1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 6 * 7 * This file is licenced under the GPL. 8 */ 9 10 /* 11 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to 12 * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the 13 * host controller implementation. 14 */ 15 typedef __u32 __bitwise __hc32; 16 typedef __u16 __bitwise __hc16; 17 18 /* 19 * OHCI Endpoint Descriptor (ED) ... holds TD queue 20 * See OHCI spec, section 4.2 21 * 22 * This is a "Queue Head" for those transfers, which is why 23 * both EHCI and UHCI call similar structures a "QH". 24 */ 25 struct ed { 26 /* first fields are hardware-specified */ 27 __hc32 hwINFO; /* endpoint config bitmap */ 28 /* info bits defined by hcd */ 29 #define ED_DEQUEUE (1 << 27) 30 /* info bits defined by the hardware */ 31 #define ED_ISO (1 << 15) 32 #define ED_SKIP (1 << 14) 33 #define ED_LOWSPEED (1 << 13) 34 #define ED_OUT (0x01 << 11) 35 #define ED_IN (0x02 << 11) 36 __hc32 hwTailP; /* tail of TD list */ 37 __hc32 hwHeadP; /* head of TD list (hc r/w) */ 38 #define ED_C (0x02) /* toggle carry */ 39 #define ED_H (0x01) /* halted */ 40 __hc32 hwNextED; /* next ED in list */ 41 42 /* rest are purely for the driver's use */ 43 dma_addr_t dma; /* addr of ED */ 44 struct td *dummy; /* next TD to activate */ 45 46 /* host's view of schedule */ 47 struct ed *ed_next; /* on schedule or rm_list */ 48 struct ed *ed_prev; /* for non-interrupt EDs */ 49 struct list_head td_list; /* "shadow list" of our TDs */ 50 struct list_head in_use_list; 51 52 /* create --> IDLE --> OPER --> ... --> IDLE --> destroy 53 * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... 54 */ 55 u8 state; /* ED_{IDLE,UNLINK,OPER} */ 56 #define ED_IDLE 0x00 /* NOT linked to HC */ 57 #define ED_UNLINK 0x01 /* being unlinked from hc */ 58 #define ED_OPER 0x02 /* IS linked to hc */ 59 60 u8 type; /* PIPE_{BULK,...} */ 61 62 /* periodic scheduling params (for intr and iso) */ 63 u8 branch; 64 u16 interval; 65 u16 load; 66 u16 last_iso; /* iso only */ 67 68 /* HC may see EDs on rm_list until next frame (frame_no == tick) */ 69 u16 tick; 70 71 /* Detect TDs not added to the done queue */ 72 unsigned takeback_wdh_cnt; 73 struct td *pending_td; 74 #define OKAY_TO_TAKEBACK(ohci, ed) \ 75 ((int) (ohci->wdh_cnt - ed->takeback_wdh_cnt) >= 0) 76 77 } __attribute__ ((aligned(16))); 78 79 #define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */ 80 81 82 /* 83 * OHCI Transfer Descriptor (TD) ... one per transfer segment 84 * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) 85 * and 4.3.2 (iso) 86 */ 87 struct td { 88 /* first fields are hardware-specified */ 89 __hc32 hwINFO; /* transfer info bitmask */ 90 91 /* hwINFO bits for both general and iso tds: */ 92 #define TD_CC 0xf0000000 /* condition code */ 93 #define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) 94 //#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) 95 #define TD_DI 0x00E00000 /* frames before interrupt */ 96 #define TD_DI_SET(X) (((X) & 0x07)<< 21) 97 /* these two bits are available for definition/use by HCDs in both 98 * general and iso tds ... others are available for only one type 99 */ 100 #define TD_DONE 0x00020000 /* retired to donelist */ 101 #define TD_ISO 0x00010000 /* copy of ED_ISO */ 102 103 /* hwINFO bits for general tds: */ 104 #define TD_EC 0x0C000000 /* error count */ 105 #define TD_T 0x03000000 /* data toggle state */ 106 #define TD_T_DATA0 0x02000000 /* DATA0 */ 107 #define TD_T_DATA1 0x03000000 /* DATA1 */ 108 #define TD_T_TOGGLE 0x00000000 /* uses ED_C */ 109 #define TD_DP 0x00180000 /* direction/pid */ 110 #define TD_DP_SETUP 0x00000000 /* SETUP pid */ 111 #define TD_DP_IN 0x00100000 /* IN pid */ 112 #define TD_DP_OUT 0x00080000 /* OUT pid */ 113 /* 0x00180000 rsvd */ 114 #define TD_R 0x00040000 /* round: short packets OK? */ 115 116 /* (no hwINFO #defines yet for iso tds) */ 117 118 __hc32 hwCBP; /* Current Buffer Pointer (or 0) */ 119 __hc32 hwNextTD; /* Next TD Pointer */ 120 __hc32 hwBE; /* Memory Buffer End Pointer */ 121 122 /* PSW is only for ISO. Only 1 PSW entry is used, but on 123 * big-endian PPC hardware that's the second entry. 