1 /* 2 * f_mass_storage.c -- Mass Storage USB Composite Function 3 * 4 * Copyright (C) 2003-2008 Alan Stern 5 * Copyright (C) 2009 Samsung Electronics 6 * Author: Michal Nazarewicz <mina86@mina86.com> 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions, and the following disclaimer, 14 * without modification. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. The names of the above-listed copyright holders may not be used 19 * to endorse or promote products derived from this software without 20 * specific prior written permission. 21 * 22 * ALTERNATIVELY, this software may be distributed under the terms of the 23 * GNU General Public License ("GPL") as published by the Free Software 24 * Foundation, either version 2 of that License or (at your option) any 25 * later version. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 28 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 29 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 31 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 32 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 33 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 34 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 35 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 36 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 37 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * The Mass Storage Function acts as a USB Mass Storage device, 42 * appearing to the host as a disk drive or as a CD-ROM drive. In 43 * addition to providing an example of a genuinely useful composite 44 * function for a USB device, it also illustrates a technique of 45 * double-buffering for increased throughput. 46 * 47 * For more information about MSF and in particular its module 48 * parameters and sysfs interface read the 49 * <Documentation/usb/mass-storage.txt> file. 50 */ 51 52 /* 53 * MSF is configured by specifying a fsg_config structure. It has the 54 * following fields: 55 * 56 * nluns Number of LUNs function have (anywhere from 1 57 * to FSG_MAX_LUNS). 58 * luns An array of LUN configuration values. This 59 * should be filled for each LUN that 60 * function will include (ie. for "nluns" 61 * LUNs). Each element of the array has 62 * the following fields: 63 * ->filename The path to the backing file for the LUN. 64 * Required if LUN is not marked as 65 * removable. 66 * ->ro Flag specifying access to the LUN shall be 67 * read-only. This is implied if CD-ROM 68 * emulation is enabled as well as when 69 * it was impossible to open "filename" 70 * in R/W mode. 71 * ->removable Flag specifying that LUN shall be indicated as 72 * being removable. 73 * ->cdrom Flag specifying that LUN shall be reported as 74 * being a CD-ROM. 75 * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) 76 * commands for this LUN shall be ignored. 77 * 78 * vendor_name 79 * product_name 80 * release Information used as a reply to INQUIRY 81 * request. To use default set to NULL, 82 * NULL, 0xffff respectively. The first 83 * field should be 8 and the second 16 84 * characters or less. 85 * 86 * can_stall Set to permit function to halt bulk endpoints. 87 * Disabled on some USB devices known not 88 * to work correctly. You should set it 89 * to true. 90 * 91 * If "removable" is not set for a LUN then a backing file must be 92 * specified. If it is set, then NULL filename means the LUN's medium 93 * is not loaded (an empty string as "filename" in the fsg_config 94 * structure causes error). The CD-ROM emulation includes a single 95 * data track and no audio tracks; hence there need be only one 96 * backing file per LUN. 97 * 98 * This function is heavily based on "File-backed Storage Gadget" by 99 * Alan Stern which in turn is heavily based on "Gadget Zero" by David 100 * Brownell. The driver's SCSI command interface was based on the 101 * "Information technology - Small Computer System Interface - 2" 102 * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, 103 * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. 104 * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which 105 * was based on the "Universal Serial Bus Mass Storage Class UFI 106 * Command Specification" document, Revision 1.0, December 14, 1998, 107 * available at 108 * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. 109 */ 110 111 /* 112 * Driver Design 113 * 114 * The MSF is fairly straightforward. There is a main kernel 115 * thread that handles most of the work. Interrupt routines field 116 * callbacks from the controller driver: bulk- and interrupt-request 117 * completion notifications, endpoint-0 events, and disconnect events. 118 * Completion events are passed to the main thread by wakeup calls. Many 119 * ep0 requests are handled at interrupt time, but SetInterface, 120 * SetConfiguration, and device reset requests are forwarded to the 121 * thread in the form of "exceptions" using SIGUSR1 signals (since they 122 * should interrupt any ongoing file I/O operations). 123 * 124 * The thread's main routine implements the standard command/data/status 125 * parts of a SCSI interaction. It and its subroutines are full of tests 126 * for pending signals/exceptions -- all this polling is necessary since 127 * the kernel has no setjmp/longjmp equivalents. (Maybe this is an 128 * indication that the driver really wants to be running in userspace.) 129 * An important point is that so long as the thread is alive it keeps an 130 * open reference to the backing file. This will prevent unmounting 131 * the backing file's underlying filesystem and could cause problems 132 * during system shutdown, for example. To prevent such problems, the 133 * thread catches INT, TERM, and KILL signals and converts them into 134 * an EXIT exception. 135 * 136 * In normal operation the main thread is started during the gadget's 137 * fsg_bind() callback and stopped during fsg_unbind(). But it can 138 * also exit when it receives a signal, and there's no point leaving 139 * the gadget running when the thread is dead. As of this moment, MSF 140 * provides no way to deregister the gadget when thread dies -- maybe 141 * a callback functions is needed. 142 * 143 * To provide maximum throughput, the driver uses a circular pipeline of 144 * buffer heads (struct fsg_buffhd). In principle the pipeline can be 145 * arbitrarily long; in practice the benefits don't justify having more 146 * than 2 stages (i.e., double buffering). But it helps to think of the 147 * pipeline as being a long one. Each buffer head contains a bulk-in and 148 * a bulk-out request pointer (since the buffer can be used for both 149 * output and input -- directions always are given from the host's 150 * point of view) as well as a pointer to the buffer and various state 151 * variables. 152 * 153 * Use of the pipeline follows a simple protocol. There is a variable 154 * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. 155 * At any time that buffer head may still be in use from an earlier 156 * request, so each buffer head has a state variable indicating whether 157 * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the 158 * buffer head to be EMPTY, filling the buffer either by file I/O or by 159 * USB I/O (during which the buffer head is BUSY), and marking the buffer 160 * head FULL when the I/O is complete. Then the buffer will be emptied 161 * (again possibly by USB I/O, during which it is marked BUSY) and 162 * finally marked EMPTY again (possibly by a completion routine). 163 * 164 * A module parameter tells the driver to avoid stalling the bulk 165 * endpoints wherever the transport specification allows. This is 166 * necessary for some UDCs like the SuperH, which cannot reliably clear a 167 * halt on a bulk endpoint. However, under certain circumstances the 168 * Bulk-only specification requires a stall. In such cases the driver 169 * will halt the endpoint and set a flag indicating that it should clear 170 * the halt in software during the next device reset. Hopefully this 171 * will permit everything to work correctly. Furthermore, although the 172 * specification allows the bulk-out endpoint to halt when the host sends 173 * too much data, implementing this would cause an unavoidable race. 174 * The driver will always use the "no-stall" approach for OUT transfers. 175 * 176 * One subtle point concerns sending status-stage responses for ep0 177 * requests. Some of these requests, such as device reset, can involve 178 * interrupting an ongoing file I/O operation, which might take an 179 * arbitrarily long time. During that delay the host might give up on 180 * the original ep0 request and issue a new one. When that happens the 181 * driver should not notify the host about completion of the original 182 * request, as the host will no longer be waiting for it. So the driver 183 * assigns to each ep0 request a unique tag, and it keeps track of the 184 * tag value of the request associated with a long-running exception 185 * (device-reset, interface-change, or configuration-change). When the 186 * exception handler is finished, the status-stage response is submitted 187 * only if the current ep0 request tag is equal to the exception request 188 * tag. Thus only the most recently received ep0 request will get a 189 * status-stage response. 190 * 191 * Warning: This driver source file is too long. It ought to be split up 192 * into a header file plus about 3 separate .c files, to handle the details 193 * of the Gadget, USB Mass Storage, and SCSI protocols. 194 */ 195 196 197 /* #define VERBOSE_DEBUG */ 198 /* #define DUMP_MSGS */ 199 200 #include <linux/blkdev.h> 201 #include <linux/completion.h> 202 #include <linux/dcache.h> 203 #include <linux/delay.h> 204 #include <linux/device.h> 205 #include <linux/fcntl.h> 206 #include <linux/file.h> 207 #include <linux/fs.h> 208 #include <linux/kref.h> 209 #include <linux/kthread.h> 210 #include <linux/limits.h> 211 #include <linux/rwsem.h> 212 #include <linux/slab.h> 213 #include <linux/spinlock.h> 214 #include <linux/string.h> 215 #include <linux/freezer.h> 216 #include <linux/module.h> 217 #include <linux/uaccess.h> 218 219 #include <linux/usb/ch9.h> 220 #include <linux/usb/gadget.h> 221 #include <linux/usb/composite.h> 222 223 #include "configfs.h" 224 225 226 /*------------------------------------------------------------------------*/ 227 228 #define FSG_DRIVER_DESC "Mass Storage Function" 229 #define FSG_DRIVER_VERSION "2009/09/11" 230 231 static const char fsg_string_interface[] = "Mass Storage"; 232 233 #include "storage_common.h" 234 #include "f_mass_storage.h" 235 236 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ 237 static struct usb_string fsg_strings[] = { 238 {FSG_STRING_INTERFACE, fsg_string_interface}, 239 {} 240 }; 241 242 static struct usb_gadget_strings fsg_stringtab = { 243 .language = 0x0409, /* en-us */ 244 .strings = fsg_strings, 245 }; 246 247 static struct usb_gadget_strings *fsg_strings_array[] = { 248 &fsg_stringtab, 249 NULL, 250 }; 251 252 /*-------------------------------------------------------------------------*/ 253 254 struct fsg_dev; 255 struct fsg_common; 256 257 /* Data shared by all the FSG instances. */ 258 struct fsg_common { 259 struct usb_gadget *gadget; 260 struct usb_composite_dev *cdev; 261 struct fsg_dev *fsg, *new_fsg; 262 wait_queue_head_t fsg_wait; 263 264 /* filesem protects: backing files in use */ 265 struct rw_semaphore filesem; 266 267 /* lock protects: state, all the req_busy's */ 268 spinlock_t lock; 269 270 struct usb_ep *ep0; /* Copy of gadget->ep0 */ 271 struct usb_request *ep0req; /* Copy of cdev->req */ 272 unsigned int ep0_req_tag; 273 274 struct fsg_buffhd *next_buffhd_to_fill; 275 struct fsg_buffhd *next_buffhd_to_drain; 276 struct fsg_buffhd *buffhds; 277 unsigned int fsg_num_buffers; 278 279 int cmnd_size; 280 u8 cmnd[MAX_COMMAND_SIZE]; 281 282 unsigned int lun; 283 struct fsg_lun *luns[FSG_MAX_LUNS]; 284 struct fsg_lun *curlun; 285 286 unsigned int bulk_out_maxpacket; 287 enum fsg_state state; /* For exception handling */ 288 unsigned int exception_req_tag; 289 290 enum data_direction data_dir; 291 u32 data_size; 292 u32 data_size_from_cmnd; 293 u32 tag; 294 u32 residue; 295 u32 usb_amount_left; 296 297 unsigned int can_stall:1; 298 unsigned int free_storage_on_release:1; 299 unsigned int phase_error:1; 300 unsigned int short_packet_received:1; 301 unsigned int bad_lun_okay:1; 302 unsigned int running:1; 303 unsigned int sysfs:1; 304 305 int thread_wakeup_needed; 306 struct completion thread_notifier; 307 struct task_struct *thread_task; 308 309 /* Callback functions. */ 310 const struct fsg_operations *ops; 311 /* Gadget's private data. */ 312 void *private_data; 313 314 /* 315 * Vendor (8 chars), product (16 chars), release (4 316 * hexadecimal digits) and NUL byte 317 */ 318 char inquiry_string[8 + 16 + 4 + 1]; 319 320 struct kref ref; 321 }; 322 323 struct fsg_dev { 324 struct usb_function function; 325 struct usb_gadget *gadget; /* Copy of cdev->gadget */ 326 struct fsg_common *common; 327 328 u16 interface_number; 329 330 unsigned int