1 /* 2 * R8A66597 HCD (Host Controller Driver) 3 * 4 * Copyright (C) 2006-2007 Renesas Solutions Corp. 5 * Portions Copyright (C) 2004 Psion Teklogix (for NetBook PRO) 6 * Portions Copyright (C) 2004-2005 David Brownell 7 * Portions Copyright (C) 1999 Roman Weissgaerber 8 * 9 * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; version 2 of the License. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 23 * 24 */ 25 26 #ifndef __R8A66597_H__ 27 #define __R8A66597_H__ 28 29 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) 30 #include <linux/clk.h> 31 #endif 32 33 #include <linux/usb/r8a66597.h> 34 35 #define SYSCFG0 0x00 36 #define SYSCFG1 0x02 37 #define SYSSTS0 0x04 38 #define SYSSTS1 0x06 39 #define DVSTCTR0 0x08 40 #define DVSTCTR1 0x0A 41 #define TESTMODE 0x0C 42 #define PINCFG 0x0E 43 #define DMA0CFG 0x10 44 #define DMA1CFG 0x12 45 #define CFIFO 0x14 46 #define D0FIFO 0x18 47 #define D1FIFO 0x1C 48 #define CFIFOSEL 0x20 49 #define CFIFOCTR 0x22 50 #define CFIFOSIE 0x24 51 #define D0FIFOSEL 0x28 52 #define D0FIFOCTR 0x2A 53 #define D1FIFOSEL 0x2C 54 #define D1FIFOCTR 0x2E 55 #define INTENB0 0x30 56 #define INTENB1 0x32 57 #define INTENB2 0x34 58 #define BRDYENB 0x36 59 #define NRDYENB 0x38 60 #define BEMPENB 0x3A 61 #define SOFCFG 0x3C 62 #define INTSTS0 0x40 63 #define INTSTS1 0x42 64 #define INTSTS2 0x44 65 #define BRDYSTS 0x46 66 #define NRDYSTS 0x48 67 #define BEMPSTS 0x4A 68 #define FRMNUM 0x4C 69 #define UFRMNUM 0x4E 70 #define USBADDR 0x50 71 #define USBREQ 0x54 72 #define USBVAL 0x56 73 #define USBINDX 0x58 74 #define USBLENG 0x5A 75 #define DCPCFG 0x5C 76 #define DCPMAXP 0x5E 77 #define DCPCTR 0x60 78 #define PIPESEL 0x64 79 #define PIPECFG 0x68 80 #define PIPEBUF 0x6A 81 #define PIPEMAXP 0x6C 82 #define PIPEPERI 0x6E 83 #define PIPE1CTR 0x70 84 #define PIPE2CTR 0x72 85 #define PIPE3CTR 0x74 86 #define PIPE4CTR 0x76 87 #define PIPE5CTR 0x78 88 #define PIPE6CTR 0x7A 89 #define PIPE7CTR 0x7C 90 #define PIPE8CTR 0x7E 91 #define PIPE9CTR 0x80 92 #define PIPE1TRE 0x90 93 #define PIPE1TRN 0x92 94 #define PIPE2TRE 0x94 95 #define PIPE2TRN 0x96 96 #define PIPE3TRE 0x98 97 #define PIPE3TRN 0x9A 98 #define PIPE4TRE 0x9C 99 #define PIPE4TRN 0x9E 100 #define PIPE5TRE 0xA0 101 #define PIPE5TRN 0xA2 102 #define DEVADD0 0xD0 103 #define DEVADD1 0xD2 104 #define DEVADD2 0xD4 105 #define DEVADD3 0xD6 106 #define DEVADD4 0xD8 107 #define DEVADD5 0xDA 108 #define DEVADD6 0xDC 109 #define DEVADD7 0xDE 110 #define DEVADD8 0xE0 111 #define DEVADD9 0xE2 112 #define DEVADDA 0xE4 113 114 /* System Configuration Control Register */ 115 #define XTAL 0xC000 /* b15-14: Crystal selection */ 116 #define XTAL48 0x8000 /* 48MHz */ 117 #define XTAL24 0x4000 /* 24MHz */ 118 #define XTAL12 0x0000 /* 12MHz */ 119 #define XCKE 0x2000 /* b13: External clock enable */ 120 #define PLLC 0x0800 /* b11: PLL control */ 121 #define SCKE 0x0400 /* b10: USB clock enable */ 122 #define PCSDIS 0x0200 /* b9: not CS wakeup */ 123 #define LPSME 0x0100 /* b8: Low power sleep mode */ 124 #define HSE 0x0080 /* b7: Hi-speed enable */ 125 #define DCFM 0x0040 /* b6: Controller function select */ 126 #define DRPD 0x0020 /* b5: D+/- pull down control */ 127 #define DPRPU 0x0010 /* b4: D+ pull up control */ 128 #define USBE 0x0001 /* b0: USB module operation enable */ 129 130 /* System Configuration Status Register */ 131 #define OVCBIT 0x8000 /* b15-14: Over-current bit */ 132 #define OVCMON 0xC000 /* b15-14: Over-current