1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver. 4 * 5 * Maintainer: Alan Stern <stern@rowland.harvard.edu> 6 * 7 * Copyright (C) 2003 David Brownell 8 * Copyright (C) 2003-2005 Alan Stern 9 */ 10 11 12 /* 13 * This exposes a device side "USB gadget" API, driven by requests to a 14 * Linux-USB host controller driver. USB traffic is simulated; there's 15 * no need for USB hardware. Use this with two other drivers: 16 * 17 * - Gadget driver, responding to requests (device); 18 * - Host-side device driver, as already familiar in Linux. 19 * 20 * Having this all in one kernel can help some stages of development, 21 * bypassing some hardware (and driver) issues. UML could help too. 22 * 23 * Note: The emulation does not include isochronous transfers! 24 */ 25 26 #include <linux/module.h> 27 #include <linux/kernel.h> 28 #include <linux/delay.h> 29 #include <linux/ioport.h> 30 #include <linux/slab.h> 31 #include <linux/errno.h> 32 #include <linux/init.h> 33 #include <linux/hrtimer.h> 34 #include <linux/list.h> 35 #include <linux/interrupt.h> 36 #include <linux/platform_device.h> 37 #include <linux/usb.h> 38 #include <linux/usb/gadget.h> 39 #include <linux/usb/hcd.h> 40 #include <linux/scatterlist.h> 41 42 #include <asm/byteorder.h> 43 #include <linux/io.h> 44 #include <asm/irq.h> 45 #include <asm/unaligned.h> 46 47 #define DRIVER_DESC "USB Host+Gadget Emulator" 48 #define DRIVER_VERSION "02 May 2005" 49 50 #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ 51 #define POWER_BUDGET_3 900 /* in mA */ 52 53 #define DUMMY_TIMER_INT_NSECS 125000 /* 1 microframe */ 54 55 static const char driver_name[] = "dummy_hcd"; 56 static const char driver_desc[] = "USB Host+Gadget Emulator"; 57 58 static const char gadget_name[] = "dummy_udc"; 59 60 MODULE_DESCRIPTION(DRIVER_DESC); 61 MODULE_AUTHOR("David Brownell"); 62 MODULE_LICENSE("GPL"); 63 64 struct dummy_hcd_module_parameters { 65 bool is_super_speed; 66 bool is_high_speed; 67 unsigned int num; 68 }; 69 70 static struct dummy_hcd_module_parameters mod_data = { 71 .is_super_speed = false, 72 .is_high_speed = true, 73 .num = 1, 74 }; 75 module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO); 76 MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection"); 77 module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO); 78 MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection"); 79 module_param_named(num, mod_data.num, uint, S_IRUGO); 80 MODULE_PARM_DESC(num, "number of emulated controllers"); 81 /*-------------------------------------------------------------------------*/ 82 83 /* gadget side driver data structres */ 84 struct dummy_ep { 85 struct list_head queue; 86 unsigned long last_io; /* jiffies timestamp */ 87 struct usb_gadget *gadget; 88 const struct usb_endpoint_descriptor *desc; 89 struct usb_ep ep; 90 unsigned halted:1; 91 unsigned wedged:1; 92 unsigned already_seen:1; 93 unsigned setup_stage:1; 94 unsigned stream_en:1; 95 }; 96 97 struct dummy_request { 98 struct list_head queue; /* ep's requests */ 99 struct usb_request req; 100 }; 101 102 static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep) 103 { 104 return container_of(_ep, struct dummy_ep, ep); 105 } 106 107 static inline struct dummy_request *usb_request_to_dummy_request 108 (struct usb_request *_req) 109 { 110 return container_of(_req, struct dummy_request, req); 111 } 112 113 /*-------------------------------------------------------------------------*/ 114 115 /* 116 * Every device has ep0 for control requests, plus up to 30 more endpoints, 117 * in one of two types: 118 * 119 * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint 120 * number can be changed. Names like "ep-a" are used for this type. 121 * 122 * - Fixed Function: in other cases. some characteristics may be mutable; 123 * that'd be hardware-specific. Names like "ep12out-bulk" are used. 124 * 125 * Gadget drivers are responsible for not setting up conflicting endpoint 126 * configurations, illegal or unsupported packet lengths, and so on. 127 */ 128 129 static const char ep0name[] = "ep0"; 130 131 static const struct { 132 const char *name; 133 const struct usb_ep_caps caps; 134 } ep_info[] = { 135 #define EP_INFO(_name, _caps) \ 136 { \ 137 .name = _name, \ 138 .caps = _caps, \ 139 } 140 141 /* we don't provide isochronous endpoints since we don't support them */ 142 #define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT) 143 144 /* everyone has ep0 */ 145 EP_INFO(ep0name, 146 USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), 147 /* act like a pxa250: fifteen fixed function endpoints */ 148 EP_INFO("ep1in-bulk", 149 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 150 EP_INFO("ep2out-bulk", 151 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 152 /* 153 EP_INFO("ep3in-iso", 154 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), 155 EP_INFO("ep4out-iso", 156 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), 157 */ 158 EP_INFO("ep5in-int", 159 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 160 EP_INFO("ep6in-bulk", 161 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 162 EP_INFO("ep7out-bulk", 163 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 164 /* 165 EP_INFO("ep8in-iso", 166 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), 167 EP_INFO("ep9out-iso", 168 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), 169 */ 170 EP_INFO("ep10in-int", 171 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 172 EP_INFO("ep11in-bulk", 173 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 174 EP_INFO("ep12out-bulk", 175 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 176 /* 177 EP_INFO("ep13in-iso", 178 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), 179 EP_INFO("ep14out-iso", 180 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), 181 */ 182 EP_INFO("ep15in-int", 183 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 184 185 /* or like sa1100: two fixed function endpoints */ 186 EP_INFO("ep1out-bulk", 187 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 188 EP_INFO("ep2in-bulk", 189 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 190 191 /* and now some generic EPs so we have enough in multi config */ 192 EP_INFO("ep-aout", 193 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 194 EP_INFO("ep-bin", 195 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 196 EP_INFO("ep-cout", 197 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 198 EP_INFO("ep-dout", 199 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 200 EP_INFO("ep-ein", 201 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 202 EP_INFO("ep-fout", 203 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 204 EP_INFO("ep-gin", 205 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 206 EP_INFO("ep-hout", 207 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 208 EP_INFO("ep-iout", 209 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 210 EP_INFO("ep-jin", 211 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 212 EP_INFO("ep-kout", 213 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 214 EP_INFO("ep-lin", 215 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 216 EP_INFO("ep-mout", 217 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 218 219 #undef EP_INFO 220 }; 221 222 #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info) 223 224 /*-------------------------------------------------------------------------*/ 225 226 #define FIFO_SIZE 64 227 228 struct urbp { 229 struct urb *urb; 230 struct list_head urbp_list; 231 struct sg_mapping_iter miter; 232 u32 miter_started; 233 }; 234 235 236 enum dummy_rh_state { 237 DUMMY_RH_RESET, 238 DUMMY_RH_SUSPENDED, 239 DUMMY_RH_RUNNING 240 }; 241 242 struct dummy_hcd { 243 struct dummy *dum; 244 enum dummy_rh_state rh_state; 245 struct hrtimer timer; 246 u32 port_status; 247 u32 old_status; 248 unsigned long re_timeout; 249 250 struct usb_device *udev; 251 struct list_head urbp_list; 252 struct urbp *next_frame_urbp; 253 254 u32 stream_en_ep; 255 u8 num_stream[30 / 2]; 256 257 unsigned active:1; 258 unsigned old_active:1; 259 unsigned resuming:1; 260 }; 261 262 struct dummy { 263 spinlock_t lock; 264 265 /* 266 * DEVICE/GADGET side support 267 */ 268 struct dummy_ep ep[DUMMY_ENDPOINTS]; 269 int address; 270 int callback_usage; 271 struct usb_gadget gadget; 272 struct usb_gadget_driver *driver; 273 struct dummy_request fifo_req; 274 u8 fifo_buf[FIFO_SIZE]; 275 u16 devstatus; 276 unsigned ints_enabled:1; 277 unsigned udc_suspended:1; 278 unsigned pullup:1; 279 280 /* 281 * HOST side support 282 */ 283 struct dummy_hcd *hs_hcd; 284 struct dummy_hcd *ss_hcd; 285 }; 286 287 static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd) 288 { 289 return (struct dummy_hcd *) (hcd->hcd_priv); 290 } 291 292 static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum) 293 { 294 return container_of((void *) dum, struct usb_hcd, hcd_priv); 295 } 296 297 static inline struct device *dummy_dev(struct dummy_hcd *dum) 298 { 299 return dummy_hcd_to_hcd(dum)->self.controller; 300 } 301 302 static inline struct device *udc_dev(struct dummy *dum) 303 { 304 return dum->gadget.dev.parent; 305 } 306 307 static inline struct dummy *ep_to_dummy(struct dummy_ep *ep) 308 { 309 return container_of(ep->gadget, struct dummy, gadget); 310 } 311 312 static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget) 313 { 314 struct dummy *dum = container_of(gadget, struct dummy, gadget); 315 if (dum->gadget.speed == USB_SPEED_SUPER) 316 return dum->ss_hcd; 317 else 318 return dum->hs_hcd; 319 } 320 321 static inline struct dummy *gadget_dev_to_dummy(struct device *dev) 322 { 323 return container_of(dev, struct dummy, gadget.dev); 324 } 325 326 /*-------------------------------------------------------------------------*/ 327 328 /* DEVICE/GADGET SIDE UTILITY ROUTINES */ 329 330 /* called with spinlock held */ 331 static void nuke(struct dummy *dum, struct dummy_ep *ep) 332 { 333 while (!list_empty(&ep->queue)) { 334 struct dummy_request *req; 335 336 req = list_entry(ep->queue.next, struct dummy_request, queue); 337 list_del_init(&req->queue); 338 req->req.status = -ESHUTDOWN; 339 340 spin_unlock(&dum->lock); 341 usb_gadget_giveback_request(&ep->ep, &req->req); 342 spin_lock(&dum->lock); 343 } 344 } 345 346 /* caller must hold lock */ 347 static void stop_activity(struct