124 */ 125 #define MAXPSW 2 126 __hc16 hwPSW [MAXPSW]; 127 128 /* rest are purely for the driver's use */ 129 __u8 index; 130 struct ed *ed; 131 struct td *td_hash; /* dma-->td hashtable */ 132 struct td *next_dl_td; 133 struct urb *urb; 134 135 dma_addr_t td_dma; /* addr of this TD */ 136 dma_addr_t data_dma; /* addr of data it points to */ 137 138 struct list_head td_list; /* "shadow list", TDs on same ED */ 139 } __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */ 140 141 #define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */ 142 143 /* 144 * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW 145 */ 146 #define TD_CC_NOERROR 0x00 147 #define TD_CC_CRC 0x01 148 #define TD_CC_BITSTUFFING 0x02 149 #define TD_CC_DATATOGGLEM 0x03 150 #define TD_CC_STALL 0x04 151 #define TD_DEVNOTRESP 0x05 152 #define TD_PIDCHECKFAIL 0x06 153 #define TD_UNEXPECTEDPID 0x07 154 #define TD_DATAOVERRUN 0x08 155 #define TD_DATAUNDERRUN 0x09 156 /* 0x0A, 0x0B reserved for hardware */ 157 #define TD_BUFFEROVERRUN 0x0C 158 #define TD_BUFFERUNDERRUN 0x0D 159 /* 0x0E, 0x0F reserved for HCD */ 160 #define TD_NOTACCESSED 0x0F 161 162 163 /* map OHCI TD status codes (CC) to errno values */ 164 static const int cc_to_error [16] = { 165 /* No Error */ 0, 166 /* CRC Error */ -EILSEQ, 167 /* Bit Stuff */ -EPROTO, 168 /* Data Togg */ -EILSEQ, 169 /* Stall */ -EPIPE, 170 /* DevNotResp */ -ETIME, 171 /* PIDCheck */ -EPROTO, 172 /* UnExpPID */ -EPROTO, 173 /* DataOver */ -EOVERFLOW, 174 /* DataUnder */ -EREMOTEIO, 175 /* (for hw) */ -EIO, 176 /* (for hw) */ -EIO, 177 /* BufferOver */ -ECOMM, 178 /* BuffUnder */ -ENOSR, 179 /* (for HCD) */ -EALREADY, 180 /* (for HCD) */ -EALREADY 181 }; 182 183 184 /* 185 * The HCCA (Host Controller Communications Area) is a 256 byte 186 * structure defined section 4.4.1 of the OHCI spec. The HC is 187 * told the base address of it. It must be 256-byte aligned. 188 */ 189 struct ohci_hcca { 190 #define NUM_INTS 32 191 __hc32 int_table [NUM_INTS]; /* periodic schedule */ 192 193 /* 194 * OHCI defines u16 frame_no, followed by u16 zero pad. 195 * Since some processors can't do 16 bit bus accesses, 196 * portable access must be a 32 bits wide. 197 */ 198 __hc32 frame_no; /* current frame number */ 199 __hc32 done_head; /* info returned for an interrupt */ 200 u8 reserved_for_hc [116]; 201 u8 what [4]; /* spec only identifies 252 bytes :) */ 202 } __attribute__ ((aligned(256))); 203 204 /* 205 * This is the structure of the OHCI controller's memory mapped I/O region. 206 * You must use readl() and writel() (in <asm/io.h>) to access these fields!! 207 * Layout is in section 7 (and appendix B) of the spec. 208 */ 209 struct ohci_regs { 210 /* control and status registers (section 7.1) */ 211 __hc32 revision; 212 __hc32 control; 213 __hc32 cmdstatus; 214 __hc32 intrstatus; 215 __hc32 intrenable; 216 __hc32 intrdisable; 217 218 /* memory pointers (section 7.2) */ 219 __hc32 hcca; 220 __hc32 ed_periodcurrent; 221 __hc32 ed_controlhead; 222 __hc32 ed_controlcurrent; 223 __hc32 ed_bulkhead; 224 __hc32 ed_bulkcurrent; 225 __hc32 donehead; 226 227 /* frame counters (section 7.3) */ 228 __hc32 fminterval; 229 __hc32 fmremaining; 230 __hc32 fmnumber; 231 __hc32 periodicstart; 232 __hc32 lsthresh; 233 234 /* Root hub ports (section 7.4) */ 235 struct ohci_roothub_regs { 236 __hc32 a; 237 __hc32 b; 238 __hc32 status; 239 #define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */ 240 __hc32 portstatus [MAX_ROOT_PORTS]; 241 } roothub; 242 243 /* and optional "legacy support" registers (appendix B) at 0x0100 */ 244 245 } __attribute__ ((aligned(32))); 246 247 248 /* OHCI CONTROL AND STATUS REGISTER MASKS */ 249 250 /* 251 * HcControl (control) register masks 252 */ 253 #define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ 254 #define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ 255 #define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ 256 #define OHCI_CTRL_CLE (1 << 4) /* control list enable */ 257 #define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ 258 #define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ 259 #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ 260 #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ 261 #define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ 262 263 /* pre-shifted values for HCFS */ 264 # define OHCI_USB_RESET (0 << 6) 265 # define OHCI_USB_RESUME (1 << 6) 266 # define OHCI_USB_OPER (2 << 6) 267 # define OHCI_USB_SUSPEND (3 << 6) 268 269 /* 270 * HcCommandStatus (cmdstatus) register masks 271 */ 272 #define OHCI_HCR (1 << 0) /* host controller reset */ 273 #define OHCI_CLF (1 << 1) /* control list filled */ 274 #define OHCI_BLF (1 << 2) /* bulk list filled */ 275 #define OHCI_OCR (1 << 3) /* ownership change request */ 276 #define OHCI_SOC (3 << 16) /* scheduling overrun count */ 277 278 /* 279 * masks used with interrupt registers: 280 * HcInterruptStatus (intrstatus) 281 * HcInterruptEnable (intrenable) 282 * HcInterruptDisable (intrdisable) 283 */ 284 #define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ 285 #define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ 286 #define OHCI_INTR_SF (1 << 2) /* start frame */ 287 #define OHCI_INTR_RD (1 << 3) /* resume detect */ 288 #define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ 289 #define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ 290 #define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ 291 #define OHCI_INTR_OC (1 << 30) /* ownership change */ 292 #define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ 293 294 295 /* OHCI ROOT HUB REGISTER MASKS */ 296 297 /* roothub.portstatus [i] bits */ 298 #define RH_PS_CCS 0x00000001 /* current connect status */ 299 #define RH_PS_PES 0x00000002 /* port enable status*/ 300 #define RH_PS_PSS 0x00000004 /* port suspend status */ 301 #define RH_PS_POCI 0x00000008 /* port over current indicator */ 302 #define RH_PS_PRS 0x00000010 /* port reset status */ 303 #define RH_PS_PPS 0x00000100 /* port power status */ 304 #define RH_PS_LSDA 0x00000200 /* low speed device attached */ 305 #define RH_PS_CSC 0x00010000 /* connect status change */ 306 #define RH_PS_PESC 0x00020000 /* port enable status change */ 307 #define RH_PS_PSSC 0x00040000 /* port suspend status change */ 308 #define RH_PS_OCIC 0x00080000 /* over current indicator change */ 309 #define RH_PS_PRSC 0x00100000 /* port reset status change */ 310 311 /* roothub.status bits */ 312 #define RH_HS_LPS 0x00000001 /* local power status */ 313 #define RH_HS_OCI 0x00000002 /* over current indicator */ 314 #define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ 315 #define RH_HS_LPSC 0x00010000 /* local power status change */ 316 #define RH_HS_OCIC 0x00020000 /* over current indicator change */ 317 #define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ 318 319 /* roothub.b masks */ 320 #define RH_B_DR 0x0000ffff /* device removable flags */ 321 #define RH_B_PPCM 0xffff0000 /* port power control mask */ 322 323 /* roothub.a masks */ 324 #define RH_A_NDP (0xff << 0) /* number of downstream ports */ 325 #define RH_A_PSM (1 << 8) /* power switching mode */ 326 #define RH_A_NPS (1 << 9) /* no power switching */ 327 #define RH_A_DT (1 << 10) /* device type (mbz) */ 328 #define RH_A_OCPM (1 << 11) /* over current protection mode */ 329 #define RH_A_NOCP (1 << 12) /* no over current protection */ 330 #define RH_A_POTPGT (0xff << 24) /* power on to power good time */ 331 332 333 /* hcd-private per-urb state */ 334 typedef struct urb_priv { 335 struct ed *ed; 336 u16 length; // # tds in this request 337 u16 td_cnt; // tds already serviced 338 struct list_head pending; 339 struct td *td [0]; // all TDs in this request 340 341 } urb_priv_t; 342 343 #define TD_HASH_SIZE 64 /* power'o'two */ 344 // sizeof (struct td) ~= 64 == 2^6 ... 345 #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) 346 347 348 /* 349 * This is the full ohci controller description 350 * 351 * Note how the "proper" USB information is just 352 * a subset of what the full implementation needs. (Linus) 353 */ 354 355 enum ohci_rh_state { 356 OHCI_RH_HALTED, 357 OHCI_RH_SUSPENDED, 358 OHCI_RH_RUNNING 359 }; 360 361 struct ohci_hcd { 362 spinlock_t lock; 363 364 /* 365 * I/O memory used to communicate with the HC (dma-consistent) 366 */ 367 struct ohci_regs __iomem *regs; 368 369 /* 370 * main memory used to communicate with the HC (dma-consistent). 