bulk_in_enabled:1; 331 unsigned int bulk_out_enabled:1; 332 333 unsigned long atomic_bitflags; 334 #define IGNORE_BULK_OUT 0 335 336 struct usb_ep *bulk_in; 337 struct usb_ep *bulk_out; 338 }; 339 340 static inline int __fsg_is_set(struct fsg_common *common, 341 const char *func, unsigned line) 342 { 343 if (common->fsg) 344 return 1; 345 ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); 346 WARN_ON(1); 347 return 0; 348 } 349 350 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) 351 352 static inline struct fsg_dev *fsg_from_func(struct usb_function *f) 353 { 354 return container_of(f, struct fsg_dev, function); 355 } 356 357 typedef void (*fsg_routine_t)(struct fsg_dev *); 358 359 static int exception_in_progress(struct fsg_common *common) 360 { 361 return common->state > FSG_STATE_IDLE; 362 } 363 364 /* Make bulk-out requests be divisible by the maxpacket size */ 365 static void set_bulk_out_req_length(struct fsg_common *common, 366 struct fsg_buffhd *bh, unsigned int length) 367 { 368 unsigned int rem; 369 370 bh->bulk_out_intended_length = length; 371 rem = length % common->bulk_out_maxpacket; 372 if (rem > 0) 373 length += common->bulk_out_maxpacket - rem; 374 bh->outreq->length = length; 375 } 376 377 378 /*-------------------------------------------------------------------------*/ 379 380 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) 381 { 382 const char *name; 383 384 if (ep == fsg->bulk_in) 385 name = "bulk-in"; 386 else if (ep == fsg->bulk_out) 387 name = "bulk-out"; 388 else 389 name = ep->name; 390 DBG(fsg, "%s set halt\n", name); 391 return usb_ep_set_halt(ep); 392 } 393 394 395 /*-------------------------------------------------------------------------*/ 396 397 /* These routines may be called in process context or in_irq */ 398 399 /* Caller must hold fsg->lock */ 400 static void wakeup_thread(struct fsg_common *common) 401 { 402 smp_wmb(); /* ensure the write of bh->state is complete */ 403 /* Tell the main thread that something has happened */ 404 common->thread_wakeup_needed = 1; 405 if (common->thread_task) 406 wake_up_process(common->thread_task); 407 } 408 409 static void raise_exception(struct fsg_common *common, enum fsg_state new_state) 410 { 411 unsigned long flags; 412 413 /* 414 * Do nothing if a higher-priority exception is already in progress. 415 * If a lower-or-equal priority exception is in progress, preempt it 416 * and notify the main thread by sending it a signal. 417 */ 418 spin_lock_irqsave(&common->lock, flags); 419 if (common->state <= new_state) { 420 common->exception_req_tag = common->ep0_req_tag; 421 common->state = new_state; 422 if (common->thread_task) 423 send_sig_info(SIGUSR1, SEND_SIG_FORCED, 424 common->thread_task); 425 } 426 spin_unlock_irqrestore(&common->lock, flags); 427 } 428 429 430 /*-------------------------------------------------------------------------*/ 431 432 static int ep0_queue(struct fsg_common *common) 433 { 434 int rc; 435 436 rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); 437 common->ep0->driver_data = common; 438 if (rc != 0 && rc != -ESHUTDOWN) { 439 /* We can't do much more than wait for a reset */ 440 WARNING(common, "error in submission: %s --> %d\n", 441 common->ep0->name, rc); 442 } 443 return rc; 444 } 445 446 447 /*-------------------------------------------------------------------------*/ 448 449 /* Completion handlers. These always run in_irq. */ 450 451 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) 452 { 453 struct fsg_common *common = ep->driver_data; 454 struct fsg_buffhd *bh = req->context; 455 456 if (req->status || req->actual != req->length) 457 DBG(common, "%s --> %d, %u/%u\n", __func__, 458 req->status, req->actual, req->length); 459 if (req->status == -ECONNRESET) /* Request was cancelled */ 460 usb_ep_fifo_flush(ep); 461 462 /* Hold the lock while we update the request and buffer states */ 463 smp_wmb(); 464 spin_lock(&common->lock); 465 bh->inreq_busy = 0; 466 bh->state = BUF_STATE_EMPTY; 467 wakeup_thread(common); 468 spin_unlock(&common->lock); 469 } 470 471 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) 472 { 473 struct fsg_common *common = ep->driver_data; 474 struct fsg_buffhd *bh = req->context; 475 476 dump_msg(common, "bulk-out", req->buf, req->actual); 477 if (req->status || req->actual != bh->bulk_out_intended_length) 478 DBG(common, "%s --> %d, %u/%u\n", __func__, 479 req->status, req->actual, bh->bulk_out_intended_length); 480 if (req->status == -ECONNRESET) /* Request was cancelled */ 481 usb_ep_fifo_flush(ep); 482 483 /* Hold the lock while we update the request and buffer states */ 484 smp_wmb(); 485 spin_lock(&common->lock); 486 bh->outreq_busy = 0; 487 bh->state = BUF_STATE_FULL; 488 wakeup_thread(common); 489 spin_unlock(&common->lock); 490 } 491 492 static int _fsg_common_get_max_lun(struct fsg_common *common) 493 { 494 int i = ARRAY_SIZE(common->luns) - 1; 495 496 while (i >= 0 && !common->luns[i]) 497 --i; 498 499 return i; 500 } 501 502 static int fsg_setup(struct usb_function *f, 503 const struct usb_ctrlrequest *ctrl) 504 { 505 struct fsg_dev *fsg = fsg_from_func(f); 506 struct usb_request *req = fsg->common->ep0req; 507 u16 w_index = le16_to_cpu(ctrl->wIndex); 508 u16 w_value = le16_to_cpu(ctrl->wValue); 509 u16 w_length = le16_to_cpu(ctrl->wLength); 510 511 if (!fsg_is_set(fsg->common)) 512 return -EOPNOTSUPP; 513 514 ++fsg->common->ep0_req_tag; /* Record arrival of a new request */ 515 req->context = NULL; 516 req->length = 0; 517 dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); 518 519 switch (ctrl->bRequest) { 520 521 case US_BULK_RESET_REQUEST: 522 if (ctrl->bRequestType != 523 (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) 524 break; 525 if (w_index != fsg->interface_number || w_value != 0 || 526 w_length != 0) 527 return -EDOM; 528 529 /* 530 * Raise an exception to stop the current operation 531 * and reinitialize our state. 532 */ 533 DBG(fsg, "bulk reset request\n"); 534 raise_exception(fsg->common, FSG_STATE_RESET); 535 return USB_GADGET_DELAYED_STATUS; 536 537 case US_BULK_GET_MAX_LUN: 538 if (ctrl->bRequestType != 539 (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) 540 break; 541 if (w_index != fsg->interface_number || w_value != 0 || 542 w_length != 1) 543 return -EDOM; 544 VDBG(fsg, "get max LUN\n"); 545 *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common); 546 547 /* Respond with data/status */ 548 req->length = min((u16)1, w_length); 549 return ep0_queue(fsg->common); 550 } 551 552 VDBG(fsg, 553 "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n", 554 ctrl->bRequestType, ctrl->bRequest, 555 le16_to_cpu(ctrl->wValue), w_index, w_length); 556 return -EOPNOTSUPP; 557 } 558 559 560 /*-------------------------------------------------------------------------*/ 561 562 /* All the following routines run in process context */ 563 564 /* Use this for bulk or interrupt transfers, not ep0 */ 565 static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, 566 struct usb_request *req, int *pbusy, 567 enum fsg_buffer_state *state) 568 { 569 int rc; 570 571 if (ep == fsg->bulk_in) 572 dump_msg(fsg, "bulk-in", req->buf, req->length); 573 574 spin_lock_irq(&fsg->common->lock); 575 *pbusy = 1; 576 *state = BUF_STATE_BUSY; 577 spin_unlock_irq(&fsg->common->lock); 578 579 rc = usb_ep_queue(ep, req, GFP_KERNEL); 580 if (rc == 0) 581 return; /* All good, we're done */ 582 583 *pbusy = 0; 584 *state = BUF_STATE_EMPTY; 585 586 /* We can't do much more than wait for a reset */ 587 588 /* 589 * Note: currently the net2280 driver fails zero-length 590 * submissions if DMA is enabled. 591 */ 592 if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && req->length == 0)) 593 WARNING(fsg, "error in submission: %s --> %d\n", ep->name, rc); 594 } 595 596 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh) 597 { 598 if (!fsg_is_set(common)) 599 return false; 600 start_transfer(common->fsg, common->fsg->bulk_in, 601 bh->inreq, &bh->inreq_busy, &bh->state); 602 return true; 603 } 604 605 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) 606 { 607 if (!fsg_is_set(common)) 608 return false; 609 start_transfer(common->fsg, common->fsg->bulk_out, 610 bh->outreq, &bh->outreq_busy, &bh->state); 611 return true; 612 } 613 614 static int sleep_thread(struct fsg_common *common, bool can_freeze) 615 { 616 int rc = 0; 617 618 /* Wait until a signal arrives or we are woken up */ 619 for (;;) { 620 if (can_freeze) 621 try_to_freeze(); 622 set_current_state(TASK_INTERRUPTIBLE); 623 if (signal_pending(current)) { 624 rc = -EINTR; 625 break; 626 } 627 if (common->thread_wakeup_needed) 628 break; 629 schedule(); 630 } 631 __set_current_state(TASK_RUNNING); 632 common->thread_wakeup_needed = 0; 633 smp_rmb(); /* ensure the latest bh->state is visible */ 634 return rc; 635 } 636 637 638 /*-------------------------------------------------------------------------*/ 639 640 static int do_read(struct fsg_common *common) 641 { 642 struct fsg_lun *curlun = common->curlun; 643 u32 lba; 644 struct fsg_buffhd *bh; 645 int rc; 646 u32 amount_left; 647 loff_t file_offset, file_offset_tmp; 648 unsigned int amount; 649 ssize_t nread; 650 651 /* 652 * Get the starting Logical Block Address and check that it's 653 * not too big. 654 */ 655 if (common->cmnd[0] == READ_6) 656 lba = get_unaligned_be24(&common->cmnd[1]); 657 else { 658 lba = get_unaligned_be32(&common->cmnd[2]); 659 660 /* 661 * We allow DPO (Disable Page Out = don't save data in the 662 * cache) and FUA (Force Unit Access = don't read from the 663 * cache), but we don't implement them. 664 */ 665 if ((common->cmnd[1] & ~0x18) != 0) { 666 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 667 return -EINVAL; 668 } 669 } 670 if (lba >= curlun->num_sectors) { 671 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 672 return -EINVAL; 673 } 674 file_offset = ((loff_t) lba) << curlun->blkbits; 675 676 /* Carry out the file reads */ 677 amount_left = common->data_size_from_cmnd; 678 if (unlikely(amount_left == 0)) 679 return -EIO; /* No default reply */ 680 681 for (;;) { 682 /* 683 * Figure out how much we need to read: 684 * Try to read the remaining amount. 685 * But don't read more than the buffer size. 686 * And don't try to read past the end of the file. 687 */ 688 amount = min(amount_left, FSG_BUFLEN); 689 amount = min((loff_t)amount, 690 curlun->file_length - file_offset); 691 692 /* Wait for the next buffer to become available */ 693 bh = common->next_buffhd_to_fill; 694 while (bh->state != BUF_STATE_EMPTY) { 695 rc = sleep_thread(common, false); 696 if (rc) 697 return rc; 698 } 699 700 /* 701 * If we were asked to read past the end of file, 702 * end with an empty buffer. 703 */ 704 if (amount == 0) { 705 curlun->sense_data = 706 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 707 curlun->sense_data_info = 708 file_offset >> curlun->blkbits; 709 curlun->info_valid = 1; 710 bh->inreq->length = 0; 711 bh->state = BUF_STATE_FULL; 712 break; 713 } 714 715 /* Perform the read */ 716 file_offset_tmp = file_offset; 717 nread = vfs_read(curlun->filp, 718 (char __user *)bh->buf, 719 amount, &file_offset_tmp); 720 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, 721 (unsigned long long)file_offset, (int)nread); 722 if (signal_pending(current)) 723 return -EINTR; 724 725 if (nread < 0) { 726 LDBG(curlun, "error in file read: %d\n", (int)nread); 727 nread = 0; 728 } else if (nread < amount) { 729 LDBG(curlun, "partial file read: %d/%u\n", 730 (int)nread, amount); 731 nread = round_down(nread, curlun->blksize); 732 } 733 file_offset += nread; 734 amount_left -= nread; 735 common->residue -= nread; 736 737 /* 738 * Except at the end of the transfer, nread will be 739 * equal to the buffer size, which is divisible by the 740 * bulk-in maxpacket size. 741 */ 742 bh->inreq->length = nread; 743 bh->state = BUF_STATE_FULL; 744 745 /* If an error occurred, report it and its position */ 746 if (nread < amount) { 747 curlun->sense_data = SS_UNRECOVERED_READ_ERROR; 748 curlun->sense_data_info = 749 file_offset >> curlun->blkbits; 750 curlun->info_valid = 1; 751 break; 752 } 753 754 if (amount_left == 0) 755 break; /* No more left to read */ 756 757 /* Send this buffer and go read some more */ 758 bh->inreq->zero = 0; 759 if (!start_in_transfer(common, bh)) 760 /* Don't know what to do if common->fsg is NULL */ 761 return -EIO; 762 common->next_buffhd_to_fill = bh->next; 763 } 764 765 return -EIO; /* No default reply */ 766 } 767 768 769 /*-------------------------------------------------------------------------*/ 770 771 static int do_write(struct fsg_common *common) 772 { 773 struct fsg_lun *curlun = common->curlun; 774 u32 lba; 775 struct fsg_buffhd *bh; 776 int get_some_more; 777 u32 amount_left_to_req, amount_left_to_write; 778 loff_t usb_offset, file_offset, file_offset_tmp; 779 unsigned int amount; 780 ssize_t nwritten; 781 int rc; 782 783 if (curlun->ro) { 784 curlun->sense_data = SS_WRITE_PROTECTED; 785 return -EINVAL; 786 } 787 spin_lock(&curlun->filp->f_lock); 788 curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */ 789 spin_unlock(&curlun->filp->f_lock); 790 791 /* 792 * Get the starting Logical Block Address and check that it's 793 * not too big 794 */ 795 if (common->cmnd[0] == WRITE_6) 796 lba = get_unaligned_be24(&common->cmnd[1]); 797 else { 798 lba = get_unaligned_be32(&common->cmnd[2]); 799 800 /* 801 * We allow DPO (Disable Page Out = don't save data in the 802 * cache) and FUA (Force Unit Access = write directly to the 803 * medium). We don't implement DPO; we implement FUA by 804 * performing synchronous output. 