dummy *dum) 348 { 349 int i; 350 351 /* prevent any more requests */ 352 dum->address = 0; 353 354 /* The timer is left running so that outstanding URBs can fail */ 355 356 /* nuke any pending requests first, so driver i/o is quiesced */ 357 for (i = 0; i < DUMMY_ENDPOINTS; ++i) 358 nuke(dum, &dum->ep[i]); 359 360 /* driver now does any non-usb quiescing necessary */ 361 } 362 363 /** 364 * set_link_state_by_speed() - Sets the current state of the link according to 365 * the hcd speed 366 * @dum_hcd: pointer to the dummy_hcd structure to update the link state for 367 * 368 * This function updates the port_status according to the link state and the 369 * speed of the hcd. 370 */ 371 static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) 372 { 373 struct dummy *dum = dum_hcd->dum; 374 375 if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) { 376 if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) { 377 dum_hcd->port_status = 0; 378 } else if (!dum->pullup || dum->udc_suspended) { 379 /* UDC suspend must cause a disconnect */ 380 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | 381 USB_PORT_STAT_ENABLE); 382 if ((dum_hcd->old_status & 383 USB_PORT_STAT_CONNECTION) != 0) 384 dum_hcd->port_status |= 385 (USB_PORT_STAT_C_CONNECTION << 16); 386 } else { 387 /* device is connected and not suspended */ 388 dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION | 389 USB_PORT_STAT_SPEED_5GBPS) ; 390 if ((dum_hcd->old_status & 391 USB_PORT_STAT_CONNECTION) == 0) 392 dum_hcd->port_status |= 393 (USB_PORT_STAT_C_CONNECTION << 16); 394 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) && 395 (dum_hcd->port_status & 396 USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 && 397 dum_hcd->rh_state != DUMMY_RH_SUSPENDED) 398 dum_hcd->active = 1; 399 } 400 } else { 401 if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) { 402 dum_hcd->port_status = 0; 403 } else if (!dum->pullup || dum->udc_suspended) { 404 /* UDC suspend must cause a disconnect */ 405 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | 406 USB_PORT_STAT_ENABLE | 407 USB_PORT_STAT_LOW_SPEED | 408 USB_PORT_STAT_HIGH_SPEED | 409 USB_PORT_STAT_SUSPEND); 410 if ((dum_hcd->old_status & 411 USB_PORT_STAT_CONNECTION) != 0) 412 dum_hcd->port_status |= 413 (USB_PORT_STAT_C_CONNECTION << 16); 414 } else { 415 dum_hcd->port_status |= USB_PORT_STAT_CONNECTION; 416 if ((dum_hcd->old_status & 417 USB_PORT_STAT_CONNECTION) == 0) 418 dum_hcd->port_status |= 419 (USB_PORT_STAT_C_CONNECTION << 16); 420 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0) 421 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; 422 else if ((dum_hcd->port_status & 423 USB_PORT_STAT_SUSPEND) == 0 && 424 dum_hcd->rh_state != DUMMY_RH_SUSPENDED) 425 dum_hcd->active = 1; 426 } 427 } 428 } 429 430 /* caller must hold lock */ 431 static void set_link_state(struct dummy_hcd *dum_hcd) 432 __must_hold(&dum->lock) 433 { 434 struct dummy *dum = dum_hcd->dum; 435 unsigned int power_bit; 436 437 dum_hcd->active = 0; 438 if (dum->pullup) 439 if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 && 440 dum->gadget.speed != USB_SPEED_SUPER) || 441 (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 && 442 dum->gadget.speed == USB_SPEED_SUPER)) 443 return; 444 445 set_link_state_by_speed(dum_hcd); 446 power_bit = (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 ? 447 USB_SS_PORT_STAT_POWER : USB_PORT_STAT_POWER); 448 449 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 || 450 dum_hcd->active) 451 dum_hcd->resuming = 0; 452 453 /* Currently !connected or in reset */ 454 if ((dum_hcd->port_status & power_bit) == 0 || 455 (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { 456 unsigned int disconnect = power_bit & 457 dum_hcd->old_status & (~dum_hcd->port_status); 458 unsigned int reset = USB_PORT_STAT_RESET & 459 (~dum_hcd->old_status) & dum_hcd->port_status; 460 461 /* Report reset and disconnect events to the driver */ 462 if (dum->ints_enabled && (disconnect || reset)) { 463 stop_activity(dum); 464 ++dum->callback_usage; 465 spin_unlock(&dum->lock); 466 if (reset) 467 usb_gadget_udc_reset(&dum->gadget, dum->driver); 468 else 469 dum->driver->disconnect(&dum->gadget); 470 spin_lock(&dum->lock); 471 --dum->callback_usage; 472 } 473 } else if (dum_hcd->active != dum_hcd->old_active && 474 dum->ints_enabled) { 475 ++dum->callback_usage; 476 spin_unlock(&dum->lock); 477 if (dum_hcd->old_active && dum->driver->suspend) 478 dum->driver->suspend(&dum->gadget); 479 else if (!dum_hcd->old_active && dum->driver->resume) 480 dum->driver->resume(&dum->gadget); 481 spin_lock(&dum->lock); 482 --dum->callback_usage; 483 } 484 485 dum_hcd->old_status = dum_hcd->port_status; 486 dum_hcd->old_active = dum_hcd->active; 487 } 488 489 /*-------------------------------------------------------------------------*/ 490 491 /* DEVICE/GADGET SIDE DRIVER 492 * 493 * This only tracks gadget state. All the work is done when the host 494 * side tries some (emulated) i/o operation. Real device controller 495 * drivers would do real i/o using dma, fifos, irqs, timers, etc. 496 */ 497 498 #define is_enabled(dum) \ 499 (dum->port_status & USB_PORT_STAT_ENABLE) 500 501 static int dummy_enable(struct usb_ep *_ep, 502 const struct usb_endpoint_descriptor *desc) 503 { 504 struct dummy *dum; 505 struct dummy_hcd *dum_hcd; 506 struct dummy_ep *ep; 507 unsigned max; 508 int retval; 509 510 ep = usb_ep_to_dummy_ep(_ep); 511 if (!_ep || !desc || ep->desc || _ep->name == ep0name 512 || desc->bDescriptorType != USB_DT_ENDPOINT) 513 return -EINVAL; 514 dum = ep_to_dummy(ep); 515 if (!dum->driver) 516 return -ESHUTDOWN; 517 518 dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 519 if (!is_enabled(dum_hcd)) 520 return -ESHUTDOWN; 521 522 /* 523 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the 524 * maximum packet size. 525 * For SS devices the wMaxPacketSize is limited by 1024. 526 */ 527 max = usb_endpoint_maxp(desc); 528 529 /* drivers must not request bad settings, since lower levels 530 * (hardware or its drivers) may not check. some endpoints 531 * can't do iso, many have maxpacket limitations, etc. 532 * 533 * since this "hardware" driver is here to help debugging, we 534 * have some extra sanity checks. (there could be more though, 535 * especially for "ep9out" style fixed function ones.) 536 */ 537 retval = -EINVAL; 538 switch (usb_endpoint_type(desc)) { 539 case USB_ENDPOINT_XFER_BULK: 540 if (strstr(ep->ep.name, "-iso") 541 || strstr(ep->ep.name, "-int")) { 542 goto done; 543 } 544 switch (dum->gadget.speed) { 545 case USB_SPEED_SUPER: 546 if (max == 1024) 547 break; 548 goto done; 549 case USB_SPEED_HIGH: 550 if (max == 512) 551 break; 552 goto done; 553 case USB_SPEED_FULL: 554 if (max == 8 || max == 16 || max == 32 || max == 64) 555 /* we'll fake any legal size */ 556 break; 557 /* save a return statement */ 558 fallthrough; 559 default: 560 goto done; 561 } 562 break; 563 case USB_ENDPOINT_XFER_INT: 564 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ 565 goto done; 566 /* real hardware might not handle all packet sizes */ 567 switch (dum->gadget.speed) { 568 case USB_SPEED_SUPER: 569 case USB_SPEED_HIGH: 570 if (max <= 1024) 571 break; 572 /* save a return statement */ 573 fallthrough; 574 case USB_SPEED_FULL: 575 if (max <= 64) 576 break; 577 /* save a return statement */ 578 fallthrough; 579 default: 580 if (max <= 8) 581 break; 582 goto done; 583 } 584 break; 585 case USB_ENDPOINT_XFER_ISOC: 586 if (strstr(ep->ep.name, "-bulk") 587 || strstr(ep->ep.name, "-int")) 588 goto done; 589 /* real hardware might not handle all packet sizes */ 590 switch (dum->gadget.speed) { 591 case USB_SPEED_SUPER: 592 case USB_SPEED_HIGH: 593 if (max <= 1024) 594 break; 595 /* save a return statement */ 596 fallthrough; 597 case USB_SPEED_FULL: 598 if (max <= 1023) 599 break; 600 /* save a return statement */ 601 fallthrough; 602 default: 603 goto done; 604 } 605 break; 606 default: 607 /* few chips support control except on ep0 */ 608 goto done; 609 } 610 611 _ep->maxpacket = max; 612 if (usb_ss_max_streams(_ep->comp_desc)) { 613 if (!usb_endpoint_xfer_bulk(desc)) { 614 dev_err(udc_dev(dum), "Can't enable stream support on " 615 "non-bulk ep %s\n", _ep->name); 616 return -EINVAL; 617 } 618 ep->stream_en = 1; 619 } 620 ep->desc = desc; 621 622 dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n", 623 _ep->name, 624 desc->bEndpointAddress & 0x0f, 625 (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", 626 usb_ep_type_string(usb_endpoint_type(desc)), 627 max, ep->stream_en ? "enabled" : "disabled"); 628 629 /* at this point real hardware should be NAKing transfers 630 * to that endpoint, until a buffer is queued to it. 631 */ 632 ep->halted = ep->wedged = 0; 633 retval = 0; 634 done: 635 return retval; 636 } 637 638 static int dummy_disable(struct usb_ep *_ep) 639 { 640 struct dummy_ep *ep; 641 struct dummy *dum; 642 unsigned long flags; 643 644 ep = usb_ep_to_dummy_ep(_ep); 645 if (!_ep || !ep->desc || _ep->name == ep0name) 646 return -EINVAL; 647 dum = ep_to_dummy(ep); 648 649 spin_lock_irqsave(&dum->lock, flags); 650 ep->desc = NULL; 651 ep->stream_en = 0; 652 nuke(dum, ep); 653 spin_unlock_irqrestore(&dum->lock, flags); 654 655 dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name); 656 return 0; 657 } 658 659 static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, 660 gfp_t mem_flags) 661 { 662 struct dummy_request *req; 663 664 if (!_ep) 665 return NULL; 666 667 req = kzalloc(sizeof(*req), mem_flags); 668 if (!req) 669 return NULL; 670 INIT_LIST_HEAD(&req->queue); 671 return &req->req; 672 } 673 674 static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req) 675 { 676 struct dummy_request *req; 677 678 if (!_ep || !_req) { 679 WARN_ON(1); 680 return; 681 } 682 683 req = usb_request_to_dummy_request(_req); 684 WARN_ON(!list_empty(&req->queue)); 685 kfree(req); 686 } 687 688 static void fifo_complete(struct usb_ep *ep, struct usb_request *req) 689 { 690 } 691 692 static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req, 693 gfp_t mem_flags) 694 { 695 struct dummy_ep *ep; 696 struct dummy_request *req; 697 struct dummy *dum; 698 struct dummy_hcd *dum_hcd; 699 unsigned long flags; 700 701 req = usb_request_to_dummy_request(_req); 702 if (!_req || !list_empty(&req->queue) || !