1 /* 2 * NetChip 2280 high/full speed USB device controller. 3 * Unlike many such controllers, this one talks PCI. 4 */ 5 6 /* 7 * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) 8 * Copyright (C) 2003 David Brownell 9 * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 */ 16 17 #include <linux/usb/net2280.h> 18 #include <linux/usb/usb338x.h> 19 20 /*-------------------------------------------------------------------------*/ 21 22 #ifdef __KERNEL__ 23 24 /* indexed registers [11.10] are accessed indirectly 25 * caller must own the device lock. 26 */ 27 28 static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index) 29 { 30 writel(index, ®s->idxaddr); 31 /* NOTE: synchs device/cpu memory views */ 32 return readl(®s->idxdata); 33 } 34 35 static inline void 36 set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value) 37 { 38 writel(index, ®s->idxaddr); 39 writel(value, ®s->idxdata); 40 /* posted, may not be visible yet */ 41 } 42 43 #endif /* __KERNEL__ */ 44 45 #define PCI_VENDOR_ID_PLX_LEGACY 0x17cc 46 47 #define PLX_LEGACY BIT(0) 48 #define PLX_2280 BIT(1) 49 #define PLX_SUPERSPEED BIT(2) 50 51 #define REG_DIAG 0x0 52 #define RETRY_COUNTER 16 53 #define FORCE_PCI_SERR 11 54 #define FORCE_PCI_INTERRUPT 10 55 #define FORCE_USB_INTERRUPT 9 56 #define FORCE_CPU_INTERRUPT 8 57 #define ILLEGAL_BYTE_ENABLES 5 58 #define FAST_TIMES 4 59 #define FORCE_RECEIVE_ERROR 2 60 #define FORCE_TRANSMIT_CRC_ERROR 0 61 #define REG_FRAME 0x02 /* from last sof */ 62 #define REG_CHIPREV 0x03 /* in bcd */ 63 #define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ 64 65 #define CHIPREV_1 0x0100 66 #define CHIPREV_1A 0x0110 67 68 /* DEFECT 7374 */ 69 #define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200 70 #define DEFECT_7374_PROCESSOR_WAIT_TIME 10 71 72 /* ep0 max packet size */ 73 #define EP0_SS_MAX_PACKET_SIZE 0x200 74 #define EP0_HS_MAX_PACKET_SIZE 0x40 75 #ifdef __KERNEL__ 76 77 /*-------------------------------------------------------------------------*/ 78 79 /* [8.3] for scatter/gather i/o 80 * use struct net2280_dma_regs bitfields 81 */ 82 struct net2280_dma { 83 __le32 dmacount; 84 __le32 dmaaddr; /* the buffer */ 85 __le32 dmadesc; /* next dma descriptor */ 86 __le32 _reserved; 87 } __aligned(16); 88 89 /*-------------------------------------------------------------------------*/ 90 91 /* DRIVER DATA STRUCTURES and UTILITIES */ 92 93 struct net2280_ep { 94 struct usb_ep ep; 95 struct net2280_ep_regs __iomem *cfg; 96 struct net2280_ep_regs __iomem *regs; 97 struct net2280_dma_regs __iomem *dma; 98 struct net2280_dma *dummy; 99 dma_addr_t td_dma; /* of dummy */ 100 struct net2280 *dev; 101 unsigned long irqs; 102 103 /* analogous to a host-side qh */ 104 struct list_head queue; 105 const struct usb_endpoint_descriptor *desc; 106 unsigned num : 8, 107 fifo_size : 12, 108 in_fifo_validate : 1, 109 out_overflow : 1, 110 stopped : 1, 111 wedged : 1, 112 is_in : 1, 113 is_iso : 1, 114 responded : 1; 115 }; 116 117 static inline void allow_status(struct net2280_ep *ep) 118 { 119 /* ep0 only */ 120 writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | 121 BIT(CLEAR_NAK_OUT_PACKETS) | 122 BIT(CLEAR_NAK_OUT_PACKETS_MODE), 123 &ep->regs->ep_rsp); 124 ep->stopped = 1; 125 } 126 127 static inline void allow_status_338x(struct net2280_ep *ep) 128 { 129 /* 130 * Control Status Phase Handshake was set by the chip when the setup 131 * packet arrived. While set, the chip automatically NAKs the host's 132 * Status Phase tokens. 