1 /* 2 * OHCI HCD (Host Controller Driver) for USB. 3 * 4 * Copyright (C) 2004 SAN People (Pty) Ltd. 5 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> 6 * 7 * AT91 Bus Glue 8 * 9 * Based on fragments of 2.4 driver by Rick Bronson. 10 * Based on ohci-omap.c 11 * 12 * This file is licenced under the GPL. 13 */ 14 15 #include <linux/clk.h> 16 #include <linux/platform_device.h> 17 18 #include <asm/mach-types.h> 19 #include <asm/hardware.h> 20 #include <asm/arch/board.h> 21 22 #ifndef CONFIG_ARCH_AT91 23 #error "CONFIG_ARCH_AT91 must be defined." 24 #endif 25 26 /* interface and function clocks */ 27 static struct clk *iclk, *fclk; 28 static int clocked; 29 30 extern int usb_disabled(void); 31 32 /*-------------------------------------------------------------------------*/ 33 34 static void at91_start_hc(struct platform_device *pdev) 35 { 36 struct usb_hcd *hcd = platform_get_drvdata(pdev); 37 struct ohci_regs __iomem *regs = hcd->regs; 38 39 dev_dbg(&pdev->dev, "start\n"); 40 41 /* 42 * Start the USB clocks. 43 */ 44 clk_enable(iclk); 45 clk_enable(fclk); 46 clocked = 1; 47 48 /* 49 * The USB host controller must remain in reset. 50 */ 51 writel(0, ®s->control); 52 } 53 54 static void at91_stop_hc(struct platform_device *pdev) 55 { 56 struct usb_hcd *hcd = platform_get_drvdata(pdev); 57 struct ohci_regs __iomem *regs = hcd->regs; 58 59 dev_dbg(&pdev->dev, "stop\n"); 60 61 /* 62 * Put the USB host controller into reset. 63 */ 64 writel(0, ®s->control); 65 66 /* 67 * Stop the USB clocks. 68 */ 69 clk_disable(fclk); 70 clk_disable(iclk); 71 clocked = 0; 72 } 73 74 75 /*-------------------------------------------------------------------------*/ 76 77 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); 78 79 /* configure so an HC device and id are always provided */ 80 /* always called with process context; sleeping is OK */ 81 82 83 /** 84 * usb_hcd_at91_probe - initialize AT91-based HCDs 85 * Context: !in_interrupt() 86 * 87 * Allocates basic resources for this USB host controller, and 88 * then invokes the start() method for the HCD associated with it 89 * through the hotplug entry's driver_data. 90 */ 91 static int usb_hcd_at91_probe(const struct hc_driver *driver, 92 struct platform_device *pdev) 93 { 94 int retval; 95 struct usb_hcd *hcd = NULL; 96 97 if (pdev->num_resources != 2) { 98 pr_debug("hcd probe: invalid num_resources"); 99 return -ENODEV; 100 } 101 102 if ((pdev->resource[0].flags != IORESOURCE_MEM) 103 || (pdev->resource[1].flags != IORESOURCE_IRQ)) { 104 pr_debug("hcd probe: invalid resource type\n"); 105 return -ENODEV; 106 } 107 108 hcd = usb_create_hcd(driver, &pdev->dev, "at91"); 109 if (!hcd) 110 return -ENOMEM; 111 hcd->rsrc_start = pdev->resource[0].start; 112 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; 113 114 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { 115 pr_debug("request_mem_region failed\n"); 116 retval = -EBUSY; 117 goto err1; 118 } 119 120 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 121 if (!hcd->regs) { 122 pr_debug("ioremap failed\n"); 123 retval = -EIO; 124 goto err2; 125 } 126 127 iclk = clk_get(&pdev->dev, "ohci_clk"); 128 fclk = clk_get(&pdev->dev, "uhpck"); 129 130 at91_start_hc(pdev); 131 ohci_hcd_init(hcd_to_ohci(hcd)); 132 133 retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED); 134 if (retval == 0) 135 return retval; 136 137 /* Error handling */ 138 at91_stop_hc(pdev); 139 140 clk_put(fclk); 141 clk_put(iclk); 142 143 iounmap(hcd->regs); 144 145 err2: 146 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 147 148 err1: 149 usb_put_hcd(hcd); 150 return retval; 151 } 152 153 154 /* may be called with controller, bus, and devices active */ 155 156 /** 157 * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs 158 * @dev: USB Host Controller being removed 159 * Context: !in_interrupt() 160 * 161 * Reverses the effect of usb_hcd_at91_probe(), first invoking 162 * the HCD's stop() method. It is always called from a thread 163 * context, "rmmod" or something similar. 