1 /* 2 * driver/usb/gadget/fsl_qe_udc.c 3 * 4 * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. All rights reserved. 5 * 6 * Xie Xiaobo <X.Xie@freescale.com> 7 * Li Yang <leoli@freescale.com> 8 * Based on bareboard code from Shlomi Gridish. 9 * 10 * Description: 11 * Freescle QE/CPM USB Pheripheral Controller Driver 12 * The controller can be found on MPC8360, MPC8272, and etc. 13 * MPC8360 Rev 1.1 may need QE mircocode update 14 * 15 * This program is free software; you can redistribute it and/or modify it 16 * under the terms of the GNU General Public License as published by the 17 * Free Software Foundation; either version 2 of the License, or (at your 18 * option) any later version. 19 */ 20 21 #undef USB_TRACE 22 23 #include <linux/module.h> 24 #include <linux/kernel.h> 25 #include <linux/ioport.h> 26 #include <linux/types.h> 27 #include <linux/errno.h> 28 #include <linux/err.h> 29 #include <linux/slab.h> 30 #include <linux/list.h> 31 #include <linux/interrupt.h> 32 #include <linux/io.h> 33 #include <linux/moduleparam.h> 34 #include <linux/of_address.h> 35 #include <linux/of_irq.h> 36 #include <linux/of_platform.h> 37 #include <linux/dma-mapping.h> 38 #include <linux/usb/ch9.h> 39 #include <linux/usb/gadget.h> 40 #include <linux/usb/otg.h> 41 #include <asm/qe.h> 42 #include <asm/cpm.h> 43 #include <asm/dma.h> 44 #include <asm/reg.h> 45 #include "fsl_qe_udc.h" 46 47 #define DRIVER_DESC "Freescale QE/CPM USB Device Controller driver" 48 #define DRIVER_AUTHOR "Xie XiaoBo" 49 #define DRIVER_VERSION "1.0" 50 51 #define DMA_ADDR_INVALID (~(dma_addr_t)0) 52 53 static const char driver_name[] = "fsl_qe_udc"; 54 static const char driver_desc[] = DRIVER_DESC; 55 56 /*ep name is important in gadget, it should obey the convention of ep_match()*/ 57 static const char *const ep_name[] = { 58 "ep0-control", /* everyone has ep0 */ 59 /* 3 configurable endpoints */ 60 "ep1", 61 "ep2", 62 "ep3", 63 }; 64 65 static struct usb_endpoint_descriptor qe_ep0_desc = { 66 .bLength = USB_DT_ENDPOINT_SIZE, 67 .bDescriptorType = USB_DT_ENDPOINT, 68 69 .bEndpointAddress = 0, 70 .bmAttributes = USB_ENDPOINT_XFER_CONTROL, 71 .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, 72 }; 73 74 /******************************************************************** 75 * Internal Used Function Start 76 ********************************************************************/ 77 /*----------------------------------------------------------------- 78 * done() - retire a request; caller blocked irqs 79 *--------------------------------------------------------------*/ 80 static void done(struct qe_ep *ep, struct qe_req *req, int status) 81 { 82 struct qe_udc *udc = ep->udc; 83 unsigned char stopped = ep->stopped; 84 85 /* the req->queue pointer is used by ep_queue() func, in which 86 * the request will be added into a udc_ep->queue 'd tail 87 * so here the req will be dropped from the ep->queue 88 */ 89 list_del_init(&req->queue); 90 91 /* req.status should be set as -EINPROGRESS in ep_queue() */ 92 if (req->req.status == -EINPROGRESS) 93 req->req.status = status; 94 else 95 status = req->req.status; 96 97 if (req->mapped) { 98 dma_unmap_single(udc->gadget.dev.parent, 99 req->req.dma, req->req.length, 100 ep_is_in(ep) 101 ? DMA_TO_DEVICE 102 : DMA_FROM_DEVICE); 103 req->req.dma = DMA_ADDR_INVALID; 104 req->mapped = 0; 105 } else 106 dma_sync_single_for_cpu(udc->gadget.dev.parent, 107 req->req.dma, req->req.length, 108 ep_is_in(ep) 109 ? DMA_TO_DEVICE 110 : DMA_FROM_DEVICE); 111 112 if (status && (status != -ESHUTDOWN)) 113 dev_vdbg(udc->dev, "complete %s req %p stat %d len %u/%u\n", 114 ep->ep.name, &req->req, status, 115 req->req.actual, req->req.length); 116 117 /* don't modify queue heads during completion callback */ 118 ep->stopped = 1; 119 spin_unlock(&udc->lock); 120 121 usb_gadget_giveback_request(&ep->ep, &req->req); 122 123 spin_lock(&udc->lock); 124 125 ep->stopped = stopped; 126 } 127 128 /*----------------------------------------------------------------- 129 * nuke(): delete all requests related to this ep 130 *--------------------------------------------------------------*/ 131 static void nuke(struct qe_ep *ep, int status) 132 { 133 /* Whether this eq has request linked */ 134 while (!list_empty(&ep->queue)) { 135 struct qe_req *req = NULL; 136 req = list_entry(ep->queue.next, struct qe_req, queue); 137 138 done(ep, req, status); 139 } 140 } 141 142 /*---------------------------------------------------------------------------* 143 * USB and Endpoint manipulate process, include parameter and register * 144 *---------------------------------------------------------------------------*/ 145 /* @value: 1--set stall 0--clean stall */ 146 static int qe_eprx_stall_change(struct qe_ep *ep, int value) 147 { 148 u16 tem_usep; 149 u8 epnum = ep->epnum; 150 struct qe_udc *udc = ep->udc; 151 152 tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]); 153 tem_usep = tem_usep & ~USB_RHS_MASK; 154 if (value == 1) 155 tem_usep |= USB_RHS_STALL; 156 else if (ep->dir == USB_DIR_IN) 157 tem_usep |= USB_RHS_IGNORE_OUT; 158 159 out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep); 160 return 0; 161 } 162 163 static int qe_eptx_stall_change(struct qe_ep *ep, int value) 164 { 165 u16 tem_usep; 166 u8 epnum = ep->epnum; 167 struct qe_udc *udc = ep->udc; 168 169 tem_usep = in_be16(&udc->usb_regs->usb_usep[epnum]); 170 tem_usep = tem_usep & ~USB_THS_MASK; 171 if (value == 1) 172 tem_usep |= USB_THS_STALL; 173 else if (ep->dir == USB_DIR_OUT) 174 tem_usep |= USB_THS_IGNORE_IN; 175 176 out_be16(&udc->usb_regs->usb_usep[epnum], tem_usep); 177 178 return 0; 179 } 180 181 static int qe_ep0_stall(struct qe_udc *udc) 182 { 183 qe_eptx_stall_change(&udc->eps[0], 1); 184 qe_eprx_stall_change(&udc->eps[0], 1); 185 udc->ep0_state = WAIT_FOR_SETUP; 186 udc->ep0_dir = 0; 187 return 0; 188 } 189 190 static int qe_eprx_nack(struct qe_ep *ep) 191 { 192 u8 epnum = ep->epnum; 193 struct qe_udc *udc = ep->udc; 194 195 if (ep->state == EP_STATE_IDLE) { 196 /* Set the ep's nack */ 197 clrsetbits_be16(&udc->usb_regs->usb_usep[epnum], 198 USB_RHS_MASK, USB_RHS_NACK); 199 200 /* Mask Rx and Busy interrupts */ 201 clrbits16(&udc->usb_regs->usb_usbmr, 202 (USB_E_RXB_MASK | USB_E_BSY_MASK)); 203 204 ep->state = EP_STATE_NACK; 205 } 206 return 0; 207 } 208 209 static int qe_eprx_normal(struct qe_ep *ep) 210 { 211 struct qe_udc *udc = ep->udc; 212 213 if (ep->state == EP_STATE_NACK) { 214 clrsetbits_be16(&udc->usb_regs->usb_usep[ep->epnum], 215 USB_RTHS_MASK, USB_THS_IGNORE_IN); 216 217 /* Unmask RX interrupts */ 218 out_be16(&udc->usb_regs->usb_usber, 219 USB_E_BSY_MASK | USB_E_RXB_MASK); 220 setbits16(&udc->usb_regs->usb_usbmr, 221 (USB_E_RXB_MASK | USB_E_BSY_MASK)); 222 223 ep->state = EP_STATE_IDLE; 224 ep->has_data = 0; 225 } 226 227 return 0; 228 } 229 230 static int qe_ep_cmd_stoptx(struct qe_ep *ep) 231 { 232 if (ep->udc->soc_type == PORT_CPM) 233 cpm_command(CPM_USB_STOP_TX | (ep->epnum << CPM_USB_EP_SHIFT), 234 CPM_USB_STOP_TX_OPCODE); 235 else 236 qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, 237 ep->epnum, 0); 238 239 return 0; 240 } 241 242 static int qe_ep_cmd_restarttx(struct qe_ep *ep) 243 { 244 if (ep->udc->soc_type == PORT_CPM) 245 cpm_command(CPM_USB_RESTART_TX | (ep->epnum << 246 CPM_USB_EP_SHIFT), CPM_USB_RESTART_TX_OPCODE); 247 else 248 qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, 249 ep->epnum, 0); 250 251 return 0; 252 } 253 254 static int qe_ep_flushtxfifo(struct qe_ep *ep) 255 { 256 struct qe_udc *udc = ep->udc; 257 int i; 258 259 i = (int)ep->epnum; 260 261 qe_ep_cmd_stoptx(ep); 262 out_8(&udc->usb_regs->usb_uscom, 263 USB_CMD_FLUSH_FIFO | (USB_CMD_EP_MASK & (ep->epnum))); 264 out_be16(&udc->ep_param[i]->tbptr, in_be16(&udc->ep_param[i]->tbase)); 265 out_be32(&udc->ep_param[i]->tstate, 0); 266 out_be16(&udc->ep_param[i]->tbcnt, 0); 267 268 ep->c_txbd = ep->txbase; 269 ep->n_txbd = ep->txbase; 270 qe_ep_cmd_restarttx(ep); 271 return 0; 272 } 273 274 static int qe_ep_filltxfifo(struct qe_ep *ep) 275 { 276 struct qe_udc *udc = ep->udc; 277 278 out_8(&udc->usb_regs->usb_uscom, 279 USB_CMD_STR_FIFO | (USB_CMD_EP_MASK & (ep->epnum))); 280 return 0; 281 } 282 283 static int qe_epbds_reset(struct qe_udc *udc, int pipe_num) 284 { 285 struct qe_ep *ep; 286 u32 bdring_len; 287 struct qe_bd __iomem *bd; 288 int i; 289 290 ep = &udc->eps[pipe_num]; 291 292 if (ep->dir == USB_DIR_OUT) 293 bdring_len = USB_BDRING_LEN_RX; 294 else 295 bdring_len = USB_BDRING_LEN; 296 297 bd = ep->rxbase; 298 for (i = 0; i < (bdring_len - 1); i++) { 299 out_be32((u32 __iomem *)bd, R_E | R_I); 300 bd++; 301 } 302 out_be32((u32 __iomem *)bd, R_E | R_I | R_W); 303 304 bd = ep->txbase; 305 for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) { 306 out_be32(&bd->buf, 0); 307 out_be32((u32 __iomem *)bd, 0); 308 bd++; 309 } 310 out_be32((u32 __iomem *)bd, T_W); 311 312 return 0; 313 } 314 315 static int qe_ep_reset(struct qe_udc *udc, int pipe_num) 316 { 317 struct qe_ep *ep; 318 u16 tmpusep; 319 320 ep = &udc->eps[pipe_num]; 321 tmpusep = in_be16(&udc->usb_regs->usb_usep[pipe_num]); 322 tmpusep &= ~USB_RTHS_MASK; 323 324 switch (ep->dir) { 325 case USB_DIR_BOTH: 326 qe_ep_flushtxfifo(ep); 327 break; 328 case USB_DIR_OUT: 329 tmpusep |= USB_THS_IGNORE_IN; 330 break; 331 case USB_DIR_IN: 332 qe_ep_flushtxfifo(ep); 333 tmpusep |= USB_RHS_IGNORE_OUT; 334 break; 335 default: 336 break; 337 } 338 out_be16(&udc->usb_regs->usb_usep[pipe_num], tmpusep); 339 340 qe_epbds_reset(udc, pipe_num); 341 342 return 0; 343 } 344 345 static int qe_ep_toggledata01(struct qe_ep *ep) 346 { 347 ep->data01 ^= 0x1; 348 return 0; 349 } 350 351 static int qe_ep_bd_init(struct qe_udc *udc, unsigned char pipe_num) 352 { 353 struct qe_ep *ep = &udc->eps[pipe_num]; 354 unsigned long tmp_addr = 0; 355 struct usb_ep_para __iomem *epparam; 356 int i; 357 struct qe_bd __iomem *bd; 358 int bdring_len; 359 360 if (ep->dir == USB_DIR_OUT) 361 bdring_len = USB_BDRING_LEN_RX; 362 else 363 bdring_len = USB_BDRING_LEN; 364 365 epparam = udc->ep_param[pipe_num]; 366 /* alloc multi-ram for BD rings and set the ep parameters */ 367 tmp_addr = cpm_muram_alloc(sizeof(struct qe_bd) * (bdring_len + 368 USB_BDRING_LEN_TX), QE_ALIGNMENT_OF_BD); 369 if (IS_ERR_VALUE(tmp_addr)) 370 return -ENOMEM; 371 372 out_be16(&epparam->rbase, (u16)tmp_addr); 373 out_be16(&epparam->tbase, (u16)(tmp_addr + 374 (sizeof(struct qe_bd) * bdring_len))); 375 376 out_be16(&epparam->rbptr, in_be16(&epparam->rbase)); 377 out_be16(&epparam->tbptr, in_be16(&epparam->tbase)); 378 379 ep->rxbase = cpm_muram_addr(tmp_addr); 380 ep->txbase = cpm_muram_addr(tmp_addr + (sizeof(struct qe_bd) 381 * bdring_len)); 382 ep->n_rxbd = ep->rxbase; 383 ep->e_rxbd = ep->rxbase; 384 ep->n_txbd = ep->txbase; 385 ep->c_txbd = ep->txbase; 386 ep->data01 = 0; /* data0 */ 387 388 /* Init TX and RX bds */ 389 bd = ep->rxbase; 390 for (i = 0; i < bdring_len - 1; i++) { 391 out_be32(&bd->buf, 0); 392 out_be32((u32 __iomem *)bd, 0); 393 bd++; 394 } 395 out_be32(&bd->buf, 0); 396 out_be32((u32 __iomem *)bd, R_W); 397 398 bd = ep->txbase; 399 for (i = 0; i < USB_BDRING_LEN_TX - 1; i++) { 400 out_be32(&bd->buf, 0); 401 out_be32((u32 __iomem *)bd, 0); 402 bd++; 403 } 404 out_be32(&bd->buf, 0); 405 out_be32((u32 __iomem *)bd, T_W); 406 407 return 0; 408 } 409 410 static int qe_ep_rxbd_update(struct qe_ep *ep) 411 { 412 unsigned int size; 413 int i; 414 unsigned int tmp; 415 struct qe_bd __iomem *bd; 416 unsigned int bdring_len; 417 418 if (ep->rxbase == NULL) 419 return -EINVAL; 420 421 bd = ep->rxbase; 422 423 ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC); 424 if (ep->rxframe == NULL) { 425 dev_err(ep->udc->dev, "malloc rxframe failed\n"); 426 return -ENOMEM; 427 } 428 429 qe_frame_init(ep->rxframe); 430 431 if (ep->dir == USB_DIR_OUT) 432 bdring_len = USB_BDRING_LEN_RX; 433 else 434 bdring_len = USB_BDRING_LEN; 435 436 size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1); 437 ep->rxbuffer = kzalloc(size, GFP_ATOMIC); 438 if (ep->rxbuffer == NULL) { 439 dev_err(ep->udc->dev, "malloc rxbuffer failed,size=%d\n", 440 size); 441 kfree(ep->rxframe); 442 return -ENOMEM; 443 } 444 445 ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer); 446 if (ep->rxbuf_d == DMA_ADDR_INVALID) { 447 ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent, 448 ep->rxbuffer, 449 size, 450 DMA_FROM_DEVICE); 451 ep->rxbufmap = 1; 452 } else { 453 dma_sync_single_for_device(ep->udc->gadget.dev.parent, 454 ep->rxbuf_d, size, 455 DMA_FROM_DEVICE); 456 ep->rxbufmap = 0; 457 } 458 459 size = ep->ep.maxpacket + USB_CRC_SIZE + 2; 460 tmp = ep->rxbuf_d; 461 tmp = (u32)(((tmp >> 2) << 2) + 4); 462 463 for (i = 0; i < bdring_len - 1; i++) { 464 out_be32(&bd->buf, tmp); 465 out_be32((u32 __iomem *)bd, (R_E | R_I)); 466 tmp = tmp + size; 467 bd++; 468 } 469 out_be32(&bd->buf, tmp); 470 out_be32((u32 __iomem *)bd, (R_E | R_I | R_W)); 471 472 return 0; 473 } 474 475 static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num) 476 { 477 struct qe_ep *ep = &udc->eps[pipe_num]; 478 struct usb_ep_para __iomem *epparam; 479 u16 usep, logepnum; 480 u16 tmp; 481 u8 rtfcr = 0; 482 483 epparam = udc->ep_param[pipe_num]; 484 485 usep = 0; 486 logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); 487 usep |= (logepnum << USB_EPNUM_SHIFT); 488 489 switch (ep->ep.desc->bmAttributes & 0x03) { 490 case USB_ENDPOINT_XFER_BULK: 491 usep |= USB_TRANS_BULK; 492 break; 493 case USB_ENDPOINT_XFER_ISOC: 494 usep |= USB_TRANS_ISO; 495 break; 496 case USB_ENDPOINT_XFER_INT: 497 usep |= USB_TRANS_INT; 498 break; 499 default: 500 usep |= USB_TRANS_CTR; 501 break; 502 } 503 504 switch (ep->dir) { 505 case USB_DIR_OUT: 506 usep |= USB_THS_IGNORE_IN; 507 break; 508 case USB_DIR_IN: 509 usep |= USB_RHS_IGNORE_OUT; 510 break; 511 default: 512 break; 513 } 514 out_be16(&udc->usb_regs->usb_usep[pipe_num], usep); 515 516 rtfcr = 0x30; 517 out_8(&epparam->rbmr, rtfcr); 518 out_8(&epparam->tbmr, rtfcr); 519 520 tmp = (u16)(ep->ep.maxpacket + USB_CRC_SIZE); 521 /* MRBLR must be divisble by 4 */ 522 tmp = (u16)(((tmp >> 2) << 2) + 4); 523 out_be16(&epparam->mrblr, tmp); 524 525 return 0; 526 } 527 528 static int qe_ep_init(struct qe_udc *udc, 529 unsigned char pipe_num, 530 const struct usb_endpoint_descriptor *desc) 531 { 532 struct qe_ep *ep = &udc->eps[pipe_num]; 533 unsigned long flags; 534 int reval = 0; 535 u16 max = 0; 536 537 max = usb_endpoint_maxp(desc); 538 539 /* check the max package size validate for this endpoint */ 540 /* Refer to USB2.0 spec table 9-13, 541 */ 542 if (pipe_num != 0) { 543 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { 544 case USB_ENDPOINT_XFER_BULK: 545 if (strstr(ep->ep.name, "-iso") 546 || strstr(ep->ep.name, "-int")) 547 goto en_done; 548 switch (udc->gadget.speed) { 549 case USB_SPEED_HIGH: 550 if ((max == 128) || (max == 256) || (max == 512)) 551 break; 552 default: 553 switch (max) { 554 case 4: 555 case 8: 556 case 16: 557 case 32: 558 case 64: 559 break; 560 default: 561 case USB_SPEED_LOW: 562 goto en_done; 563 } 564 } 565 break; 566 case USB_ENDPOINT_XFER_INT: 567 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ 568 goto en_done; 569 switch (udc->gadget.speed) { 570 case USB_SPEED_HIGH: 571 if (max <= 1024) 572 break; 573 case USB_SPEED_FULL: 574 if (max <= 64) 575 break; 576 default: 577 if (max <= 8) 578 break; 579 goto en_done; 580 } 581 break; 582 case USB_ENDPOINT_XFER_ISOC: 583 if (strstr(ep->ep.name, "-bulk") 584 || strstr(ep->ep.name, "-int")) 585 goto en_done; 586 switch (udc->gadget.speed) { 587 case USB_SPEED_HIGH: 588 if (max <= 1024) 589 break; 590 case USB_SPEED_FULL: 591 if (max <= 1023) 592 break; 593 default: 594 goto en_done; 595 } 596 break; 597 case USB_ENDPOINT_XFER_CONTROL: 598 if (strstr(ep->ep.name, "-iso") 599 || strstr(ep->ep.name, "-int")) 600 goto en_done; 601 switch (udc->gadget.speed) { 602 case USB_SPEED_HIGH: 603 case USB_SPEED_FULL: 604 switch (max) { 605 case 1: 606 case 2: 607 case 4: 608 case 8: 609 case 16: 610 case 32: 611 case 64: 612 break; 613 default: 614 goto en_done; 615 } 616 case USB_SPEED_LOW: 617 switch (max) { 618 case 1: 619 case 2: 620 case 4: 621 case 8: 622 break; 623 default: 624 goto en_done; 625 } 626 default: 627 goto en_done; 628 } 629 break; 630 631 default: 632 goto en_done; 633 } 634 } /* if ep0*/ 635 636 spin_lock_irqsave(&udc->lock, flags); 637 638 /* initialize ep structure */ 639 ep->ep.maxpacket = max; 640 ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); 641 ep->ep.desc = desc; 642 ep->stopped = 0; 643 ep->init = 1; 644 645 if (pipe_num == 0) { 646 ep->dir = USB_DIR_BOTH; 647 udc->ep0_dir = USB_DIR_OUT; 648 udc->ep0_state = WAIT_FOR_SETUP; 649 } else { 650 switch (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { 651 case USB_DIR_OUT: 652 ep->dir = USB_DIR_OUT; 653 break; 654 case USB_DIR_IN: 655 ep->dir = USB_DIR_IN; 656 default: 657 break; 658 } 659 } 660 661 /* hardware special operation */ 662 qe_ep_bd_init(udc, pipe_num); 663 if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_OUT)) { 664 reval = qe_ep_rxbd_update(ep); 665 if (reval) 666 goto en_done1; 667 } 668 669 if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) { 670 ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC); 671 if (ep->txframe == NULL) { 672 dev_err(udc->dev, "malloc txframe failed\n"); 673 goto en_done2; 674 } 675 qe_frame_init(ep->txframe); 676 } 677 678 qe_ep_register_init(udc, pipe_num); 679 680 /* Now HW will be NAKing transfers to that EP, 681 * until a buffer is queued to it. */ 682 spin_unlock_irqrestore(&udc->lock, flags); 683 684 return 0; 685 en_done2: 686 kfree(ep->rxbuffer); 687 kfree(ep->rxframe); 688 en_done1: 689 spin_unlock_irqrestore(&udc->lock, flags); 690 en_done: 691 dev_err(udc->dev, "failed to initialize %s\n", ep->ep.name); 692 return -ENODEV; 693 } 694 695 static inline void qe_usb_enable(struct qe_udc *udc) 696 { 697 setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); 698 } 699 700 static inline void qe_usb_disable(struct qe_udc *udc) 701 { 702 clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN); 703 } 704 705 /*----------------------------------------------------------------------------* 706 * USB and EP basic manipulate function end * 707 *----------------------------------------------------------------------------*/ 708 709 710 /****************************************************************************** 711 UDC transmit and receive process 712 ******************************************************************************/ 713 static void recycle_one_rxbd(struct qe_ep *ep) 714 { 715 u32 bdstatus; 716 717 bdstatus = in_be32((u32 __iomem *)ep->e_rxbd); 718 bdstatus = R_I | R_E | (bdstatus & R_W); 719 out_be32((u32 __iomem *)ep->e_rxbd, bdstatus); 720 721 if (bdstatus & R_W) 722 ep->e_rxbd = ep->rxbase; 723 else 724 ep->e_rxbd++; 725 } 726 727 static void recycle_rxbds(struct qe_ep *ep, unsigned char stopatnext) 728 { 729 u32 bdstatus; 730 struct qe_bd __iomem *bd, *nextbd; 731 unsigned char stop = 0; 732 733 nextbd = ep->n_rxbd; 734 bd = ep->e_rxbd; 735 bdstatus = in_be32((u32 __iomem *)bd); 736 737 while (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK) && !stop) { 738 bdstatus = R_E | R_I | (bdstatus & R_W); 739 out_be32((u32 __iomem *)bd, bdstatus); 740 741 if (bdstatus & R_W) 742 bd = ep->rxbase; 743 else 744 bd++; 745 746 bdstatus = in_be32((u32 __iomem *)bd); 747 if (stopatnext && (bd == nextbd)) 748 stop = 1; 749 } 750 751 ep->e_rxbd = bd; 752 } 753 754 static void ep_recycle_rxbds(struct qe_ep *ep) 755 { 756 struct qe_bd __iomem *bd = ep->n_rxbd; 757 u32 bdstatus; 758 u8 epnum = ep->epnum; 759 struct qe_udc *udc = ep->udc; 760 761 bdstatus = in_be32((u32 __iomem *)bd); 762 if (!(bdstatus & R_E) && !(bdstatus & BD_LENGTH_MASK)) { 763 bd = ep->rxbase + 764 ((in_be16(&udc->ep_param[epnum]->rbptr) - 765 in_be16(&udc->ep_param[epnum]->rbase)) 766 >> 3); 767 bdstatus = in_be32((u32 __iomem *)bd); 768 769 if (bdstatus & R_W) 770 bd = ep->rxbase; 771 else 772 bd++; 773 774 ep->e_rxbd = bd; 775 recycle_rxbds(ep, 0); 776 ep->e_rxbd = ep->n_rxbd; 777 } else 778 recycle_rxbds(ep, 1); 779 780 if (in_be16(&udc->usb_regs->usb_usber) & USB_E_BSY_MASK) 781 out_be16(&udc->usb_regs->usb_usber, USB_E_BSY_MASK); 782 783 if (ep->has_data <= 0 && (!list_empty(&ep->queue))) 784 qe_eprx_normal(ep); 785 786 ep->localnack = 0; 787 } 788 789 static void setup_received_handle(struct qe_udc *udc, 790 struct usb_ctrlrequest *setup); 791 static int qe_ep_rxframe_handle(struct qe_ep *ep); 792 static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req); 793 /* when BD PID is setup, handle the packet */ 794 static int ep0_setup_handle(struct qe_udc *udc) 795 { 796 struct qe_ep *ep = &udc->eps[0]; 797 struct qe_frame *pframe; 798 unsigned int fsize; 799 u8 *cp; 800 801 pframe = ep->rxframe; 802 if ((frame_get_info(pframe) & PID_SETUP) 803 && (udc->ep0_state == WAIT_FOR_SETUP)) { 804 fsize = frame_get_length(pframe); 805 if (unlikely(fsize != 8)) 806 return -EINVAL; 807 cp = (u8 *)&udc->local_setup_buff; 808 memcpy(cp, pframe->data, fsize); 809 ep->data01 = 1; 810 811 /* handle the usb command base on the usb_ctrlrequest */ 812 setup_received_handle(udc, &udc->local_setup_buff); 813 return 0; 814 } 815 return -EINVAL; 816 } 817 818 static int qe_ep0_rx(struct qe_udc *udc) 819 { 820 struct qe_ep *ep = &udc->eps[0]; 821 struct qe_frame *pframe; 822 struct qe_bd __iomem *bd; 823 u32 bdstatus, length; 824 u32 vaddr; 825 826 pframe = ep->rxframe; 827 828 if (ep->dir == USB_DIR_IN) { 829 dev_err(udc->dev, "ep0 not a control endpoint\n"); 830 return -EINVAL; 831 } 832 833 bd = ep->n_rxbd; 834 bdstatus = in_be32((u32 __iomem *)bd); 835 length = bdstatus & BD_LENGTH_MASK; 836 837 while (!(bdstatus & R_E) && length) { 838 if ((bdstatus & R_F) && (bdstatus & R_L) 839 && !(bdstatus & R_ERROR)) { 840 if (length == USB_CRC_SIZE) { 841 udc->ep0_state = WAIT_FOR_SETUP; 842 dev_vdbg(udc->dev, 843 "receive a ZLP in status phase\n"); 844 } else { 845 qe_frame_clean(pframe); 846 vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); 847 frame_set_data(pframe, (u8 *)vaddr); 848 frame_set_length(pframe, 849 (length - USB_CRC_SIZE)); 850 frame_set_status(pframe, FRAME_OK); 851 switch (bdstatus & R_PID) { 852 case R_PID_SETUP: 853 frame_set_info(pframe, PID_SETUP); 854 break; 855 case R_PID_DATA1: 856 frame_set_info(pframe, PID_DATA1); 857 break; 858 default: 859 frame_set_info(pframe, PID_DATA0); 860 break; 861 } 862 863 if ((bdstatus & R_PID) == R_PID_SETUP) 864 ep0_setup_handle(udc); 865 else 866 qe_ep_rxframe_handle(ep); 867 } 868 } else { 869 dev_err(udc->dev, "The receive frame with error!\n"); 870 } 871 872 /* note: don't clear the rxbd's buffer address */ 873 recycle_one_rxbd(ep); 874 875 /* Get next BD */ 876 if (bdstatus & R_W) 877 bd = ep->rxbase; 878 else 879 bd++; 880 881 bdstatus = in_be32((u32 __iomem *)bd); 882 length = bdstatus & BD_LENGTH_MASK; 883 884 } 885 886 ep->n_rxbd = bd; 887 888 return 0; 889 } 890 891 static int qe_ep_rxframe_handle(struct qe_ep *ep) 892 { 893 struct qe_frame *pframe; 894 u8 framepid = 0; 895 unsigned int fsize; 896 u8 *cp; 897 struct qe_req *req; 898 899 pframe = ep->rxframe; 900 901 if (frame_get_info(pframe) & PID_DATA1) 902 framepid = 0x1; 903 904 if (framepid != ep->data01) { 905 dev_err(ep->udc->dev, "the data01 error!\n"); 906 return -EIO; 907 } 908 909 fsize = frame_get_length(pframe); 910 if (list_empty(&ep->queue)) { 911 dev_err(ep->udc->dev, "the %s have no requeue!\n", ep->name); 912 } else { 913 req = list_entry(ep->queue.next, struct qe_req, queue); 914 915 cp = (u8 *)(req->req.buf) + req->req.actual; 916 if (cp) { 917 memcpy(cp, pframe->data, fsize); 918 req->req.actual += fsize; 919 if ((fsize < ep->ep.maxpacket) || 920 (req->req.actual >= req->req.length)) { 921 if (ep->epnum == 0) 922 ep0_req_complete(ep->udc, req); 923 else 924 done(ep, req, 0); 925 if (list_empty(&ep->queue) && ep->epnum != 0) 926 qe_eprx_nack(ep); 927 } 928 } 929 } 930 931 qe_ep_toggledata01(ep); 932 933 return 0; 934 } 935 936 static void ep_rx_tasklet(unsigned long data) 937 { 938 struct qe_udc *udc = (struct qe_udc *)data; 939 struct qe_ep *ep; 940 struct qe_frame *pframe; 941 struct qe_bd __iomem *bd; 942 unsigned long flags; 943 u32 bdstatus, length; 944 u32 vaddr, i; 945 946 spin_lock_irqsave(&udc->lock, flags); 947 948 for (i = 1; i < USB_MAX_ENDPOINTS; i++) { 949 ep = &udc->eps[i]; 950 951 if (ep->dir == USB_DIR_IN || ep->enable_tasklet == 0) { 952 dev_dbg(udc->dev, 953 "This is a transmit ep or disable tasklet!\n"); 954 continue; 955 } 956 957 pframe = ep->rxframe; 958 bd = ep->n_rxbd; 959 bdstatus = in_be32((u32 __iomem *)bd); 960 length = bdstatus & BD_LENGTH_MASK; 961 962 while (!(bdstatus & R_E) && length) { 963 if (list_empty(&ep->queue)) { 964 qe_eprx_nack(ep); 965 dev_dbg(udc->dev, 966 "The rxep have noreq %d\n", 967 ep->has_data); 968 break; 969 } 970 971 if ((bdstatus & R_F) && (bdstatus & R_L) 972 && !(bdstatus & R_ERROR)) { 973 qe_frame_clean(pframe); 974 vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); 975 frame_set_data(pframe, (u8 *)vaddr); 976 frame_set_length(pframe, 977 (length - USB_CRC_SIZE)); 978 frame_set_status(pframe, FRAME_OK); 979 switch (bdstatus & R_PID) { 980 case R_PID_DATA1: 981 frame_set_info(pframe, PID_DATA1); 982 break; 983 case R_PID_SETUP: 984 frame_set_info(pframe, PID_SETUP); 985 break; 986 default: 987 frame_set_info(pframe, PID_DATA0); 988 break; 989 } 990 /* handle the rx frame */ 991 qe_ep_rxframe_handle(ep); 992 } else { 993 dev_err(udc->dev, 994 "error in received frame\n"); 995 } 996 /* note: don't clear the rxbd's buffer address */ 997 /*clear the length */ 998 out_be32((u32 __iomem *)bd, bdstatus & BD_STATUS_MASK); 999 ep->has_data--; 1000 if (!(ep->localnack)) 1001 recycle_one_rxbd(ep); 1002 1003 /* Get next BD */ 1004 if (bdstatus & R_W) 1005 bd = ep->rxbase; 1006 else 1007 bd++; 1008 1009 bdstatus = in_be32((u32 __iomem *)bd); 1010 length = bdstatus & BD_LENGTH_MASK; 1011 } 1012 1013 ep->n_rxbd = bd; 1014 1015 if (ep->localnack) 1016 ep_recycle_rxbds(ep); 1017 1018 ep->enable_tasklet = 0; 1019 } /* for i=1 */ 1020 1021 spin_unlock_irqrestore(&udc->lock, flags); 1022 } 1023 1024 static int qe_ep_rx(struct qe_ep *ep) 1025 { 1026 struct qe_udc *udc; 1027 struct qe_frame *pframe; 1028 struct qe_bd __iomem *bd; 1029 u16 swoffs, ucoffs, emptybds; 1030 1031 udc = ep->udc; 1032 pframe = ep->rxframe; 1033 1034 if (ep->dir == USB_DIR_IN) { 1035 dev_err(udc->dev, "transmit ep in rx function\n"); 1036 return -EINVAL; 1037 } 1038 1039 bd = ep->n_rxbd; 1040 1041 swoffs = (u16)(bd - ep->rxbase); 1042 ucoffs = (u16)((in_be16(&udc->ep_param[ep->epnum]->rbptr) - 1043 in_be16(&udc->ep_param[ep->epnum]->rbase)) >> 3); 1044 if (swoffs < ucoffs) 1045 emptybds = USB_BDRING_LEN_RX - ucoffs + swoffs; 1046 else 1047 emptybds = swoffs - ucoffs; 1048 1049 if (emptybds < MIN_EMPTY_BDS) { 1050 qe_eprx_nack(ep); 1051 ep->localnack = 1; 1052 dev_vdbg(udc->dev, "%d empty bds, send NACK\n", emptybds); 1053 } 1054 ep->has_data = USB_BDRING_LEN_RX - emptybds; 1055 1056 if (list_empty(&ep->queue)) { 1057 qe_eprx_nack(ep); 1058 dev_vdbg(udc->dev, "The rxep have no req queued with %d BDs\n", 1059 ep->has_data); 1060 return 0; 1061 } 1062 1063 tasklet_schedule(&udc->rx_tasklet); 1064 ep->enable_tasklet = 1; 1065 1066 return 0; 1067 } 1068 1069 /* send data from a frame, no matter what tx_req */ 1070 static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame) 1071 { 1072 struct qe_udc *udc = ep->udc; 1073 struct qe_bd __iomem *bd; 1074 u16 saveusbmr; 1075 u32 bdstatus, pidmask; 1076 u32 paddr; 1077 1078 if (ep->dir == USB_DIR_OUT) { 1079 dev_err(udc->dev, "receive ep passed to tx function\n"); 1080 return -EINVAL; 1081 } 1082 1083 /* Disable the Tx interrupt */ 1084 saveusbmr = in_be16(&udc->usb_regs->usb_usbmr); 1085 out_be16(&udc->usb_regs->usb_usbmr, 1086 saveusbmr & ~(USB_E_TXB_MASK | USB_E_TXE_MASK)); 1087 1088 bd = ep->n_txbd; 1089 bdstatus = in_be32((u32 __iomem *)bd); 1090 1091 if (!