xref: /linux/drivers/usb/gadget/function/f_mass_storage.c (revision e0bf6c5ca2d3281f231c5f0c9bf145e9513644de)
1 /*
2  * f_mass_storage.c -- Mass Storage USB Composite Function
3  *
4  * Copyright (C) 2003-2008 Alan Stern
5  * Copyright (C) 2009 Samsung Electronics
6  *                    Author: Michal Nazarewicz <mina86@mina86.com>
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions, and the following disclaimer,
14  *    without modification.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. The names of the above-listed copyright holders may not be used
19  *    to endorse or promote products derived from this software without
20  *    specific prior written permission.
21  *
22  * ALTERNATIVELY, this software may be distributed under the terms of the
23  * GNU General Public License ("GPL") as published by the Free Software
24  * Foundation, either version 2 of that License or (at your option) any
25  * later version.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
28  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
29  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
31  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
32  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
33  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
34  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
35  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
36  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38  */
39 
40 /*
41  * The Mass Storage Function acts as a USB Mass Storage device,
42  * appearing to the host as a disk drive or as a CD-ROM drive.  In
43  * addition to providing an example of a genuinely useful composite
44  * function for a USB device, it also illustrates a technique of
45  * double-buffering for increased throughput.
46  *
47  * For more information about MSF and in particular its module
48  * parameters and sysfs interface read the
49  * <Documentation/usb/mass-storage.txt> file.
50  */
51 
52 /*
53  * MSF is configured by specifying a fsg_config structure.  It has the
54  * following fields:
55  *
56  *	nluns		Number of LUNs function have (anywhere from 1
57  *				to FSG_MAX_LUNS which is 8).
58  *	luns		An array of LUN configuration values.  This
59  *				should be filled for each LUN that
60  *				function will include (ie. for "nluns"
61  *				LUNs).  Each element of the array has
62  *				the following fields:
63  *	->filename	The path to the backing file for the LUN.
64  *				Required if LUN is not marked as
65  *				removable.
66  *	->ro		Flag specifying access to the LUN shall be
67  *				read-only.  This is implied if CD-ROM
68  *				emulation is enabled as well as when
69  *				it was impossible to open "filename"
70  *				in R/W mode.
71  *	->removable	Flag specifying that LUN shall be indicated as
72  *				being removable.
73  *	->cdrom		Flag specifying that LUN shall be reported as
74  *				being a CD-ROM.
75  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
76  *				commands for this LUN shall be ignored.
77  *
78  *	vendor_name
79  *	product_name
80  *	release		Information used as a reply to INQUIRY
81  *				request.  To use default set to NULL,
82  *				NULL, 0xffff respectively.  The first
83  *				field should be 8 and the second 16
84  *				characters or less.
85  *
86  *	can_stall	Set to permit function to halt bulk endpoints.
87  *				Disabled on some USB devices known not
88  *				to work correctly.  You should set it
89  *				to true.
90  *
91  * If "removable" is not set for a LUN then a backing file must be
92  * specified.  If it is set, then NULL filename means the LUN's medium
93  * is not loaded (an empty string as "filename" in the fsg_config
94  * structure causes error).  The CD-ROM emulation includes a single
95  * data track and no audio tracks; hence there need be only one
96  * backing file per LUN.
97  *
98  * This function is heavily based on "File-backed Storage Gadget" by
99  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
100  * Brownell.  The driver's SCSI command interface was based on the
101  * "Information technology - Small Computer System Interface - 2"
102  * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
103  * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
104  * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
105  * was based on the "Universal Serial Bus Mass Storage Class UFI
106  * Command Specification" document, Revision 1.0, December 14, 1998,
107  * available at
108  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
109  */
110 
111 /*
112  *				Driver Design
113  *
114  * The MSF is fairly straightforward.  There is a main kernel
115  * thread that handles most of the work.  Interrupt routines field
116  * callbacks from the controller driver: bulk- and interrupt-request
117  * completion notifications, endpoint-0 events, and disconnect events.
118  * Completion events are passed to the main thread by wakeup calls.  Many
119  * ep0 requests are handled at interrupt time, but SetInterface,
120  * SetConfiguration, and device reset requests are forwarded to the
121  * thread in the form of "exceptions" using SIGUSR1 signals (since they
122  * should interrupt any ongoing file I/O operations).
123  *
124  * The thread's main routine implements the standard command/data/status
125  * parts of a SCSI interaction.  It and its subroutines are full of tests
126  * for pending signals/exceptions -- all this polling is necessary since
127  * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
128  * indication that the driver really wants to be running in userspace.)
129  * An important point is that so long as the thread is alive it keeps an
130  * open reference to the backing file.  This will prevent unmounting
131  * the backing file's underlying filesystem and could cause problems
132  * during system shutdown, for example.  To prevent such problems, the
133  * thread catches INT, TERM, and KILL signals and converts them into
134  * an EXIT exception.
135  *
136  * In normal operation the main thread is started during the gadget's
137  * fsg_bind() callback and stopped during fsg_unbind().  But it can
138  * also exit when it receives a signal, and there's no point leaving
139  * the gadget running when the thread is dead.  As of this moment, MSF
140  * provides no way to deregister the gadget when thread dies -- maybe
141  * a callback functions is needed.
142  *
143  * To provide maximum throughput, the driver uses a circular pipeline of
144  * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
145  * arbitrarily long; in practice the benefits don't justify having more
146  * than 2 stages (i.e., double buffering).  But it helps to think of the
147  * pipeline as being a long one.  Each buffer head contains a bulk-in and
148  * a bulk-out request pointer (since the buffer can be used for both
149  * output and input -- directions always are given from the host's
150  * point of view) as well as a pointer to the buffer and various state
151  * variables.
152  *
153  * Use of the pipeline follows a simple protocol.  There is a variable
154  * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
155  * At any time that buffer head may still be in use from an earlier
156  * request, so each buffer head has a state variable indicating whether
157  * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
158  * buffer head to be EMPTY, filling the buffer either by file I/O or by
159  * USB I/O (during which the buffer head is BUSY), and marking the buffer
160  * head FULL when the I/O is complete.  Then the buffer will be emptied
161  * (again possibly by USB I/O, during which it is marked BUSY) and
162  * finally marked EMPTY again (possibly by a completion routine).
163  *
164  * A module parameter tells the driver to avoid stalling the bulk
165  * endpoints wherever the transport specification allows.  This is
166  * necessary for some UDCs like the SuperH, which cannot reliably clear a
167  * halt on a bulk endpoint.  However, under certain circumstances the
168  * Bulk-only specification requires a stall.  In such cases the driver
169  * will halt the endpoint and set a flag indicating that it should clear
170  * the halt in software during the next device reset.  Hopefully this
171  * will permit everything to work correctly.  Furthermore, although the
172  * specification allows the bulk-out endpoint to halt when the host sends
173  * too much data, implementing this would cause an unavoidable race.
174  * The driver will always use the "no-stall" approach for OUT transfers.
175  *
176  * One subtle point concerns sending status-stage responses for ep0
177  * requests.  Some of these requests, such as device reset, can involve
178  * interrupting an ongoing file I/O operation, which might take an
179  * arbitrarily long time.  During that delay the host might give up on
180  * the original ep0 request and issue a new one.  When that happens the
181  * driver should not notify the host about completion of the original
182  * request, as the host will no longer be waiting for it.  So the driver
183  * assigns to each ep0 request a unique tag, and it keeps track of the
184  * tag value of the request associated with a long-running exception
185  * (device-reset, interface-change, or configuration-change).  When the
186  * exception handler is finished, the status-stage response is submitted
187  * only if the current ep0 request tag is equal to the exception request
188  * tag.  Thus only the most recently received ep0 request will get a
189  * status-stage response.
190  *
191  * Warning: This driver source file is too long.  It ought to be split up
192  * into a header file plus about 3 separate .c files, to handle the details
193  * of the Gadget, USB Mass Storage, and SCSI protocols.
194  */
195 
196 
197 /* #define VERBOSE_DEBUG */
198 /* #define DUMP_MSGS */
199 
200 #include <linux/blkdev.h>
201 #include <linux/completion.h>
202 #include <linux/dcache.h>
203 #include <linux/delay.h>
204 #include <linux/device.h>
205 #include <linux/fcntl.h>
206 #include <linux/file.h>
207 #include <linux/fs.h>
208 #include <linux/kref.h>
209 #include <linux/kthread.h>
210 #include <linux/limits.h>
211 #include <linux/rwsem.h>
212 #include <linux/slab.h>
213 #include <linux/spinlock.h>
214 #include <linux/string.h>
215 #include <linux/freezer.h>
216 #include <linux/module.h>
217 
218 #include <linux/usb/ch9.h>
219 #include <linux/usb/gadget.h>
220 #include <linux/usb/composite.h>
221 
222 #include "gadget_chips.h"
223 #include "configfs.h"
224 
225 
226 /*------------------------------------------------------------------------*/
227 
228 #define FSG_DRIVER_DESC		"Mass Storage Function"
229 #define FSG_DRIVER_VERSION	"2009/09/11"
230 
231 static const char fsg_string_interface[] = "Mass Storage";
232 
233 #include "storage_common.h"
234 #include "f_mass_storage.h"
235 
236 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
237 static struct usb_string		fsg_strings[] = {
238 	{FSG_STRING_INTERFACE,		fsg_string_interface},
239 	{}
240 };
241 
242 static struct usb_gadget_strings	fsg_stringtab = {
243 	.language	= 0x0409,		/* en-us */
244 	.strings	= fsg_strings,
245 };
246 
247 static struct usb_gadget_strings *fsg_strings_array[] = {
248 	&fsg_stringtab,
249 	NULL,
250 };
251 
252 /*-------------------------------------------------------------------------*/
253 
254 struct fsg_dev;
255 struct fsg_common;
256 
257 /* Data shared by all the FSG instances. */
258 struct fsg_common {
259 	struct usb_gadget	*gadget;
260 	struct usb_composite_dev *cdev;
261 	struct fsg_dev		*fsg, *new_fsg;
262 	wait_queue_head_t	fsg_wait;
263 
264 	/* filesem protects: backing files in use */
265 	struct rw_semaphore	filesem;
266 
267 	/* lock protects: state, all the req_busy's */
268 	spinlock_t		lock;
269 
270 	struct usb_ep		*ep0;		/* Copy of gadget->ep0 */
271 	struct usb_request	*ep0req;	/* Copy of cdev->req */
272 	unsigned int		ep0_req_tag;
273 
274 	struct fsg_buffhd	*next_buffhd_to_fill;
275 	struct fsg_buffhd	*next_buffhd_to_drain;
276 	struct fsg_buffhd	*buffhds;
277 	unsigned int		fsg_num_buffers;
278 
279 	int			cmnd_size;
280 	u8			cmnd[MAX_COMMAND_SIZE];
281 
282 	unsigned int		nluns;
283 	unsigned int		lun;
284 	struct fsg_lun		**luns;
285 	struct fsg_lun		*curlun;
286 
287 	unsigned int		bulk_out_maxpacket;
288 	enum fsg_state		state;		/* For exception handling */
289 	unsigned int		exception_req_tag;
290 
291 	enum data_direction	data_dir;
292 	u32			data_size;
293 	u32			data_size_from_cmnd;
294 	u32			tag;
295 	u32			residue;
296 	u32			usb_amount_left;
297 
298 	unsigned int		can_stall:1;
299 	unsigned int		free_storage_on_release:1;
300 	unsigned int		phase_error:1;
301 	unsigned int		short_packet_received:1;
302 	unsigned int		bad_lun_okay:1;
303 	unsigned int		running:1;
304 	unsigned int		sysfs:1;
305 
306 	int			thread_wakeup_needed;
307 	struct completion	thread_notifier;
308 	struct task_struct	*thread_task;
309 
310 	/* Callback functions. */
311 	const struct fsg_operations	*ops;
312 	/* Gadget's private data. */
313 	void			*private_data;
314 
315 	/*
316 	 * Vendor (8 chars), product (16 chars), release (4
317 	 * hexadecimal digits) and NUL byte
318 	 */
319 	char inquiry_string[8 + 16 + 4 + 1];
320 
321 	struct kref		ref;
322 };
323 
324 struct fsg_dev {
325 	struct usb_function	function;
326 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
327 	struct fsg_common	*common;
328 
329 	u16			interface_number;
330 
331 	unsigned int		bulk_in_enabled:1;
332 	unsigned int		bulk_out_enabled:1;
333 
334 	unsigned long		atomic_bitflags;
335 #define IGNORE_BULK_OUT		0
336 
337 	struct usb_ep		*bulk_in;
338 	struct usb_ep		*bulk_out;
339 };
340 
341 static inline int __fsg_is_set(struct fsg_common *common,
342 			       const char *func, unsigned line)
343 {
344 	if (common->fsg)
345 		return 1;
346 	ERROR(common, "common->fsg is NULL in %s at %u\n", func, line);
347 	WARN_ON(1);
348 	return 0;
349 }
350 
351 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
352 
353 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
354 {
355 	return container_of(f, struct fsg_dev, function);
356 }
357 
358 typedef void (*fsg_routine_t)(struct fsg_dev *);
359 
360 static int exception_in_progress(struct fsg_common *common)
361 {
362 	return common->state > FSG_STATE_IDLE;
363 }
364 
365 /* Make bulk-out requests be divisible by the maxpacket size */
366 static void set_bulk_out_req_length(struct fsg_common *common,
367 				    struct fsg_buffhd *bh, unsigned int length)
368 {
369 	unsigned int	rem;
370 
371 	bh->bulk_out_intended_length = length;
372 	rem = length % common->bulk_out_maxpacket;
373 	if (rem > 0)
374 		length += common->bulk_out_maxpacket - rem;
375 	bh->outreq->length = length;
376 }
377 
378 
379 /*-------------------------------------------------------------------------*/
380 
381 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
382 {
383 	const char	*name;
384 
385 	if (ep == fsg->bulk_in)
386 		name = "bulk-in";
387 	else if (ep == fsg->bulk_out)
388 		name = "bulk-out";
389 	else
390 		name = ep->name;
391 	DBG(fsg, "%s set halt\n", name);
392 	return usb_ep_set_halt(ep);
393 }
394 
395 
396 /*-------------------------------------------------------------------------*/
397 
398 /* These routines may be called in process context or in_irq */
399 
400 /* Caller must hold fsg->lock */
401 static void wakeup_thread(struct fsg_common *common)
402 {
403 	smp_wmb();	/* ensure the write of bh->state is complete */
404 	/* Tell the main thread that something has happened */
405 	common->thread_wakeup_needed = 1;
406 	if (common->thread_task)
407 		wake_up_process(common->thread_task);
408 }
409 
410 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
411 {
412 	unsigned long		flags;
413 
414 	/*
415 	 * Do nothing if a higher-priority exception is already in progress.
416 	 * If a lower-or-equal priority exception is in progress, preempt it
417 	 * and notify the main thread by sending it a signal.
