1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget 4 * 5 * epn.c - Generic endpoints management 6 * 7 * Copyright 2017 IBM Corporation 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/platform_device.h> 18 #include <linux/delay.h> 19 #include <linux/ioport.h> 20 #include <linux/slab.h> 21 #include <linux/errno.h> 22 #include <linux/list.h> 23 #include <linux/interrupt.h> 24 #include <linux/proc_fs.h> 25 #include <linux/prefetch.h> 26 #include <linux/clk.h> 27 #include <linux/usb/gadget.h> 28 #include <linux/of.h> 29 #include <linux/of_gpio.h> 30 #include <linux/regmap.h> 31 #include <linux/dma-mapping.h> 32 33 #include "vhub.h" 34 35 #define EXTRA_CHECKS 36 37 #ifdef EXTRA_CHECKS 38 #define CHECK(ep, expr, fmt...) \ 39 do { \ 40 if (!(expr)) EPDBG(ep, "CHECK:" fmt); \ 41 } while(0) 42 #else 43 #define CHECK(ep, expr, fmt...) do { } while(0) 44 #endif 45 46 static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req) 47 { 48 unsigned int act = req->req.actual; 49 unsigned int len = req->req.length; 50 unsigned int chunk; 51 52 /* There should be no DMA ongoing */ 53 WARN_ON(req->active); 54 55 /* Calculate next chunk size */ 56 chunk = len - act; 57 if (chunk > ep->ep.maxpacket) 58 chunk = ep->ep.maxpacket; 59 else if ((chunk < ep->ep.maxpacket) || !req->req.zero) 60 req->last_desc = 1; 61 62 EPVDBG(ep, "kick req %p act=%d/%d chunk=%d last=%d\n", 63 req, act, len, chunk, req->last_desc); 64 65 /* If DMA unavailable, using staging EP buffer */ 66 if (!req->req.dma) { 67 68 /* For IN transfers, copy data over first */ 69 if (ep->epn.is_in) { 70 memcpy(ep->buf, req->req.buf + act, chunk); 71 vhub_dma_workaround(ep->buf); 72 } 73 writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE); 74 } else { 75 if (ep->epn.is_in) 76 vhub_dma_workaround(req->req.buf); 77 writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE); 78 } 79 80 /* Start DMA */ 81 req->active = true; 82 writel(VHUB_EP_DMA_SET_TX_SIZE(chunk), 83 ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 84 writel(VHUB_EP_DMA_SET_TX_SIZE(chunk) | VHUB_EP_DMA_SINGLE_KICK, 85 ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 86 } 87 88 static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep) 89 { 90 struct ast_vhub_req *req; 91 unsigned int len; 92 u32 stat; 93 94 /* Read EP status */ 95 stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 96 97 /* Grab current request if any */ 98 req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); 99 100 EPVDBG(ep, "ACK status=%08x is_in=%d, req=%p (active=%d)\n", 101 stat, ep->epn.is_in, req, req ? req->active : 0); 102 103 /* In absence of a request, bail out, must have been dequeued */ 104 if (!req) 105 return; 106 107 /* 108 * Request not active, move on to processing queue, active request 109 * was probably dequeued 110 */ 111 if (!req->active) 112 goto next_chunk; 113 114 /* Check if HW has moved on */ 115 if (VHUB_EP_DMA_RPTR(stat) != 0) { 116 EPDBG(ep, "DMA read pointer not 0 !\n"); 117 return; 118 } 119 120 /* No current DMA ongoing */ 121 req->active = false; 122 123 /* Grab lenght out of HW */ 124 len = VHUB_EP_DMA_TX_SIZE(stat); 125 126 /* If not using DMA, copy data out if needed */ 127 if (!req->req.dma && !ep->epn.is_in && len) 128 memcpy(req->req.buf + req->req.actual, ep->buf, len); 129 130 /* Adjust size */ 131 req->req.actual += len; 132 133 /* Check for short packet */ 134 if (len < ep->ep.maxpacket) 135 req->last_desc = 1; 136 137 /* That's it ? complete the request and pick a new one */ 138 if (req->last_desc >= 0) { 139 ast_vhub_done(ep, req, 0); 140 req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, 141 queue); 142 143 /* 144 * Due to lock dropping inside "done" the next request could 145 * already be active, so check for that and bail if needed. 