_req->complete) 703 return -EINVAL; 704 705 ep = usb_ep_to_dummy_ep(_ep); 706 if (!_ep || (!ep->desc && _ep->name != ep0name)) 707 return -EINVAL; 708 709 dum = ep_to_dummy(ep); 710 dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 711 if (!dum->driver || !is_enabled(dum_hcd)) 712 return -ESHUTDOWN; 713 714 #if 0 715 dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n", 716 ep, _req, _ep->name, _req->length, _req->buf); 717 #endif 718 _req->status = -EINPROGRESS; 719 _req->actual = 0; 720 spin_lock_irqsave(&dum->lock, flags); 721 722 /* implement an emulated single-request FIFO */ 723 if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && 724 list_empty(&dum->fifo_req.queue) && 725 list_empty(&ep->queue) && 726 _req->length <= FIFO_SIZE) { 727 req = &dum->fifo_req; 728 req->req = *_req; 729 req->req.buf = dum->fifo_buf; 730 memcpy(dum->fifo_buf, _req->buf, _req->length); 731 req->req.context = dum; 732 req->req.complete = fifo_complete; 733 734 list_add_tail(&req->queue, &ep->queue); 735 spin_unlock(&dum->lock); 736 _req->actual = _req->length; 737 _req->status = 0; 738 usb_gadget_giveback_request(_ep, _req); 739 spin_lock(&dum->lock); 740 } else 741 list_add_tail(&req->queue, &ep->queue); 742 spin_unlock_irqrestore(&dum->lock, flags); 743 744 /* real hardware would likely enable transfers here, in case 745 * it'd been left NAKing. 746 */ 747 return 0; 748 } 749 750 static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req) 751 { 752 struct dummy_ep *ep; 753 struct dummy *dum; 754 int retval = -EINVAL; 755 unsigned long flags; 756 struct dummy_request *req = NULL, *iter; 757 758 if (!_ep || !_req) 759 return retval; 760 ep = usb_ep_to_dummy_ep(_ep); 761 dum = ep_to_dummy(ep); 762 763 if (!dum->driver) 764 return -ESHUTDOWN; 765 766 local_irq_save(flags); 767 spin_lock(&dum->lock); 768 list_for_each_entry(iter, &ep->queue, queue) { 769 if (&iter->req != _req) 770 continue; 771 list_del_init(&iter->queue); 772 _req->status = -ECONNRESET; 773 req = iter; 774 retval = 0; 775 break; 776 } 777 spin_unlock(&dum->lock); 778 779 if (retval == 0) { 780 dev_dbg(udc_dev(dum), 781 "dequeued req %p from %s, len %d buf %p\n", 782 req, _ep->name, _req->length, _req->buf); 783 usb_gadget_giveback_request(_ep, _req); 784 } 785 local_irq_restore(flags); 786 return retval; 787 } 788 789 static int 790 dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) 791 { 792 struct dummy_ep *ep; 793 struct dummy *dum; 794 795 if (!_ep) 796 return -EINVAL; 797 ep = usb_ep_to_dummy_ep(_ep); 798 dum = ep_to_dummy(ep); 799 if (!dum->driver) 800 return -ESHUTDOWN; 801 if (!value) 802 ep->halted = ep->wedged = 0; 803 else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && 804 !list_empty(&ep->queue)) 805 return -EAGAIN; 806 else { 807 ep->halted = 1; 808 if (wedged) 809 ep->wedged = 1; 810 } 811 /* FIXME clear emulated data toggle too */ 812 return 0; 813 } 814 815 static int 816 dummy_set_halt(struct usb_ep *_ep, int value) 817 { 818 return dummy_set_halt_and_wedge(_ep, value, 0); 819 } 820 821 static int dummy_set_wedge(struct usb_ep *_ep) 822 { 823 if (!_ep || _ep->name == ep0name) 824 return -EINVAL; 825 return dummy_set_halt_and_wedge(_ep, 1, 1); 826 } 827 828 static const struct usb_ep_ops dummy_ep_ops = { 829 .enable = dummy_enable, 830 .disable = dummy_disable, 831 832 .alloc_request = dummy_alloc_request, 833 .free_request = dummy_free_request, 834 835 .queue = dummy_queue, 836 .dequeue = dummy_dequeue, 837 838 .set_halt = dummy_set_halt, 839 .set_wedge = dummy_set_wedge, 840 }; 841 842 /*-------------------------------------------------------------------------*/ 843 844 /* there are both host and device side versions of this call ... */ 845 static int dummy_g_get_frame(struct usb_gadget *_gadget) 846 { 847 struct timespec64 ts64; 848 849 ktime_get_ts64(&ts64); 850 return ts64.tv_nsec / NSEC_PER_MSEC; 851 } 852 853 static int dummy_wakeup(struct usb_gadget *_gadget) 854 { 855 struct dummy_hcd *dum_hcd; 856 857 dum_hcd = gadget_to_dummy_hcd(_gadget); 858 if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE) 859 | (1 << USB_DEVICE_REMOTE_WAKEUP)))) 860 return -EINVAL; 861 if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0) 862 return -ENOLINK; 863 if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 && 864 dum_hcd->rh_state != DUMMY_RH_SUSPENDED) 865 return -EIO; 866 867 /* FIXME: What if the root hub is suspended but the port isn't? */ 868 869 /* hub notices our request, issues downstream resume, etc */ 870 dum_hcd->resuming = 1; 871 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20); 872 mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout); 873 return 0; 874 } 875 876 static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value) 877 { 878 struct dummy *dum; 879 880 _gadget->is_selfpowered = (value != 0); 881 dum = gadget_to_dummy_hcd(_gadget)->dum; 882 if (value) 883 dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED); 884 else 885 dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); 886 return 0; 887 } 888 889 static void dummy_udc_update_ep0(struct dummy *dum) 890 { 891 if (dum->gadget.speed == USB_SPEED_SUPER) 892 dum->ep[0].ep.maxpacket = 9; 893 else 894 dum->ep[0].ep.maxpacket = 64; 895 } 896 897 static int dummy_pullup(struct usb_gadget *_gadget, int value) 898 { 899 struct dummy_hcd *dum_hcd; 900 struct dummy *dum; 901 unsigned long flags; 902 903 dum = gadget_dev_to_dummy(&_gadget->dev); 904 dum_hcd = gadget_to_dummy_hcd(_gadget); 905 906 spin_lock_irqsave(&dum->lock, flags); 907 dum->pullup = (value != 0); 908 set_link_state(dum_hcd); 909 if (value == 0) { 910 /* 911 * Emulate synchronize_irq(): wait for callbacks to finish. 912 * This seems to be the best place to emulate the call to 913 * synchronize_irq() that's in usb_gadget_remove_driver(). 914 * Doing it in dummy_udc_stop() would be too late since it 915 * is called after the unbind callback and unbind shouldn't 916 * be invoked until all the other callbacks are finished. 917 */ 918 while (dum->callback_usage > 0) { 919 spin_unlock_irqrestore(&dum->lock, flags); 920 usleep_range(1000, 2000); 921 spin_lock_irqsave(&dum->lock, flags); 922 } 923 } 924 spin_unlock_irqrestore(&dum->lock, flags); 925 926 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); 927 return 0; 928 } 929 930 static void dummy_udc_set_speed(struct usb_gadget *_gadget, 931 enum usb_device_speed speed) 932 { 933 struct dummy *dum; 934 935 dum = gadget_dev_to_dummy(&_gadget->dev); 936 dum->gadget.speed = speed; 937 dummy_udc_update_ep0(dum); 938 } 939 940 static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable) 941 { 942 struct dummy *dum = gadget_dev_to_dummy(&_gadget->dev); 943 944 spin_lock_irq(&dum->lock); 945 dum->ints_enabled = enable; 946 spin_unlock_irq(&dum->lock); 947 } 948 949 static int dummy_udc_start(struct usb_gadget *g, 950 struct usb_gadget_driver *driver); 951 static int dummy_udc_stop(struct usb_gadget *g); 952 953 static const struct usb_gadget_ops dummy_ops = { 954 .get_frame = dummy_g_get_frame, 955 .wakeup = dummy_wakeup, 956 .set_selfpowered = dummy_set_selfpowered, 957 .pullup = dummy_pullup, 958 .udc_start = dummy_udc_start, 959 .udc_stop = dummy_udc_stop, 960 .udc_set_speed = dummy_udc_set_speed, 961 .udc_async_callbacks = dummy_udc_async_callbacks, 962 }; 963 964 /*-------------------------------------------------------------------------*/ 965 966 /* "function" sysfs attribute */ 967 static ssize_t function_show(struct device *dev, struct device_attribute *attr, 968 char *buf) 969 { 970 struct dummy *dum = gadget_dev_to_dummy(dev); 971 972 if (!dum->driver || !dum->driver->function) 973 return 0; 974 return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function); 975 } 976 static DEVICE_ATTR_RO(function); 977 978 /*-------------------------------------------------------------------------*/ 979 980 /* 981 * Driver registration/unregistration. 982 * 983 * This is basically hardware-specific; there's usually only one real USB 984 * device (not host) controller since that's how USB devices are intended 985 * to work. So most implementations of these api calls will rely on the 986 * fact that only one driver will ever bind to the hardware. But curious 987 * hardware can be built with discrete components, so the gadget API doesn't 988 * require that assumption. 989 * 990 * For this emulator, it might be convenient to create a usb device 991 * for each driver that registers: just add to a big root hub. 992 */ 993 994 static int dummy_udc_start(struct usb_gadget *g, 995 struct usb_gadget_driver *driver) 996 { 997 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); 998 struct dummy *dum = dum_hcd->dum; 999 1000 switch (g->speed) { 1001 /* All the speeds we support */ 1002 case USB_SPEED_LOW: 1003 case USB_SPEED_FULL: 1004 case USB_SPEED_HIGH: 1005 case USB_SPEED_SUPER: 1006 break; 1007 default: 1008 dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n", 1009 driver->max_speed); 1010 return -EINVAL; 1011 } 1012 1013 /* 1014 * DEVICE side init ... the layer above hardware, which 1015 * can't enumerate without help from the driver we're binding. 