418 	 */
419 	spin_lock_irqsave(&common->lock, flags);
420 	if (common->state <= new_state) {
421 		common->exception_req_tag = common->ep0_req_tag;
422 		common->state = new_state;
423 		if (common->thread_task)
424 			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
425 				      common->thread_task);
426 	}
427 	spin_unlock_irqrestore(&common->lock, flags);
428 }
429 
430 
431 /*-------------------------------------------------------------------------*/
432 
433 static int ep0_queue(struct fsg_common *common)
434 {
435 	int	rc;
436 
437 	rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC);
438 	common->ep0->driver_data = common;
439 	if (rc != 0 && rc != -ESHUTDOWN) {
440 		/* We can't do much more than wait for a reset */
441 		WARNING(common, "error in submission: %s --> %d\n",
442 			common->ep0->name, rc);
443 	}
444 	return rc;
445 }
446 
447 
448 /*-------------------------------------------------------------------------*/
449 
450 /* Completion handlers. These always run in_irq. */
451 
452 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
453 {
454 	struct fsg_common	*common = ep->driver_data;
455 	struct fsg_buffhd	*bh = req->context;
456 
457 	if (req->status || req->actual != req->length)
458 		DBG(common, "%s --> %d, %u/%u\n", __func__,
459 		    req->status, req->actual, req->length);
460 	if (req->status == -ECONNRESET)		/* Request was cancelled */
461 		usb_ep_fifo_flush(ep);
462 
463 	/* Hold the lock while we update the request and buffer states */
464 	smp_wmb();
465 	spin_lock(&common->lock);
466 	bh->inreq_busy = 0;
467 	bh->state = BUF_STATE_EMPTY;
468 	wakeup_thread(common);
469 	spin_unlock(&common->lock);
470 }
471 
472 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
473 {
474 	struct fsg_common	*common = ep->driver_data;
475 	struct fsg_buffhd	*bh = req->context;
476 
477 	dump_msg(common, "bulk-out", req->buf, req->actual);
478 	if (req->status || req->actual != bh->bulk_out_intended_length)
479 		DBG(common, "%s --> %d, %u/%u\n", __func__,
480 		    req->status, req->actual, bh->bulk_out_intended_length);
481 	if (req->status == -ECONNRESET)		/* Request was cancelled */
482 		usb_ep_fifo_flush(ep);
483 
484 	/* Hold the lock while we update the request and buffer states */
485 	smp_wmb();
486 	spin_lock(&common->lock);
487 	bh->outreq_busy = 0;
488 	bh->state = BUF_STATE_FULL;
489 	wakeup_thread(common);
490 	spin_unlock(&common->lock);
491 }
492 
493 static int fsg_setup(struct usb_function *f,
494 		     const struct usb_ctrlrequest *ctrl)
495 {
496 	struct fsg_dev		*fsg = fsg_from_func(f);
497 	struct usb_request	*req = fsg->common->ep0req;
498 	u16			w_index = le16_to_cpu(ctrl->wIndex);
499 	u16			w_value = le16_to_cpu(ctrl->wValue);
500 	u16			w_length = le16_to_cpu(ctrl->wLength);
501 
502 	if (!fsg_is_set(fsg->common))
503 		return -EOPNOTSUPP;
504 
505 	++fsg->common->ep0_req_tag;	/* Record arrival of a new request */
506 	req->context = NULL;
507 	req->length = 0;
508 	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
509 
510 	switch (ctrl->bRequest) {
511 
512 	case US_BULK_RESET_REQUEST:
513 		if (ctrl->bRequestType !=
514 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
515 			break;
516 		if (w_index != fsg->interface_number || w_value != 0 ||
517 				w_length != 0)
518 			return -EDOM;
519 
520 		/*
521 		 * Raise an exception to stop the current operation
522 		 * and reinitialize our state.
523 		 */
524 		DBG(fsg, "bulk reset request\n");
525 		raise_exception(fsg->common, FSG_STATE_RESET);
526 		return USB_GADGET_DELAYED_STATUS;
527 
528 	case US_BULK_GET_MAX_LUN:
529 		if (ctrl->bRequestType !=
530 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
531 			break;
532 		if (w_index != fsg->interface_number || w_value != 0 ||
533 				w_length != 1)
534 			return -EDOM;
535 		VDBG(fsg, "get max LUN\n");
536 		*(u8 *)req->buf = fsg->common->nluns - 1;
537 
538 		/* Respond with data/status */
539 		req->length = min((u16)1, w_length);
540 		return ep0_queue(fsg->common);
541 	}
542 
543 	VDBG(fsg,
544 	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
545 	     ctrl->bRequestType, ctrl->bRequest,
546 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
547 	return -EOPNOTSUPP;
548 }
549 
550 
551 /*-------------------------------------------------------------------------*/
552 
553 /* All the following routines run in process context */
554 
555 /* Use this for bulk or interrupt transfers, not ep0 */
556 static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
557 			   struct usb_request *req, int *pbusy,
558 			   enum fsg_buffer_state *state)
559 {
560 	int	rc;
561 
562 	if (ep == fsg->bulk_in)
563 		dump_msg(fsg, "bulk-in", req->buf, req->length);
564 
565 	spin_lock_irq(&fsg->common->lock);
566 	*pbusy = 1;
567 	*state = BUF_STATE_BUSY;
568 	spin_unlock_irq(&fsg->common->lock);
569 
570 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
571 	if (rc == 0)
572 		return;  /* All good, we're done */
573 
574 	*pbusy = 0;
575 	*state = BUF_STATE_EMPTY;
576 
577 	/* We can't do much more than wait for a reset */
578 
579 	/*
580 	 * Note: currently the net2280 driver fails zero-length
581 	 * submissions if DMA is enabled.
582 	 */
583 	if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && req->length == 0))
584 		WARNING(fsg, "error in submission: %s --> %d\n", ep->name, rc);
585 }
586 
587 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
588 {
589 	if (!fsg_is_set(common))
590 		return false;
591 	start_transfer(common->fsg, common->fsg->bulk_in,
592 		       bh->inreq, &bh->inreq_busy, &bh->state);
593 	return true;
594 }
595 
596 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
597 {
598 	if (!fsg_is_set(common))
599 		return false;
600 	start_transfer(common->fsg, common->fsg->bulk_out,
601 		       bh->outreq, &bh->outreq_busy, &bh->state);
602 	return true;
603 }
604 
605 static int sleep_thread(struct fsg_common *common, bool can_freeze)
606 {
607 	int	rc = 0;
608 
609 	/* Wait until a signal arrives or we are woken up */
610 	for (;;) {
611 		if (can_freeze)
612 			try_to_freeze();
613 		set_current_state(TASK_INTERRUPTIBLE);
614 		if (signal_pending(current)) {
615 			rc = -EINTR;
616 			break;
617 		}
618 		if (common->thread_wakeup_needed)
619 			break;
620 		schedule();
621 	}
622 	__set_current_state(TASK_RUNNING);
623 	common->thread_wakeup_needed = 0;
624 	smp_rmb();	/* ensure the latest bh->state is visible */
625 	return rc;
626 }
627 
628 
629 /*-------------------------------------------------------------------------*/
630 
631 static int do_read(struct fsg_common *common)
632 {
633 	struct fsg_lun		*curlun = common->curlun;
634 	u32			lba;
635 	struct fsg_buffhd	*bh;
636 	int			rc;
637 	u32			amount_left;
638 	loff_t			file_offset, file_offset_tmp;
639 	unsigned int		amount;
640 	ssize_t			nread;
641 
642 	/*
643 	 * Get the starting Logical Block Address and check that it's
644 	 * not too big.
645 	 */
646 	if (common->cmnd[0] == READ_6)
647 		lba = get_unaligned_be24(&common->cmnd[1]);
648 	else {
649 		lba = get_unaligned_be32(&common->cmnd[2]);
650 
651 		/*
652 		 * We allow DPO (Disable Page Out = don't save data in the
653 		 * cache) and FUA (Force Unit Access = don't read from the
654 		 * cache), but we don't implement them.
655 		 */
656 		if ((common->cmnd[1] & ~0x18) != 0) {
657 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
658 			return -EINVAL;
659 		}
660 	}
661 	if (lba >= curlun->num_sectors) {
662 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
663 		return -EINVAL;
664 	}
665 	file_offset = ((loff_t) lba) << curlun->blkbits;
666 
667 	/* Carry out the file reads */
668 	amount_left = common->data_size_from_cmnd;
669 	if (unlikely(amount_left == 0))
670 		return -EIO;		/* No default reply */
671 
672 	for (;;) {
673 		/*
674 		 * Figure out how much we need to read:
675 		 * Try to read the remaining amount.
676 		 * But don't read more than the buffer size.
677 		 * And don't try to read past the end of the file.
678 		 */
679 		amount = min(amount_left, FSG_BUFLEN);
680 		amount = min((loff_t)amount,
681 			     curlun->file_length - file_offset);
682 
683 		/* Wait for the next buffer to become available */
684 		bh = common->next_buffhd_to_fill;
685 		while (bh->state != BUF_STATE_EMPTY) {
686 			rc = sleep_thread(common, false);
687 			if (rc)
688 				return rc;
689 		}
690 
691 		/*
692 		 * If we were asked to read past the end of file,
693 		 * end with an empty buffer.
694 		 */
695 		if (amount == 0) {
696 			curlun->sense_data =
697 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
698 			curlun->sense_data_info =
699 					file_offset >> curlun->blkbits;
700 			curlun->info_valid = 1;
701 			bh->inreq->length = 0;
702 			bh->state = BUF_STATE_FULL;
703 			break;
704 		}
705 
706 		/* Perform the read */
707 		file_offset_tmp = file_offset;
708 		nread = vfs_read(curlun->filp,
709 				 (char __user *)bh->buf,
710 				 amount, &file_offset_tmp);
711 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
712 		      (unsigned long long)file_offset, (int)nread);
713 		if (signal_pending(current))
714 			return -EINTR;
715 
716 		if (nread < 0) {
717 			LDBG(curlun, "error in file read: %d\n", (int)nread);
718 			nread = 0;
719 		} else if (nread < amount) {
720 			LDBG(curlun, "partial file read: %d/%u\n",
721 			     (int)nread, amount);
722 			nread = round_down(nread, curlun->blksize);
723 		}
724 		file_offset  += nread;
725 		amount_left  -= nread;
726 		common->residue -= nread;
727 
728 		/*
729 		 * Except at the end of the transfer, nread will be
730 		 * equal to the buffer size, which is divisible by the
731 		 * bulk-in maxpacket size.
732 		 */
733 		bh->inreq->length = nread;
734 		bh->state = BUF_STATE_FULL;
735 
736 		/* If an error occurred, report it and its position */
737 		if (nread < amount) {
738 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
739 			curlun->sense_data_info =
740 					file_offset >> curlun->blkbits;
741 			curlun->info_valid = 1;
742 			break;
743 		}
744 
745 		if (amount_left == 0)
746 			break;		/* No more left to read */
747 
748 		/* Send this buffer and go read some more */
749 		bh->inreq->zero = 0;
750 		if (!start_in_transfer(common, bh))
751 			/* Don't know what to do if common->fsg is NULL */
752 			return -EIO;
753 		common->next_buffhd_to_fill = bh->next;
754 	}
755 
756 	return -EIO;		/* No default reply */
757 }
758 
759 
760 /*-------------------------------------------------------------------------*/
761 
762 static int do_write(struct fsg_common *common)
763 {
764 	struct fsg_lun		*curlun = common->curlun;
765 	u32			lba;
766 	struct fsg_buffhd	*bh;
767 	int			get_some_more;
768 	u32			amount_left_to_req, amount_left_to_write;
769 	loff_t			usb_offset, file_offset, file_offset_tmp;
770 	unsigned int		amount;
771 	ssize_t			nwritten;
772 	int			rc;
773 
774 	if (curlun->ro) {
775 		curlun->sense_data = SS_WRITE_PROTECTED;
776 		return -EINVAL;
777 	}
778 	spin_lock(&curlun->filp->f_lock);
779 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
780 	spin_unlock(&curlun->filp->f_lock);
781 
782 	/*
783 	 * Get the starting Logical Block Address and check that it's
784 	 * not too big
785 	 */
786 	if (common->cmnd[0] == WRITE_6)
787 		lba = get_unaligned_be24(&common->cmnd[1]);
788 	else {
789 		lba = get_unaligned_be32(&common->cmnd[2]);
790 
791 		/*
792 		 * We allow DPO (Disable Page Out = don't save data in the
793 		 * cache) and FUA (Force Unit Access = write directly to the
794 		 * medium).  We don't implement DPO; we implement FUA by
795 		 * performing synchronous output.
796 		 */
797 		if (common->cmnd[1] & ~0x18) {
798 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
799 			return -EINVAL;
800 		}
801 		if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */
802 			spin_lock(&curlun->filp->f_lock);
803 			curlun->filp->f_flags |= O_SYNC;
804 			spin_unlock(&curlun->filp->f_lock);
805 		}
806 	}
807 	if (lba >= curlun->num_sectors) {
808 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
809 		return -EINVAL;
810 	}
811 
812 	/* Carry out the file writes */
813 	get_some_more = 1;
814 	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
815 	amount_left_to_req = common->data_size_from_cmnd;
816 	amount_left_to_write = common->data_size_from_cmnd;
817 
818 	while (amount_left_to_write > 0) {
819 
820 		/* Queue a request for more data from the host */
821 		bh = common->next_buffhd_to_fill;
822 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
823 
824 			/*
825 			 * Figure out how much we want to get:
826 			 * Try to get the remaining amount,
827 			 * but not more than the buffer size.
828 			 */
829 			amount = min(amount_left_to_req, FSG_BUFLEN);
830 
831 			/* Beyond the end of the backing file? */
832 			if (usb_offset >= curlun->file_length) {
833 				get_some_more = 0;
834 				curlun->sense_data =
835 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
836 				curlun->sense_data_info =
837 					usb_offset >> curlun->blkbits;
838 				curlun->info_valid = 1;
839 				continue;
840 			}
841 
842 			/* Get the next buffer */
843 			usb_offset += amount;
844 			common->usb_amount_left -= amount;
845 			amount_left_to_req -= amount;
846 			if (amount_left_to_req == 0)
847 				get_some_more = 0;
848 
849 			/*
850 			 * Except at the end of the transfer, amount will be
851 			 * equal to the buffer size, which is divisible by
852 			 * the bulk-out maxpacket size.
853 			 */
854 			set_bulk_out_req_length(common, bh, amount);
855 			if (!start_out_transfer(common, bh))
856 				/* Dunno what to do if common->fsg is NULL */
857 				return -EIO;
858 			common->next_buffhd_to_fill = bh->next;
859 			continue;
860 		}
861 
862 		/* Write the received data to the backing file */
863 		bh = common->next_buffhd_to_drain;
864 		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
865 			break;			/* We stopped early */
866 		if (bh->state == BUF_STATE_FULL) {
867 			smp_rmb();
868 			common->next_buffhd_to_drain = bh->next;
869 			bh->state = BUF_STATE_EMPTY;
870 
871 			/* Did something go wrong with the transfer? */
872 			if (bh->outreq->status != 0) {
873 				curlun->sense_data = SS_COMMUNICATION_FAILURE;
874 				curlun->sense_data_info =
875 					file_offset >> curlun->blkbits;
876 				curlun->info_valid = 1;
877 				break;
878 			}
879 
880 			amount = bh->outreq->actual;
881 			if (curlun->file_length - file_offset < amount) {
882 				LERROR(curlun,
883 				       "write %u @ %llu beyond end %llu\n",
884 				       amount, (unsigned long long)file_offset,
885 				       (unsigned long long)curlun->file_length);
886 				amount = curlun->file_length - file_offset;
887 			}
888 
889 			/* Don't accept excess data.  The spec doesn't say
890 			 * what to do in this case.  We'll ignore the error.
