291 /* Find the next unused frame */ 1292 if (list_empty(&qh->queue)) { 1293 frame = qh->iso_frame; 1294 } else { 1295 struct urb *lurb; 1296 1297 lurb = list_entry(qh->queue.prev, 1298 struct urb_priv, node)->urb; 1299 frame = lurb->start_frame + 1300 lurb->number_of_packets * 1301 lurb->interval; 1302 } 1303 1304 /* Fell behind? */ 1305 if (!uhci_frame_before_eq(next, frame)) { 1306 1307 /* USB_ISO_ASAP: Round up to the first available slot */ 1308 if (urb->transfer_flags & URB_ISO_ASAP) 1309 frame += (next - frame + qh->period - 1) & 1310 -qh->period; 1311 1312 /* 1313 * Not ASAP: Use the next slot in the stream, 1314 * no matter what. 1315 */ 1316 else if (!uhci_frame_before_eq(next, 1317 frame + (urb->number_of_packets - 1) * 1318 qh->period)) 1319 dev_dbg(uhci_dev(uhci), "iso underrun %p (%u+%u < %u)\n", 1320 urb, frame, 1321 (urb->number_of_packets - 1) * 1322 qh->period, 1323 next); 1324 } 1325 } 1326 1327 /* Make sure we won't have to go too far into the future */ 1328 if (uhci_frame_before_eq(uhci->last_iso_frame + UHCI_NUMFRAMES, 1329 frame + urb->number_of_packets * urb->interval)) 1330 return -EFBIG; 1331 urb->start_frame = frame; 1332 1333 status = TD_CTRL_ACTIVE | TD_CTRL_IOS; 1334 destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); 1335 1336 for (i = 0; i < urb->number_of_packets; i++) { 1337 td = uhci_alloc_td(uhci); 1338 if (!td) 1339 return -ENOMEM; 1340 1341 uhci_add_td_to_urbp(td, urbp); 1342 uhci_fill_td(uhci, td, status, destination | 1343 uhci_explen(urb->iso_frame_desc[i].length), 1344 urb->transfer_dma + 1345 urb->iso_frame_desc[i].offset); 1346 } 1347 1348 /* Set the interrupt-on-completion flag on the last packet. */ 1349 td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC); 1350 1351 /* Add the TDs to the frame list */ 1352 frame = urb->start_frame; 1353 list_for_each_entry(td, &urbp->td_list, list) { 1354 uhci_insert_td_in_frame_list(uhci, td, frame); 1355 frame += qh->period; 1356 } 1357 1358 if (list_empty(&qh->queue)) { 1359 qh->iso_packet_desc = &urb->iso_frame_desc[0]; 1360 qh->iso_frame = urb->start_frame; 1361 } 1362 1363 qh->skel = SKEL_ISO; 1364 if (!qh->bandwidth_reserved) 1365 uhci_reserve_bandwidth(uhci, qh); 1366 return 0; 1367 } 1368 1369 static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb) 1370 { 1371 struct uhci_td *td, *tmp; 1372 struct urb_priv *urbp = urb->hcpriv; 1373 struct uhci_qh *qh = urbp->qh; 1374 1375 list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { 1376 unsigned int ctrlstat; 1377 int status; 1378 int actlength; 1379 1380 if (uhci_frame_before_eq(uhci->cur_iso_frame, qh->iso_frame)) 1381 return -EINPROGRESS; 1382 1383 uhci_remove_tds_from_frame(uhci, qh->iso_frame); 1384 1385 ctrlstat = td_status(uhci, td); 1386 if (ctrlstat & TD_CTRL_ACTIVE) { 1387 status = -EXDEV; /* TD was added too late? */ 1388 } else { 1389 status = uhci_map_status(uhci_status_bits(ctrlstat), 1390 usb_pipeout(urb->pipe)); 1391 actlength = uhci_actual_length(ctrlstat); 1392 