1 /* 2 * Copyright 2005-2009 MontaVista Software, Inc. 3 * Copyright 2008,2012 Freescale Semiconductor, Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License as published by the 7 * Free Software Foundation; either version 2 of the License, or (at your 8 * option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software Foundation, 17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 * 19 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided 20 * by Hunter Wu. 21 * Power Management support by Dave Liu <daveliu@freescale.com>, 22 * Jerry Huang <Chang-Ming.Huang@freescale.com> and 23 * Anton Vorontsov <avorontsov@ru.mvista.com>. 24 */ 25 26 #include <linux/kernel.h> 27 #include <linux/types.h> 28 #include <linux/delay.h> 29 #include <linux/pm.h> 30 #include <linux/err.h> 31 #include <linux/platform_device.h> 32 #include <linux/fsl_devices.h> 33 34 #include "ehci-fsl.h" 35 36 /* configure so an HC device and id are always provided */ 37 /* always called with process context; sleeping is OK */ 38 39 /** 40 * usb_hcd_fsl_probe - initialize FSL-based HCDs 41 * @drvier: Driver to be used for this HCD 42 * @pdev: USB Host Controller being probed 43 * Context: !in_interrupt() 44 * 45 * Allocates basic resources for this USB host controller. 46 * 47 */ 48 static int usb_hcd_fsl_probe(const struct hc_driver *driver, 49 struct platform_device *pdev) 50 { 51 struct fsl_usb2_platform_data *pdata; 52 struct usb_hcd *hcd; 53 struct resource *res; 54 int irq; 55 int retval; 56 57 pr_debug("initializing FSL-SOC USB Controller\n"); 58 59 /* Need platform data for setup */ 60 pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data; 61 if (!pdata) { 62 dev_err(&pdev->dev, 63 "No platform data for %s.\n", dev_name(&pdev->dev)); 64 return -ENODEV; 65 } 66 67 /* 68 * This is a host mode driver, verify that we're supposed to be 69 * in host mode. 70 */ 71 if (!((pdata->operating_mode == FSL_USB2_DR_HOST) || 72 (pdata->operating_mode == FSL_USB2_MPH_HOST) || 73 (pdata->operating_mode == FSL_USB2_DR_OTG))) { 74 dev_err(&pdev->dev, 75 "Non Host Mode configured for %s. Wrong driver linked.\n", 76 dev_name(&pdev->dev)); 77 return -ENODEV; 78 } 79 80 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 81 if (!res) { 82 dev_err(&pdev->dev, 83 "Found HC with no IRQ. Check %s setup!\n", 84 dev_name(&pdev->dev)); 85 return -ENODEV; 86 } 87 irq = res->start; 88 89 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); 90 if (!hcd) { 91 retval = -ENOMEM; 92 goto err1; 93 } 94 95 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 96 if (!res) { 97 dev_err(&pdev->dev, 98 "Found HC with no register addr. Check %s setup!\n", 99 dev_name(&pdev->dev)); 100 retval = -ENODEV; 101 goto err2; 102 } 103 hcd->rsrc_start = res->start; 104 hcd->rsrc_len = resource_size(res); 105 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, 106 driver->description)) { 107 dev_dbg(&pdev->dev, "controller already in use\n"); 108 retval = -EBUSY; 109 goto err2; 110 } 111 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 112 113 if (hcd->regs == NULL) { 114 dev_dbg(&pdev->dev, "error mapping memory\n"); 115 retval = -EFAULT; 116 goto err3; 117 } 118 119 pdata->regs = hcd->regs; 120 121 if (pdata->power_budget) 122 hcd->power_budget = pdata->power_budget; 123 124 /* 125 * do platform specific init: check the clock, grab/config pins, etc. 126 */ 127 if (pdata->init && pdata->init(pdev)) { 128 retval = -ENODEV; 129 goto err4; 130 } 131 132 /* Enable USB controller, 83xx or 8536 */ 133 if (pdata->have_sysif_regs) 134 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); 135 136 /* Don't need to set host mode here. It will be done by tdi_reset() */ 137 138 retval = usb_add_hcd(hcd, irq, IRQF_SHARED); 139 if (retval != 0) 140 goto err4; 141 142 #ifdef CONFIG_USB_OTG 143 if (pdata->operating_mode == FSL_USB2_DR_OTG) { 144 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 145 146 hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); 147 dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", 148 hcd, ehci, hcd->phy); 149 150 if (!IS_ERR_OR_NULL(hcd->phy)) { 151 retval = otg_set_host(hcd->phy->otg, 