371 * hcd adds to schedule for a live hc any time, but removals finish 372 * only at the start of the next frame. 373 */ 374 struct ohci_hcca *hcca; 375 dma_addr_t hcca_dma; 376 377 struct ed *ed_rm_list; /* to be removed */ 378 379 struct ed *ed_bulktail; /* last in bulk list */ 380 struct ed *ed_controltail; /* last in ctrl list */ 381 struct ed *periodic [NUM_INTS]; /* shadow int_table */ 382 383 void (*start_hnp)(struct ohci_hcd *ohci); 384 385 /* 386 * memory management for queue data structures 387 */ 388 struct dma_pool *td_cache; 389 struct dma_pool *ed_cache; 390 struct td *td_hash [TD_HASH_SIZE]; 391 struct td *dl_start, *dl_end; /* the done list */ 392 struct list_head pending; 393 struct list_head eds_in_use; /* all EDs with at least 1 TD */ 394 395 /* 396 * driver state 397 */ 398 enum ohci_rh_state rh_state; 399 int num_ports; 400 int load [NUM_INTS]; 401 u32 hc_control; /* copy of hc control reg */ 402 unsigned long next_statechange; /* suspend/resume */ 403 u32 fminterval; /* saved register */ 404 unsigned autostop:1; /* rh auto stopping/stopped */ 405 unsigned working:1; 406 unsigned restart_work:1; 407 408 unsigned long flags; /* for HC bugs */ 409 #define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ 410 #define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ 411 #define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */ 412 #define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */ 413 #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ 414 #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ 415 #define OHCI_QUIRK_NEC 0x40 /* lost interrupts */ 416 #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ 417 #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ 418 #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ 419 #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ 420 #define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */ 421 422 // there are also chip quirks/bugs in init logic 423 424 unsigned prev_frame_no; 425 unsigned wdh_cnt, prev_wdh_cnt; 426 u32 prev_donehead; 427 struct timer_list io_watchdog; 428 429 struct work_struct nec_work; /* Worker for NEC quirk */ 430 431 struct dentry *debug_dir; 432 struct dentry *debug_async; 433 struct dentry *debug_periodic; 434 struct dentry *debug_registers; 435 436 /* platform-specific data -- must come last */ 437 unsigned long priv[0] __aligned(sizeof(s64)); 438 439 }; 440 441 #ifdef CONFIG_PCI 442 static inline int quirk_nec(struct ohci_hcd *ohci) 443 { 444 return ohci->flags & OHCI_QUIRK_NEC; 445 } 446 static inline int quirk_zfmicro(struct ohci_hcd *ohci) 447 { 448 return ohci->flags & OHCI_QUIRK_ZFMICRO; 449 } 450 static inline int quirk_amdiso(struct ohci_hcd *ohci) 451 { 452 return ohci->flags & OHCI_QUIRK_AMD_PLL; 453 } 454 static inline int quirk_amdprefetch(struct ohci_hcd *ohci) 455 { 456 return ohci->flags & OHCI_QUIRK_AMD_PREFETCH; 457 } 458 #else 459 static inline int quirk_nec(struct ohci_hcd *ohci) 460 { 461 return 0; 462 } 463 static inline int quirk_zfmicro(struct ohci_hcd *ohci) 464 { 465 return 0; 466 } 467 static inline int quirk_amdiso(struct ohci_hcd *ohci) 468 { 469 return 0; 470 } 471 static inline int quirk_amdprefetch(struct ohci_hcd *ohci) 472 { 473 return 0; 474 } 475 #endif 476 477 /* convert between an hcd pointer and the corresponding ohci_hcd */ 478 static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd) 479 { 480 return (struct ohci_hcd *) (hcd->hcd_priv); 481 } 482 static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci) 483 { 484 return container_of ((void *) ohci, struct usb_hcd, hcd_priv); 485 } 486 487 /*-------------------------------------------------------------------------*/ 488 489 #define ohci_dbg(ohci, fmt, args...) \ 490 dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 491 #define ohci_err(ohci, fmt, args...) \ 492 dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 493 #define ohci_info(ohci, fmt, args...) \ 494 dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 495 #define ohci_warn(ohci, fmt, args...) \ 496 dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) 497 498 /*-------------------------------------------------------------------------*/ 499 500 /* 501 * While most USB host controllers implement their registers and 502 * in-memory communication descriptors in little-endian format, 503 * a minority (notably the IBM STB04XXX and the Motorola MPC5200 504 * processors) implement them in big endian format. 