xref: /linux/drivers/usb/host/ohci-sm501.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2005 David Brownell
6  * (C) Copyright 2002 Hewlett-Packard Company
7  * (C) Copyright 2008 Magnus Damm
8  *
9  * SM501 Bus Glue - based on ohci-omap.c
10  *
11  * This file is licenced under the GPL.
12  */
13 
14 #include <linux/interrupt.h>
15 #include <linux/jiffies.h>
16 #include <linux/platform_device.h>
17 #include <linux/dma-mapping.h>
18 #include <linux/sm501.h>
19 #include <linux/sm501-regs.h>
20 
21 static int ohci_sm501_init(struct usb_hcd *hcd)
22 {
23 	return ohci_init(hcd_to_ohci(hcd));
24 }
25 
26 static int ohci_sm501_start(struct usb_hcd *hcd)
27 {
28 	struct device *dev = hcd->self.controller;
29 	int ret;
30 
31 	ret = ohci_run(hcd_to_ohci(hcd));
32 	if (ret < 0) {
33 		dev_err(dev, "can't start %s", hcd->self.bus_name);
34 		ohci_stop(hcd);
35 	}
36 
37 	return ret;
38 }
39 
40 /*-------------------------------------------------------------------------*/
41 
42 static const struct hc_driver ohci_sm501_hc_driver = {
43 	.description =		hcd_name,
44 	.product_desc =		"SM501 OHCI",
45 	.hcd_priv_size =	sizeof(struct ohci_hcd),
46 
47 	/*
48 	 * generic hardware linkage
49 	 */
50 	.irq =			ohci_irq,
51 	.flags =		HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM,
52 
53 	/*
54 	 * basic lifecycle operations
55 	 */
56 	.reset =		ohci_sm501_init,
57 	.start =		ohci_sm501_start,
58 	.stop =			ohci_stop,
59 	.shutdown =		ohci_shutdown,
60 
61 	/*
62 	 * managing i/o requests and associated device resources
63 	 */
64 	.urb_enqueue =		ohci_urb_enqueue,
65 	.urb_dequeue =		ohci_urb_dequeue,
66 	.endpoint_disable =	ohci_endpoint_disable,
67 
68 	/*
69 	 * scheduling support
70 	 */
71 	.get_frame_number =	ohci_get_frame,
72 
73 	/*
74 	 * root hub support
75 	 */
76 	.hub_status_data =	ohci_hub_status_data,
77 	.hub_control =		ohci_hub_control,
78 #ifdef	CONFIG_PM
79 	.bus_suspend =		ohci_bus_suspend,
80 	.bus_resume =		ohci_bus_resume,
81 #endif
82 	.start_port_reset =	ohci_start_port_reset,
83 };
84 
85 /*-------------------------------------------------------------------------*/
86 
87 static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
88 {
89 	const struct hc_driver *driver = &ohci_sm501_hc_driver;
90 	struct device *dev = &pdev->dev;
91 	struct resource	*res, *mem;
92 	int retval, irq;
93 	struct usb_hcd *hcd = NULL;
94 
95 	irq = retval = platform_get_irq(pdev, 0);
96 	if (retval < 0)
97 		goto err0;
98 
99 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
100 	if (mem == NULL) {
101 		dev_err(dev, "no resource definition for memory\n");
102 		retval = -ENOENT;
103 		goto err0;
104 	}
105 
106 	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
107 		dev_err(dev, "request_mem_region failed\n");
108 		retval = -EBUSY;
109 		goto err0;
110 	}
111 
112 	/* The sm501 chip is equipped with local memory that may be used
113 	 * by on-chip devices such as the video controller and the usb host.
114 	 * This driver uses dma_declare_coherent_memory() to make sure
115 	 * usb allocations with dma_alloc_coherent() allocate from
116 	 * this local memory. The dma_handle returned by dma_alloc_coherent()
117 	 * will be an offset starting from 0 for the first local memory byte.
118 	 *
119 	 * So as long as data is allocated using dma_alloc_coherent() all is
120 	 * fine. This is however not always the case - buffers may be allocated
121 	 * using kmalloc() - so the usb core needs to be told that it must copy
122 	 * data into our local memory if the buffers happen to be placed in
123 	 * regular memory. The HCD_LOCAL_MEM flag does just that.
