1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * bdc.h - header for the BRCM BDC USB3.0 device controller 4 * 5 * Copyright (C) 2014 Broadcom Corporation 6 * 7 * Author: Ashwini Pahuja 8 */ 9 10 #ifndef __LINUX_BDC_H__ 11 #define __LINUX_BDC_H__ 12 13 #include <linux/kernel.h> 14 #include <linux/usb.h> 15 #include <linux/device.h> 16 #include <linux/spinlock.h> 17 #include <linux/list.h> 18 #include <linux/dma-mapping.h> 19 #include <linux/mm.h> 20 #include <linux/debugfs.h> 21 #include <linux/usb/ch9.h> 22 #include <linux/usb/gadget.h> 23 #include <linux/unaligned.h> 24 25 #define BRCM_BDC_NAME "bdc" 26 #define BRCM_BDC_DESC "Broadcom USB Device Controller driver" 27 28 #define DMA_ADDR_INVALID (~(dma_addr_t)0) 29 30 /* BDC command operation timeout in usec*/ 31 #define BDC_CMD_TIMEOUT 1000 32 /* BDC controller operation timeout in usec*/ 33 #define BDC_COP_TIMEOUT 500 34 35 /* 36 * Maximum size of ep0 response buffer for ch9 requests, 37 * the set_sel request uses 6 so far, the max. 38 */ 39 #define EP0_RESPONSE_BUFF 6 40 /* Start with SS as default */ 41 #define EP0_MAX_PKT_SIZE 512 42 43 /* 64 entries in a SRR */ 44 #define NUM_SR_ENTRIES 64 45 46 /* Num of bds per table */ 47 #define NUM_BDS_PER_TABLE 64 48 49 /* Num of tables in bd list for control,bulk and Int ep */ 50 #define NUM_TABLES 2 51 52 /* Num of tables in bd list for Isoch ep */ 53 #define NUM_TABLES_ISOCH 6 54 55 /* U1 Timeout default: 248usec */ 56 #define U1_TIMEOUT 0xf8 57 58 /* Interrupt coalescence in usec */ 59 #define INT_CLS 500 60 61 /* Register offsets */ 62 /* Configuration and Capability registers */ 63 #define BDC_BDCCFG0 0x00 64 #define BDC_BDCCFG1 0x04 65 #define BDC_BDCCAP0 0x08 66 #define BDC_BDCCAP1 0x0c 67 #define BDC_CMDPAR0 0x10 68 #define BDC_CMDPAR1 0x14 69 #define BDC_CMDPAR2 0x18 70 #define BDC_CMDSC 0x1c 71 #define BDC_USPC 0x20 72 #define BDC_USPPMS 0x28 73 #define BDC_USPPM2 0x2c 74 #define BDC_SPBBAL 0x38 75 #define BDC_SPBBAH 0x3c 76 #define BDC_BDCSC 0x40 77 #define BDC_XSFNTF 0x4c 78 79 #define BDC_DVCSA 0x50 80 #define BDC_DVCSB 0x54 81 #define BDC_EPSTS0 0x60 82 #define BDC_EPSTS1 0x64 83 #define BDC_EPSTS2 0x68 84 #define BDC_EPSTS3 0x6c 85 #define BDC_EPSTS4 0x70 86 #define BDC_EPSTS5 0x74 87 #define BDC_EPSTS6 0x78 88 #define BDC_EPSTS7 0x7c 89 #define BDC_SRRBAL(n) (0x200 + ((n) * 0x10)) 90 #define BDC_SRRBAH(n) (0x204 + ((n) * 0x10)) 91 #define BDC_SRRINT(n) (0x208 + ((n) * 0x10)) 92 #define BDC_INTCTLS(n) (0x20c + ((n) * 0x10)) 93 94 /* Extended capability regs */ 95 #define BDC_FSCNOC 0xcd4 96 #define BDC_FSCNIC 0xce4 97 #define NUM_NCS(p) ((p) >> 28) 98 99 /* Register bit fields and Masks */ 100 /* BDC Configuration 0 */ 101 #define BDC_PGS(p) (((p) & (0x7 << 8)) >> 8) 102 #define BDC_SPB(p) ((p) & 0x7) 103 104 /* BDC Capability1 */ 105 #define BDC_P64 BIT(0) 106 107 /* BDC Command register */ 108 #define BDC_CMD_FH 0xe 109 #define BDC_CMD_DNC 0x6 110 #define BDC_CMD_EPO 0x4 111 #define BDC_CMD_BLA 0x3 112 #define BDC_CMD_EPC 0x2 113 #define BDC_CMD_DVC 0x1 114 #define BDC_CMD_CWS BIT(5) 115 #define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6) 116 #define BDC_CMD_EPN(p) (((p) & 0x1f) << 10) 117 #define BDC_SUB_CMD_ADD (0x1 << 17) 118 #define BDC_SUB_CMD_FWK (0x4 << 17) 119 /* Reset sequence number */ 120 #define BDC_CMD_EPO_RST_SN (0x1 << 16) 121 #define BDC_CMD_EP0_XSD (0x1 << 16) 122 #define BDC_SUB_CMD_ADD_EP (0x1 << 17) 123 #define BDC_SUB_CMD_DRP_EP (0x2 << 17) 124 #define BDC_SUB_CMD_EP_STP (0x2 << 17) 125 #define BDC_SUB_CMD_EP_STL (0x4 << 17) 126 #define BDC_SUB_CMD_EP_RST (0x1 << 17) 127 #define BDC_CMD_SRD BIT(27) 128 129 /* CMD completion status */ 130 #define BDC_CMDS_SUCC 0x1 131 #define BDC_CMDS_PARA 0x3 132 #define BDC_CMDS_STAT 0x4 133 #define BDC_CMDS_FAIL 0x5 134 #define BDC_CMDS_INTL 0x6 135 #define BDC_CMDS_BUSY 0xf 136 137 /* CMDSC Param 2 shifts */ 138 #define EPT_SHIFT 22 139 #define MP_SHIFT 10 140 #define MB_SHIFT 6 141 #define EPM_SHIFT 4 142 143 /* BDC USPSC */ 144 #define BDC_VBC BIT(31) 145 #define BDC_PRC BIT(30) 146 #define BDC_PCE BIT(29) 147 #define BDC_CFC BIT(28) 148 #define BDC_PCC BIT(27) 149 #define BDC_PSC BIT(26) 150 #define BDC_VBS BIT(25) 151 #define BDC_PRS BIT(24) 152 #define BDC_PCS BIT(23) 153 #define BDC_PSP(p) (((p) & (0x7 << 20))>>20) 154 #define BDC_SCN BIT(8) 155 #define BDC_SDC BIT(7) 156 #define BDC_SWS BIT(4) 157 158 #define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf) 159 #define BDC_PSP(p) (((p) & (0x7 << 20))>>20) 160 161 #define BDC_SPEED_FS 0x1 162 #define BDC_SPEED_LS 0x2 163 #define BDC_SPEED_HS 0x3 164 #define BDC_SPEED_SS 0x4 165 166 #define BDC_PST(p) ((p) & 0xf) 167 #define BDC_PST_MASK 0xf 168 169 /* USPPMS */ 170 #define BDC_U2E BIT(31) 171 #define BDC_U1E BIT(30) 172 #define BDC_U2A BIT(29) 173 #define BDC_PORT_W1S BIT(17) 174 #define BDC_U1T(p) ((p) & 0xff) 175 #define BDC_U2T(p) (((p) & 0xff) << 8) 176 #define BDC_U1T_MASK 0xff 177 178 /* USBPM2 */ 179 /* Hardware LPM Enable */ 180 #define BDC_HLE BIT(16) 181 182 /* BDC Status and Control */ 183 #define BDC_COP_RST (1 << 29) 184 #define BDC_COP_RUN (2 << 29) 185 #define BDC_COP_STP (4 << 29) 186 187 #define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP) 188 189 #define BDC_COS BIT(28) 190 #define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20) 191 #define BDC_MASK_MCW BIT(7) 192 #define BDC_GIE BIT(1) 193 #define BDC_GIP BIT(0) 194 195 #define BDC_HLT 1 196 #define BDC_NOR 2 197 #define BDC_OIP 7 198 199 /* Buffer descriptor and Status report bit fields and masks */ 200 #define BD_TYPE_BITMASK (0xf) 201 #define BD_CHAIN 0xf 202 203 #define BD_TFS_SHIFT 4 204 #define BD_SOT BIT(26) 205 #define BD_EOT BIT(27) 206 #define BD_ISP BIT(29) 207 #define BD_IOC BIT(30) 208 #define BD_SBF BIT(31) 209 210 #define BD_INTR_TARGET(p) (((p) & 0x1f) << 27) 211 212 #define BDC_SRR_RWS BIT(4) 213 #define BDC_SRR_RST BIT(3) 214 #define BDC_SRR_ISR BIT(2) 215 #define BDC_SRR_IE BIT(1) 216 #define BDC_SRR_IP BIT(0) 217 #define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24) 218 #define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16) 219 #define BDC_SRR_DPI_MASK 0x00ff0000 220 221 #define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT) 222 223 /* Control transfer BD specific fields */ 224 #define BD_DIR_IN BIT(25) 225 226 #define BDC_PTC_MASK 0xf0000000 227 228 /* status report defines */ 229 #define SR_XSF 0 230 #define SR_USPC 4 231 #define SR_BD_LEN(p) ((p) & 0xffffff) 232 233 #define XSF_SUCC 0x1 234 #define XSF_SHORT 0x3 235 #define XSF_BABB 0x4 236 #define XSF_SETUP_RECV 0x6 237 #define XSF_DATA_START 0x7 238 #define XSF_STATUS_START 0x8 239 240 #define XSF_STS(p) (((p) >> 28) & 0xf) 241 242 /* Transfer BD fields */ 243 #define BD_LEN(p) ((p) & 0x1ffff) 244 #define BD_LTF BIT(25) 245 #define BD_TYPE_DS 0x1 246 #define BD_TYPE_SS 0x2 247 248 #define BDC_EP_ENABLED BIT(0) 249 #define BDC_EP_STALL BIT(1) 250 #define BDC_EP_STOP BIT(2) 251 252 /* One BD can