891 			 */
892 			amount = min(amount, bh->bulk_out_intended_length);
893 
894 			/* Don't write a partial block */
895 			amount = round_down(amount, curlun->blksize);
896 			if (amount == 0)
897 				goto empty_write;
898 
899 			/* Perform the write */
900 			file_offset_tmp = file_offset;
901 			nwritten = vfs_write(curlun->filp,
902 					     (char __user *)bh->buf,
903 					     amount, &file_offset_tmp);
904 			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
905 			      (unsigned long long)file_offset, (int)nwritten);
906 			if (signal_pending(current))
907 				return -EINTR;		/* Interrupted! */
908 
909 			if (nwritten < 0) {
910 				LDBG(curlun, "error in file write: %d\n",
911 				     (int)nwritten);
912 				nwritten = 0;
913 			} else if (nwritten < amount) {
914 				LDBG(curlun, "partial file write: %d/%u\n",
915 				     (int)nwritten, amount);
916 				nwritten = round_down(nwritten, curlun->blksize);
917 			}
918 			file_offset += nwritten;
919 			amount_left_to_write -= nwritten;
920 			common->residue -= nwritten;
921 
922 			/* If an error occurred, report it and its position */
923 			if (nwritten < amount) {
924 				curlun->sense_data = SS_WRITE_ERROR;
925 				curlun->sense_data_info =
926 					file_offset >> curlun->blkbits;
927 				curlun->info_valid = 1;
928 				break;
929 			}
930 
931  empty_write:
932 			/* Did the host decide to stop early? */
933 			if (bh->outreq->actual < bh->bulk_out_intended_length) {
934 				common->short_packet_received = 1;
935 				break;
936 			}
937 			continue;
938 		}
939 
940 		/* Wait for something to happen */
941 		rc = sleep_thread(common, false);
942 		if (rc)
943 			return rc;
944 	}
945 
946 	return -EIO;		/* No default reply */
947 }
948 
949 
950 /*-------------------------------------------------------------------------*/
951 
952 static int do_synchronize_cache(struct fsg_common *common)
953 {
954 	struct fsg_lun	*curlun = common->curlun;
955 	int		rc;
956 
957 	/* We ignore the requested LBA and write out all file's
958 	 * dirty data buffers. */
959 	rc = fsg_lun_fsync_sub(curlun);
960 	if (rc)
961 		curlun->sense_data = SS_WRITE_ERROR;
962 	return 0;
963 }
964 
965 
966 /*-------------------------------------------------------------------------*/
967 
968 static void invalidate_sub(struct fsg_lun *curlun)
969 {
970 	struct file	*filp = curlun->filp;
971 	struct inode	*inode = file_inode(filp);
972 	unsigned long	rc;
973 
974 	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
975 	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
976 }
977 
978 static int do_verify(struct fsg_common *common)
979 {
980 	struct fsg_lun		*curlun = common->curlun;
981 	u32			lba;
982 	u32			verification_length;
983 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
984 	loff_t			file_offset, file_offset_tmp;
985 	u32			amount_left;
986 	unsigned int		amount;
987 	ssize_t			nread;
988 
989 	/*
990 	 * Get the starting Logical Block Address and check that it's
991 	 * not too big.
992 	 */
993 	lba = get_unaligned_be32(&common->cmnd[2]);
994 	if (lba >= curlun->num_sectors) {
995 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
996 		return -EINVAL;
997 	}
998 
999 	/*
1000 	 * We allow DPO (Disable Page Out = don't save data in the
1001 	 * cache) but we don't implement it.
1002 	 */
1003 	if (common->cmnd[1] & ~0x10) {
1004 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1005 		return -EINVAL;
1006 	}
1007 
1008 	verification_length = get_unaligned_be16(&common->cmnd[7]);
1009 	if (unlikely(verification_length == 0))
1010 		return -EIO;		/* No default reply */
1011 
1012 	/* Prepare to carry out the file verify */
1013 	amount_left = verification_length << curlun->blkbits;
1014 	file_offset = ((loff_t) lba) << curlun->blkbits;
1015 
1016 	/* Write out all the dirty buffers before invalidating them */
1017 	fsg_lun_fsync_sub(curlun);
1018 	if (signal_pending(current))
1019 		return -EINTR;
1020 
1021 	invalidate_sub(curlun);
1022 	if (signal_pending(current))
1023 		return -EINTR;
1024 
1025 	/* Just try to read the requested blocks */
1026 	while (amount_left > 0) {
1027 		/*
1028 		 * Figure out how much we need to read:
1029 		 * Try to read the remaining amount, but not more than
1030 		 * the buffer size.
1031 		 * And don't try to read past the end of the file.
1032 		 */
1033 		amount = min(amount_left, FSG_BUFLEN);
1034 		amount = min((loff_t)amount,
1035 			     curlun->file_length - file_offset);
1036 		if (amount == 0) {
1037 			curlun->sense_data =
1038 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1039 			curlun->sense_data_info =
1040 				file_offset >> curlun->blkbits;
1041 			curlun->info_valid = 1;
1042 			break;
1043 		}
1044 
1045 		/* Perform the read */
1046 		file_offset_tmp = file_offset;
1047 		nread = vfs_read(curlun->filp,
1048 				(char __user *) bh->buf,
1049 				amount, &file_offset_tmp);
1050 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
1051 				(unsigned long long) file_offset,
1052 				(int) nread);
1053 		if (signal_pending(current))
1054 			return -EINTR;
1055 
1056 		if (nread < 0) {
1057 			LDBG(curlun, "error in file verify: %d\n", (int)nread);
1058 			nread = 0;
1059 		} else if (nread < amount) {
1060 			LDBG(curlun, "partial file verify: %d/%u\n",
1061 			     (int)nread, amount);
1062 			nread = round_down(nread, curlun->blksize);
1063 		}
1064 		if (nread == 0) {
1065 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
1066 			curlun->sense_data_info =
1067 				file_offset >> curlun->blkbits;
1068 			curlun->info_valid = 1;
1069 			break;
1070 		}
1071 		file_offset += nread;
1072 		amount_left -= nread;
1073 	}
1074 	return 0;
1075 }
1076 
1077 
1078 /*-------------------------------------------------------------------------*/
1079 
1080 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
1081 {
1082 	struct fsg_lun *curlun = common->curlun;
1083 	u8	*buf = (u8 *) bh->buf;
1084 
1085 	if (!curlun) {		/* Unsupported LUNs are okay */
1086 		common->bad_lun_okay = 1;
1087 		memset(buf, 0, 36);
1088 		buf[0] = 0x7f;		/* Unsupported, no device-type */
1089 		buf[4] = 31;		/* Additional length */
1090 		return 36;
1091 	}
1092 
1093 	buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK;
1094 	buf[1] = curlun->removable ? 0x80 : 0;
1095 	buf[2] = 2;		/* ANSI SCSI level 2 */
1096 	buf[3] = 2;		/* SCSI-2 INQUIRY data format */
1097 	buf[4] = 31;		/* Additional length */
1098 	buf[5] = 0;		/* No special options */
1099 	buf[6] = 0;
1100 	buf[7] = 0;
1101 	memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string);
1102 	return 36;
1103 }
1104 
1105 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1106 {
1107 	struct fsg_lun	*curlun = common->curlun;
1108 	u8		*buf = (u8 *) bh->buf;
1109 	u32		sd, sdinfo;
1110 	int		valid;
1111 
1112 	/*
1113 	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
1114 	 *
1115 	 * If a REQUEST SENSE command is received from an initiator
1116 	 * with a pending unit attention condition (before the target
1117 	 * generates the contingent allegiance condition), then the
1118 	 * target shall either:
1119 	 *   a) report any pending sense data and preserve the unit
1120 	 *	attention condition on the logical unit, or,
1121 	 *   b) report the unit attention condition, may discard any
1122 	 *	pending sense data, and clear the unit attention
1123 	 *	condition on the logical unit for that initiator.
1124 	 *
1125 	 * FSG normally uses option a); enable this code to use option b).
1126 	 */
1127 #if 0
1128 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
1129 		curlun->sense_data = curlun->unit_attention_data;
1130 		curlun->unit_attention_data = SS_NO_SENSE;
1131 	}
1132 #endif
1133 
1134 	if (!curlun) {		/* Unsupported LUNs are okay */
1135 		common->bad_lun_okay = 1;
1136 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1137 		sdinfo = 0;
1138 		valid = 0;
1139 	} else {
1140 		sd = curlun->sense_data;
1141 		sdinfo = curlun->sense_data_info;
1142 		valid = curlun->info_valid << 7;
1143 		curlun->sense_data = SS_NO_SENSE;
1144 		curlun->sense_data_info = 0;
1145 		curlun->info_valid = 0;
1146 	}
1147 
1148 	memset(buf, 0, 18);
1149 	buf[0] = valid | 0x70;			/* Valid, current error */
1150 	buf[2] = SK(sd);
1151 	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
1152 	buf[7] = 18 - 8;			/* Additional sense length */
1153 	buf[12] = ASC(sd);
1154 	buf[13] = ASCQ(sd);
1155 	return 18;
1156 }
1157 
1158 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
1159 {
1160 	struct fsg_lun	*curlun = common->curlun;
1161 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1162 	int		pmi = common->cmnd[8];
1163 	u8		*buf = (u8 *)bh->buf;
1164 
1165 	/* Check the PMI and LBA fields */
1166 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
1167 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1168 		return -EINVAL;
1169 	}
1170 
1171 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
1172 						/* Max logical block */
1173 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1174 	return 8;
1175 }
1176 
1177 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
1178 {
1179 	struct fsg_lun	*curlun = common->curlun;
1180 	int		msf = common->cmnd[1] & 0x02;
1181 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
1182 	u8		*buf = (u8 *)bh->buf;
1183 
1184 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
1185 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1186 		return -EINVAL;
1187 	}
1188 	if (lba >= curlun->num_sectors) {
1189 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
1190 		return -EINVAL;
1191 	}
1192 
1193 	memset(buf, 0, 8);
1194 	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
1195 	store_cdrom_address(&buf[4], msf, lba);
1196 	return 8;
1197 }
1198 
1199 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
1200 {
1201 	struct fsg_lun	*curlun = common->curlun;
1202 	int		msf = common->cmnd[1] & 0x02;
1203 	int		start_track = common->cmnd[6];
1204 	u8		*buf = (u8 *)bh->buf;
1205 
1206 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
1207 			start_track > 1) {
1208 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1209 		return -EINVAL;
1210 	}
1211 
1212 	memset(buf, 0, 20);
1213 	buf[1] = (20-2);		/* TOC data length */
1214 	buf[2] = 1;			/* First track number */
1215 	buf[3] = 1;			/* Last track number */
1216 	buf[5] = 0x16;			/* Data track, copying allowed */
1217 	buf[6] = 0x01;			/* Only track is number 1 */
1218 	store_cdrom_address(&buf[8], msf, 0);
1219 
1220 	buf[13] = 0x16;			/* Lead-out track is data */
1221 	buf[14] = 0xAA;			/* Lead-out track number */
1222 	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
1223 	return 20;
1224 }
1225 
1226 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
1227 {
1228 	struct fsg_lun	*curlun = common->curlun;
1229 	int		mscmnd = common->cmnd[0];
1230 	u8		*buf = (u8 *) bh->buf;
1231 	u8		*buf0 = buf;
1232 	int		pc, page_code;
1233 	int		changeable_values, all_pages;
1234 	int		valid_page = 0;
1235 	int		len, limit;
1236 
1237 	if ((common->cmnd[1] & ~0x08) != 0) {	/* Mask away DBD */
1238 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1239 		return -EINVAL;
1240 	}
1241 	pc = common->cmnd[2] >> 6;
1242 	page_code = common->cmnd[2] & 0x3f;
1243 	if (pc == 3) {
1244 		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
1245 		return -EINVAL;
1246 	}
1247 	changeable_values = (pc == 1);
1248 	all_pages = (page_code == 0x3f);
1249 
1250 	/*
1251 	 * Write the mode parameter header.  Fixed values are: default
1252 	 * medium type, no cache control (DPOFUA), and no block descriptors.
1253 	 * The only variable value is the WriteProtect bit.  We will fill in
1254 	 * the mode data length later.
1255 	 */
1256 	memset(buf, 0, 8);
1257 	if (mscmnd == MODE_SENSE) {
1258 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1259 		buf += 4;
1260 		limit = 255;
1261 	} else {			/* MODE_SENSE_10 */
1262 		buf[3] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
1263 		buf += 8;
1264 		limit = 65535;		/* Should really be FSG_BUFLEN */
1265 	}
1266 
1267 	/* No block descriptors */
1268 
1269 	/*
1270 	 * The mode pages, in numerical order.  The only page we support
1271 	 * is the Caching page.
1272 	 */
1273 	if (page_code == 0x08 || all_pages) {
1274 		valid_page = 1;
1275 		buf[0] = 0x08;		/* Page code */
1276 		buf[1] = 10;		/* Page length */
1277 		memset(buf+2, 0, 10);	/* None of the fields are changeable */
1278 
1279 		if (!changeable_values) {
1280 			buf[2] = 0x04;	/* Write cache enable, */
1281 					/* Read cache not disabled */
1282 					/* No cache retention priorities */
1283 			put_unaligned_be16(0xffff, &buf[4]);
1284 					/* Don't disable prefetch */
1285 					/* Minimum prefetch = 0 */
1286 			put_unaligned_be16(0xffff, &buf[8]);
1287 					/* Maximum prefetch */
1288 			put_unaligned_be16(0xffff, &buf[10]);
1289 					/* Maximum prefetch ceiling */
1290 		}
1291 		buf += 12;
1292 	}
1293 
1294 	/*
1295 	 * Check that a valid page was requested and the mode data length
1296 	 * isn't too long.
1297 	 */
1298 	len = buf - buf0;
1299 	if (!valid_page || len > limit) {
1300 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1301 		return -EINVAL;
1302 	}
1303 
1304 	/*  Store the mode data length */
1305 	if (mscmnd == MODE_SENSE)
1306 		buf0[0] = len - 1;
1307 	else
1308 		put_unaligned_be16(len - 2, buf0);
1309 	return len;
1310 }
1311 
1312 static int do_start_stop(struct fsg_common *common)
1313 {
1314 	struct fsg_lun	*curlun = common->curlun;
1315 	int		loej, start;
1316 
1317 	if (!curlun) {
1318 		return -EINVAL;
1319 	} else if (!curlun->removable) {
1320 		curlun->sense_data = SS_INVALID_COMMAND;
1321 		return -EINVAL;
1322 	} else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */
1323 		   (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
1324 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1325 		return -EINVAL;
1326 	}
1327 
1328 	loej  = common->cmnd[4] & 0x02;
1329 	start = common->cmnd[4] & 0x01;
1330 
1331 	/*
1332 	 * Our emulation doesn't support mounting; the medium is
1333 	 * available for use as soon as it is loaded.
