xref: /linux/drivers/usb/host/ehci.h (revision e190bfe56841551b1ad5abb42ebd0c4798cc8c01)
1 /*
2  * Copyright (c) 2001-2002 by David Brownell
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the
6  * Free Software Foundation; either version 2 of the License, or (at your
7  * option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
12  * for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software Foundation,
16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17  */
18 
19 #ifndef __LINUX_EHCI_HCD_H
20 #define __LINUX_EHCI_HCD_H
21 
22 /* definitions used for the EHCI driver */
23 
24 /*
25  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26  * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27  * the host controller implementation.
28  *
29  * To facilitate the strongest possible byte-order checking from "sparse"
30  * and so on, we use __leXX unless that's not practical.
31  */
32 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33 typedef __u32 __bitwise __hc32;
34 typedef __u16 __bitwise __hc16;
35 #else
36 #define __hc32	__le32
37 #define __hc16	__le16
38 #endif
39 
40 /* statistics can be kept for tuning/monitoring */
41 struct ehci_stats {
42 	/* irq usage */
43 	unsigned long		normal;
44 	unsigned long		error;
45 	unsigned long		reclaim;
46 	unsigned long		lost_iaa;
47 
48 	/* termination of urbs from core */
49 	unsigned long		complete;
50 	unsigned long		unlink;
51 };
52 
53 /* ehci_hcd->lock guards shared data against other CPUs:
54  *   ehci_hcd:	async, reclaim, periodic (and shadow), ...
55  *   usb_host_endpoint: hcpriv
56  *   ehci_qh:	qh_next, qtd_list
57  *   ehci_qtd:	qtd_list
58  *
59  * Also, hold this lock when talking to HC registers or
60  * when updating hw_* fields in shared qh/qtd/... structures.
61  */
62 
63 #define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
64 
65 struct ehci_hcd {			/* one per controller */
66 	/* glue to PCI and HCD framework */
67 	struct ehci_caps __iomem *caps;
68 	struct ehci_regs __iomem *regs;
69 	struct ehci_dbg_port __iomem *debug;
70 
71 	__u32			hcs_params;	/* cached register copy */
72 	spinlock_t		lock;
73 
74 	/* async schedule support */
75 	struct ehci_qh		*async;
76 	struct ehci_qh		*reclaim;
77 	unsigned		scanning : 1;
78 
79 	/* periodic schedule support */
80 #define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
81 	unsigned		periodic_size;
82 	__hc32			*periodic;	/* hw periodic table */
83 	dma_addr_t		periodic_dma;
84 	unsigned		i_thresh;	/* uframes HC might cache */
85 
86 	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
87 	int			next_uframe;	/* scan periodic, start here */
88 	unsigned		periodic_sched;	/* periodic activity count */
89 
90 	/* list of itds & sitds completed while clock_frame was still active */
91 	struct list_head	cached_itd_list;
92 	struct list_head	cached_sitd_list;
93 	unsigned		clock_frame;
94 
95 	/* per root hub port */
96 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
97 
98 	/* bit vectors (one bit per port) */
99 	unsigned long		bus_suspended;		/* which ports were
100 			already suspended at the start of a bus suspend */
101 	unsigned long		companion_ports;	/* which ports are
102 			dedicated to the companion controller */
103 	unsigned long		owned_ports;		/* which ports are
104 			owned by the companion during a bus suspend */
