1 /* 2 * Copyright (c) 2001-2002 by David Brownell 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms of the GNU General Public License as published by the 6 * Free Software Foundation; either version 2 of the License, or (at your 7 * option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, but 10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software Foundation, 16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 17 */ 18 19 #ifndef __LINUX_EHCI_HCD_H 20 #define __LINUX_EHCI_HCD_H 21 22 /* definitions used for the EHCI driver */ 23 24 /* statistics can be kept for for tuning/monitoring */ 25 struct ehci_stats { 26 /* irq usage */ 27 unsigned long normal; 28 unsigned long error; 29 unsigned long reclaim; 30 unsigned long lost_iaa; 31 32 /* termination of urbs from core */ 33 unsigned long complete; 34 unsigned long unlink; 35 }; 36 37 /* ehci_hcd->lock guards shared data against other CPUs: 38 * ehci_hcd: async, reclaim, periodic (and shadow), ... 39 * usb_host_endpoint: hcpriv 40 * ehci_qh: qh_next, qtd_list 41 * ehci_qtd: qtd_list 42 * 43 * Also, hold this lock when talking to HC registers or 44 * when updating hw_* fields in shared qh/qtd/... structures. 45 */ 46 47 #define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ 48 49 struct ehci_hcd { /* one per controller */ 50 /* glue to PCI and HCD framework */ 51 struct ehci_caps __iomem *caps; 52 struct ehci_regs __iomem *regs; 53 struct ehci_dbg_port __iomem *debug; 54 55 __u32 hcs_params; /* cached register copy */ 56 spinlock_t lock; 57 58 /* async schedule support */ 59 struct ehci_qh *async; 60 struct ehci_qh *reclaim; 61 unsigned reclaim_ready : 1; 62 unsigned scanning : 1; 63 64 /* periodic schedule support */ 65 #define DEFAULT_I_TDPS 1024 /* some HCs can do less */ 66 unsigned periodic_size; 67 __le32 *periodic; /* hw periodic table */ 68 dma_addr_t periodic_dma; 69 unsigned i_thresh; /* uframes HC might cache */ 70 71 union ehci_shadow *pshadow; /* mirror hw periodic table */ 72 int next_uframe; /* scan periodic, start here */ 73 unsigned periodic_sched; /* periodic activity count */ 74 75 /* per root hub port */ 76 unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; 77 78 /* per-HC memory pools (could be per-bus, but ...) */ 79 struct dma_pool *qh_pool; /* qh per active urb */ 80 struct dma_pool *qtd_pool; /* one or more per qh */ 81 struct dma_pool *itd_pool; /* itd per iso urb */ 82 struct dma_pool *sitd_pool; /* sitd per split iso urb */ 83 84 struct timer_list watchdog; 85 struct notifier_block reboot_notifier; 86 unsigned long actions; 87 unsigned stamp; 88 unsigned long next_statechange; 89 u32 command; 90 91 unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */ 92 93 /* irq statistics */ 94 #ifdef EHCI_STATS 95 struct ehci_stats stats; 96 # define COUNT(x) do { (x)++; } while (0) 97 #else 98 # define COUNT(x) do {} while (0) 99 #endif 100 }; 101 102 /* convert between an HCD pointer and the corresponding EHCI_HCD */ 103 static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd) 104 { 105 return (struct ehci_hcd *) (hcd->hcd_priv); 106 } 107 static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci) 108 { 109 return container_of ((void *) ehci, struct usb_hcd, hcd_priv); 110 } 111 112 113 enum ehci_timer_action { 114 TIMER_IO_WATCHDOG, 115 TIMER_IAA_WATCHDOG, 116 TIMER_ASYNC_SHRINK, 117 TIMER_ASYNC_OFF, 118 }; 119 120 static inline void 121 timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action) 122 { 123 clear_bit (action, &ehci->actions); 124 } 125 126 static inline void 127 timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) 128 { 129 if (!test_and_set_bit (action, &ehci->actions)) { 130 unsigned long t; 131 132 switch (action) { 133 case TIMER_IAA_WATCHDOG: 134 t = EHCI_IAA_JIFFIES; 135 break; 136 case TIMER_IO_WATCHDOG: 137 t = EHCI_IO_JIFFIES; 138 break; 139 case TIMER_ASYNC_OFF: 140 t = EHCI_ASYNC_JIFFIES; 141 break; 142 // case TIMER_ASYNC_SHRINK: 143 default: 144 t = EHCI_SHRINK_JIFFIES; 145 break; 146 } 147 t += jiffies; 148 // all timings except IAA watchdog can be overridden. 