146 */ 147 if (!req || req->active) 148 return; 149 } 150 151 next_chunk: 152 ast_vhub_epn_kick(ep, req); 153 } 154 155 static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep) 156 { 157 /* 158 * d_next == d_last means descriptor list empty to HW, 159 * thus we can only have AST_VHUB_DESCS_COUNT-1 descriptors 160 * in the list 161 */ 162 return (ep->epn.d_last + AST_VHUB_DESCS_COUNT - ep->epn.d_next - 1) & 163 (AST_VHUB_DESCS_COUNT - 1); 164 } 165 166 static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, 167 struct ast_vhub_req *req) 168 { 169 struct ast_vhub_desc *desc = NULL; 170 unsigned int act = req->act_count; 171 unsigned int len = req->req.length; 172 unsigned int chunk; 173 174 /* Mark request active if not already */ 175 req->active = true; 176 177 /* If the request was already completely written, do nothing */ 178 if (req->last_desc >= 0) 179 return; 180 181 EPVDBG(ep, "kick act=%d/%d chunk_max=%d free_descs=%d\n", 182 act, len, ep->epn.chunk_max, ast_vhub_count_free_descs(ep)); 183 184 /* While we can create descriptors */ 185 while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) { 186 unsigned int d_num; 187 188 /* Grab next free descriptor */ 189 d_num = ep->epn.d_next; 190 desc = &ep->epn.descs[d_num]; 191 ep->epn.d_next = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); 192 193 /* Calculate next chunk size */ 194 chunk = len - act; 195 if (chunk <= ep->epn.chunk_max) { 196 /* 197 * Is this the last packet ? Because of having up to 8 198 * packets in a descriptor we can't just compare "chunk" 199 * with ep.maxpacket. We have to see if it's a multiple 200 * of it to know if we have to send a zero packet. 201 * Sadly that involves a modulo which is a bit expensive 202 * but probably still better than not doing it. 203 */ 204 if (!chunk || !req->req.zero || (chunk % ep->ep.maxpacket) != 0) 205 req->last_desc = d_num; 206 } else { 207 chunk = ep->epn.chunk_max; 208 } 209 210 EPVDBG(ep, " chunk: act=%d/%d chunk=%d last=%d desc=%d free=%d\n", 211 act, len, chunk, req->last_desc, d_num, 212 ast_vhub_count_free_descs(ep)); 213 214 /* Populate descriptor */ 215 desc->w0 = cpu_to_le32(req->req.dma + act); 216 217 /* Interrupt if end of request or no more descriptors */ 218 219 /* 220 * TODO: Be smarter about it, if we don't have enough 221 * descriptors request an interrupt before queue empty 222 * or so in order to be able to populate more before 223 * the HW runs out. This isn't a problem at the moment 224 * as we use 256 descriptors and only put at most one 225 * request in the ring. 226 */ 227 desc->w1 = cpu_to_le32(VHUB_DSC1_IN_SET_LEN(chunk)); 228 if (req->last_desc >= 0 || !ast_vhub_count_free_descs(ep)) 229 desc->w1 |= cpu_to_le32(VHUB_DSC1_IN_INTERRUPT); 230 231 /* Account packet */ 232 req->act_count = act = act + chunk; 233 } 234 235 if (likely(desc)) 236 vhub_dma_workaround(desc); 237 238 /* Tell HW about new descriptors */ 239 writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next), 240 ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 241 242 EPVDBG(ep, "HW kicked, d_next=%d dstat=%08x\n", 243 ep->epn.d_next, readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS)); 244 } 245 246 static void ast_vhub_epn_handle_ack_desc(struct ast_vhub_ep *ep) 247 { 248 struct ast_vhub_req *req; 249 unsigned int len, d_last; 250 u32 stat, stat1; 251 252 /* Read EP status, workaround HW race */ 253 do { 254 stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 255 stat1 = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 256 } while(stat != stat1); 257 258 /* Extract RPTR */ 259 d_last = VHUB_EP_DMA_RPTR(stat); 260 261 /* Grab current request if any */ 262 req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); 263 264 EPVDBG(ep, "ACK status=%08x is_in=%d ep->d_last=%d..