1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * Copyright (C) 2004 SAN People (Pty) Ltd. 5 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> 6 * 7 * AT91RM9200 Bus Glue 8 * 9 * Based on fragments of 2.4 driver by Rick Bronson. 10 * Based on ohci-omap.c 11 * 12 * This file is licenced under the GPL. 13 */ 14 15 #include <linux/clk.h> 16 #include <linux/platform_device.h> 17 18 #include <asm/mach-types.h> 19 #include <asm/hardware.h> 20 #include <asm/arch/board.h> 21 22 #ifndef CONFIG_ARCH_AT91RM9200 23 #error "CONFIG_ARCH_AT91RM9200 must be defined." 24 #endif 25 26 /* interface and function clocks */ 27 static struct clk *iclk, *fclk; 28 29 extern int usb_disabled(void); 30 31 /*-------------------------------------------------------------------------*/ 32 33 static void at91_start_hc(struct platform_device *pdev) 34 { 35 struct usb_hcd *hcd = platform_get_drvdata(pdev); 36 struct ohci_regs __iomem *regs = hcd->regs; 37 38 dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n"); 39 40 /* 41 * Start the USB clocks. 42 */ 43 clk_enable(iclk); 44 clk_enable(fclk); 45 46 /* 47 * The USB host controller must remain in reset. 48 */ 49 writel(0, ®s->control); 50 } 51 52 static void at91_stop_hc(struct platform_device *pdev) 53 { 54 struct usb_hcd *hcd = platform_get_drvdata(pdev); 55 struct ohci_regs __iomem *regs = hcd->regs; 56 57 dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n"); 58 59 /* 60 * Put the USB host controller into reset. 61 */ 62 writel(0, ®s->control); 63 64 /* 65 * Stop the USB clocks. 66 */ 67 clk_disable(fclk); 68 clk_disable(iclk); 69 } 70 71 72 /*-------------------------------------------------------------------------*/ 73 74 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); 75 76 /* configure so an HC device and id are always provided */ 77 /* always called with process context; sleeping is OK */ 78 79 80 /** 81 * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs 82 * Context: !in_interrupt() 83 * 84 * Allocates basic resources for this USB host controller, and 85 * then invokes the start() method for the HCD associated with it 86 * through the hotplug entry's driver_data. 87 */ 88 int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev) 89 { 90 int retval; 91 struct usb_hcd *hcd = NULL; 92 93 if (pdev->num_resources != 2) { 94 pr_debug("hcd probe: invalid num_resources"); 95 return -ENODEV; 96 } 97 98 if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) { 99 pr_debug("hcd probe: invalid resource type\n"); 100 return -ENODEV; 101 } 102 103 hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200"); 104 if (!hcd) 105 return -ENOMEM; 106 hcd->rsrc_start = pdev->resource[0].start; 107 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; 108 109 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { 110 pr_debug("request_mem_region failed\n"); 111 retval = -EBUSY; 112 goto err1; 113 } 114 115 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 116 if (!hcd->regs) { 117 pr_debug("ioremap failed\n"); 118 retval = -EIO; 119 goto err2; 120 } 121 122 iclk = clk_get(&pdev->dev, "ohci_clk"); 123 fclk = clk_get(&pdev->dev, "uhpck"); 124 125 at91_start_hc(pdev); 126 ohci_hcd_init(hcd_to_ohci(hcd)); 127 128 retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT); 129 if (retval == 0) 130 return retval; 131 132 /* Error handling */ 133 at91_stop_hc(pdev); 134 135 clk_put(fclk); 136 clk_put(iclk); 137 138 iounmap(hcd->regs); 139 140 err2: 141 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 142 143 err1: 144 usb_put_hcd(hcd); 145 return retval; 146 } 147 148 149 /* may be called with controller, bus, and devices active */ 150 151 /** 152 * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs 153 * @dev: USB Host Controller being removed 154 * Context: !in_interrupt() 155 * 156 * Reverses the effect of usb_hcd_at91_probe(), first invoking 157 * the HCD's stop() method. It is always called from a thread 158 * context, normally "rmmod", "apmd", or something similar. 