1334 	 */
1335 	if (start) {
1336 		if (!fsg_lun_is_open(curlun)) {
1337 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1338 			return -EINVAL;
1339 		}
1340 		return 0;
1341 	}
1342 
1343 	/* Are we allowed to unload the media? */
1344 	if (curlun->prevent_medium_removal) {
1345 		LDBG(curlun, "unload attempt prevented\n");
1346 		curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
1347 		return -EINVAL;
1348 	}
1349 
1350 	if (!loej)
1351 		return 0;
1352 
1353 	up_read(&common->filesem);
1354 	down_write(&common->filesem);
1355 	fsg_lun_close(curlun);
1356 	up_write(&common->filesem);
1357 	down_read(&common->filesem);
1358 
1359 	return 0;
1360 }
1361 
1362 static int do_prevent_allow(struct fsg_common *common)
1363 {
1364 	struct fsg_lun	*curlun = common->curlun;
1365 	int		prevent;
1366 
1367 	if (!common->curlun) {
1368 		return -EINVAL;
1369 	} else if (!common->curlun->removable) {
1370 		common->curlun->sense_data = SS_INVALID_COMMAND;
1371 		return -EINVAL;
1372 	}
1373 
1374 	prevent = common->cmnd[4] & 0x01;
1375 	if ((common->cmnd[4] & ~0x01) != 0) {	/* Mask away Prevent */
1376 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1377 		return -EINVAL;
1378 	}
1379 
1380 	if (curlun->prevent_medium_removal && !prevent)
1381 		fsg_lun_fsync_sub(curlun);
1382 	curlun->prevent_medium_removal = prevent;
1383 	return 0;
1384 }
1385 
1386 static int do_read_format_capacities(struct fsg_common *common,
1387 			struct fsg_buffhd *bh)
1388 {
1389 	struct fsg_lun	*curlun = common->curlun;
1390 	u8		*buf = (u8 *) bh->buf;
1391 
1392 	buf[0] = buf[1] = buf[2] = 0;
1393 	buf[3] = 8;	/* Only the Current/Maximum Capacity Descriptor */
1394 	buf += 4;
1395 
1396 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
1397 						/* Number of blocks */
1398 	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
1399 	buf[4] = 0x02;				/* Current capacity */
1400 	return 12;
1401 }
1402 
1403 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
1404 {
1405 	struct fsg_lun	*curlun = common->curlun;
1406 
1407 	/* We don't support MODE SELECT */
1408 	if (curlun)
1409 		curlun->sense_data = SS_INVALID_COMMAND;
1410 	return -EINVAL;
1411 }
1412 
1413 
1414 /*-------------------------------------------------------------------------*/
1415 
1416 static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
1417 {
1418 	int	rc;
1419 
1420 	rc = fsg_set_halt(fsg, fsg->bulk_in);
1421 	if (rc == -EAGAIN)
1422 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
1423 	while (rc != 0) {
1424 		if (rc != -EAGAIN) {
1425 			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
1426 			rc = 0;
1427 			break;
1428 		}
1429 
1430 		/* Wait for a short time and then try again */
1431 		if (msleep_interruptible(100) != 0)
1432 			return -EINTR;
1433 		rc = usb_ep_set_halt(fsg->bulk_in);
1434 	}
1435 	return rc;
1436 }
1437 
1438 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
1439 {
1440 	int	rc;
1441 
1442 	DBG(fsg, "bulk-in set wedge\n");
1443 	rc = usb_ep_set_wedge(fsg->bulk_in);
1444 	if (rc == -EAGAIN)
1445 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
1446 	while (rc != 0) {
1447 		if (rc != -EAGAIN) {
1448 			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
1449 			rc = 0;
1450 			break;
1451 		}
1452 
1453 		/* Wait for a short time and then try again */
1454 		if (msleep_interruptible(100) != 0)
1455 			return -EINTR;
1456 		rc = usb_ep_set_wedge(fsg->bulk_in);
1457 	}
1458 	return rc;
1459 }
1460 
1461 static int throw_away_data(struct fsg_common *common)
1462 {
1463 	struct fsg_buffhd	*bh;
1464 	u32			amount;
1465 	int			rc;
1466 
1467 	for (bh = common->next_buffhd_to_drain;
1468 	     bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0;
1469 	     bh = common->next_buffhd_to_drain) {
1470 
1471 		/* Throw away the data in a filled buffer */
1472 		if (bh->state == BUF_STATE_FULL) {
1473 			smp_rmb();
1474 			bh->state = BUF_STATE_EMPTY;
1475 			common->next_buffhd_to_drain = bh->next;
1476 
1477 			/* A short packet or an error ends everything */
1478 			if (bh->outreq->actual < bh->bulk_out_intended_length ||
1479 			    bh->outreq->status != 0) {
1480 				raise_exception(common,
1481 						FSG_STATE_ABORT_BULK_OUT);
1482 				return -EINTR;
1483 			}
1484 			continue;
1485 		}
1486 
1487 		/* Try to submit another request if we need one */
1488 		bh = common->next_buffhd_to_fill;
1489 		if (bh->state == BUF_STATE_EMPTY
1490 		 && common->usb_amount_left > 0) {
1491 			amount = min(common->usb_amount_left, FSG_BUFLEN);
1492 
1493 			/*
1494 			 * Except at the end of the transfer, amount will be
1495 			 * equal to the buffer size, which is divisible by
1496 			 * the bulk-out maxpacket size.
1497 			 */
1498 			set_bulk_out_req_length(common, bh, amount);
1499 			if (!start_out_transfer(common, bh))
1500 				/* Dunno what to do if common->fsg is NULL */
1501 				return -EIO;
1502 			common->next_buffhd_to_fill = bh->next;
1503 			common->usb_amount_left -= amount;
1504 			continue;
1505 		}
1506 
1507 		/* Otherwise wait for something to happen */
1508 		rc = sleep_thread(common, true);
1509 		if (rc)
1510 			return rc;
1511 	}
1512 	return 0;
1513 }
1514 
1515 static int finish_reply(struct fsg_common *common)
1516 {
1517 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
1518 	int			rc = 0;
1519 
1520 	switch (common->data_dir) {
1521 	case DATA_DIR_NONE:
1522 		break;			/* Nothing to send */
1523 
1524 	/*
1525 	 * If we don't know whether the host wants to read or write,
1526 	 * this must be CB or CBI with an unknown command.  We mustn't
1527 	 * try to send or receive any data.  So stall both bulk pipes
1528 	 * if we can and wait for a reset.
1529 	 */
1530 	case DATA_DIR_UNKNOWN:
1531 		if (!common->can_stall) {
1532 			/* Nothing */
1533 		} else if (fsg_is_set(common)) {
1534 			fsg_set_halt(common->fsg, common->fsg->bulk_out);
1535 			rc = halt_bulk_in_endpoint(common->fsg);
1536 		} else {
1537 			/* Don't know what to do if common->fsg is NULL */
1538 			rc = -EIO;
1539 		}
1540 		break;
1541 
1542 	/* All but the last buffer of data must have already been sent */
1543 	case DATA_DIR_TO_HOST:
1544 		if (common->data_size == 0) {
1545 			/* Nothing to send */
1546 
1547 		/* Don't know what to do if common->fsg is NULL */
1548 		} else if (!fsg_is_set(common)) {
1549 			rc = -EIO;
1550 
1551 		/* If there's no residue, simply send the last buffer */
1552 		} else if (common->residue == 0) {
1553 			bh->inreq->zero = 0;
1554 			if (!start_in_transfer(common, bh))
1555 				return -EIO;
1556 			common->next_buffhd_to_fill = bh->next;
1557 
1558 		/*
1559 		 * For Bulk-only, mark the end of the data with a short
1560 		 * packet.  If we are allowed to stall, halt the bulk-in
1561 		 * endpoint.  (Note: This violates the Bulk-Only Transport
1562 		 * specification, which requires us to pad the data if we
1563 		 * don't halt the endpoint.  Presumably nobody will mind.)
1564 		 */
1565 		} else {
1566 			bh->inreq->zero = 1;
1567 			if (!start_in_transfer(common, bh))
1568 				rc = -EIO;
1569 			common->next_buffhd_to_fill = bh->next;
1570 			if (common->can_stall)
1571 				rc = halt_bulk_in_endpoint(common->fsg);
1572 		}
1573 		break;
1574 
1575 	/*
1576 	 * We have processed all we want from the data the host has sent.
1577 	 * There may still be outstanding bulk-out requests.
1578 	 */
1579 	case DATA_DIR_FROM_HOST:
1580 		if (common->residue == 0) {
1581 			/* Nothing to receive */
1582 
1583 		/* Did the host stop sending unexpectedly early? */
1584 		} else if (common->short_packet_received) {
1585 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1586 			rc = -EINTR;
1587 
1588 		/*
1589 		 * We haven't processed all the incoming data.  Even though
1590 		 * we may be allowed to stall, doing so would cause a race.
1591 		 * The controller may already have ACK'ed all the remaining
1592 		 * bulk-out packets, in which case the host wouldn't see a
1593 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
1594 		 * clear the halt -- leading to problems later on.
1595 		 */
1596 #if 0
1597 		} else if (common->can_stall) {
1598 			if (fsg_is_set(common))
1599 				fsg_set_halt(common->fsg,
1600 					     common->fsg->bulk_out);
1601 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
1602 			rc = -EINTR;
1603 #endif
1604 
1605 		/*
1606 		 * We can't stall.  Read in the excess data and throw it
1607 		 * all away.
1608 		 */
1609 		} else {
1610 			rc = throw_away_data(common);
1611 		}
1612 		break;
1613 	}
1614 	return rc;
1615 }
1616 
1617 static int send_status(struct fsg_common *common)
1618 {
1619 	struct fsg_lun		*curlun = common->curlun;
1620 	struct fsg_buffhd	*bh;
1621 	struct bulk_cs_wrap	*csw;
1622 	int			rc;
1623 	u8			status = US_BULK_STAT_OK;
1624 	u32			sd, sdinfo = 0;
1625 
1626 	/* Wait for the next buffer to become available */
1627 	bh = common->next_buffhd_to_fill;
1628 	while (bh->state != BUF_STATE_EMPTY) {
1629 		rc = sleep_thread(common, true);
1630 		if (rc)
1631 			return rc;
1632 	}
1633 
1634 	if (curlun) {
1635 		sd = curlun->sense_data;
1636 		sdinfo = curlun->sense_data_info;
1637 	} else if (common->bad_lun_okay)
1638 		sd = SS_NO_SENSE;
1639 	else
1640 		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
1641 
1642 	if (common->phase_error) {
1643 		DBG(common, "sending phase-error status\n");
1644 		status = US_BULK_STAT_PHASE;
1645 		sd = SS_INVALID_COMMAND;
1646 	} else if (sd != SS_NO_SENSE) {
1647 		DBG(common, "sending command-failure status\n");
1648 		status = US_BULK_STAT_FAIL;
1649 		VDBG(common, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
1650 				"  info x%x\n",
1651 				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
1652 	}
1653 
1654 	/* Store and send the Bulk-only CSW */
1655 	csw = (void *)bh->buf;
1656 
1657 	csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
1658 	csw->Tag = common->tag;
1659 	csw->Residue = cpu_to_le32(common->residue);
1660 	csw->Status = status;
1661 
1662 	bh->inreq->length = US_BULK_CS_WRAP_LEN;
1663 	bh->inreq->zero = 0;
1664 	if (!start_in_transfer(common, bh))
1665 		/* Don't know what to do if common->fsg is NULL */
1666 		return -EIO;
1667 
1668 	common->next_buffhd_to_fill = bh->next;
1669 	return 0;
1670 }
1671 
1672 
1673 /*-------------------------------------------------------------------------*/
1674 
1675 /*
1676  * Check whether the command is properly formed and whether its data size
1677  * and direction agree with the values we already have.
1678  */
1679 static int check_command(struct fsg_common *common, int cmnd_size,
1680 			 enum data_direction data_dir, unsigned int mask,
1681 			 int needs_medium, const char *name)
1682 {
1683 	int			i;
1684 	unsigned int		lun = common->cmnd[1] >> 5;
1685 	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
1686 	char			hdlen[20];
1687 	struct fsg_lun		*curlun;
1688 
1689 	hdlen[0] = 0;
1690 	if (common->data_dir != DATA_DIR_UNKNOWN)
1691 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
1692 			common->data_size);
1693 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
1694 	     name, cmnd_size, dirletter[(int) data_dir],
1695 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
1696 
1697 	/*
1698 	 * We can't reply at all until we know the correct data direction
1699 	 * and size.
1700 	 */
1701 	if (common->data_size_from_cmnd == 0)
1702 		data_dir = DATA_DIR_NONE;
1703 	if (common->data_size < common->data_size_from_cmnd) {
1704 		/*
1705 		 * Host data size < Device data size is a phase error.
1706 		 * Carry out the command, but only transfer as much as
1707 		 * we are allowed.
1708 		 */
1709 		common->data_size_from_cmnd = common->data_size;
1710 		common->phase_error = 1;
1711 	}
1712 	common->residue = common->data_size;
1713 	common->usb_amount_left = common->data_size;
1714 
1715 	/* Conflicting data directions is a phase error */
1716 	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
1717 		common->phase_error = 1;
1718 		return -EINVAL;
1719 	}
1720 
1721 	/* Verify the length of the command itself */
1722 	if (cmnd_size != common->cmnd_size) {
1723 
1724 		/*
1725 		 * Special case workaround: There are plenty of buggy SCSI
1726 		 * implementations. Many have issues with cbw->Length
1727 		 * field passing a wrong command size. For those cases we
1728 		 * always try to work around the problem by using the length
1729 		 * sent by the host side provided it is at least as large
1730 		 * as the correct command length.
1731 		 * Examples of such cases would be MS-Windows, which issues
1732 		 * REQUEST SENSE with cbw->Length == 12 where it should
1733 		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
1734 		 * REQUEST SENSE with cbw->Length == 10 where it should
1735 		 * be 6 as well.
1736 		 */
1737 		if (cmnd_size <= common->cmnd_size) {
1738 			DBG(common, "%s is buggy! Expected length %d "
1739 			    "but we got %d\n", name,
1740 			    cmnd_size, common->cmnd_size);
1741 			cmnd_size = common->cmnd_size;
1742 		} else {
1743 			common->phase_error = 1;
1744 			return -EINVAL;
1745 		}
1746 	}
1747 
1748 	/* Check that the LUN values are consistent */
1749 	if (common->lun != lun)
1750 		DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
1751 		    common->lun, lun);
1752 
1753 	/* Check the LUN */
1754 	curlun = common->curlun;
1755 	if (curlun) {
1756 		if (common->cmnd[0] != REQUEST_SENSE) {
1757 			curlun->sense_data = SS_NO_SENSE;
1758 			curlun->sense_data_info = 0;
1759 			curlun->info_valid = 0;
1760 		}
1761 	} else {
1762 		common->bad_lun_okay = 0;
1763 
1764 		/*
1765 		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
1766 		 * to use unsupported LUNs; all others may not.
1767 		 */
1768 		if (common->cmnd[0] != INQUIRY &&
1769 		    common->cmnd[0] != REQUEST_SENSE) {
1770 			DBG(common, "unsupported LUN %u\n", common->lun);
1771 			return -EINVAL;
1772 		}
1773 	}
1774 
1775 	/*
1776 	 * If a unit attention condition exists, only INQUIRY and
1777 	 * REQUEST SENSE commands are allowed; anything else must fail.