505 * 506 * In addition some more exotic implementations like the Toshiba 507 * Spider (aka SCC) cell southbridge are "mixed" endian, that is, 508 * they have a different endianness for registers vs. in-memory 509 * descriptors. 510 * 511 * This attempts to support either format at compile time without a 512 * runtime penalty, or both formats with the additional overhead 513 * of checking a flag bit. 514 * 515 * That leads to some tricky Kconfig rules howevber. There are 516 * different defaults based on some arch/ppc platforms, though 517 * the basic rules are: 518 * 519 * Controller type Kconfig options needed 520 * --------------- ---------------------- 521 * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN 522 * 523 * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_ 524 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 525 * 526 * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_ 527 * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC} 528 * 529 * (If you have a mixed endian controller, you -must- also define 530 * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building 531 * both your mixed endian and a fully big endian controller support in 532 * the same kernel image). 533 */ 534 535 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC 536 #ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN 537 #define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC) 538 #else 539 #define big_endian_desc(ohci) 1 /* only big endian */ 540 #endif 541 #else 542 #define big_endian_desc(ohci) 0 /* only little endian */ 543 #endif 544 545 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 546 #ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN 547 #define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO) 548 #else 549 #define big_endian_mmio(ohci) 1 /* only big endian */ 550 #endif 551 #else 552 #define big_endian_mmio(ohci) 0 /* only little endian */ 553 #endif 554 555 /* 556 * Big-endian read/write functions are arch-specific. 557 * Other arches can be added if/when they're needed. 558 * 559 */ 560 static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, 561 __hc32 __iomem * regs) 562 { 563 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 564 return big_endian_mmio(ohci) ? 565 readl_be (regs) : 566 readl (regs); 567 #else 568 return readl (regs); 569 #endif 570 } 571 572 static inline void _ohci_writel (const struct ohci_hcd *ohci, 573 const unsigned int val, __hc32 __iomem *regs) 574 { 575 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO 576 big_endian_mmio(ohci) ? 577 writel_be (val, regs) : 578 writel (val, regs); 579 #else 580 writel (val, regs); 581 #endif 582 } 583 584 #define ohci_readl(o,r) _ohci_readl(o,r) 585 #define ohci_writel(o,v,r) _ohci_writel(o,v,r) 586 587 588 /*-------------------------------------------------------------------------*/ 589 590 /* cpu to ohci */ 591 static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x) 592 { 593 return big_endian_desc(ohci) ? 594 (__force __hc16)cpu_to_be16(x) : 595 (__force __hc16)cpu_to_le16(x); 596 } 597 598 static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x) 599 { 600 return big_endian_desc(ohci) ? 601 cpu_to_be16p(x) : 602 cpu_to_le16p(x); 603 } 604 605 static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x) 606 { 607 return big_endian_desc(ohci) ? 608 (__force __hc32)cpu_to_be32(x) : 609 (__force __hc32)cpu_to_le32(x); 610 } 611 612 static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x) 613 { 614 return big_endian_desc(ohci) ? 615 cpu_to_be32p(x) : 616 cpu_to_le32p(x); 617 } 618 619 /* ohci to cpu */ 620 static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x) 621 { 622 return big_endian_desc(ohci) ? 623 be16_to_cpu((__force __be16)x) : 624 le16_to_cpu((__force __le16)x); 625 } 626 627 static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x) 628 { 629 return big_endian_desc(ohci) ? 