105 	unsigned long		port_c_suspend;		/* which ports have
106 			the change-suspend feature turned on */
107 	unsigned long		suspended_ports;	/* which ports are
108 			suspended */
109 
110 	/* per-HC memory pools (could be per-bus, but ...) */
111 	struct dma_pool		*qh_pool;	/* qh per active urb */
112 	struct dma_pool		*qtd_pool;	/* one or more per qh */
113 	struct dma_pool		*itd_pool;	/* itd per iso urb */
114 	struct dma_pool		*sitd_pool;	/* sitd per split iso urb */
115 
116 	struct timer_list	iaa_watchdog;
117 	struct timer_list	watchdog;
118 	unsigned long		actions;
119 	unsigned		stamp;
120 	unsigned		random_frame;
121 	unsigned long		next_statechange;
122 	ktime_t			last_periodic_enable;
123 	u32			command;
124 
125 	/* SILICON QUIRKS */
126 	unsigned		no_selective_suspend:1;
127 	unsigned		has_fsl_port_bug:1; /* FreeScale */
128 	unsigned		big_endian_mmio:1;
129 	unsigned		big_endian_desc:1;
130 	unsigned		has_amcc_usb23:1;
131 	unsigned		need_io_watchdog:1;
132 	unsigned		broken_periodic:1;
133 
134 	/* required for usb32 quirk */
135 	#define OHCI_CTRL_HCFS          (3 << 6)
136 	#define OHCI_USB_OPER           (2 << 6)
137 	#define OHCI_USB_SUSPEND        (3 << 6)
138 
139 	#define OHCI_HCCTRL_OFFSET      0x4
140 	#define OHCI_HCCTRL_LEN         0x4
141 	__hc32			*ohci_hcctrl_reg;
142 	unsigned		has_hostpc:1;
143 
144 	u8			sbrn;		/* packed release number */
145 
146 	/* irq statistics */
147 #ifdef EHCI_STATS
148 	struct ehci_stats	stats;
149 #	define COUNT(x) do { (x)++; } while (0)
150 #else
151 #	define COUNT(x) do {} while (0)
152 #endif
153 
154 	/* debug files */
155 #ifdef DEBUG
156 	struct dentry		*debug_dir;
157 	struct dentry		*debug_async;
158 	struct dentry		*debug_periodic;
159 	struct dentry		*debug_registers;
160 #endif
161 };
162 
163 /* convert between an HCD pointer and the corresponding EHCI_HCD */
164 static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
165 {
166 	return (struct ehci_hcd *) (hcd->hcd_priv);
167 }
168 static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
169 {
170 	return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
171 }
172 
173 
174 static inline void
175 iaa_watchdog_start(struct ehci_hcd *ehci)
176 {
177 	WARN_ON(timer_pending(&ehci->iaa_watchdog));
178 	mod_timer(&ehci->iaa_watchdog,
179 			jiffies + msecs_to_jiffies(EHCI_IAA_MSECS));
180 }
181 
182 static inline void iaa_watchdog_done(struct ehci_hcd *ehci)
183 {
184 	del_timer(&ehci->iaa_watchdog);
185 }
186 
187 enum ehci_timer_action {
188 	TIMER_IO_WATCHDOG,
189 	TIMER_ASYNC_SHRINK,
190 	TIMER_ASYNC_OFF,
191 };
192 
193 static inline void
194 timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
195 {
196 	clear_bit (action, &ehci->actions);
197 }
198 
199 static void free_cached_lists(struct ehci_hcd *ehci);
200 
201 /*-------------------------------------------------------------------------*/
202 
203 #include <linux/usb/ehci_def.h>
204 
205 /*-------------------------------------------------------------------------*/
206 
207 #define	QTD_NEXT(ehci, dma)	cpu_to_hc32(ehci, (u32)dma)
208 
209 /*
210  * EHCI Specification 0.95 Section 3.5
211  * QTD: describe data transfer components (buffer, direction, ...)
212  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
213  *
214  * These are associated only with "QH" (Queue Head) structures,
215  * used with control, bulk, and interrupt transfers.
