xref: /linux/drivers/usb/gadget/udc/mv_u3d.h (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  */
8 
9 #ifndef __MV_U3D_H
10 #define __MV_U3D_H
11 
12 #define MV_U3D_EP_CONTEXT_ALIGNMENT	32
13 #define MV_U3D_TRB_ALIGNMENT	16
14 #define MV_U3D_DMA_BOUNDARY	4096
15 #define MV_U3D_EP0_MAX_PKT_SIZE	512
16 
17 /* ep0 transfer state */
18 #define MV_U3D_WAIT_FOR_SETUP		0
19 #define MV_U3D_DATA_STATE_XMIT		1
20 #define MV_U3D_DATA_STATE_NEED_ZLP	2
21 #define MV_U3D_WAIT_FOR_OUT_STATUS	3
22 #define MV_U3D_DATA_STATE_RECV		4
23 #define MV_U3D_STATUS_STAGE		5
24 
25 #define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
26 
27 /* USB3 Interrupt Status */
28 #define MV_U3D_USBINT_SETUP		0x00000001
29 #define MV_U3D_USBINT_RX_COMPLETE	0x00000002
30 #define MV_U3D_USBINT_TX_COMPLETE	0x00000004
31 #define MV_U3D_USBINT_UNDER_RUN	0x00000008
32 #define MV_U3D_USBINT_RXDESC_ERR	0x00000010
33 #define MV_U3D_USBINT_TXDESC_ERR	0x00000020
34 #define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
35 #define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
36 #define MV_U3D_USBINT_VBUS_VALID	0x00010000
37 #define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
38 #define MV_U3D_USBINT_LINK_CHG		0x01000000
39 
40 /* USB3 Interrupt Enable */
41 #define MV_U3D_INTR_ENABLE_SETUP		0x00000001
42 #define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
43 #define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
44 #define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
45 #define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
46 #define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
47 #define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
48 #define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
49 #define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
50 #define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
51 #define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
52 #define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
53 #define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
54 
55 /* USB3 Link Change */
56 #define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
57 #define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
58 #define MV_U3D_LINK_CHANGE_RESUME		0x00000004
59 #define MV_U3D_LINK_CHANGE_WRESET		0x00000008
60 #define MV_U3D_LINK_CHANGE_HRESET		0x00000010
61 #define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
62 #define MV_U3D_LINK_CHANGE_INACT		0x00000040
63 #define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
64 #define MV_U3D_LINK_CHANGE_U1			0x00000100
65 #define MV_U3D_LINK_CHANGE_U2			0x00000200
66 #define MV_U3D_LINK_CHANGE_U3			0x00000400
67 
68 /* bridge setting */
69 #define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
70 
71 /* Command Register Bit Masks */
72 #define MV_U3D_CMD_RUN_STOP		0x00000001
73 #define MV_U3D_CMD_CTRL_RESET		0x00000002
74 
75 /* ep control register */
76 #define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
77 #define MV_U3D_EPXCR_EP_TYPE_ISOC		1
78 #define MV_U3D_EPXCR_EP_TYPE_BULK		2
79 #define MV_U3D_EPXCR_EP_TYPE_INT		3
80 #define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
81 #define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
82 #define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
83 #define MV_U3D_USB_BULK_BURST_OUT		6
84 #define MV_U3D_USB_BULK_BURST_IN		14
85 
86 #define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
87 #define MV_U3D_EPXCR_EP_HALT		(1 << 1)
88 #define MV_U3D_EPXCR_EP_INIT		(1)
89 
90 /* TX/RX Status Register */
91 #define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
92 #define MV_U3D_COMPLETE_INVALID	0
93 #define MV_U3D_COMPLETE_SUCCESS	1
94 #define MV_U3D_COMPLETE_BUFF_ERR	2
95 #define MV_U3D_COMPLETE_SHORT_PACKET	3
96 #define MV_U3D_COMPLETE_TRB_ERR	5
97 #define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
98 
99 #define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
100 
101 #define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
102 #define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
103 
104 #define MV_U3D_USB3_OP_REGS_OFFSET	0x100
105 #define MV_U3D_USB3_PHY_OFFSET		0xB800