133 */ 134 writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp); 135 136 ep->stopped = 1; 137 138 /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */ 139 ep->responded = 0; 140 } 141 142 struct net2280_request { 143 struct usb_request req; 144 struct net2280_dma *td; 145 dma_addr_t td_dma; 146 struct list_head queue; 147 unsigned mapped : 1, 148 valid : 1; 149 }; 150 151 struct net2280 { 152 /* each pci device provides one gadget, several endpoints */ 153 struct usb_gadget gadget; 154 spinlock_t lock; 155 struct net2280_ep ep[9]; 156 struct usb_gadget_driver *driver; 157 unsigned enabled : 1, 158 protocol_stall : 1, 159 softconnect : 1, 160 got_irq : 1, 161 region:1, 162 u1_enable:1, 163 u2_enable:1, 164 ltm_enable:1, 165 wakeup_enable:1, 166 addressed_state:1, 167 bug7734_patched:1; 168 u16 chiprev; 169 int enhanced_mode; 170 int n_ep; 171 kernel_ulong_t quirks; 172 173 174 /* pci state used to access those endpoints */ 175 struct pci_dev *pdev; 176 struct net2280_regs __iomem *regs; 177 struct net2280_usb_regs __iomem *usb; 178 struct usb338x_usb_ext_regs __iomem *usb_ext; 179 struct net2280_pci_regs __iomem *pci; 180 struct net2280_dma_regs __iomem *dma; 181 struct net2280_dep_regs __iomem *dep; 182 struct net2280_ep_regs __iomem *epregs; 183 struct usb338x_ll_regs __iomem *llregs; 184 struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; 185 struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; 186 struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; 187 struct usb338x_pl_regs __iomem *plregs; 188 189 struct pci_pool *requests; 190 /* statistics...*/ 191 }; 192 193 static inline void set_halt(struct net2280_ep *ep) 194 { 195 /* ep0 and bulk/intr endpoints */ 196 writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | 197 /* set NAK_OUT for erratum 0114 */ 198 ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) | 199 BIT(SET_ENDPOINT_HALT), 200 &ep->regs->ep_rsp); 201 } 202 203 static inline void clear_halt(struct net2280_ep *ep) 204 { 205 /* ep0 and bulk/intr endpoints */ 206 writel(BIT(CLEAR_ENDPOINT_HALT) | 207 BIT(CLEAR_ENDPOINT_TOGGLE) | 208 /* 209 * unless the gadget driver left a short packet in the 210 * fifo, this reverses the erratum 0114 workaround. 211 */ 212 ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS), 213 &ep->regs->ep_rsp); 214 } 215 216 /* 217 * FSM value for Defect 7374 (U1U2 Test) is managed in 218 * chip's SCRATCH register: 219 */ 220 #define DEFECT7374_FSM_FIELD 28 221 222 /* Waiting for Control Read: 223 * - A transition to this state indicates a fresh USB connection, 224 * before the first Setup Packet. The connection speed is not 225 * known. Firmware is waiting for the first Control Read. 226 * - Starting state: This state can be thought of as the FSM's typical 227 * starting state. 228 * - Tip: Upon the first SS Control Read the FSM never 229 * returns to this state. 230 */ 231 #define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD) 232 233 /* Non-SS Control Read: 234 * - A transition to this state indicates detection of the first HS 235 * or FS Control Read. 236 * - Tip: Upon the first SS Control Read the FSM never 237 * returns to this state. 238 */ 239 #define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD) 240 241 /* SS Control Read: 242 * - A transition to this state indicates detection of the 243 * first SS Control Read. 244 * - This state indicates workaround completion. Workarounds no longer 245 * need to be applied (as long as the chip remains powered up). 246 * - Tip: Once in this state the FSM state does not change (until 247 * the chip's power is lost and restored). 248 * - This can be thought of as the final state of the FSM; 249 * the FSM 'locks-up' in this state until the chip loses power. 