216  */
217 struct ehci_qtd {
218 	/* first part defined by EHCI spec */
219 	__hc32			hw_next;	/* see EHCI 3.5.1 */
220 	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
221 	__hc32			hw_token;       /* see EHCI 3.5.3 */
222 #define	QTD_TOGGLE	(1 << 31)	/* data toggle */
223 #define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
224 #define	QTD_IOC		(1 << 15)	/* interrupt on complete */
225 #define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
226 #define	QTD_PID(tok)	(((tok)>>8) & 0x3)
227 #define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
228 #define	QTD_STS_HALT	(1 << 6)	/* halted on error */
229 #define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
230 #define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
231 #define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
232 #define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
233 #define	QTD_STS_STS	(1 << 1)	/* split transaction state */
234 #define	QTD_STS_PING	(1 << 0)	/* issue PING? */
235 
236 #define ACTIVE_BIT(ehci)	cpu_to_hc32(ehci, QTD_STS_ACTIVE)
237 #define HALT_BIT(ehci)		cpu_to_hc32(ehci, QTD_STS_HALT)
238 #define STATUS_BIT(ehci)	cpu_to_hc32(ehci, QTD_STS_STS)
239 
240 	__hc32			hw_buf [5];        /* see EHCI 3.5.4 */
241 	__hc32			hw_buf_hi [5];        /* Appendix B */
242 
243 	/* the rest is HCD-private */
244 	dma_addr_t		qtd_dma;		/* qtd address */
245 	struct list_head	qtd_list;		/* sw qtd list */
246 	struct urb		*urb;			/* qtd's urb */
247 	size_t			length;			/* length of buffer */
248 } __attribute__ ((aligned (32)));
249 
250 /* mask NakCnt+T in qh->hw_alt_next */
251 #define QTD_MASK(ehci)	cpu_to_hc32 (ehci, ~0x1f)
252 
253 #define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
254 
255 /*-------------------------------------------------------------------------*/
256 
257 /* type tag from {qh,itd,sitd,fstn}->hw_next */
258 #define Q_NEXT_TYPE(ehci,dma)	((dma) & cpu_to_hc32(ehci, 3 << 1))
259 
260 /*
261  * Now the following defines are not converted using the
262  * cpu_to_le32() macro anymore, since we have to support
263  * "dynamic" switching between be and le support, so that the driver
264  * can be used on one system with SoC EHCI controller using big-endian
265  * descriptors as well as a normal little-endian PCI EHCI controller.
266  */
267 /* values for that type tag */
268 #define Q_TYPE_ITD	(0 << 1)
269 #define Q_TYPE_QH	(1 << 1)
270 #define Q_TYPE_SITD	(2 << 1)
271 #define Q_TYPE_FSTN	(3 << 1)
272 
273 /* next async queue entry, or pointer to interrupt/periodic QH */
274 #define QH_NEXT(ehci,dma)	(cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
275 
276 /* for periodic/async schedules and qtd lists, mark end of list */
277 #define EHCI_LIST_END(ehci)	cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
278 
279 /*
280  * Entries in periodic shadow table are pointers to one of four kinds
281  * of data structure.  That's dictated by the hardware; a type tag is
282  * encoded in the low bits of the hardware's periodic schedule.  Use
283  * Q_NEXT_TYPE to get the tag.
284  *
285  * For entries in the async schedule, the type tag always says "qh".
286  */
287 union ehci_shadow {
288 	struct ehci_qh		*qh;		/* Q_TYPE_QH */
289 	struct ehci_itd		*itd;		/* Q_TYPE_ITD */
290 	struct ehci_sitd	*sitd;		/* Q_TYPE_SITD */
291 	struct ehci_fstn	*fstn;		/* Q_TYPE_FSTN */
292 	__hc32			*hw_next;	/* (all types) */
293 	void			*ptr;
294 };
295 
296 /*-------------------------------------------------------------------------*/
297 
298 /*
299  * EHCI Specification 0.95 Section 3.6
300  * QH: describes control/bulk/interrupt endpoints
301  * See Fig 3-7 "Queue Head Structure Layout".
302  *
303  * These appear in both the async and (for interrupt) periodic schedules.