1016 */ 1017 1018 spin_lock_irq(&dum->lock); 1019 dum->devstatus = 0; 1020 dum->driver = driver; 1021 spin_unlock_irq(&dum->lock); 1022 1023 return 0; 1024 } 1025 1026 static int dummy_udc_stop(struct usb_gadget *g) 1027 { 1028 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); 1029 struct dummy *dum = dum_hcd->dum; 1030 1031 spin_lock_irq(&dum->lock); 1032 dum->ints_enabled = 0; 1033 stop_activity(dum); 1034 dum->driver = NULL; 1035 spin_unlock_irq(&dum->lock); 1036 1037 return 0; 1038 } 1039 1040 #undef is_enabled 1041 1042 /* The gadget structure is stored inside the hcd structure and will be 1043 * released along with it. */ 1044 static void init_dummy_udc_hw(struct dummy *dum) 1045 { 1046 int i; 1047 1048 INIT_LIST_HEAD(&dum->gadget.ep_list); 1049 for (i = 0; i < DUMMY_ENDPOINTS; i++) { 1050 struct dummy_ep *ep = &dum->ep[i]; 1051 1052 if (!ep_info[i].name) 1053 break; 1054 ep->ep.name = ep_info[i].name; 1055 ep->ep.caps = ep_info[i].caps; 1056 ep->ep.ops = &dummy_ep_ops; 1057 list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list); 1058 ep->halted = ep->wedged = ep->already_seen = 1059 ep->setup_stage = 0; 1060 usb_ep_set_maxpacket_limit(&ep->ep, ~0); 1061 ep->ep.max_streams = 16; 1062 ep->last_io = jiffies; 1063 ep->gadget = &dum->gadget; 1064 ep->desc = NULL; 1065 INIT_LIST_HEAD(&ep->queue); 1066 } 1067 1068 dum->gadget.ep0 = &dum->ep[0].ep; 1069 list_del_init(&dum->ep[0].ep.ep_list); 1070 INIT_LIST_HEAD(&dum->fifo_req.queue); 1071 1072 #ifdef CONFIG_USB_OTG 1073 dum->gadget.is_otg = 1; 1074 #endif 1075 } 1076 1077 static int dummy_udc_probe(struct platform_device *pdev) 1078 { 1079 struct dummy *dum; 1080 int rc; 1081 1082 dum = *((void **)dev_get_platdata(&pdev->dev)); 1083 /* Clear usb_gadget region for new registration to udc-core */ 1084 memzero_explicit(&dum->gadget, sizeof(struct usb_gadget)); 1085 dum->gadget.name = gadget_name; 1086 dum->gadget.ops = &dummy_ops; 1087 if (mod_data.is_super_speed) 1088 dum->gadget.max_speed = USB_SPEED_SUPER; 1089 else if (mod_data.is_high_speed) 1090 dum->gadget.max_speed = USB_SPEED_HIGH; 1091 else 1092 dum->gadget.max_speed = USB_SPEED_FULL; 1093 1094 dum->gadget.dev.parent = &pdev->dev; 1095 init_dummy_udc_hw(dum); 1096 1097 rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget); 1098 if (rc < 0) 1099 goto err_udc; 1100 1101 rc = device_create_file(&dum->gadget.dev, &dev_attr_function); 1102 if (rc < 0) 1103 goto err_dev; 1104 platform_set_drvdata(pdev, dum); 1105 return rc; 1106 1107 err_dev: 1108 usb_del_gadget_udc(&dum->gadget); 1109 err_udc: 1110 return rc; 1111 } 1112 1113 static void dummy_udc_remove(struct platform_device *pdev) 1114 { 1115 struct dummy *dum = platform_get_drvdata(pdev); 1116 1117 device_remove_file(&dum->gadget.dev, &dev_attr_function); 1118 usb_del_gadget_udc(&dum->gadget); 1119 } 1120 1121 static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd, 1122 int suspend) 1123 { 1124 spin_lock_irq(&dum->lock); 1125 dum->udc_suspended = suspend; 1126 set_link_state(dum_hcd); 1127 spin_unlock_irq(&dum->lock); 1128 } 1129 1130 static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state) 1131 { 1132 struct dummy *dum = platform_get_drvdata(pdev); 1133 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 1134 1135 dev_dbg(&pdev->dev, "%s\n", __func__); 1136 dummy_udc_pm(dum, dum_hcd, 1); 1137 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); 1138 return 0; 1139 } 1140 1141 static int dummy_udc_resume(struct platform_device *pdev) 1142 { 1143 struct dummy *dum = platform_get_drvdata(pdev); 1144 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 1145 1146 dev_dbg(&pdev->dev, "%s\n", __func__); 1147 dummy_udc_pm(dum, dum_hcd, 0); 1148 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); 1149 return 0; 1150 } 1151 1152 static struct platform_driver dummy_udc_driver = { 1153 .probe = dummy_udc_probe, 1154 .remove_new = dummy_udc_remove, 1155 .suspend = dummy_udc_suspend, 1156 .resume = dummy_udc_resume, 1157 .driver = { 1158 .name = gadget_name, 1159 }, 1160 }; 1161 1162 /*-------------------------------------------------------------------------*/ 1163 1164 static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc) 1165 { 1166 unsigned int index; 1167 1168 index = usb_endpoint_num(desc) << 1; 1169 if (usb_endpoint_dir_in(desc)) 1170 index |= 1; 1171 return index; 1172 } 1173 1174 /* HOST SIDE DRIVER 1175 * 1176 * this uses the hcd framework to hook up to host side drivers. 1177 * its root hub will only have one device, otherwise it acts like 1178 * a normal host controller. 1179 * 1180 * when urbs are queued, they're just stuck on a list that we 1181 * scan in a timer callback. that callback connects writes from 1182 * the host with reads from the device, and so on, based on the 1183 * usb 2.0 rules. 1184 */ 1185 1186 static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb) 1187 { 1188 const struct usb_endpoint_descriptor *desc = &urb->ep->desc; 1189 u32 index; 1190 1191 if (!usb_endpoint_xfer_bulk(desc)) 1192 return 0; 1193 1194 index = dummy_get_ep_idx(desc); 1195 return (1 << index) & dum_hcd->stream_en_ep; 1196 } 1197 1198 /* 1199 * The max stream number is saved as a nibble so for the 30 possible endpoints 1200 * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0 1201 * means we use only 1 stream). The maximum according to the spec is 16bit so 1202 * if the 16 stream limit is about to go, the array size should be incremented 1203 * to 30 elements of type u16. 1204 */ 1205 static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd, 1206 unsigned int pipe) 1207 { 1208 int max_streams; 1209 1210 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; 1211 if (usb_pipeout(pipe)) 1212 max_streams >>= 4; 1213 else 1214 max_streams &= 0xf; 1215 max_streams++; 1216 return max_streams; 1217 } 1218 1219 static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd, 1220 unsigned int pipe, unsigned int streams) 1221 { 1222 int max_streams; 1223 1224 streams--; 1225 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; 1226 if (usb_pipeout(pipe)) { 1227 streams <<= 4; 1228 max_streams &= 0xf; 1229 } else { 1230 max_streams &= 0xf0; 1231 } 1232 max_streams |= streams; 1233 dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams; 1234 } 1235 1236 static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb) 1237 { 1238 unsigned int max_streams; 1239 int enabled; 1240 1241 enabled = dummy_ep_stream_en(dum_hcd, urb); 1242 if (!urb->stream_id) { 1243 if (enabled) 1244 return -EINVAL; 1245 return 0; 1246 } 1247 if (!enabled) 1248 return -EINVAL; 1249 1250 max_streams = get_max_streams_for_pipe(dum_hcd, 1251 usb_pipeendpoint(urb->pipe)); 1252 if (urb->stream_id > max_streams) { 1253 dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n", 1254 urb->stream_id); 1255 BUG(); 1256 return -EINVAL; 1257 } 1258 return 0; 1259 } 1260 1261 static int dummy_urb_enqueue( 1262 struct usb_hcd *hcd, 1263 struct urb *urb, 1264 gfp_t mem_flags 1265 ) { 1266 struct dummy_hcd *dum_hcd; 1267 struct urbp *urbp; 1268 unsigned long flags; 1269 int rc; 1270 1271 urbp = kmalloc(sizeof *urbp, mem_flags); 1272 if (!urbp) 1273 return -ENOMEM; 1274 urbp->urb = urb; 1275 urbp->miter_started = 0; 1276 1277 dum_hcd = hcd_to_dummy_hcd(hcd); 1278 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 1279 1280 rc = dummy_validate_stream(dum_hcd, urb); 1281 if (rc) { 1282 kfree(urbp); 1283 goto done; 1284 } 1285 1286 rc = usb_hcd_link_urb_to_ep(hcd, urb); 1287 if (rc) { 1288 kfree(urbp); 1289 goto done; 1290 } 1291 1292 if (!dum_hcd->udev) { 1293 dum_hcd->udev = urb->dev; 1294 usb_get_dev(dum_hcd->udev); 1295 } else if (unlikely(dum_hcd->udev != urb->dev)) 1296 dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n"); 1297 1298 list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list); 1299 urb->hcpriv = urbp; 1300 if (!dum_hcd->next_frame_urbp) 1301 dum_hcd->next_frame_urbp = urbp; 1302 if (usb_pipetype(urb->pipe) == PIPE_CONTROL) 1303 urb->error_count = 1; /* mark as a new urb */ 1304 1305 /* kick the scheduler, it'll do the rest */ 1306 if (!hrtimer_active(&dum_hcd->timer)) 1307 hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS), 1308 HRTIMER_MODE_REL_SOFT); 1309 1310 done: 1311 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 1312 return rc; 1313 } 1314 1315 static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) 1316 { 1317 struct dummy_hcd *dum_hcd; 1318 unsigned long flags; 1319 int rc; 1320 1321 /* giveback happens automatically in timer callback, 1322 * so make sure the callback happens */ 1323 dum_hcd = hcd_to_dummy_hcd(hcd); 1324 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 1325 1326 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 1327 if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING && 1328 !list_empty(&dum_hcd->urbp_list)) 1329 hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT); 1330 1331 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 1332 return rc; 1333 } 1334 1335 static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req, 1336 u32 len) 1337 { 1338 void *ubuf, *rbuf; 1339 struct urbp *urbp = urb->hcpriv; 1340 int to_host; 1341 struct sg_mapping_iter *miter = &urbp->miter; 1342 u32 trans = 0; 1343 u32 this_sg; 1344 bool next_sg; 1345 1346 to_host = usb_urb_dir_in(urb); 1347 rbuf = req->req.buf + req->req.actual; 1348 1349 if (!urb->num_sgs) { 1350 ubuf = urb->transfer_buffer + urb->actual_length; 1351 if (to_host) 1352 memcpy(ubuf, rbuf, len); 1353 else 1354 memcpy(rbuf, ubuf, len); 1355 return len; 1356 } 1357 1358 if (!urbp->miter_started) { 1359 u32 flags = SG_MITER_ATOMIC; 1360 1361 if (to_host) 1362 flags |= SG_MITER_TO_SG; 1363 else 1364 flags |= SG_MITER_FROM_SG; 1365 1366 sg_miter_start(miter, urb->sg, urb->num_sgs, flags); 1367 urbp->miter_started = 1; 1368 } 1369 next_sg = sg_miter_next(miter); 1370 if (next_sg == false) { 1371 WARN_ON_ONCE(1); 1372 return -EINVAL; 1373 } 1374 do { 1375 ubuf = miter->addr; 1376 this_sg = min_t(u32, len, miter->length); 1377 miter->consumed = this_sg; 1378 trans += this_sg; 1379 1380 if (to_host) 1381 memcpy(ubuf, rbuf, this_sg); 1382 else 1383 memcpy(rbuf, ubuf, this_sg); 1384 len -= this_sg; 1385 1386 if (!len) 1387 break; 1388 next_sg = sg_miter_next(miter); 1389 if (next_sg == false) { 1390 WARN_ON_ONCE(1); 1391 return -EINVAL; 1392 } 1393 1394 rbuf += this_sg; 1395 } while (1); 1396 1397 sg_miter_stop(miter); 1398 return trans; 1399 } 1400 1401 /* transfer up to a frame's worth; caller must own lock */ 1402 static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb, 1403 struct dummy_ep *ep, int limit, int *status) 1404 { 1405 struct dummy *dum = dum_hcd->dum; 1406 struct dummy_request *req; 1407 int sent = 0; 1408 1409 top: 1410 /* if there's no request queued, the device is NAKing; return */ 1411 list_for_each_entry(req, &ep->queue, queue) { 1412 unsigned host_len, dev_len, len; 1413 int is_short, to_host; 1414 int rescan = 0; 1415 1416 if (dummy_ep_stream_en(dum_hcd, urb)) { 1417 if ((urb->stream_id != req->req.stream_id)) 1418 continue; 1419 } 1420 1421 /* 1..N packets of ep->ep.maxpacket each ... the last one 1422 * may be short (including zero length). 1423 * 1424 * writer can send a zlp explicitly (length 0) or implicitly 1425 * (length mod maxpacket zero, and 'zero' flag); they always 1426 * terminate reads. 