805 */ 806 if (common->cmnd[1] & ~0x18) { 807 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 808 return -EINVAL; 809 } 810 if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */ 811 spin_lock(&curlun->filp->f_lock); 812 curlun->filp->f_flags |= O_SYNC; 813 spin_unlock(&curlun->filp->f_lock); 814 } 815 } 816 if (lba >= curlun->num_sectors) { 817 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 818 return -EINVAL; 819 } 820 821 /* Carry out the file writes */ 822 get_some_more = 1; 823 file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; 824 amount_left_to_req = common->data_size_from_cmnd; 825 amount_left_to_write = common->data_size_from_cmnd; 826 827 while (amount_left_to_write > 0) { 828 829 /* Queue a request for more data from the host */ 830 bh = common->next_buffhd_to_fill; 831 if (bh->state == BUF_STATE_EMPTY && get_some_more) { 832 833 /* 834 * Figure out how much we want to get: 835 * Try to get the remaining amount, 836 * but not more than the buffer size. 837 */ 838 amount = min(amount_left_to_req, FSG_BUFLEN); 839 840 /* Beyond the end of the backing file? */ 841 if (usb_offset >= curlun->file_length) { 842 get_some_more = 0; 843 curlun->sense_data = 844 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 845 curlun->sense_data_info = 846 usb_offset >> curlun->blkbits; 847 curlun->info_valid = 1; 848 continue; 849 } 850 851 /* Get the next buffer */ 852 usb_offset += amount; 853 common->usb_amount_left -= amount; 854 amount_left_to_req -= amount; 855 if (amount_left_to_req == 0) 856 get_some_more = 0; 857 858 /* 859 * Except at the end of the transfer, amount will be 860 * equal to the buffer size, which is divisible by 861 * the bulk-out maxpacket size. 862 */ 863 set_bulk_out_req_length(common, bh, amount); 864 if (!start_out_transfer(common, bh)) 865 /* Dunno what to do if common->fsg is NULL */ 866 return -EIO; 867 common->next_buffhd_to_fill = bh->next; 868 continue; 869 } 870 871 /* Write the received data to the backing file */ 872 bh = common->next_buffhd_to_drain; 873 if (bh->state == BUF_STATE_EMPTY && !get_some_more) 874 break; /* We stopped early */ 875 if (bh->state == BUF_STATE_FULL) { 876 smp_rmb(); 877 common->next_buffhd_to_drain = bh->next; 878 bh->state = BUF_STATE_EMPTY; 879 880 /* Did something go wrong with the transfer? */ 881 if (bh->outreq->status != 0) { 882 curlun->sense_data = SS_COMMUNICATION_FAILURE; 883 curlun->sense_data_info = 884 file_offset >> curlun->blkbits; 885 curlun->info_valid = 1; 886 break; 887 } 888 889 amount = bh->outreq->actual; 890 if (curlun->file_length - file_offset < amount) { 891 LERROR(curlun, 892 "write %u @ %llu beyond end %llu\n", 893 amount, (unsigned long long)file_offset, 894 (unsigned long long)curlun->file_length); 895 amount = curlun->file_length - file_offset; 896 } 897 898 /* Don't accept excess data. The spec doesn't say 899 * what to do in this case. We'll ignore the error. 900 */ 901 amount = min(amount, bh->bulk_out_intended_length); 902 903 /* Don't write a partial block */ 904 amount = round_down(amount, curlun->blksize); 905 if (amount == 0) 906 goto empty_write; 907 908 /* Perform the write */ 909 file_offset_tmp = file_offset; 910 nwritten = vfs_write(curlun->filp, 911 (char __user *)bh->buf, 912 amount, &file_offset_tmp); 913 VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, 914 (unsigned long long)file_offset, (int)nwritten); 915 if (signal_pending(current)) 916 return -EINTR; /* Interrupted! */ 917 918 if (nwritten < 0) { 919 LDBG(curlun, "error in file write: %d\n", 920 (int)nwritten); 921 nwritten = 0; 922 } else if (nwritten < amount) { 923 LDBG(curlun, "partial file write: %d/%u\n", 924 (int)nwritten, amount); 925 nwritten = round_down(nwritten, curlun->blksize); 926 } 927 file_offset += nwritten; 928 amount_left_to_write -= nwritten; 929 common->residue -= nwritten; 930 931 /* If an error occurred, report it and its position */ 932 if (nwritten < amount) { 933 curlun->sense_data = SS_WRITE_ERROR; 934 curlun->sense_data_info = 935 file_offset >> curlun->blkbits; 936 curlun->info_valid = 1; 937 break; 938 } 939 940 empty_write: 941 /* Did the host decide to stop early? */ 942 if (bh->outreq->actual < bh->bulk_out_intended_length) { 943 common->short_packet_received = 1; 944 break; 945 } 946 continue; 947 } 948 949 /* Wait for something to happen */ 950 rc = sleep_thread(common, false); 951 if (rc) 952 return rc; 953 } 954 955 return -EIO; /* No default reply */ 956 } 957 958 959 /*-------------------------------------------------------------------------*/ 960 961 static int do_synchronize_cache(struct fsg_common *common) 962 { 963 struct fsg_lun *curlun = common->curlun; 964 int rc; 965 966 /* We ignore the requested LBA and write out all file's 967 * dirty data buffers. */ 968 rc = fsg_lun_fsync_sub(curlun); 969 if (rc) 970 curlun->sense_data = SS_WRITE_ERROR; 971 return 0; 972 } 973 974 975 /*-------------------------------------------------------------------------*/ 976 977 static void invalidate_sub(struct fsg_lun *curlun) 978 { 979 struct file *filp = curlun->filp; 980 struct inode *inode = file_inode(filp); 981 unsigned long rc; 982 983 rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); 984 VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); 985 } 986 987 static int do_verify(struct fsg_common *common) 988 { 989 struct fsg_lun *curlun = common->curlun; 990 u32 lba; 991 u32 verification_length; 992 struct fsg_buffhd *bh = common->next_buffhd_to_fill; 993 loff_t file_offset, file_offset_tmp; 994 u32 amount_left; 995 unsigned int amount; 996 ssize_t nread; 997 998 /* 999 * Get the starting Logical Block Address and check that it's 1000 * not too big. 1001 */ 1002 lba = get_unaligned_be32(&common->cmnd[2]); 1003 if (lba >= curlun->num_sectors) { 1004 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1005 return -EINVAL; 1006 } 1007 1008 /* 1009 * We allow DPO (Disable Page Out = don't save data in the 1010 * cache) but we don't implement it. 1011 */ 1012 if (common->cmnd[1] & ~0x10) { 1013 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1014 return -EINVAL; 1015 } 1016 1017 verification_length = get_unaligned_be16(&common->cmnd[7]); 1018 if (unlikely(verification_length == 0)) 1019 return -EIO; /* No default reply */ 1020 1021 /* Prepare to carry out the file verify */ 1022 amount_left = verification_length << curlun->blkbits; 1023 file_offset = ((loff_t) lba) << curlun->blkbits; 1024 1025 /* Write out all the dirty buffers before invalidating them */ 1026 fsg_lun_fsync_sub(curlun); 1027 if (signal_pending(current)) 1028 return -EINTR; 1029 1030 invalidate_sub(curlun); 1031 if (signal_pending(current)) 1032 return -EINTR; 1033 1034 /* Just try to read the requested blocks */ 1035 while (amount_left > 0) { 1036 /* 1037 * Figure out how much we need to read: 1038 * Try to read the remaining amount, but not more than 1039 * the buffer size. 1040 * And don't try to read past the end of the file. 1041 */ 1042 amount = min(amount_left, FSG_BUFLEN); 1043 amount = min((loff_t)amount, 1044 curlun->file_length - file_offset); 1045 if (amount == 0) { 1046 curlun->sense_data = 1047 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1048 curlun->sense_data_info = 1049 file_offset >> curlun->blkbits; 1050 curlun->info_valid = 1; 1051 break; 1052 } 1053 1054 /* Perform the read */ 1055 file_offset_tmp = file_offset; 1056 nread = vfs_read(curlun->filp, 1057 (char __user *) bh->buf, 1058 amount, &file_offset_tmp); 1059 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, 1060 (unsigned long long) file_offset, 1061 (int) nread); 1062 if (signal_pending(current)) 1063 return -EINTR; 1064 1065 if (nread < 0) { 1066 LDBG(curlun, "error in file verify: %d\n", (int)nread); 1067 nread = 0; 1068 } else if (nread < amount) { 1069 LDBG(curlun, "partial file verify: %d/%u\n", 1070 (int)nread, amount); 1071 nread = round_down(nread, curlun->blksize); 1072 } 1073 if (nread == 0) { 1074 curlun->sense_data = SS_UNRECOVERED_READ_ERROR; 1075 curlun->sense_data_info = 1076 file_offset >> curlun->blkbits; 1077 curlun->info_valid = 1; 1078 break; 1079 } 1080 file_offset += nread; 1081 amount_left -= nread; 1082 } 1083 return 0; 1084 } 1085 1086 1087 /*-------------------------------------------------------------------------*/ 1088 1089 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) 1090 { 1091 struct fsg_lun *curlun = common->curlun; 1092 u8 *buf = (u8 *) bh->buf; 1093 1094 if (!curlun) { /* Unsupported LUNs are okay */ 1095 common->bad_lun_okay = 1; 1096 memset(buf, 0, 36); 1097 buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */ 1098 buf[4] = 31; /* Additional length */ 1099 return 36; 1100 } 1101 1102 buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK; 1103 buf[1] = curlun->removable ? 0x80 : 0; 1104 buf[2] = 2; /* ANSI SCSI level 2 */ 1105 buf[3] = 2; /* SCSI-2 INQUIRY data format */ 1106 buf[4] = 31; /* Additional length */ 1107 buf[5] = 0; /* No special options */ 1108 buf[6] = 0; 1109 buf[7] = 0; 1110 memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string); 1111 return 36; 1112 } 1113 1114 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) 1115 { 1116 struct fsg_lun *curlun = common->curlun; 1117 u8 *buf = (u8 *) bh->buf; 1118 u32 sd, sdinfo; 1119 int valid; 1120 1121 /* 1122 * From the SCSI-2 spec., section 7.9 (Unit attention condition): 1123 * 1124 * If a REQUEST SENSE command is received from an initiator 1125 * with a pending unit attention condition (before the target 1126 * generates the contingent allegiance condition), then the 1127 * target shall either: 1128 * a) report any pending sense data and preserve the unit 1129 * attention condition on the logical unit, or, 1130 * b) report the unit attention condition, may discard any 1131 * pending sense data, and clear the unit attention 1132 * condition on the logical unit for that initiator. 1133 * 1134 * FSG normally uses option a); enable this code to use option b). 1135 */ 1136 #if 0 1137 if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { 1138 curlun->sense_data = curlun->unit_attention_data; 1139 curlun->unit_attention_data = SS_NO_SENSE; 1140 } 1141 #endif 1142 1143 if (!curlun) { /* Unsupported LUNs are okay */ 1144 common->bad_lun_okay = 1; 1145 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1146 sdinfo = 0; 1147 valid = 0; 1148 } else { 1149 sd = curlun->sense_data; 1150 sdinfo = curlun->sense_data_info; 1151 valid = curlun->info_valid << 7; 1152 curlun->sense_data = SS_NO_SENSE; 1153 curlun->sense_data_info = 0; 1154 curlun->info_valid = 0; 1155 } 1156 1157 memset(buf, 0, 18); 1158 buf[0] = valid | 0x70; /* Valid, current error */ 1159 buf[2] = SK(sd); 1160 put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ 1161 buf[7] = 18 - 8; /* Additional sense length */ 1162 buf[12] = ASC(sd); 1163 buf[13] = ASCQ(sd); 1164 return 18; 1165 } 1166 1167 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) 1168 { 1169 struct fsg_lun *curlun = common->curlun; 1170 u32 lba = get_unaligned_be32(&common->cmnd[2]); 1171 int pmi = common->cmnd[8]; 1172 u8 *buf = (u8 *)bh->buf; 1173 1174 /* Check the PMI and LBA fields */ 1175 if (pmi > 1 || (pmi == 0 && lba != 0)) { 1176 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1177 return -EINVAL; 1178 } 1179 1180 put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); 1181 /* Max logical block */ 1182 put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ 1183 return 8; 1184 } 1185 1186 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) 1187 { 1188 struct fsg_lun *curlun = common->curlun; 1189 int msf = common->cmnd[1] & 0x02; 1190 u32 lba = get_unaligned_be32(&common->cmnd[2]); 1191 u8 *buf = (u8 *)bh->buf; 1192 1193 if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ 1194 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1195 return -EINVAL; 1196 } 1197 if (lba >= curlun->num_sectors) { 1198 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1199 return -EINVAL; 1200 } 1201 1202 memset(buf, 0, 8); 1203 buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ 1204 store_cdrom_address(&buf[4], msf, lba); 1205 return 8; 1206 } 1207 1208 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) 1209 { 1210 struct fsg_lun *curlun = common->curlun; 1211 int msf = common->cmnd[1] & 0x02; 1212 int start_track = common->cmnd[6]; 1213 u8 *buf = (u8 *)bh->buf; 1214 1215 if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ 1216 start_track > 1) { 1217 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1218 return -EINVAL; 1219 } 1220 1221 memset(buf, 0, 20); 1222 buf[1] = (20-2); /* TOC data length */ 1223 buf[2] = 1; /* First track number */ 1224 buf[3] = 1; /* Last track number */ 1225 buf[5] = 0x16; /* Data track, copying allowed */ 1226 buf[6] = 0x01; /* Only track is number 1 */ 1227 store_cdrom_address(&buf[8], msf, 0); 1228 1229 buf[13] = 0x16; /* Lead-out track is data */ 1230 buf[14] = 0xAA; /* Lead-out track number */ 1231 store_cdrom_address(&buf[16], msf, curlun->num_sectors); 1232 return 20; 1233 } 1234 1235 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) 1236 { 1237 struct fsg_lun *curlun = common->curlun; 1238 int mscmnd = common->cmnd[0]; 1239 u8 *buf = (u8 *) bh->buf; 1240 u8 *buf0 = buf; 1241 int pc, page_code; 1242 int changeable_values, all_pages; 1243 int valid_page = 0; 1244 int len, limit; 1245 1246 if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ 1247 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1248 return -EINVAL; 1249 } 1250 pc = common->cmnd[2] >> 6; 1251 page_code = common->cmnd[2] & 0x3f; 1252 if (pc == 3) { 1253 curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; 1254 return -EINVAL; 1255 } 1256 changeable_values = (pc == 1); 1257 all_pages = (page_code == 0x3f); 1258 1259 /* 1260 * Write the mode parameter header. Fixed values are: default 1261 * medium type, no cache control (DPOFUA), and no block descriptors. 