%d\n", 265 stat, ep->epn.is_in, ep->epn.d_last, d_last); 266 267 /* Check all completed descriptors */ 268 while (ep->epn.d_last != d_last) { 269 struct ast_vhub_desc *desc; 270 unsigned int d_num; 271 bool is_last_desc; 272 273 /* Grab next completed descriptor */ 274 d_num = ep->epn.d_last; 275 desc = &ep->epn.descs[d_num]; 276 ep->epn.d_last = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); 277 278 /* Grab len out of descriptor */ 279 len = VHUB_DSC1_IN_LEN(le32_to_cpu(desc->w1)); 280 281 EPVDBG(ep, " desc %d len=%d req=%p (act=%d)\n", 282 d_num, len, req, req ? req->active : 0); 283 284 /* If no active request pending, move on */ 285 if (!req || !req->active) 286 continue; 287 288 /* Adjust size */ 289 req->req.actual += len; 290 291 /* Is that the last chunk ? */ 292 is_last_desc = req->last_desc == d_num; 293 CHECK(ep, is_last_desc == (len < ep->ep.maxpacket || 294 (req->req.actual >= req->req.length && 295 !req->req.zero)), 296 "Last packet discrepancy: last_desc=%d len=%d r.act=%d " 297 "r.len=%d r.zero=%d mp=%d\n", 298 is_last_desc, len, req->req.actual, req->req.length, 299 req->req.zero, ep->ep.maxpacket); 300 301 if (is_last_desc) { 302 /* 303 * Because we can only have one request at a time 304 * in our descriptor list in this implementation, 305 * d_last and ep->d_last should now be equal 306 */ 307 CHECK(ep, d_last == ep->epn.d_last, 308 "DMA read ptr mismatch %d vs %d\n", 309 d_last, ep->epn.d_last); 310 311 /* Note: done will drop and re-acquire the lock */ 312 ast_vhub_done(ep, req, 0); 313 req = list_first_entry_or_null(&ep->queue, 314 struct ast_vhub_req, 315 queue); 316 break; 317 } 318 } 319 320 /* More work ? */ 321 if (req) 322 ast_vhub_epn_kick_desc(ep, req); 323 } 324 325 void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep) 326 { 327 if (ep->epn.desc_mode) 328 ast_vhub_epn_handle_ack_desc(ep); 329 else 330 ast_vhub_epn_handle_ack(ep); 331 } 332 333 static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req, 334 gfp_t gfp_flags) 335 { 336 struct ast_vhub_req *req = to_ast_req(u_req); 337 struct ast_vhub_ep *ep = to_ast_ep(u_ep); 338 struct ast_vhub *vhub = ep->vhub; 339 unsigned long flags; 340 bool empty; 341 int rc; 342 343 /* Paranoid checks */ 344 if (!u_req || !u_req->complete || !u_req->buf) { 345 dev_warn(&vhub->pdev->dev, "Bogus EPn request ! u_req=%p\n", u_req); 346 if (u_req) { 347 dev_warn(&vhub->pdev->dev, "complete=%p internal=%d\n", 348 u_req->complete, req->internal); 349 } 350 return -EINVAL; 351 } 352 353 /* Endpoint enabled ? */ 354 if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx || 355 !ep->dev->enabled || ep->dev->suspended) { 356 EPDBG(ep, "Enqueuing request on wrong or disabled EP\n"); 357 return -ESHUTDOWN; 358 } 359 360 /* Map request for DMA if possible. For now, the rule for DMA is 361 * that: 362 * 363 * * For single stage mode (no descriptors): 364 * 365 * - The buffer is aligned to a 8 bytes boundary (HW requirement) 366 * - For a OUT endpoint, the request size is a multiple of the EP 367 * packet size (otherwise the controller will DMA past the end 368 * of the buffer if the host is sending a too long packet). 