1427 */ 1428 host_len = urb->transfer_buffer_length - urb->actual_length; 1429 dev_len = req->req.length - req->req.actual; 1430 len = min(host_len, dev_len); 1431 1432 /* FIXME update emulated data toggle too */ 1433 1434 to_host = usb_urb_dir_in(urb); 1435 if (unlikely(len == 0)) 1436 is_short = 1; 1437 else { 1438 /* not enough bandwidth left? */ 1439 if (limit < ep->ep.maxpacket && limit < len) 1440 break; 1441 len = min_t(unsigned, len, limit); 1442 if (len == 0) 1443 break; 1444 1445 /* send multiple of maxpacket first, then remainder */ 1446 if (len >= ep->ep.maxpacket) { 1447 is_short = 0; 1448 if (len % ep->ep.maxpacket) 1449 rescan = 1; 1450 len -= len % ep->ep.maxpacket; 1451 } else { 1452 is_short = 1; 1453 } 1454 1455 len = dummy_perform_transfer(urb, req, len); 1456 1457 ep->last_io = jiffies; 1458 if ((int)len < 0) { 1459 req->req.status = len; 1460 } else { 1461 limit -= len; 1462 sent += len; 1463 urb->actual_length += len; 1464 req->req.actual += len; 1465 } 1466 } 1467 1468 /* short packets terminate, maybe with overflow/underflow. 1469 * it's only really an error to write too much. 1470 * 1471 * partially filling a buffer optionally blocks queue advances 1472 * (so completion handlers can clean up the queue) but we don't 1473 * need to emulate such data-in-flight. 1474 */ 1475 if (is_short) { 1476 if (host_len == dev_len) { 1477 req->req.status = 0; 1478 *status = 0; 1479 } else if (to_host) { 1480 req->req.status = 0; 1481 if (dev_len > host_len) 1482 *status = -EOVERFLOW; 1483 else 1484 *status = 0; 1485 } else { 1486 *status = 0; 1487 if (host_len > dev_len) 1488 req->req.status = -EOVERFLOW; 1489 else 1490 req->req.status = 0; 1491 } 1492 1493 /* 1494 * many requests terminate without a short packet. 1495 * send a zlp if demanded by flags. 1496 */ 1497 } else { 1498 if (req->req.length == req->req.actual) { 1499 if (req->req.zero && to_host) 1500 rescan = 1; 1501 else 1502 req->req.status = 0; 1503 } 1504 if (urb->transfer_buffer_length == urb->actual_length) { 1505 if (urb->transfer_flags & URB_ZERO_PACKET && 1506 !to_host) 1507 rescan = 1; 1508 else 1509 *status = 0; 1510 } 1511 } 1512 1513 /* device side completion --> continuable */ 1514 if (req->req.status != -EINPROGRESS) { 1515 list_del_init(&req->queue); 1516 1517 spin_unlock(&dum->lock); 1518 usb_gadget_giveback_request(&ep->ep, &req->req); 1519 spin_lock(&dum->lock); 1520 1521 /* requests might have been unlinked... */ 1522 rescan = 1; 1523 } 1524 1525 /* host side completion --> terminate */ 1526 if (*status != -EINPROGRESS) 1527 break; 1528 1529 /* rescan to continue with any other queued i/o */ 1530 if (rescan) 1531 goto top; 1532 } 1533 return sent; 1534 } 1535 1536 static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep) 1537 { 1538 int limit = ep->ep.maxpacket; 1539 1540 if (dum->gadget.speed == USB_SPEED_HIGH) { 1541 int tmp; 1542 1543 /* high bandwidth mode */ 1544 tmp = usb_endpoint_maxp_mult(ep->desc); 1545 tmp *= 8 /* applies to entire frame */; 1546 limit += limit * tmp; 1547 } 1548 if (dum->gadget.speed == USB_SPEED_SUPER) { 1549 switch (usb_endpoint_type(ep->desc)) { 1550 case USB_ENDPOINT_XFER_ISOC: 1551 /* Sec. 4.4.8.2 USB3.0 Spec */ 1552 limit = 3 * 16 * 1024 * 8; 1553 break; 1554 case USB_ENDPOINT_XFER_INT: 1555 /* Sec. 4.4.7.2 USB3.0 Spec */ 1556 limit = 3 * 1024 * 8; 1557 break; 1558 case USB_ENDPOINT_XFER_BULK: 1559 default: 1560 break; 1561 } 1562 } 1563 return limit; 1564 } 1565 1566 #define is_active(dum_hcd) ((dum_hcd->port_status & \ 1567 (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \ 1568 USB_PORT_STAT_SUSPEND)) \ 1569 == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) 1570 1571 static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address) 1572 { 1573 int i; 1574 1575 if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ? 1576 dum->ss_hcd : dum->hs_hcd))) 1577 return NULL; 1578 if (!dum->ints_enabled) 1579 return NULL; 1580 if ((address & ~USB_DIR_IN) == 0) 1581 return &dum->ep[0]; 1582 for (i = 1; i < DUMMY_ENDPOINTS; i++) { 1583 struct dummy_ep *ep = &dum->ep[i]; 1584 1585 if (!ep->desc) 1586 continue; 1587 if (ep->desc->bEndpointAddress == address) 1588 return ep; 1589 } 1590 return NULL; 1591 } 1592 1593 #undef is_active 1594 1595 #define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE) 1596 #define Dev_InRequest (Dev_Request | USB_DIR_IN) 1597 #define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE) 1598 #define Intf_InRequest (Intf_Request | USB_DIR_IN) 1599 #define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) 1600 #define Ep_InRequest (Ep_Request | USB_DIR_IN) 1601 1602 1603 /** 1604 * handle_control_request() - handles all control transfers 1605 * @dum_hcd: pointer to dummy (the_controller) 1606 * @urb: the urb request to handle 1607 * @setup: pointer to the setup data for a USB device control 1608 * request 1609 * @status: pointer to request handling status 1610 * 1611 * Return 0 - if the request was handled 1612 * 1 - if the request wasn't handles 1613 * error code on error 1614 */ 1615 static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, 1616 struct usb_ctrlrequest *setup, 1617 int *status) 1618 { 1619 struct dummy_ep *ep2; 1620 struct dummy *dum = dum_hcd->dum; 1621 int ret_val = 1; 1622 unsigned w_index; 1623 unsigned w_value; 1624 1625 w_index = le16_to_cpu(setup->wIndex); 1626 w_value = le16_to_cpu(setup->wValue); 1627 switch (setup->bRequest) { 1628 case USB_REQ_SET_ADDRESS: 1629 if (setup->bRequestType != Dev_Request) 1630 break; 1631 dum->address = w_value; 1632 *status = 0; 1633 dev_dbg(udc_dev(dum), "set_address = %d\n", 1634 w_value); 1635 ret_val = 0; 1636 break; 1637 case USB_REQ_SET_FEATURE: 1638 if (setup->bRequestType == Dev_Request) { 1639 ret_val = 0; 1640 switch (w_value) { 1641 case USB_DEVICE_REMOTE_WAKEUP: 1642 break; 1643 case USB_DEVICE_B_HNP_ENABLE: 1644 dum->gadget.b_hnp_enable = 1; 1645 break; 1646 case USB_DEVICE_A_HNP_SUPPORT: 1647 dum->gadget.a_hnp_support = 1; 1648 break; 1649 case USB_DEVICE_A_ALT_HNP_SUPPORT: 1650 dum->gadget.a_alt_hnp_support = 1; 1651 break; 1652 case USB_DEVICE_U1_ENABLE: 1653 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1654 HCD_USB3) 1655 w_value = USB_DEV_STAT_U1_ENABLED; 1656 else 1657 ret_val = -EOPNOTSUPP; 1658 break; 1659 case USB_DEVICE_U2_ENABLE: 1660 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1661 HCD_USB3) 1662 w_value = USB_DEV_STAT_U2_ENABLED; 1663 else 1664 ret_val = -EOPNOTSUPP; 1665 break; 1666 case USB_DEVICE_LTM_ENABLE: 1667 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1668 HCD_USB3) 1669 w_value = USB_DEV_STAT_LTM_ENABLED; 1670 else 1671 ret_val = -EOPNOTSUPP; 1672 break; 1673 default: 1674 ret_val = -EOPNOTSUPP; 1675 } 1676 if (ret_val == 0) { 1677 dum->devstatus |= (1 << w_value); 1678 *status = 0; 1679 } 1680 } else if (setup->bRequestType == Ep_Request) { 1681 /* endpoint halt */ 1682 ep2 = find_endpoint(dum, w_index); 1683 if (!ep2 || ep2->ep.name == ep0name) { 1684 ret_val = -EOPNOTSUPP; 1685 break; 1686 } 1687 ep2->halted = 1; 1688 ret_val = 0; 1689 *status = 0; 1690 } 1691 break; 1692 case USB_REQ_CLEAR_FEATURE: 1693 if (setup->bRequestType == Dev_Request) { 1694 ret_val = 0; 1695 switch (w_value) { 1696 case USB_DEVICE_REMOTE_WAKEUP: 1697 w_value = USB_DEVICE_REMOTE_WAKEUP; 1698 break; 1699 case USB_DEVICE_U1_ENABLE: 1700 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1701 HCD_USB3) 1702 w_value = USB_DEV_STAT_U1_ENABLED; 1703 else 1704 ret_val = -EOPNOTSUPP; 1705 break; 1706 case USB_DEVICE_U2_ENABLE: 1707 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1708 HCD_USB3) 1709 w_value = USB_DEV_STAT_U2_ENABLED; 1710 else 1711 ret_val = -EOPNOTSUPP; 1712 break; 1713 case USB_DEVICE_LTM_ENABLE: 1714 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1715 HCD_USB3) 1716 w_value = USB_DEV_STAT_LTM_ENABLED; 1717 else 1718 ret_val = -EOPNOTSUPP; 1719 break; 1720 default: 1721 ret_val = -EOPNOTSUPP; 1722 break; 1723 } 1724 if (ret_val == 0) { 1725 dum->devstatus &= ~(1 << w_value); 1726 *status = 0; 1727 } 1728 } else if (setup->bRequestType == Ep_Request) { 1729 /* endpoint halt */ 1730 ep2 = find_endpoint(dum, w_index); 1731 if (!ep2) { 1732 ret_val = -EOPNOTSUPP; 1733 break; 1734 } 1735 if (!ep2->wedged) 1736 ep2->halted = 0; 1737 ret_val = 0; 1738 *status = 0; 1739 } 1740 break; 1741 case USB_REQ_GET_STATUS: 1742 if (setup->bRequestType == Dev_InRequest 1743 || setup->bRequestType == Intf_InRequest 1744 || setup->bRequestType == Ep_InRequest) { 1745 char *buf; 1746 /* 1747 * device: remote wakeup, selfpowered 1748 * interface: nothing 1749 * endpoint: halt 1750 */ 1751 buf = (char *)urb->transfer_buffer; 1752 if (urb->transfer_buffer_length > 0) { 1753 if (setup->bRequestType == Ep_InRequest) { 1754 ep2 = find_endpoint(dum, w_index); 1755 if (!ep2) { 1756 ret_val = -EOPNOTSUPP; 1757 break; 1758 } 1759 buf[0] = ep2->halted; 1760 } else if (setup->bRequestType == 1761 Dev_InRequest) { 1762 buf[0] = (u8)dum->devstatus; 1763 } else 1764 buf[0] = 0; 1765 } 1766 if (urb->transfer_buffer_length > 1) 1767 buf[1] = 0; 1768 urb->actual_length = min_t(u32, 2, 1769 urb->transfer_buffer_length); 1770 ret_val = 0; 1771 *status = 0; 1772 } 1773 break; 1774 } 1775 return ret_val; 1776 } 1777 1778 /* 1779 * Drive both sides of the transfers; looks like irq handlers to both 1780 * drivers except that the callbacks are invoked from soft interrupt 1781 * context. 1782 */ 1783 static enum hrtimer_restart dummy_timer(struct hrtimer *t) 1784 { 1785 struct dummy_hcd *dum_hcd = from_timer(dum_hcd, t, timer); 1786 struct dummy *dum = dum_hcd->dum; 1787 struct urbp *urbp, *tmp; 1788 unsigned long flags; 1789 int limit, total; 1790 int i; 1791 1792 /* simplistic model for one frame's bandwidth */ 1793 /* FIXME: account for transaction and packet overhead */ 1794 switch (dum->gadget.speed) { 1795 case USB_SPEED_LOW: 1796 total = 8/*bytes*/ * 12/*packets*/; 1797 break; 1798 case USB_SPEED_FULL: 1799 total = 64/*bytes*/ * 19/*packets*/; 1800 break; 1801 case USB_SPEED_HIGH: 1802 total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; 1803 break; 1804 case USB_SPEED_SUPER: 1805 /* Bus speed is 500000 bytes/ms, so use a little less */ 1806 total = 490000; 1807 break; 1808 default: /* Can't happen */ 1809 dev_err(dummy_dev(dum_hcd), "bogus device speed\n"); 1810 total = 0; 1811 break; 1812 } 1813 1814 /* look at each urb queued by the host side driver */ 1815 spin_lock_irqsave(&dum->lock, flags); 1816 1817 if (!dum_hcd->udev) { 1818 dev_err(dummy_dev(dum_hcd), 1819 "timer fired with no URBs pending?