1393 urb->actual_length += actlength; 1394 qh->iso_packet_desc->actual_length = actlength; 1395 qh->iso_packet_desc->status = status; 1396 } 1397 if (status) 1398 urb->error_count++; 1399 1400 uhci_remove_td_from_urbp(td); 1401 uhci_free_td(uhci, td); 1402 qh->iso_frame += qh->period; 1403 ++qh->iso_packet_desc; 1404 } 1405 return 0; 1406 } 1407 1408 static int uhci_urb_enqueue(struct usb_hcd *hcd, 1409 struct urb *urb, gfp_t mem_flags) 1410 { 1411 int ret; 1412 struct uhci_hcd *uhci = hcd_to_uhci(hcd); 1413 unsigned long flags; 1414 struct urb_priv *urbp; 1415 struct uhci_qh *qh; 1416 1417 spin_lock_irqsave(&uhci->lock, flags); 1418 1419 ret = usb_hcd_link_urb_to_ep(hcd, urb); 1420 if (ret) 1421 goto done_not_linked; 1422 1423 ret = -ENOMEM; 1424 urbp = uhci_alloc_urb_priv(uhci, urb); 1425 if (!urbp) 1426 goto done; 1427 1428 if (urb->ep->hcpriv) 1429 qh = urb->ep->hcpriv; 1430 else { 1431 qh = uhci_alloc_qh(uhci, urb->dev, urb->ep); 1432 if (!qh) 1433 goto err_no_qh; 1434 } 1435 urbp->qh = qh; 1436 1437 switch (qh->type) { 1438 case USB_ENDPOINT_XFER_CONTROL: 1439 ret = uhci_submit_control(uhci, urb, qh); 1440 break; 1441 case USB_ENDPOINT_XFER_BULK: 1442 ret = uhci_submit_bulk(uhci, urb, qh); 1443 break; 1444 case USB_ENDPOINT_XFER_INT: 1445 ret = uhci_submit_interrupt(uhci, urb, qh); 1446 break; 1447 case USB_ENDPOINT_XFER_ISOC: 1448 urb->error_count = 0; 1449 ret = uhci_submit_isochronous(uhci, urb, qh); 1450 break; 1451 } 1452 if (ret != 0) 1453 goto err_submit_failed; 1454 1455 /* Add this URB to the QH */ 1456 list_add_tail(&urbp->node, &qh->queue); 1457 1458 /* If the new URB is the first and only one on this QH then either 1459 * the QH is new and idle or else it's unlinked and waiting to 1460 * become idle, so we can activate it right away. But only if the 1461 * queue isn't stopped. */ 1462 if (qh->queue.next == &urbp->node && !qh->is_stopped) { 1463 uhci_activate_qh(uhci, qh); 1464 uhci_urbp_wants_fsbr(uhci, urbp); 1465 } 1466 goto done; 1467 1468 err_submit_failed: 1469 if (qh->state == QH_STATE_IDLE) 1470 uhci_make_qh_idle(uhci, qh); /* Reclaim unused QH */ 1471 err_no_qh: 1472 uhci_free_urb_priv(uhci, urbp); 1473 done: 1474 if (ret) 1475 usb_hcd_unlink_urb_from_ep(hcd, urb); 1476 done_not_linked: 1477 spin_unlock_irqrestore(&uhci->lock, flags); 1478 return ret; 1479 } 1480 1481 static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) 1482 { 1483 struct uhci_hcd *uhci = hcd_to_uhci(hcd); 1484 unsigned long flags; 1485 struct uhci_qh *qh; 1486 int rc; 1487 1488 spin_lock_irqsave(&uhci->lock, flags); 1489 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 1490 if (rc) 1491 goto done; 1492 1493 qh = ((struct urb_priv *) urb->hcpriv)->qh; 1494 1495 /* Remove Isochronous TDs from the frame list ASAP */ 1496 if (qh->type == USB_ENDPOINT_XFER_ISOC) { 1497 uhci_unlink_isochronous_tds(uhci, urb); 1498 mb(); 1499 1500 /* If the URB has already started, update the QH unlink time */ 1501 uhci_get_current_frame_number(uhci); 