xref: /linux/drivers/usb/host/ehci-orion.c (revision 249ebf3f65f8530beb2cbfb91bff1d83ba88d23c)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * drivers/usb/host/ehci-orion.c
4  *
5  * Tzachi Perelstein <tzachi@marvell.com>
6  */
7 
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/mbus.h>
12 #include <linux/clk.h>
13 #include <linux/platform_data/usb-ehci-orion.h>
14 #include <linux/of.h>
15 #include <linux/phy/phy.h>
16 #include <linux/usb.h>
17 #include <linux/usb/hcd.h>
18 #include <linux/io.h>
19 #include <linux/dma-mapping.h>
20 
21 #include "ehci.h"
22 
23 #define rdl(off)	readl_relaxed(hcd->regs + (off))
24 #define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
25 
26 #define USB_CMD			0x140
27 #define   USB_CMD_RUN		BIT(0)
28 #define   USB_CMD_RESET		BIT(1)
29 #define USB_MODE		0x1a8
30 #define   USB_MODE_MASK		GENMASK(1, 0)
31 #define   USB_MODE_DEVICE	0x2
32 #define   USB_MODE_HOST		0x3
33 #define   USB_MODE_SDIS		BIT(4)
34 #define USB_CAUSE		0x310
35 #define USB_MASK		0x314
36 #define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
37 #define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
38 #define USB_IPG			0x360
39 #define USB_PHY_PWR_CTRL	0x400
40 #define USB_PHY_TX_CTRL		0x420
41 #define USB_PHY_RX_CTRL		0x430
42 #define USB_PHY_IVREF_CTRL	0x440
43 #define USB_PHY_TST_GRP_CTRL	0x450
44 
45 #define USB_SBUSCFG		0x90
46 
47 /* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
48 #define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
49 #define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
50 /* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
51 #define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
52 
53 #define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
54 			     | USB_SBUSCFG_BARD_ALIGN_128B	\
55 			     | USB_SBUSCFG_AHBBRST_INCR16)
56 
57 #define DRIVER_DESC "EHCI orion driver"
58 
59 #define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
60 
61 struct orion_ehci_hcd {
62 	struct clk *clk;
63 	struct phy *phy;
64 };
65 
66 static struct hc_driver __read_mostly ehci_orion_hc_driver;
67 
68 /*
69  * Legacy DMA mask is 32 bit.
70  * AC5 has the DDR starting at 8GB, hence it requires
71  * a larger (34-bit) DMA mask, in order for DMA allocations
72  * to succeed:
73  */
74 static const u64 dma_mask_orion =	DMA_BIT_MASK(32);
75 static const u64 dma_mask_ac5 =		DMA_BIT_MASK(34);
76 
77 /*
78  * Implement Orion USB controller specification guidelines
79  */
80 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
81 {
82 	/* The below GLs are according to the Orion Errata document */
83 	/*
84 	 * Clear interrupt cause and mask
85 	 */
86 	wrl(USB_CAUSE, 0);
87 	wrl(USB_MASK, 0);
88 
89 	/*
90 	 * Reset controller
91 	 */
92 	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
93 	while (rdl(USB_CMD) & USB_CMD_RESET);
94 
95 	/*
96 	 * GL# USB-10: Set IPG for non start of frame packets
97 	 * Bits[14:8]=0xc
98 	 */
99 	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
100 
101 	/*
102 	 * GL# USB-9: USB 2.0 Power Control
103 	 * BG_VSEL[7:6]=0x1
104 	 */
105 	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
106 
107 	/*
108 	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
109 	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
110 	 */
111 	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
112 
113 	/*
114 	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
115 	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
116 	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
117 	 */
118 	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
119 
120 	/*
121 	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
122 	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
123 	 */
124 	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
125 
126 	/*
127 	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
128 	 * REG_FIFO_SQ_RST[15]=0
129 	 */
130 	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
131 
132 	/*
133 	 * Stop and reset controller
134 	 */
135 	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
136 	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
137 	while (rdl(USB_CMD) & USB_CMD_RESET);
138 
139 	/*
140 	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
141 	 * TBD: This need to be done after each reset!