164 * 165 */ 166 static int usb_hcd_at91_remove(struct usb_hcd *hcd, 167 struct platform_device *pdev) 168 { 169 usb_remove_hcd(hcd); 170 at91_stop_hc(pdev); 171 iounmap(hcd->regs); 172 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 173 174 clk_put(fclk); 175 clk_put(iclk); 176 fclk = iclk = NULL; 177 178 dev_set_drvdata(&pdev->dev, NULL); 179 return 0; 180 } 181 182 /*-------------------------------------------------------------------------*/ 183 184 static int __devinit 185 ohci_at91_start (struct usb_hcd *hcd) 186 { 187 struct at91_usbh_data *board = hcd->self.controller->platform_data; 188 struct ohci_hcd *ohci = hcd_to_ohci (hcd); 189 int ret; 190 191 if ((ret = ohci_init(ohci)) < 0) 192 return ret; 193 194 ohci->num_ports = board->ports; 195 196 if ((ret = ohci_run(ohci)) < 0) { 197 err("can't start %s", hcd->self.bus_name); 198 ohci_stop(hcd); 199 return ret; 200 } 201 return 0; 202 } 203 204 /*-------------------------------------------------------------------------*/ 205 206 static const struct hc_driver ohci_at91_hc_driver = { 207 .description = hcd_name, 208 .product_desc = "AT91 OHCI", 209 .hcd_priv_size = sizeof(struct ohci_hcd), 210 211 /* 212 * generic hardware linkage 213 */ 214 .irq = ohci_irq, 215 .flags = HCD_USB11 | HCD_MEMORY, 216 217 /* 218 * basic lifecycle operations 219 */ 220 .start = ohci_at91_start, 221 .stop = ohci_stop, 222 .shutdown = ohci_shutdown, 223 224 /* 225 * managing i/o requests and associated device resources 226 */ 227 .urb_enqueue = ohci_urb_enqueue, 228 .urb_dequeue = ohci_urb_dequeue, 229 .endpoint_disable = ohci_endpoint_disable, 230 231 /* 232 * scheduling support 233 */ 234 .get_frame_number = ohci_get_frame, 235 236 /* 237 * root hub support 238 */ 239 .hub_status_data = ohci_hub_status_data, 240 .hub_control = ohci_hub_control, 241 .hub_irq_enable = ohci_rhsc_enable, 242 #ifdef CONFIG_PM 243 .bus_suspend = ohci_bus_suspend, 244 .bus_resume = ohci_bus_resume, 245 #endif 246 .start_port_reset = ohci_start_port_reset, 247 }; 248 249 /*-------------------------------------------------------------------------*/ 250 251 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) 252 { 253 device_init_wakeup(&pdev->dev, 1); 254 return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); 255 } 256 257 static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) 258 { 259 device_init_wakeup(&pdev->dev, 0); 260 return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); 261 } 262 263 #ifdef CONFIG_PM 264 265 static int 266 ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) 267 { 268 struct usb_hcd *hcd = platform_get_drvdata(pdev); 269 struct ohci_hcd *ohci = hcd_to_ohci(hcd); 270 271 if (device_may_wakeup(&pdev->dev)) 272 enable_irq_wake(hcd->irq); 273 274 /* 275 * The integrated transceivers seem unable to notice disconnect, 276 * reconnect, or wakeup without the 48 MHz clock active. so for 277 * correctness, always discard connection state (using reset). 278 * 279 * REVISIT: some boards will be able to turn VBUS off... 280 */ 281 if (at91_suspend_entering_slow_clock()) { 282 ohci_usb_reset (ohci); 283 clk_disable(fclk); 284 clk_disable(iclk); 285 clocked = 0; 286 } 287 288 return 0; 289 } 290 291 static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) 292 { 293 struct usb_hcd *hcd = platform_get_drvdata(pdev); 294 295 if (device_may_wakeup(&pdev->dev)) 296 disable_irq_wake(hcd->irq); 297 298 if (!clocked) { 299 clk_enable(iclk); 300 clk_enable(fclk); 301 clocked = 1; 302 } 303 304 return 0; 305 } 306 #else 307 #define ohci_hcd_at91_drv_suspend NULL 308 #define ohci_hcd_at91_drv_resume NULL 309 #endif 310 311 MODULE_ALIAS("at91_ohci"); 312 313 static struct platform_driver ohci_hcd_at91_driver = { 314 .probe = ohci_hcd_at91_drv_probe, 315 .remove = ohci_hcd_at91_drv_remove, 316 .shutdown = usb_hcd_platform_shutdown, 317 .suspend = ohci_hcd_at91_drv_suspend, 318 .resume = ohci_hcd_at91_drv_resume, 319 .driver = { 320 .name = "at91_ohci", 321 .owner = THIS_MODULE, 322 }, 323 }; 324 325