1262 * The only variable value is the WriteProtect bit. We will fill in 1263 * the mode data length later. 1264 */ 1265 memset(buf, 0, 8); 1266 if (mscmnd == MODE_SENSE) { 1267 buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ 1268 buf += 4; 1269 limit = 255; 1270 } else { /* MODE_SENSE_10 */ 1271 buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ 1272 buf += 8; 1273 limit = 65535; /* Should really be FSG_BUFLEN */ 1274 } 1275 1276 /* No block descriptors */ 1277 1278 /* 1279 * The mode pages, in numerical order. The only page we support 1280 * is the Caching page. 1281 */ 1282 if (page_code == 0x08 || all_pages) { 1283 valid_page = 1; 1284 buf[0] = 0x08; /* Page code */ 1285 buf[1] = 10; /* Page length */ 1286 memset(buf+2, 0, 10); /* None of the fields are changeable */ 1287 1288 if (!changeable_values) { 1289 buf[2] = 0x04; /* Write cache enable, */ 1290 /* Read cache not disabled */ 1291 /* No cache retention priorities */ 1292 put_unaligned_be16(0xffff, &buf[4]); 1293 /* Don't disable prefetch */ 1294 /* Minimum prefetch = 0 */ 1295 put_unaligned_be16(0xffff, &buf[8]); 1296 /* Maximum prefetch */ 1297 put_unaligned_be16(0xffff, &buf[10]); 1298 /* Maximum prefetch ceiling */ 1299 } 1300 buf += 12; 1301 } 1302 1303 /* 1304 * Check that a valid page was requested and the mode data length 1305 * isn't too long. 1306 */ 1307 len = buf - buf0; 1308 if (!valid_page || len > limit) { 1309 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1310 return -EINVAL; 1311 } 1312 1313 /* Store the mode data length */ 1314 if (mscmnd == MODE_SENSE) 1315 buf0[0] = len - 1; 1316 else 1317 put_unaligned_be16(len - 2, buf0); 1318 return len; 1319 } 1320 1321 static int do_start_stop(struct fsg_common *common) 1322 { 1323 struct fsg_lun *curlun = common->curlun; 1324 int loej, start; 1325 1326 if (!curlun) { 1327 return -EINVAL; 1328 } else if (!curlun->removable) { 1329 curlun->sense_data = SS_INVALID_COMMAND; 1330 return -EINVAL; 1331 } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ 1332 (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ 1333 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1334 return -EINVAL; 1335 } 1336 1337 loej = common->cmnd[4] & 0x02; 1338 start = common->cmnd[4] & 0x01; 1339 1340 /* 1341 * Our emulation doesn't support mounting; the medium is 1342 * available for use as soon as it is loaded. 1343 */ 1344 if (start) { 1345 if (!fsg_lun_is_open(curlun)) { 1346 curlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1347 return -EINVAL; 1348 } 1349 return 0; 1350 } 1351 1352 /* Are we allowed to unload the media? */ 1353 if (curlun->prevent_medium_removal) { 1354 LDBG(curlun, "unload attempt prevented\n"); 1355 curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; 1356 return -EINVAL; 1357 } 1358 1359 if (!loej) 1360 return 0; 1361 1362 up_read(&common->filesem); 1363 down_write(&common->filesem); 1364 fsg_lun_close(curlun); 1365 up_write(&common->filesem); 1366 down_read(&common->filesem); 1367 1368 return 0; 1369 } 1370 1371 static int do_prevent_allow(struct fsg_common *common) 1372 { 1373 struct fsg_lun *curlun = common->curlun; 1374 int prevent; 1375 1376 if (!common->curlun) { 1377 return -EINVAL; 1378 } else if (!common->curlun->removable) { 1379 common->curlun->sense_data = SS_INVALID_COMMAND; 1380 return -EINVAL; 1381 } 1382 1383 prevent = common->cmnd[4] & 0x01; 1384 if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ 1385 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1386 return -EINVAL; 1387 } 1388 1389 if (curlun->prevent_medium_removal && !prevent) 1390 fsg_lun_fsync_sub(curlun); 1391 curlun->prevent_medium_removal = prevent; 1392 return 0; 1393 } 1394 1395 static int do_read_format_capacities(struct fsg_common *common, 1396 struct fsg_buffhd *bh) 1397 { 1398 struct fsg_lun *curlun = common->curlun; 1399 u8 *buf = (u8 *) bh->buf; 1400 1401 buf[0] = buf[1] = buf[2] = 0; 1402 buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ 1403 buf += 4; 1404 1405 put_unaligned_be32(curlun->num_sectors, &buf[0]); 1406 /* Number of blocks */ 1407 put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ 1408 buf[4] = 0x02; /* Current capacity */ 1409 return 12; 1410 } 1411 1412 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) 1413 { 1414 struct fsg_lun *curlun = common->curlun; 1415 1416 /* We don't support MODE SELECT */ 1417 if (curlun) 1418 curlun->sense_data = SS_INVALID_COMMAND; 1419 return -EINVAL; 1420 } 1421 1422 1423 /*-------------------------------------------------------------------------*/ 1424 1425 static int halt_bulk_in_endpoint(struct fsg_dev *fsg) 1426 { 1427 int rc; 1428 1429 rc = fsg_set_halt(fsg, fsg->bulk_in); 1430 if (rc == -EAGAIN) 1431 VDBG(fsg, "delayed bulk-in endpoint halt\n"); 1432 while (rc != 0) { 1433 if (rc != -EAGAIN) { 1434 WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); 1435 rc = 0; 1436 break; 1437 } 1438 1439 /* Wait for a short time and then try again */ 1440 if (msleep_interruptible(100) != 0) 1441 return -EINTR; 1442 rc = usb_ep_set_halt(fsg->bulk_in); 1443 } 1444 return rc; 1445 } 1446 1447 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) 1448 { 1449 int rc; 1450 1451 DBG(fsg, "bulk-in set wedge\n"); 1452 rc = usb_ep_set_wedge(fsg->bulk_in); 1453 if (rc == -EAGAIN) 1454 VDBG(fsg, "delayed bulk-in endpoint wedge\n"); 1455 while (rc != 0) { 1456 if (rc != -EAGAIN) { 1457 WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); 1458 rc = 0; 1459 break; 1460 } 1461 1462 /* Wait for a short time and then try again */ 1463 if (msleep_interruptible(100) != 0) 1464 return -EINTR; 1465 rc = usb_ep_set_wedge(fsg->bulk_in); 1466 } 1467 return rc; 1468 } 1469 1470 static int throw_away_data(struct fsg_common *common) 1471 { 1472 struct fsg_buffhd *bh; 1473 u32 amount; 1474 int rc; 1475 1476 for (bh = common->next_buffhd_to_drain; 1477 bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; 1478 bh = common->next_buffhd_to_drain) { 1479 1480 /* Throw away the data in a filled buffer */ 1481 if (bh->state == BUF_STATE_FULL) { 1482 smp_rmb(); 1483 bh->state = BUF_STATE_EMPTY; 1484 common->next_buffhd_to_drain = bh->next; 1485 1486 /* A short packet or an error ends everything */ 1487 if (bh->outreq->actual < bh->bulk_out_intended_length || 1488 bh->outreq->status != 0) { 1489 raise_exception(common, 1490 FSG_STATE_ABORT_BULK_OUT); 1491 return -EINTR; 1492 } 1493 continue; 1494 } 1495 1496 /* Try to submit another request if we need one */ 1497 bh = common->next_buffhd_to_fill; 1498 if (bh->state == BUF_STATE_EMPTY 1499 && common->usb_amount_left > 0) { 1500 amount = min(common->usb_amount_left, FSG_BUFLEN); 1501 1502 /* 1503 * Except at the end of the transfer, amount will be 1504 * equal to the buffer size, which is divisible by 1505 * the bulk-out maxpacket size. 1506 */ 1507 set_bulk_out_req_length(common, bh, amount); 1508 if (!start_out_transfer(common, bh)) 1509 /* Dunno what to do if common->fsg is NULL */ 1510 return -EIO; 1511 common->next_buffhd_to_fill = bh->next; 1512 common->usb_amount_left -= amount; 1513 continue; 1514 } 1515 1516 /* Otherwise wait for something to happen */ 1517 rc = sleep_thread(common, true); 1518 if (rc) 1519 return rc; 1520 } 1521 return 0; 1522 } 1523 1524 static int finish_reply(struct fsg_common *common) 1525 { 1526 struct fsg_buffhd *bh = common->next_buffhd_to_fill; 1527 int rc = 0; 1528 1529 switch (common->data_dir) { 1530 case DATA_DIR_NONE: 1531 break; /* Nothing to send */ 1532 1533 /* 1534 * If we don't know whether the host wants to read or write, 1535 * this must be CB or CBI with an unknown command. We mustn't 1536 * try to send or receive any data. So stall both bulk pipes 1537 * if we can and wait for a reset. 1538 */ 1539 case DATA_DIR_UNKNOWN: 1540 if (!common->can_stall) { 1541 /* Nothing */ 1542 } else if (fsg_is_set(common)) { 1543 fsg_set_halt(common->fsg, common->fsg->bulk_out); 1544 rc = halt_bulk_in_endpoint(common->fsg); 1545 } else { 1546 /* Don't know what to do if common->fsg is NULL */ 1547 rc = -EIO; 1548 } 1549 break; 1550 1551 /* All but the last buffer of data must have already been sent */ 1552 case DATA_DIR_TO_HOST: 1553 if (common->data_size == 0) { 1554 /* Nothing to send */ 1555 1556 /* Don't know what to do if common->fsg is NULL */ 1557 } else if (!fsg_is_set(common)) { 1558 rc = -EIO; 1559 1560 /* If there's no residue, simply send the last buffer */ 1561 } else if (common->residue == 0) { 1562 bh->inreq->zero = 0; 1563 if (!start_in_transfer(common, bh)) 1564 return -EIO; 1565 common->next_buffhd_to_fill = bh->next; 1566 1567 /* 1568 * For Bulk-only, mark the end of the data with a short 1569 * packet. If we are allowed to stall, halt the bulk-in 1570 * endpoint. (Note: This violates the Bulk-Only Transport 1571 * specification, which requires us to pad the data if we 1572 * don't halt the endpoint. Presumably nobody will mind.) 1573 */ 1574 } else { 1575 bh->inreq->zero = 1; 1576 if (!start_in_transfer(common, bh)) 1577 rc = -EIO; 1578 common->next_buffhd_to_fill = bh->next; 1579 if (common->can_stall) 1580 rc = halt_bulk_in_endpoint(common->fsg); 1581 } 1582 break; 1583 1584 /* 1585 * We have processed all we want from the data the host has sent. 1586 * There may still be outstanding bulk-out requests. 1587 */ 1588 case DATA_DIR_FROM_HOST: 1589 if (common->residue == 0) { 1590 /* Nothing to receive */ 1591 1592 /* Did the host stop sending unexpectedly early? */ 1593 } else if (common->short_packet_received) { 1594 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1595 rc = -EINTR; 1596 1597 /* 1598 * We haven't processed all the incoming data. Even though 1599 * we may be allowed to stall, doing so would cause a race. 1600 * The controller may already have ACK'ed all the remaining 1601 * bulk-out packets, in which case the host wouldn't see a 1602 * STALL. Not realizing the endpoint was halted, it wouldn't 1603 * clear the halt -- leading to problems later on. 1604 */ 1605 #if 0 1606 } else if (common->can_stall) { 1607 if (fsg_is_set(common)) 1608 fsg_set_halt(common->fsg, 1609 common->fsg->bulk_out); 1610 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1611 rc = -EINTR; 1612 #endif 1613 1614 /* 1615 * We can't stall. Read in the excess data and throw it 1616 * all away. 1617 */ 1618 } else { 1619 rc = throw_away_data(common); 1620 } 1621 break; 1622 } 1623 return rc; 1624 } 1625 1626 static int send_status(struct fsg_common *common) 1627 { 1628 struct fsg_lun *curlun = common->curlun; 1629 struct fsg_buffhd *bh; 1630 struct bulk_cs_wrap *csw; 1631 int rc; 1632 u8 status = US_BULK_STAT_OK; 1633 u32 sd, sdinfo = 0; 1634 1635 /* Wait for the next buffer to become available */ 1636 bh = common->next_buffhd_to_fill; 1637 while (bh->state != BUF_STATE_EMPTY) { 1638 rc = sleep_thread(common, true); 1639 if (rc) 1640 return rc; 1641 } 1642 1643 if (curlun) { 1644 sd = curlun->sense_data; 1645 sdinfo = curlun->sense_data_info; 1646 } else if (common->bad_lun_okay) 1647 sd = SS_NO_SENSE; 1648 else 1649 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1650 1651 if (common->phase_error) { 1652 DBG(common, "sending phase-error status\n"); 1653 status = US_BULK_STAT_PHASE; 1654 sd = SS_INVALID_COMMAND; 1655 } else if (sd != SS_NO_SENSE) { 1656 DBG(common, "sending command-failure status\n"); 1657 status = US_BULK_STAT_FAIL; 1658 VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" 1659 " info x%x\n", 1660 SK(sd), ASC(sd), ASCQ(sd), sdinfo); 1661 } 1662 1663 /* Store and send the Bulk-only CSW */ 1664 csw = (void *)bh->buf; 1665 1666 csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); 1667 csw->Tag = common->tag; 1668 csw->Residue = cpu_to_le32(common->residue); 1669 csw->Status = status; 1670 1671 bh->inreq->length = US_BULK_CS_WRAP_LEN; 1672 bh->inreq->zero = 0; 1673 if (!start_in_transfer(common, bh)) 1674 /* Don't know what to do if common->fsg is NULL */ 1675 return -EIO; 1676 1677 common->next_buffhd_to_fill = bh->next; 1678 return 0; 1679 } 1680 1681 1682 /*-------------------------------------------------------------------------*/ 1683 1684 /* 1685 * Check whether the command is properly formed and whether its data size 1686 * and direction agree with the values we already have. 1687 */ 1688 static int check_command(struct fsg_common *common, int cmnd_size, 1689 enum data_direction data_dir, unsigned int mask, 1690 int needs_medium, const char *name) 1691 { 1692 int i; 1693 unsigned int lun = common->cmnd[1] >> 5; 1694 static const char dirletter[4] = {'u', 'o', 'i', 'n'}; 1695 char hdlen[20]; 1696 struct fsg_lun *curlun; 1697 1698 hdlen[0] = 0; 1699 if (common->data_dir != DATA_DIR_UNKNOWN) 1700 sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], 1701 common->data_size); 1702 VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", 1703 name, cmnd_size, dirletter[(int) data_dir], 1704 common->data_size_from_cmnd, common->cmnd_size, hdlen); 1705 1706 /* 1707 * We can't reply at all until we know the correct data direction 1708 * and size. 1709 */ 1710 if (common->data_size_from_cmnd == 0) 1711 data_dir = DATA_DIR_NONE; 1712 if (common->data_size < common->data_size_from_cmnd) { 1713 /* 1714 * Host data size < Device data size is a phase error. 