monitor */ 133 #define SOFEA 0x0020 /* b5: SOF monitor */ 134 #define IDMON 0x0004 /* b3: ID-pin monitor */ 135 #define LNST 0x0003 /* b1-0: D+, D- line status */ 136 #define SE1 0x0003 /* SE1 */ 137 #define FS_KSTS 0x0002 /* Full-Speed K State */ 138 #define FS_JSTS 0x0001 /* Full-Speed J State */ 139 #define LS_JSTS 0x0002 /* Low-Speed J State */ 140 #define LS_KSTS 0x0001 /* Low-Speed K State */ 141 #define SE0 0x0000 /* SE0 */ 142 143 /* Device State Control Register */ 144 #define EXTLP0 0x0400 /* b10: External port */ 145 #define VBOUT 0x0200 /* b9: VBUS output */ 146 #define WKUP 0x0100 /* b8: Remote wakeup */ 147 #define RWUPE 0x0080 /* b7: Remote wakeup sense */ 148 #define USBRST 0x0040 /* b6: USB reset enable */ 149 #define RESUME 0x0020 /* b5: Resume enable */ 150 #define UACT 0x0010 /* b4: USB bus enable */ 151 #define RHST 0x0007 /* b1-0: Reset handshake status */ 152 #define HSPROC 0x0004 /* HS handshake is processing */ 153 #define HSMODE 0x0003 /* Hi-Speed mode */ 154 #define FSMODE 0x0002 /* Full-Speed mode */ 155 #define LSMODE 0x0001 /* Low-Speed mode */ 156 #define UNDECID 0x0000 /* Undecided */ 157 158 /* Test Mode Register */ 159 #define UTST 0x000F /* b3-0: Test select */ 160 #define H_TST_PACKET 0x000C /* HOST TEST Packet */ 161 #define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ 162 #define H_TST_K 0x000A /* HOST TEST K */ 163 #define H_TST_J 0x0009 /* HOST TEST J */ 164 #define H_TST_NORMAL 0x0000 /* HOST Normal Mode */ 165 #define P_TST_PACKET 0x0004 /* PERI TEST Packet */ 166 #define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ 167 #define P_TST_K 0x0002 /* PERI TEST K */ 168 #define P_TST_J 0x0001 /* PERI TEST J */ 169 #define P_TST_NORMAL 0x0000 /* PERI Normal Mode */ 170 171 /* Data Pin Configuration Register */ 172 #define LDRV 0x8000 /* b15: Drive Current Adjust */ 173 #define VIF1 0x0000 /* VIF = 1.8V */ 174 #define VIF3 0x8000 /* VIF = 3.3V */ 175 #define INTA 0x0001 /* b1: USB INT-pin active */ 176 177 /* DMAx Pin Configuration Register */ 178 #define DREQA 0x4000 /* b14: Dreq active select */ 179 #define BURST 0x2000 /* b13: Burst mode */ 180 #define DACKA 0x0400 /* b10: Dack active select */ 181 #define DFORM 0x0380 /* b9-7: DMA mode select */ 182 #define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ 183 #define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ 184 #define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ 185 #define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ 186 #define DENDA 0x0040 /* b6: Dend active select */ 187 #define PKTM 0x0020 /* b5: Packet mode */ 188 #define DENDE 0x0010 /* b4: Dend enable */ 189 #define OBUS 0x0004 /* b2: OUTbus mode */ 190 191 /* CFIFO/DxFIFO Port Select Register */ 192 #define RCNT 0x8000 /* b15: Read count mode */ 193 #define REW 0x4000 /* b14: Buffer rewind */ 194 #define DCLRM 0x2000 /* b13: DMA buffer clear mode */ 195 #define DREQE 0x1000 /* b12: DREQ output enable */ 196 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) 197 #define MBW 0x0800 198 #else 199 #define MBW 0x0400 /* b10: Maximum bit width for FIFO access */ 200 #endif 201 #define MBW_8 0x0000 /* 8bit */ 202 #define MBW_16 0x0400 /* 16bit */ 203 #define BIGEND 0x0100 /* b8: Big endian mode */ 204 #define BYTE_LITTLE 0x0000 /* little dendian */ 205 #define BYTE_BIG 0x0100 /* big endifan */ 206 #define ISEL 0x0020 /* b5: DCP FIFO port direction select */ 207 #define CURPIPE 0x000F /* b2-0: PIPE select */ 208 209 /* CFIFO/DxFIFO Port Control Register */ 210 #define BVAL 0x8000 /* b15: Buffer valid flag */ 211 #define BCLR 0x4000 /* b14: Buffer clear */ 212 #define FRDY 0x2000 /* b13: FIFO ready */ 213 #define DTLN 0x0FFF /* b11-0: FIFO received data length */ 214 215 /* Interrupt Enable Register 0 */ 216 #define VBSE 0x8000 /* b15: VBUS interrupt */ 217 #define RSME 0x4000 /* b14: Resume interrupt */ 218 #define SOFE 0x2000 /* b13: Frame update interrupt */ 219 #define DVSE 0x1000 /* b12: Device state transition interrupt */ 220 #define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ 221 #define BEMPE 0x0400 /* b10: Buffer empty interrupt */ 222 #define NRDYE 0x0200 /* b9: Buffer not ready interrupt */ 223 #define BRDYE 0x0100 /* b8: Buffer ready interrupt */ 224 225 /* Interrupt Enable Register 1 */ 226 #define OVRCRE 0x8000 /* b15: Over-current interrupt */ 227 #define BCHGE 0x4000 /* b14: USB us chenge interrupt */ 228 #define DTCHE 0x1000 /* b12: Detach sense interrupt */ 229 #define ATTCHE 0x0800 /* b11: Attach sense interrupt */ 230 #define EOFERRE 0x0040 /* b6: EOF error interrupt */ 231 #define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ 232 #define SACKE 0x0010 /* b4: SETUP ACK interrupt */ 233 234 /* BRDY Interrupt Enable/Status Register */ 235 #define BRDY9 0x0200 /* b9: PIPE9 */ 236 #define BRDY8 0x0100 /* b8: PIPE8 */ 237 #define BRDY7 0x0080 /* b7: PIPE7 */ 238 #define BRDY6 0x0040 /* b6: PIPE6 */ 239 #define BRDY5 0x0020 /* b5: PIPE5 */ 240 #define BRDY4 0x0010 /* b4: PIPE4 */ 241 #define BRDY3 0x0008 /* b3: PIPE3 */ 242 #define BRDY2 0x0004 /* b2: PIPE2 */ 243 #define BRDY1 0x0002 /* b1: PIPE1 */ 244 #define BRDY0 0x0001 /* b1: PIPE0 */ 245 246 /* NRDY Interrupt Enable/Status Register */ 247 #define NRDY9 0x0200 /* b9: PIPE9 */ 248 #define NRDY8 0x0100 /* b8: PIPE8 */ 249 #define NRDY7 0x0080 /* b7: PIPE7 */ 250 #define NRDY6 0x0040 /* b6: PIPE6 */ 251 #define NRDY5 0x0020 /* b5: PIPE5 */ 252 #define NRDY4 0x0010 /* b4: PIPE4 */ 253 #define NRDY3 0x0008 /* b3: PIPE3 */ 254 #define NRDY2 0x0004 /* b2: PIPE2 */ 255 #define NRDY1 0x0002 /* b1: PIPE1 */ 256 #define NRDY0 0x0001 /* b1: PIPE0 */ 257 258 /* BEMP Interrupt Enable/Status Register */ 259 #define BEMP9 0x0200 /* b9: PIPE9 */ 260 #define BEMP8 0x0100 /* b8: PIPE8 */ 261 #define BEMP7 0x0080 /* b7: PIPE7 */ 262 #define BEMP6 0x0040 /* b6: PIPE6 */ 263 #define BEMP5 0x0020 /* b5: PIPE5 */ 264 #define BEMP4 0x0010 /* b4: PIPE4 */ 265 #define BEMP3 0x0008 /* b3: PIPE3 */ 266 #define BEMP2 0x0004 /* b2: PIPE2 */ 267 #define BEMP1 0x0002 /* b1: PIPE1 */ 268 #define BEMP0 0x0001 /* b0: PIPE0 */ 269 270 /* SOF Pin Configuration Register */ 271 #define TRNENSEL 0x0100 /* b8: Select transaction enable period */ 272 #define BRDYM 0x0040 /* b6: BRDY clear timing */ 273 #define INTL 0x0020 /* b5: Interrupt sense select */ 274 #define EDGESTS 0x0010 /* b4: */ 275 #define SOFMODE 0x000C /* b3-2: SOF pin select */ 276 #define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */ 277 #define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ 278 #define SOF_DISABLE 0x0000 /* SOF OUT Disable */ 279 280 /* Interrupt Status Register 0 */ 281 #define VBINT 0x8000 /* b15: VBUS interrupt */ 282 #define RESM 0x4000 /* b14: Resume interrupt */ 283 #define SOFR 0x2000 /* b13: SOF frame update interrupt */ 284 #define DVST 0x1000 /* b12: Device state transition interrupt */ 285 #define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ 286 #define BEMP 0x0400 /* b10: Buffer empty interrupt */ 287 #define NRDY 0x0200 /* b9: Buffer not ready interrupt */ 288 #define BRDY 0x0100 /* b8: Buffer ready interrupt */ 289 #define VBSTS 0x0080 /* b7: VBUS input port */ 290 #define DVSQ 0x0070 /* b6-4: Device state */ 291 #define DS_SPD_CNFG 0x0070 /* Suspend Configured */ 292 #define DS_SPD_ADDR 0x0060 /* Suspend Address */ 293 #define DS_SPD_DFLT 0x0050 /* Suspend Default */ 294 #define DS_SPD_POWR 0x0040 /* Suspend Powered */ 295 #define DS_SUSP 0x0040 /* Suspend */ 296 #define DS_CNFG 0x0030 /* Configured */ 297 #define DS_ADDS 0x0020 /* Address */ 298 #define DS_DFLT 0x0010 /* Default */ 299 #define DS_POWR 0x0000 /* Powered */ 300 #define DVSQS 0x0030 /* b5-4: Device state */ 301 #define VALID 0x0008 /* b3: Setup packet detected flag */ 302 #define CTSQ 0x0007 /* b2-0: Control transfer stage */ 303 #define CS_SQER 0x0006 /* Sequence error */ 304 #define CS_WRND 0x0005 /* Control write nodata status stage */ 305 #define CS_WRSS 0x0004 /* Control write status stage */ 306 #define CS_WRDS 0x0003 /* Control write data stage */ 307 #define CS_RDSS 0x0002 /* Control read status stage */ 308 #define CS_RDDS 0x0001 /* Control read data stage */ 309 #define CS_IDST 0x0000 /* Idle or setup stage */ 310 311 /* Interrupt Status Register 1 */ 312 #define OVRCR 0x8000 /* b15: Over-current interrupt */ 313 #define BCHG 0x4000 /* b14: USB bus chenge interrupt */ 314 #define DTCH 0x1000 /* b12: Detach sense interrupt */ 315 #define ATTCH 0x0800 /* b11: Attach sense interrupt */ 316 #define EOFERR 0x0040 /* b6: EOF-error interrupt */ 317 #define SIGN 0x0020 /* b5: Setup ignore interrupt */ 318 #define SACK 0x0010 /* b4: Setup acknowledge interrupt */ 319 320 /* Frame Number Register */ 321 #define OVRN 0x8000 /* b15: Overrun error */ 322 #define CRCE 0x4000 /* b14: Received data error */ 323 #define FRNM 0x07FF /* b10-0: Frame number */ 324 325 /* Micro Frame Number Register */ 326 #define UFRNM 0x0007 /* b2-0: Micro frame number */ 327 328 /* Default Control Pipe Maxpacket Size Register */ 329 /* Pipe Maxpacket Size Register */ 330 #define DEVSEL 0xF000 /* b15-14: Device address select */ 331 #define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ 332 333 /* Default Control Pipe Control Register */ 334 #define BSTS 0x8000 /* b15: Buffer status */ 335 #define SUREQ 0x4000 /* b14: Send USB request */ 336 #define CSCLR 0x2000 /* b13: complete-split status clear */ 337 #define CSSTS 0x1000 /* b12: complete-split status */ 338 #define SUREQCLR 0x0800 /* b11: stop setup request */ 339 #define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ 340 #define SQSET 0x0080 /* b7: Sequence toggle bit set */ 341 #define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ 342 #define PBUSY 0x0020 /* b5: pipe busy */ 343 #define PINGE 0x0010 /* b4: ping enable */ 344 #define CCPL 0x0004 /* b2: Enable control transfer complete */ 345 #define PID 0x0003 /* b1-0: Response PID */ 346 #define PID_STALL11 0x0003 /* STALL */ 347 #define PID_STALL 0x0002 /* STALL */ 348 #define PID_BUF 0x0001 /* BUF */ 349 #define PID_NAK 0x0000 /* NAK */ 350 351 /* Pipe Window Select Register */ 352 #define PIPENM 0x0007 /* b2-0: Pipe select */ 353 354 /* Pipe Configuration Register */ 355 #define R8A66597_TYP 0xC000 /* b15-14: Transfer type */ 356 #define R8A66597_ISO 0xC000 /* Isochronous */ 357 #define R8A66597_INT 0x8000 /* Interrupt */ 358 #define R8A66597_BULK 0x4000 /* Bulk */ 359 #define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ 360 #define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */ 361 #define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */ 362 #define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */ 363 #define R8A66597_DIR 0x0010 /* b4: Transfer direction select */ 364 #define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */ 365 366 /* Pipe Buffer Configuration Register */ 367 #define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ 368 #define BUFNMB 0x007F /* b6-0: Pipe buffer number */ 369 #define PIPE0BUF 256 370 #define PIPExBUF 64 371 372 /* Pipe Maxpacket Size Register */ 373 #define MXPS 0x07FF /* b10-0: Maxpacket size */ 374 375 /* Pipe Cycle Configuration Register */ 376 #define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ 377 #define IITV 0x0007 /* b2-0: Isochronous interval */ 378 379 /* Pipex Control Register */ 380 #define BSTS 0x8000 /* b15: Buffer status */ 381 #define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ 382 #define CSCLR 0x2000 /* b13: complete-split status clear */ 383 #define CSSTS 0x1000 /* b12: complete-split status */ 384 #define ATREPM 0x0400 /* b10: Auto repeat mode */ 385 #define ACLRM 0x0200 /* b9: Out buffer auto clear mode */ 386 #define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ 387 #define SQSET 0x0080 /* b7: Sequence toggle bit set */ 388 #define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ 389 #define PBUSY 0x0020 /* b5: pipe busy */ 390 #define PID 0x0003 /* b1-0: Response PID */ 391 392 /* PIPExTRE */ 393 #define TRENB 0x0200 /* b9: Transaction counter enable */ 394 #define TRCLR 0x0100 /* b8: Transaction counter clear */ 395 396 /* PIPExTRN */ 397 #define TRNCNT 0xFFFF /* b15-0: Transaction counter */ 398 399 /* DEVADDx */ 400 #define UPPHUB 0x7800 401 #define HUBPORT 0x0700 402 #define USBSPD 0x00C0 403 #define RTPORT 0x0001 404 405 #define R8A66597_MAX_NUM_PIPE 10 406 #define R8A66597_BUF_BSIZE 8 407 #define R8A66597_MAX_DEVICE 10 408 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) 409 #define R8A66597_MAX_ROOT_HUB 1 410 #else 411 #define R8A66597_MAX_ROOT_HUB 2 412 #endif 413 #define R8A66597_MAX_SAMPLING 5 414 #define R8A66597_RH_POLL_TIME 10 415 #define R8A66597_MAX_DMA_CHANNEL 2 416 #define R8A66597_PIPE_NO_DMA R8A66597_MAX_DMA_CHANNEL 417 #define check_bulk_or_isoc(pipenum) ((pipenum >= 1 && pipenum <= 5)) 418 #define check_interrupt(pipenum) ((pipenum >= 6 && pipenum <= 9)) 419 #define make_devsel(addr) (addr << 12) 420 421 struct r8a66597_pipe_info { 422 unsigned long timer_interval; 423 u16 pipenum; 424 u16 address; /* R8A66597 HCD usb address */ 425 u16 epnum; 426 u16 maxpacket; 427 u16 type; 428 u16 bufnum; 429 u16 buf_bsize; 430 u16 interval; 431 u16 dir_in; 432 }; 433 434 struct r8a66597_pipe { 435 struct r8a66597_pipe_info info; 436 437 unsigned long fifoaddr; 438 unsigned long fifosel; 439 unsigned long fifoctr; 440 unsigned long pipectr; 441 unsigned long pipetre; 442 unsigned long pipetrn; 443 }; 444 445 struct r8a66597_td { 446 struct r8a66597_pipe *pipe; 447 struct urb *urb; 448 struct list_head queue; 449 450 u16 type; 451 u16 pipenum; 452 int iso_cnt; 453 454 u16 address; /* R8A66597's USB address */ 455 u16 maxpacket; 456 457 unsigned zero_packet:1; 458 unsigned short_packet:1; 459 unsigned set_address:1; 460 }; 461 462 struct r8a66597_device { 463 u16 