152 &ehci_to_hcd(ehci)->self); 153 if (retval) { 154 usb_put_phy(hcd->phy); 155 goto err4; 156 } 157 } else { 158 dev_err(&pdev->dev, "can't find phy\n"); 159 retval = -ENODEV; 160 goto err4; 161 } 162 } 163 #endif 164 return retval; 165 166 err4: 167 iounmap(hcd->regs); 168 err3: 169 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 170 err2: 171 usb_put_hcd(hcd); 172 err1: 173 dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); 174 if (pdata->exit) 175 pdata->exit(pdev); 176 return retval; 177 } 178 179 /* may be called without controller electrically present */ 180 /* may be called with controller, bus, and devices active */ 181 182 /** 183 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs 184 * @dev: USB Host Controller being removed 185 * Context: !in_interrupt() 186 * 187 * Reverses the effect of usb_hcd_fsl_probe(). 188 * 189 */ 190 static void usb_hcd_fsl_remove(struct usb_hcd *hcd, 191 struct platform_device *pdev) 192 { 193 struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; 194 195 if (!IS_ERR_OR_NULL(hcd->phy)) { 196 otg_set_host(hcd->phy->otg, NULL); 197 usb_put_phy(hcd->phy); 198 } 199 200 usb_remove_hcd(hcd); 201 202 /* 203 * do platform specific un-initialization: 204 * release iomux pins, disable clock, etc. 205 */ 206 if (pdata->exit) 207 pdata->exit(pdev); 208 iounmap(hcd->regs); 209 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 210 usb_put_hcd(hcd); 211 } 212 213 static int ehci_fsl_setup_phy(struct usb_hcd *hcd, 214 enum fsl_usb2_phy_modes phy_mode, 215 unsigned int port_offset) 216 { 217 u32 portsc; 218 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 219 void __iomem *non_ehci = hcd->regs; 220 struct device *dev = hcd->self.controller; 221 struct fsl_usb2_platform_data *pdata = dev->platform_data; 222 223 if (pdata->controller_ver < 0) { 224 dev_warn(hcd->self.controller, "Could not get controller version\n"); 225 return -ENODEV; 226 } 227 228 portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); 229 portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); 230 231 switch (phy_mode) { 232 case FSL_USB2_PHY_ULPI: 233 if (pdata->controller_ver) { 234 /* controller version 1.6 or above */ 235 setbits32(non_ehci + FSL_SOC_USB_CTRL, 236 ULPI_PHY_CLK_SEL); 237 /* 238 * Due to controller issue of PHY_CLK_VALID in ULPI 239 * mode, we set USB_CTRL_USB_EN before checking 240 * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. 241 */ 242 clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, 243 UTMI_PHY_EN, USB_CTRL_USB_EN); 244 } 245 portsc |= PORT_PTS_ULPI; 246 break; 247 case FSL_USB2_PHY_SERIAL: 248 portsc |= PORT_PTS_SERIAL; 249 break; 250 case FSL_USB2_PHY_UTMI_WIDE: 251 portsc |= PORT_PTS_PTW; 252 /* fall through */ 253 case FSL_USB2_PHY_UTMI: 254 if (pdata->controller_ver) { 255 /* controller version 1.6 or above */ 256 setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); 257 mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to 258 become stable - 10ms*/ 259 } 260 /* enable UTMI PHY */ 261 if (pdata->have_sysif_regs) 262 setbits32(non_ehci + FSL_SOC_USB_CTRL, 263 CTRL_UTMI_PHY_EN); 264 portsc |= PORT_PTS_UTMI; 265 break; 266 case FSL_USB2_PHY_NONE: 267 break; 268 } 269 270 if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { 271 /* check PHY_CLK_VALID to get phy clk valid */ 272 if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & 273 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { 274 printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); 275 return -EINVAL; 276 } 277 } 278 279 ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); 280 281 if (phy_mode != FSL_USB2_PHY_ULPI) 282 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); 283 284 return 0; 285 } 286 287 static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) 288 { 289 struct usb_hcd *hcd = ehci_to_hcd(ehci); 290 struct fsl_usb2_platform_data *pdata; 291 void __iomem *non_ehci = hcd->regs; 292 293 pdata = hcd->self.controller->platform_data; 294 295 if (pdata->have_sysif_regs) { 296 /* 297 * Turn on cache snooping hardware, since some PowerPC platforms 298 * wholly rely on hardware to deal with cache