142 	 * GL# USB-4 Setup USB Host mode
143 	 */
144 	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
145 }
146 
147 static void
148 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
149 			     const struct mbus_dram_target_info *dram)
150 {
151 	int i;
152 
153 	for (i = 0; i < 4; i++) {
154 		wrl(USB_WINDOW_CTRL(i), 0);
155 		wrl(USB_WINDOW_BASE(i), 0);
156 	}
157 
158 	for (i = 0; i < dram->num_cs; i++) {
159 		const struct mbus_dram_window *cs = dram->cs + i;
160 
161 		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
162 					(cs->mbus_attr << 8) |
163 					(dram->mbus_dram_target_id << 4) | 1);
164 		wrl(USB_WINDOW_BASE(i), cs->base);
165 	}
166 }
167 
168 static int ehci_orion_drv_reset(struct usb_hcd *hcd)
169 {
170 	struct device *dev = hcd->self.controller;
171 	int ret;
172 
173 	ret = ehci_setup(hcd);
174 	if (ret)
175 		return ret;
176 
177 	/*
178 	 * For SoC without hlock, need to program sbuscfg value to guarantee
179 	 * AHB master's burst would not overrun or underrun FIFO.
180 	 *
181 	 * sbuscfg reg has to be set after usb controller reset, otherwise
182 	 * the value would be override to 0.
183 	 */
184 	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
185 		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
186 
187 	return ret;
188 }
189 
190 static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
191 {
192 	struct usb_hcd *hcd = dev_get_drvdata(dev);
193 
194 	return ehci_suspend(hcd, device_may_wakeup(dev));
195 }
196 
197 static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
198 {
199 	struct usb_hcd *hcd = dev_get_drvdata(dev);
200 
201 	return ehci_resume(hcd, false);
202 }
203 
204 static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
205 			 ehci_orion_drv_resume);
206 
207 static const struct ehci_driver_overrides orion_overrides __initconst = {
208 	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
209 	.reset = ehci_orion_drv_reset,
210 };
211 
212 static int ehci_orion_drv_probe(struct platform_device *pdev)
213 {
214 	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
215 	const struct mbus_dram_target_info *dram;
216 	struct resource *res;
217 	struct usb_hcd *hcd;
218 	struct ehci_hcd *ehci;
219 	void __iomem *regs;
220 	int irq, err;
221 	enum orion_ehci_phy_ver phy_version;
222 	struct orion_ehci_hcd *priv;
223 	u64 *dma_mask_ptr;
224 
225 	if (usb_disabled())
226 		return -ENODEV;
227 
228 	pr_debug("Initializing Orion-SoC USB Host Controller\n");
229 
230 	irq = platform_get_irq(pdev, 0);
231 	if (irq < 0) {
232 		err = irq;
233 		goto err;
234 	}
235 
236 	/*
237 	 * Right now device-tree probed devices don't get dma_mask
238 	 * set. Since shared usb code relies on it, set it here for
239 	 * now. Once we have dma capability bindings this can go away.
240 	 */
241 	dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev);
242 	err = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr);
243 	if (err)
244 		goto err;
245 
246 	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
247 	if (IS_ERR(regs)) {
248 		err = PTR_ERR(regs);
249 		goto err;
250 	}
251 
252 	hcd = usb_create_hcd(&ehci_orion_hc_driver,
253 			&pdev->dev, dev_name(&pdev->dev));
254 	if (!hcd) {
255 		err = -ENOMEM;
256 		goto err;
257 	}
258 
259 	hcd->rsrc_start = res->start;
260 	hcd->rsrc_len = resource_size(res);
261 	hcd->regs = regs;
262 
263 	ehci = hcd_to_ehci(hcd);
264 	ehci->caps = hcd->regs + 0x100;
265 	hcd->has_tt = 1;
266 
267 	priv = hcd_to_orion_priv(hcd);
268 	/*
269 	 * Not all platforms can gate the clock, so it is not an error if
270 	 * the clock does not exists.