369 * 370 * * For descriptor mode (tx only for now), always. 371 * 372 * We could relax the latter by making the decision to use the bounce 373 * buffer based on the size of a given *segment* of the request rather 374 * than the whole request. 375 */ 376 if (ep->epn.desc_mode || 377 ((((unsigned long)u_req->buf & 7) == 0) && 378 (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) { 379 rc = usb_gadget_map_request(&ep->dev->gadget, u_req, 380 ep->epn.is_in); 381 if (rc) { 382 dev_warn(&vhub->pdev->dev, 383 "Request mapping failure %d\n", rc); 384 return rc; 385 } 386 } else 387 u_req->dma = 0; 388 389 EPVDBG(ep, "enqueue req @%p\n", req); 390 EPVDBG(ep, " l=%d dma=0x%x zero=%d noshort=%d noirq=%d is_in=%d\n", 391 u_req->length, (u32)u_req->dma, u_req->zero, 392 u_req->short_not_ok, u_req->no_interrupt, 393 ep->epn.is_in); 394 395 /* Initialize request progress fields */ 396 u_req->status = -EINPROGRESS; 397 u_req->actual = 0; 398 req->act_count = 0; 399 req->active = false; 400 req->last_desc = -1; 401 spin_lock_irqsave(&vhub->lock, flags); 402 empty = list_empty(&ep->queue); 403 404 /* Add request to list and kick processing if empty */ 405 list_add_tail(&req->queue, &ep->queue); 406 if (empty) { 407 if (ep->epn.desc_mode) 408 ast_vhub_epn_kick_desc(ep, req); 409 else 410 ast_vhub_epn_kick(ep, req); 411 } 412 spin_unlock_irqrestore(&vhub->lock, flags); 413 414 return 0; 415 } 416 417 static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, 418 bool restart_ep) 419 { 420 u32 state, reg, loops; 421 422 /* Stop DMA activity */ 423 writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 424 425 /* Wait for it to complete */ 426 for (loops = 0; loops < 1000; loops++) { 427 state = readl(ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 428 state = VHUB_EP_DMA_PROC_STATUS(state); 429 if (state == EP_DMA_PROC_RX_IDLE || 430 state == EP_DMA_PROC_TX_IDLE) 431 break; 432 udelay(1); 433 } 434 if (loops >= 1000) 435 dev_warn(&ep->vhub->pdev->dev, "Timeout waiting for DMA\n"); 436 437 /* If we don't have to restart the endpoint, that's it */ 438 if (!restart_ep) 439 return; 440 441 /* Restart the endpoint */ 442 if (ep->epn.desc_mode) { 443 /* 444 * Take out descriptors by resetting the DMA read 445 * pointer to be equal to the CPU write pointer. 446 * 447 * Note: If we ever support creating descriptors for 448 * requests that aren't the head of the queue, we 449 * may have to do something more complex here, 450 * especially if the request being taken out is 451 * not the current head descriptors. 452 */ 453 reg = VHUB_EP_DMA_SET_RPTR(ep->epn.d_next) | 454 VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next); 455 writel(reg, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 456 457 /* Then turn it back on */ 458 writel(ep->epn.dma_conf, 459 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 460 } else { 461 /* Single mode: just turn it back on */ 462 writel(ep->epn.dma_conf, 463 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 464 } 465 } 466 467 static int ast_vhub_epn_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) 468 { 469 struct ast_vhub_ep *ep = to_ast_ep(u_ep); 470 struct ast_vhub *vhub = ep->vhub; 471 struct ast_vhub_req *req; 472 unsigned long flags; 473 int rc = -EINVAL; 474 475 spin_lock_irqsave(&vhub->lock, flags); 476 477 /* Make sure it's actually queued on this endpoint */ 478 list_for_each_entry (req, &ep->queue, queue) { 479 if (&req->req == u_req) 480 break; 481 } 482 483 if (&req->req == u_req) { 484 EPVDBG(ep, "dequeue req @%p active=%d\n", 485 req, req->active); 