250 */ 251 #define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD) 252 253 #ifdef USE_RDK_LEDS 254 255 static inline void net2280_led_init(struct net2280 *dev) 256 { 257 /* LED3 (green) is on during USB activity. note erratum 0113. */ 258 writel(BIT(GPIO3_LED_SELECT) | 259 BIT(GPIO3_OUTPUT_ENABLE) | 260 BIT(GPIO2_OUTPUT_ENABLE) | 261 BIT(GPIO1_OUTPUT_ENABLE) | 262 BIT(GPIO0_OUTPUT_ENABLE), 263 &dev->regs->gpioctl); 264 } 265 266 /* indicate speed with bi-color LED 0/1 */ 267 static inline 268 void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed) 269 { 270 u32 val = readl(&dev->regs->gpioctl); 271 switch (speed) { 272 case USB_SPEED_SUPER: /* green + red */ 273 val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA); 274 break; 275 case USB_SPEED_HIGH: /* green */ 276 val &= ~BIT(GPIO0_DATA); 277 val |= BIT(GPIO1_DATA); 278 break; 279 case USB_SPEED_FULL: /* red */ 280 val &= ~BIT(GPIO1_DATA); 281 val |= BIT(GPIO0_DATA); 282 break; 283 default: /* (off/black) */ 284 val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA)); 285 break; 286 } 287 writel(val, &dev->regs->gpioctl); 288 } 289 290 /* indicate power with LED 2 */ 291 static inline void net2280_led_active(struct net2280 *dev, int is_active) 292 { 293 u32 val = readl(&dev->regs->gpioctl); 294 295 /* FIXME this LED never seems to turn on.*/ 296 if (is_active) 297 val |= GPIO2_DATA; 298 else 299 val &= ~GPIO2_DATA; 300 writel(val, &dev->regs->gpioctl); 301 } 302 303 static inline void net2280_led_shutdown(struct net2280 *dev) 304 { 305 /* turn off all four GPIO*_DATA bits */ 306 writel(readl(&dev->regs->gpioctl) & ~0x0f, 307 &dev->regs->gpioctl); 308 } 309 310 #else 311 312 #define net2280_led_init(dev) do { } while (0) 313 #define net2280_led_speed(dev, speed) do { } while (0) 314 #define net2280_led_shutdown(dev) do { } while (0) 315 316 #endif 317 318 /*-------------------------------------------------------------------------*/ 319 320 #define ep_dbg(ndev, fmt, args...) \ 321 dev_dbg((&((ndev)->pdev->dev)), fmt, ##args) 322 323 #define ep_vdbg(ndev, fmt, args...) \ 324 dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args) 325 326 #define ep_info(ndev, fmt, args...) \ 327 dev_info((&((ndev)->pdev->dev)), fmt, ##args) 328 329 #define ep_warn(ndev, fmt, args...) \ 330 dev_warn((&((ndev)->pdev->dev)), fmt, ##args) 331 332 #define ep_err(ndev, fmt, args...) \ 333 dev_err((&((ndev)->pdev->dev)), fmt, ##args) 334 335 /*-------------------------------------------------------------------------*/ 336 337 static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count) 338 { 339 if (ep->dev->pdev->vendor == 0x17cc) 340 writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); 341 else{ 342 u32 tmp = readl(&ep->cfg->ep_cfg) & 343 (~(0x07 << EP_FIFO_BYTE_COUNT)); 344 writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg); 345 } 346 } 347 348 static inline void start_out_naking(struct net2280_ep *ep) 349 { 350 /* NOTE: hardware races lurk here, and PING protocol issues */ 351 writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); 352 /* synch with device */ 353 readl(&ep->regs->ep_rsp); 354 } 355 356 static inline void stop_out_naking(struct net2280_ep *ep) 357 { 358 u32 tmp; 359 360 tmp = readl(&ep->regs->ep_stat); 361 if ((tmp & BIT(NAK_OUT_PACKETS)) != 0) 362 writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); 363 } 364 365 366 static inline void set_max_speed(struct net2280_ep *ep, u32 max) 367 { 368 u32 reg; 369 static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, 370 0x50, 0x20, 0x70, 0x40, 0x90 }; 371 372 if (ep->dev->enhanced_mode) 373 reg = ep_enhanced[ep->num]; 374 else{ 375 reg = (ep->num + 1) * 0x10; 376 if (ep->dev->gadget.speed != USB_SPEED_HIGH) 377 reg += 1; 378 } 379 380 set_idx_reg(ep->dev->regs, reg, max); 381 } 382 383 #endif /* __KERNEL__ */ 384