coherent 299 */ 300 301 /* Setup Snooping for all the 4GB space */ 302 /* SNOOP1 starts from 0x0, size 2G */ 303 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); 304 /* SNOOP2 starts from 0x80000000, size 2G */ 305 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); 306 } 307 308 if ((pdata->operating_mode == FSL_USB2_DR_HOST) || 309 (pdata->operating_mode == FSL_USB2_DR_OTG)) 310 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) 311 return -EINVAL; 312 313 if (pdata->operating_mode == FSL_USB2_MPH_HOST) { 314 unsigned int chip, rev, svr; 315 316 svr = mfspr(SPRN_SVR); 317 chip = svr >> 16; 318 rev = (svr >> 4) & 0xf; 319 320 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ 321 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) 322 ehci->has_fsl_port_bug = 1; 323 324 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) 325 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) 326 return -EINVAL; 327 328 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) 329 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) 330 return -EINVAL; 331 } 332 333 if (pdata->have_sysif_regs) { 334 #ifdef CONFIG_FSL_SOC_BOOKE 335 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008); 336 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080); 337 #else 338 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c); 339 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040); 340 #endif 341 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); 342 } 343 344 return 0; 345 } 346 347 /* called after powerup, by probe or system-pm "wakeup" */ 348 static int ehci_fsl_reinit(struct ehci_hcd *ehci) 349 { 350 if (ehci_fsl_usb_setup(ehci)) 351 return -EINVAL; 352 353 return 0; 354 } 355 356 /* called during probe() after chip reset completes */ 357 static int ehci_fsl_setup(struct usb_hcd *hcd) 358 { 359 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 360 int retval; 361 struct fsl_usb2_platform_data *pdata; 362 struct device *dev; 363 364 dev = hcd->self.controller; 365 pdata = hcd->self.controller->platform_data; 366 ehci->big_endian_desc = pdata->big_endian_desc; 367 ehci->big_endian_mmio = pdata->big_endian_mmio; 368 369 /* EHCI registers start at offset 0x100 */ 370 ehci->caps = hcd->regs + 0x100; 371 372 hcd->has_tt = 1; 373 374 retval = ehci_setup(hcd); 375 if (retval) 376 return retval; 377 378 if (of_device_is_compatible(dev->parent->of_node, 379 "fsl,mpc5121-usb2-dr")) { 380 /* 381 * set SBUSCFG:AHBBRST so that control msgs don't 382 * fail when doing heavy PATA writes. 383 */ 384 ehci_writel(ehci, SBUSCFG_INCR8, 385 hcd->regs + FSL_SOC_USB_SBUSCFG); 386 } 387 388 retval = ehci_fsl_reinit(ehci); 389 return retval; 390 } 391 392 struct ehci_fsl { 393 struct ehci_hcd ehci; 394 395 #ifdef CONFIG_PM 396 /* Saved USB PHY settings, need to restore after deep sleep. */ 397 u32 usb_ctrl; 398 #endif 399 }; 400 401 #ifdef CONFIG_PM 402 403 #ifdef CONFIG_PPC_MPC512x 404 static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) 405 { 406 struct usb_hcd *hcd = dev_get_drvdata(dev); 407 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 408 struct fsl_usb2_platform_data *pdata = dev->platform_data; 409 u32 tmp; 410 411 #ifdef DEBUG 412 u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE); 413 mode &= USBMODE_CM_MASK; 414 tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */ 415 416 dev_dbg(dev, "suspend=%d already_suspended=%d " 417 "mode=%d usbcmd %08x\n", pdata->suspended, 418 pdata->already_suspended, mode, tmp); 419 #endif 420 421 /* 422 * If the controller is already suspended, then this must be a 423 * PM suspend. Remember this fact, so that we will leave the 424 * controller suspended at PM resume time. 425 */ 426 if (pdata->suspended) { 427 dev_dbg(dev, "already suspended, leaving early\n"); 428 pdata->already_suspended = 1; 429 return 0; 430 } 431 432 dev_dbg(dev, "suspending...