149 // async queue SHRINK often precedes IAA. while it's ready 150 // to go OFF neither can matter, and afterwards the IO 151 // watchdog stops unless there's still periodic traffic. 152 if (action != TIMER_IAA_WATCHDOG 153 && t > ehci->watchdog.expires 154 && timer_pending (&ehci->watchdog)) 155 return; 156 mod_timer (&ehci->watchdog, t); 157 } 158 } 159 160 /*-------------------------------------------------------------------------*/ 161 162 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ 163 164 /* Section 2.2 Host Controller Capability Registers */ 165 struct ehci_caps { 166 /* these fields are specified as 8 and 16 bit registers, 167 * but some hosts can't perform 8 or 16 bit PCI accesses. 168 */ 169 u32 hc_capbase; 170 #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ 171 #define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ 172 u32 hcs_params; /* HCSPARAMS - offset 0x4 */ 173 #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ 174 #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ 175 #define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ 176 #define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ 177 #define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ 178 #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ 179 #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ 180 181 u32 hcc_params; /* HCCPARAMS - offset 0x8 */ 182 #define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ 183 #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ 184 #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ 185 #define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ 186 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ 187 #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ 188 u8 portroute [8]; /* nibbles for routing - offset 0xC */ 189 } __attribute__ ((packed)); 190 191 192 /* Section 2.3 Host Controller Operational Registers */ 193 struct ehci_regs { 194 195 /* USBCMD: offset 0x00 */ 196 u32 command; 197 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ 198 #define CMD_PARK (1<<11) /* enable "park" on async qh */ 199 #define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ 200 #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ 201 #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ 202 #define CMD_ASE (1<<5) /* async schedule enable */ 203 #define CMD_PSE (1<<4) /* periodic schedule enable */ 204 /* 3:2 is periodic frame list size */ 205 #define CMD_RESET (1<<1) /* reset HC not bus */ 206 #define CMD_RUN (1<<0) /* start/stop HC */ 207 208 /* USBSTS: offset 0x04 */ 209 u32 status; 210 #define STS_ASS (1<<15) /* Async Schedule Status */ 211 #define STS_PSS (1<<14) /* Periodic Schedule Status */ 212 #define STS_RECL (1<<13) /* Reclamation */ 213 #define STS_HALT (1<<12) /* Not running (any reason) */ 214 /* some bits reserved */ 215 /* these STS_* flags are also intr_enable bits (USBINTR) */ 216 #define STS_IAA (1<<5) /* Interrupted on async advance */ 217 #define STS_FATAL (1<<4) /* such as some PCI access errors */ 218 #define STS_FLR (1<<3) /* frame list rolled over */ 219 #define STS_PCD (1<<2) /* port change detect */ 220 #define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ 221 #define STS_INT (1<<0) /* "normal" completion (short, ...) */ 222 223 /* USBINTR: offset 0x08 */ 224 u32 intr_enable; 225 226 /* FRINDEX: offset 0x0C */ 227 u32 frame_index; /* current microframe number */ 228 /* CTRLDSSEGMENT: offset 0x10 */ 229 