\n"); 1820 spin_unlock_irqrestore(&dum->lock, flags); 1821 return HRTIMER_NORESTART; 1822 } 1823 dum_hcd->next_frame_urbp = NULL; 1824 1825 for (i = 0; i < DUMMY_ENDPOINTS; i++) { 1826 if (!ep_info[i].name) 1827 break; 1828 dum->ep[i].already_seen = 0; 1829 } 1830 1831 restart: 1832 list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) { 1833 struct urb *urb; 1834 struct dummy_request *req; 1835 u8 address; 1836 struct dummy_ep *ep = NULL; 1837 int status = -EINPROGRESS; 1838 1839 /* stop when we reach URBs queued after the timer interrupt */ 1840 if (urbp == dum_hcd->next_frame_urbp) 1841 break; 1842 1843 urb = urbp->urb; 1844 if (urb->unlinked) 1845 goto return_urb; 1846 else if (dum_hcd->rh_state != DUMMY_RH_RUNNING) 1847 continue; 1848 1849 /* Used up this frame's bandwidth? */ 1850 if (total <= 0) 1851 continue; 1852 1853 /* find the gadget's ep for this request (if configured) */ 1854 address = usb_pipeendpoint (urb->pipe); 1855 if (usb_urb_dir_in(urb)) 1856 address |= USB_DIR_IN; 1857 ep = find_endpoint(dum, address); 1858 if (!ep) { 1859 /* set_configuration() disagreement */ 1860 dev_dbg(dummy_dev(dum_hcd), 1861 "no ep configured for urb %p\n", 1862 urb); 1863 status = -EPROTO; 1864 goto return_urb; 1865 } 1866 1867 if (ep->already_seen) 1868 continue; 1869 ep->already_seen = 1; 1870 if (ep == &dum->ep[0] && urb->error_count) { 1871 ep->setup_stage = 1; /* a new urb */ 1872 urb->error_count = 0; 1873 } 1874 if (ep->halted && !ep->setup_stage) { 1875 /* NOTE: must not be iso! */ 1876 dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n", 1877 ep->ep.name, urb); 1878 status = -EPIPE; 1879 goto return_urb; 1880 } 1881 /* FIXME make sure both ends agree on maxpacket */ 1882 1883 /* handle control requests */ 1884 if (ep == &dum->ep[0] && ep->setup_stage) { 1885 struct usb_ctrlrequest setup; 1886 int value; 1887 1888 setup = *(struct usb_ctrlrequest *) urb->setup_packet; 1889 /* paranoia, in case of stale queued data */ 1890 list_for_each_entry(req, &ep->queue, queue) { 1891 list_del_init(&req->queue); 1892 req->req.status = -EOVERFLOW; 1893 dev_dbg(udc_dev(dum), "stale req = %p\n", 1894 req); 1895 1896 spin_unlock(&dum->lock); 1897 usb_gadget_giveback_request(&ep->ep, &req->req); 1898 spin_lock(&dum->lock); 1899 ep->already_seen = 0; 1900 goto restart; 1901 } 1902 1903 /* gadget driver never sees set_address or operations 1904 * on standard feature flags. some hardware doesn't 1905 * even expose them. 1906 */ 1907 ep->last_io = jiffies; 1908 ep->setup_stage = 0; 1909 ep->halted = 0; 1910 1911 value = handle_control_request(dum_hcd, urb, &setup, 1912 &status); 1913 1914 /* gadget driver handles all other requests. block 1915 * until setup() returns; no reentrancy issues etc. 1916 */ 1917 if (value > 0) { 1918 ++dum->callback_usage; 1919 spin_unlock(&dum->lock); 1920 value = dum->driver->setup(&dum->gadget, 1921 &setup); 1922 spin_lock(&dum->lock); 1923 --dum->callback_usage; 1924 1925 if (value >= 0) { 1926 /* no delays (max 64KB data stage) */ 1927 limit = 64*1024; 1928 goto treat_control_like_bulk; 1929 } 1930 /* error, see below */ 1931 } 1932 1933 if (value < 0) { 1934 if (value != -EOPNOTSUPP) 1935 dev_dbg(udc_dev(dum), 1936 "setup --> %d\n", 1937 value); 1938 status = -EPIPE; 1939 urb->actual_length = 0; 1940 } 1941 1942 goto return_urb; 1943 } 1944 1945 /* non-control requests */ 1946 limit = total; 1947 switch (usb_pipetype(urb->pipe)) { 1948 case PIPE_ISOCHRONOUS: 1949 /* 1950 * We don't support isochronous. But if we did, 1951 * here are some of the issues we'd have to face: 1952 * 1953 * Is it urb->interval since the last xfer? 1954 * Use urb->iso_frame_desc[i]. 1955 * Complete whether or not ep has requests queued. 1956 * Report random errors, to debug drivers. 1957 */ 1958 limit = max(limit, periodic_bytes(dum, ep)); 1959 status = -EINVAL; /* fail all xfers */ 1960 break; 1961 1962 case PIPE_INTERRUPT: 1963 /* FIXME is it urb->interval since the last xfer? 1964 * this almost certainly polls too fast. 1965 */ 1966 limit = max(limit, periodic_bytes(dum, ep)); 1967 fallthrough; 1968 1969 default: 1970 treat_control_like_bulk: 1971 ep->last_io = jiffies; 1972 total -= transfer(dum_hcd, urb, ep, limit, &status); 1973 break; 1974 } 1975 1976 /* incomplete transfer? */ 1977 if (status == -EINPROGRESS) 1978 continue; 1979 1980 return_urb: 1981 list_del(&urbp->urbp_list); 1982 kfree(urbp); 1983 if (ep) 1984 ep->already_seen = ep->setup_stage = 0; 1985 1986 usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb); 1987 spin_unlock(&dum->lock); 1988 usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status); 1989 spin_lock(&dum->lock); 1990 1991 goto restart; 1992 } 1993 1994 if (list_empty(&dum_hcd->urbp_list)) { 1995 usb_put_dev(dum_hcd->udev); 1996 dum_hcd->udev = NULL; 1997 } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { 1998 /* want a 1 msec delay here */ 1999 hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS), 2000 HRTIMER_MODE_REL_SOFT); 2001 } 2002 2003 spin_unlock_irqrestore(&dum->lock, flags); 2004 2005 return HRTIMER_NORESTART; 2006 } 2007 2008 /*-------------------------------------------------------------------------*/ 2009 2010 #define PORT_C_MASK \ 2011 ((USB_PORT_STAT_C_CONNECTION \ 2012 | USB_PORT_STAT_C_ENABLE \ 2013 | USB_PORT_STAT_C_SUSPEND \ 2014 | USB_PORT_STAT_C_OVERCURRENT \ 2015 | USB_PORT_STAT_C_RESET) << 16) 2016 2017 static int dummy_hub_status(struct usb_hcd *hcd, char *buf) 2018 { 2019 struct dummy_hcd *dum_hcd; 2020 unsigned long flags; 2021 int retval = 0; 2022 2023 dum_hcd = hcd_to_dummy_hcd(hcd); 2024 2025 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2026 if (!HCD_HW_ACCESSIBLE(hcd)) 2027 goto done; 2028 2029 if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) { 2030 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); 2031 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; 2032 set_link_state(dum_hcd); 2033 } 2034 2035 if ((dum_hcd->port_status & PORT_C_MASK) != 0) { 2036 *buf = (1 << 1); 2037 dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n", 2038 dum_hcd->port_status); 2039 retval = 1; 2040 if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED) 2041 usb_hcd_resume_root_hub(hcd); 2042 } 2043 done: 2044 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2045 return retval; 2046 } 2047 2048 /* usb 3.0 root hub device descriptor */ 2049 static struct { 2050 struct usb_bos_descriptor bos; 2051 struct usb_ss_cap_descriptor ss_cap; 2052 } __packed usb3_bos_desc = { 2053 2054 .bos = { 2055 .bLength = USB_DT_BOS_SIZE, 2056 .bDescriptorType = USB_DT_BOS, 2057 .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), 2058 .bNumDeviceCaps = 1, 2059 }, 2060 .ss_cap = { 2061 .bLength = USB_DT_USB_SS_CAP_SIZE, 2062 .bDescriptorType = USB_DT_DEVICE_CAPABILITY, 2063 .bDevCapabilityType = USB_SS_CAP_TYPE, 2064 .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), 2065 .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), 2066 }, 2067 }; 2068 2069 static inline void 2070 ss_hub_descriptor(struct usb_hub_descriptor *desc) 2071 { 2072 memset(desc, 0, sizeof *desc); 2073 desc->bDescriptorType = USB_DT_SS_HUB; 2074 desc->bDescLength = 12; 2075 desc->wHubCharacteristics = cpu_to_le16( 2076 HUB_CHAR_INDV_PORT_LPSM | 2077 HUB_CHAR_COMMON_OCPM); 2078 desc->bNbrPorts = 1; 2079 desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ 2080 desc->u.ss.DeviceRemovable = 0; 2081 } 2082 2083 static inline void hub_descriptor(struct usb_hub_descriptor *desc) 2084 { 2085 memset(desc, 0, sizeof *desc); 2086 desc->bDescriptorType = USB_DT_HUB; 2087 desc->bDescLength = 9; 2088 desc->wHubCharacteristics = cpu_to_le16( 2089 HUB_CHAR_INDV_PORT_LPSM | 2090 HUB_CHAR_COMMON_OCPM); 2091 desc->bNbrPorts = 1; 2092 desc->u.hs.DeviceRemovable[0] = 0; 2093 desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */ 2094 } 2095 2096 static int dummy_hub_control( 2097 struct usb_hcd *hcd, 2098 u16 typeReq, 2099 u16 wValue, 2100 u16 wIndex, 2101 char *buf, 2102 u16 wLength 2103 ) { 2104 struct dummy_hcd *dum_hcd; 2105 int retval = 0; 2106 unsigned long flags; 2107 2108 if (!HCD_HW_ACCESSIBLE(hcd)) 2109 return -ETIMEDOUT; 2110 2111 dum_hcd = hcd_to_dummy_hcd(hcd); 2112 2113 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2114 switch (typeReq) { 2115 case ClearHubFeature: 2116 break; 2117 case ClearPortFeature: 2118 switch (wValue) { 2119 case USB_PORT_FEAT_SUSPEND: 2120 if (hcd->speed == HCD_USB3) { 2121 dev_dbg(dummy_dev(dum_hcd), 2122 "USB_PORT_FEAT_SUSPEND req not " 2123 "supported for USB 3.0 roothub\n"); 2124 goto error; 2125 } 2126 if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) { 2127 /* 20msec resume signaling */ 2128 dum_hcd->resuming = 1; 2129 dum_hcd->re_timeout = jiffies + 2130 msecs_to_jiffies(20); 2131 } 2132 break; 2133 case USB_PORT_FEAT_POWER: 2134 dev_dbg(dummy_dev(dum_hcd), "power-off\n"); 2135 if (hcd->speed == HCD_USB3) 2136 dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER; 2137 else 2138 dum_hcd->port_status &= ~USB_PORT_STAT_POWER; 2139 set_link_state(dum_hcd); 2140 break; 2141 case USB_PORT_FEAT_ENABLE: 2142 case USB_PORT_FEAT_C_ENABLE: 2143 case USB_PORT_FEAT_C_SUSPEND: 2144 /* Not allowed for USB-3 */ 2145 if (hcd->speed == HCD_USB3) 2146 goto error; 2147 fallthrough; 2148 case USB_PORT_FEAT_C_CONNECTION: 2149 case USB_PORT_FEAT_C_RESET: 2150 dum_hcd->port_status &= ~(1 << wValue); 2151 set_link_state(dum_hcd); 2152 break; 2153 default: 2154 /* Disallow INDICATOR and C_OVER_CURRENT */ 2155 goto error; 2156 } 2157 break; 2158 case GetHubDescriptor: 2159 if (hcd->speed == HCD_USB3 && 2160 (wLength < USB_DT_SS_HUB_SIZE || 2161 wValue != (USB_DT_SS_HUB << 8))) { 2162 dev_dbg(dummy_dev(dum_hcd), 2163 "Wrong hub descriptor type for " 2164 "USB 3.0 roothub.