1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 6 * (C) Copyright 2002 Hewlett-Packard Company 7 * 8 * USB Bus Glue for Samsung S3C2410 9 * 10 * Written by Christopher Hoover <ch@hpl.hp.com> 11 * Based on fragments of previous driver by Russell King et al. 12 * 13 * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c 14 * by Ben Dooks, <ben@simtec.co.uk> 15 * Copyright (C) 2004 Simtec Electronics 16 * 17 * Thanks to basprog@mail.ru for updates to newer kernels 18 * 19 * This file is licenced under the GPL. 20 */ 21 22 #include <linux/platform_device.h> 23 #include <linux/clk.h> 24 #include <linux/platform_data/usb-ohci-s3c2410.h> 25 26 #define valid_port(idx) ((idx) == 1 || (idx) == 2) 27 28 /* clock device associated with the hcd */ 29 30 static struct clk *clk; 31 static struct clk *usb_clk; 32 33 /* forward definitions */ 34 35 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); 36 37 /* conversion functions */ 38 39 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd) 40 { 41 return hcd->self.controller->platform_data; 42 } 43 44 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) 45 { 46 struct s3c2410_hcd_info *info = dev->dev.platform_data; 47 48 dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); 49 50 clk_enable(usb_clk); 51 mdelay(2); /* let the bus clock stabilise */ 52 53 clk_enable(clk); 54 55 if (info != NULL) { 56 info->hcd = hcd; 57 info->report_oc = s3c2410_hcd_oc; 58 59 if (info->enable_oc != NULL) 60 (info->enable_oc)(info, 1); 61 } 62 } 63 64 static void s3c2410_stop_hc(struct platform_device *dev) 65 { 66 struct s3c2410_hcd_info *info = dev->dev.platform_data; 67 68 dev_dbg(&dev->dev, "s3c2410_stop_hc:\n"); 69 70 if (info != NULL) { 71 info->report_oc = NULL; 72 info->hcd = NULL; 73 74 if (info->enable_oc != NULL) 75 (info->enable_oc)(info, 0); 76 } 77 78 clk_disable(clk); 79 clk_disable(usb_clk); 80 } 81 82 /* ohci_s3c2410_hub_status_data 83 * 84 * update the status data from the hub with anything that 85 * has been detected by our system 86 */ 87 88 static int 89 ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) 90 { 91 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 92 struct s3c2410_hcd_port *port; 93 int orig; 94 int portno; 95 96 orig = ohci_hub_status_data(hcd, buf); 97 98 if (info == NULL) 99 return orig; 100 101 port = &info->port[0]; 102 103 /* mark any changed port as changed */ 104 105 for (portno = 0; portno < 2; port++, portno++) { 106 if (port->oc_changed == 1 && 107 port->flags & S3C_HCDFLG_USED) { 108 dev_dbg(hcd->self.controller, 109 "oc change on port %d\n", portno); 110 111 if (orig < 1) 112 orig = 1; 113 114 buf[0] |= 1<<(portno+1); 115 } 116 } 117 118 return orig; 119 } 120 121 /* s3c2410_usb_set_power 122 * 123 * configure the power on a port, by calling the platform device 124 * routine registered with the platform device 125 */ 126 127 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info, 128 int port, int to) 129 { 130 if (info == NULL) 131 return; 132 133 if (info->power_control != NULL) { 134 info->port[port-1].power = to; 135 (info->power_control)(port-1, to); 136 } 137 } 138 139 /* ohci_s3c2410_hub_control 140 * 141 * look at control requests to the hub, and see if we need 142 * to take any action or over-ride the results from the 143 * request. 144 */ 145 146 static int ohci_s3c2410_hub_control( 147 struct usb_hcd *hcd, 148 u16 typeReq, 149 u16 wValue, 150 u16 wIndex, 151 char *buf, 152 u16 wLength) 153 { 154 struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); 155 struct usb_hub_descriptor *desc; 156 int ret = -EINVAL; 157 u32 *data = (u32 *)buf; 158 159 dev_dbg(hcd->self.controller, 160 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", 161 hcd, typeReq, wValue, wIndex, buf, wLength); 162 163 /* if we are only an humble host without any special capabilities 164 * process the request straight away and exit */ 165 166 if (info == NULL) { 167 ret = ohci_hub_control(hcd, typeReq, wValue, 168 wIndex, buf, wLength); 169 goto out; 170 } 171 172 /* check the request to see if it needs handling */ 173 174 switch (typeReq) { 175 case SetPortFeature: 176 if (wValue == USB_PORT_FEAT_POWER) { 177 dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); 178 s3c2410_usb_set_power(info, wIndex, 1); 179 goto out; 180 } 181 break; 182 183 case ClearPortFeature: 184 switch (wValue) { 