1502 if (uhci_frame_before_eq(urb->start_frame, uhci->frame_number)) 1503 qh->unlink_frame = uhci->frame_number; 1504 } 1505 1506 uhci_unlink_qh(uhci, qh); 1507 1508 done: 1509 spin_unlock_irqrestore(&uhci->lock, flags); 1510 return rc; 1511 } 1512 1513 /* 1514 * Finish unlinking an URB and give it back 1515 */ 1516 static void uhci_giveback_urb(struct uhci_hcd *uhci, struct uhci_qh *qh, 1517 struct urb *urb, int status) 1518 __releases(uhci->lock) 1519 __acquires(uhci->lock) 1520 { 1521 struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; 1522 1523 if (qh->type == USB_ENDPOINT_XFER_CONTROL) { 1524 1525 /* Subtract off the length of the SETUP packet from 1526 * urb->actual_length. 1527 */ 1528 urb->actual_length -= min_t(u32, 8, urb->actual_length); 1529 } 1530 1531 /* When giving back the first URB in an Isochronous queue, 1532 * reinitialize the QH's iso-related members for the next URB. */ 1533 else if (qh->type == USB_ENDPOINT_XFER_ISOC && 1534 urbp->node.prev == &qh->queue && 1535 urbp->node.next != &qh->queue) { 1536 struct urb *nurb = list_entry(urbp->node.next, 1537 struct urb_priv, node)->urb; 1538 1539 qh->iso_packet_desc = &nurb->iso_frame_desc[0]; 1540 qh->iso_frame = nurb->start_frame; 1541 } 1542 1543 /* Take the URB off the QH's queue. If the queue is now empty, 1544 * this is a perfect time for a toggle fixup. */ 1545 list_del_init(&urbp->node); 1546 if (list_empty(&qh->queue) && qh->needs_fixup) { 1547 usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), 1548 usb_pipeout(urb->pipe), qh->initial_toggle); 1549 qh->needs_fixup = 0; 1550 } 1551 1552 uhci_free_urb_priv(uhci, urbp); 1553 usb_hcd_unlink_urb_from_ep(uhci_to_hcd(uhci), urb); 1554 1555 spin_unlock(&uhci->lock); 1556 usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb, status); 1557 spin_lock(&uhci->lock); 1558 1559 /* If the queue is now empty, we can unlink the QH and give up its 1560 * reserved bandwidth. */ 1561 if (list_empty(&qh->queue)) { 1562 uhci_unlink_qh(uhci, qh); 1563 if (qh->bandwidth_reserved) 1564 uhci_release_bandwidth(uhci, qh); 1565 } 1566 } 1567 1568 /* 1569 * Scan the URBs in a QH's queue 1570 */ 1571 #define QH_FINISHED_UNLINKING(qh) \ 1572 (qh->state == QH_STATE_UNLINKING && \ 1573 uhci->frame_number + uhci->is_stopped != qh->unlink_frame) 1574 1575 static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) 1576 { 1577 struct urb_priv *urbp; 1578 struct urb *urb; 1579 int status; 1580 1581 while (!list_empty(&qh->queue)) { 1582 urbp = list_entry(qh->queue.next, struct urb_priv, node); 1583 urb = urbp->urb; 1584 1585 if (qh->type == USB_ENDPOINT_XFER_ISOC) 1586 status = uhci_result_isochronous(uhci, urb); 1587 else 1588 status = uhci_result_common(uhci, urb); 1589 if (status == -EINPROGRESS) 1590 break; 1591 1592 /* Dequeued but completed URBs can't be given back unless 1593 * the QH is stopped or has finished unlinking. */ 1594 if (urb->unlinked) { 1595 if (QH_FINISHED_UNLINKING(qh)) 1596 qh->is_stopped = 1; 1597 else if (!qh->is_stopped) 1598 return; 1599 } 1600 1601 uhci_giveback_urb(uhci, qh, urb, status); 1602 if (status < 0) 1603 break; 1604 } 1605 1606 /* If the QH is neither stopped nor finished unlinking (normal case), 1607 * our work here is done. */ 1608 if (QH_FINISHED_UNLINKING(qh)) 1609 qh->is_stopped = 1; 1610 else if (!qh->is_stopped) 1611 return; 1612 1613 /* Otherwise give back each of the dequeued URBs */ 1614 restart: 1615 list_for_each_entry(urbp, &qh->queue, node) { 1616 urb = urbp->urb; 1617 if (urb->unlinked) { 1618 1619 /* Fix up the TD links and save the toggles for 1620 * non-Isochronous queues. For Isochronous queues, 1621 * test for too-recent dequeues. */ 1622 if (!uhci_cleanup_queue(uhci, qh, urb)) { 1623 qh->is_stopped = 0; 1624 return; 1625 } 1626 uhci_giveback_urb(uhci, qh, urb, 0); 1627 goto restart; 1628 } 1629 } 1630 qh->is_stopped = 0; 1631 1632 /* There are no more dequeued URBs. If there are still URBs on the 1633 * queue, the QH can now be re-activated. */ 1634 if (!list_empty(&qh->queue)) { 1635 if (qh->needs_fixup) 1636 uhci_fixup_toggles(uhci, qh, 0); 1637 1638 /* If the first URB on the queue wants FSBR but its time 1639 * limit has expired, set the next TD to interrupt on 1640 * completion before reactivating the QH. */ 1641 urbp = list_entry(qh->queue.next, struct urb_priv, node); 1642 if (urbp->fsbr && qh->wait_expired) { 1643 struct uhci_td *td = list_entry(urbp->td_list.next, 1644 struct uhci_td, list); 1645 1646 td->status |= cpu_to_hc32(uhci, TD_CTRL_IOC); 1647 } 1648 1649 uhci_activate_qh(uhci, qh); 1650 } 1651 1652 /* The queue is empty. The QH can become idle if it is fully 1653 * unlinked. */ 1654 else if (QH_FINISHED_UNLINKING(qh)) 1655 uhci_make_qh_idle(uhci, qh); 1656 } 1657 1658 /* 1659 * Check for queues that have made some forward progress. 1660 * Returns 0 if the queue is not Isochronous, is ACTIVE, and 1661 * has not advanced since last examined; 1 otherwise. 1662 * 1663 * Early Intel controllers have a bug which causes qh->element sometimes 1664 * not to advance when a TD completes successfully. The queue remains 1665 * stuck on the inactive completed TD. We detect such cases and advance 1666 * the element pointer by hand. 1667 */ 1668 static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh) 1669 { 1670 struct urb_priv *urbp = NULL; 1671 struct uhci_td *td; 1672 int ret = 1; 1673 unsigned status; 1674 1675 if (qh->type == USB_ENDPOINT_XFER_ISOC) 1676 goto done; 1677 1678 /* Treat an UNLINKING queue as though it hasn't advanced. 1679 * This is okay because reactivation will treat it as though 1680 * it has advanced, and if it is going to become IDLE then 1681 * this doesn't matter anyway. Furthermore it's possible 1682 * for an UNLINKING queue not to have any URBs at all, or 1683 * for its first URB not to have any TDs (if it was dequeued 1684 * just as it completed). So it's not easy in any case to 1685 * test whether such queues have advanced. */ 1686 if (qh->state != QH_STATE_ACTIVE) { 1687 urbp = NULL; 1688 status = 0; 1689 1690 } else { 1691 urbp = list_entry(qh->queue.next, struct urb_priv, node); 1692 td = list_entry(urbp->td_list.next, struct uhci_td, list); 1693 status = td_status(uhci, td); 1694 if (!