\n"); 2165 goto error; 2166 } 2167 if (hcd->speed == HCD_USB3) 2168 ss_hub_descriptor((struct usb_hub_descriptor *) buf); 2169 else 2170 hub_descriptor((struct usb_hub_descriptor *) buf); 2171 break; 2172 2173 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 2174 if (hcd->speed != HCD_USB3) 2175 goto error; 2176 2177 if ((wValue >> 8) != USB_DT_BOS) 2178 goto error; 2179 2180 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); 2181 retval = sizeof(usb3_bos_desc); 2182 break; 2183 2184 case GetHubStatus: 2185 *(__le32 *) buf = cpu_to_le32(0); 2186 break; 2187 case GetPortStatus: 2188 if (wIndex != 1) 2189 retval = -EPIPE; 2190 2191 /* whoever resets or resumes must GetPortStatus to 2192 * complete it!! 2193 */ 2194 if (dum_hcd->resuming && 2195 time_after_eq(jiffies, dum_hcd->re_timeout)) { 2196 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); 2197 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; 2198 } 2199 if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 && 2200 time_after_eq(jiffies, dum_hcd->re_timeout)) { 2201 dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16); 2202 dum_hcd->port_status &= ~USB_PORT_STAT_RESET; 2203 if (dum_hcd->dum->pullup) { 2204 dum_hcd->port_status |= USB_PORT_STAT_ENABLE; 2205 2206 if (hcd->speed < HCD_USB3) { 2207 switch (dum_hcd->dum->gadget.speed) { 2208 case USB_SPEED_HIGH: 2209 dum_hcd->port_status |= 2210 USB_PORT_STAT_HIGH_SPEED; 2211 break; 2212 case USB_SPEED_LOW: 2213 dum_hcd->dum->gadget.ep0-> 2214 maxpacket = 8; 2215 dum_hcd->port_status |= 2216 USB_PORT_STAT_LOW_SPEED; 2217 break; 2218 default: 2219 break; 2220 } 2221 } 2222 } 2223 } 2224 set_link_state(dum_hcd); 2225 ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status); 2226 ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16); 2227 break; 2228 case SetHubFeature: 2229 retval = -EPIPE; 2230 break; 2231 case SetPortFeature: 2232 switch (wValue) { 2233 case USB_PORT_FEAT_LINK_STATE: 2234 if (hcd->speed != HCD_USB3) { 2235 dev_dbg(dummy_dev(dum_hcd), 2236 "USB_PORT_FEAT_LINK_STATE req not " 2237 "supported for USB 2.0 roothub\n"); 2238 goto error; 2239 } 2240 /* 2241 * Since this is dummy we don't have an actual link so 2242 * there is nothing to do for the SET_LINK_STATE cmd 2243 */ 2244 break; 2245 case USB_PORT_FEAT_U1_TIMEOUT: 2246 case USB_PORT_FEAT_U2_TIMEOUT: 2247 /* TODO: add suspend/resume support! */ 2248 if (hcd->speed != HCD_USB3) { 2249 dev_dbg(dummy_dev(dum_hcd), 2250 "USB_PORT_FEAT_U1/2_TIMEOUT req not " 2251 "supported for USB 2.0 roothub\n"); 2252 goto error; 2253 } 2254 break; 2255 case USB_PORT_FEAT_SUSPEND: 2256 /* Applicable only for USB2.0 hub */ 2257 if (hcd->speed == HCD_USB3) { 2258 dev_dbg(dummy_dev(dum_hcd), 2259 "USB_PORT_FEAT_SUSPEND req not " 2260 "supported for USB 3.0 roothub\n"); 2261 goto error; 2262 } 2263 if (dum_hcd->active) { 2264 dum_hcd->port_status |= USB_PORT_STAT_SUSPEND; 2265 2266 /* HNP would happen here; for now we 2267 * assume b_bus_req is always true. 2268 */ 2269 set_link_state(dum_hcd); 2270 if (((1 << USB_DEVICE_B_HNP_ENABLE) 2271 & dum_hcd->dum->devstatus) != 0) 2272 dev_dbg(dummy_dev(dum_hcd), 2273 "no HNP yet!\n"); 2274 } 2275 break; 2276 case USB_PORT_FEAT_POWER: 2277 if (hcd->speed == HCD_USB3) 2278 dum_hcd->port_status |= USB_SS_PORT_STAT_POWER; 2279 else 2280 dum_hcd->port_status |= USB_PORT_STAT_POWER; 2281 set_link_state(dum_hcd); 2282 break; 2283 case USB_PORT_FEAT_BH_PORT_RESET: 2284 /* Applicable only for USB3.0 hub */ 2285 if (hcd->speed != HCD_USB3) { 2286 dev_dbg(dummy_dev(dum_hcd), 2287 "USB_PORT_FEAT_BH_PORT_RESET req not " 2288 "supported for USB 2.0 roothub\n"); 2289 goto error; 2290 } 2291 fallthrough; 2292 case USB_PORT_FEAT_RESET: 2293 if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION)) 2294 break; 2295 /* if it's already enabled, disable */ 2296 if (hcd->speed == HCD_USB3) { 2297 dum_hcd->port_status = 2298 (USB_SS_PORT_STAT_POWER | 2299 USB_PORT_STAT_CONNECTION | 2300 USB_PORT_STAT_RESET); 2301 } else { 2302 dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE 2303 | USB_PORT_STAT_LOW_SPEED 2304 | USB_PORT_STAT_HIGH_SPEED); 2305 dum_hcd->port_status |= USB_PORT_STAT_RESET; 2306 } 2307 /* 2308 * We want to reset device status. All but the 2309 * Self powered feature 2310 */ 2311 dum_hcd->dum->devstatus &= 2312 (1 << USB_DEVICE_SELF_POWERED); 2313 /* 2314 * FIXME USB3.0: what is the correct reset signaling 2315 * interval? Is it still 50msec as for HS? 2316 */ 2317 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); 2318 set_link_state(dum_hcd); 2319 break; 2320 case USB_PORT_FEAT_C_CONNECTION: 2321 case USB_PORT_FEAT_C_RESET: 2322 case USB_PORT_FEAT_C_ENABLE: 2323 case USB_PORT_FEAT_C_SUSPEND: 2324 /* Not allowed for USB-3, and ignored for USB-2 */ 2325 if (hcd->speed == HCD_USB3) 2326 goto error; 2327 break; 2328 default: 2329 /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ 2330 goto error; 2331 } 2332 break; 2333 case GetPortErrorCount: 2334 if (hcd->speed != HCD_USB3) { 2335 dev_dbg(dummy_dev(dum_hcd), 2336 "GetPortErrorCount req not " 2337 "supported for USB 2.0 roothub\n"); 2338 goto error; 2339 } 2340 /* We'll always return 0 since this is a dummy hub */ 2341 *(__le32 *) buf = cpu_to_le32(0); 2342 break; 2343 case SetHubDepth: 2344 if (hcd->speed != HCD_USB3) { 2345 dev_dbg(dummy_dev(dum_hcd), 2346 "SetHubDepth req not supported for " 2347 "USB 2.0 roothub\n"); 2348 goto error; 2349 } 2350 break; 2351 default: 2352 dev_dbg(dummy_dev(dum_hcd), 2353 "hub control req%04x v%04x i%04x l%d\n", 2354 typeReq, wValue, wIndex, wLength); 2355 error: 2356 /* "protocol stall" on error */ 2357 retval = -EPIPE; 2358 } 2359 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2360 2361 if ((dum_hcd->port_status & PORT_C_MASK) != 0) 2362 usb_hcd_poll_rh_status(hcd); 2363 return retval; 2364 } 2365 2366 static int dummy_bus_suspend(struct usb_hcd *hcd) 2367 { 2368 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2369 2370 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 2371 2372 spin_lock_irq(&dum_hcd->dum->lock); 2373 dum_hcd->rh_state = DUMMY_RH_SUSPENDED; 2374 set_link_state(dum_hcd); 2375 hcd->state = HC_STATE_SUSPENDED; 2376 spin_unlock_irq(&dum_hcd->dum->lock); 2377 return 0; 2378 } 2379 2380 static int dummy_bus_resume(struct usb_hcd *hcd) 2381 { 2382 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2383 int rc = 0; 2384 2385 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 2386 2387 spin_lock_irq(&dum_hcd->dum->lock); 2388 if (!HCD_HW_ACCESSIBLE(hcd)) { 2389 rc = -ESHUTDOWN; 2390 } else { 2391 dum_hcd->rh_state = DUMMY_RH_RUNNING; 2392 set_link_state(dum_hcd); 2393 if (!list_empty(&dum_hcd->urbp_list)) 2394 hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT); 2395 hcd->state = HC_STATE_RUNNING; 2396 } 2397 spin_unlock_irq(&dum_hcd->dum->lock); 2398 return rc; 2399 } 2400 2401 /*-------------------------------------------------------------------------*/ 2402 2403 static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb) 2404 { 2405 int ep = usb_pipeendpoint(urb->pipe); 2406 2407 return scnprintf(buf, size, 2408 "urb/%p %s ep%d%s%s len %d/%d\n", 2409 urb, 2410 ({ char *s; 2411 switch (urb->dev->speed) { 2412 case USB_SPEED_LOW: 2413 s = "ls"; 2414 break; 2415 case USB_SPEED_FULL: 2416 s = "fs"; 2417 break; 2418 case USB_SPEED_HIGH: 2419 s = "hs"; 2420 break; 2421 case USB_SPEED_SUPER: 2422 s = "ss"; 2423 break; 2424 default: 2425 s = "?"; 2426 break; 2427 } s; }), 2428 ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "", 2429 ({ char *s; \ 2430 switch (usb_pipetype(urb->pipe)) { \ 2431 case PIPE_CONTROL: \ 2432 s = ""; \ 2433 break; \ 2434 case PIPE_BULK: \ 2435 s = "-bulk"; \ 2436 break; \ 2437 case PIPE_INTERRUPT: \ 2438 s = "-int"; \ 2439 break; \ 2440 default: \ 2441 s = "-iso"; \ 2442 break; \ 2443 } s; }), 2444 urb->actual_length, urb->transfer_buffer_length); 2445 } 2446 2447 static ssize_t urbs_show(struct device *dev, struct device_attribute *attr, 2448 char *buf) 2449 { 2450 struct usb_hcd *hcd = dev_get_drvdata(dev); 2451 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2452 struct urbp *urbp; 2453 size_t size = 0; 2454 unsigned long flags; 2455 2456 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2457 list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) { 2458 size_t temp; 2459 2460 temp = show_urb(buf, PAGE_SIZE - size, urbp->urb); 2461 buf += temp; 2462 size += temp; 2463 } 2464 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2465 2466 return size; 2467 } 2468 static DEVICE_ATTR_RO(urbs); 2469 2470 static int dummy_start_ss(struct dummy_hcd *dum_hcd) 2471 { 2472 hrtimer_init(&dum_hcd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); 2473 dum_hcd->timer.function = dummy_timer; 2474 dum_hcd->rh_state = DUMMY_RH_RUNNING; 2475 dum_hcd->stream_en_ep = 0; 2476 INIT_LIST_HEAD(&dum_hcd->urbp_list); 2477 dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; 2478 dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; 2479 dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; 2480 #ifdef CONFIG_USB_OTG 2481 dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1; 2482 #endif 2483 return 0; 2484 2485 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ 2486 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); 2487 } 2488 2489 static int dummy_start(struct usb_hcd *hcd) 2490 { 2491 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2492 2493 /* 2494 * HOST side init ... we emulate a root hub that'll only ever 2495 * talk to one device (the gadget side). Also appears in sysfs, 2496 * just like more familiar pci-based HCDs. 2497 */ 2498 if (!usb_hcd_is_primary_hcd(hcd)) 2499 return dummy_start_ss(dum_hcd); 2500 2501 spin_lock_init(&dum_hcd->dum->lock); 2502 hrtimer_init(&dum_hcd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT); 2503 dum_hcd->timer.function = dummy_timer; 2504 dum_hcd->rh_state = DUMMY_RH_RUNNING; 2505 2506 INIT_LIST_HEAD(&dum_hcd->urbp_list); 2507 2508 hcd->power_budget = POWER_BUDGET; 2509 hcd->state = HC_STATE_RUNNING; 2510 hcd->uses_new_polling = 1; 2511 2512 #ifdef CONFIG_USB_OTG 2513 hcd->self.otg_port = 1; 2514 #endif 2515 2516 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ 2517 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); 2518 } 2519 2520 static void dummy_stop(struct usb_hcd *hcd) 2521 { 2522 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2523 2524 hrtimer_cancel(&dum_hcd->timer); 2525 device_remove_file(dummy_dev(dum_hcd), &dev_attr_urbs); 2526 dev_info(dummy_dev(dum_hcd), "stopped\n"); 2527 } 2528 2529 /*-------------------------------------------------------------------------*/ 2530 2531 static int dummy_h_get_frame(struct usb_hcd *hcd) 2532 { 2533 return dummy_g_get_frame(NULL); 2534 } 2535 2536 static int dummy_setup(struct usb_hcd *hcd) 2537 { 2538 struct dummy *dum; 2539 2540 dum = *((void **)dev_get_platdata(hcd->self.controller)); 2541 hcd->self.sg_tablesize = ~0; 2542 if (usb_hcd_is_primary_hcd(hcd)) { 2543 dum->hs_hcd = hcd_to_dummy_hcd(hcd); 2544 dum->hs_hcd->dum = dum; 2545 /* 2546 * Mark the first roothub as being USB 2.0. 