1715 * Carry out the command, but only transfer as much as 1716 * we are allowed. 1717 */ 1718 common->data_size_from_cmnd = common->data_size; 1719 common->phase_error = 1; 1720 } 1721 common->residue = common->data_size; 1722 common->usb_amount_left = common->data_size; 1723 1724 /* Conflicting data directions is a phase error */ 1725 if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) { 1726 common->phase_error = 1; 1727 return -EINVAL; 1728 } 1729 1730 /* Verify the length of the command itself */ 1731 if (cmnd_size != common->cmnd_size) { 1732 1733 /* 1734 * Special case workaround: There are plenty of buggy SCSI 1735 * implementations. Many have issues with cbw->Length 1736 * field passing a wrong command size. For those cases we 1737 * always try to work around the problem by using the length 1738 * sent by the host side provided it is at least as large 1739 * as the correct command length. 1740 * Examples of such cases would be MS-Windows, which issues 1741 * REQUEST SENSE with cbw->Length == 12 where it should 1742 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and 1743 * REQUEST SENSE with cbw->Length == 10 where it should 1744 * be 6 as well. 1745 */ 1746 if (cmnd_size <= common->cmnd_size) { 1747 DBG(common, "%s is buggy! Expected length %d " 1748 "but we got %d\n", name, 1749 cmnd_size, common->cmnd_size); 1750 cmnd_size = common->cmnd_size; 1751 } else { 1752 common->phase_error = 1; 1753 return -EINVAL; 1754 } 1755 } 1756 1757 /* Check that the LUN values are consistent */ 1758 if (common->lun != lun) 1759 DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n", 1760 common->lun, lun); 1761 1762 /* Check the LUN */ 1763 curlun = common->curlun; 1764 if (curlun) { 1765 if (common->cmnd[0] != REQUEST_SENSE) { 1766 curlun->sense_data = SS_NO_SENSE; 1767 curlun->sense_data_info = 0; 1768 curlun->info_valid = 0; 1769 } 1770 } else { 1771 common->bad_lun_okay = 0; 1772 1773 /* 1774 * INQUIRY and REQUEST SENSE commands are explicitly allowed 1775 * to use unsupported LUNs; all others may not. 1776 */ 1777 if (common->cmnd[0] != INQUIRY && 1778 common->cmnd[0] != REQUEST_SENSE) { 1779 DBG(common, "unsupported LUN %u\n", common->lun); 1780 return -EINVAL; 1781 } 1782 } 1783 1784 /* 1785 * If a unit attention condition exists, only INQUIRY and 1786 * REQUEST SENSE commands are allowed; anything else must fail. 1787 */ 1788 if (curlun && curlun->unit_attention_data != SS_NO_SENSE && 1789 common->cmnd[0] != INQUIRY && 1790 common->cmnd[0] != REQUEST_SENSE) { 1791 curlun->sense_data = curlun->unit_attention_data; 1792 curlun->unit_attention_data = SS_NO_SENSE; 1793 return -EINVAL; 1794 } 1795 1796 /* Check that only command bytes listed in the mask are non-zero */ 1797 common->cmnd[1] &= 0x1f; /* Mask away the LUN */ 1798 for (i = 1; i < cmnd_size; ++i) { 1799 if (common->cmnd[i] && !(mask & (1 << i))) { 1800 if (curlun) 1801 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1802 return -EINVAL; 1803 } 1804 } 1805 1806 /* If the medium isn't mounted and the command needs to access 1807 * it, return an error. */ 1808 if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { 1809 curlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1810 return -EINVAL; 1811 } 1812 1813 return 0; 1814 } 1815 1816 /* wrapper of check_command for data size in blocks handling */ 1817 static int check_command_size_in_blocks(struct fsg_common *common, 1818 int cmnd_size, enum data_direction data_dir, 1819 unsigned int mask, int needs_medium, const char *name) 1820 { 1821 if (common->curlun) 1822 common->data_size_from_cmnd <<= common->curlun->blkbits; 1823 return check_command(common, cmnd_size, data_dir, 1824 mask, needs_medium, name); 1825 } 1826 1827 static int do_scsi_command(struct fsg_common *common) 1828 { 1829 struct fsg_buffhd *bh; 1830 int rc; 1831 int reply = -EINVAL; 1832 int i; 1833 static char unknown[16]; 1834 1835 dump_cdb(common); 1836 1837 /* Wait for the next buffer to become available for data or status */ 1838 bh = common->next_buffhd_to_fill; 1839 common->next_buffhd_to_drain = bh; 1840 while (bh->state != BUF_STATE_EMPTY) { 1841 rc = sleep_thread(common, true); 1842 if (rc) 1843 return rc; 1844 } 1845 common->phase_error = 0; 1846 common->short_packet_received = 0; 1847 1848 down_read(&common->filesem); /* We're using the backing file */ 1849 switch (common->cmnd[0]) { 1850 1851 case INQUIRY: 1852 common->data_size_from_cmnd = common->cmnd[4]; 1853 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1854 (1<<4), 0, 1855 "INQUIRY"); 1856 if (reply == 0) 1857 reply = do_inquiry(common, bh); 1858 break; 1859 1860 case MODE_SELECT: 1861 common->data_size_from_cmnd = common->cmnd[4]; 1862 reply = check_command(common, 6, DATA_DIR_FROM_HOST, 1863 (1<<1) | (1<<4), 0, 1864 "MODE SELECT(6)"); 1865 if (reply == 0) 1866 reply = do_mode_select(common, bh); 1867 break; 1868 1869 case MODE_SELECT_10: 1870 common->data_size_from_cmnd = 1871 get_unaligned_be16(&common->cmnd[7]); 1872 reply = check_command(common, 10, DATA_DIR_FROM_HOST, 1873 (1<<1) | (3<<7), 0, 1874 "MODE SELECT(10)"); 1875 if (reply == 0) 1876 reply = do_mode_select(common, bh); 1877 break; 1878 1879 case MODE_SENSE: 1880 common->data_size_from_cmnd = common->cmnd[4]; 1881 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1882 (1<<1) | (1<<2) | (1<<4), 0, 1883 "MODE SENSE(6)"); 1884 if (reply == 0) 1885 reply = do_mode_sense(common, bh); 1886 break; 1887 1888 case MODE_SENSE_10: 1889 common->data_size_from_cmnd = 1890 get_unaligned_be16(&common->cmnd[7]); 1891 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1892 (1<<1) | (1<<2) | (3<<7), 0, 1893 "MODE SENSE(10)"); 1894 if (reply == 0) 1895 reply = do_mode_sense(common, bh); 1896 break; 1897 1898 case ALLOW_MEDIUM_REMOVAL: 1899 common->data_size_from_cmnd = 0; 1900 reply = check_command(common, 6, DATA_DIR_NONE, 1901 (1<<4), 0, 1902 "PREVENT-ALLOW MEDIUM REMOVAL"); 1903 if (reply == 0) 1904 reply = do_prevent_allow(common); 1905 break; 1906 1907 case READ_6: 1908 i = common->cmnd[4]; 1909 common->data_size_from_cmnd = (i == 0) ? 256 : i; 1910 reply = check_command_size_in_blocks(common, 6, 1911 DATA_DIR_TO_HOST, 1912 (7<<1) | (1<<4), 1, 1913 "READ(6)"); 1914 if (reply == 0) 1915 reply = do_read(common); 1916 break; 1917 1918 case READ_10: 1919 common->data_size_from_cmnd = 1920 get_unaligned_be16(&common->cmnd[7]); 1921 reply = check_command_size_in_blocks(common, 10, 1922 DATA_DIR_TO_HOST, 1923 (1<<1) | (0xf<<2) | (3<<7), 1, 1924 "READ(10)"); 1925 if (reply == 0) 1926 reply = do_read(common); 1927 break; 1928 1929 case READ_12: 1930 common->data_size_from_cmnd = 1931 get_unaligned_be32(&common->cmnd[6]); 1932 reply = check_command_size_in_blocks(common, 12, 1933 DATA_DIR_TO_HOST, 1934 (1<<1) | (0xf<<2) | (0xf<<6), 1, 1935 "READ(12)"); 1936 if (reply == 0) 1937 reply = do_read(common); 1938 break; 1939 1940 case READ_CAPACITY: 1941 common->data_size_from_cmnd = 8; 1942 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1943 (0xf<<2) | (1<<8), 1, 1944 "READ CAPACITY"); 1945 if (reply == 0) 1946 reply = do_read_capacity(common, bh); 1947 break; 1948 1949 case READ_HEADER: 1950 if (!common->curlun || !common->curlun->cdrom) 1951 goto unknown_cmnd; 1952 common->data_size_from_cmnd = 1953 get_unaligned_be16(&common->cmnd[7]); 1954 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1955 (3<<7) | (0x1f<<1), 1, 1956 "READ HEADER"); 1957 if (reply == 0) 1958 reply = do_read_header(common, bh); 1959 break; 1960 1961 case READ_TOC: 1962 if (!common->curlun || !common->curlun->cdrom) 1963 goto unknown_cmnd; 1964 common->data_size_from_cmnd = 1965 get_unaligned_be16(&common->cmnd[7]); 1966 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1967 (7<<6) | (1<<1), 1, 1968 "READ TOC"); 1969 if (reply == 0) 1970 reply = do_read_toc(common, bh); 1971 break; 1972 1973 case READ_FORMAT_CAPACITIES: 1974 common->data_size_from_cmnd = 1975 get_unaligned_be16(&common->cmnd[7]); 1976 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1977 (3<<7), 1, 1978 "READ FORMAT CAPACITIES"); 1979 if (reply == 0) 1980 reply = do_read_format_capacities(common, bh); 1981 break; 1982 1983 case REQUEST_SENSE: 1984 common->data_size_from_cmnd = common->cmnd[4]; 1985 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1986 (1<<4), 0, 1987 "REQUEST SENSE"); 1988 if (reply == 0) 1989 reply = do_request_sense(common, bh); 1990 break; 1991 1992 case START_STOP: 1993 common->data_size_from_cmnd = 0; 1994 reply = check_command(common, 6, DATA_DIR_NONE, 1995 (1<<1) | (1<<4), 0, 1996 "START-STOP UNIT"); 1997 if (reply == 0) 1998 reply = do_start_stop(common); 1999 break; 2000 2001 case SYNCHRONIZE_CACHE: 2002 common->data_size_from_cmnd = 0; 2003 reply = check_command(common, 10, DATA_DIR_NONE, 2004 (0xf<<2) | (3<<7), 1, 2005 "SYNCHRONIZE CACHE"); 2006 if (reply == 0) 2007 reply = do_synchronize_cache(common); 2008 break; 2009 2010 case TEST_UNIT_READY: 2011 common->data_size_from_cmnd = 0; 2012 reply = check_command(common, 6, DATA_DIR_NONE, 2013 0, 1, 2014 "TEST UNIT READY"); 2015 break; 2016 2017 /* 2018 * Although optional, this command is used by MS-Windows. We 2019 * support a minimal version: BytChk must be 0. 2020 */ 2021 case VERIFY: 2022 common->data_size_from_cmnd = 0; 2023 reply = check_command(common, 10, DATA_DIR_NONE, 2024 (1<<1) | (0xf<<2) | (3<<7), 1, 2025 "VERIFY"); 2026 if (reply == 0) 2027 reply = do_verify(common); 2028 break; 2029 2030 case WRITE_6: 2031 i = common->cmnd[4]; 2032 common->data_size_from_cmnd = (i == 0) ? 256 : i; 2033 reply = check_command_size_in_blocks(common, 6, 2034 DATA_DIR_FROM_HOST, 2035 (7<<1) | (1<<4), 1, 2036 "WRITE(6)"); 2037 if (reply == 0) 2038 reply = do_write(common); 2039 break; 2040 2041 case WRITE_10: 2042 common->data_size_from_cmnd = 2043 get_unaligned_be16(&common->cmnd[7]); 2044 reply = check_command_size_in_blocks(common, 10, 2045 DATA_DIR_FROM_HOST, 2046 (1<<1) | (0xf<<2) | (3<<7), 1, 2047 "WRITE(10)"); 2048 if (reply == 0) 2049 reply = do_write(common); 2050 break; 2051 2052 case WRITE_12: 2053 common->data_size_from_cmnd = 2054 get_unaligned_be32(&common->cmnd[6]); 2055 reply = check_command_size_in_blocks(common, 12, 2056 DATA_DIR_FROM_HOST, 2057 (1<<1) | (0xf<<2) | (0xf<<6), 1, 2058 "WRITE(12)"); 2059 if (reply == 0) 2060 reply = do_write(common); 2061 break; 2062 2063 /* 2064 * Some mandatory commands that we recognize but don't implement. 2065 * They don't mean much in this setting. It's left as an exercise 2066 * for anyone interested to implement RESERVE and RELEASE in terms 2067 * of Posix locks. 