(status & TD_CTRL_ACTIVE)) { 1695 1696 /* We're okay, the queue has advanced */ 1697 qh->wait_expired = 0; 1698 qh->advance_jiffies = jiffies; 1699 goto done; 1700 } 1701 ret = uhci->is_stopped; 1702 } 1703 1704 /* The queue hasn't advanced; check for timeout */ 1705 if (qh->wait_expired) 1706 goto done; 1707 1708 if (time_after(jiffies, qh->advance_jiffies + QH_WAIT_TIMEOUT)) { 1709 1710 /* Detect the Intel bug and work around it */ 1711 if (qh->post_td && qh_element(qh) == 1712 LINK_TO_TD(uhci, qh->post_td)) { 1713 qh->element = qh->post_td->link; 1714 qh->advance_jiffies = jiffies; 1715 ret = 1; 1716 goto done; 1717 } 1718 1719 qh->wait_expired = 1; 1720 1721 /* If the current URB wants FSBR, unlink it temporarily 1722 * so that we can safely set the next TD to interrupt on 1723 * completion. That way we'll know as soon as the queue 1724 * starts moving again. */ 1725 if (urbp && urbp->fsbr && !(status & TD_CTRL_IOC)) 1726 uhci_unlink_qh(uhci, qh); 1727 1728 } else { 1729 /* Unmoving but not-yet-expired queues keep FSBR alive */ 1730 if (urbp) 1731 uhci_urbp_wants_fsbr(uhci, urbp); 1732 } 1733 1734 done: 1735 return ret; 1736 } 1737 1738 /* 1739 * Process events in the schedule, but only in one thread at a time 1740 */ 1741 static void uhci_scan_schedule(struct uhci_hcd *uhci) 1742 { 1743 int i; 1744 struct uhci_qh *qh; 1745 1746 /* Don't allow re-entrant calls */ 1747 if (uhci->scan_in_progress) { 1748 uhci->need_rescan = 1; 1749 return; 1750 } 1751 uhci->scan_in_progress = 1; 1752 rescan: 1753 uhci->need_rescan = 0; 1754 uhci->fsbr_is_wanted = 0; 1755 1756 uhci_clear_next_interrupt(uhci); 1757 uhci_get_current_frame_number(uhci); 1758 uhci->cur_iso_frame = uhci->frame_number; 1759 1760 /* Go through all the QH queues and process the URBs in each one */ 1761 for (i = 0; i < UHCI_NUM_SKELQH - 1; ++i) { 1762 uhci->next_qh = list_entry(uhci->skelqh[i]->node.next, 1763 struct uhci_qh, node); 1764 while ((qh = uhci->next_qh) != uhci->skelqh[i]) { 1765 uhci->next_qh = list_entry(qh->node.next, 1766 struct uhci_qh, node); 1767 1768 if (uhci_advance_check(uhci, qh)) { 1769 uhci_scan_qh(uhci, qh); 1770 if (qh->state == QH_STATE_ACTIVE) { 1771 uhci_urbp_wants_fsbr(uhci, 1772 list_entry(qh->queue.next, struct urb_priv, node)); 1773 } 1774 } 1775 } 1776 } 1777 1778 uhci->last_iso_frame = uhci->cur_iso_frame; 1779 if (uhci->need_rescan) 1780 goto rescan; 1781 uhci->scan_in_progress = 0; 1782 1783 if (uhci->fsbr_is_on && !uhci->fsbr_is_wanted && 1784 !uhci->fsbr_expiring) { 1785 uhci->fsbr_expiring = 1; 1786 mod_timer(&uhci->fsbr_timer, jiffies + FSBR_OFF_DELAY); 1787 } 1788 1789 if (list_empty(&uhci->skel_unlink_qh->node)) 1790 uhci_clear_next_interrupt(uhci); 1791 else 1792 uhci_set_next_interrupt(uhci); 1793 } 1794