2547 * The USB 3.0 roothub will be registered later by 2548 * dummy_hcd_probe() 2549 */ 2550 hcd->speed = HCD_USB2; 2551 hcd->self.root_hub->speed = USB_SPEED_HIGH; 2552 } else { 2553 dum->ss_hcd = hcd_to_dummy_hcd(hcd); 2554 dum->ss_hcd->dum = dum; 2555 hcd->speed = HCD_USB3; 2556 hcd->self.root_hub->speed = USB_SPEED_SUPER; 2557 } 2558 return 0; 2559 } 2560 2561 /* Change a group of bulk endpoints to support multiple stream IDs */ 2562 static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, 2563 struct usb_host_endpoint **eps, unsigned int num_eps, 2564 unsigned int num_streams, gfp_t mem_flags) 2565 { 2566 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2567 unsigned long flags; 2568 int max_stream; 2569 int ret_streams = num_streams; 2570 unsigned int index; 2571 unsigned int i; 2572 2573 if (!num_eps) 2574 return -EINVAL; 2575 2576 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2577 for (i = 0; i < num_eps; i++) { 2578 index = dummy_get_ep_idx(&eps[i]->desc); 2579 if ((1 << index) & dum_hcd->stream_en_ep) { 2580 ret_streams = -EINVAL; 2581 goto out; 2582 } 2583 max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp); 2584 if (!max_stream) { 2585 ret_streams = -EINVAL; 2586 goto out; 2587 } 2588 if (max_stream < ret_streams) { 2589 dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u " 2590 "stream IDs.\n", 2591 eps[i]->desc.bEndpointAddress, 2592 max_stream); 2593 ret_streams = max_stream; 2594 } 2595 } 2596 2597 for (i = 0; i < num_eps; i++) { 2598 index = dummy_get_ep_idx(&eps[i]->desc); 2599 dum_hcd->stream_en_ep |= 1 << index; 2600 set_max_streams_for_pipe(dum_hcd, 2601 usb_endpoint_num(&eps[i]->desc), ret_streams); 2602 } 2603 out: 2604 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2605 return ret_streams; 2606 } 2607 2608 /* Reverts a group of bulk endpoints back to not using stream IDs. */ 2609 static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev, 2610 struct usb_host_endpoint **eps, unsigned int num_eps, 2611 gfp_t mem_flags) 2612 { 2613 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2614 unsigned long flags; 2615 int ret; 2616 unsigned int index; 2617 unsigned int i; 2618 2619 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2620 for (i = 0; i < num_eps; i++) { 2621 index = dummy_get_ep_idx(&eps[i]->desc); 2622 if (!((1 << index) & dum_hcd->stream_en_ep)) { 2623 ret = -EINVAL; 2624 goto out; 2625 } 2626 } 2627 2628 for (i = 0; i < num_eps; i++) { 2629 index = dummy_get_ep_idx(&eps[i]->desc); 2630 dum_hcd->stream_en_ep &= ~(1 << index); 2631 set_max_streams_for_pipe(dum_hcd, 2632 usb_endpoint_num(&eps[i]->desc), 0); 2633 } 2634 ret = 0; 2635 out: 2636 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2637 return ret; 2638 } 2639 2640 static struct hc_driver dummy_hcd = { 2641 .description = (char *) driver_name, 2642 .product_desc = "Dummy host controller", 2643 .hcd_priv_size = sizeof(struct dummy_hcd), 2644 2645 .reset = dummy_setup, 2646 .start = dummy_start, 2647 .stop = dummy_stop, 2648 2649 .urb_enqueue = dummy_urb_enqueue, 2650 .urb_dequeue = dummy_urb_dequeue, 2651 2652 .get_frame_number = dummy_h_get_frame, 2653 2654 .hub_status_data = dummy_hub_status, 2655 .hub_control = dummy_hub_control, 2656 .bus_suspend = dummy_bus_suspend, 2657 .bus_resume = dummy_bus_resume, 2658 2659 .alloc_streams = dummy_alloc_streams, 2660 .free_streams = dummy_free_streams, 2661 }; 2662 2663 static int dummy_hcd_probe(struct platform_device *pdev) 2664 { 2665 struct dummy *dum; 2666 struct usb_hcd *hs_hcd; 2667 struct usb_hcd *ss_hcd; 2668 int retval; 2669 2670 dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); 2671 dum = *((void **)dev_get_platdata(&pdev->dev)); 2672 2673 if (mod_data.is_super_speed) 2674 dummy_hcd.flags = HCD_USB3 | HCD_SHARED; 2675 else if (mod_data.is_high_speed) 2676 dummy_hcd.flags = HCD_USB2; 2677 else 2678 dummy_hcd.flags = HCD_USB11; 2679 hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev)); 2680 if (!hs_hcd) 2681 return -ENOMEM; 2682 hs_hcd->has_tt = 1; 2683 2684 retval = usb_add_hcd(hs_hcd, 0, 0); 2685 if (retval) 2686 goto put_usb2_hcd; 2687 2688 if (mod_data.is_super_speed) { 2689 ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, 2690 dev_name(&pdev->dev), hs_hcd); 2691 if (!ss_hcd) { 2692 retval = -ENOMEM; 2693 goto dealloc_usb2_hcd; 2694 } 2695 2696 retval = usb_add_hcd(ss_hcd, 0, 0); 2697 if (retval) 2698 goto put_usb3_hcd; 2699 } 2700 return 0; 2701 2702 put_usb3_hcd: 2703 usb_put_hcd(ss_hcd); 2704 dealloc_usb2_hcd: 2705 usb_remove_hcd(hs_hcd); 2706 put_usb2_hcd: 2707 usb_put_hcd(hs_hcd); 2708 dum->hs_hcd = dum->ss_hcd = NULL; 2709 return retval; 2710 } 2711 2712 static void dummy_hcd_remove(struct platform_device *pdev) 2713 { 2714 struct dummy *dum; 2715 2716 dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum; 2717 2718 if (dum->ss_hcd) { 2719 usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); 2720 usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); 2721 } 2722 2723 usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); 2724 usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); 2725 2726 dum->hs_hcd = NULL; 2727 dum->ss_hcd = NULL; 2728 } 2729 2730 static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state) 2731 { 2732 struct usb_hcd *hcd; 2733 struct dummy_hcd *dum_hcd; 2734 int rc = 0; 2735 2736 dev_dbg(&pdev->dev, "%s\n", __func__); 2737 2738 hcd = platform_get_drvdata(pdev); 2739 dum_hcd = hcd_to_dummy_hcd(hcd); 2740 if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { 2741 dev_warn(&pdev->dev, "Root hub isn't suspended!\n"); 2742 rc = -EBUSY; 2743 } else 2744 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 2745 return rc; 2746 } 2747 2748 static int dummy_hcd_resume(struct platform_device *pdev) 2749 { 2750 struct usb_hcd *hcd; 2751 2752 dev_dbg(&pdev->dev, "%s\n", __func__); 2753 2754 hcd = platform_get_drvdata(pdev); 2755 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 2756 usb_hcd_poll_rh_status(hcd); 2757 return 0; 2758 } 2759 2760 static struct platform_driver dummy_hcd_driver = { 2761 .probe = dummy_hcd_probe, 2762 .remove_new = dummy_hcd_remove, 2763 .suspend = dummy_hcd_suspend, 2764 .resume = dummy_hcd_resume, 2765 .driver = { 2766 .name = driver_name, 2767 }, 2768 }; 2769 2770 /*-------------------------------------------------------------------------*/ 2771 #define MAX_NUM_UDC 32 2772 static struct platform_device *the_udc_pdev[MAX_NUM_UDC]; 2773 static struct platform_device *the_hcd_pdev[MAX_NUM_UDC]; 2774 2775 static int __init dummy_hcd_init(void) 2776 { 2777 int retval = -ENOMEM; 2778 int i; 2779 struct dummy *dum[MAX_NUM_UDC] = {}; 2780 2781 if (usb_disabled()) 2782 return -ENODEV; 2783 2784 if (!mod_data.is_high_speed && mod_data.is_super_speed) 2785 return -EINVAL; 2786 2787 if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { 2788 pr_err("Number of emulated UDC must be in range of 1...%d\n", 2789 MAX_NUM_UDC); 2790 return -EINVAL; 2791 } 2792 2793 for (i = 0; i < mod_data.num; i++) { 2794 the_hcd_pdev[i] = platform_device_alloc(driver_name, i); 2795 if (!the_hcd_pdev[i]) { 2796 i--; 2797 while (i >= 0) 2798 platform_device_put(the_hcd_pdev[i--]); 2799 return retval; 2800 } 2801 } 2802 for (i = 0; i < mod_data.num; i++) { 2803 the_udc_pdev[i] = platform_device_alloc(gadget_name, i); 2804 if (!the_udc_pdev[i]) { 2805 i--; 2806 while (i >= 0) 2807 platform_device_put(the_udc_pdev[i--]); 2808 goto err_alloc_udc; 2809 } 2810 } 2811 for (i = 0; i < mod_data.num; i++) { 2812 dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); 2813 if (!dum[i]) { 2814 retval = -ENOMEM; 2815 goto err_add_pdata; 2816 } 2817 retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], 2818 sizeof(void *)); 2819 if (retval) 2820 goto err_add_pdata; 2821 retval = platform_device_add_data(the_udc_pdev[i], &dum[i], 2822 sizeof(void *)); 2823 if (retval) 2824 goto err_add_pdata; 2825 } 2826 2827 retval = platform_driver_register(&dummy_hcd_driver); 2828 if (retval < 0) 2829 goto err_add_pdata; 2830 retval = platform_driver_register(&dummy_udc_driver); 2831 if (retval < 0) 2832 goto err_register_udc_driver; 2833 2834 for (i = 0; i < mod_data.num; i++) { 2835 retval = platform_device_add(the_hcd_pdev[i]); 2836 if (retval < 0) { 2837 i--; 2838 while (i >= 0) 2839 platform_device_del(the_hcd_pdev[i--]); 2840 goto err_add_hcd; 2841 } 2842 } 2843 for (i = 0; i < mod_data.num; i++) { 2844 if (!dum[i]->hs_hcd || 2845 (!dum[i]->ss_hcd && mod_data.is_super_speed)) { 2846 /* 2847 * The hcd was added successfully but its probe 2848 * function failed for some reason. 2849 */ 2850 retval = -EINVAL; 2851 goto err_add_udc; 2852 } 2853 } 2854 2855 for (i = 0; i < mod_data.num; i++) { 2856 retval = platform_device_add(the_udc_pdev[i]); 2857 if (retval < 0) { 2858 i--; 2859 while (i >= 0) 2860 platform_device_del(the_udc_pdev[i--]); 2861 goto err_add_udc; 2862 } 2863 } 2864 2865 for (i = 0; i < mod_data.num; i++) { 2866 if (!platform_get_drvdata(the_udc_pdev[i])) { 2867 /* 2868 * The udc was added successfully but its probe 2869 * function failed for some reason. 2870 */ 2871 retval = -EINVAL; 2872 goto err_probe_udc; 2873 } 2874 } 2875 return retval; 2876 2877 err_probe_udc: 2878 for (i = 0; i < mod_data.num; i++) 2879 platform_device_del(the_udc_pdev[i]); 2880 err_add_udc: 2881 for (i = 0; i < mod_data.num; i++) 2882 platform_device_del(the_hcd_pdev[i]); 2883 err_add_hcd: 2884 platform_driver_unregister(&dummy_udc_driver); 2885 err_register_udc_driver: 2886 platform_driver_unregister(&dummy_hcd_driver); 2887 err_add_pdata: 2888 for (i = 0; i < mod_data.num; i++) 2889 kfree(dum[i]); 2890 for (i = 0; i < mod_data.num; i++) 2891 platform_device_put(the_udc_pdev[i]); 2892 err_alloc_udc: 2893 for (i = 0; i < mod_data.num; i++) 2894 platform_device_put(the_hcd_pdev[i]); 2895 return retval; 2896 } 2897 module_init(dummy_hcd_init); 2898 2899 static void __exit dummy_hcd_cleanup(void) 2900 { 2901 int i; 2902 2903 for (i = 0; i < mod_data.num; i++) { 2904 struct dummy *dum; 2905 2906 dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev)); 2907 2908 platform_device_unregister(the_udc_pdev[i]); 2909 platform_device_unregister(the_hcd_pdev[i]); 2910 kfree(dum); 2911 } 2912 platform_driver_unregister(&dummy_udc_driver); 2913 platform_driver_unregister(&dummy_hcd_driver); 2914 } 2915 module_exit(dummy_hcd_cleanup); 2916