304  */
305 
306 /* first part defined by EHCI spec */
307 struct ehci_qh_hw {
308 	__hc32			hw_next;	/* see EHCI 3.6.1 */
309 	__hc32			hw_info1;       /* see EHCI 3.6.2 */
310 #define	QH_HEAD		0x00008000
311 	__hc32			hw_info2;        /* see EHCI 3.6.2 */
312 #define	QH_SMASK	0x000000ff
313 #define	QH_CMASK	0x0000ff00
314 #define	QH_HUBADDR	0x007f0000
315 #define	QH_HUBPORT	0x3f800000
316 #define	QH_MULT		0xc0000000
317 	__hc32			hw_current;	/* qtd list - see EHCI 3.6.4 */
318 
319 	/* qtd overlay (hardware parts of a struct ehci_qtd) */
320 	__hc32			hw_qtd_next;
321 	__hc32			hw_alt_next;
322 	__hc32			hw_token;
323 	__hc32			hw_buf [5];
324 	__hc32			hw_buf_hi [5];
325 } __attribute__ ((aligned(32)));
326 
327 struct ehci_qh {
328 	struct ehci_qh_hw	*hw;
329 	/* the rest is HCD-private */
330 	dma_addr_t		qh_dma;		/* address of qh */
331 	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
332 	struct list_head	qtd_list;	/* sw qtd list */
333 	struct ehci_qtd		*dummy;
334 	struct ehci_qh		*reclaim;	/* next to reclaim */
335 
336 	struct ehci_hcd		*ehci;
337 
338 	/*
339 	 * Do NOT use atomic operations for QH refcounting. On some CPUs
340 	 * (PPC7448 for example), atomic operations cannot be performed on
341 	 * memory that is cache-inhibited (i.e. being used for DMA).
342 	 * Spinlocks are used to protect all QH fields.
343 	 */
344 	u32			refcount;
345 	unsigned		stamp;
346 
347 	u8			needs_rescan;	/* Dequeue during giveback */
348 	u8			qh_state;
349 #define	QH_STATE_LINKED		1		/* HC sees this */
350 #define	QH_STATE_UNLINK		2		/* HC may still see this */
351 #define	QH_STATE_IDLE		3		/* HC doesn't see this */
352 #define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on reclaim q */
353 #define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
354 
355 	u8			xacterrs;	/* XactErr retry counter */
356 #define	QH_XACTERR_MAX		32		/* XactErr retry limit */
357 
358 	/* periodic schedule info */
359 	u8			usecs;		/* intr bandwidth */
360 	u8			gap_uf;		/* uframes split/csplit gap */
361 	u8			c_usecs;	/* ... split completion bw */
362 	u16			tt_usecs;	/* tt downstream bandwidth */
363 	unsigned short		period;		/* polling interval */
364 	unsigned short		start;		/* where polling starts */
365 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
366 
367 	struct usb_device	*dev;		/* access to TT */
368 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
369 };
370 
371 /*-------------------------------------------------------------------------*/
372 
373 /* description of one iso transaction (up to 3 KB data if highspeed) */
374 struct ehci_iso_packet {
375 	/* These will be copied to iTD when scheduling */
376 	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
377 	__hc32			transaction;	/* itd->hw_transaction[i] |= */
378 	u8			cross;		/* buf crosses pages */
379 	/* for full speed OUT splits */
380 	u32			buf1;
381 };
382 
383 /* temporary schedule data for packets from iso urbs (both speeds)
384  * each packet is one logical usb transaction to the device (not TT),
385  * beginning at stream->next_uframe
386  */
387 struct ehci_iso_sched {
388 	struct list_head	td_list;
389 	unsigned		span;
390 	struct ehci_iso_packet	packet [0];
391 };
392 
393 /*
394  * ehci_iso_stream - groups all (s)itds for this endpoint.
395  * acts like a qh would, if EHCI had them for ISO.