1778 	 */
1779 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
1780 	    common->cmnd[0] != INQUIRY &&
1781 	    common->cmnd[0] != REQUEST_SENSE) {
1782 		curlun->sense_data = curlun->unit_attention_data;
1783 		curlun->unit_attention_data = SS_NO_SENSE;
1784 		return -EINVAL;
1785 	}
1786 
1787 	/* Check that only command bytes listed in the mask are non-zero */
1788 	common->cmnd[1] &= 0x1f;			/* Mask away the LUN */
1789 	for (i = 1; i < cmnd_size; ++i) {
1790 		if (common->cmnd[i] && !(mask & (1 << i))) {
1791 			if (curlun)
1792 				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
1793 			return -EINVAL;
1794 		}
1795 	}
1796 
1797 	/* If the medium isn't mounted and the command needs to access
1798 	 * it, return an error. */
1799 	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
1800 		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
1801 		return -EINVAL;
1802 	}
1803 
1804 	return 0;
1805 }
1806 
1807 /* wrapper of check_command for data size in blocks handling */
1808 static int check_command_size_in_blocks(struct fsg_common *common,
1809 		int cmnd_size, enum data_direction data_dir,
1810 		unsigned int mask, int needs_medium, const char *name)
1811 {
1812 	if (common->curlun)
1813 		common->data_size_from_cmnd <<= common->curlun->blkbits;
1814 	return check_command(common, cmnd_size, data_dir,
1815 			mask, needs_medium, name);
1816 }
1817 
1818 static int do_scsi_command(struct fsg_common *common)
1819 {
1820 	struct fsg_buffhd	*bh;
1821 	int			rc;
1822 	int			reply = -EINVAL;
1823 	int			i;
1824 	static char		unknown[16];
1825 
1826 	dump_cdb(common);
1827 
1828 	/* Wait for the next buffer to become available for data or status */
1829 	bh = common->next_buffhd_to_fill;
1830 	common->next_buffhd_to_drain = bh;
1831 	while (bh->state != BUF_STATE_EMPTY) {
1832 		rc = sleep_thread(common, true);
1833 		if (rc)
1834 			return rc;
1835 	}
1836 	common->phase_error = 0;
1837 	common->short_packet_received = 0;
1838 
1839 	down_read(&common->filesem);	/* We're using the backing file */
1840 	switch (common->cmnd[0]) {
1841 
1842 	case INQUIRY:
1843 		common->data_size_from_cmnd = common->cmnd[4];
1844 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1845 				      (1<<4), 0,
1846 				      "INQUIRY");
1847 		if (reply == 0)
1848 			reply = do_inquiry(common, bh);
1849 		break;
1850 
1851 	case MODE_SELECT:
1852 		common->data_size_from_cmnd = common->cmnd[4];
1853 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
1854 				      (1<<1) | (1<<4), 0,
1855 				      "MODE SELECT(6)");
1856 		if (reply == 0)
1857 			reply = do_mode_select(common, bh);
1858 		break;
1859 
1860 	case MODE_SELECT_10:
1861 		common->data_size_from_cmnd =
1862 			get_unaligned_be16(&common->cmnd[7]);
1863 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
1864 				      (1<<1) | (3<<7), 0,
1865 				      "MODE SELECT(10)");
1866 		if (reply == 0)
1867 			reply = do_mode_select(common, bh);
1868 		break;
1869 
1870 	case MODE_SENSE:
1871 		common->data_size_from_cmnd = common->cmnd[4];
1872 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1873 				      (1<<1) | (1<<2) | (1<<4), 0,
1874 				      "MODE SENSE(6)");
1875 		if (reply == 0)
1876 			reply = do_mode_sense(common, bh);
1877 		break;
1878 
1879 	case MODE_SENSE_10:
1880 		common->data_size_from_cmnd =
1881 			get_unaligned_be16(&common->cmnd[7]);
1882 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1883 				      (1<<1) | (1<<2) | (3<<7), 0,
1884 				      "MODE SENSE(10)");
1885 		if (reply == 0)
1886 			reply = do_mode_sense(common, bh);
1887 		break;
1888 
1889 	case ALLOW_MEDIUM_REMOVAL:
1890 		common->data_size_from_cmnd = 0;
1891 		reply = check_command(common, 6, DATA_DIR_NONE,
1892 				      (1<<4), 0,
1893 				      "PREVENT-ALLOW MEDIUM REMOVAL");
1894 		if (reply == 0)
1895 			reply = do_prevent_allow(common);
1896 		break;
1897 
1898 	case READ_6:
1899 		i = common->cmnd[4];
1900 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
1901 		reply = check_command_size_in_blocks(common, 6,
1902 				      DATA_DIR_TO_HOST,
1903 				      (7<<1) | (1<<4), 1,
1904 				      "READ(6)");
1905 		if (reply == 0)
1906 			reply = do_read(common);
1907 		break;
1908 
1909 	case READ_10:
1910 		common->data_size_from_cmnd =
1911 				get_unaligned_be16(&common->cmnd[7]);
1912 		reply = check_command_size_in_blocks(common, 10,
1913 				      DATA_DIR_TO_HOST,
1914 				      (1<<1) | (0xf<<2) | (3<<7), 1,
1915 				      "READ(10)");
1916 		if (reply == 0)
1917 			reply = do_read(common);
1918 		break;
1919 
1920 	case READ_12:
1921 		common->data_size_from_cmnd =
1922 				get_unaligned_be32(&common->cmnd[6]);
1923 		reply = check_command_size_in_blocks(common, 12,
1924 				      DATA_DIR_TO_HOST,
1925 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
1926 				      "READ(12)");
1927 		if (reply == 0)
1928 			reply = do_read(common);
1929 		break;
1930 
1931 	case READ_CAPACITY:
1932 		common->data_size_from_cmnd = 8;
1933 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1934 				      (0xf<<2) | (1<<8), 1,
1935 				      "READ CAPACITY");
1936 		if (reply == 0)
1937 			reply = do_read_capacity(common, bh);
1938 		break;
1939 
1940 	case READ_HEADER:
1941 		if (!common->curlun || !common->curlun->cdrom)
1942 			goto unknown_cmnd;
1943 		common->data_size_from_cmnd =
1944 			get_unaligned_be16(&common->cmnd[7]);
1945 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1946 				      (3<<7) | (0x1f<<1), 1,
1947 				      "READ HEADER");
1948 		if (reply == 0)
1949 			reply = do_read_header(common, bh);
1950 		break;
1951 
1952 	case READ_TOC:
1953 		if (!common->curlun || !common->curlun->cdrom)
1954 			goto unknown_cmnd;
1955 		common->data_size_from_cmnd =
1956 			get_unaligned_be16(&common->cmnd[7]);
1957 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1958 				      (7<<6) | (1<<1), 1,
1959 				      "READ TOC");
1960 		if (reply == 0)
1961 			reply = do_read_toc(common, bh);
1962 		break;
1963 
1964 	case READ_FORMAT_CAPACITIES:
1965 		common->data_size_from_cmnd =
1966 			get_unaligned_be16(&common->cmnd[7]);
1967 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
1968 				      (3<<7), 1,
1969 				      "READ FORMAT CAPACITIES");
1970 		if (reply == 0)
1971 			reply = do_read_format_capacities(common, bh);
1972 		break;
1973 
1974 	case REQUEST_SENSE:
1975 		common->data_size_from_cmnd = common->cmnd[4];
1976 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
1977 				      (1<<4), 0,
1978 				      "REQUEST SENSE");
1979 		if (reply == 0)
1980 			reply = do_request_sense(common, bh);
1981 		break;
1982 
1983 	case START_STOP:
1984 		common->data_size_from_cmnd = 0;
1985 		reply = check_command(common, 6, DATA_DIR_NONE,
1986 				      (1<<1) | (1<<4), 0,
1987 				      "START-STOP UNIT");
1988 		if (reply == 0)
1989 			reply = do_start_stop(common);
1990 		break;
1991 
1992 	case SYNCHRONIZE_CACHE:
1993 		common->data_size_from_cmnd = 0;
1994 		reply = check_command(common, 10, DATA_DIR_NONE,
1995 				      (0xf<<2) | (3<<7), 1,
1996 				      "SYNCHRONIZE CACHE");
1997 		if (reply == 0)
1998 			reply = do_synchronize_cache(common);
1999 		break;
2000 
2001 	case TEST_UNIT_READY:
2002 		common->data_size_from_cmnd = 0;
2003 		reply = check_command(common, 6, DATA_DIR_NONE,
2004 				0, 1,
2005 				"TEST UNIT READY");
2006 		break;
2007 
2008 	/*
2009 	 * Although optional, this command is used by MS-Windows.  We
2010 	 * support a minimal version: BytChk must be 0.
2011 	 */
2012 	case VERIFY:
2013 		common->data_size_from_cmnd = 0;
2014 		reply = check_command(common, 10, DATA_DIR_NONE,
2015 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2016 				      "VERIFY");
2017 		if (reply == 0)
2018 			reply = do_verify(common);
2019 		break;
2020 
2021 	case WRITE_6:
2022 		i = common->cmnd[4];
2023 		common->data_size_from_cmnd = (i == 0) ? 256 : i;
2024 		reply = check_command_size_in_blocks(common, 6,
2025 				      DATA_DIR_FROM_HOST,
2026 				      (7<<1) | (1<<4), 1,
2027 				      "WRITE(6)");
2028 		if (reply == 0)
2029 			reply = do_write(common);
2030 		break;
2031 
2032 	case WRITE_10:
2033 		common->data_size_from_cmnd =
2034 				get_unaligned_be16(&common->cmnd[7]);
2035 		reply = check_command_size_in_blocks(common, 10,
2036 				      DATA_DIR_FROM_HOST,
2037 				      (1<<1) | (0xf<<2) | (3<<7), 1,
2038 				      "WRITE(10)");
2039 		if (reply == 0)
2040 			reply = do_write(common);
2041 		break;
2042 
2043 	case WRITE_12:
2044 		common->data_size_from_cmnd =
2045 				get_unaligned_be32(&common->cmnd[6]);
2046 		reply = check_command_size_in_blocks(common, 12,
2047 				      DATA_DIR_FROM_HOST,
2048 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
2049 				      "WRITE(12)");
2050 		if (reply == 0)
2051 			reply = do_write(common);
2052 		break;
2053 
2054 	/*
2055 	 * Some mandatory commands that we recognize but don't implement.
2056 	 * They don't mean much in this setting.  It's left as an exercise
2057 	 * for anyone interested to implement RESERVE and RELEASE in terms
2058 	 * of Posix locks.
2059 	 */
2060 	case FORMAT_UNIT:
2061 	case RELEASE:
2062 	case RESERVE:
2063 	case SEND_DIAGNOSTIC:
2064 		/* Fall through */
2065 
2066 	default:
2067 unknown_cmnd:
2068 		common->data_size_from_cmnd = 0;
2069 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
2070 		reply = check_command(common, common->cmnd_size,
2071 				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
2072 		if (reply == 0) {
2073 			common->curlun->sense_data = SS_INVALID_COMMAND;
2074 			reply = -EINVAL;
2075 		}
2076 		break;
2077 	}
2078 	up_read(&common->filesem);
2079 
2080 	if (reply == -EINTR || signal_pending(current))
2081 		return -EINTR;
2082 
2083 	/* Set up the single reply buffer for finish_reply() */
2084 	if (reply == -EINVAL)
2085 		reply = 0;		/* Error reply length */
2086 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
2087 		reply = min((u32)reply, common->data_size_from_cmnd);
2088 		bh->inreq->length = reply;
2089 		bh->state = BUF_STATE_FULL;
2090 		common->residue -= reply;
2091 	}				/* Otherwise it's already set */
2092 
2093 	return 0;
2094 }
2095 
2096 
2097 /*-------------------------------------------------------------------------*/
2098 
2099 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
2100 {
2101 	struct usb_request	*req = bh->outreq;
2102 	struct bulk_cb_wrap	*cbw = req->buf;
2103 	struct fsg_common	*common = fsg->common;
2104 
2105 	/* Was this a real packet?  Should it be ignored? */
2106 	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
2107 		return -EINVAL;
2108 
2109 	/* Is the CBW valid? */
2110 	if (req->actual != US_BULK_CB_WRAP_LEN ||
2111 			cbw->Signature != cpu_to_le32(
2112 				US_BULK_CB_SIGN)) {
2113 		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
2114 				req->actual,
2115 				le32_to_cpu(cbw->Signature));
2116 
2117 		/*
2118 		 * The Bulk-only spec says we MUST stall the IN endpoint
2119 		 * (6.6.1), so it's unavoidable.  It also says we must
2120 		 * retain this state until the next reset, but there's
2121 		 * no way to tell the controller driver it should ignore
2122 		 * Clear-Feature(HALT) requests.
2123 		 *
2124 		 * We aren't required to halt the OUT endpoint; instead
2125 		 * we can simply accept and discard any data received
2126 		 * until the next reset.
2127 		 */
2128 		wedge_bulk_in_endpoint(fsg);
2129 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2130 		return -EINVAL;
2131 	}
2132 
2133 	/* Is the CBW meaningful? */
2134 	if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
2135 			cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
2136 		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
2137 				"cmdlen %u\n",
2138 				cbw->Lun, cbw->Flags, cbw->Length);
2139 
2140 		/*
2141 		 * We can do anything we want here, so let's stall the
2142 		 * bulk pipes if we are allowed to.
2143 		 */
2144 		if (common->can_stall) {
2145 			fsg_set_halt(fsg, fsg->bulk_out);
2146 			halt_bulk_in_endpoint(fsg);
2147 		}
2148 		return -EINVAL;
2149 	}
2150 
2151 	/* Save the command for later */
2152 	common->cmnd_size = cbw->Length;
2153 	memcpy(common->cmnd, cbw->CDB, common->cmnd_size);
2154 	if (cbw->Flags & US_BULK_FLAG_IN)
2155 		common->data_dir = DATA_DIR_TO_HOST;
2156 	else
2157 		common->data_dir = DATA_DIR_FROM_HOST;
2158 	common->data_size = le32_to_cpu(cbw->DataTransferLength);
2159 	if (common->data_size == 0)
2160 		common->data_dir = DATA_DIR_NONE;
2161 	common->lun = cbw->Lun;
2162 	if (common->lun < common->nluns)
2163 		common->curlun = common->luns[common->lun];
2164 	else
2165 		common->curlun = NULL;
2166 	common->tag = cbw->Tag;
2167 	return 0;
2168 }
2169 
2170 static int get_next_command(struct fsg_common *common)
2171 {
2172 	struct fsg_buffhd	*bh;
2173 	int			rc = 0;
2174 
2175 	/* Wait for the next buffer to become available */
2176 	bh = common->next_buffhd_to_fill;
2177 	while (bh->state != BUF_STATE_EMPTY) {
2178 		rc = sleep_thread(common, true);
2179 		if (rc)
2180 			return rc;
2181 	}
2182 
2183 	/* Queue a request to read a Bulk-only CBW */
2184 	set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN);
2185 	if (!start_out_transfer(common, bh))
2186 		/* Don't know what to do if common->fsg is NULL */
2187 		return -EIO;
2188 
2189 	/*
2190 	 * We will drain the buffer in software, which means we
2191 	 * can reuse it for the next filling.  No need to advance
2192 	 * next_buffhd_to_fill.
2193 	 */
2194 
2195 	/* Wait for the CBW to arrive */
2196 	while (bh->state != BUF_STATE_FULL) {
2197 		rc = sleep_thread(common, true);
2198 		if (rc)
2199 			return rc;
2200 	}
2201 	smp_rmb();
2202 	rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO;
2203 	bh->state = BUF_STATE_EMPTY;
2204 
2205 	return rc;
2206 }
2207 
2208 
2209 /*-------------------------------------------------------------------------*/
2210 
2211 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
2212 		struct usb_request **preq)
2213 {
2214 	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
2215 	if (*preq)
2216 		return 0;
2217 	ERROR(common, "can't allocate request for %s\n", ep->name);
2218 	return -ENOMEM;
2219 }
2220 
2221 /* Reset interface setting and re-init endpoint state (toggle etc). */
2222 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
2223 {
2224 	struct fsg_dev *fsg;
2225 	int i, rc = 0;
2226 
2227 	if (common->running)
2228 		DBG(common, "reset interface\n");
2229 
2230 reset:
2231 	/* Deallocate the requests */
2232 	if (common->fsg) {
2233 		fsg = common->fsg;
2234 
2235 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2236 			struct fsg_buffhd *bh = &common->buffhds[i];
2237 
2238 			if (bh->inreq) {
2239 				usb_ep_free_request(fsg->bulk_in, bh->inreq);
2240 				bh->inreq = NULL;
2241 			}
2242 			if (bh->outreq) {
2243 				usb_ep_free_request(fsg->bulk_out, bh->outreq);
2244 				bh->outreq = NULL;
2245 			}
2246 		}
2247 
2248 		/* Disable the endpoints */
2249 		if (fsg->bulk_in_enabled) {
2250 			usb_ep_disable(fsg->bulk_in);
2251 			fsg->bulk_in->driver_data = NULL;
2252 			fsg->bulk_in_enabled = 0;
2253 		}
2254 		if (fsg->bulk_out_enabled) {
2255 			usb_ep_disable(fsg->bulk_out);
2256 			fsg->bulk_out->driver_data = NULL;
2257 			fsg->bulk_out_enabled = 0;
2258 		}
2259 
2260 		common->fsg = NULL;
2261 		wake_up(&common->fsg_wait);
2262 	}
2263 
2264 	common->running = 0;
2265 	if (!new_fsg || rc)
2266 		return rc;
2267 
2268 	common->fsg = new_fsg;
2269 	fsg = common->fsg;
2270 
2271 	/* Enable the endpoints */
2272 	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
2273 	if (rc)
2274 		goto reset;
2275 	rc = usb_ep_enable(fsg->bulk_in);
2276 	if (rc)
2277 		goto reset;
2278 	fsg->bulk_in->driver_data = common;
2279 	fsg->bulk_in_enabled = 1;
2280 
2281 	rc = config_ep_by_speed(common->gadget, &(fsg->function),
2282 				fsg->bulk_out);
2283 	if (rc)
2284 		goto reset;
2285 	rc = usb_ep_enable(fsg->bulk_out);
2286 	if (rc)
2287 		goto reset;
2288 	fsg->bulk_out->driver_data = common;
2289 	fsg->bulk_out_enabled = 1;
2290 	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
2291 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
2292 
2293 	/* Allocate the requests */
2294 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2295 		struct fsg_buffhd	*bh = &common->buffhds[i];
2296 
2297 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
2298 		if (rc)
2299 			goto reset;
2300 		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
2301 		if (rc)
2302 			goto reset;
2303 		bh->inreq->buf = bh->outreq->buf = bh->buf;
2304 		bh->inreq->context = bh->outreq->context = bh;
2305 		bh->inreq->complete = bulk_in_complete;
2306 		bh->outreq->complete = bulk_out_complete;
2307 	}
2308 
2309 	common->running = 1;
2310 	for (i = 0; i < common->nluns; ++i)
2311 		if (common->luns[i])
2312 			common->luns[i]->unit_attention_data =
2313 				SS_RESET_OCCURRED;
2314 	return rc;
2315 }
2316 
2317 
2318 /****************************** ALT CONFIGS ******************************/
2319 
2320 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
2321 {
2322 	struct fsg_dev *fsg = fsg_from_func(f);
2323 	fsg->common->new_fsg = fsg;
2324 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2325 	return USB_GADGET_DELAYED_STATUS;
2326 }
2327 
2328 static void fsg_disable(struct usb_function *f)
2329 {
2330 	struct fsg_dev *fsg = fsg_from_func(f);
2331 	fsg->common->new_fsg = NULL;
2332 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
2333 }
2334 
2335 
2336 /*-------------------------------------------------------------------------*/
2337 
2338 static void handle_exception(struct fsg_common *common)
2339 {
2340 	siginfo_t		info;
2341 	int			i;
2342 	struct fsg_buffhd	*bh;
2343 	enum fsg_state		old_state;
2344 	struct fsg_lun		*curlun;
2345 	unsigned int		exception_req_tag;
2346 
2347 	/*
2348 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
2349 	 * into a high-priority EXIT exception.