transfer max 65536 bytes */ 253 #define BD_MAX_BUFF_SIZE (1 << 16) 254 /* Maximum bytes in one XFR, Refer to BDC spec */ 255 #define MAX_XFR_LEN 16777215 256 257 /* defines for Force Header command */ 258 #define DEV_NOTF_TYPE 6 259 #define FWK_SUBTYPE 1 260 #define TRA_PACKET 4 261 262 #define to_bdc_ep(e) container_of(e, struct bdc_ep, usb_ep) 263 #define to_bdc_req(r) container_of(r, struct bdc_req, usb_req) 264 #define gadget_to_bdc(g) container_of(g, struct bdc, gadget) 265 266 /* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */ 267 #define BDC_TNOTIFY 2500 /*in ms*/ 268 /* Devstatus bitfields */ 269 #define REMOTE_WAKEUP_ISSUED BIT(16) 270 #define DEVICE_SUSPENDED BIT(17) 271 #define FUNC_WAKE_ISSUED BIT(18) 272 #define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP) 273 274 /* On disconnect, preserve these bits and clear rest */ 275 #define DEVSTATUS_CLEAR (1 << USB_DEVICE_SELF_POWERED) 276 /* Hardware and software Data structures */ 277 278 /* Endpoint bd: buffer descriptor */ 279 struct bdc_bd { 280 __le32 offset[4]; 281 }; 282 283 /* Status report in Status report ring(srr) */ 284 struct bdc_sr { 285 __le32 offset[4]; 286 }; 287 288 /* bd_table: contiguous bd's in a table */ 289 struct bd_table { 290 struct bdc_bd *start_bd; 291 /* dma address of start bd of table*/ 292 dma_addr_t dma; 293 }; 294 295 /* 296 * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd 297 * table's chained to each other through a chain bd, every table has equal 298 * number of bds. the software uses bdi(bd index) to refer to particular bd in 299 * the list. 300 */ 301 struct bd_list { 302 /* Array of bd table pointers*/ 303 struct bd_table **bd_table_array; 304 /* How many tables chained to each other */ 305 int num_tabs; 306 /* Max_bdi = num_tabs * num_bds_table - 1 */ 307 int max_bdi; 308 /* current enq bdi from sw point of view */ 309 int eqp_bdi; 310 /* current deq bdi from sw point of view */ 311 int hwd_bdi; 312 /* numbers of bds per table */ 313 int num_bds_table; 314 }; 315 316 struct bdc_req; 317 318 /* Representation of a transfer, one transfer can have multiple bd's */ 319 struct bd_transfer { 320 struct bdc_req *req; 321 /* start bd index */ 322 int start_bdi; 323 /* this will be the next hw dqp when this transfer completes */ 324 int next_hwd_bdi; 325 /* number of bds in this transfer */ 326 int num_bds; 327 }; 328 329 /* 330 * Representation of a gadget request, every gadget request is contained 331 * by 1 bd_transfer. 332 */ 333 struct bdc_req { 334 struct usb_request usb_req; 335 struct list_head queue; 336 struct bdc_ep *ep; 337 /* only one Transfer per request */ 338 struct bd_transfer bd_xfr; 339 int epnum; 340 }; 341 342 /* scratchpad buffer needed by bdc hardware */ 343 struct bdc_scratchpad { 344 dma_addr_t sp_dma; 345 void *buff; 346 u32 size; 347 }; 348 349 /* endpoint representation */ 350 struct bdc_ep { 351 struct usb_ep usb_ep; 352 struct list_head queue; 353 struct bdc *bdc; 354 u8 ep_type; 355 u8 dir; 356 u8 ep_num; 357 const struct usb_ss_ep_comp_descriptor *comp_desc; 358 const struct usb_endpoint_descriptor *desc; 359 unsigned int flags; 360 char name[20]; 361 /* endpoint bd list*/ 362 struct bd_list bd_list; 363 /* 364 * HW generates extra event for multi bd tranfers, this flag helps in 365 * ignoring the extra event 366 */ 367 bool ignore_next_sr; 368 }; 369 370 /* bdc cmmand parameter structure */ 371 struct bdc_cmd_params { 372 u32 param2; 373 u32 param1; 374 u32 param0; 375 }; 376 377 /* status report ring(srr), currently one srr is supported for entire system */ 378 struct srr { 379 struct bdc_sr *sr_bds; 380 u16 eqp_index; 381 u16 dqp_index; 382 dma_addr_t dma_addr; 383 }; 384 385 /* EP0 states */ 386 enum bdc_ep0_state { 387 WAIT_FOR_SETUP = 0, 388 WAIT_FOR_DATA_START, 389 WAIT_FOR_DATA_XMIT, 390 WAIT_FOR_STATUS_START, 391 WAIT_FOR_STATUS_XMIT, 392 STATUS_PENDING 393 }; 394 395 /* Link states */ 396 enum bdc_link_state { 397 BDC_LINK_STATE_U0 = 0x00, 398 BDC_LINK_STATE_U3 = 0x03, 399 BDC_LINK_STATE_RX_DET = 0x05, 400 BDC_LINK_STATE_RESUME = 0x0f 401 }; 402 403 /* representation of bdc */ 404 struct bdc { 405 struct usb_gadget gadget; 406 struct usb_gadget_driver *gadget_driver; 407 struct device *dev; 408 /* device lock */ 409 spinlock_t lock; 410 411 /* generic phy */ 412 struct phy **phys; 413 int num_phys; 414 /* num of endpoints for a particular instantiation of IP */ 415 unsigned int num_eps; 416 /* 417 * Array of ep's, it uses the same index covention as bdc hw i.e. 418 * 1 for ep0, 2 for 1out,3 for 1in .... 419 */ 420 struct bdc_ep **bdc_ep_array; 421 void __iomem *regs; 422 struct bdc_scratchpad scratchpad; 423 u32 sp_buff_size; 424 /* current driver supports 1 status ring */ 425 struct srr srr; 426 /* Last received setup packet */ 427 struct usb_ctrlrequest setup_pkt; 428 struct bdc_req ep0_req; 429 struct bdc_req status_req; 430 enum bdc_ep0_state ep0_state; 431 bool delayed_status; 432 bool zlp_needed; 433 bool reinit; 434 bool pullup; 435 /* Bits 0-15 are standard and 16-31 for proprietary information */ 436 u32 devstatus; 437 int irq; 438 void *mem; 439 u32 dev_addr; 440 /* DMA pools */ 441 struct dma_pool *bd_table_pool; 442 u8 test_mode; 443 /* array of callbacks for various status report handlers */ 444 void (*sr_handler[2])(struct bdc *, struct bdc_sr *); 445 /* ep0 callback handlers */ 446 void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *); 447 /* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */ 448 unsigned char ep0_response_buff[EP0_RESPONSE_BUFF]; 449 /* 450 * Timer to check if host resumed transfer after bdc sent Func wake 451 * notification packet after a remote wakeup. if not, then resend the 452 * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4 453 */ 454 struct delayed_work func_wake_notify; 455 struct clk *clk; 456 }; 457 458 static inline u32 bdc_readl(void __iomem *base, u32 offset) 459 { 460 return readl(base + offset); 461 } 462 463 static inline void bdc_writel(void __iomem *base, u32 offset, u32 value) 464 { 465 writel(value, base + offset); 466 } 467 468 /* Buffer descriptor list operations */ 469 void bdc_notify_xfr(struct bdc *bdc, u32 epnum); 470 void bdc_softconn(struct bdc *bdc); 471 void bdc_softdisconn(struct bdc *bdc); 472 int bdc_run(struct bdc *bdc); 473 int bdc_stop(struct bdc *bdc); 474 int bdc_reset(struct bdc *bdc); 475 int bdc_udc_init(struct bdc *bdc); 476 void bdc_udc_exit(struct bdc *bdc); 477 int bdc_reinit(struct bdc *bdc); 478 479 /* Status report handlers */ 480 /* Upstream port status change sr */ 481 void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport); 482 /* transfer sr */ 483 void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport); 484 /* EP0 XSF handlers */ 485 void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport); 486 void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport); 487 void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport); 488 489 #endif /* __LINUX_BDC_H__ */ 490