(bdstatus & (T_R | BD_LENGTH_MASK))) { 1092 if (frame_get_length(frame) == 0) { 1093 frame_set_data(frame, udc->nullbuf); 1094 frame_set_length(frame, 2); 1095 frame->info |= (ZLP | NO_CRC); 1096 dev_vdbg(udc->dev, "the frame size = 0\n"); 1097 } 1098 paddr = virt_to_phys((void *)frame->data); 1099 out_be32(&bd->buf, paddr); 1100 bdstatus = (bdstatus&T_W); 1101 if (!(frame_get_info(frame) & NO_CRC)) 1102 bdstatus |= T_R | T_I | T_L | T_TC 1103 | frame_get_length(frame); 1104 else 1105 bdstatus |= T_R | T_I | T_L | frame_get_length(frame); 1106 1107 /* if the packet is a ZLP in status phase */ 1108 if ((ep->epnum == 0) && (udc->ep0_state == DATA_STATE_NEED_ZLP)) 1109 ep->data01 = 0x1; 1110 1111 if (ep->data01) { 1112 pidmask = T_PID_DATA1; 1113 frame->info |= PID_DATA1; 1114 } else { 1115 pidmask = T_PID_DATA0; 1116 frame->info |= PID_DATA0; 1117 } 1118 bdstatus |= T_CNF; 1119 bdstatus |= pidmask; 1120 out_be32((u32 __iomem *)bd, bdstatus); 1121 qe_ep_filltxfifo(ep); 1122 1123 /* enable the TX interrupt */ 1124 out_be16(&udc->usb_regs->usb_usbmr, saveusbmr); 1125 1126 qe_ep_toggledata01(ep); 1127 if (bdstatus & T_W) 1128 ep->n_txbd = ep->txbase; 1129 else 1130 ep->n_txbd++; 1131 1132 return 0; 1133 } else { 1134 out_be16(&udc->usb_regs->usb_usbmr, saveusbmr); 1135 dev_vdbg(udc->dev, "The tx bd is not ready!\n"); 1136 return -EBUSY; 1137 } 1138 } 1139 1140 /* when a bd was transmitted, the function can 1141 * handle the tx_req, not include ep0 */ 1142 static int txcomplete(struct qe_ep *ep, unsigned char restart) 1143 { 1144 if (ep->tx_req != NULL) { 1145 struct qe_req *req = ep->tx_req; 1146 unsigned zlp = 0, last_len = 0; 1147 1148 last_len = min_t(unsigned, req->req.length - ep->sent, 1149 ep->ep.maxpacket); 1150 1151 if (!restart) { 1152 int asent = ep->last; 1153 ep->sent += asent; 1154 ep->last -= asent; 1155 } else { 1156 ep->last = 0; 1157 } 1158 1159 /* zlp needed when req->re.zero is set */ 1160 if (req->req.zero) { 1161 if (last_len == 0 || 1162 (req->req.length % ep->ep.maxpacket) != 0) 1163 zlp = 0; 1164 else 1165 zlp = 1; 1166 } else 1167 zlp = 0; 1168 1169 /* a request already were transmitted completely */ 1170 if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) { 1171 done(ep, ep->tx_req, 0); 1172 ep->tx_req = NULL; 1173 ep->last = 0; 1174 ep->sent = 0; 1175 } 1176 } 1177 1178 /* we should gain a new tx_req fot this endpoint */ 1179 if (ep->tx_req == NULL) { 1180 if (!list_empty(&ep->queue)) { 1181 ep->tx_req = list_entry(ep->queue.next, struct qe_req, 1182 queue); 1183 ep->last = 0; 1184 ep->sent = 0; 1185 } 1186 } 1187 1188 return 0; 1189 } 1190 1191 /* give a frame and a tx_req, send some data */ 1192 static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame) 1193 { 1194 unsigned int size; 1195 u8 *buf; 1196 1197 qe_frame_clean(frame); 1198 size = min_t(u32, (ep->tx_req->req.length - ep->sent), 1199 ep->ep.maxpacket); 1200 buf = (u8 *)ep->tx_req->req.buf + ep->sent; 1201 if (buf && size) { 1202 ep->last = size; 1203 ep->tx_req->req.actual += size; 1204 frame_set_data(frame, buf); 1205 frame_set_length(frame, size); 1206 frame_set_status(frame, FRAME_OK); 1207 frame_set_info(frame, 0); 1208 return qe_ep_tx(ep, frame); 1209 } 1210 return -EIO; 1211 } 1212 1213 /* give a frame struct,send a ZLP */ 1214 static int sendnulldata(struct qe_ep *ep, struct qe_frame *frame, uint infor) 1215 { 1216 struct qe_udc *udc = ep->udc; 1217 1218 if (frame == NULL) 1219 return -ENODEV; 1220 1221 qe_frame_clean(frame); 1222 frame_set_data(frame, (u8 *)udc->nullbuf); 1223 frame_set_length(frame, 2); 1224 frame_set_status(frame, FRAME_OK); 1225 frame_set_info(frame, (ZLP | NO_CRC | infor)); 1226 1227 return qe_ep_tx(ep, frame); 1228 } 1229 1230 static int frame_create_tx(struct qe_ep *ep, struct qe_frame *frame) 1231 { 1232 struct qe_req *req = ep->tx_req; 1233 int reval; 1234 1235 if (req == NULL) 1236 return -ENODEV; 1237 1238 if ((req->req.length - ep->sent) > 0) 1239 reval = qe_usb_senddata(ep, frame); 1240 else 1241 reval = sendnulldata(ep, frame, 0); 1242 1243 return reval; 1244 } 1245 1246 /* if direction is DIR_IN, the status is Device->Host 1247 * if direction is DIR_OUT, the status transaction is Device<-Host 1248 * in status phase, udc create a request and gain status */ 1249 static int ep0_prime_status(struct qe_udc *udc, int direction) 1250 { 1251 1252 struct qe_ep *ep = &udc->eps[0]; 1253 1254 if (direction == USB_DIR_IN) { 1255 udc->ep0_state = DATA_STATE_NEED_ZLP; 1256 udc->ep0_dir = USB_DIR_IN; 1257 sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ); 1258 } else { 1259 udc->ep0_dir = USB_DIR_OUT; 1260 udc->ep0_state = WAIT_FOR_OUT_STATUS; 1261 } 1262 1263 return 0; 1264 } 1265 1266 /* a request complete in ep0, whether gadget request or udc request */ 1267 static void ep0_req_complete(struct qe_udc *udc, struct qe_req *req) 1268 { 1269 struct qe_ep *ep = &udc->eps[0]; 1270 /* because usb and ep's status already been set in ch9setaddress() */ 1271 1272 switch (udc->ep0_state) { 1273 case DATA_STATE_XMIT: 1274 done(ep, req, 0); 1275 /* receive status phase */ 1276 if (ep0_prime_status(udc, USB_DIR_OUT)) 1277 qe_ep0_stall(udc); 1278 break; 1279 1280 case DATA_STATE_NEED_ZLP: 1281 done(ep, req, 0); 1282 udc->ep0_state = WAIT_FOR_SETUP; 1283 break; 1284 1285 case DATA_STATE_RECV: 1286 done(ep, req, 0); 1287 /* send status phase */ 1288 if (ep0_prime_status(udc, USB_DIR_IN)) 1289 qe_ep0_stall(udc); 1290 break; 1291 1292 case WAIT_FOR_OUT_STATUS: 1293 done(ep, req, 0); 1294 udc->ep0_state = WAIT_FOR_SETUP; 1295 break; 1296 1297 case WAIT_FOR_SETUP: 1298 dev_vdbg(udc->dev, "Unexpected interrupt\n"); 1299 break; 1300 1301 default: 1302 qe_ep0_stall(udc); 1303 break; 1304 } 1305 } 1306 1307 static int ep0_txcomplete(struct qe_ep *ep, unsigned char restart) 1308 { 1309 struct qe_req *tx_req = NULL; 1310 struct qe_frame *frame = ep->txframe; 1311 1312 if ((frame_get_info(frame) & (ZLP | NO_REQ)) == (ZLP | NO_REQ)) { 1313 if (!restart) 1314 ep->udc->ep0_state = WAIT_FOR_SETUP; 1315 else 1316 sendnulldata(ep, ep->txframe, SETUP_STATUS | NO_REQ); 1317 return 0; 1318 } 1319 1320 tx_req = ep->tx_req; 1321 if (tx_req != NULL) { 1322 if (!restart) { 1323 int asent = ep->last; 1324 ep->sent += asent; 1325 ep->last -= asent; 1326 } else { 1327 ep->last = 0; 1328 } 1329 1330 /* a request already were transmitted completely */ 1331 if ((ep->tx_req->req.length - ep->sent) <= 0) { 1332 ep->tx_req->req.actual = (unsigned int)ep->sent; 1333 ep0_req_complete(ep->udc, ep->tx_req); 1334 ep->tx_req = NULL; 1335 ep->last = 0; 1336 ep->sent = 0; 1337 } 1338 } else { 1339 dev_vdbg(ep->udc->dev, "the ep0_controller have no req\n"); 1340 } 1341 1342 return 0; 1343 } 1344 1345 static int ep0_txframe_handle(struct qe_ep *ep) 1346 { 1347 /* if have error, transmit again */ 1348 if (frame_get_status(ep->txframe) & FRAME_ERROR) { 1349 qe_ep_flushtxfifo(ep); 1350 dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n"); 1351 if (frame_get_info(ep->txframe) & PID_DATA0) 1352 ep->data01 = 0; 1353 else 1354 ep->data01 = 1; 1355 1356 ep0_txcomplete(ep, 1); 1357 } else 1358 ep0_txcomplete(ep, 0); 1359 1360 frame_create_tx(ep, ep->txframe); 1361 return 0; 1362 } 1363 1364 static int qe_ep0_txconf(struct qe_ep *ep) 1365 { 1366 struct qe_bd __iomem *bd; 1367 struct qe_frame *pframe; 1368 u32 bdstatus; 1369 1370 bd = ep->c_txbd; 1371 bdstatus = in_be32((u32 __iomem *)bd); 1372 while (!(bdstatus & T_R) && (bdstatus & ~T_W)) { 1373 pframe = ep->txframe; 1374 1375 /* clear and recycle the BD */ 1376 out_be32((u32 __iomem *)bd, bdstatus & T_W); 1377 out_be32(&bd->buf, 0); 1378 if (bdstatus & T_W) 1379 ep->c_txbd = ep->txbase; 1380 else 1381 ep->c_txbd++; 1382 1383 if (ep->c_txbd == ep->n_txbd) { 1384 if (bdstatus & DEVICE_T_ERROR) { 1385 frame_set_status(pframe, FRAME_ERROR); 1386 if (bdstatus & T_TO) 1387 pframe->status |= TX_ER_TIMEOUT; 1388 if (bdstatus & T_UN) 1389 pframe->status |= TX_ER_UNDERUN; 1390 } 1391 ep0_txframe_handle(ep); 1392 } 1393 1394 bd = ep->c_txbd; 1395 bdstatus = in_be32((u32 __iomem *)bd); 1396 } 1397 1398 return 0; 1399 } 1400 1401 static int ep_txframe_handle(struct qe_ep *ep) 1402 { 1403 if (frame_get_status(ep->txframe) & FRAME_ERROR) { 1404 qe_ep_flushtxfifo(ep); 1405 dev_vdbg(ep->udc->dev, "The EP0 transmit data have error!