2350 	 */
2351 	for (;;) {
2352 		int sig =
2353 			dequeue_signal_lock(current, &current->blocked, &info);
2354 		if (!sig)
2355 			break;
2356 		if (sig != SIGUSR1) {
2357 			if (common->state < FSG_STATE_EXIT)
2358 				DBG(common, "Main thread exiting on signal\n");
2359 			raise_exception(common, FSG_STATE_EXIT);
2360 		}
2361 	}
2362 
2363 	/* Cancel all the pending transfers */
2364 	if (likely(common->fsg)) {
2365 		for (i = 0; i < common->fsg_num_buffers; ++i) {
2366 			bh = &common->buffhds[i];
2367 			if (bh->inreq_busy)
2368 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
2369 			if (bh->outreq_busy)
2370 				usb_ep_dequeue(common->fsg->bulk_out,
2371 					       bh->outreq);
2372 		}
2373 
2374 		/* Wait until everything is idle */
2375 		for (;;) {
2376 			int num_active = 0;
2377 			for (i = 0; i < common->fsg_num_buffers; ++i) {
2378 				bh = &common->buffhds[i];
2379 				num_active += bh->inreq_busy + bh->outreq_busy;
2380 			}
2381 			if (num_active == 0)
2382 				break;
2383 			if (sleep_thread(common, true))
2384 				return;
2385 		}
2386 
2387 		/* Clear out the controller's fifos */
2388 		if (common->fsg->bulk_in_enabled)
2389 			usb_ep_fifo_flush(common->fsg->bulk_in);
2390 		if (common->fsg->bulk_out_enabled)
2391 			usb_ep_fifo_flush(common->fsg->bulk_out);
2392 	}
2393 
2394 	/*
2395 	 * Reset the I/O buffer states and pointers, the SCSI
2396 	 * state, and the exception.  Then invoke the handler.
2397 	 */
2398 	spin_lock_irq(&common->lock);
2399 
2400 	for (i = 0; i < common->fsg_num_buffers; ++i) {
2401 		bh = &common->buffhds[i];
2402 		bh->state = BUF_STATE_EMPTY;
2403 	}
2404 	common->next_buffhd_to_fill = &common->buffhds[0];
2405 	common->next_buffhd_to_drain = &common->buffhds[0];
2406 	exception_req_tag = common->exception_req_tag;
2407 	old_state = common->state;
2408 
2409 	if (old_state == FSG_STATE_ABORT_BULK_OUT)
2410 		common->state = FSG_STATE_STATUS_PHASE;
2411 	else {
2412 		for (i = 0; i < common->nluns; ++i) {
2413 			curlun = common->luns[i];
2414 			if (!curlun)
2415 				continue;
2416 			curlun->prevent_medium_removal = 0;
2417 			curlun->sense_data = SS_NO_SENSE;
2418 			curlun->unit_attention_data = SS_NO_SENSE;
2419 			curlun->sense_data_info = 0;
2420 			curlun->info_valid = 0;
2421 		}
2422 		common->state = FSG_STATE_IDLE;
2423 	}
2424 	spin_unlock_irq(&common->lock);
2425 
2426 	/* Carry out any extra actions required for the exception */
2427 	switch (old_state) {
2428 	case FSG_STATE_ABORT_BULK_OUT:
2429 		send_status(common);
2430 		spin_lock_irq(&common->lock);
2431 		if (common->state == FSG_STATE_STATUS_PHASE)
2432 			common->state = FSG_STATE_IDLE;
2433 		spin_unlock_irq(&common->lock);
2434 		break;
2435 
2436 	case FSG_STATE_RESET:
2437 		/*
2438 		 * In case we were forced against our will to halt a
2439 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
2440 		 * requires this.)
2441 		 */
2442 		if (!fsg_is_set(common))
2443 			break;
2444 		if (test_and_clear_bit(IGNORE_BULK_OUT,
2445 				       &common->fsg->atomic_bitflags))
2446 			usb_ep_clear_halt(common->fsg->bulk_in);
2447 
2448 		if (common->ep0_req_tag == exception_req_tag)
2449 			ep0_queue(common);	/* Complete the status stage */
2450 
2451 		/*
2452 		 * Technically this should go here, but it would only be
2453 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
2454 		 * CONFIG_CHANGE cases.
2455 		 */
2456 		/* for (i = 0; i < common->nluns; ++i) */
2457 		/*	if (common->luns[i]) */
2458 		/*		common->luns[i]->unit_attention_data = */
2459 		/*			SS_RESET_OCCURRED;  */
2460 		break;
2461 
2462 	case FSG_STATE_CONFIG_CHANGE:
2463 		do_set_interface(common, common->new_fsg);
2464 		if (common->new_fsg)
2465 			usb_composite_setup_continue(common->cdev);
2466 		break;
2467 
2468 	case FSG_STATE_EXIT:
2469 	case FSG_STATE_TERMINATED:
2470 		do_set_interface(common, NULL);		/* Free resources */
2471 		spin_lock_irq(&common->lock);
2472 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
2473 		spin_unlock_irq(&common->lock);
2474 		break;
2475 
2476 	case FSG_STATE_INTERFACE_CHANGE:
2477 	case FSG_STATE_DISCONNECT:
2478 	case FSG_STATE_COMMAND_PHASE:
2479 	case FSG_STATE_DATA_PHASE:
2480 	case FSG_STATE_STATUS_PHASE:
2481 	case FSG_STATE_IDLE:
2482 		break;
2483 	}
2484 }
2485 
2486 
2487 /*-------------------------------------------------------------------------*/
2488 
2489 static int fsg_main_thread(void *common_)
2490 {
2491 	struct fsg_common	*common = common_;
2492 
2493 	/*
2494 	 * Allow the thread to be killed by a signal, but set the signal mask
2495 	 * to block everything but INT, TERM, KILL, and USR1.
2496 	 */
2497 	allow_signal(SIGINT);
2498 	allow_signal(SIGTERM);
2499 	allow_signal(SIGKILL);
2500 	allow_signal(SIGUSR1);
2501 
2502 	/* Allow the thread to be frozen */
2503 	set_freezable();
2504 
2505 	/*
2506 	 * Arrange for userspace references to be interpreted as kernel
2507 	 * pointers.  That way we can pass a kernel pointer to a routine
2508 	 * that expects a __user pointer and it will work okay.
2509 	 */
2510 	set_fs(get_ds());
2511 
2512 	/* The main loop */
2513 	while (common->state != FSG_STATE_TERMINATED) {
2514 		if (exception_in_progress(common) || signal_pending(current)) {
2515 			handle_exception(common);
2516 			continue;
2517 		}
2518 
2519 		if (!common->running) {
2520 			sleep_thread(common, true);
2521 			continue;
2522 		}
2523 
2524 		if (get_next_command(common))
2525 			continue;
2526 
2527 		spin_lock_irq(&common->lock);
2528 		if (!exception_in_progress(common))
2529 			common->state = FSG_STATE_DATA_PHASE;
2530 		spin_unlock_irq(&common->lock);
2531 
2532 		if (do_scsi_command(common) || finish_reply(common))
2533 			continue;
2534 
2535 		spin_lock_irq(&common->lock);
2536 		if (!exception_in_progress(common))
2537 			common->state = FSG_STATE_STATUS_PHASE;
2538 		spin_unlock_irq(&common->lock);
2539 
2540 		if (send_status(common))
2541 			continue;
2542 
2543 		spin_lock_irq(&common->lock);
2544 		if (!exception_in_progress(common))
2545 			common->state = FSG_STATE_IDLE;
2546 		spin_unlock_irq(&common->lock);
2547 	}
2548 
2549 	spin_lock_irq(&common->lock);
2550 	common->thread_task = NULL;
2551 	spin_unlock_irq(&common->lock);
2552 
2553 	if (!common->ops || !common->ops->thread_exits
2554 	 || common->ops->thread_exits(common) < 0) {
2555 		struct fsg_lun **curlun_it = common->luns;
2556 		unsigned i = common->nluns;
2557 
2558 		down_write(&common->filesem);
2559 		for (; i--; ++curlun_it) {
2560 			struct fsg_lun *curlun = *curlun_it;
2561 			if (!curlun || !fsg_lun_is_open(curlun))
2562 				continue;
2563 
2564 			fsg_lun_close(curlun);
2565 			curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
2566 		}
2567 		up_write(&common->filesem);
2568 	}
2569 
2570 	/* Let fsg_unbind() know the thread has exited */
2571 	complete_and_exit(&common->thread_notifier, 0);
2572 }
2573 
2574 
2575 /*************************** DEVICE ATTRIBUTES ***************************/
2576 
2577 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf)
2578 {
2579 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2580 
2581 	return fsg_show_ro(curlun, buf);
2582 }
2583 
2584 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
2585 			  char *buf)
2586 {
2587 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2588 
2589 	return fsg_show_nofua(curlun, buf);
2590 }
2591 
2592 static ssize_t file_show(struct device *dev, struct device_attribute *attr,
2593 			 char *buf)
2594 {
2595 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2596 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2597 
2598 	return fsg_show_file(curlun, filesem, buf);
2599 }
2600 
2601 static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
2602 			const char *buf, size_t count)
2603 {
2604 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2605 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2606 
2607 	return fsg_store_ro(curlun, filesem, buf, count);
2608 }
2609 
2610 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
2611 			   const char *buf, size_t count)
2612 {
2613 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2614 
2615 	return fsg_store_nofua(curlun, buf, count);
2616 }
2617 
2618 static ssize_t file_store(struct device *dev, struct device_attribute *attr,
2619 			  const char *buf, size_t count)
2620 {
2621 	struct fsg_lun		*curlun = fsg_lun_from_dev(dev);
2622 	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
2623 
2624 	return fsg_store_file(curlun, filesem, buf, count);
2625 }
2626 
2627 static DEVICE_ATTR_RW(ro);
2628 static DEVICE_ATTR_RW(nofua);
2629 static DEVICE_ATTR_RW(file);
2630 
2631 static struct device_attribute dev_attr_ro_cdrom = __ATTR_RO(ro);
2632 static struct device_attribute dev_attr_file_nonremovable = __ATTR_RO(file);
2633 
2634 
2635 /****************************** FSG COMMON ******************************/
2636 
2637 static void fsg_common_release(struct kref *ref);
2638 
2639 static void fsg_lun_release(struct device *dev)
2640 {
2641 	/* Nothing needs to be done */
2642 }
2643 
2644 void fsg_common_get(struct fsg_common *common)
2645 {
2646 	kref_get(&common->ref);
2647 }
2648 EXPORT_SYMBOL_GPL(fsg_common_get);
2649 
2650 void fsg_common_put(struct fsg_common *common)
2651 {
2652 	kref_put(&common->ref, fsg_common_release);
2653 }
2654 EXPORT_SYMBOL_GPL(fsg_common_put);
2655 
2656 /* check if fsg_num_buffers is within a valid range */
2657 static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers)
2658 {
2659 	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
2660 		return 0;
2661 	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
2662 	       fsg_num_buffers, 2, 4);
2663 	return -EINVAL;
2664 }
2665 
2666 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
2667 {
2668 	if (!common) {
2669 		common = kzalloc(sizeof(*common), GFP_KERNEL);
2670 		if (!common)
2671 			return ERR_PTR(-ENOMEM);
2672 		common->free_storage_on_release = 1;
2673 	} else {
2674 		common->free_storage_on_release = 0;
2675 	}
2676 	init_rwsem(&common->filesem);
2677 	spin_lock_init(&common->lock);
2678 	kref_init(&common->ref);
2679 	init_completion(&common->thread_notifier);
2680 	init_waitqueue_head(&common->fsg_wait);
2681 	common->state = FSG_STATE_TERMINATED;
2682 
2683 	return common;
2684 }
2685 
2686 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs)
2687 {
2688 	common->sysfs = sysfs;
2689 }
2690 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs);
2691 
2692 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
2693 {
2694 	if (buffhds) {
2695 		struct fsg_buffhd *bh = buffhds;
2696 		while (n--) {
2697 			kfree(bh->buf);
2698 			++bh;
2699 		}
2700 		kfree(buffhds);
2701 	}
2702 }
2703 
2704 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
2705 {
2706 	struct fsg_buffhd *bh, *buffhds;
2707 	int i, rc;
2708 
2709 	rc = fsg_num_buffers_validate(n);
2710 	if (rc != 0)
2711 		return rc;
2712 
2713 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
2714 	if (!buffhds)
2715 		return -ENOMEM;
2716 
2717 	/* Data buffers cyclic list */
2718 	bh = buffhds;
2719 	i = n;
2720 	goto buffhds_first_it;
2721 	do {
2722 		bh->next = bh + 1;
2723 		++bh;
2724 buffhds_first_it:
2725 		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
2726 		if (unlikely(!bh->buf))
2727 			goto error_release;
2728 	} while (--i);
2729 	bh->next = buffhds;
2730 
2731 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2732 	common->fsg_num_buffers = n;
2733 	common->buffhds = buffhds;
2734 
2735 	return 0;
2736 
2737 error_release:
2738 	/*
2739 	 * "buf"s pointed to by heads after n - i are NULL
2740 	 * so releasing them won't hurt
2741 	 */
2742 	_fsg_common_free_buffers(buffhds, n);
2743 
2744 	return -ENOMEM;
2745 }
2746 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
2747 
2748 static inline void fsg_common_remove_sysfs(struct fsg_lun *lun)
2749 {
2750 	device_remove_file(&lun->dev, &dev_attr_nofua);
2751 	/*
2752 	 * device_remove_file() =>
2753 	 *
2754 	 * here the attr (e.g. dev_attr_ro) is only used to be passed to:
2755 	 *
2756 	 *	sysfs_remove_file() =>
2757 	 *
2758 	 *	here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in
2759 	 *	the same namespace and
2760 	 *	from here only attr->name is passed to:
2761 	 *
2762 	 *		sysfs_hash_and_remove()
2763 	 *
2764 	 *		attr->name is the same for dev_attr_ro_cdrom and
2765 	 *		dev_attr_ro
2766 	 *		attr->name is the same for dev_attr_file and
2767 	 *		dev_attr_file_nonremovable
2768 	 *
2769 	 * so we don't differentiate between removing e.g. dev_attr_ro_cdrom
2770 	 * and dev_attr_ro
2771 	 */
2772 	device_remove_file(&lun->dev, &dev_attr_ro);
2773 	device_remove_file(&lun->dev, &dev_attr_file);
2774 }
2775 
2776 void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs)
2777 {
2778 	if (sysfs) {
2779 		fsg_common_remove_sysfs(lun);
2780 		device_unregister(&lun->dev);
2781 	}
2782 	fsg_lun_close(lun);
2783 	kfree(lun);
2784 }
2785 EXPORT_SYMBOL_GPL(fsg_common_remove_lun);
2786 
2787 static void _fsg_common_remove_luns(struct fsg_common *common, int n)
2788 {
2789 	int i;
2790 
2791 	for (i = 0; i < n; ++i)
2792 		if (common->luns[i]) {
2793 			fsg_common_remove_lun(common->luns[i], common->sysfs);
2794 			common->luns[i] = NULL;
2795 		}
2796 }
2797 EXPORT_SYMBOL_GPL(fsg_common_remove_luns);
2798 
2799 void fsg_common_remove_luns(struct fsg_common *common)
2800 {
2801 	_fsg_common_remove_luns(common, common->nluns);
2802 }
2803 
2804 void fsg_common_free_luns(struct fsg_common *common)
2805 {
2806 	fsg_common_remove_luns(common);
2807 	kfree(common->luns);
2808 	common->luns = NULL;
2809 }
2810 EXPORT_SYMBOL_GPL(fsg_common_free_luns);
2811 
2812 int fsg_common_set_nluns(struct fsg_common *common, int nluns)
2813 {
2814 	struct fsg_lun **curlun;
2815 
2816 	/* Find out how many LUNs there should be */
2817 	if (nluns < 1 || nluns > FSG_MAX_LUNS) {
2818 		pr_err("invalid number of LUNs: %u\n", nluns);
2819 		return -EINVAL;
2820 	}
2821 
2822 	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
2823 	if (unlikely(!curlun))
2824 		return -ENOMEM;
2825 
2826 	if (common->luns)
2827 		fsg_common_free_luns(common);
2828 
2829 	common->luns = curlun;
2830 	common->nluns = nluns;
2831 
2832 	pr_info("Number of LUNs=%d\n", common->nluns);
2833 
2834 	return 0;
2835 }
2836 EXPORT_SYMBOL_GPL(fsg_common_set_nluns);
2837 
2838 void fsg_common_set_ops(struct fsg_common *common,
2839 			const struct fsg_operations *ops)
2840 {
2841 	common->ops = ops;
2842 }
2843 EXPORT_SYMBOL_GPL(fsg_common_set_ops);
2844 
2845 void fsg_common_free_buffers(struct fsg_common *common)
2846 {
2847 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
2848 	common->buffhds = NULL;
2849 }
2850 EXPORT_SYMBOL_GPL(fsg_common_free_buffers);
2851 
2852 int fsg_common_set_cdev(struct fsg_common *common,
2853 			 struct usb_composite_dev *cdev, bool can_stall)
2854 {
2855 	struct usb_string *us;
2856 
2857 	common->gadget = cdev->gadget;
2858 	common->ep0 = cdev->gadget->ep0;
2859 	common->ep0req = cdev->req;
2860 	common->cdev = cdev;
2861 
2862 	us = usb_gstrings_attach(cdev, fsg_strings_array,
2863 				 ARRAY_SIZE(fsg_strings));
2864 	if (IS_ERR(us))
2865 		return PTR_ERR(us);
2866 
2867 	fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id;
2868 
2869 	/*
2870 	 * Some peripheral controllers are known not to be able to
2871 	 * halt bulk endpoints correctly.  If one of them is present,
2872 	 * disable stalls.