271 	 */
272 	priv->clk = devm_clk_get(&pdev->dev, NULL);
273 	if (!IS_ERR(priv->clk)) {
274 		err = clk_prepare_enable(priv->clk);
275 		if (err)
276 			goto err_put_hcd;
277 	}
278 
279 	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
280 	if (IS_ERR(priv->phy)) {
281 		err = PTR_ERR(priv->phy);
282 		if (err != -ENOSYS)
283 			goto err_dis_clk;
284 	}
285 
286 	/*
287 	 * (Re-)program MBUS remapping windows if we are asked to.
288 	 */
289 	dram = mv_mbus_dram_info();
290 	if (dram)
291 		ehci_orion_conf_mbus_windows(hcd, dram);
292 
293 	/*
294 	 * setup Orion USB controller.
295 	 */
296 	if (pdev->dev.of_node)
297 		phy_version = EHCI_PHY_NA;
298 	else
299 		phy_version = pd->phy_version;
300 
301 	switch (phy_version) {
302 	case EHCI_PHY_NA:	/* dont change USB phy settings */
303 		break;
304 	case EHCI_PHY_ORION:
305 		orion_usb_phy_v1_setup(hcd);
306 		break;
307 	case EHCI_PHY_DD:
308 	case EHCI_PHY_KW:
309 	default:
310 		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
311 	}
312 
313 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
314 	if (err)
315 		goto err_dis_clk;
316 
317 	device_wakeup_enable(hcd->self.controller);
318 	return 0;
319 
320 err_dis_clk:
321 	if (!IS_ERR(priv->clk))
322 		clk_disable_unprepare(priv->clk);
323 err_put_hcd:
324 	usb_put_hcd(hcd);
325 err:
326 	dev_err(&pdev->dev, "init %s fail, %d\n",
327 		dev_name(&pdev->dev), err);
328 
329 	return err;
330 }
331 
332 static void ehci_orion_drv_remove(struct platform_device *pdev)
333 {
334 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
335 	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
336 
337 	usb_remove_hcd(hcd);
338 
339 	if (!IS_ERR(priv->clk))
340 		clk_disable_unprepare(priv->clk);
341 
342 	usb_put_hcd(hcd);
343 }
344 
345 static const struct of_device_id ehci_orion_dt_ids[] = {
346 	{ .compatible = "marvell,orion-ehci", .data = &dma_mask_orion},
347 	{ .compatible = "marvell,armada-3700-ehci", .data = &dma_mask_orion},
348 	{ .compatible = "marvell,ac5-ehci", .data = &dma_mask_ac5},
349 	{},
350 };
351 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
352 
353 static struct platform_driver ehci_orion_driver = {
354 	.probe		= ehci_orion_drv_probe,
355 	.remove_new	= ehci_orion_drv_remove,
356 	.shutdown	= usb_hcd_platform_shutdown,
357 	.driver = {
358 		.name	= "orion-ehci",
359 		.of_match_table = ehci_orion_dt_ids,
360 		.pm = &ehci_orion_pm_ops,
361 	},
362 };
363 
364 static int __init ehci_orion_init(void)
365 {
366 	if (usb_disabled())
367 		return -ENODEV;
368 
369 	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
370 	return platform_driver_register(&ehci_orion_driver);
371 }
372 module_init(ehci_orion_init);
373 
374 static void __exit ehci_orion_cleanup(void)
375 {
376 	platform_driver_unregister(&ehci_orion_driver);
377 }
378 module_exit(ehci_orion_cleanup);
379 
380 MODULE_DESCRIPTION(DRIVER_DESC);
381 MODULE_ALIAS("platform:orion-ehci");
382 MODULE_AUTHOR("Tzachi Perelstein");
383 MODULE_LICENSE("GPL v2");
384