106 
107 #define DCS_ENABLE	0x1
108 
109 /* timeout */
110 #define MV_U3D_RESET_TIMEOUT		10000
111 #define MV_U3D_FLUSH_TIMEOUT		100000
112 #define MV_U3D_OWN_TIMEOUT		10000
113 #define LOOPS_USEC_SHIFT	4
114 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
115 #define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
116 
117 /* ep direction */
118 #define MV_U3D_EP_DIR_IN		1
119 #define MV_U3D_EP_DIR_OUT		0
120 #define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
121 				((ep)->u3d->ep0_dir) : ((ep)->direction))
122 
123 /* usb capability registers */
124 struct mv_u3d_cap_regs {
125 	u32	rsvd[5];
126 	u32	dboff;	/* doorbell register offset */
127 	u32	rtsoff;	/* runtime register offset */
128 	u32	vuoff;	/* vendor unique register offset */
129 };
130 
131 /* operation registers */
132 struct mv_u3d_op_regs {
133 	u32	usbcmd;		/* Command register */
134 	u32	rsvd1[11];
135 	u32	dcbaapl;	/* Device Context Base Address low register */
136 	u32	dcbaaph;	/* Device Context Base Address high register */
137 	u32	rsvd2[243];
138 	u32	portsc;		/* port status and control register*/
139 	u32	portlinkinfo;	/* port link info register*/
140 	u32	rsvd3[9917];
141 	u32	doorbell;	/* doorbell register */
142 };
143 
144 /* control enpoint enable registers */
145 struct epxcr {
146 	u32	epxoutcr0;	/* ep out control 0 register */
147 	u32	epxoutcr1;	/* ep out control 1 register */
148 	u32	epxincr0;	/* ep in control 0 register */
149 	u32	epxincr1;	/* ep in control 1 register */
150 };
151 
152 /* transfer status registers */
153 struct xferstatus {
154 	u32	curdeqlo;	/* current TRB pointer low */
155 	u32	curdeqhi;	/* current TRB pointer high */
156 	u32	statuslo;	/* transfer status low */
157 	u32	statushi;	/* transfer status high */
158 };
159 
160 /* vendor unique control registers */
161 struct mv_u3d_vuc_regs {
162 	u32	ctrlepenable;	/* control endpoint enable register */
163 	u32	setuplock;	/* setup lock register */
164 	u32	endcomplete;	/* endpoint transfer complete register */
165 	u32	intrcause;	/* interrupt cause register */
166 	u32	intrenable;	/* interrupt enable register */
167 	u32	trbcomplete;	/* TRB complete register */
168 	u32	linkchange;	/* link change register */
169 	u32	rsvd1[5];
170 	u32	trbunderrun;	/* TRB underrun register */
171 	u32	rsvd2[43];
172 	u32	bridgesetting;	/* bridge setting register */
173 	u32	rsvd3[7];
174 	struct xferstatus	txst[16];	/* TX status register */
175 	struct xferstatus	rxst[16];	/* RX status register */
176 	u32	ltssm;		/* LTSSM control register */
177 	u32	pipe;		/* PIPE control register */
178 	u32	linkcr0;	/* link control 0 register */
179 	u32	linkcr1;	/* link control 1 register */
180 	u32	rsvd6[60];
181 	u32	mib0;		/* MIB0 counter register */
182 	u32	usblink;	/* usb link control register */
183 	u32	ltssmstate;	/* LTSSM state register */
184 	u32	linkerrorcause;	/* link error cause register */
185 	u32	rsvd7[60];
186 	u32	devaddrtiebrkr;	/* device address and tie breaker */
187 	u32	itpinfo0;	/* ITP info 0 register */
188 	u32	itpinfo1;	/* ITP info 1 register */
189 	u32	rsvd8[61];
190 	struct epxcr	epcr[16];	/* ep control register */
191 	u32	rsvd9[64];
192 	u32	phyaddr;	/* PHY address register */
193 	u32	phydata;	/* PHY data register */
194 };
195 
196 /* Endpoint context structure */
197 struct mv_u3d_ep_context {
198 	u32	rsvd0;
199 	u32	rsvd1;
200 	u32	trb_addr_lo;		/* TRB address low 32 bit */
201 	u32	trb_addr_hi;		/* TRB address high 32 bit */
202 	u32	rsvd2;
203 	u32	rsvd3;
204 	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
205 };
206 
207 /* TRB control data structure */
208 struct mv_u3d_trb_ctrl {
209 	u32	own:1;		/* owner of TRB */
210 	u32	rsvd1:3;
211 	u32	chain:1;	/* associate this TRB with the
212 				next TRB on the Ring */
213 	u32	ioc:1;		/* interrupt on complete */
214 	u32	rsvd2:4;
215 	u32	type:6;		/* TRB type */
216 #define TYPE_NORMAL	1
217 #define TYPE_DATA	3
218 #define TYPE_LINK	6
219 	u32	dir:1;		/* Working at data stage of control endpoint
220 				operation. 0 is OUT and 1 is IN. */
221 	u32	rsvd3:15;
222 };
223 
224 /* TRB data structure
225  * For multiple TRB, all the TRBs' physical address should be continuous.