2873 	 */
2874 	common->can_stall = can_stall && !(gadget_is_at91(common->gadget));
2875 
2876 	return 0;
2877 }
2878 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
2879 
2880 static inline int fsg_common_add_sysfs(struct fsg_common *common,
2881 				       struct fsg_lun *lun)
2882 {
2883 	int rc;
2884 
2885 	rc = device_register(&lun->dev);
2886 	if (rc) {
2887 		put_device(&lun->dev);
2888 		return rc;
2889 	}
2890 
2891 	rc = device_create_file(&lun->dev,
2892 				lun->cdrom
2893 			      ? &dev_attr_ro_cdrom
2894 			      : &dev_attr_ro);
2895 	if (rc)
2896 		goto error;
2897 	rc = device_create_file(&lun->dev,
2898 				lun->removable
2899 			      ? &dev_attr_file
2900 			      : &dev_attr_file_nonremovable);
2901 	if (rc)
2902 		goto error;
2903 	rc = device_create_file(&lun->dev, &dev_attr_nofua);
2904 	if (rc)
2905 		goto error;
2906 
2907 	return 0;
2908 
2909 error:
2910 	/* removing nonexistent files is a no-op */
2911 	fsg_common_remove_sysfs(lun);
2912 	device_unregister(&lun->dev);
2913 	return rc;
2914 }
2915 
2916 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
2917 			  unsigned int id, const char *name,
2918 			  const char **name_pfx)
2919 {
2920 	struct fsg_lun *lun;
2921 	char *pathbuf, *p;
2922 	int rc = -ENOMEM;
2923 
2924 	if (!common->nluns || !common->luns)
2925 		return -ENODEV;
2926 
2927 	if (common->luns[id])
2928 		return -EBUSY;
2929 
2930 	if (!cfg->filename && !cfg->removable) {
2931 		pr_err("no file given for LUN%d\n", id);
2932 		return -EINVAL;
2933 	}
2934 
2935 	lun = kzalloc(sizeof(*lun), GFP_KERNEL);
2936 	if (!lun)
2937 		return -ENOMEM;
2938 
2939 	lun->name_pfx = name_pfx;
2940 
2941 	lun->cdrom = !!cfg->cdrom;
2942 	lun->ro = cfg->cdrom || cfg->ro;
2943 	lun->initially_ro = lun->ro;
2944 	lun->removable = !!cfg->removable;
2945 
2946 	if (!common->sysfs) {
2947 		/* we DON'T own the name!*/
2948 		lun->name = name;
2949 	} else {
2950 		lun->dev.release = fsg_lun_release;
2951 		lun->dev.parent = &common->gadget->dev;
2952 		dev_set_drvdata(&lun->dev, &common->filesem);
2953 		dev_set_name(&lun->dev, "%s", name);
2954 		lun->name = dev_name(&lun->dev);
2955 
2956 		rc = fsg_common_add_sysfs(common, lun);
2957 		if (rc) {
2958 			pr_info("failed to register LUN%d: %d\n", id, rc);
2959 			goto error_sysfs;
2960 		}
2961 	}
2962 
2963 	common->luns[id] = lun;
2964 
2965 	if (cfg->filename) {
2966 		rc = fsg_lun_open(lun, cfg->filename);
2967 		if (rc)
2968 			goto error_lun;
2969 	}
2970 
2971 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
2972 	p = "(no medium)";
2973 	if (fsg_lun_is_open(lun)) {
2974 		p = "(error)";
2975 		if (pathbuf) {
2976 			p = d_path(&lun->filp->f_path, pathbuf, PATH_MAX);
2977 			if (IS_ERR(p))
2978 				p = "(error)";
2979 		}
2980 	}
2981 	pr_info("LUN: %s%s%sfile: %s\n",
2982 	      lun->removable ? "removable " : "",
2983 	      lun->ro ? "read only " : "",
2984 	      lun->cdrom ? "CD-ROM " : "",
2985 	      p);
2986 	kfree(pathbuf);
2987 
2988 	return 0;
2989 
2990 error_lun:
2991 	if (common->sysfs) {
2992 		fsg_common_remove_sysfs(lun);
2993 		device_unregister(&lun->dev);
2994 	}
2995 	fsg_lun_close(lun);
2996 	common->luns[id] = NULL;
2997 error_sysfs:
2998 	kfree(lun);
2999 	return rc;
3000 }
3001 EXPORT_SYMBOL_GPL(fsg_common_create_lun);
3002 
3003 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg)
3004 {
3005 	char buf[8]; /* enough for 100000000 different numbers, decimal */
3006 	int i, rc;
3007 
3008 	for (i = 0; i < common->nluns; ++i) {
3009 		snprintf(buf, sizeof(buf), "lun%d", i);
3010 		rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL);
3011 		if (rc)
3012 			goto fail;
3013 	}
3014 
3015 	pr_info("Number of LUNs=%d\n", common->nluns);
3016 
3017 	return 0;
3018 
3019 fail:
3020 	_fsg_common_remove_luns(common, i);
3021 	return rc;
3022 }
3023 EXPORT_SYMBOL_GPL(fsg_common_create_luns);
3024 
3025 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
3026 				   const char *pn)
3027 {
3028 	int i;
3029 
3030 	/* Prepare inquiryString */
3031 	i = get_default_bcdDevice();
3032 	snprintf(common->inquiry_string, sizeof(common->inquiry_string),
3033 		 "%-8s%-16s%04x", vn ?: "Linux",
3034 		 /* Assume product name dependent on the first LUN */
3035 		 pn ?: ((*common->luns)->cdrom
3036 		     ? "File-CD Gadget"
3037 		     : "File-Stor Gadget"),
3038 		 i);
3039 }
3040 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string);
3041 
3042 int fsg_common_run_thread(struct fsg_common *common)
3043 {
3044 	common->state = FSG_STATE_IDLE;
3045 	/* Tell the thread to start working */
3046 	common->thread_task =
3047 		kthread_create(fsg_main_thread, common, "file-storage");
3048 	if (IS_ERR(common->thread_task)) {
3049 		common->state = FSG_STATE_TERMINATED;
3050 		return PTR_ERR(common->thread_task);
3051 	}
3052 
3053 	DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task));
3054 
3055 	wake_up_process(common->thread_task);
3056 
3057 	return 0;
3058 }
3059 EXPORT_SYMBOL_GPL(fsg_common_run_thread);
3060 
3061 static void fsg_common_release(struct kref *ref)
3062 {
3063 	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
3064 
3065 	/* If the thread isn't already dead, tell it to exit now */
3066 	if (common->state != FSG_STATE_TERMINATED) {
3067 		raise_exception(common, FSG_STATE_EXIT);
3068 		wait_for_completion(&common->thread_notifier);
3069 	}
3070 
3071 	if (likely(common->luns)) {
3072 		struct fsg_lun **lun_it = common->luns;
3073 		unsigned i = common->nluns;
3074 
3075 		/* In error recovery common->nluns may be zero. */
3076 		for (; i; --i, ++lun_it) {
3077 			struct fsg_lun *lun = *lun_it;
3078 			if (!lun)
3079 				continue;
3080 			if (common->sysfs)
3081 				fsg_common_remove_sysfs(lun);
3082 			fsg_lun_close(lun);
3083 			if (common->sysfs)
3084 				device_unregister(&lun->dev);
3085 			kfree(lun);
3086 		}
3087 
3088 		kfree(common->luns);
3089 	}
3090 
3091 	_fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers);
3092 	if (common->free_storage_on_release)
3093 		kfree(common);
3094 }
3095 
3096 
3097 /*-------------------------------------------------------------------------*/
3098 
3099 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
3100 {
3101 	struct fsg_dev		*fsg = fsg_from_func(f);
3102 	struct usb_gadget	*gadget = c->cdev->gadget;
3103 	int			i;
3104 	struct usb_ep		*ep;
3105 	unsigned		max_burst;
3106 	int			ret;
3107 	struct fsg_opts		*opts;
3108 
3109 	opts = fsg_opts_from_func_inst(f->fi);
3110 	if (!opts->no_configfs) {
3111 		ret = fsg_common_set_cdev(fsg->common, c->cdev,
3112 					  fsg->common->can_stall);
3113 		if (ret)
3114 			return ret;
3115 		fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
3116 		ret = fsg_common_run_thread(fsg->common);
3117 		if (ret)
3118 			return ret;
3119 	}
3120 
3121 	fsg->gadget = gadget;
3122 
3123 	/* New interface */
3124 	i = usb_interface_id(c, f);
3125 	if (i < 0)
3126 		return i;
3127 	fsg_intf_desc.bInterfaceNumber = i;
3128 	fsg->interface_number = i;
3129 
3130 	/* Find all the endpoints we will use */
3131 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
3132 	if (!ep)
3133 		goto autoconf_fail;
3134 	ep->driver_data = fsg->common;	/* claim the endpoint */
3135 	fsg->bulk_in = ep;
3136 
3137 	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
3138 	if (!ep)
3139 		goto autoconf_fail;
3140 	ep->driver_data = fsg->common;	/* claim the endpoint */
3141 	fsg->bulk_out = ep;
3142 
3143 	/* Assume endpoint addresses are the same for both speeds */
3144 	fsg_hs_bulk_in_desc.bEndpointAddress =
3145 		fsg_fs_bulk_in_desc.bEndpointAddress;
3146 	fsg_hs_bulk_out_desc.bEndpointAddress =
3147 		fsg_fs_bulk_out_desc.bEndpointAddress;
3148 
3149 	/* Calculate bMaxBurst, we know packet size is 1024 */
3150 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
3151 
3152 	fsg_ss_bulk_in_desc.bEndpointAddress =
3153 		fsg_fs_bulk_in_desc.bEndpointAddress;
3154 	fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
3155 
3156 	fsg_ss_bulk_out_desc.bEndpointAddress =
3157 		fsg_fs_bulk_out_desc.bEndpointAddress;
3158 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
3159 
3160 	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
3161 			fsg_ss_function);
3162 	if (ret)
3163 		goto autoconf_fail;
3164 
3165 	return 0;
3166 
3167 autoconf_fail:
3168 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
3169 	return -ENOTSUPP;
3170 }
3171 
3172 /****************************** ALLOCATE FUNCTION *************************/
3173 
3174 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
3175 {
3176 	struct fsg_dev		*fsg = fsg_from_func(f);
3177 	struct fsg_common	*common = fsg->common;
3178 
3179 	DBG(fsg, "unbind\n");
3180 	if (fsg->common->fsg == fsg) {
3181 		fsg->common->new_fsg = NULL;
3182 		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
3183 		/* FIXME: make interruptible or killable somehow? */
3184 		wait_event(common->fsg_wait, common->fsg != fsg);
3185 	}
3186 
3187 	usb_free_all_descriptors(&fsg->function);
3188 }
3189 
3190 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item)
3191 {
3192 	return container_of(to_config_group(item), struct fsg_lun_opts, group);
3193 }
3194 
3195 static inline struct fsg_opts *to_fsg_opts(struct config_item *item)
3196 {
3197 	return container_of(to_config_group(item), struct fsg_opts,
3198 			    func_inst.group);
3199 }
3200 
3201 CONFIGFS_ATTR_STRUCT(fsg_lun_opts);
3202 CONFIGFS_ATTR_OPS(fsg_lun_opts);
3203 
3204 static void fsg_lun_attr_release(struct config_item *item)
3205 {
3206 	struct fsg_lun_opts *lun_opts;
3207 
3208 	lun_opts = to_fsg_lun_opts(item);
3209 	kfree(lun_opts);
3210 }
3211 
3212 static struct configfs_item_operations fsg_lun_item_ops = {
3213 	.release		= fsg_lun_attr_release,
3214 	.show_attribute		= fsg_lun_opts_attr_show,
3215 	.store_attribute	= fsg_lun_opts_attr_store,
3216 };
3217 
3218 static ssize_t fsg_lun_opts_file_show(struct fsg_lun_opts *opts, char *page)
3219 {
3220 	struct fsg_opts *fsg_opts;
3221 
3222 	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3223 
3224 	return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page);
3225 }
3226 
3227 static ssize_t fsg_lun_opts_file_store(struct fsg_lun_opts *opts,
3228 				       const char *page, size_t len)
3229 {
3230 	struct fsg_opts *fsg_opts;
3231 
3232 	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3233 
3234 	return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len);
3235 }
3236 
3237 static struct fsg_lun_opts_attribute fsg_lun_opts_file =
3238 	__CONFIGFS_ATTR(file, S_IRUGO | S_IWUSR, fsg_lun_opts_file_show,
3239 			fsg_lun_opts_file_store);
3240 
3241 static ssize_t fsg_lun_opts_ro_show(struct fsg_lun_opts *opts, char *page)
3242 {
3243 	return fsg_show_ro(opts->lun, page);
3244 }
3245 
3246 static ssize_t fsg_lun_opts_ro_store(struct fsg_lun_opts *opts,
3247 				       const char *page, size_t len)
3248 {
3249 	struct fsg_opts *fsg_opts;
3250 
3251 	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3252 
3253 	return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len);
3254 }
3255 
3256 static struct fsg_lun_opts_attribute fsg_lun_opts_ro =
3257 	__CONFIGFS_ATTR(ro, S_IRUGO | S_IWUSR, fsg_lun_opts_ro_show,
3258 			fsg_lun_opts_ro_store);
3259 
3260 static ssize_t fsg_lun_opts_removable_show(struct fsg_lun_opts *opts,
3261 					   char *page)
3262 {
3263 	return fsg_show_removable(opts->lun, page);
3264 }
3265 