\n"); 433 434 ehci->rh_state = EHCI_RH_SUSPENDED; 435 dev->power.power_state = PMSG_SUSPEND; 436 437 /* ignore non-host interrupts */ 438 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 439 440 /* stop the controller */ 441 tmp = ehci_readl(ehci, &ehci->regs->command); 442 tmp &= ~CMD_RUN; 443 ehci_writel(ehci, tmp, &ehci->regs->command); 444 445 /* save EHCI registers */ 446 pdata->pm_command = ehci_readl(ehci, &ehci->regs->command); 447 pdata->pm_command &= ~CMD_RUN; 448 pdata->pm_status = ehci_readl(ehci, &ehci->regs->status); 449 pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable); 450 pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index); 451 pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment); 452 pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list); 453 pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next); 454 pdata->pm_configured_flag = 455 ehci_readl(ehci, &ehci->regs->configured_flag); 456 pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); 457 pdata->pm_usbgenctrl = ehci_readl(ehci, 458 hcd->regs + FSL_SOC_USB_USBGENCTRL); 459 460 /* clear the W1C bits */ 461 pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); 462 463 pdata->suspended = 1; 464 465 /* clear PP to cut power to the port */ 466 tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); 467 tmp &= ~PORT_POWER; 468 ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); 469 470 return 0; 471 } 472 473 static int ehci_fsl_mpc512x_drv_resume(struct device *dev) 474 { 475 struct usb_hcd *hcd = dev_get_drvdata(dev); 476 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 477 struct fsl_usb2_platform_data *pdata = dev->platform_data; 478 u32 tmp; 479 480 dev_dbg(dev, "suspend=%d already_suspended=%d\n", 481 pdata->suspended, pdata->already_suspended); 482 483 /* 484 * If the controller was already suspended at suspend time, 485 * then don't resume it now. 486 */ 487 if (pdata->already_suspended) { 488 dev_dbg(dev, "already suspended, leaving early\n"); 489 pdata->already_suspended = 0; 490 return 0; 491 } 492 493 if (!pdata->suspended) { 494 dev_dbg(dev, "not suspended, leaving early\n"); 495 return 0; 496 } 497 498 pdata->suspended = 0; 499 500 dev_dbg(dev, "resuming...\n"); 501 502 /* set host mode */ 503 tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); 504 ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); 505 506 ehci_writel(ehci, pdata->pm_usbgenctrl, 507 hcd->regs + FSL_SOC_USB_USBGENCTRL); 508 ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, 509 hcd->regs + FSL_SOC_USB_ISIPHYCTRL); 510 511 ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); 512 513 /* restore EHCI registers */ 514 ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); 515 ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); 516 ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index); 517 ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment); 518 ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list); 519 ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next); 520 ehci_writel(ehci, pdata->pm_configured_flag, 521 &ehci->regs->configured_flag); 522 ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); 523 524 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 525 ehci->rh_state = EHCI_RH_RUNNING; 526 dev->power.power_state = PMSG_ON; 527 528 tmp = ehci_readl(ehci, &ehci->regs->command); 529 tmp |= CMD_RUN; 530 ehci_writel(ehci, tmp, &ehci->regs->command); 531 532 usb_hcd_resume_root_hub(hcd); 533 534 return 0; 535 } 536 #else 537 static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev) 538 { 539 return 0; 540 } 541 542 static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev) 543 { 544 return 0; 545 } 546 #endif /* CONFIG_PPC_MPC512x */ 547 548 static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) 549 { 550 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 551 552 return container_of(ehci, struct ehci_fsl, ehci); 553 } 554 555 static int ehci_fsl_drv_suspend(struct device *dev) 556 { 557 struct usb_hcd *hcd = dev_get_drvdata(dev); 558 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); 559 void __iomem *non_ehci = hcd->regs; 560 561 if (of_device_is_compatible(dev->parent->of_node, 562 "fsl,mpc5121-usb2-dr")) { 563 return ehci_fsl_mpc512x_drv_suspend(dev); 564 } 565 566 ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), 567 device_may_wakeup(dev)); 568 