630 be16_to_cpup((__force __be16 *)x) : 631 le16_to_cpup((__force __le16 *)x); 632 } 633 634 static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x) 635 { 636 return big_endian_desc(ohci) ? 637 be32_to_cpu((__force __be32)x) : 638 le32_to_cpu((__force __le32)x); 639 } 640 641 static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) 642 { 643 return big_endian_desc(ohci) ? 644 be32_to_cpup((__force __be32 *)x) : 645 le32_to_cpup((__force __le32 *)x); 646 } 647 648 /*-------------------------------------------------------------------------*/ 649 650 /* 651 * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all 652 * hardware handles 16 bit reads. Depending on the SoC implementation, the 653 * frame number can wind up in either bits [31:16] (default) or 654 * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts. 655 * 656 * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are 657 * reordered on BE. 658 */ 659 660 static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) 661 { 662 u32 tmp; 663 if (big_endian_desc(ohci)) { 664 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no); 665 if (!(ohci->flags & OHCI_QUIRK_FRAME_NO)) 666 tmp >>= 16; 667 } else 668 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no); 669 670 return (u16)tmp; 671 } 672 673 static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci, 674 const struct td *td, int index) 675 { 676 return (__hc16 *)(big_endian_desc(ohci) ? 677 &td->hwPSW[index ^ 1] : &td->hwPSW[index]); 678 } 679 680 static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci, 681 const struct td *td, int index) 682 { 683 return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index)); 684 } 685 686 /*-------------------------------------------------------------------------*/ 687 688 #define FI 0x2edf /* 12000 bits per frame (-1) */ 689 #define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) 690 #define FIT (1 << 31) 691 #define LSTHRESH 0x628 /* lowspeed bit threshold */ 692 693 static inline void periodic_reinit (struct ohci_hcd *ohci) 694 { 695 u32 fi = ohci->fminterval & 0x03fff; 696 u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT; 697 698 ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval, 699 &ohci->regs->fminterval); 700 ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff, 701 &ohci->regs->periodicstart); 702 } 703 704 /* AMD-756 (D2 rev) reports corrupt register contents in some cases. 705 * The erratum (#4) description is incorrect. AMD's workaround waits 706 * till some bits (mostly reserved) are clear; ok for all revs. 707 */ 708 #define read_roothub(hc, register, mask) ({ \ 709 u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \ 710 if (temp == -1) \ 711 hc->rh_state = OHCI_RH_HALTED; \ 712 else if (hc->flags & OHCI_QUIRK_AMD756) \ 713 while (temp & mask) \ 714 temp = ohci_readl (hc, &hc->regs->roothub.register); \ 715 temp; }) 716 717 static inline u32 roothub_a (struct ohci_hcd *hc) 718 { return read_roothub (hc, a, 0xfc0fe000); } 719 static inline u32 roothub_b (struct ohci_hcd *hc) 720 { return ohci_readl (hc, &hc->regs->roothub.b); } 721 static inline u32 roothub_status (struct ohci_hcd *hc) 722 { return ohci_readl (hc, &hc->regs->roothub.status); } 723 static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i) 724 { return read_roothub (hc, portstatus [i], 0xffe0fce0); } 725 726 /* Declarations of things exported for use by ohci platform drivers */ 727 728 struct ohci_driver_overrides { 729 const char *product_desc; 730 size_t extra_priv_size; 731 int (*reset)(struct usb_hcd *hcd); 732 }; 733 734 extern void ohci_init_driver(struct hc_driver *drv, 735 const struct ohci_driver_overrides *over); 736 extern int ohci_restart(struct ohci_hcd *ohci); 737 extern int ohci_setup(struct usb_hcd *hcd); 738 #ifdef CONFIG_PM 739 extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup); 740 extern int ohci_resume(struct usb_hcd *hcd, bool hibernated); 741 #endif 742 extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 743 u16 wIndex, char *buf, u16 wLength); 744 extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf); 745