159 * 160 */ 161 static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev) 162 { 163 usb_remove_hcd(hcd); 164 at91_stop_hc(pdev); 165 iounmap(hcd->regs); 166 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 167 168 clk_put(fclk); 169 clk_put(iclk); 170 fclk = iclk = NULL; 171 172 dev_set_drvdata(&pdev->dev, NULL); 173 return 0; 174 } 175 176 /*-------------------------------------------------------------------------*/ 177 178 static int __devinit 179 ohci_at91_start (struct usb_hcd *hcd) 180 { 181 // struct at91_ohci_data *board = hcd->self.controller->platform_data; 182 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 183 int ret; 184 185 if ((ret = ohci_init(ohci)) < 0) 186 return ret; 187 188 if ((ret = ohci_run(ohci)) < 0) { 189 err("can't start %s", hcd->self.bus_name); 190 ohci_stop(hcd); 191 return ret; 192 } 193 // hcd->self.root_hub->maxchild = board->ports; 194 return 0; 195 } 196 197 /*-------------------------------------------------------------------------*/ 198 199 static const struct hc_driver ohci_at91_hc_driver = { 200 .description = hcd_name, 201 .product_desc = "AT91RM9200 OHCI", 202 .hcd_priv_size = sizeof(struct ohci_hcd), 203 204 /* 205 * generic hardware linkage 206 */ 207 .irq = ohci_irq, 208 .flags = HCD_USB11 | HCD_MEMORY, 209 210 /* 211 * basic lifecycle operations 212 */ 213 .start = ohci_at91_start, 214 .stop = ohci_stop, 215 216 /* 217 * managing i/o requests and associated device resources 218 */ 219 .urb_enqueue = ohci_urb_enqueue, 220 .urb_dequeue = ohci_urb_dequeue, 221 .endpoint_disable = ohci_endpoint_disable, 222 223 /* 224 * scheduling support 225 */ 226 .get_frame_number = ohci_get_frame, 227 228 /* 229 * root hub support 230 */ 231 .hub_status_data = ohci_hub_status_data, 232 .hub_control = ohci_hub_control, 233 234 #ifdef CONFIG_PM 235 .bus_suspend = ohci_bus_suspend, 236 .bus_resume = ohci_bus_resume, 237 #endif 238 .start_port_reset = ohci_start_port_reset, 239 }; 240 241 /*-------------------------------------------------------------------------*/ 242 243 static int ohci_hcd_at91_drv_probe(struct platform_device *dev) 244 { 245 return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev); 246 } 247 248 static int ohci_hcd_at91_drv_remove(struct platform_device *dev) 249 { 250 return usb_hcd_at91_remove(platform_get_drvdata(dev), dev); 251 } 252 253 #ifdef CONFIG_PM 254 255 /* REVISIT suspend/resume look "too" simple here */ 256 257 static int 258 ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg) 259 { 260 clk_disable(fclk); 261 clk_disable(iclk); 262 263 return 0; 264 } 265 266 static int ohci_hcd_at91_drv_resume(struct platform_device *dev) 267 { 268 clk_enable(iclk); 269 clk_enable(fclk); 270 271 return 0; 272 } 273 #else 274 #define ohci_hcd_at91_drv_suspend NULL 275 #define ohci_hcd_at91_drv_resume NULL 276 #endif 277 278 MODULE_ALIAS("at91rm9200-ohci"); 279 280 static struct platform_driver ohci_hcd_at91_driver = { 281 .probe = ohci_hcd_at91_drv_probe, 282 .remove = ohci_hcd_at91_drv_remove, 283 .suspend = ohci_hcd_at91_drv_suspend, 284 .resume = ohci_hcd_at91_drv_resume, 285 .driver = { 286 .name = "at91rm9200-ohci", 287 .owner = THIS_MODULE, 288 }, 289 }; 290 291 static int __init ohci_hcd_at91_init (void) 292 { 293 if (usb_disabled()) 294 return -ENODEV; 295 296 return platform_driver_register(&ohci_hcd_at91_driver); 297 } 298 299 static void __exit ohci_hcd_at91_cleanup (void) 300 { 301 platform_driver_unregister(&ohci_hcd_at91_driver); 302 } 303 304 module_init (ohci_hcd_at91_init); 305 module_exit (ohci_hcd_at91_cleanup); 306