486 if (req->active) 487 ast_vhub_stop_active_req(ep, true); 488 ast_vhub_done(ep, req, -ECONNRESET); 489 rc = 0; 490 } 491 492 spin_unlock_irqrestore(&vhub->lock, flags); 493 return rc; 494 } 495 496 void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep) 497 { 498 u32 reg; 499 500 if (WARN_ON(ep->d_idx == 0)) 501 return; 502 reg = readl(ep->epn.regs + AST_VHUB_EP_CONFIG); 503 if (ep->epn.stalled || ep->epn.wedged) 504 reg |= VHUB_EP_CFG_STALL_CTRL; 505 else 506 reg &= ~VHUB_EP_CFG_STALL_CTRL; 507 writel(reg, ep->epn.regs + AST_VHUB_EP_CONFIG); 508 509 if (!ep->epn.stalled && !ep->epn.wedged) 510 writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), 511 ep->vhub->regs + AST_VHUB_EP_TOGGLE); 512 } 513 514 static int ast_vhub_set_halt_and_wedge(struct usb_ep* u_ep, bool halt, 515 bool wedge) 516 { 517 struct ast_vhub_ep *ep = to_ast_ep(u_ep); 518 struct ast_vhub *vhub = ep->vhub; 519 unsigned long flags; 520 521 EPDBG(ep, "Set halt (%d) & wedge (%d)\n", halt, wedge); 522 523 if (!u_ep || !u_ep->desc) 524 return -EINVAL; 525 if (ep->d_idx == 0) 526 return 0; 527 if (ep->epn.is_iso) 528 return -EOPNOTSUPP; 529 530 spin_lock_irqsave(&vhub->lock, flags); 531 532 /* Fail with still-busy IN endpoints */ 533 if (halt && ep->epn.is_in && !list_empty(&ep->queue)) { 534 spin_unlock_irqrestore(&vhub->lock, flags); 535 return -EAGAIN; 536 } 537 ep->epn.stalled = halt; 538 ep->epn.wedged = wedge; 539 ast_vhub_update_epn_stall(ep); 540 541 spin_unlock_irqrestore(&vhub->lock, flags); 542 543 return 0; 544 } 545 546 static int ast_vhub_epn_set_halt(struct usb_ep *u_ep, int value) 547 { 548 return ast_vhub_set_halt_and_wedge(u_ep, value != 0, false); 549 } 550 551 static int ast_vhub_epn_set_wedge(struct usb_ep *u_ep) 552 { 553 return ast_vhub_set_halt_and_wedge(u_ep, true, true); 554 } 555 556 static int ast_vhub_epn_disable(struct usb_ep* u_ep) 557 { 558 struct ast_vhub_ep *ep = to_ast_ep(u_ep); 559 struct ast_vhub *vhub = ep->vhub; 560 unsigned long flags; 561 u32 imask, ep_ier; 562 563 EPDBG(ep, "Disabling !\n"); 564 565 spin_lock_irqsave(&vhub->lock, flags); 566 567 ep->epn.enabled = false; 568 569 /* Stop active DMA if any */ 570 ast_vhub_stop_active_req(ep, false); 571 572 /* Disable endpoint */ 573 writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); 574 575 /* Disable ACK interrupt */ 576 imask = VHUB_EP_IRQ(ep->epn.g_idx); 577 ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); 578 ep_ier &= ~imask; 579 writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); 580 writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); 581 582 /* Nuke all pending requests */ 583 ast_vhub_nuke(ep, -ESHUTDOWN); 584 585 /* No more descriptor associated with request */ 586 ep->ep.desc = NULL; 587 588 spin_unlock_irqrestore(&vhub->lock, flags); 589 590 return 0; 591 } 592 593 static int ast_vhub_epn_enable(struct usb_ep* u_ep, 594 const struct usb_endpoint_descriptor *desc) 595 { 596 static const char *ep_type_string[] __maybe_unused = { "ctrl", 597 "isoc", 598 "bulk", 599 "intr" }; 600 struct ast_vhub_ep *ep = to_ast_ep(u_ep); 601 struct ast_vhub_dev *dev; 602 struct ast_vhub *vhub; 603 u16 maxpacket, type; 604 unsigned long flags; 605 u32 ep_conf, ep_ier, imask; 606 607 /* Check arguments */ 608 if (!u_ep || !desc) 609 return -EINVAL; 610 611 maxpacket = usb_endpoint_maxp(desc); 612 if (!ep->d_idx || !ep->dev || 613 desc->bDescriptorType != USB_DT_ENDPOINT || 614 maxpacket == 0 || maxpacket > ep->ep.maxpacket) { 615 EPDBG(ep, "Invalid EP enable,d_idx=%d,dev=%p,type=%d,mp=%d/%d\n", 616 ep->d_idx, ep->dev, desc->bDescriptorType, 617 maxpacket, ep->ep.maxpacket); 618 return -EINVAL; 619 } 620 if (ep->d_idx != usb_endpoint_num(desc)) { 621 EPDBG(ep, "EP number mismatch !