u32 segment; /* address bits 63:32 if needed */ 230 /* PERIODICLISTBASE: offset 0x14 */ 231 u32 frame_list; /* points to periodic list */ 232 /* ASYNCLISTADDR: offset 0x18 */ 233 u32 async_next; /* address of next async queue head */ 234 235 u32 reserved [9]; 236 237 /* CONFIGFLAG: offset 0x40 */ 238 u32 configured_flag; 239 #define FLAG_CF (1<<0) /* true: we'll support "high speed" */ 240 241 /* PORTSC: offset 0x44 */ 242 u32 port_status [0]; /* up to N_PORTS */ 243 /* 31:23 reserved */ 244 #define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ 245 #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ 246 #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ 247 /* 19:16 for port testing */ 248 #define PORT_LED_OFF (0<<14) 249 #define PORT_LED_AMBER (1<<14) 250 #define PORT_LED_GREEN (2<<14) 251 #define PORT_LED_MASK (3<<14) 252 #define PORT_OWNER (1<<13) /* true: companion hc owns this port */ 253 #define PORT_POWER (1<<12) /* true: has power (see PPC) */ 254 #define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */ 255 /* 11:10 for detecting lowspeed devices (reset vs release ownership) */ 256 /* 9 reserved */ 257 #define PORT_RESET (1<<8) /* reset port */ 258 #define PORT_SUSPEND (1<<7) /* suspend port */ 259 #define PORT_RESUME (1<<6) /* resume it */ 260 #define PORT_OCC (1<<5) /* over current change */ 261 #define PORT_OC (1<<4) /* over current active */ 262 #define PORT_PEC (1<<3) /* port enable change */ 263 #define PORT_PE (1<<2) /* port enable */ 264 #define PORT_CSC (1<<1) /* connect status change */ 265 #define PORT_CONNECT (1<<0) /* device connected */ 266 } __attribute__ ((packed)); 267 268 /* Appendix C, Debug port ... intended for use with special "debug devices" 269 * that can help if there's no serial console. (nonstandard enumeration.) 270 */ 271 struct ehci_dbg_port { 272 u32 control; 273 #define DBGP_OWNER (1<<30) 274 #define DBGP_ENABLED (1<<28) 275 #define DBGP_DONE (1<<16) 276 #define DBGP_INUSE (1<<10) 277 #define DBGP_ERRCODE(x) (((x)>>7)&0x07) 278 # define DBGP_ERR_BAD 1 279 # define DBGP_ERR_SIGNAL 2 280 #define DBGP_ERROR (1<<6) 281 #define DBGP_GO (1<<5) 282 #define DBGP_OUT (1<<4) 283 #define DBGP_LEN(x) (((x)>>0)&0x0f) 284 u32 pids; 285 #define DBGP_PID_GET(x) (((x)>>16)&0xff) 286 #define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)) 287 u32 data03; 288 u32 data47; 289 u32 address; 290 #define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)) 291 } __attribute__ ((packed)); 292 293 /*-------------------------------------------------------------------------*/ 294 295 #define QTD_NEXT(dma) cpu_to_le32((u32)dma) 296 297 /* 298 * EHCI Specification 0.95 Section 3.5 299 * QTD: describe data transfer components (buffer, direction, ...) 300 * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". 301 * 302 * These are associated only with "QH" (Queue Head) structures, 303 * used with control, bulk, and interrupt transfers. 304 */ 305 struct ehci_qtd { 306 /* first part defined by EHCI spec */ 307 __le32 hw_next; /* see EHCI 3.5.1 */ 308 __le32 hw_alt_next; /* see EHCI 3.5.2 */ 309 __le32 hw_token; /* see EHCI 3.5.3 */ 310 #define QTD_TOGGLE (1 << 31) /* data toggle */ 311 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) 312 #define QTD_IOC (1 << 15) /* interrupt on complete */ 313 #define QTD_CERR(tok) (((tok)>>10) & 0x3) 314 #define QTD_PID(tok) (((tok)>>8) & 0x3) 315 #define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ 316 #define QTD_STS_HALT (1 << 6) /* halted on error */ 317 #define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ 318 #define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ 319 #define QTD_STS_XACT (1 << 3) /* device gave illegal response */ 320 #define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ 321 #define QTD_STS_STS (1 << 1) /* split transaction state */ 322 #define QTD_STS_PING (1 << 0) /* issue PING? */ 323 __le32 hw_buf [5]; /* see EHCI 3.5.4 */ 324 __le32 hw_buf_hi [5]; /* Appendix B */ 325 326 /* the rest is HCD-private */ 327 dma_addr_t qtd_dma; /* qtd address */ 328 struct list_head qtd_list; /* sw qtd list */ 329 struct urb *urb; /* qtd's urb */ 330 size_t length; /* length of buffer */ 331 } __attribute__ ((aligned (32))); 332 333 /* mask NakCnt+T in qh->hw_alt_next */ 334 #define QTD_MASK __constant_cpu_to_le32 (~0x1f) 335 336 #define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1) 337 338 /*-------------------------------------------------------------------------*/ 339 340 /* type tag from {qh,itd,sitd,fstn}->hw_next */ 341 #define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1)) 342 343 /* values for that type tag */ 344 #define Q_TYPE_ITD __constant_cpu_to_le32 (0 << 1) 345 #define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1) 346 #define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1) 347 #define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1) 348 349 /* next async queue entry, or pointer to interrupt/periodic QH */ 350 #define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) 351 352 /* for periodic/async schedules and qtd lists, mark end of list */ 353 #define EHCI_LIST_END __constant_cpu_to_le32(1) /* "null pointer" to hw */ 354 355 /* 356 * Entries in periodic shadow table are pointers to one of four kinds 357 * of data structure. That's dictated by the hardware; a type tag is 358 * encoded in the low bits of the hardware's periodic schedule. Use 359 * Q_NEXT_TYPE to get the tag. 360 * 361 * For entries in the async schedule, the type tag always says "qh". 362 */ 363 union ehci_shadow { 364 struct ehci_qh *qh; /* Q_TYPE_QH */ 365 struct ehci_itd *itd; /* Q_TYPE_ITD */ 366 struct ehci_sitd *sitd; /* Q_TYPE_SITD */ 367 struct ehci_fstn *fstn; /* Q_TYPE_FSTN */ 368 __le32 *hw_next; /* (all types) */ 369 void *ptr; 370 }; 371 372 /*-------------------------------------------------------------------------*/ 373 374 /* 375 * EHCI Specification 0.95 Section 3.6 376 * QH: describes control/bulk/interrupt endpoints 377 * See Fig 3-7 "Queue Head Structure Layout". 378 * 379 * These appear in both the async and (for interrupt) periodic schedules. 380 */ 381 382 struct ehci_qh { 383 /* first part defined by EHCI spec */ 384 __le32 hw_next; /* see EHCI 3.6.1 */ 385 __le32 hw_info1; /* see EHCI 3.6.2 */ 386 #define QH_HEAD 0x00008000 387 __le32 hw_info2; /* see EHCI 3.6.2 */ 388 #define QH_SMASK 0x000000ff 389 #define QH_CMASK 0x0000ff00 390 #define QH_HUBADDR 0x007f0000 391 #define QH_HUBPORT 0x3f800000 392 #define QH_MULT 0xc0000000 393 __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ 394 395 /* qtd overlay (hardware parts of a struct ehci_qtd) */ 396 __le32 hw_qtd_next; 397 __le32 hw_alt_next; 398 __le32 hw_token; 399 __le32 hw_buf [5]; 400 __le32 hw_buf_hi [5]; 401 402 /* the rest is HCD-private */ 403 dma_addr_t qh_dma; /* address of qh */ 404 union ehci_shadow qh_next; /* ptr to qh; or periodic */ 405 struct list_head qtd_list; /* sw qtd list */ 406 struct ehci_qtd *dummy; 407 struct ehci_qh *reclaim; /* next to reclaim */ 408 409 struct ehci_hcd *ehci; 410 struct kref kref; 411 unsigned stamp; 412 413 u8 qh_state; 414 #define QH_STATE_LINKED 1 /* HC sees this */ 415 #define QH_STATE_UNLINK 2 /* HC may still see this */ 416 #define QH_STATE_IDLE 3 /* HC doesn't see this */ 417 #define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ 418 #define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ 419 420 /* periodic schedule info */ 421 u8 usecs; /* intr bandwidth */ 422 u8 gap_uf; /* uframes split/csplit gap */ 423 u8 c_usecs; /* ... split