if (!fsl_deep_sleep()) 569 return 0; 570 571 ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL); 572 return 0; 573 } 574 575 static int ehci_fsl_drv_resume(struct device *dev) 576 { 577 struct usb_hcd *hcd = dev_get_drvdata(dev); 578 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); 579 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 580 void __iomem *non_ehci = hcd->regs; 581 582 if (of_device_is_compatible(dev->parent->of_node, 583 "fsl,mpc5121-usb2-dr")) { 584 return ehci_fsl_mpc512x_drv_resume(dev); 585 } 586 587 ehci_prepare_ports_for_controller_resume(ehci); 588 if (!fsl_deep_sleep()) 589 return 0; 590 591 usb_root_hub_lost_power(hcd->self.root_hub); 592 593 /* Restore USB PHY settings and enable the controller. */ 594 out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl); 595 596 ehci_reset(ehci); 597 ehci_fsl_reinit(ehci); 598 599 return 0; 600 } 601 602 static int ehci_fsl_drv_restore(struct device *dev) 603 { 604 struct usb_hcd *hcd = dev_get_drvdata(dev); 605 606 usb_root_hub_lost_power(hcd->self.root_hub); 607 return 0; 608 } 609 610 static struct dev_pm_ops ehci_fsl_pm_ops = { 611 .suspend = ehci_fsl_drv_suspend, 612 .resume = ehci_fsl_drv_resume, 613 .restore = ehci_fsl_drv_restore, 614 }; 615 616 #define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) 617 #else 618 #define EHCI_FSL_PM_OPS NULL 619 #endif /* CONFIG_PM */ 620 621 #ifdef CONFIG_USB_OTG 622 static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) 623 { 624 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 625 u32 status; 626 627 if (!port) 628 return -EINVAL; 629 630 port--; 631 632 /* start port reset before HNP protocol time out */ 633 status = readl(&ehci->regs->port_status[port]); 634 if (!(status & PORT_CONNECT)) 635 return -ENODEV; 636 637 /* khubd will finish the reset later */ 638 if (ehci_is_TDI(ehci)) { 639 writel(PORT_RESET | 640 (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)), 641 &ehci->regs->port_status[port]); 642 } else { 643 writel(PORT_RESET, &ehci->regs->port_status[port]); 644 } 645 646 return 0; 647 } 648 #else 649 #define ehci_start_port_reset NULL 650 #endif /* CONFIG_USB_OTG */ 651 652 653 static const struct hc_driver ehci_fsl_hc_driver = { 654 .description = hcd_name, 655 .product_desc = "Freescale On-Chip EHCI Host Controller", 656 .hcd_priv_size = sizeof(struct ehci_fsl), 657 658 /* 659 * generic hardware linkage 660 */ 661 .irq = ehci_irq, 662 .flags = HCD_USB2 | HCD_MEMORY, 663 664 /* 665 * basic lifecycle operations 666 */ 667 .reset = ehci_fsl_setup, 668 .start = ehci_run, 669 .stop = ehci_stop, 670 .shutdown = ehci_shutdown, 671 672 /* 673 * managing i/o requests and associated device resources 674 */ 675 .urb_enqueue = ehci_urb_enqueue, 676 .urb_dequeue = ehci_urb_dequeue, 677 .endpoint_disable = ehci_endpoint_disable, 678 .endpoint_reset = ehci_endpoint_reset, 679 680 /* 681 * scheduling support 682 */ 683 .get_frame_number = ehci_get_frame, 684 685 /* 686 * root hub support 687 */ 688 .hub_status_data = ehci_hub_status_data, 689 .hub_control = ehci_hub_control, 690 .bus_suspend = ehci_bus_suspend, 691 .bus_resume = ehci_bus_resume, 692 .start_port_reset = ehci_start_port_reset, 693 .relinquish_port = ehci_relinquish_port, 694 .port_handed_over = ehci_port_handed_over, 695 696 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, 697 }; 698 699 static int ehci_fsl_drv_probe(struct platform_device *pdev) 700 { 701 if (usb_disabled()) 702 return -ENODEV; 703 704 /* FIXME we only want one one probe() not two */ 705 return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); 706 } 707 708 static int ehci_fsl_drv_remove(struct platform_device *pdev) 709 { 710 struct usb_hcd *hcd = platform_get_drvdata(pdev); 711 712 /* FIXME we only want one one remove() not two */ 713 usb_hcd_fsl_remove(hcd, pdev); 714 return 0; 715 } 716 717 MODULE_ALIAS("platform:fsl-ehci"); 718 719 static struct platform_driver ehci_fsl_driver = { 720 .probe = ehci_fsl_drv_probe, 721 .remove = ehci_fsl_drv_remove, 722 .shutdown = usb_hcd_platform_shutdown, 723 .driver = { 724 .name = "fsl-ehci", 725 .pm = EHCI_FSL_PM_OPS, 726 }, 727 }; 728