\n"); 622 return -EINVAL; 623 } 624 625 if (ep->epn.enabled) { 626 EPDBG(ep, "Already enabled\n"); 627 return -EBUSY; 628 } 629 dev = ep->dev; 630 vhub = ep->vhub; 631 632 /* Check device state */ 633 if (!dev->driver) { 634 EPDBG(ep, "Bogus device state: driver=%p speed=%d\n", 635 dev->driver, dev->gadget.speed); 636 return -ESHUTDOWN; 637 } 638 639 /* Grab some info from the descriptor */ 640 ep->epn.is_in = usb_endpoint_dir_in(desc); 641 ep->ep.maxpacket = maxpacket; 642 type = usb_endpoint_type(desc); 643 ep->epn.d_next = ep->epn.d_last = 0; 644 ep->epn.is_iso = false; 645 ep->epn.stalled = false; 646 ep->epn.wedged = false; 647 648 EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n", 649 ep->epn.is_in ? "in" : "out", ep_type_string[type], 650 usb_endpoint_num(desc), maxpacket); 651 652 /* Can we use DMA descriptor mode ? */ 653 ep->epn.desc_mode = ep->epn.descs && ep->epn.is_in; 654 if (ep->epn.desc_mode) 655 memset(ep->epn.descs, 0, 8 * AST_VHUB_DESCS_COUNT); 656 657 /* 658 * Large send function can send up to 8 packets from 659 * one descriptor with a limit of 4095 bytes. 660 */ 661 ep->epn.chunk_max = ep->ep.maxpacket; 662 if (ep->epn.is_in) { 663 ep->epn.chunk_max <<= 3; 664 while (ep->epn.chunk_max > 4095) 665 ep->epn.chunk_max -= ep->ep.maxpacket; 666 } 667 668 switch(type) { 669 case USB_ENDPOINT_XFER_CONTROL: 670 EPDBG(ep, "Only one control endpoint\n"); 671 return -EINVAL; 672 case USB_ENDPOINT_XFER_INT: 673 ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_INT); 674 break; 675 case USB_ENDPOINT_XFER_BULK: 676 ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_BULK); 677 break; 678 case USB_ENDPOINT_XFER_ISOC: 679 ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_ISO); 680 ep->epn.is_iso = true; 681 break; 682 default: 683 return -EINVAL; 684 } 685 686 /* Encode the rest of the EP config register */ 687 if (maxpacket < 1024) 688 ep_conf |= VHUB_EP_CFG_SET_MAX_PKT(maxpacket); 689 if (!ep->epn.is_in) 690 ep_conf |= VHUB_EP_CFG_DIR_OUT; 691 ep_conf |= VHUB_EP_CFG_SET_EP_NUM(usb_endpoint_num(desc)); 692 ep_conf |= VHUB_EP_CFG_ENABLE; 693 ep_conf |= VHUB_EP_CFG_SET_DEV(dev->index + 1); 694 EPVDBG(ep, "config=%08x\n", ep_conf); 695 696 spin_lock_irqsave(&vhub->lock, flags); 697 698 /* Disable HW and reset DMA */ 699 writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); 700 writel(VHUB_EP_DMA_CTRL_RESET, 701 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 702 703 /* Configure and enable */ 704 writel(ep_conf, ep->epn.regs + AST_VHUB_EP_CONFIG); 705 706 if (ep->epn.desc_mode) { 707 /* Clear DMA status, including the DMA read ptr */ 708 writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 709 710 /* Set descriptor base */ 711 writel(ep->epn.descs_dma, 712 ep->epn.regs + AST_VHUB_EP_DESC_BASE); 713 714 /* Set base DMA config value */ 715 ep->epn.dma_conf = VHUB_EP_DMA_DESC_MODE; 716 if (ep->epn.is_in) 717 ep->epn.dma_conf |= VHUB_EP_DMA_IN_LONG_MODE; 718 719 /* First reset and disable all operations */ 720 writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, 721 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 722 723 /* Enable descriptor mode */ 724 writel(ep->epn.dma_conf, 725 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 726 } else { 727 /* Set base DMA config value */ 728 ep->epn.dma_conf = VHUB_EP_DMA_SINGLE_STAGE; 729 730 /* Reset and switch to single stage mode */ 731 writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, 732 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 733 writel(ep->epn.dma_conf, 734 ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); 735 writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); 736 } 737 738 /* Cleanup data toggle just in case */ 739 writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), 740 vhub->regs + AST_VHUB_EP_TOGGLE); 741 742 /* Cleanup and enable ACK interrupt */ 743 imask = VHUB_EP_IRQ(ep->epn.g_idx); 744 writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); 745 ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); 746 ep_ier |= imask; 747 writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); 748 749 /* Woot, we are online ! */ 750 ep->epn.enabled = true; 751 752 spin_unlock_irqrestore(&vhub->lock, flags); 753 754 return 0; 755 } 756 757 static void ast_vhub_epn_dispose(struct usb_ep *u_ep) 758 { 759 struct ast_vhub_ep *ep = to_ast_ep(u_ep); 760 761 if (WARN_ON(!ep->dev || !ep->d_idx)) 762 return; 763 764 EPDBG(ep, "Releasing endpoint\n"); 765 766 /* Take it out of the EP list */ 767 list_del_init(&ep->ep.ep_list); 768 769 /* Mark the address free in the device */ 770 ep->dev->epns[ep->d_idx - 1] = NULL; 771 772 /* Free name & DMA buffers */ 773 kfree(ep->ep.name); 774 ep->ep.name = NULL; 775 dma_free_coherent(&ep->vhub->pdev->dev, 776 AST_VHUB_EPn_MAX_PACKET + 777 8 * AST_VHUB_DESCS_COUNT, 778 ep->buf, ep->buf_dma); 779 ep->buf = NULL; 780 ep->epn.descs = NULL; 781 782 /* Mark free */ 783 ep->dev = NULL; 784 } 785 786 static const struct usb_ep_ops ast_vhub_epn_ops = { 787 .enable = ast_vhub_epn_enable, 788 .disable = ast_vhub_epn_disable, 789 .dispose = ast_vhub_epn_dispose, 790 .queue = ast_vhub_epn_queue, 791 .dequeue = ast_vhub_epn_dequeue, 792 .set_halt = ast_vhub_epn_set_halt, 793 .set_wedge = ast_vhub_epn_set_wedge, 794 .alloc_request = ast_vhub_alloc_request, 795 .free_request = ast_vhub_free_request, 796 }; 797 798 struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr) 799 { 800 struct ast_vhub *vhub = d->vhub; 801 struct ast_vhub_ep *ep; 802 unsigned long flags; 803 int i; 804 805 /* Find a free one (no device) */ 806 spin_lock_irqsave(&vhub->lock, flags); 807 for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) 808 if (vhub->epns[i].dev == NULL) 809 break; 810 if (i >= AST_VHUB_NUM_GEN_EPs) { 811 spin_unlock_irqrestore(&vhub->lock, flags); 812 return NULL; 813 } 814 815 /* Set it up */ 816 ep = &vhub->epns[i]; 817 ep->dev = d; 818 spin_unlock_irqrestore(&vhub->lock, flags); 819 820 DDBG(d, "Allocating gen EP %d for addr %d\n", i, addr); 821 INIT_LIST_HEAD(&ep->queue); 822 ep->d_idx = addr; 823 ep->vhub = vhub; 824 ep->ep.ops = &ast_vhub_epn_ops; 825 ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", addr); 826 d->epns[addr-1] = ep; 827 ep->epn.g_idx = i; 828 ep->epn.regs = vhub->regs + 0x200 + (i * 0x10); 829 830 ep->buf = dma_alloc_coherent(&vhub->pdev->dev, 831 AST_VHUB_EPn_MAX_PACKET + 832 8 * AST_VHUB_DESCS_COUNT, 833 &ep->buf_dma, GFP_KERNEL); 834 if (!ep->buf) { 835 kfree(ep->ep.name); 836 ep->ep.name = NULL; 837 return NULL; 838 } 839 ep->epn.descs = ep->buf + AST_VHUB_EPn_MAX_PACKET; 840 ep->epn.descs_dma = ep->buf_dma + AST_VHUB_EPn_MAX_PACKET; 841 842 usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EPn_MAX_PACKET); 843 list_add_tail(&ep->ep.ep_list, &d->gadget.ep_list); 844 ep->ep.caps.type_iso = true; 845 ep->ep.caps.type_bulk = true; 846 ep->ep.caps.type_int = true; 847 ep->ep.caps.dir_in = true; 848 ep->ep.caps.dir_out = true; 849 850 return ep; 851 } 852