1 /* 2 * EHCI HCD (Host Controller Driver) for USB. 3 * 4 * Bus Glue for Xilinx EHCI core on the of_platform bus 5 * 6 * Copyright (c) 2009 Xilinx, Inc. 7 * 8 * Based on "ehci-ppc-of.c" by Valentine Barshak <vbarshak@ru.mvista.com> 9 * and "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> 10 * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License as published by the 14 * Free Software Foundation; either version 2 of the License, or (at your 15 * option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, but 18 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 19 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 20 * for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software Foundation, 24 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 */ 27 28 #include <linux/err.h> 29 #include <linux/signal.h> 30 31 #include <linux/of.h> 32 #include <linux/of_platform.h> 33 #include <linux/of_address.h> 34 35 /** 36 * ehci_xilinx_port_handed_over - hand the port out if failed to enable it 37 * @hcd: Pointer to the usb_hcd device to which the host controller bound 38 * @portnum:Port number to which the device is attached. 39 * 40 * This function is used as a place to tell the user that the Xilinx USB host 41 * controller does support LS devices. And in an HS only configuration, it 42 * does not support FS devices either. It is hoped that this can help a 43 * confused user. 44 * 45 * There are cases when the host controller fails to enable the port due to, 46 * for example, insufficient power that can be supplied to the device from 47 * the USB bus. In those cases, the messages printed here are not helpful. 48 */ 49 static int ehci_xilinx_port_handed_over(struct usb_hcd *hcd, int portnum) 50 { 51 dev_warn(hcd->self.controller, "port %d cannot be enabled\n", portnum); 52 if (hcd->has_tt) { 53 dev_warn(hcd->self.controller, 54 "Maybe you have connected a low speed device?\n"); 55 56 dev_warn(hcd->self.controller, 57 "We do not support low speed devices\n"); 58 } else { 59 dev_warn(hcd->self.controller, 60 "Maybe your device is not a high speed device?\n"); 61 dev_warn(hcd->self.controller, 62 "The USB host controller does not support full speed " 63 "nor low speed devices\n"); 64 dev_warn(hcd->self.controller, 65 "You can reconfigure the host controller to have " 66 "full speed support\n"); 67 } 68 69 return 0; 70 } 71 72 73 static const struct hc_driver ehci_xilinx_of_hc_driver = { 74 .description = hcd_name, 75 .product_desc = "OF EHCI", 76 .hcd_priv_size = sizeof(struct ehci_hcd), 77 78 /* 79 * generic hardware linkage 80 */ 81 .irq = ehci_irq, 82 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, 83 84 /* 85 * basic lifecycle operations 86 */ 87 .reset = ehci_setup, 88 .start = ehci_run, 89 .stop = ehci_stop, 90 .shutdown = ehci_shutdown, 91 92 /* 93 * managing i/o requests and associated device resources 94 */ 95 .urb_enqueue = ehci_urb_enqueue, 96 .urb_dequeue = ehci_urb_dequeue, 97 .endpoint_disable = ehci_endpoint_disable, 98 .endpoint_reset = ehci_endpoint_reset, 99 100 /* 101 * scheduling support 102 */ 103 .get_frame_number = ehci_get_frame, 104 105 /* 106 * root hub support 107 */ 108 .hub_status_data = ehci_hub_status_data, 109 .hub_control = ehci_hub_control, 110 #ifdef CONFIG_PM 111 .bus_suspend = ehci_bus_suspend, 112 .bus_resume = ehci_bus_resume, 113 #endif 114 .relinquish_port = NULL, 115 .port_handed_over = ehci_xilinx_port_handed_over, 