completion bw */ 424 unsigned short period; /* polling interval */ 425 unsigned short start; /* where polling starts */ 426 #define NO_FRAME ((unsigned short)~0) /* pick new start */ 427 struct usb_device *dev; /* access to TT */ 428 } __attribute__ ((aligned (32))); 429 430 /*-------------------------------------------------------------------------*/ 431 432 /* description of one iso transaction (up to 3 KB data if highspeed) */ 433 struct ehci_iso_packet { 434 /* These will be copied to iTD when scheduling */ 435 u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */ 436 __le32 transaction; /* itd->hw_transaction[i] |= */ 437 u8 cross; /* buf crosses pages */ 438 /* for full speed OUT splits */ 439 u32 buf1; 440 }; 441 442 /* temporary schedule data for packets from iso urbs (both speeds) 443 * each packet is one logical usb transaction to the device (not TT), 444 * beginning at stream->next_uframe 445 */ 446 struct ehci_iso_sched { 447 struct list_head td_list; 448 unsigned span; 449 struct ehci_iso_packet packet [0]; 450 }; 451 452 /* 453 * ehci_iso_stream - groups all (s)itds for this endpoint. 454 * acts like a qh would, if EHCI had them for ISO. 455 */ 456 struct ehci_iso_stream { 457 /* first two fields match QH, but info1 == 0 */ 458 __le32 hw_next; 459 __le32 hw_info1; 460 461 u32 refcount; 462 u8 bEndpointAddress; 463 u8 highspeed; 464 u16 depth; /* depth in uframes */ 465 struct list_head td_list; /* queued itds/sitds */ 466 struct list_head free_list; /* list of unused itds/sitds */ 467 struct usb_device *udev; 468 struct usb_host_endpoint *ep; 469 470 /* output of (re)scheduling */ 471 unsigned long start; /* jiffies */ 472 unsigned long rescheduled; 473 int next_uframe; 474 __le32 splits; 475 476 /* the rest is derived from the endpoint descriptor, 477 * trusting urb->interval == f(epdesc->bInterval) and 478 * including the extra info for hw_bufp[0..2] 479 */ 480 u8 interval; 481 u8 usecs, c_usecs; 482 u16 maxp; 483 u16 raw_mask; 484 unsigned bandwidth; 485 486 /* This is used to initialize iTD's hw_bufp fields */ 487 __le32 buf0; 488 __le32 buf1; 489 __le32 buf2; 490 491 /* this is used to initialize sITD's tt info */ 492 __le32 address; 493 }; 494 495 /*-------------------------------------------------------------------------*/ 496 497 /* 498 * EHCI Specification 0.95 Section 3.3 499 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)" 500 * 501 * Schedule records for high speed iso xfers 502 */ 503 struct ehci_itd { 504 /* first part defined by EHCI spec */ 505 __le32 hw_next; /* see EHCI 3.3.1 */ 506 __le32 hw_transaction [8]; /* see EHCI 3.3.2 */ 507 #define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */ 508 #define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */ 509 #define EHCI_ISOC_BABBLE (1<<29) /* babble detected */ 510 #define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */ 511 #define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff) 512 #define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */ 513 514 #define ITD_ACTIVE __constant_cpu_to_le32(EHCI_ISOC_ACTIVE) 515 516 __le32 hw_bufp [7]; /* see EHCI 3.3.3 */ 517 __le32 hw_bufp_hi [7]; /* Appendix B */ 518 519 /* the rest is HCD-private */ 520 dma_addr_t itd_dma; /* for this itd */ 521 union ehci_shadow itd_next; /* ptr to periodic q entry */ 522 523 struct urb *urb; 524 struct ehci_iso_stream *stream; /* endpoint's queue */ 525 struct list_head itd_list; /* list of stream's itds */ 526 527 /* any/all hw_transactions here may be used by that urb */ 528 unsigned frame; /* where scheduled */ 529 unsigned pg; 530 unsigned index[8]; /* in urb->iso_frame_desc */ 531 u8 usecs[8]; 532 } __attribute__ ((aligned (32))); 533 534 /*-------------------------------------------------------------------------*/ 