3266 static ssize_t fsg_lun_opts_removable_store(struct fsg_lun_opts *opts,
3267 				       const char *page, size_t len)
3268 {
3269 	return fsg_store_removable(opts->lun, page, len);
3270 }
3271 
3272 static struct fsg_lun_opts_attribute fsg_lun_opts_removable =
3273 	__CONFIGFS_ATTR(removable, S_IRUGO | S_IWUSR,
3274 			fsg_lun_opts_removable_show,
3275 			fsg_lun_opts_removable_store);
3276 
3277 static ssize_t fsg_lun_opts_cdrom_show(struct fsg_lun_opts *opts, char *page)
3278 {
3279 	return fsg_show_cdrom(opts->lun, page);
3280 }
3281 
3282 static ssize_t fsg_lun_opts_cdrom_store(struct fsg_lun_opts *opts,
3283 				       const char *page, size_t len)
3284 {
3285 	struct fsg_opts *fsg_opts;
3286 
3287 	fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent);
3288 
3289 	return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page,
3290 			       len);
3291 }
3292 
3293 static struct fsg_lun_opts_attribute fsg_lun_opts_cdrom =
3294 	__CONFIGFS_ATTR(cdrom, S_IRUGO | S_IWUSR, fsg_lun_opts_cdrom_show,
3295 			fsg_lun_opts_cdrom_store);
3296 
3297 static ssize_t fsg_lun_opts_nofua_show(struct fsg_lun_opts *opts, char *page)
3298 {
3299 	return fsg_show_nofua(opts->lun, page);
3300 }
3301 
3302 static ssize_t fsg_lun_opts_nofua_store(struct fsg_lun_opts *opts,
3303 				       const char *page, size_t len)
3304 {
3305 	return fsg_store_nofua(opts->lun, page, len);
3306 }
3307 
3308 static struct fsg_lun_opts_attribute fsg_lun_opts_nofua =
3309 	__CONFIGFS_ATTR(nofua, S_IRUGO | S_IWUSR, fsg_lun_opts_nofua_show,
3310 			fsg_lun_opts_nofua_store);
3311 
3312 static struct configfs_attribute *fsg_lun_attrs[] = {
3313 	&fsg_lun_opts_file.attr,
3314 	&fsg_lun_opts_ro.attr,
3315 	&fsg_lun_opts_removable.attr,
3316 	&fsg_lun_opts_cdrom.attr,
3317 	&fsg_lun_opts_nofua.attr,
3318 	NULL,
3319 };
3320 
3321 static struct config_item_type fsg_lun_type = {
3322 	.ct_item_ops	= &fsg_lun_item_ops,
3323 	.ct_attrs	= fsg_lun_attrs,
3324 	.ct_owner	= THIS_MODULE,
3325 };
3326 
3327 static struct config_group *fsg_lun_make(struct config_group *group,
3328 					 const char *name)
3329 {
3330 	struct fsg_lun_opts *opts;
3331 	struct fsg_opts *fsg_opts;
3332 	struct fsg_lun_config config;
3333 	char *num_str;
3334 	u8 num;
3335 	int ret;
3336 
3337 	num_str = strchr(name, '.');
3338 	if (!num_str) {
3339 		pr_err("Unable to locate . in LUN.NUMBER\n");
3340 		return ERR_PTR(-EINVAL);
3341 	}
3342 	num_str++;
3343 
3344 	ret = kstrtou8(num_str, 0, &num);
3345 	if (ret)
3346 		return ERR_PTR(ret);
3347 
3348 	fsg_opts = to_fsg_opts(&group->cg_item);
3349 	if (num >= FSG_MAX_LUNS)
3350 		return ERR_PTR(-ERANGE);
3351 
3352 	mutex_lock(&fsg_opts->lock);
3353 	if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
3354 		ret = -EBUSY;
3355 		goto out;
3356 	}
3357 
3358 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3359 	if (!opts) {
3360 		ret = -ENOMEM;
3361 		goto out;
3362 	}
3363 
3364 	memset(&config, 0, sizeof(config));
3365 	config.removable = true;
3366 
3367 	ret = fsg_common_create_lun(fsg_opts->common, &config, num, name,
3368 				    (const char **)&group->cg_item.ci_name);
3369 	if (ret) {
3370 		kfree(opts);
3371 		goto out;
3372 	}
3373 	opts->lun = fsg_opts->common->luns[num];
3374 	opts->lun_id = num;
3375 	mutex_unlock(&fsg_opts->lock);
3376 
3377 	config_group_init_type_name(&opts->group, name, &fsg_lun_type);
3378 
3379 	return &opts->group;
3380 out:
3381 	mutex_unlock(&fsg_opts->lock);
3382 	return ERR_PTR(ret);
3383 }
3384 
3385 static void fsg_lun_drop(struct config_group *group, struct config_item *item)
3386 {
3387 	struct fsg_lun_opts *lun_opts;
3388 	struct fsg_opts *fsg_opts;
3389 
3390 	lun_opts = to_fsg_lun_opts(item);
3391 	fsg_opts = to_fsg_opts(&group->cg_item);
3392 
3393 	mutex_lock(&fsg_opts->lock);
3394 	if (fsg_opts->refcnt) {
3395 		struct config_item *gadget;
3396 
3397 		gadget = group->cg_item.ci_parent->ci_parent;
3398 		unregister_gadget_item(gadget);
3399 	}
3400 
3401 	fsg_common_remove_lun(lun_opts->lun, fsg_opts->common->sysfs);
3402 	fsg_opts->common->luns[lun_opts->lun_id] = NULL;
3403 	lun_opts->lun_id = 0;
3404 	mutex_unlock(&fsg_opts->lock);
3405 
3406 	config_item_put(item);
3407 }
3408 
3409 CONFIGFS_ATTR_STRUCT(fsg_opts);
3410 CONFIGFS_ATTR_OPS(fsg_opts);
3411 
3412 static void fsg_attr_release(struct config_item *item)
3413 {
3414 	struct fsg_opts *opts = to_fsg_opts(item);
3415 
3416 	usb_put_function_instance(&opts->func_inst);
3417 }
3418 
3419 static struct configfs_item_operations fsg_item_ops = {
3420 	.release		= fsg_attr_release,
3421 	.show_attribute		= fsg_opts_attr_show,
3422 	.store_attribute	= fsg_opts_attr_store,
3423 };
3424 
3425 static ssize_t fsg_opts_stall_show(struct fsg_opts *opts, char *page)
3426 {
3427 	int result;
3428 
3429 	mutex_lock(&opts->lock);
3430 	result = sprintf(page, "%d", opts->common->can_stall);
3431 	mutex_unlock(&opts->lock);
3432 
3433 	return result;
3434 }
3435 
3436 static ssize_t fsg_opts_stall_store(struct fsg_opts *opts, const char *page,
3437 				    size_t len)
3438 {
3439 	int ret;
3440 	bool stall;
3441 
3442 	mutex_lock(&opts->lock);
3443 
3444 	if (opts->refcnt) {
3445 		mutex_unlock(&opts->lock);
3446 		return -EBUSY;
3447 	}
3448 
3449 	ret = strtobool(page, &stall);
3450 	if (!ret) {
3451 		opts->common->can_stall = stall;
3452 		ret = len;
3453 	}
3454 
3455 	mutex_unlock(&opts->lock);
3456 
3457 	return ret;
3458 }
3459 
3460 static struct fsg_opts_attribute fsg_opts_stall =
3461 	__CONFIGFS_ATTR(stall, S_IRUGO | S_IWUSR, fsg_opts_stall_show,
3462 			fsg_opts_stall_store);
3463 
3464 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3465 static ssize_t fsg_opts_num_buffers_show(struct fsg_opts *opts, char *page)
3466 {
3467 	int result;
3468 
3469 	mutex_lock(&opts->lock);
3470 	result = sprintf(page, "%d", opts->common->fsg_num_buffers);
3471 	mutex_unlock(&opts->lock);
3472 
3473 	return result;
3474 }
3475 
3476 static ssize_t fsg_opts_num_buffers_store(struct fsg_opts *opts,
3477 					  const char *page, size_t len)
3478 {
3479 	int ret;
3480 	u8 num;
3481 
3482 	mutex_lock(&opts->lock);
3483 	if (opts->refcnt) {
3484 		ret = -EBUSY;
3485 		goto end;
3486 	}
3487 	ret = kstrtou8(page, 0, &num);
3488 	if (ret)
3489 		goto end;
3490 
3491 	ret = fsg_num_buffers_validate(num);
3492 	if (ret)
3493 		goto end;
3494 
3495 	fsg_common_set_num_buffers(opts->common, num);
3496 	ret = len;
3497 
3498 end:
3499 	mutex_unlock(&opts->lock);
3500 	return ret;
3501 }
3502 
3503 static struct fsg_opts_attribute fsg_opts_num_buffers =
3504 	__CONFIGFS_ATTR(num_buffers, S_IRUGO | S_IWUSR,
3505 			fsg_opts_num_buffers_show,
3506 			fsg_opts_num_buffers_store);
3507 
3508 #endif
3509 
3510 static struct configfs_attribute *fsg_attrs[] = {
3511 	&fsg_opts_stall.attr,
3512 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
3513 	&fsg_opts_num_buffers.attr,
3514 #endif
3515 	NULL,
3516 };
3517 
3518 static struct configfs_group_operations fsg_group_ops = {
3519 	.make_group	= fsg_lun_make,
3520 	.drop_item	= fsg_lun_drop,
3521 };
3522 
3523 static struct config_item_type fsg_func_type = {
3524 	.ct_item_ops	= &fsg_item_ops,
3525 	.ct_group_ops	= &fsg_group_ops,
3526 	.ct_attrs	= fsg_attrs,
3527 	.ct_owner	= THIS_MODULE,
3528 };
3529 
3530 static void fsg_free_inst(struct usb_function_instance *fi)
3531 {
3532 	struct fsg_opts *opts;
3533 
3534 	opts = fsg_opts_from_func_inst(fi);
3535 	fsg_common_put(opts->common);
3536 	kfree(opts);
3537 }
3538 
3539 static struct usb_function_instance *fsg_alloc_inst(void)
3540 {
3541 	struct fsg_opts *opts;
3542 	struct fsg_lun_config config;
3543 	int rc;
3544 
3545 	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
3546 	if (!opts)
3547 		return ERR_PTR(-ENOMEM);
3548 	mutex_init(&opts->lock);
3549 	opts->func_inst.free_func_inst = fsg_free_inst;
3550 	opts->common = fsg_common_setup(opts->common);
3551 	if (IS_ERR(opts->common)) {
3552 		rc = PTR_ERR(opts->common);
3553 		goto release_opts;
3554 	}
3555 	rc = fsg_common_set_nluns(opts->common, FSG_MAX_LUNS);
3556 	if (rc)
3557 		goto release_opts;
3558 
3559 	rc = fsg_common_set_num_buffers(opts->common,
3560 					CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS);
3561 	if (rc)
3562 		goto release_luns;
3563 
3564 	pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
3565 
3566 	memset(&config, 0, sizeof(config));
3567 	config.removable = true;
3568 	rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0",
3569 			(const char **)&opts->func_inst.group.cg_item.ci_name);
3570 	opts->lun0.lun = opts->common->luns[0];
3571 	opts->lun0.lun_id = 0;
3572 	config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type);
3573 	opts->default_groups[0] = &opts->lun0.group;
3574 	opts->func_inst.group.default_groups = opts->default_groups;
3575 
3576 	config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type);
3577 
3578 	return &opts->func_inst;
3579 
3580 release_luns:
3581 	kfree(opts->common->luns);
3582 release_opts:
3583 	kfree(opts);
3584 	return ERR_PTR(rc);
3585 }
3586 
3587 static void fsg_free(struct usb_function *f)
3588 {
3589 	struct fsg_dev *fsg;
3590 	struct fsg_opts *opts;
3591 
3592 	fsg = container_of(f, struct fsg_dev, function);
3593 	opts = container_of(f->fi, struct fsg_opts, func_inst);
3594 
3595 	mutex_lock(&opts->lock);
3596 	opts->refcnt--;
3597 	mutex_unlock(&opts->lock);
3598 
3599 	kfree(fsg);
3600 }
3601 
3602 static struct usb_function *fsg_alloc(struct usb_function_instance *fi)
3603 {
3604 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
3605 	struct fsg_common *common = opts->common;
3606 	struct fsg_dev *fsg;
3607 
3608 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
3609 	if (unlikely(!fsg))
3610 		return ERR_PTR(-ENOMEM);
3611 
3612 	mutex_lock(&opts->lock);
3613 	opts->refcnt++;
3614 	mutex_unlock(&opts->lock);
3615 	fsg->function.name	= FSG_DRIVER_DESC;
3616 	fsg->function.bind	= fsg_bind;
3617 	fsg->function.unbind	= fsg_unbind;
3618 	fsg->function.setup	= fsg_setup;
3619 	fsg->function.set_alt	= fsg_set_alt;
3620 	fsg->function.disable	= fsg_disable;
3621 	fsg->function.free_func	= fsg_free;
3622 
3623 	fsg->common               = common;
3624 
3625 	return &fsg->function;
3626 }
3627 
3628 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc);
3629 MODULE_LICENSE("GPL");
3630 MODULE_AUTHOR("Michal Nazarewicz");
3631 
3632 /************************* Module parameters *************************/
3633 
3634 
3635 void fsg_config_from_params(struct fsg_config *cfg,
3636 		       const struct fsg_module_parameters *params,
3637 		       unsigned int fsg_num_buffers)
3638 {
3639 	struct fsg_lun_config *lun;
3640 	unsigned i;
3641 
3642 	/* Configure LUNs */
3643 	cfg->nluns =
3644 		min(params->luns ?: (params->file_count ?: 1u),
3645 		    (unsigned)FSG_MAX_LUNS);
3646 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
3647 		lun->ro = !!params->ro[i];
3648 		lun->cdrom = !!params->cdrom[i];
3649 		lun->removable = !!params->removable[i];
3650 		lun->filename =
3651 			params->file_count > i && params->file[i][0]
3652 			? params->file[i]
3653 			: NULL;
3654 	}
3655 
3656 	/* Let MSF use defaults */
3657 	cfg->vendor_name = NULL;
3658 	cfg->product_name = NULL;
3659 
3660 	cfg->ops = NULL;
3661 	cfg->private_data = NULL;
3662 
3663 	/* Finalise */
3664 	cfg->can_stall = params->stall;
3665 	cfg->fsg_num_buffers = fsg_num_buffers;
3666 }
3667 EXPORT_SYMBOL_GPL(fsg_config_from_params);
3668