185 case USB_PORT_FEAT_C_OVER_CURRENT: 186 dev_dbg(hcd->self.controller, 187 "ClearPortFeature: C_OVER_CURRENT\n"); 188 189 if (valid_port(wIndex)) { 190 info->port[wIndex-1].oc_changed = 0; 191 info->port[wIndex-1].oc_status = 0; 192 } 193 194 goto out; 195 196 case USB_PORT_FEAT_OVER_CURRENT: 197 dev_dbg(hcd->self.controller, 198 "ClearPortFeature: OVER_CURRENT\n"); 199 200 if (valid_port(wIndex)) 201 info->port[wIndex-1].oc_status = 0; 202 203 goto out; 204 205 case USB_PORT_FEAT_POWER: 206 dev_dbg(hcd->self.controller, 207 "ClearPortFeature: POWER\n"); 208 209 if (valid_port(wIndex)) { 210 s3c2410_usb_set_power(info, wIndex, 0); 211 return 0; 212 } 213 } 214 break; 215 } 216 217 ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); 218 if (ret) 219 goto out; 220 221 switch (typeReq) { 222 case GetHubDescriptor: 223 224 /* update the hub's descriptor */ 225 226 desc = (struct usb_hub_descriptor *)buf; 227 228 if (info->power_control == NULL) 229 return ret; 230 231 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", 232 desc->wHubCharacteristics); 233 234 /* remove the old configurations for power-switching, and 235 * over-current protection, and insert our new configuration 236 */ 237 238 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); 239 desc->wHubCharacteristics |= cpu_to_le16(0x0001); 240 241 if (info->enable_oc) { 242 desc->wHubCharacteristics &= ~cpu_to_le16( 243 HUB_CHAR_OCPM); 244 desc->wHubCharacteristics |= cpu_to_le16( 245 0x0008 | 246 0x0001); 247 } 248 249 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", 250 desc->wHubCharacteristics); 251 252 return ret; 253 254 case GetPortStatus: 255 /* check port status */ 256 257 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); 258 259 if (valid_port(wIndex)) { 260 if (info->port[wIndex-1].oc_changed) 261 *data |= cpu_to_le32(RH_PS_OCIC); 262 263 if (info->port[wIndex-1].oc_status) 264 *data |= cpu_to_le32(RH_PS_POCI); 265 } 266 } 267 268 out: 269 return ret; 270 } 271 272 /* s3c2410_hcd_oc 273 * 274 * handle an over-current report 275 */ 276 277 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) 278 { 279 struct s3c2410_hcd_port *port; 280 struct usb_hcd *hcd; 281 unsigned long flags; 282 int portno; 283 284 if (info == NULL) 285 return; 286 287 port = &info->port[0]; 288 hcd = info->hcd; 289 290 local_irq_save(flags); 291 292 for (portno = 0; portno < 2; port++, portno++) { 293 if (port_oc & (1<<portno) && 294 port->flags & S3C_HCDFLG_USED) { 295 port->oc_status = 1; 296 port->oc_changed = 1; 297 298 /* ok, once over-current is detected, 299 the port needs to be powered down */ 300 s3c2410_usb_set_power(info, portno+1, 0); 301 } 302 } 303 304 local_irq_restore(flags); 305 } 306 307 /* may be called without controller electrically present */ 308 /* may be called with controller, bus, and devices active */ 309 310 /* 311 * usb_hcd_s3c2410_remove - shutdown processing for HCD 312 * @dev: USB Host Controller being removed 313 * Context: !in_interrupt() 314 * 315 * Reverses the effect of usb_hcd_3c2410_probe(), first invoking 316 * the HCD's stop() method. It is always called from a thread 317 * context, normally "rmmod", "apmd", or something similar. 318 * 319 */ 320 321 static void 322 usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev) 323 { 324 usb_remove_hcd(hcd); 325 s3c2410_stop_hc(dev); 326 usb_put_hcd(hcd); 327 } 328 329 /** 330 * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs 331 * Context: !in_interrupt() 332 * 333 * Allocates basic resources for this USB host controller, and 334 * then invokes the start() method for the HCD associated with it 335 * through the hotplug entry's driver_data. 336 * 337 */ 338 static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, 339 struct platform_device *dev) 340 { 341 struct usb_hcd *hcd = NULL; 342 int retval; 343 344 s3c2410_usb_set_power(dev->dev.platform_data, 1, 1); 345 s3c2410_usb_set_power(dev->dev.platform_data, 2, 1); 346 347 hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx"); 348 if (hcd == NULL) 349 return -ENOMEM; 350 351 hcd->rsrc_start = dev->resource[0].start; 352 hcd->rsrc_len = resource_size(&dev->resource[0]); 353 354 hcd->regs = devm_request_and_ioremap(&dev->dev, &dev->resource[0]); 355 if (!hcd->regs) { 356 dev_err(&dev->dev, "devm_request_and_ioremap failed\n"); 357 retval = -ENOMEM; 