\n"); 1406 if (frame_get_info(ep->txframe) & PID_DATA0) 1407 ep->data01 = 0; 1408 else 1409 ep->data01 = 1; 1410 1411 txcomplete(ep, 1); 1412 } else 1413 txcomplete(ep, 0); 1414 1415 frame_create_tx(ep, ep->txframe); /* send the data */ 1416 return 0; 1417 } 1418 1419 /* confirm the already trainsmited bd */ 1420 static int qe_ep_txconf(struct qe_ep *ep) 1421 { 1422 struct qe_bd __iomem *bd; 1423 struct qe_frame *pframe = NULL; 1424 u32 bdstatus; 1425 unsigned char breakonrxinterrupt = 0; 1426 1427 bd = ep->c_txbd; 1428 bdstatus = in_be32((u32 __iomem *)bd); 1429 while (!(bdstatus & T_R) && (bdstatus & ~T_W)) { 1430 pframe = ep->txframe; 1431 if (bdstatus & DEVICE_T_ERROR) { 1432 frame_set_status(pframe, FRAME_ERROR); 1433 if (bdstatus & T_TO) 1434 pframe->status |= TX_ER_TIMEOUT; 1435 if (bdstatus & T_UN) 1436 pframe->status |= TX_ER_UNDERUN; 1437 } 1438 1439 /* clear and recycle the BD */ 1440 out_be32((u32 __iomem *)bd, bdstatus & T_W); 1441 out_be32(&bd->buf, 0); 1442 if (bdstatus & T_W) 1443 ep->c_txbd = ep->txbase; 1444 else 1445 ep->c_txbd++; 1446 1447 /* handle the tx frame */ 1448 ep_txframe_handle(ep); 1449 bd = ep->c_txbd; 1450 bdstatus = in_be32((u32 __iomem *)bd); 1451 } 1452 if (breakonrxinterrupt) 1453 return -EIO; 1454 else 1455 return 0; 1456 } 1457 1458 /* Add a request in queue, and try to transmit a packet */ 1459 static int ep_req_send(struct qe_ep *ep, struct qe_req *req) 1460 { 1461 int reval = 0; 1462 1463 if (ep->tx_req == NULL) { 1464 ep->sent = 0; 1465 ep->last = 0; 1466 txcomplete(ep, 0); /* can gain a new tx_req */ 1467 reval = frame_create_tx(ep, ep->txframe); 1468 } 1469 return reval; 1470 } 1471 1472 /* Maybe this is a good ideal */ 1473 static int ep_req_rx(struct qe_ep *ep, struct qe_req *req) 1474 { 1475 struct qe_udc *udc = ep->udc; 1476 struct qe_frame *pframe = NULL; 1477 struct qe_bd __iomem *bd; 1478 u32 bdstatus, length; 1479 u32 vaddr, fsize; 1480 u8 *cp; 1481 u8 finish_req = 0; 1482 u8 framepid; 1483 1484 if (list_empty(&ep->queue)) { 1485 dev_vdbg(udc->dev, "the req already finish!\n"); 1486 return 0; 1487 } 1488 pframe = ep->rxframe; 1489 1490 bd = ep->n_rxbd; 1491 bdstatus = in_be32((u32 __iomem *)bd); 1492 length = bdstatus & BD_LENGTH_MASK; 1493 1494 while (!(bdstatus & R_E) && length) { 1495 if (finish_req) 1496 break; 1497 if ((bdstatus & R_F) && (bdstatus & R_L) 1498 && !(bdstatus & R_ERROR)) { 1499 qe_frame_clean(pframe); 1500 vaddr = (u32)phys_to_virt(in_be32(&bd->buf)); 1501 frame_set_data(pframe, (u8 *)vaddr); 1502 frame_set_length(pframe, (length - USB_CRC_SIZE)); 1503 frame_set_status(pframe, FRAME_OK); 1504 switch (bdstatus & R_PID) { 1505 case R_PID_DATA1: 1506 frame_set_info(pframe, PID_DATA1); break; 1507 default: 1508 frame_set_info(pframe, PID_DATA0); break; 1509 } 1510 /* handle the rx frame */ 1511 1512 if (frame_get_info(pframe) & PID_DATA1) 1513 framepid = 0x1; 1514 else 1515 framepid = 0; 1516 1517 if (framepid != ep->data01) { 1518 dev_vdbg(udc->dev, "the data01 error!\n"); 1519 } else { 1520 fsize = frame_get_length(pframe); 1521 1522 cp = (u8 *)(req->req.buf) + req->req.actual; 1523 if (cp) { 1524 memcpy(cp, pframe->data, fsize); 1525 req->req.actual += fsize; 1526 if ((fsize < ep->ep.maxpacket) 1527 || (req->req.actual >= 1528 req->req.length)) { 1529 finish_req = 1; 1530 done(ep, req, 0); 1531 if (list_empty(&ep->queue)) 1532 qe_eprx_nack(ep); 1533 } 1534 } 1535 qe_ep_toggledata01(ep); 1536 } 1537 } else { 1538 dev_err(udc->dev, "The receive frame with error!\n"); 1539 } 1540 1541 /* note: don't clear the rxbd's buffer address * 1542 * only Clear the length */ 1543 out_be32((u32 __iomem *)bd, (bdstatus & BD_STATUS_MASK)); 1544 ep->has_data--; 1545 1546 /* Get next BD */ 1547 if (bdstatus & R_W) 1548 bd = ep->rxbase; 1549 else 1550 bd++; 1551 1552 bdstatus = in_be32((u32 __iomem *)bd); 1553 length = bdstatus & BD_LENGTH_MASK; 1554 } 1555 1556 ep->n_rxbd = bd; 1557 ep_recycle_rxbds(ep); 1558 1559 return 0; 1560 } 1561 1562 /* only add the request in queue */ 1563 static int ep_req_receive(struct qe_ep *ep, struct qe_req *req) 1564 { 1565 if (ep->state == EP_STATE_NACK) { 1566 if (ep->has_data <= 0) { 1567 /* Enable rx and unmask rx interrupt */ 1568 qe_eprx_normal(ep); 1569 } else { 1570 /* Copy the exist BD data */ 1571 ep_req_rx(ep, req); 1572 } 1573 } 1574 1575 return 0; 1576 } 1577 1578 /******************************************************************** 1579 Internal Used Function End 1580 ********************************************************************/ 1581 1582 /*----------------------------------------------------------------------- 1583 Endpoint Management Functions For Gadget 1584 -----------------------------------------------------------------------*/ 1585 static int qe_ep_enable(struct usb_ep *_ep, 1586 const struct usb_endpoint_descriptor *desc) 1587 { 1588 struct qe_udc *udc; 1589 struct qe_ep *ep; 1590 int retval = 0; 1591 unsigned char epnum; 1592 1593 ep = container_of(_ep, struct qe_ep, ep); 1594 1595 /* catch various bogus parameters */ 1596 if (!_ep || !desc || _ep->name == ep_name[0] || 1597 (desc->bDescriptorType != USB_DT_ENDPOINT)) 1598 return -EINVAL; 1599 1600 udc = ep->udc; 1601 if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) 1602 return -ESHUTDOWN; 1603 1604 epnum = (u8)desc->bEndpointAddress & 0xF; 1605 1606 retval = qe_ep_init(udc, epnum, desc); 1607 if (retval != 0) { 1608 cpm_muram_free(cpm_muram_offset(ep->rxbase)); 1609 dev_dbg(udc->dev, "enable ep%d failed\n", ep->epnum); 1610 return -EINVAL; 1611 } 1612 dev_dbg(udc->dev, "enable ep%d successful\n", ep->epnum); 1613 return 0; 1614 } 1615 1616 static int qe_ep_disable(struct usb_ep *_ep) 1617 { 1618 struct qe_udc *udc; 1619 struct qe_ep *ep; 1620 unsigned long flags; 1621 unsigned int size; 1622 1623 ep = container_of(_ep, struct qe_ep, ep); 1624 udc = ep->udc; 1625 1626 if (!_ep || !ep->ep.desc) { 1627 dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL); 1628 return -EINVAL; 1629 } 1630 1631 spin_lock_irqsave(&udc->lock, flags); 1632 /* Nuke all pending requests (does flush) */ 1633 nuke(ep, -ESHUTDOWN); 1634 ep->ep.desc = NULL; 1635 ep->stopped = 1; 1636 ep->tx_req = NULL; 1637 qe_ep_reset(udc, ep->epnum); 1638 spin_unlock_irqrestore(&udc->lock, flags); 1639 1640 cpm_muram_free(cpm_muram_offset(ep->rxbase)); 1641 1642 if (ep->dir == USB_DIR_OUT) 1643 size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * 1644 (USB_BDRING_LEN_RX + 1); 1645 else 1646 size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * 1647 (USB_BDRING_LEN + 1); 1648 1649 if (ep->dir != USB_DIR_IN) { 1650 kfree(ep->rxframe); 1651 if (ep->rxbufmap) { 1652 dma_unmap_single(udc->gadget.dev.parent, 1653 ep->rxbuf_d, size, 1654 DMA_FROM_DEVICE); 1655 ep->rxbuf_d = DMA_ADDR_INVALID; 1656 } else { 1657 dma_sync_single_for_cpu( 1658 udc->gadget.dev.parent, 1659 ep->rxbuf_d, size, 1660 DMA_FROM_DEVICE); 1661 } 1662 kfree(ep->rxbuffer); 1663 } 1664 1665 if (ep->dir != USB_DIR_OUT) 1666 kfree(ep->txframe); 1667 1668 dev_dbg(udc->dev, "disabled %s OK\n", _ep->name); 1669 return 0; 1670 } 1671 1672 static struct usb_request *qe_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) 1673 { 1674 struct qe_req *req; 1675 1676 req = kzalloc(sizeof(*req), gfp_flags); 1677 if (!req) 1678 return NULL; 1679 1680 req->req.dma = DMA_ADDR_INVALID; 1681 1682 INIT_LIST_HEAD(&req->queue); 1683 1684 return &req->req; 1685 } 1686 1687 static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req) 1688 { 1689 struct qe_req *req; 1690 1691 req = container_of(_req, struct qe_req, req); 1692 1693 if (_req) 1694 kfree(req); 1695 } 1696 1697 static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) 1698 { 1699 struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); 1700 struct qe_req *req = container_of(_req, struct qe_req, req); 1701 struct qe_udc *udc; 1702 int reval; 1703 1704 udc = ep->udc; 1705 /* catch various bogus parameters */ 1706 if (!_req || !req->req.complete || !req->req.buf 1707 || !list_empty(&req->queue)) { 1708 dev_dbg(udc->dev, "bad params\n"); 1709 return -EINVAL; 1710 } 1711 if (!