535 536 /* 537 * EHCI Specification 0.95 Section 3.4 538 * siTD, aka split-transaction isochronous Transfer Descriptor 539 * ... describe full speed iso xfers through TT in hubs 540 * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD) 541 */ 542 struct ehci_sitd { 543 /* first part defined by EHCI spec */ 544 __le32 hw_next; 545 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */ 546 __le32 hw_fullspeed_ep; /* EHCI table 3-9 */ 547 __le32 hw_uframe; /* EHCI table 3-10 */ 548 __le32 hw_results; /* EHCI table 3-11 */ 549 #define SITD_IOC (1 << 31) /* interrupt on completion */ 550 #define SITD_PAGE (1 << 30) /* buffer 0/1 */ 551 #define SITD_LENGTH(x) (0x3ff & ((x)>>16)) 552 #define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */ 553 #define SITD_STS_ERR (1 << 6) /* error from TT */ 554 #define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */ 555 #define SITD_STS_BABBLE (1 << 4) /* device was babbling */ 556 #define SITD_STS_XACT (1 << 3) /* illegal IN response */ 557 #define SITD_STS_MMF (1 << 2) /* incomplete split transaction */ 558 #define SITD_STS_STS (1 << 1) /* split transaction state */ 559 560 #define SITD_ACTIVE __constant_cpu_to_le32(SITD_STS_ACTIVE) 561 562 __le32 hw_buf [2]; /* EHCI table 3-12 */ 563 __le32 hw_backpointer; /* EHCI table 3-13 */ 564 __le32 hw_buf_hi [2]; /* Appendix B */ 565 566 /* the rest is HCD-private */ 567 dma_addr_t sitd_dma; 568 union ehci_shadow sitd_next; /* ptr to periodic q entry */ 569 570 struct urb *urb; 571 struct ehci_iso_stream *stream; /* endpoint's queue */ 572 struct list_head sitd_list; /* list of stream's sitds */ 573 unsigned frame; 574 unsigned index; 575 } __attribute__ ((aligned (32))); 576 577 /*-------------------------------------------------------------------------*/ 578 579 /* 580 * EHCI Specification 0.96 Section 3.7 581 * Periodic Frame Span Traversal Node (FSTN) 582 * 583 * Manages split interrupt transactions (using TT) that span frame boundaries 584 * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN 585 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until 586 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work. 587 */ 588 struct ehci_fstn { 589 __le32 hw_next; /* any periodic q entry */ 590 __le32 hw_prev; /* qh or EHCI_LIST_END */ 591 592 /* the rest is HCD-private */ 593 dma_addr_t fstn_dma; 594 union ehci_shadow fstn_next; /* ptr to periodic q entry */ 595 } __attribute__ ((aligned (32))); 596 597 /*-------------------------------------------------------------------------*/ 598 599 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT 600 601 /* 602 * Some EHCI controllers have a Transaction Translator built into the 603 * root hub. This is a non-standard feature. Each controller will need 604 * to add code to the following inline functions, and call them as 605 * needed (mostly in root hub code). 606 */ 607 608 #define ehci_is_TDI(e) ((e)->is_tdi_rh_tt) 609 610 /* Returns the speed of a device attached to a port on the root hub. */ 611 static inline unsigned int 612 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) 613 { 614 if (ehci_is_TDI(ehci)) { 615 switch ((portsc>>26)&3) { 616 case 0: 617 return 0; 618 case 1: 619 return (1<<USB_PORT_FEAT_LOWSPEED); 620 case 2: 621 default: 622 return (1<<USB_PORT_FEAT_HIGHSPEED); 623 } 624 } 625 return (1<<USB_PORT_FEAT_HIGHSPEED); 626 } 627 628 #else 629 630 #define ehci_is_TDI(e) (0) 631 632 #define ehci_port_speed(ehci, portsc) (1<<USB_PORT_FEAT_HIGHSPEED) 633 #endif 634 635 /*-------------------------------------------------------------------------*/ 636 637 #ifndef DEBUG 638 #define STUB_DEBUG_FILES 639 #endif /* DEBUG */ 640 641 /*-------------------------------------------------------------------------*/ 642 643 #endif /* __LINUX_EHCI_HCD_H */ 644