address; /* R8A66597's USB address */ 464 u16 hub_port; 465 u16 root_port; 466 467 unsigned short ep_in_toggle; 468 unsigned short ep_out_toggle; 469 unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE]; 470 unsigned char dma_map; 471 472 enum usb_device_state state; 473 474 struct usb_device *udev; 475 int usb_address; 476 struct list_head device_list; 477 }; 478 479 struct r8a66597_root_hub { 480 u32 port; 481 u16 old_syssts; 482 int scount; 483 484 struct r8a66597_device *dev; 485 }; 486 487 struct r8a66597 { 488 spinlock_t lock; 489 unsigned long reg; 490 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) 491 struct clk *clk; 492 #endif 493 struct r8a66597_platdata *pdata; 494 struct r8a66597_device device0; 495 struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB]; 496 struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE]; 497 498 struct timer_list rh_timer; 499 struct timer_list td_timer[R8A66597_MAX_NUM_PIPE]; 500 struct timer_list interval_timer[R8A66597_MAX_NUM_PIPE]; 501 502 unsigned short address_map; 503 unsigned short timeout_map; 504 unsigned short interval_map; 505 unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE]; 506 unsigned char dma_map; 507 508 struct list_head child_device; 509 unsigned long child_connect_map[4]; 510 511 unsigned bus_suspended:1; 512 unsigned irq_sense_low:1; 513 }; 514 515 static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd) 516 { 517 return (struct r8a66597 *)(hcd->hcd_priv); 518 } 519 520 static inline struct usb_hcd *r8a66597_to_hcd(struct r8a66597 *r8a66597) 521 { 522 return container_of((void *)r8a66597, struct usb_hcd, hcd_priv); 523 } 524 525 static inline struct r8a66597_td *r8a66597_get_td(struct r8a66597 *r8a66597, 526 u16 pipenum) 527 { 528 if (unlikely(list_empty(&r8a66597->pipe_queue[pipenum]))) 529 return NULL; 530 531 return list_entry(r8a66597->pipe_queue[pipenum].next, 532 struct r8a66597_td, queue); 533 } 534 535 static inline struct urb *r8a66597_get_urb(struct r8a66597 *r8a66597, 536 u16 pipenum) 537 { 538 struct r8a66597_td *td; 539 540 td = r8a66597_get_td(r8a66597, pipenum); 541 return (td ? td->urb : NULL); 542 } 543 544 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset) 545 { 546 return inw(r8a66597->reg + offset); 547 } 548 549 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, 550 unsigned long offset, u16 *buf, 551 int len) 552 { 553 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) 554 unsigned long fifoaddr = r8a66597->reg + offset; 555 unsigned long count; 556 557 count = len / 4; 558 insl(fifoaddr, buf, count); 559 560 if (len & 0x00000003) { 561 unsigned long tmp = inl(fifoaddr); 562 memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03); 563 } 564 #else 565 len = (len + 1) / 2; 566 insw(r8a66597->reg + offset, buf, len); 567 #endif 568 } 569 570 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, 571 unsigned long offset) 572 { 573 outw(val, r8a66597->reg + offset); 574 } 575 576 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, 577 unsigned long offset, u16 *buf, 578 int len) 579 { 580 unsigned long fifoaddr = r8a66597->reg + offset; 581 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) 582 unsigned long count; 583 unsigned char *pb; 584 int i; 585 586 count = len / 4; 587 outsl(fifoaddr, buf, count); 588 589 if (len & 0x00000003) { 590 pb = (unsigned char *)buf + count * 4; 591 for (i = 0; i < (len & 0x00000003); i++) { 592 