358 goto err_put; 359 } 360 361 clk = devm_clk_get(&dev->dev, "usb-host"); 362 if (IS_ERR(clk)) { 363 dev_err(&dev->dev, "cannot get usb-host clock\n"); 364 retval = PTR_ERR(clk); 365 goto err_put; 366 } 367 368 usb_clk = devm_clk_get(&dev->dev, "usb-bus-host"); 369 if (IS_ERR(usb_clk)) { 370 dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); 371 retval = PTR_ERR(usb_clk); 372 goto err_put; 373 } 374 375 s3c2410_start_hc(dev, hcd); 376 377 ohci_hcd_init(hcd_to_ohci(hcd)); 378 379 retval = usb_add_hcd(hcd, dev->resource[1].start, 0); 380 if (retval != 0) 381 goto err_ioremap; 382 383 return 0; 384 385 err_ioremap: 386 s3c2410_stop_hc(dev); 387 388 err_put: 389 usb_put_hcd(hcd); 390 return retval; 391 } 392 393 /*-------------------------------------------------------------------------*/ 394 395 static int 396 ohci_s3c2410_start(struct usb_hcd *hcd) 397 { 398 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 399 int ret; 400 401 ret = ohci_init(ohci); 402 if (ret < 0) 403 return ret; 404 405 ret = ohci_run(ohci); 406 if (ret < 0) { 407 dev_err(hcd->self.controller, "can't start %s\n", 408 hcd->self.bus_name); 409 ohci_stop(hcd); 410 return ret; 411 } 412 413 return 0; 414 } 415 416 417 static const struct hc_driver ohci_s3c2410_hc_driver = { 418 .description = hcd_name, 419 .product_desc = "S3C24XX OHCI", 420 .hcd_priv_size = sizeof(struct ohci_hcd), 421 422 /* 423 * generic hardware linkage 424 */ 425 .irq = ohci_irq, 426 .flags = HCD_USB11 | HCD_MEMORY, 427 428 /* 429 * basic lifecycle operations 430 */ 431 .start = ohci_s3c2410_start, 432 .stop = ohci_stop, 433 .shutdown = ohci_shutdown, 434 435 /* 436 * managing i/o requests and associated device resources 437 */ 438 .urb_enqueue = ohci_urb_enqueue, 439 .urb_dequeue = ohci_urb_dequeue, 440 .endpoint_disable = ohci_endpoint_disable, 441 442 /* 443 * scheduling support 444 */ 445 .get_frame_number = ohci_get_frame, 446 447 /* 448 * root hub support 449 */ 450 .hub_status_data = ohci_s3c2410_hub_status_data, 451 .hub_control = ohci_s3c2410_hub_control, 452 #ifdef CONFIG_PM 453 .bus_suspend = ohci_bus_suspend, 454 .bus_resume = ohci_bus_resume, 455 #endif 456 .start_port_reset = ohci_start_port_reset, 457 }; 458 459 /* device driver */ 460 461 static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) 462 { 463 return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev); 464 } 465 466 static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) 467 { 468 struct usb_hcd *hcd = platform_get_drvdata(pdev); 469 470 usb_hcd_s3c2410_remove(hcd, pdev); 471 return 0; 472 } 473 474 #ifdef CONFIG_PM 475 static int ohci_hcd_s3c2410_drv_suspend(struct device *dev) 476 { 477 struct usb_hcd *hcd = dev_get_drvdata(dev); 478 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 479 struct platform_device *pdev = to_platform_device(dev); 480 unsigned long flags; 481 int rc = 0; 482 483 /* 484 * Root hub was already suspended. Disable irq emission and 485 * mark HW unaccessible, bail out if RH has been resumed. Use 486 * the spinlock to properly synchronize with possible pending 487 * RH suspend or resume activity. 488 */ 489 spin_lock_irqsave(&ohci->lock, flags); 490 if (ohci->rh_state != OHCI_RH_SUSPENDED) { 491 rc = -EINVAL; 492 goto bail; 493 } 494 495 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 496 497 s3c2410_stop_hc(pdev); 498 bail: 499 spin_unlock_irqrestore(&ohci->lock, flags); 500 501 return rc; 502 } 503 504 static int ohci_hcd_s3c2410_drv_resume(struct device *dev) 505 { 506 struct usb_hcd *hcd = dev_get_drvdata(dev); 507 struct platform_device *pdev = to_platform_device(dev); 508 509 s3c2410_start_hc(pdev, hcd); 510 511 ohci_resume(hcd, false); 512 513 return 0; 514 } 515 #else 516 #define ohci_hcd_s3c2410_drv_suspend NULL 517 #define ohci_hcd_s3c2410_drv_resume NULL 518 #endif 519 520 static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = { 521 .suspend = ohci_hcd_s3c2410_drv_suspend, 522 .resume = ohci_hcd_s3c2410_drv_resume, 523 }; 524 525 static struct platform_driver ohci_hcd_s3c2410_driver = { 526 .probe = ohci_hcd_s3c2410_drv_probe, 527 .remove = ohci_hcd_s3c2410_drv_remove, 528 .shutdown = usb_hcd_platform_shutdown, 529 .driver = { 530 .owner = THIS_MODULE, 531 .name = "s3c2410-ohci", 532 .pm = &ohci_hcd_s3c2410_pm_ops, 533 }, 534 }; 535 536 MODULE_ALIAS("platform:s3c2410-ohci"); 537