2068 */ 2069 case FORMAT_UNIT: 2070 case RELEASE: 2071 case RESERVE: 2072 case SEND_DIAGNOSTIC: 2073 /* Fall through */ 2074 2075 default: 2076 unknown_cmnd: 2077 common->data_size_from_cmnd = 0; 2078 sprintf(unknown, "Unknown x%02x", common->cmnd[0]); 2079 reply = check_command(common, common->cmnd_size, 2080 DATA_DIR_UNKNOWN, ~0, 0, unknown); 2081 if (reply == 0) { 2082 common->curlun->sense_data = SS_INVALID_COMMAND; 2083 reply = -EINVAL; 2084 } 2085 break; 2086 } 2087 up_read(&common->filesem); 2088 2089 if (reply == -EINTR || signal_pending(current)) 2090 return -EINTR; 2091 2092 /* Set up the single reply buffer for finish_reply() */ 2093 if (reply == -EINVAL) 2094 reply = 0; /* Error reply length */ 2095 if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { 2096 reply = min((u32)reply, common->data_size_from_cmnd); 2097 bh->inreq->length = reply; 2098 bh->state = BUF_STATE_FULL; 2099 common->residue -= reply; 2100 } /* Otherwise it's already set */ 2101 2102 return 0; 2103 } 2104 2105 2106 /*-------------------------------------------------------------------------*/ 2107 2108 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) 2109 { 2110 struct usb_request *req = bh->outreq; 2111 struct bulk_cb_wrap *cbw = req->buf; 2112 struct fsg_common *common = fsg->common; 2113 2114 /* Was this a real packet? Should it be ignored? */ 2115 if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) 2116 return -EINVAL; 2117 2118 /* Is the CBW valid? */ 2119 if (req->actual != US_BULK_CB_WRAP_LEN || 2120 cbw->Signature != cpu_to_le32( 2121 US_BULK_CB_SIGN)) { 2122 DBG(fsg, "invalid CBW: len %u sig 0x%x\n", 2123 req->actual, 2124 le32_to_cpu(cbw->Signature)); 2125 2126 /* 2127 * The Bulk-only spec says we MUST stall the IN endpoint 2128 * (6.6.1), so it's unavoidable. It also says we must 2129 * retain this state until the next reset, but there's 2130 * no way to tell the controller driver it should ignore 2131 * Clear-Feature(HALT) requests. 2132 * 2133 * We aren't required to halt the OUT endpoint; instead 2134 * we can simply accept and discard any data received 2135 * until the next reset. 2136 */ 2137 wedge_bulk_in_endpoint(fsg); 2138 set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); 2139 return -EINVAL; 2140 } 2141 2142 /* Is the CBW meaningful? */ 2143 if (cbw->Lun >= ARRAY_SIZE(common->luns) || 2144 cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 || 2145 cbw->Length > MAX_COMMAND_SIZE) { 2146 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " 2147 "cmdlen %u\n", 2148 cbw->Lun, cbw->Flags, cbw->Length); 2149 2150 /* 2151 * We can do anything we want here, so let's stall the 2152 * bulk pipes if we are allowed to. 2153 */ 2154 if (common->can_stall) { 2155 fsg_set_halt(fsg, fsg->bulk_out); 2156 halt_bulk_in_endpoint(fsg); 2157 } 2158 return -EINVAL; 2159 } 2160 2161 /* Save the command for later */ 2162 common->cmnd_size = cbw->Length; 2163 memcpy(common->cmnd, cbw->CDB, common->cmnd_size); 2164 if (cbw->Flags & US_BULK_FLAG_IN) 2165 common->data_dir = DATA_DIR_TO_HOST; 2166 else 2167 common->data_dir = DATA_DIR_FROM_HOST; 2168 common->data_size = le32_to_cpu(cbw->DataTransferLength); 2169 if (common->data_size == 0) 2170 common->data_dir = DATA_DIR_NONE; 2171 common->lun = cbw->Lun; 2172 if (common->lun < ARRAY_SIZE(common->luns)) 2173 common->curlun = common->luns[common->lun]; 2174 else 2175 common->curlun = NULL; 2176 common->tag = cbw->Tag; 2177 return 0; 2178 } 2179 2180 static int get_next_command(struct fsg_common *common) 2181 { 2182 struct fsg_buffhd *bh; 2183 int rc = 0; 2184 2185 /* Wait for the next buffer to become available */ 2186 bh = common->next_buffhd_to_fill; 2187 while (bh->state != BUF_STATE_EMPTY) { 2188 rc = sleep_thread(common, true); 2189 if (rc) 2190 return rc; 2191 } 2192 2193 /* Queue a request to read a Bulk-only CBW */ 2194 set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN); 2195 if (!start_out_transfer(common, bh)) 2196 /* Don't know what to do if common->fsg is NULL */ 2197 return -EIO; 2198 2199 /* 2200 * We will drain the buffer in software, which means we 2201 * can reuse it for the next filling. No need to advance 2202 * next_buffhd_to_fill. 2203 */ 2204 2205 /* Wait for the CBW to arrive */ 2206 while (bh->state != BUF_STATE_FULL) { 2207 rc = sleep_thread(common, true); 2208 if (rc) 2209 return rc; 2210 } 2211 smp_rmb(); 2212 rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; 2213 bh->state = BUF_STATE_EMPTY; 2214 2215 return rc; 2216 } 2217 2218 2219 /*-------------------------------------------------------------------------*/ 2220 2221 static int alloc_request(struct fsg_common *common, struct usb_ep *ep, 2222 struct usb_request **preq) 2223 { 2224 *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); 2225 if (*preq) 2226 return 0; 2227 ERROR(common, "can't allocate request for %s\n", ep->name); 2228 return -ENOMEM; 2229 } 2230 2231 /* Reset interface setting and re-init endpoint state (toggle etc). */ 2232 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) 2233 { 2234 struct fsg_dev *fsg; 2235 int i, rc = 0; 2236 2237 if (common->running) 2238 DBG(common, "reset interface\n"); 2239 2240 reset: 2241 /* Deallocate the requests */ 2242 if (common->fsg) { 2243 fsg = common->fsg; 2244 2245 for (i = 0; i < common->fsg_num_buffers; ++i) { 2246 struct fsg_buffhd *bh = &common->buffhds[i]; 2247 2248 if (bh->inreq) { 2249 usb_ep_free_request(fsg->bulk_in, bh->inreq); 2250 bh->inreq = NULL; 2251 } 2252 if (bh->outreq) { 2253 usb_ep_free_request(fsg->bulk_out, bh->outreq); 2254 bh->outreq = NULL; 2255 } 2256 } 2257 2258 /* Disable the endpoints */ 2259 if (fsg->bulk_in_enabled) { 2260 usb_ep_disable(fsg->bulk_in); 2261 fsg->bulk_in_enabled = 0; 2262 } 2263 if (fsg->bulk_out_enabled) { 2264 usb_ep_disable(fsg->bulk_out); 2265 fsg->bulk_out_enabled = 0; 2266 } 2267 2268 common->fsg = NULL; 2269 wake_up(&common->fsg_wait); 2270 } 2271 2272 common->running = 0; 2273 if (!new_fsg || rc) 2274 return rc; 2275 2276 common->fsg = new_fsg; 2277 fsg = common->fsg; 2278 2279 /* Enable the endpoints */ 2280 rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in); 2281 if (rc) 2282 goto reset; 2283 rc = usb_ep_enable(fsg->bulk_in); 2284 if (rc) 2285 goto reset; 2286 fsg->bulk_in->driver_data = common; 2287 fsg->bulk_in_enabled = 1; 2288 2289 rc = config_ep_by_speed(common->gadget, &(fsg->function), 2290 fsg->bulk_out); 2291 if (rc) 2292 goto reset; 2293 rc = usb_ep_enable(fsg->bulk_out); 2294 if (rc) 2295 goto reset; 2296 fsg->bulk_out->driver_data = common; 2297 fsg->bulk_out_enabled = 1; 2298 common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); 2299 clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); 2300 2301 /* Allocate the requests */ 2302 for (i = 0; i < common->fsg_num_buffers; ++i) { 2303 struct fsg_buffhd *bh = &common->buffhds[i]; 2304 2305 rc = alloc_request(common, fsg->bulk_in, &bh->inreq); 2306 if (rc) 2307 goto reset; 2308 rc = alloc_request(common, fsg->bulk_out, &bh->outreq); 2309 if (rc) 2310 goto reset; 2311 bh->inreq->buf = bh->outreq->buf = bh->buf; 2312 bh->inreq->context = bh->outreq->context = bh; 2313 bh->inreq->complete = bulk_in_complete; 2314 bh->outreq->complete = bulk_out_complete; 2315 } 2316 2317 common->running = 1; 2318 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) 2319 if (common->luns[i]) 2320 common->luns[i]->unit_attention_data = 2321 SS_RESET_OCCURRED; 2322 return rc; 2323 } 2324 2325 2326 /****************************** ALT CONFIGS ******************************/ 2327 2328 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) 2329 { 2330 struct fsg_dev *fsg = fsg_from_func(f); 2331 fsg->common->new_fsg = fsg; 2332 raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); 2333 return USB_GADGET_DELAYED_STATUS; 2334 } 2335 2336 static void fsg_disable(struct usb_function *f) 2337 { 2338 struct fsg_dev *fsg = fsg_from_func(f); 2339 fsg->common->new_fsg = NULL; 2340 raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); 2341 } 2342 2343 2344 /*-------------------------------------------------------------------------*/ 2345 2346 static void handle_exception(struct fsg_common *common) 2347 { 2348 int i; 2349 struct fsg_buffhd *bh; 2350 enum fsg_state old_state; 2351 struct fsg_lun *curlun; 2352 unsigned int exception_req_tag; 2353 2354 /* 2355 * Clear the existing signals. Anything but SIGUSR1 is converted 2356 * into a high-priority EXIT exception. 2357 */ 2358 for (;;) { 2359 int sig = kernel_dequeue_signal(NULL); 2360 if (!sig) 2361 break; 2362 if (sig != SIGUSR1) { 2363 if (common->state < FSG_STATE_EXIT) 2364 DBG(common, "Main thread exiting on signal\n"); 2365 raise_exception(common, FSG_STATE_EXIT); 2366 } 2367 } 2368 2369 /* Cancel all the pending transfers */ 2370 if (likely(common->fsg)) { 2371 for (i = 0; i < common->fsg_num_buffers; ++i) { 2372 bh = &common->buffhds[i]; 2373 if (bh->inreq_busy) 2374 usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); 2375 if (bh->outreq_busy) 2376 usb_ep_dequeue(common->fsg->bulk_out, 2377 bh->outreq); 2378 } 2379 2380 /* Wait until everything is idle */ 2381 for (;;) { 2382 int num_active = 0; 2383 for (i = 0; i < common->fsg_num_buffers; ++i) { 2384 bh = &common->buffhds[i]; 2385 num_active += bh->inreq_busy + bh->outreq_busy; 2386 } 2387 if (num_active == 0) 2388 break; 2389 if (sleep_thread(common, true)) 2390 return; 2391 } 2392 2393 /* Clear out the controller's fifos */ 2394 if (common->fsg->bulk_in_enabled) 2395 usb_ep_fifo_flush(common->fsg->bulk_in); 2396 if (common->fsg->bulk_out_enabled) 2397 usb_ep_fifo_flush(common->fsg->bulk_out); 2398 } 2399 2400 /* 2401 * Reset the I/O buffer states and pointers, the SCSI 2402 * state, and the exception. Then invoke the handler. 2403 */ 2404 spin_lock_irq(&common->lock); 2405 2406 for (i = 0; i < common->fsg_num_buffers; ++i) { 2407 bh = &common->buffhds[i]; 2408 bh->state = BUF_STATE_EMPTY; 2409 } 2410 common->next_buffhd_to_fill = &common->buffhds[0]; 2411 common->next_buffhd_to_drain = &common->buffhds[0]; 2412 exception_req_tag = common->exception_req_tag; 2413 old_state = common->state; 2414 2415 if (old_state == FSG_STATE_ABORT_BULK_OUT) 2416 common->state = FSG_STATE_STATUS_PHASE; 2417 else { 2418 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { 2419 curlun = common->luns[i]; 2420 if (!curlun) 2421 continue; 2422 curlun->prevent_medium_removal = 0; 2423 curlun->sense_data = SS_NO_SENSE; 2424 curlun->unit_attention_data = SS_NO_SENSE; 2425 curlun->sense_data_info = 0; 2426 curlun->info_valid = 0; 2427 } 2428 common->state = FSG_STATE_IDLE; 2429 } 2430 spin_unlock_irq(&common->lock); 2431 2432 /* Carry out any extra actions required for the exception */ 2433 switch (old_state) { 2434 case FSG_STATE_ABORT_BULK_OUT: 2435 send_status(common); 2436 spin_lock_irq(&common->lock); 2437 if (common->state == FSG_STATE_STATUS_PHASE) 2438 common->state = FSG_STATE_IDLE; 2439 spin_unlock_irq(&common->lock); 2440 break; 2441 2442 case FSG_STATE_RESET: 2443 /* 2444 * In case we were forced against our will to halt a 2445 * bulk endpoint, clear the halt now. (The SuperH UDC 2446 * requires this.) 2447 */ 2448 if (!fsg_is_set(common)) 2449 break; 2450 if (test_and_clear_bit(IGNORE_BULK_OUT, 2451 &common->fsg->atomic_bitflags)) 2452 usb_ep_clear_halt(common->fsg->bulk_in); 2453 2454 if (common->ep0_req_tag == exception_req_tag) 2455 ep0_queue(common); /* Complete the status stage */ 2456 2457 /* 2458 * Technically this should go here, but it would only be 2459 * a waste of time. Ditto for the INTERFACE_CHANGE and 2460 * CONFIG_CHANGE cases. 2461 */ 2462 /* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */ 2463 /* if (common->luns[i]) */ 2464 /* common->luns[i]->unit_attention_data = */ 2465 /* SS_RESET_OCCURRED; */ 2466 break; 2467 2468 case FSG_STATE_CONFIG_CHANGE: 2469 do_set_interface(common, common->new_fsg); 2470 if (common->new_fsg) 2471 usb_composite_setup_continue(common->cdev); 2472 break; 2473 2474 case FSG_STATE_EXIT: 2475 case FSG_STATE_TERMINATED: 2476 do_set_interface(common, NULL); /* Free resources */ 2477 spin_lock_irq(&common->lock); 2478 common->state = FSG_STATE_TERMINATED; /* Stop the thread */ 2479 spin_unlock_irq(&common->lock); 2480 break; 2481 2482 case FSG_STATE_INTERFACE_CHANGE: 2483 case FSG_STATE_DISCONNECT: 2484 case FSG_STATE_COMMAND_PHASE: 2485 case FSG_STATE_DATA_PHASE: 2486 case FSG_STATE_STATUS_PHASE: 2487 case FSG_STATE_IDLE: 2488 break; 2489 } 2490 } 2491 2492 2493 /*-------------------------------------------------------------------------*/ 2494 2495 static int fsg_main_thread(void *common_) 2496 { 2497 struct fsg_common *common = common_; 2498 2499 /* 2500 * Allow the thread to be killed by a signal, but set the signal mask 2501 * to block everything but INT, TERM, KILL, and USR1. 