396  */
397 struct ehci_iso_stream {
398 	/* first field matches ehci_hq, but is NULL */
399 	struct ehci_qh_hw	*hw;
400 
401 	u32			refcount;
402 	u8			bEndpointAddress;
403 	u8			highspeed;
404 	u16			depth;		/* depth in uframes */
405 	struct list_head	td_list;	/* queued itds/sitds */
406 	struct list_head	free_list;	/* list of unused itds/sitds */
407 	struct usb_device	*udev;
408 	struct usb_host_endpoint *ep;
409 
410 	/* output of (re)scheduling */
411 	unsigned long		start;		/* jiffies */
412 	unsigned long		rescheduled;
413 	int			next_uframe;
414 	__hc32			splits;
415 
416 	/* the rest is derived from the endpoint descriptor,
417 	 * trusting urb->interval == f(epdesc->bInterval) and
418 	 * including the extra info for hw_bufp[0..2]
419 	 */
420 	u8			usecs, c_usecs;
421 	u16			interval;
422 	u16			tt_usecs;
423 	u16			maxp;
424 	u16			raw_mask;
425 	unsigned		bandwidth;
426 
427 	/* This is used to initialize iTD's hw_bufp fields */
428 	__hc32			buf0;
429 	__hc32			buf1;
430 	__hc32			buf2;
431 
432 	/* this is used to initialize sITD's tt info */
433 	__hc32			address;
434 };
435 
436 /*-------------------------------------------------------------------------*/
437 
438 /*
439  * EHCI Specification 0.95 Section 3.3
440  * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
441  *
442  * Schedule records for high speed iso xfers
443  */
444 struct ehci_itd {
445 	/* first part defined by EHCI spec */
446 	__hc32			hw_next;           /* see EHCI 3.3.1 */
447 	__hc32			hw_transaction [8]; /* see EHCI 3.3.2 */
448 #define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
449 #define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
450 #define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
451 #define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
452 #define	EHCI_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
453 #define	EHCI_ITD_IOC		(1 << 15)	/* interrupt on complete */
454 
455 #define ITD_ACTIVE(ehci)	cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
456 
457 	__hc32			hw_bufp [7];	/* see EHCI 3.3.3 */
458 	__hc32			hw_bufp_hi [7];	/* Appendix B */
459 
460 	/* the rest is HCD-private */
461 	dma_addr_t		itd_dma;	/* for this itd */
462 	union ehci_shadow	itd_next;	/* ptr to periodic q entry */
463 
464 	struct urb		*urb;
465 	struct ehci_iso_stream	*stream;	/* endpoint's queue */
466 	struct list_head	itd_list;	/* list of stream's itds */
467 
468 	/* any/all hw_transactions here may be used by that urb */
469 	unsigned		frame;		/* where scheduled */
470 	unsigned		pg;
471 	unsigned		index[8];	/* in urb->iso_frame_desc */
472 } __attribute__ ((aligned (32)));
473 
474 /*-------------------------------------------------------------------------*/
475 
476 /*
477  * EHCI Specification 0.95 Section 3.4
478  * siTD, aka split-transaction isochronous Transfer Descriptor
479  *       ... describe full speed iso xfers through TT in hubs
480  * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
481  */
482 struct ehci_sitd {
483 	/* first part defined by EHCI spec */
484 	__hc32			hw_next;
485 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */
486 	__hc32			hw_fullspeed_ep;	/* EHCI table 3-9 */
487 	__hc32			hw_uframe;		/* EHCI table 3-10 */
488 	__hc32			hw_results;		/* EHCI table 3-11 */
489 #define	SITD_IOC	(1 << 31)	/* interrupt on completion */
490 #define	SITD_PAGE	(1 << 30)	/* buffer 0/1 */
491 #define	SITD_LENGTH(x)	(0x3ff & ((x)>>16))
492 #define	SITD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