116 117 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, 118 }; 119 120 /** 121 * ehci_hcd_xilinx_of_probe - Probe method for the USB host controller 122 * @op: pointer to the platform_device bound to the host controller 123 * 124 * This function requests resources and sets up appropriate properties for the 125 * host controller. Because the Xilinx USB host controller can be configured 126 * as HS only or HS/FS only, it checks the configuration in the device tree 127 * entry, and sets an appropriate value for hcd->has_tt. 128 */ 129 static int ehci_hcd_xilinx_of_probe(struct platform_device *op) 130 { 131 struct device_node *dn = op->dev.of_node; 132 struct usb_hcd *hcd; 133 struct ehci_hcd *ehci; 134 struct resource res; 135 int irq; 136 int rv; 137 int *value; 138 139 if (usb_disabled()) 140 return -ENODEV; 141 142 dev_dbg(&op->dev, "initializing XILINX-OF USB Controller\n"); 143 144 rv = of_address_to_resource(dn, 0, &res); 145 if (rv) 146 return rv; 147 148 hcd = usb_create_hcd(&ehci_xilinx_of_hc_driver, &op->dev, 149 "XILINX-OF USB"); 150 if (!hcd) 151 return -ENOMEM; 152 153 hcd->rsrc_start = res.start; 154 hcd->rsrc_len = resource_size(&res); 155 156 irq = irq_of_parse_and_map(dn, 0); 157 if (!irq) { 158 dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", 159 __FILE__); 160 rv = -EBUSY; 161 goto err_irq; 162 } 163 164 hcd->regs = devm_ioremap_resource(&op->dev, &res); 165 if (IS_ERR(hcd->regs)) { 166 rv = PTR_ERR(hcd->regs); 167 goto err_irq; 168 } 169 170 ehci = hcd_to_ehci(hcd); 171 172 /* This core always has big-endian register interface and uses 173 * big-endian memory descriptors. 174 */ 175 ehci->big_endian_mmio = 1; 176 ehci->big_endian_desc = 1; 177 178 /* Check whether the FS support option is selected in the hardware. 179 */ 180 value = (int *)of_get_property(dn, "xlnx,support-usb-fs", NULL); 181 if (value && (*value == 1)) { 182 ehci_dbg(ehci, "USB host controller supports FS devices\n"); 183 hcd->has_tt = 1; 184 } else { 185 ehci_dbg(ehci, 186 "USB host controller is HS only\n"); 187 hcd->has_tt = 0; 188 } 189 190 /* Debug registers are at the first 0x100 region 191 */ 192 ehci->caps = hcd->regs + 0x100; 193 194 rv = usb_add_hcd(hcd, irq, 0); 195 if (rv == 0) { 196 device_wakeup_enable(hcd->self.controller); 197 return 0; 198 } 199 200 err_irq: 201 usb_put_hcd(hcd); 202 203 return rv; 204 } 205 206 /** 207 * ehci_hcd_xilinx_of_remove - shutdown hcd and release resources 208 * @op: pointer to platform_device structure that is to be removed 209 * 210 * Remove the hcd structure, and release resources that has been requested 211 * during probe. 212 */ 213 static int ehci_hcd_xilinx_of_remove(struct platform_device *op) 214 { 215 struct usb_hcd *hcd = platform_get_drvdata(op); 216 217 dev_dbg(&op->dev, "stopping XILINX-OF USB Controller\n"); 218 219 usb_remove_hcd(hcd); 220 221 usb_put_hcd(hcd); 222 223 return 0; 224 } 225 226 static const struct of_device_id ehci_hcd_xilinx_of_match[] = { 227 {.compatible = "xlnx,xps-usb-host-1.00.a",}, 228 {}, 229 }; 230 MODULE_DEVICE_TABLE(of, ehci_hcd_xilinx_of_match); 231 232 static struct platform_driver ehci_hcd_xilinx_of_driver = { 233 .probe = ehci_hcd_xilinx_of_probe, 234 .remove = ehci_hcd_xilinx_of_remove, 235 .shutdown = usb_hcd_platform_shutdown, 236 .driver = { 237 .name = "xilinx-of-ehci", 238 .owner = THIS_MODULE, 239 .of_match_table = ehci_hcd_xilinx_of_match, 240 }, 241 }; 242