226  */
227 struct mv_u3d_trb_hw {
228 	u32	buf_addr_lo;	/* data buffer address low 32 bit */
229 	u32	buf_addr_hi;	/* data buffer address high 32 bit */
230 	u32	trb_len;	/* transfer length */
231 	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
232 };
233 
234 /* TRB structure */
235 struct mv_u3d_trb {
236 	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
237 	dma_addr_t trb_dma;		/* dma address for this trb_hw */
238 	struct list_head trb_list;	/* trb list */
239 };
240 
241 /* device data structure */
242 struct mv_u3d {
243 	struct usb_gadget		gadget;
244 	struct usb_gadget_driver	*driver;
245 	spinlock_t			lock;	/* device lock */
246 	struct completion		*done;
247 	struct device			*dev;
248 	int				irq;
249 
250 	/* usb controller registers */
251 	struct mv_u3d_cap_regs __iomem	*cap_regs;
252 	struct mv_u3d_op_regs __iomem	*op_regs;
253 	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
254 	void __iomem			*phy_regs;
255 
256 	unsigned int			max_eps;
257 	struct mv_u3d_ep_context	*ep_context;
258 	size_t				ep_context_size;
259 	dma_addr_t			ep_context_dma;
260 
261 	struct dma_pool			*trb_pool; /* for TRB data structure */
262 	struct mv_u3d_ep		*eps;
263 
264 	struct mv_u3d_req		*status_req; /* ep0 status request */
265 	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
266 
267 	unsigned int		resume_state;	/* USB state to resume */
268 	unsigned int		usb_state;	/* USB current state */
269 	unsigned int		ep0_state;	/* Endpoint zero state */
270 	unsigned int		ep0_dir;
271 
272 	unsigned int		dev_addr;	/* device address */
273 
274 	unsigned int		errors;
275 
276 	unsigned		softconnect:1;
277 	unsigned		vbus_active:1;	/* vbus is active or not */
278 	unsigned		remote_wakeup:1; /* support remote wakeup */
279 	unsigned		clock_gating:1;	/* clock gating or not */
280 	unsigned		active:1;	/* udc is active or not */
281 	unsigned		vbus_valid_detect:1; /* udc vbus detection */
282 
283 	struct mv_usb_addon_irq *vbus;
284 	unsigned int		power;
285 
286 	struct clk		*clk;
287 };
288 
289 /* endpoint data structure */
290 struct mv_u3d_ep {
291 	struct usb_ep		ep;
292 	struct mv_u3d		*u3d;
293 	struct list_head	queue;	/* ep request queued hardware */
294 	struct list_head	req_list; /* list of ep request */
295 	struct mv_u3d_ep_context	*ep_context; /* ep context */
296 	u32			direction;
297 	char			name[14];
298 	u32			processing; /* there is ep request
299 						queued on haredware */
300 	spinlock_t		req_lock; /* ep lock */
301 	unsigned		wedge:1;
302 	unsigned		enabled:1;
303 	unsigned		ep_type:2;
304 	unsigned		ep_num:8;
305 };
306 
307 /* request data structure */
308 struct mv_u3d_req {
309 	struct usb_request	req;
310 	struct mv_u3d_ep	*ep;
311 	struct list_head	queue;	/* ep requst queued on hardware */
312 	struct list_head	list;	/* ep request list */
313 	struct list_head	trb_list; /* trb list of a request */
314 
315 	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
316 	unsigned		trb_count; /* TRB number in the chain */
317 	unsigned		chain;	   /* TRB chain or not */
318 };
319 
320 #endif
321