124 	 */
125 
126 	if (!dma_declare_coherent_memory(dev, mem->start,
127 					 mem->start - mem->parent->start,
128 					 resource_size(mem),
129 					 DMA_MEMORY_MAP |
130 					 DMA_MEMORY_EXCLUSIVE)) {
131 		dev_err(dev, "cannot declare coherent memory\n");
132 		retval = -ENXIO;
133 		goto err1;
134 	}
135 
136 	/* allocate, reserve and remap resources for registers */
137 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
138 	if (res == NULL) {
139 		dev_err(dev, "no resource definition for registers\n");
140 		retval = -ENOENT;
141 		goto err2;
142 	}
143 
144 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
145 	if (!hcd) {
146 		retval = -ENOMEM;
147 		goto err2;
148 	}
149 
150 	hcd->rsrc_start = res->start;
151 	hcd->rsrc_len = resource_size(res);
152 
153 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,	pdev->name)) {
154 		dev_err(dev, "request_mem_region failed\n");
155 		retval = -EBUSY;
156 		goto err3;
157 	}
158 
159 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
160 	if (hcd->regs == NULL) {
161 		dev_err(dev, "cannot remap registers\n");
162 		retval = -ENXIO;
163 		goto err4;
164 	}
165 
166 	ohci_hcd_init(hcd_to_ohci(hcd));
167 
168 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
169 	if (retval)
170 		goto err5;
171 	device_wakeup_enable(hcd->self.controller);
172 
173 	/* enable power and unmask interrupts */
174 
175 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
176 	sm501_modify_reg(dev->parent, SM501_IRQ_MASK, 1 << 6, 0);
177 
178 	return 0;
179 err5:
180 	iounmap(hcd->regs);
181 err4:
182 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
183 err3:
184 	usb_put_hcd(hcd);
185 err2:
186 	dma_release_declared_memory(dev);
187 err1:
188 	release_mem_region(mem->start, resource_size(mem));
189 err0:
190 	return retval;
191 }
192 
193 static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev)
194 {
195 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
196 	struct resource	*mem;
197 
198 	usb_remove_hcd(hcd);
199 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
200 	usb_put_hcd(hcd);
201 	dma_release_declared_memory(&pdev->dev);
202 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
203 	if (mem)
204 		release_mem_region(mem->start, resource_size(mem));
205 
206 	/* mask interrupts and disable power */
207 
208 	sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6);
209 	sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0);
210 
211 	return 0;
212 }
213 
214 /*-------------------------------------------------------------------------*/
215 
216 #ifdef CONFIG_PM
217 static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
218 {
219 	struct device *dev = &pdev->dev;
220 	struct usb_hcd  *hcd = platform_get_drvdata(pdev);
221 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
222 	bool do_wakeup = device_may_wakeup(dev);
223 	int ret;
224 
225 	if (time_before(jiffies, ohci->next_statechange))
226 		msleep(5);
227 	ohci->next_statechange = jiffies;
228 
229 	ret = ohci_suspend(hcd, do_wakeup);
230 	if (ret)
231 		return ret;
232 
233 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
234 	return ret;
235 }
236 
237 static int ohci_sm501_resume(struct platform_device *pdev)
238 {
239 	struct device *dev = &pdev->dev;
240 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
241 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
242 
243 	if (time_before(jiffies, ohci->next_statechange))
244 		msleep(5);
245 	ohci->next_statechange = jiffies;
246 
247 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
248 	ohci_resume(hcd, false);
249 	return 0;
250 }
251 #else
252 #define ohci_sm501_suspend NULL
253 #define ohci_sm501_resume NULL
254 #endif
255 
256 /*-------------------------------------------------------------------------*/
257 
258 /*
259  * Driver definition to register with the SM501 bus
260  */
261 static struct platform_driver ohci_hcd_sm501_driver = {
262 	.probe		= ohci_hcd_sm501_drv_probe,
263 	.remove		= ohci_hcd_sm501_drv_remove,
264 	.shutdown	= usb_hcd_platform_shutdown,
265 	.suspend	= ohci_sm501_suspend,
266 	.resume		= ohci_sm501_resume,
267 	.driver		= {
268 		.name	= "sm501-usb",
269 	},
270 };
271 MODULE_ALIAS("platform:sm501-usb");
272