2502 */ 2503 allow_signal(SIGINT); 2504 allow_signal(SIGTERM); 2505 allow_signal(SIGKILL); 2506 allow_signal(SIGUSR1); 2507 2508 /* Allow the thread to be frozen */ 2509 set_freezable(); 2510 2511 /* 2512 * Arrange for userspace references to be interpreted as kernel 2513 * pointers. That way we can pass a kernel pointer to a routine 2514 * that expects a __user pointer and it will work okay. 2515 */ 2516 set_fs(get_ds()); 2517 2518 /* The main loop */ 2519 while (common->state != FSG_STATE_TERMINATED) { 2520 if (exception_in_progress(common) || signal_pending(current)) { 2521 handle_exception(common); 2522 continue; 2523 } 2524 2525 if (!common->running) { 2526 sleep_thread(common, true); 2527 continue; 2528 } 2529 2530 if (get_next_command(common)) 2531 continue; 2532 2533 spin_lock_irq(&common->lock); 2534 if (!exception_in_progress(common)) 2535 common->state = FSG_STATE_DATA_PHASE; 2536 spin_unlock_irq(&common->lock); 2537 2538 if (do_scsi_command(common) || finish_reply(common)) 2539 continue; 2540 2541 spin_lock_irq(&common->lock); 2542 if (!exception_in_progress(common)) 2543 common->state = FSG_STATE_STATUS_PHASE; 2544 spin_unlock_irq(&common->lock); 2545 2546 if (send_status(common)) 2547 continue; 2548 2549 spin_lock_irq(&common->lock); 2550 if (!exception_in_progress(common)) 2551 common->state = FSG_STATE_IDLE; 2552 spin_unlock_irq(&common->lock); 2553 } 2554 2555 spin_lock_irq(&common->lock); 2556 common->thread_task = NULL; 2557 spin_unlock_irq(&common->lock); 2558 2559 if (!common->ops || !common->ops->thread_exits 2560 || common->ops->thread_exits(common) < 0) { 2561 int i; 2562 2563 down_write(&common->filesem); 2564 for (i = 0; i < ARRAY_SIZE(common->luns); --i) { 2565 struct fsg_lun *curlun = common->luns[i]; 2566 if (!curlun || !fsg_lun_is_open(curlun)) 2567 continue; 2568 2569 fsg_lun_close(curlun); 2570 curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; 2571 } 2572 up_write(&common->filesem); 2573 } 2574 2575 /* Let fsg_unbind() know the thread has exited */ 2576 complete_and_exit(&common->thread_notifier, 0); 2577 } 2578 2579 2580 /*************************** DEVICE ATTRIBUTES ***************************/ 2581 2582 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf) 2583 { 2584 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2585 2586 return fsg_show_ro(curlun, buf); 2587 } 2588 2589 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr, 2590 char *buf) 2591 { 2592 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2593 2594 return fsg_show_nofua(curlun, buf); 2595 } 2596 2597 static ssize_t file_show(struct device *dev, struct device_attribute *attr, 2598 char *buf) 2599 { 2600 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2601 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2602 2603 return fsg_show_file(curlun, filesem, buf); 2604 } 2605 2606 static ssize_t ro_store(struct device *dev, struct device_attribute *attr, 2607 const char *buf, size_t count) 2608 { 2609 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2610 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2611 2612 return fsg_store_ro(curlun, filesem, buf, count); 2613 } 2614 2615 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, 2616 const char *buf, size_t count) 2617 { 2618 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2619 2620 return fsg_store_nofua(curlun, buf, count); 2621 } 2622 2623 static ssize_t file_store(struct device *dev, struct device_attribute *attr, 2624 const char *buf, size_t count) 2625 { 2626 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2627 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2628 2629 return fsg_store_file(curlun, filesem, buf, count); 2630 } 2631 2632 static DEVICE_ATTR_RW(nofua); 2633 /* mode wil be set in fsg_lun_attr_is_visible() */ 2634 static DEVICE_ATTR(ro, 0, ro_show, ro_store); 2635 static DEVICE_ATTR(file, 0, file_show, file_store); 2636 2637 /****************************** FSG COMMON ******************************/ 2638 2639 static void fsg_common_release(struct kref *ref); 2640 2641 static void fsg_lun_release(struct device *dev) 2642 { 2643 /* Nothing needs to be done */ 2644 } 2645 2646 void fsg_common_get(struct fsg_common *common) 2647 { 2648 kref_get(&common->ref); 2649 } 2650 EXPORT_SYMBOL_GPL(fsg_common_get); 2651 2652 void fsg_common_put(struct fsg_common *common) 2653 { 2654 kref_put(&common->ref, fsg_common_release); 2655 } 2656 EXPORT_SYMBOL_GPL(fsg_common_put); 2657 2658 /* check if fsg_num_buffers is within a valid range */ 2659 static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers) 2660 { 2661 #define FSG_MAX_NUM_BUFFERS 32 2662 2663 if (fsg_num_buffers >= 2 && fsg_num_buffers <= FSG_MAX_NUM_BUFFERS) 2664 return 0; 2665 pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", 2666 fsg_num_buffers, 2, FSG_MAX_NUM_BUFFERS); 2667 return -EINVAL; 2668 } 2669 2670 static struct fsg_common *fsg_common_setup(struct fsg_common *common) 2671 { 2672 if (!common) { 2673 common = kzalloc(sizeof(*common), GFP_KERNEL); 2674 if (!common) 2675 return ERR_PTR(-ENOMEM); 2676 common->free_storage_on_release = 1; 2677 } else { 2678 common->free_storage_on_release = 0; 2679 } 2680 init_rwsem(&common->filesem); 2681 spin_lock_init(&common->lock); 2682 kref_init(&common->ref); 2683 init_completion(&common->thread_notifier); 2684 init_waitqueue_head(&common->fsg_wait); 2685 common->state = FSG_STATE_TERMINATED; 2686 memset(common->luns, 0, sizeof(common->luns)); 2687 2688 return common; 2689 } 2690 2691 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs) 2692 { 2693 common->sysfs = sysfs; 2694 } 2695 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs); 2696 2697 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n) 2698 { 2699 if (buffhds) { 2700 struct fsg_buffhd *bh = buffhds; 2701 while (n--) { 2702 kfree(bh->buf); 2703 ++bh; 2704 } 2705 kfree(buffhds); 2706 } 2707 } 2708 2709 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n) 2710 { 2711 struct fsg_buffhd *bh, *buffhds; 2712 int i, rc; 2713 2714 rc = fsg_num_buffers_validate(n); 2715 if (rc != 0) 2716 return rc; 2717 2718 buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL); 2719 if (!buffhds) 2720 return -ENOMEM; 2721 2722 /* Data buffers cyclic list */ 2723 bh = buffhds; 2724 i = n; 2725 goto buffhds_first_it; 2726 do { 2727 bh->next = bh + 1; 2728 ++bh; 2729 buffhds_first_it: 2730 bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); 2731 if (unlikely(!bh->buf)) 2732 goto error_release; 2733 } while (--i); 2734 bh->next = buffhds; 2735 2736 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 2737 common->fsg_num_buffers = n; 2738 common->buffhds = buffhds; 2739 2740 return 0; 2741 2742 error_release: 2743 /* 2744 * "buf"s pointed to by heads after n - i are NULL 2745 * so releasing them won't hurt 2746 */ 2747 _fsg_common_free_buffers(buffhds, n); 2748 2749 return -ENOMEM; 2750 } 2751 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); 2752 2753 void fsg_common_remove_lun(struct fsg_lun *lun) 2754 { 2755 if (device_is_registered(&lun->dev)) 2756 device_unregister(&lun->dev); 2757 fsg_lun_close(lun); 2758 kfree(lun); 2759 } 2760 EXPORT_SYMBOL_GPL(fsg_common_remove_lun); 2761 2762 static void _fsg_common_remove_luns(struct fsg_common *common, int n) 2763 { 2764 int i; 2765 2766 for (i = 0; i < n; ++i) 2767 if (common->luns[i]) { 2768 fsg_common_remove_lun(common->luns[i]); 2769 common->luns[i] = NULL; 2770 } 2771 } 2772 2773 void fsg_common_remove_luns(struct fsg_common *common) 2774 { 2775 _fsg_common_remove_luns(common, ARRAY_SIZE(common->luns)); 2776 } 2777 EXPORT_SYMBOL_GPL(fsg_common_remove_luns); 2778 2779 void fsg_common_set_ops(struct fsg_common *common, 2780 const struct fsg_operations *ops) 2781 { 2782 common->ops = ops; 2783 } 2784 EXPORT_SYMBOL_GPL(fsg_common_set_ops); 2785 2786 void fsg_common_free_buffers(struct fsg_common *common) 2787 { 2788 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 2789 common->buffhds = NULL; 2790 } 2791 EXPORT_SYMBOL_GPL(fsg_common_free_buffers); 2792 2793 int fsg_common_set_cdev(struct fsg_common *common, 2794 struct usb_composite_dev *cdev, bool can_stall) 2795 { 2796 struct usb_string *us; 2797 2798 common->gadget = cdev->gadget; 2799 common->ep0 = cdev->gadget->ep0; 2800 common->ep0req = cdev->req; 2801 common->cdev = cdev; 2802 2803 us = usb_gstrings_attach(cdev, fsg_strings_array, 2804 ARRAY_SIZE(fsg_strings)); 2805 if (IS_ERR(us)) 2806 return PTR_ERR(us); 2807 2808 fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id; 2809 2810 /* 2811 * Some peripheral controllers are known not to be able to 2812 * halt bulk endpoints correctly. If one of them is present, 2813 * disable stalls. 2814 */ 2815 common->can_stall = can_stall && 2816 gadget_is_stall_supported(common->gadget); 2817 2818 return 0; 2819 } 2820 EXPORT_SYMBOL_GPL(fsg_common_set_cdev); 2821 2822 static struct attribute *fsg_lun_dev_attrs[] = { 2823 &dev_attr_ro.attr, 2824 &dev_attr_file.attr, 2825 &dev_attr_nofua.attr, 2826 NULL 2827 }; 2828 2829 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj, 2830 struct attribute *attr, int idx) 2831 { 2832 struct device *dev = kobj_to_dev(kobj); 2833 struct fsg_lun *lun = fsg_lun_from_dev(dev); 2834 2835 if (attr == &dev_attr_ro.attr) 2836 return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO); 2837 if (attr == &dev_attr_file.attr) 2838 return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO; 2839 return attr->mode; 2840 } 2841 2842 static const struct attribute_group fsg_lun_dev_group = { 2843 .attrs = fsg_lun_dev_attrs, 2844 .is_visible = fsg_lun_dev_is_visible, 2845 }; 2846 2847 static const struct attribute_group *fsg_lun_dev_groups[] = { 2848 &fsg_lun_dev_group, 2849 NULL 2850 }; 2851 2852 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, 2853 unsigned int id, const char *name, 2854 const char **name_pfx) 2855 { 2856 struct fsg_lun *lun; 2857 char *pathbuf, *p; 2858 int rc = -ENOMEM; 2859 2860 if (id >= ARRAY_SIZE(common->luns)) 2861 return -ENODEV; 2862 2863 if (common->luns[id]) 2864 return -EBUSY; 2865 2866 if (!cfg->filename && !cfg->removable) { 2867 pr_err("no file given for LUN%d\n", id); 2868 return -EINVAL; 2869 } 2870 2871 lun = kzalloc(sizeof(*lun), GFP_KERNEL); 2872 if (!lun) 2873 return -ENOMEM; 2874 2875 lun->name_pfx = name_pfx; 2876 2877 lun->cdrom = !!cfg->cdrom; 2878 lun->ro = cfg->cdrom || cfg->ro; 2879 lun->initially_ro = lun->ro; 2880 lun->removable = !!cfg->removable; 2881 2882 if (!common->sysfs) { 2883 /* we DON'T own the name!*/ 2884 lun->name = name; 2885 } else { 2886 lun->dev.release = fsg_lun_release; 2887 lun->dev.parent = &common->gadget->dev; 2888 lun->dev.groups = fsg_lun_dev_groups; 2889 dev_set_drvdata(&lun->dev, &common->filesem); 2890 dev_set_name(&lun->dev, "%s", name); 2891 lun->name = dev_name(&lun->dev); 2892 2893 rc = device_register(&lun->dev); 2894 if (rc) { 2895 pr_info("failed to register LUN%d: %d\n", id, rc); 2896 put_device(&lun->dev); 2897 goto error_sysfs; 2898 } 2899 } 2900 2901 common->luns[id] = lun; 2902 2903 if (cfg->filename) { 2904 rc = fsg_lun_open(lun, cfg->filename); 2905 if (rc) 2906 goto error_lun; 2907 } 2908 2909 pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); 2910 p = "(no medium)"; 2911 if (fsg_lun_is_open(lun)) { 2912 p = "(error)"; 2913 if (pathbuf) { 2914 p = file_path(lun->filp, pathbuf, PATH_MAX); 2915 if (IS_ERR(p)) 2916 p = "(error)"; 2917 } 2918 } 2919 pr_info("LUN: %s%s%sfile: %s\n", 2920 lun->removable ? "removable " : "", 2921 lun->ro ? "read only " : "", 2922 lun->cdrom ? "CD-ROM " : "", 2923 p); 2924 kfree(pathbuf); 2925 2926 return 0; 2927 2928 error_lun: 2929 if (device_is_registered(&lun->dev)) 2930 device_unregister(&lun->dev); 2931 fsg_lun_close(lun); 2932 common->luns[id] = NULL; 2933 error_sysfs: 2934 kfree(lun); 2935 return rc; 2936 } 2937 EXPORT_SYMBOL_GPL(fsg_common_create_lun); 2938 2939 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg) 2940 { 2941 char buf[8]; /* enough for 100000000 different numbers, decimal */ 2942 int i, rc; 2943 2944 fsg_common_remove_luns(common); 2945 2946 for (i = 0; i < cfg->nluns; ++i) { 2947 snprintf(buf, sizeof(buf), "lun%d", i); 2948 rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL); 2949 if (rc) 2950 goto fail; 2951 } 2952 2953 pr_info("Number of LUNs=%d\n", cfg->nluns); 2954 2955 return 0; 2956 2957 fail: 2958 _fsg_common_remove_luns(common, i); 2959 return rc; 2960 } 2961 EXPORT_SYMBOL_GPL(fsg_common_create_luns); 2962 2963 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, 2964 const char *pn) 2965 { 2966 int i; 2967 2968 /* Prepare inquiryString */ 2969 i = get_default_bcdDevice(); 2970 snprintf(common->inquiry_string, sizeof(common->inquiry_string), 2971 "%-8s%-16s%04x", vn ?: "Linux", 2972 /* Assume product name dependent on the first LUN */ 2973 pn ?: ((*common->luns)->cdrom 2974 ? "File-CD Gadget" 2975 : "File-Stor Gadget"), 2976 i); 2977 } 2978 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string); 2979 2980 int fsg_common_run_thread(struct fsg_common *common) 2981 { 2982 common->state = FSG_STATE_IDLE; 2983 /* Tell the thread to start working */ 2984 common->thread_task = 2985 kthread_create(fsg_main_thread, common, "file-storage"); 2986 if (IS_ERR(common->thread_task)) { 2987 common->state = FSG_STATE_TERMINATED; 2988 return PTR_ERR(common->thread_task); 2989 } 2990 2991 DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task)); 2992 2993 wake_up_process(common->thread_task); 2994 2995 return 0; 2996 } 2997 EXPORT_SYMBOL_GPL(fsg_common_run_thread); 2998 2999 static void fsg_common_release(struct kref *ref) 3000 { 3001 struct fsg_common *common = container_of(ref, struct fsg_common, ref); 3002 int i; 3003 3004 /* If the thread isn't already dead, tell it to exit now */ 3005 if (common->state != FSG_STATE_TERMINATED) { 3006 raise_exception(common, FSG_STATE_EXIT); 3007 wait_for_completion(&common->thread_notifier); 3008 } 3009 3010 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { 3011 struct fsg_lun *lun = common->luns[i]; 3012 if (!lun) 3013 continue; 3014 fsg_lun_close(lun); 3015 if (device_is_registered(&lun->dev)) 3016 device_unregister(&lun->dev); 3017 kfree(lun); 3018 } 3019 3020 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 3021 if (common->free_storage_on_release) 3022 kfree(common); 3023 } 3024 3025 3026 /*-------------------------------------------------------------------------*/ 3027 3028 static int fsg_bind(struct usb_configuration *c, struct usb_function *f) 3029 { 3030 struct fsg_dev *fsg = fsg_from_func(f); 3031 struct fsg_common *common = fsg->common; 3032 struct usb_gadget *gadget = c->cdev->gadget; 3033 int i; 3034 struct usb_ep *ep; 3035 unsigned max_burst; 3036 int ret; 3037 struct fsg_opts *opts; 3038 3039 /* Don't allow to bind if we don't have at least one LUN */ 3040 ret = _fsg_common_get_max_lun(common); 3041 if (ret < 0) { 3042 pr_err("There should be at least one LUN.