493 #define	SITD_STS_ERR	(1 << 6)	/* error from TT */
494 #define	SITD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
495 #define	SITD_STS_BABBLE	(1 << 4)	/* device was babbling */
496 #define	SITD_STS_XACT	(1 << 3)	/* illegal IN response */
497 #define	SITD_STS_MMF	(1 << 2)	/* incomplete split transaction */
498 #define	SITD_STS_STS	(1 << 1)	/* split transaction state */
499 
500 #define SITD_ACTIVE(ehci)	cpu_to_hc32(ehci, SITD_STS_ACTIVE)
501 
502 	__hc32			hw_buf [2];		/* EHCI table 3-12 */
503 	__hc32			hw_backpointer;		/* EHCI table 3-13 */
504 	__hc32			hw_buf_hi [2];		/* Appendix B */
505 
506 	/* the rest is HCD-private */
507 	dma_addr_t		sitd_dma;
508 	union ehci_shadow	sitd_next;	/* ptr to periodic q entry */
509 
510 	struct urb		*urb;
511 	struct ehci_iso_stream	*stream;	/* endpoint's queue */
512 	struct list_head	sitd_list;	/* list of stream's sitds */
513 	unsigned		frame;
514 	unsigned		index;
515 } __attribute__ ((aligned (32)));
516 
517 /*-------------------------------------------------------------------------*/
518 
519 /*
520  * EHCI Specification 0.96 Section 3.7
521  * Periodic Frame Span Traversal Node (FSTN)
522  *
523  * Manages split interrupt transactions (using TT) that span frame boundaries
524  * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
525  * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
526  * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
527  */
528 struct ehci_fstn {
529 	__hc32			hw_next;	/* any periodic q entry */
530 	__hc32			hw_prev;	/* qh or EHCI_LIST_END */
531 
532 	/* the rest is HCD-private */
533 	dma_addr_t		fstn_dma;
534 	union ehci_shadow	fstn_next;	/* ptr to periodic q entry */
535 } __attribute__ ((aligned (32)));
536 
537 /*-------------------------------------------------------------------------*/
538 
539 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
540 
541 #define ehci_prepare_ports_for_controller_suspend(ehci)		\
542 		ehci_adjust_port_wakeup_flags(ehci, true);
543 
544 #define ehci_prepare_ports_for_controller_resume(ehci)		\
545 		ehci_adjust_port_wakeup_flags(ehci, false);
546 
547 /*-------------------------------------------------------------------------*/
548 
549 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
550 
551 /*
552  * Some EHCI controllers have a Transaction Translator built into the
553  * root hub. This is a non-standard feature.  Each controller will need
554  * to add code to the following inline functions, and call them as
555  * needed (mostly in root hub code).
556  */
557 
558 #define	ehci_is_TDI(e)			(ehci_to_hcd(e)->has_tt)
559 
560 /* Returns the speed of a device attached to a port on the root hub. */
561 static inline unsigned int
562 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
563 {
564 	if (ehci_is_TDI(ehci)) {
565 		switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
566 		case 0:
567 			return 0;
568 		case 1:
569 			return USB_PORT_STAT_LOW_SPEED;
570 		case 2:
571 		default:
572 			return USB_PORT_STAT_HIGH_SPEED;
573 		}
574 	}
575 	return USB_PORT_STAT_HIGH_SPEED;
576 }
577 
578 #else
579 
580 #define	ehci_is_TDI(e)			(0)
581 
582 #define	ehci_port_speed(ehci, portsc)	USB_PORT_STAT_HIGH_SPEED
583 #endif
584 
585 /*-------------------------------------------------------------------------*/
586 
587 #ifdef CONFIG_PPC_83xx
588 /* Some Freescale processors have an erratum in which the TT
589  * port number in the queue head was 0..N-1 instead of 1..N.