_ep || (!ep->ep.desc && ep_index(ep))) { 1712 dev_dbg(udc->dev, "bad ep\n"); 1713 return -EINVAL; 1714 } 1715 1716 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) 1717 return -ESHUTDOWN; 1718 1719 req->ep = ep; 1720 1721 /* map virtual address to hardware */ 1722 if (req->req.dma == DMA_ADDR_INVALID) { 1723 req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, 1724 req->req.buf, 1725 req->req.length, 1726 ep_is_in(ep) 1727 ? DMA_TO_DEVICE : 1728 DMA_FROM_DEVICE); 1729 req->mapped = 1; 1730 } else { 1731 dma_sync_single_for_device(ep->udc->gadget.dev.parent, 1732 req->req.dma, req->req.length, 1733 ep_is_in(ep) 1734 ? DMA_TO_DEVICE : 1735 DMA_FROM_DEVICE); 1736 req->mapped = 0; 1737 } 1738 1739 req->req.status = -EINPROGRESS; 1740 req->req.actual = 0; 1741 1742 list_add_tail(&req->queue, &ep->queue); 1743 dev_vdbg(udc->dev, "gadget have request in %s! %d\n", 1744 ep->name, req->req.length); 1745 1746 /* push the request to device */ 1747 if (ep_is_in(ep)) 1748 reval = ep_req_send(ep, req); 1749 1750 /* EP0 */ 1751 if (ep_index(ep) == 0 && req->req.length > 0) { 1752 if (ep_is_in(ep)) 1753 udc->ep0_state = DATA_STATE_XMIT; 1754 else 1755 udc->ep0_state = DATA_STATE_RECV; 1756 } 1757 1758 if (ep->dir == USB_DIR_OUT) 1759 reval = ep_req_receive(ep, req); 1760 1761 return 0; 1762 } 1763 1764 /* queues (submits) an I/O request to an endpoint */ 1765 static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, 1766 gfp_t gfp_flags) 1767 { 1768 struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); 1769 struct qe_udc *udc = ep->udc; 1770 unsigned long flags; 1771 int ret; 1772 1773 spin_lock_irqsave(&udc->lock, flags); 1774 ret = __qe_ep_queue(_ep, _req); 1775 spin_unlock_irqrestore(&udc->lock, flags); 1776 return ret; 1777 } 1778 1779 /* dequeues (cancels, unlinks) an I/O request from an endpoint */ 1780 static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) 1781 { 1782 struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); 1783 struct qe_req *req; 1784 unsigned long flags; 1785 1786 if (!_ep || !_req) 1787 return -EINVAL; 1788 1789 spin_lock_irqsave(&ep->udc->lock, flags); 1790 1791 /* make sure it's actually queued on this endpoint */ 1792 list_for_each_entry(req, &ep->queue, queue) { 1793 if (&req->req == _req) 1794 break; 1795 } 1796 1797 if (&req->req != _req) { 1798 spin_unlock_irqrestore(&ep->udc->lock, flags); 1799 return -EINVAL; 1800 } 1801 1802 done(ep, req, -ECONNRESET); 1803 1804 spin_unlock_irqrestore(&ep->udc->lock, flags); 1805 return 0; 1806 } 1807 1808 /*----------------------------------------------------------------- 1809 * modify the endpoint halt feature 1810 * @ep: the non-isochronous endpoint being stalled 1811 * @value: 1--set halt 0--clear halt 1812 * Returns zero, or a negative error code. 1813 *----------------------------------------------------------------*/ 1814 static int qe_ep_set_halt(struct usb_ep *_ep, int value) 1815 { 1816 struct qe_ep *ep; 1817 unsigned long flags; 1818 int status = -EOPNOTSUPP; 1819 struct qe_udc *udc; 1820 1821 ep = container_of(_ep, struct qe_ep, ep); 1822 if (!_ep || !ep->ep.desc) { 1823 status = -EINVAL; 1824 goto out; 1825 } 1826 1827 udc = ep->udc; 1828 /* Attempt to halt IN ep will fail if any transfer requests 1829 * are still queue */ 1830 if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { 1831 status = -EAGAIN; 1832 goto out; 1833 } 1834 1835 status = 0; 1836 spin_lock_irqsave(&ep->udc->lock, flags); 1837 qe_eptx_stall_change(ep, value); 1838 qe_eprx_stall_change(ep, value); 1839 spin_unlock_irqrestore(&ep->udc->lock, flags); 1840 1841 if (ep->epnum == 0) { 1842 udc->ep0_state = WAIT_FOR_SETUP; 1843 udc->ep0_dir = 0; 1844 } 1845 1846 /* set data toggle to DATA0 on clear halt */ 1847 if (value == 0) 1848 ep->data01 = 0; 1849 out: 1850 dev_vdbg(udc->dev, "%s %s halt stat %d\n", ep->ep.name, 1851 value ? "set" : "clear", status); 1852 1853 return status; 1854 } 1855 1856 static struct usb_ep_ops qe_ep_ops = { 1857 .enable = qe_ep_enable, 1858 .disable = qe_ep_disable, 1859 1860 .alloc_request = qe_alloc_request, 1861 .free_request = qe_free_request, 1862 1863 .queue = qe_ep_queue, 1864 .dequeue = qe_ep_dequeue, 1865 1866 .set_halt = qe_ep_set_halt, 1867 }; 1868 1869 /*------------------------------------------------------------------------ 1870 Gadget Driver Layer Operations 1871 ------------------------------------------------------------------------*/ 1872 1873 /* Get the current frame number */ 1874 static int qe_get_frame(struct usb_gadget *gadget) 1875 { 1876 struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget); 1877 u16 tmp; 1878 1879 tmp = in_be16(&udc->usb_param->frame_n); 1880 if (tmp & 0x8000) 1881 tmp = tmp & 0x07ff; 1882 else 1883 tmp = -EINVAL; 1884 1885 return (int)tmp; 1886 } 1887 1888 static int fsl_qe_start(struct usb_gadget *gadget, 1889 struct usb_gadget_driver *driver); 1890 static int fsl_qe_stop(struct usb_gadget *gadget); 1891 1892 /* defined in usb_gadget.h */ 1893 static const struct usb_gadget_ops qe_gadget_ops = { 1894 .get_frame = qe_get_frame, 1895 .udc_start = fsl_qe_start, 1896 .udc_stop = fsl_qe_stop, 1897 }; 1898 1899 /*------------------------------------------------------------------------- 1900 USB ep0 Setup process in BUS Enumeration 1901 -------------------------------------------------------------------------*/ 1902 static int udc_reset_ep_queue(struct qe_udc *udc, u8 pipe) 1903 { 1904 struct qe_ep *ep = &udc->eps[pipe]; 1905 1906 nuke(ep, -ECONNRESET); 1907 ep->tx_req = NULL; 1908 return 0; 1909 } 1910 1911 static int reset_queues(struct qe_udc *udc) 1912 { 1913 u8 pipe; 1914 1915 for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++) 1916 udc_reset_ep_queue(udc, pipe); 1917 1918 /* report disconnect; the driver is already quiesced */ 1919 spin_unlock(&udc->lock); 1920 usb_gadget_udc_reset(&udc->gadget, udc->driver); 1921 spin_lock(&udc->lock); 1922 1923 return 0; 1924 } 1925 1926 static void ch9setaddress(struct qe_udc *udc, u16 value, u16 index, 1927 u16 length) 1928 { 1929 /* Save the new address to device struct */ 1930 udc->device_address = (u8) value; 1931 /* Update usb state */ 1932 udc->usb_state = USB_STATE_ADDRESS; 1933 1934 /* Status phase , send a ZLP */ 1935 if (ep0_prime_status(udc, USB_DIR_IN)) 1936 qe_ep0_stall(udc); 1937 } 1938 1939 static void ownercomplete(struct usb_ep *_ep, struct usb_request *_req) 1940 { 1941 struct qe_req *req = container_of(_req, struct qe_req, req); 1942 1943 req->req.buf = NULL; 1944 kfree(req); 1945 } 1946 1947 static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, 1948 u16 index, u16 length) 1949 { 1950 u16 usb_status = 0; 1951 struct qe_req *req; 1952 struct qe_ep *ep; 1953 int status = 0; 1954 1955 ep = &udc->eps[0]; 1956 if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { 1957 /* Get device status */ 1958 usb_status = 1 << USB_DEVICE_SELF_POWERED; 1959 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { 1960 /* Get interface status */ 1961 /* We don't have interface information in udc driver */ 1962 usb_status = 0; 1963 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { 1964 /* Get endpoint status */ 1965 int pipe = index & USB_ENDPOINT_NUMBER_MASK; 1966 struct qe_ep *target_ep = &udc->eps[pipe]; 1967 u16 usep; 1968 1969 /* stall if endpoint doesn't exist */ 1970 if (!target_ep->ep.desc) 1971 goto stall; 1972 1973 usep = in_be16(&udc->usb_regs->usb_usep[pipe]); 1974 if (index & USB_DIR_IN) { 1975 if (target_ep->dir != USB_DIR_IN) 1976 goto stall; 1977 if ((usep & USB_THS_MASK) == USB_THS_STALL) 1978 usb_status = 1 << USB_ENDPOINT_HALT; 1979 } else { 1980 if (target_ep->dir != USB_DIR_OUT) 1981 goto stall; 1982 if ((usep & USB_RHS_MASK) == USB_RHS_STALL) 1983 usb_status = 1 << USB_ENDPOINT_HALT; 1984 } 1985 } 1986 1987 req = container_of(qe_alloc_request(&ep->ep, GFP_KERNEL), 1988 struct qe_req, req); 1989 req->req.length = 2; 1990 req->req.buf = udc->statusbuf; 1991 *(u16 *)req->req.buf = cpu_to_le16(usb_status); 1992 req->req.status = -EINPROGRESS; 1993 req->req.actual = 0; 1994 req->req.complete = ownercomplete; 1995 1996 udc->ep0_dir = USB_DIR_IN; 1997 1998 /* data phase */ 1999 status = __qe_ep_queue(&ep->ep, &req->req); 2000 2001 if (status == 0) 2002 return; 2003 stall: 2004 dev_err(udc->dev, "Can't respond to getstatus request \n"); 2005 qe_ep0_stall(udc); 2006 } 2007 2008 /* only handle the setup request, suppose the device in normal status */ 2009 static void setup_received_handle(struct qe_udc *udc, 2010 struct usb_ctrlrequest *setup) 2011 { 2012 /* Fix Endian (udc->local_setup_buff is cpu Endian now)*/ 2013 u16 wValue = le16_to_cpu(setup->wValue); 2014 u16 wIndex = le16_to_cpu(setup->wIndex); 2015 u16 wLength = le16_to_cpu(setup->wLength); 2016 2017 /* clear the previous request in the ep0 */ 2018 udc_reset_ep_queue(udc, 0); 2019 2020 if (setup->bRequestType & USB_DIR_IN) 2021 udc->ep0_dir = USB_DIR_IN; 2022 else 2023 udc->ep0_dir = USB_DIR_OUT; 2024 2025 switch (setup->bRequest) { 2026 case USB_REQ_GET_STATUS: 2027 /* Data+Status phase form udc */ 2028 if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) 2029 != (USB_DIR_IN | USB_TYPE_STANDARD)) 2030 break; 2031 ch9getstatus(udc, setup->bRequestType, wValue, wIndex, 2032 wLength); 2033 return; 2034 2035 case USB_REQ_SET_ADDRESS: 2036 /* Status phase from udc */ 2037 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | 2038 USB_RECIP_DEVICE)) 2039 break; 2040 ch9setaddress(udc, wValue, wIndex, wLength); 2041 return; 2042 2043 case USB_REQ_CLEAR_FEATURE: 2044 case USB_REQ_SET_FEATURE: 2045 /* Requests with no data phase, status phase from udc */ 2046 if ((setup->bRequestType & USB_TYPE_MASK) 2047 != USB_TYPE_STANDARD) 2048 break; 2049 2050 if ((setup->bRequestType & USB_RECIP_MASK) 2051 == USB_RECIP_ENDPOINT) { 2052 int pipe = wIndex & USB_ENDPOINT_NUMBER_MASK; 2053 struct qe_ep *ep; 2054 2055 if (wValue != 0 || wLength != 0 2056 || pipe > USB_MAX_ENDPOINTS) 2057 break; 2058 ep = &udc->eps[pipe]; 2059 2060 spin_unlock(&udc->lock); 2061 qe_ep_set_halt(&ep->ep, 2062 (setup->bRequest == USB_REQ_SET_FEATURE) 2063 ? 