if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) 593 outb(pb[i], fifoaddr + i); 594 else 595 outb(pb[i], fifoaddr + 3 - i); 596 } 597 } 598 #else 599 int odd = len & 0x0001; 600 601 len = len / 2; 602 outsw(fifoaddr, buf, len); 603 if (unlikely(odd)) { 604 buf = &buf[len]; 605 outb((unsigned char)*buf, fifoaddr); 606 } 607 #endif 608 } 609 610 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, 611 u16 val, u16 pat, unsigned long offset) 612 { 613 u16 tmp; 614 tmp = r8a66597_read(r8a66597, offset); 615 tmp = tmp & (~pat); 616 tmp = tmp | val; 617 r8a66597_write(r8a66597, tmp, offset); 618 } 619 620 #define r8a66597_bclr(r8a66597, val, offset) \ 621 r8a66597_mdfy(r8a66597, 0, val, offset) 622 #define r8a66597_bset(r8a66597, val, offset) \ 623 r8a66597_mdfy(r8a66597, val, 0, offset) 624 625 static inline unsigned long get_syscfg_reg(int port) 626 { 627 return port == 0 ? SYSCFG0 : SYSCFG1; 628 } 629 630 static inline unsigned long get_syssts_reg(int port) 631 { 632 return port == 0 ? SYSSTS0 : SYSSTS1; 633 } 634 635 static inline unsigned long get_dvstctr_reg(int port) 636 { 637 return port == 0 ? DVSTCTR0 : DVSTCTR1; 638 } 639 640 static inline unsigned long get_dmacfg_reg(int port) 641 { 642 return port == 0 ? DMA0CFG : DMA1CFG; 643 } 644 645 static inline unsigned long get_intenb_reg(int port) 646 { 647 return port == 0 ? INTENB1 : INTENB2; 648 } 649 650 static inline unsigned long get_intsts_reg(int port) 651 { 652 return port == 0 ? INTSTS1 : INTSTS2; 653 } 654 655 static inline u16 get_rh_usb_speed(struct r8a66597 *r8a66597, int port) 656 { 657 unsigned long dvstctr_reg = get_dvstctr_reg(port); 658 659 return r8a66597_read(r8a66597, dvstctr_reg) & RHST; 660 } 661 662 static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port, 663 int power) 664 { 665 unsigned long dvstctr_reg = get_dvstctr_reg(port); 666 667 if (r8a66597->pdata->port_power) { 668 r8a66597->pdata->port_power(port, power); 669 } else { 670 if (power) 671 r8a66597_bset(r8a66597, VBOUT, dvstctr_reg); 672 else 673 r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg); 674 } 675 } 676 677 static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) 678 { 679 u16 clock = 0; 680 681 switch (pdata->xtal) { 682 case R8A66597_PLATDATA_XTAL_12MHZ: 683 clock = XTAL12; 684 break; 685 case R8A66597_PLATDATA_XTAL_24MHZ: 686 clock = XTAL24; 687 break; 688 case R8A66597_PLATDATA_XTAL_48MHZ: 689 clock = XTAL48; 690 break; 691 default: 692 printk(KERN_ERR "r8a66597: platdata clock is wrong.\n"); 693 break; 694 } 695 696 return clock; 697 } 698 699 #define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2) 700 #define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4) 701 #define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4) 702 #define get_devadd_addr(address) (DEVADD0 + address * 2) 703 704 #define enable_irq_ready(r8a66597, pipenum) \ 705 enable_pipe_irq(r8a66597, pipenum, BRDYENB) 706 #define disable_irq_ready(r8a66597, pipenum) \ 707 disable_pipe_irq(r8a66597, pipenum, BRDYENB) 708 #define enable_irq_empty(r8a66597, pipenum) \ 709 enable_pipe_irq(r8a66597, pipenum, BEMPENB) 710 #define disable_irq_empty(r8a66597, pipenum) \ 711 disable_pipe_irq(r8a66597, pipenum, BEMPENB) 712 #define enable_irq_nrdy(r8a66597, pipenum) \ 713 enable_pipe_irq(r8a66597, pipenum, NRDYENB) 714 #define disable_irq_nrdy(r8a66597, pipenum) \ 715 disable_pipe_irq(r8a66597, pipenum, NRDYENB) 716 717 #endif /* __R8A66597_H__ */ 718 719