590  */
591 #define	ehci_has_fsl_portno_bug(e)		((e)->has_fsl_port_bug)
592 #else
593 #define	ehci_has_fsl_portno_bug(e)		(0)
594 #endif
595 
596 /*
597  * While most USB host controllers implement their registers in
598  * little-endian format, a minority (celleb companion chip) implement
599  * them in big endian format.
600  *
601  * This attempts to support either format at compile time without a
602  * runtime penalty, or both formats with the additional overhead
603  * of checking a flag bit.
604  */
605 
606 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
607 #define ehci_big_endian_mmio(e)		((e)->big_endian_mmio)
608 #else
609 #define ehci_big_endian_mmio(e)		0
610 #endif
611 
612 /*
613  * Big-endian read/write functions are arch-specific.
614  * Other arches can be added if/when they're needed.
615  */
616 #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
617 #define readl_be(addr)		__raw_readl((__force unsigned *)addr)
618 #define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
619 #endif
620 
621 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
622 		__u32 __iomem * regs)
623 {
624 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
625 	return ehci_big_endian_mmio(ehci) ?
626 		readl_be(regs) :
627 		readl(regs);
628 #else
629 	return readl(regs);
630 #endif
631 }
632 
633 static inline void ehci_writel(const struct ehci_hcd *ehci,
634 		const unsigned int val, __u32 __iomem *regs)
635 {
636 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
637 	ehci_big_endian_mmio(ehci) ?
638 		writel_be(val, regs) :
639 		writel(val, regs);
640 #else
641 	writel(val, regs);
642 #endif
643 }
644 
645 /*
646  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
647  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
648  * Other common bits are dependant on has_amcc_usb23 quirk flag.
649  */
650 #ifdef CONFIG_44x
651 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
652 {
653 	u32 hc_control;
654 
655 	hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
656 	if (operational)
657 		hc_control |= OHCI_USB_OPER;
658 	else
659 		hc_control |= OHCI_USB_SUSPEND;
660 
661 	writel_be(hc_control, ehci->ohci_hcctrl_reg);
662 	(void) readl_be(ehci->ohci_hcctrl_reg);
663 }
664 #else
665 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
666 { }
667 #endif
668 
669 /*-------------------------------------------------------------------------*/
670 
671 /*
672  * The AMCC 440EPx not only implements its EHCI registers in big-endian
673  * format, but also its DMA data structures (descriptors).
674  *
675  * EHCI controllers accessed through PCI work normally (little-endian
676  * everywhere), so we won't bother supporting a BE-only mode for now.
677  */
678 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
679 #define ehci_big_endian_desc(e)		((e)->big_endian_desc)
680 
681 /* cpu to ehci */
682 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
683 {
684 	return ehci_big_endian_desc(ehci)
685 		? (__force __hc32)cpu_to_be32(x)
686 		: (__force __hc32)cpu_to_le32(x);
687 }
688 
689 /* ehci to cpu */
690 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
691 {
692 	return ehci_big_endian_desc(ehci)
693 		? be32_to_cpu((__force __be32)x)
694 		: le32_to_cpu((__force __le32)x);
695 }
696 
697 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
698 {
699 	return ehci_big_endian_desc(ehci)
700 		? be32_to_cpup((__force __be32 *)x)
701 		: le32_to_cpup((__force __le32 *)x);
702 }
703 
704 #else
705 
706 /* cpu to ehci */
707 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
708 {
709 	return cpu_to_le32(x);
710 }
711 
712 /* ehci to cpu */
713 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
714 {
715 	return le32_to_cpu(x);
716 }
717 
718 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
719 {
720 	return le32_to_cpup(x);
721 }
722 
723 #endif
724 
725 /*-------------------------------------------------------------------------*/
726 
727 #ifndef DEBUG
728 #define STUB_DEBUG_FILES
729 #endif	/* DEBUG */
730 
731 /*-------------------------------------------------------------------------*/
732 
733 #endif /* __LINUX_EHCI_HCD_H */
734