1 : 0); 2064 spin_lock(&udc->lock); 2065 } 2066 2067 ep0_prime_status(udc, USB_DIR_IN); 2068 2069 return; 2070 2071 default: 2072 break; 2073 } 2074 2075 if (wLength) { 2076 /* Data phase from gadget, status phase from udc */ 2077 if (setup->bRequestType & USB_DIR_IN) { 2078 udc->ep0_state = DATA_STATE_XMIT; 2079 udc->ep0_dir = USB_DIR_IN; 2080 } else { 2081 udc->ep0_state = DATA_STATE_RECV; 2082 udc->ep0_dir = USB_DIR_OUT; 2083 } 2084 spin_unlock(&udc->lock); 2085 if (udc->driver->setup(&udc->gadget, 2086 &udc->local_setup_buff) < 0) 2087 qe_ep0_stall(udc); 2088 spin_lock(&udc->lock); 2089 } else { 2090 /* No data phase, IN status from gadget */ 2091 udc->ep0_dir = USB_DIR_IN; 2092 spin_unlock(&udc->lock); 2093 if (udc->driver->setup(&udc->gadget, 2094 &udc->local_setup_buff) < 0) 2095 qe_ep0_stall(udc); 2096 spin_lock(&udc->lock); 2097 udc->ep0_state = DATA_STATE_NEED_ZLP; 2098 } 2099 } 2100 2101 /*------------------------------------------------------------------------- 2102 USB Interrupt handlers 2103 -------------------------------------------------------------------------*/ 2104 static void suspend_irq(struct qe_udc *udc) 2105 { 2106 udc->resume_state = udc->usb_state; 2107 udc->usb_state = USB_STATE_SUSPENDED; 2108 2109 /* report suspend to the driver ,serial.c not support this*/ 2110 if (udc->driver->suspend) 2111 udc->driver->suspend(&udc->gadget); 2112 } 2113 2114 static void resume_irq(struct qe_udc *udc) 2115 { 2116 udc->usb_state = udc->resume_state; 2117 udc->resume_state = 0; 2118 2119 /* report resume to the driver , serial.c not support this*/ 2120 if (udc->driver->resume) 2121 udc->driver->resume(&udc->gadget); 2122 } 2123 2124 static void idle_irq(struct qe_udc *udc) 2125 { 2126 u8 usbs; 2127 2128 usbs = in_8(&udc->usb_regs->usb_usbs); 2129 if (usbs & USB_IDLE_STATUS_MASK) { 2130 if ((udc->usb_state) != USB_STATE_SUSPENDED) 2131 suspend_irq(udc); 2132 } else { 2133 if (udc->usb_state == USB_STATE_SUSPENDED) 2134 resume_irq(udc); 2135 } 2136 } 2137 2138 static int reset_irq(struct qe_udc *udc) 2139 { 2140 unsigned char i; 2141 2142 if (udc->usb_state == USB_STATE_DEFAULT) 2143 return 0; 2144 2145 qe_usb_disable(udc); 2146 out_8(&udc->usb_regs->usb_usadr, 0); 2147 2148 for (i = 0; i < USB_MAX_ENDPOINTS; i++) { 2149 if (udc->eps[i].init) 2150 qe_ep_reset(udc, i); 2151 } 2152 2153 reset_queues(udc); 2154 udc->usb_state = USB_STATE_DEFAULT; 2155 udc->ep0_state = WAIT_FOR_SETUP; 2156 udc->ep0_dir = USB_DIR_OUT; 2157 qe_usb_enable(udc); 2158 return 0; 2159 } 2160 2161 static int bsy_irq(struct qe_udc *udc) 2162 { 2163 return 0; 2164 } 2165 2166 static int txe_irq(struct qe_udc *udc) 2167 { 2168 return 0; 2169 } 2170 2171 /* ep0 tx interrupt also in here */ 2172 static int tx_irq(struct qe_udc *udc) 2173 { 2174 struct qe_ep *ep; 2175 struct qe_bd __iomem *bd; 2176 int i, res = 0; 2177 2178 if ((udc->usb_state == USB_STATE_ADDRESS) 2179 && (in_8(&udc->usb_regs->usb_usadr) == 0)) 2180 out_8(&udc->usb_regs->usb_usadr, udc->device_address); 2181 2182 for (i = (USB_MAX_ENDPOINTS-1); ((i >= 0) && (res == 0)); i--) { 2183 ep = &udc->eps[i]; 2184 if (ep && ep->init && (ep->dir != USB_DIR_OUT)) { 2185 bd = ep->c_txbd; 2186 if (!(in_be32((u32 __iomem *)bd) & T_R) 2187 && (in_be32(&bd->buf))) { 2188 /* confirm the transmitted bd */ 2189 if (ep->epnum == 0) 2190 res = qe_ep0_txconf(ep); 2191 else 2192 res = qe_ep_txconf(ep); 2193 } 2194 } 2195 } 2196 return res; 2197 } 2198 2199 2200 /* setup packect's rx is handle in the function too */ 2201 static void rx_irq(struct qe_udc *udc) 2202 { 2203 struct qe_ep *ep; 2204 struct qe_bd __iomem *bd; 2205 int i; 2206 2207 for (i = 0; i < USB_MAX_ENDPOINTS; i++) { 2208 ep = &udc->eps[i]; 2209 if (ep && ep->init && (ep->dir != USB_DIR_IN)) { 2210 bd = ep->n_rxbd; 2211 if (!(in_be32((u32 __iomem *)bd) & R_E) 2212 && (in_be32(&bd->buf))) { 2213 if (ep->epnum == 0) { 2214 qe_ep0_rx(udc); 2215 } else { 2216 /*non-setup package receive*/ 2217 qe_ep_rx(ep); 2218 } 2219 } 2220 } 2221 } 2222 } 2223 2224 static irqreturn_t qe_udc_irq(int irq, void *_udc) 2225 { 2226 struct qe_udc *udc = (struct qe_udc *)_udc; 2227 u16 irq_src; 2228 irqreturn_t status = IRQ_NONE; 2229 unsigned long flags; 2230 2231 spin_lock_irqsave(&udc->lock, flags); 2232 2233 irq_src = in_be16(&udc->usb_regs->usb_usber) & 2234 in_be16(&udc->usb_regs->usb_usbmr); 2235 /* Clear notification bits */ 2236 out_be16(&udc->usb_regs->usb_usber, irq_src); 2237 /* USB Interrupt */ 2238 if (irq_src & USB_E_IDLE_MASK) { 2239 idle_irq(udc); 2240 irq_src &= ~USB_E_IDLE_MASK; 2241 status = IRQ_HANDLED; 2242 } 2243 2244 if (irq_src & USB_E_TXB_MASK) { 2245 tx_irq(udc); 2246 irq_src &= ~USB_E_TXB_MASK; 2247 status = IRQ_HANDLED; 2248 } 2249 2250 if (irq_src & USB_E_RXB_MASK) { 2251 rx_irq(udc); 2252 irq_src &= ~USB_E_RXB_MASK; 2253 status = IRQ_HANDLED; 2254 } 2255 2256 if (irq_src & USB_E_RESET_MASK) { 2257 reset_irq(udc); 2258 irq_src &= ~USB_E_RESET_MASK; 2259 status = IRQ_HANDLED; 2260 } 2261 2262 if (irq_src & USB_E_BSY_MASK) { 2263 bsy_irq(udc); 2264 irq_src &= ~USB_E_BSY_MASK; 2265 status = IRQ_HANDLED; 2266 } 2267 2268 if (irq_src & USB_E_TXE_MASK) { 2269 txe_irq(udc); 2270 irq_src &= ~USB_E_TXE_MASK; 2271 status = IRQ_HANDLED; 2272 } 2273 2274 spin_unlock_irqrestore(&udc->lock, flags); 2275 2276 return status; 2277 } 2278 2279 /*------------------------------------------------------------------------- 2280 Gadget driver probe and unregister. 2281 --------------------------------------------------------------------------*/ 2282 static int fsl_qe_start(struct usb_gadget *gadget, 2283 struct usb_gadget_driver *driver) 2284 { 2285 struct qe_udc *udc; 2286 unsigned long flags; 2287 2288 udc = container_of(gadget, struct qe_udc, gadget); 2289 /* lock is needed but whether should use this lock or another */ 2290 spin_lock_irqsave(&udc->lock, flags); 2291 2292 driver->driver.bus = NULL; 2293 /* hook up the driver */ 2294 udc->driver = driver; 2295 udc->gadget.speed = driver->max_speed; 2296 2297 /* Enable IRQ reg and Set usbcmd reg EN bit */ 2298 qe_usb_enable(udc); 2299 2300 out_be16(&udc->usb_regs->usb_usber, 0xffff); 2301 out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE); 2302 udc->usb_state = USB_STATE_ATTACHED; 2303 udc->ep0_state = WAIT_FOR_SETUP; 2304 udc->ep0_dir = USB_DIR_OUT; 2305 spin_unlock_irqrestore(&udc->lock, flags); 2306 2307 return 0; 2308 } 2309 2310 static int fsl_qe_stop(struct usb_gadget *gadget) 2311 { 2312 struct qe_udc *udc; 2313 struct qe_ep *loop_ep; 2314 unsigned long flags; 2315 2316 udc = container_of(gadget, struct qe_udc, gadget); 2317 /* stop usb controller, disable intr */ 2318 qe_usb_disable(udc); 2319 2320 /* in fact, no needed */ 2321 udc->usb_state = USB_STATE_ATTACHED; 2322 udc->ep0_state = WAIT_FOR_SETUP; 2323 udc->ep0_dir = 0; 2324 2325 /* stand operation */ 2326 spin_lock_irqsave(&udc->lock, flags); 2327 udc->gadget.speed = USB_SPEED_UNKNOWN; 2328 nuke(&udc->eps[0], -ESHUTDOWN); 2329 list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list) 2330 nuke(loop_ep, -ESHUTDOWN); 2331 spin_unlock_irqrestore(&udc->lock, flags); 2332 2333 udc->driver = NULL; 2334 2335 return 0; 2336 } 2337 2338 /* udc structure's alloc and setup, include ep-param alloc */ 2339 static struct qe_udc *qe_udc_config(struct platform_device *ofdev) 2340 { 2341 struct qe_udc *udc; 2342 struct device_node *np = ofdev->dev.of_node; 2343 unsigned int tmp_addr = 0; 2344 struct usb_device_para __iomem *usbpram; 2345 unsigned int i; 2346 u64 size; 2347 u32 offset; 2348 2349 udc = kzalloc(sizeof(*udc), GFP_KERNEL); 2350 if (udc == NULL) { 2351 dev_err(&ofdev->dev, "malloc udc failed\n"); 2352 goto cleanup; 2353 } 2354 2355 udc->dev = &ofdev->dev; 2356 2357 /* get default address of usb parameter in MURAM from device tree */ 2358 offset = *of_get_address(np, 1, &size, NULL); 2359 udc->usb_param = cpm_muram_addr(offset); 2360 memset_io(udc->usb_param, 0, size); 2361 2362 usbpram = udc->usb_param; 2363 out_be16(&usbpram->frame_n, 0); 2364 out_be32(&usbpram->rstate, 0); 2365 2366 tmp_addr = cpm_muram_alloc((USB_MAX_ENDPOINTS * 2367 sizeof(struct usb_ep_para)), 2368 USB_EP_PARA_ALIGNMENT); 2369 if (IS_ERR_VALUE(tmp_addr)) 2370 goto cleanup; 2371 2372 for (i = 0; i < USB_MAX_ENDPOINTS; i++) { 2373 out_be16(&usbpram->epptr[i], (u16)tmp_addr); 2374 udc->ep_param[i] = cpm_muram_addr(tmp_addr); 2375 tmp_addr += 32; 2376 } 2377 2378 memset_io(udc->ep_param[0], 0, 2379 USB_MAX_ENDPOINTS * sizeof(struct usb_ep_para)); 2380 2381 udc->resume_state = USB_STATE_NOTATTACHED; 2382 udc->usb_state = USB_STATE_POWERED; 2383 udc->ep0_dir = 0; 2384 2385 spin_lock_init(&udc->lock); 2386 return udc; 2387 2388 cleanup: 2389 kfree(udc); 2390 return NULL; 2391 } 2392 2393 /* USB Controller register init */ 2394 static int qe_udc_reg_init(struct qe_udc *udc) 2395 { 2396 struct usb_ctlr __iomem *qe_usbregs; 2397 qe_usbregs = udc->usb_regs; 2398 2399 /* Spec says that we must enable the USB controller to change mode. */ 2400 out_8(&qe_usbregs->usb_usmod, 0x01); 2401 /* Mode changed, now disable it, since muram isn't initialized yet. */ 2402 out_8(&qe_usbregs->usb_usmod, 0x00); 2403 2404 /* Initialize the rest. */ 2405 out_be16(&qe_usbregs->usb_usbmr, 0); 2406 out_8(&qe_usbregs->usb_uscom, 0); 2407 out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); 2408 2409 return 0; 2410 } 2411 2412 static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num) 2413 { 2414 struct qe_ep *ep = &udc->eps[pipe_num]; 2415 2416 ep->udc = udc; 2417 strcpy(ep->name, ep_name[pipe_num]); 2418 ep->ep.name = ep_name[pipe_num]; 2419 2420 if (pipe_num == 0) { 2421 ep->ep.caps.type_control = true; 2422 } else { 2423 ep->ep.caps.type_iso = true; 2424 ep->ep.caps.type_bulk = true; 2425 ep->ep.caps.type_int = true; 2426 } 2427 2428 ep->ep.caps.dir_in = true; 2429 ep->ep.caps.dir_out = true; 2430 2431 ep->ep.ops = &qe_ep_ops; 2432 ep->stopped = 1; 2433 usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); 2434 ep->ep.desc = NULL; 2435 ep->dir = 0xff; 2436 ep->epnum = (u8)pipe_num; 2437 ep->sent = 0; 2438 ep->last = 0; 2439 ep->init = 0; 2440 ep->rxframe = NULL; 2441 ep->txframe = NULL; 2442 ep->tx_req = NULL; 2443 ep->state = EP_STATE_IDLE; 2444 ep->has_data = 0; 2445 2446 /* the queue lists any req for this ep */ 2447 INIT_LIST_HEAD(&ep->queue); 2448 2449 /* gagdet.ep_list used for ep_autoconfig so no ep0*/ 2450 if (pipe_num != 0) 2451 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); 2452 2453 ep->gadget = &udc->gadget; 2454 2455 return 0; 2456 } 2457 2458 /*----------------------------------------------------------------------- 2459 * UDC device Driver operation functions * 2460 *----------------------------------------------------------------------*/ 2461 static void qe_udc_release(struct device *dev) 2462 { 2463 struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev); 2464 int i; 2465 2466 complete(udc->done); 2467 cpm_muram_free(cpm_muram_offset(udc->ep_param[0])); 2468 for (i = 0; i < USB_MAX_ENDPOINTS; i++) 2469 udc->ep_param[i] = NULL; 2470 2471 kfree(udc); 2472 } 2473 2474 /* Driver probe functions */ 2475 static const struct of_device_id qe_udc_match[]; 2476 static int qe_udc_probe(struct platform_device *ofdev) 2477 { 2478 struct qe_udc *udc; 2479 const struct of_device_id *match; 2480 struct device_node *np = ofdev->dev.of_node; 2481 struct qe_ep *ep; 2482 unsigned int ret = 0; 2483 unsigned int i; 2484 const void *prop; 2485 2486 match = of_match_device(qe_udc_match, &ofdev->dev); 2487 if (!match) 2488 return -EINVAL; 2489 2490 prop = of_get_property(np, "mode", NULL); 2491 if (!prop || strcmp(prop, "peripheral")) 2492 return -ENODEV; 2493 2494 /* Initialize the udc structure including QH member and other member */ 2495 udc = qe_udc_config(ofdev); 2496 if (!udc) { 2497 dev_err(&ofdev->dev, "failed to initialize\n"); 2498 return -ENOMEM; 2499 } 2500 2501 udc->soc_type = (unsigned long)match->data; 2502 udc->usb_regs = of_iomap(np, 0); 2503 if (!udc->usb_regs) { 2504 ret = -ENOMEM; 2505 goto err1; 2506 } 2507 2508 /* initialize usb hw reg except for regs for EP, 2509 * leave usbintr reg untouched*/ 2510 qe_udc_reg_init(udc); 2511 2512 /* here comes the stand operations for probe 2513 * set the qe_udc->gadget.xxx */ 2514 udc->gadget.ops = &qe_gadget_ops; 2515 2516 /* gadget.ep0 is a pointer */ 2517 udc->gadget.ep0 = &udc->eps[0].ep; 2518 2519 INIT_LIST_HEAD(&udc->gadget.ep_list); 2520 2521 /* modify in register gadget process */ 2522 udc->gadget.speed = USB_SPEED_UNKNOWN; 2523 2524 /* name: Identifies the controller hardware type. */ 2525 udc->gadget.name = driver_name; 2526 udc->gadget.dev.parent = &ofdev->dev; 2527 2528 /* initialize qe_ep struct */ 2529 for (i = 0; i < USB_MAX_ENDPOINTS ; i++) { 2530 /* because the ep type isn't decide here so 2531 * qe_ep_init() should be called in ep_enable() */ 2532 2533 /* setup the qe_ep struct and link ep.ep.list 2534 * into gadget.ep_list */ 2535 qe_ep_config(udc, (unsigned char)i); 2536 } 2537 2538 /* ep0 initialization in here */ 2539 ret = qe_ep_init(udc, 0, &qe_ep0_desc); 2540 if (ret) 2541 goto err2; 2542 2543 /* create a buf for ZLP send, need to remain zeroed */ 2544 udc->nullbuf = devm_kzalloc(&ofdev->dev, 256, GFP_KERNEL); 2545 if (udc->nullbuf == NULL) { 2546 ret = -ENOMEM; 2547 goto err3; 2548 } 2549 2550 /* buffer for data of get_status request */ 2551 udc->statusbuf = devm_kzalloc(&ofdev->dev, 2, GFP_KERNEL); 2552 if (udc->statusbuf == NULL) { 2553 ret = -ENOMEM; 2554 goto err3; 2555 } 2556 2557 udc->nullp = virt_to_phys((void *)udc->nullbuf); 2558 if (udc->nullp == DMA_ADDR_INVALID) { 2559 udc->nullp = dma_map_single( 2560 udc->gadget.dev.parent, 2561 udc->nullbuf, 2562 256, 2563 DMA_TO_DEVICE); 2564 udc->nullmap = 1; 2565 } else { 2566 dma_sync_single_for_device(udc->gadget.dev.parent, 2567 udc->nullp, 256, 2568 DMA_TO_DEVICE); 2569 } 2570 2571 tasklet_init(&udc->rx_tasklet, ep_rx_tasklet, 2572 (unsigned long)udc); 2573 /* request irq and disable DR */ 2574 udc->usb_irq = irq_of_parse_and_map(np, 0); 2575 if (!udc->usb_irq) { 2576 ret = -EINVAL; 2577 goto err_noirq; 2578 } 2579 2580 ret = request_irq(udc->usb_irq, qe_udc_irq, 0, 2581 driver_name, udc); 2582 if (ret) { 2583 dev_err(udc->dev, "cannot request irq %d err %d\n", 2584 udc->usb_irq, ret); 2585 goto err4; 2586 } 2587 2588 ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget, 2589 qe_udc_release); 2590 if (ret) 2591 goto err5; 2592 2593 platform_set_drvdata(ofdev, udc); 2594 dev_info(udc->dev, 2595 "%s USB controller initialized as device\n", 2596 (udc->soc_type == PORT_QE) ? "QE" : "CPM"); 2597 return 0; 2598 2599 err5: 2600 free_irq(udc->usb_irq, udc); 2601 err4: 2602 irq_dispose_mapping(udc->usb_irq); 2603 err_noirq: 2604 if (udc->nullmap) { 2605 dma_unmap_single(udc->gadget.dev.parent, 2606 udc->nullp, 256, 2607 DMA_TO_DEVICE); 2608 udc->nullp = DMA_ADDR_INVALID; 2609 } else { 2610 dma_sync_single_for_cpu(udc->gadget.dev.parent, 2611 udc->nullp, 256, 2612 DMA_TO_DEVICE); 2613 } 2614 err3: 2615 ep = &udc->eps[0]; 2616 cpm_muram_free(cpm_muram_offset(ep->rxbase)); 2617 kfree(ep->rxframe); 2618 kfree(ep->rxbuffer); 2619 kfree(ep->txframe); 2620 err2: 2621 iounmap(udc->usb_regs); 2622 err1: 2623 kfree(udc); 2624 return ret; 2625 } 2626 2627 #ifdef CONFIG_PM 2628 static int qe_udc_suspend(struct platform_device *dev, pm_message_t state) 2629 { 2630 return -ENOTSUPP; 2631 } 2632 2633 static int qe_udc_resume(struct platform_device *dev) 2634 { 2635 return -ENOTSUPP; 2636 } 2637 #endif 2638 2639 static int qe_udc_remove(struct platform_device *ofdev) 2640 { 2641 struct qe_udc *udc = platform_get_drvdata(ofdev); 2642 struct qe_ep *ep; 2643 unsigned int size; 2644 DECLARE_COMPLETION_ONSTACK(done); 2645 2646 usb_del_gadget_udc(&udc->gadget); 2647 2648 udc->done = &done; 2649 tasklet_disable(&udc->rx_tasklet); 2650 2651 if (udc->nullmap) { 2652 dma_unmap_single(udc->gadget.dev.parent, 2653 udc->nullp, 256, 2654 DMA_TO_DEVICE); 2655 udc->nullp = DMA_ADDR_INVALID; 2656 } else { 2657 dma_sync_single_for_cpu(udc->gadget.dev.parent, 2658 udc->nullp, 256, 2659 DMA_TO_DEVICE); 2660 } 2661 2662 ep = &udc->eps[0]; 2663 cpm_muram_free(cpm_muram_offset(ep->rxbase)); 2664 size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1); 2665 2666 kfree(ep->rxframe); 2667 if (ep->rxbufmap) { 2668 dma_unmap_single(udc->gadget.dev.parent, 2669 ep->rxbuf_d, size, 2670 DMA_FROM_DEVICE); 2671 ep->rxbuf_d = DMA_ADDR_INVALID; 2672 } else { 2673 dma_sync_single_for_cpu(udc->gadget.dev.parent, 2674 ep->rxbuf_d, size, 2675 DMA_FROM_DEVICE); 2676 } 2677 2678 kfree(ep->rxbuffer); 2679 kfree(ep->txframe); 2680 2681 free_irq(udc->usb_irq, udc); 2682 irq_dispose_mapping(udc->usb_irq); 2683 2684 tasklet_kill(&udc->rx_tasklet); 2685 2686 iounmap(udc->usb_regs); 2687 2688 /* wait for release() of gadget.dev to free udc */ 2689 wait_for_completion(&done); 2690 2691 return 0; 2692 } 2693 2694 /*-------------------------------------------------------------------------*/ 2695 static const struct of_device_id qe_udc_match[] = { 2696 { 2697 .compatible = "fsl,mpc8323-qe-usb", 2698 .data = (void *)PORT_QE, 2699 }, 2700 { 2701 .compatible = "fsl,mpc8360-qe-usb", 2702 .data = (void *)PORT_QE, 2703 }, 2704 { 2705 .compatible = "fsl,mpc8272-cpm-usb", 2706 .data = (void *)PORT_CPM, 2707 }, 2708 {}, 2709 }; 2710 2711 MODULE_DEVICE_TABLE(of, qe_udc_match); 2712 2713 static struct platform_driver udc_driver = { 2714 .driver = { 2715 .name = driver_name, 2716 .of_match_table = qe_udc_match, 2717 }, 2718 .probe = qe_udc_probe, 2719 .remove = qe_udc_remove, 2720 #ifdef CONFIG_PM 2721 .suspend = qe_udc_suspend, 2722 .resume = qe_udc_resume, 2723 #endif 2724 }; 2725 2726 module_platform_driver(udc_driver); 2727 2728 MODULE_DESCRIPTION(DRIVER_DESC); 2729 MODULE_AUTHOR(DRIVER_AUTHOR); 2730 MODULE_LICENSE("GPL"); 2731