\n"); 3043 return -EINVAL; 3044 } 3045 3046 opts = fsg_opts_from_func_inst(f->fi); 3047 if (!opts->no_configfs) { 3048 ret = fsg_common_set_cdev(fsg->common, c->cdev, 3049 fsg->common->can_stall); 3050 if (ret) 3051 return ret; 3052 fsg_common_set_inquiry_string(fsg->common, NULL, NULL); 3053 ret = fsg_common_run_thread(fsg->common); 3054 if (ret) 3055 return ret; 3056 } 3057 3058 fsg->gadget = gadget; 3059 3060 /* New interface */ 3061 i = usb_interface_id(c, f); 3062 if (i < 0) 3063 goto fail; 3064 fsg_intf_desc.bInterfaceNumber = i; 3065 fsg->interface_number = i; 3066 3067 /* Find all the endpoints we will use */ 3068 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); 3069 if (!ep) 3070 goto autoconf_fail; 3071 fsg->bulk_in = ep; 3072 3073 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); 3074 if (!ep) 3075 goto autoconf_fail; 3076 fsg->bulk_out = ep; 3077 3078 /* Assume endpoint addresses are the same for both speeds */ 3079 fsg_hs_bulk_in_desc.bEndpointAddress = 3080 fsg_fs_bulk_in_desc.bEndpointAddress; 3081 fsg_hs_bulk_out_desc.bEndpointAddress = 3082 fsg_fs_bulk_out_desc.bEndpointAddress; 3083 3084 /* Calculate bMaxBurst, we know packet size is 1024 */ 3085 max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); 3086 3087 fsg_ss_bulk_in_desc.bEndpointAddress = 3088 fsg_fs_bulk_in_desc.bEndpointAddress; 3089 fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; 3090 3091 fsg_ss_bulk_out_desc.bEndpointAddress = 3092 fsg_fs_bulk_out_desc.bEndpointAddress; 3093 fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; 3094 3095 ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function, 3096 fsg_ss_function); 3097 if (ret) 3098 goto autoconf_fail; 3099 3100 return 0; 3101 3102 autoconf_fail: 3103 ERROR(fsg, "unable to autoconfigure all endpoints\n"); 3104 i = -ENOTSUPP; 3105 fail: 3106 /* terminate the thread */ 3107 if (fsg->common->state != FSG_STATE_TERMINATED) { 3108 raise_exception(fsg->common, FSG_STATE_EXIT); 3109 wait_for_completion(&fsg->common->thread_notifier); 3110 } 3111 return i; 3112 } 3113 3114 /****************************** ALLOCATE FUNCTION *************************/ 3115 3116 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) 3117 { 3118 struct fsg_dev *fsg = fsg_from_func(f); 3119 struct fsg_common *common = fsg->common; 3120 3121 DBG(fsg, "unbind\n"); 3122 if (fsg->common->fsg == fsg) { 3123 fsg->common->new_fsg = NULL; 3124 raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); 3125 /* FIXME: make interruptible or killable somehow? */ 3126 wait_event(common->fsg_wait, common->fsg != fsg); 3127 } 3128 3129 usb_free_all_descriptors(&fsg->function); 3130 } 3131 3132 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item) 3133 { 3134 return container_of(to_config_group(item), struct fsg_lun_opts, group); 3135 } 3136 3137 static inline struct fsg_opts *to_fsg_opts(struct config_item *item) 3138 { 3139 return container_of(to_config_group(item), struct fsg_opts, 3140 func_inst.group); 3141 } 3142 3143 static void fsg_lun_attr_release(struct config_item *item) 3144 { 3145 struct fsg_lun_opts *lun_opts; 3146 3147 lun_opts = to_fsg_lun_opts(item); 3148 kfree(lun_opts); 3149 } 3150 3151 static struct configfs_item_operations fsg_lun_item_ops = { 3152 .release = fsg_lun_attr_release, 3153 }; 3154 3155 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page) 3156 { 3157 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3158 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3159 3160 return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page); 3161 } 3162 3163 static ssize_t fsg_lun_opts_file_store(struct config_item *item, 3164 const char *page, size_t len) 3165 { 3166 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3167 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3168 3169 return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len); 3170 } 3171 3172 CONFIGFS_ATTR(fsg_lun_opts_, file); 3173 3174 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page) 3175 { 3176 return fsg_show_ro(to_fsg_lun_opts(item)->lun, page); 3177 } 3178 3179 static ssize_t fsg_lun_opts_ro_store(struct config_item *item, 3180 const char *page, size_t len) 3181 { 3182 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3183 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3184 3185 return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len); 3186 } 3187 3188 CONFIGFS_ATTR(fsg_lun_opts_, ro); 3189 3190 static ssize_t fsg_lun_opts_removable_show(struct config_item *item, 3191 char *page) 3192 { 3193 return fsg_show_removable(to_fsg_lun_opts(item)->lun, page); 3194 } 3195 3196 static ssize_t fsg_lun_opts_removable_store(struct config_item *item, 3197 const char *page, size_t len) 3198 { 3199 return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len); 3200 } 3201 3202 CONFIGFS_ATTR(fsg_lun_opts_, removable); 3203 3204 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page) 3205 { 3206 return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page); 3207 } 3208 3209 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item, 3210 const char *page, size_t len) 3211 { 3212 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3213 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3214 3215 return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page, 3216 len); 3217 } 3218 3219 CONFIGFS_ATTR(fsg_lun_opts_, cdrom); 3220 3221 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page) 3222 { 3223 return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page); 3224 } 3225 3226 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item, 3227 const char *page, size_t len) 3228 { 3229 return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len); 3230 } 3231 3232 CONFIGFS_ATTR(fsg_lun_opts_, nofua); 3233 3234 static struct configfs_attribute *fsg_lun_attrs[] = { 3235 &fsg_lun_opts_attr_file, 3236 &fsg_lun_opts_attr_ro, 3237 &fsg_lun_opts_attr_removable, 3238 &fsg_lun_opts_attr_cdrom, 3239 &fsg_lun_opts_attr_nofua, 3240 NULL, 3241 }; 3242 3243 static struct config_item_type fsg_lun_type = { 3244 .ct_item_ops = &fsg_lun_item_ops, 3245 .ct_attrs = fsg_lun_attrs, 3246 .ct_owner = THIS_MODULE, 3247 }; 3248 3249 static struct config_group *fsg_lun_make(struct config_group *group, 3250 const char *name) 3251 { 3252 struct fsg_lun_opts *opts; 3253 struct fsg_opts *fsg_opts; 3254 struct fsg_lun_config config; 3255 char *num_str; 3256 u8 num; 3257 int ret; 3258 3259 num_str = strchr(name, '.'); 3260 if (!num_str) { 3261 pr_err("Unable to locate . in LUN.NUMBER\n"); 3262 return ERR_PTR(-EINVAL); 3263 } 3264 num_str++; 3265 3266 ret = kstrtou8(num_str, 0, &num); 3267 if (ret) 3268 return ERR_PTR(ret); 3269 3270 fsg_opts = to_fsg_opts(&group->cg_item); 3271 if (num >= FSG_MAX_LUNS) 3272 return ERR_PTR(-ERANGE); 3273 3274 mutex_lock(&fsg_opts->lock); 3275 if (fsg_opts->refcnt || fsg_opts->common->luns[num]) { 3276 ret = -EBUSY; 3277 goto out; 3278 } 3279 3280 opts = kzalloc(sizeof(*opts), GFP_KERNEL); 3281 if (!opts) { 3282 ret = -ENOMEM; 3283 goto out; 3284 } 3285 3286 memset(&config, 0, sizeof(config)); 3287 config.removable = true; 3288 3289 ret = fsg_common_create_lun(fsg_opts->common, &config, num, name, 3290 (const char **)&group->cg_item.ci_name); 3291 if (ret) { 3292 kfree(opts); 3293 goto out; 3294 } 3295 opts->lun = fsg_opts->common->luns[num]; 3296 opts->lun_id = num; 3297 mutex_unlock(&fsg_opts->lock); 3298 3299 config_group_init_type_name(&opts->group, name, &fsg_lun_type); 3300 3301 return &opts->group; 3302 out: 3303 mutex_unlock(&fsg_opts->lock); 3304 return ERR_PTR(ret); 3305 } 3306 3307 static void fsg_lun_drop(struct config_group *group, struct config_item *item) 3308 { 3309 struct fsg_lun_opts *lun_opts; 3310 struct fsg_opts *fsg_opts; 3311 3312 lun_opts = to_fsg_lun_opts(item); 3313 fsg_opts = to_fsg_opts(&group->cg_item); 3314 3315 mutex_lock(&fsg_opts->lock); 3316 if (fsg_opts->refcnt) { 3317 struct config_item *gadget; 3318 3319 gadget = group->cg_item.ci_parent->ci_parent; 3320 unregister_gadget_item(gadget); 3321 } 3322 3323 fsg_common_remove_lun(lun_opts->lun); 3324 fsg_opts->common->luns[lun_opts->lun_id] = NULL; 3325 lun_opts->lun_id = 0; 3326 mutex_unlock(&fsg_opts->lock); 3327 3328 config_item_put(item); 3329 } 3330 3331 static void fsg_attr_release(struct config_item *item) 3332 { 3333 struct fsg_opts *opts = to_fsg_opts(item); 3334 3335 usb_put_function_instance(&opts->func_inst); 3336 } 3337 3338 static struct configfs_item_operations fsg_item_ops = { 3339 .release = fsg_attr_release, 3340 }; 3341 3342 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page) 3343 { 3344 struct fsg_opts *opts = to_fsg_opts(item); 3345 int result; 3346 3347 mutex_lock(&opts->lock); 3348 result = sprintf(page, "%d", opts->common->can_stall); 3349 mutex_unlock(&opts->lock); 3350 3351 return result; 3352 } 3353 3354 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page, 3355 size_t len) 3356 { 3357 struct fsg_opts *opts = to_fsg_opts(item); 3358 int ret; 3359 bool stall; 3360 3361 mutex_lock(&opts->lock); 3362 3363 if (opts->refcnt) { 3364 mutex_unlock(&opts->lock); 3365 return -EBUSY; 3366 } 3367 3368 ret = strtobool(page, &stall); 3369 if (!ret) { 3370 opts->common->can_stall = stall; 3371 ret = len; 3372 } 3373 3374 mutex_unlock(&opts->lock); 3375 3376 return ret; 3377 } 3378 3379 CONFIGFS_ATTR(fsg_opts_, stall); 3380 3381 #ifdef CONFIG_USB_GADGET_DEBUG_FILES 3382 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page) 3383 { 3384 struct fsg_opts *opts = to_fsg_opts(item); 3385 int result; 3386 3387 mutex_lock(&opts->lock); 3388 result = sprintf(page, "%d", opts->common->fsg_num_buffers); 3389 mutex_unlock(&opts->lock); 3390 3391 return result; 3392 } 3393 3394 static ssize_t fsg_opts_num_buffers_store(struct config_item *item, 3395 const char *page, size_t len) 3396 { 3397 struct fsg_opts *opts = to_fsg_opts(item); 3398 int ret; 3399 u8 num; 3400 3401 mutex_lock(&opts->lock); 3402 if (opts->refcnt) { 3403 ret = -EBUSY; 3404 goto end; 3405 } 3406 ret = kstrtou8(page, 0, &num); 3407 if (ret) 3408 goto end; 3409 3410 ret = fsg_num_buffers_validate(num); 3411 if (ret) 3412 goto end; 3413 3414 fsg_common_set_num_buffers(opts->common, num); 3415 ret = len; 3416 3417 end: 3418 mutex_unlock(&opts->lock); 3419 return ret; 3420 } 3421 3422 CONFIGFS_ATTR(fsg_opts_, num_buffers); 3423 #endif 3424 3425 static struct configfs_attribute *fsg_attrs[] = { 3426 &fsg_opts_attr_stall, 3427 #ifdef CONFIG_USB_GADGET_DEBUG_FILES 3428 &fsg_opts_attr_num_buffers, 3429 #endif 3430 NULL, 3431 }; 3432 3433 static struct configfs_group_operations fsg_group_ops = { 3434 .make_group = fsg_lun_make, 3435 .drop_item = fsg_lun_drop, 3436 }; 3437 3438 static struct config_item_type fsg_func_type = { 3439 .ct_item_ops = &fsg_item_ops, 3440 .ct_group_ops = &fsg_group_ops, 3441 .ct_attrs = fsg_attrs, 3442 .ct_owner = THIS_MODULE, 3443 }; 3444 3445 static void fsg_free_inst(struct usb_function_instance *fi) 3446 { 3447 struct fsg_opts *opts; 3448 3449 opts = fsg_opts_from_func_inst(fi); 3450 fsg_common_put(opts->common); 3451 kfree(opts); 3452 } 3453 3454 static struct usb_function_instance *fsg_alloc_inst(void) 3455 { 3456 struct fsg_opts *opts; 3457 struct fsg_lun_config config; 3458 int rc; 3459 3460 opts = kzalloc(sizeof(*opts), GFP_KERNEL); 3461 if (!opts) 3462 return ERR_PTR(-ENOMEM); 3463 mutex_init(&opts->lock); 3464 opts->func_inst.free_func_inst = fsg_free_inst; 3465 opts->common = fsg_common_setup(opts->common); 3466 if (IS_ERR(opts->common)) { 3467 rc = PTR_ERR(opts->common); 3468 goto release_opts; 3469 } 3470 3471 rc = fsg_common_set_num_buffers(opts->common, 3472 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS); 3473 if (rc) 3474 goto release_opts; 3475 3476 pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); 3477 3478 memset(&config, 0, sizeof(config)); 3479 config.removable = true; 3480 rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0", 3481 (const char **)&opts->func_inst.group.cg_item.ci_name); 3482 if (rc) 3483 goto release_buffers; 3484 3485 opts->lun0.lun = opts->common->luns[0]; 3486 opts->lun0.lun_id = 0; 3487 config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type); 3488 opts->default_groups[0] = &opts->lun0.group; 3489 opts->func_inst.group.default_groups = opts->default_groups; 3490 3491 config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type); 3492 3493 return &opts->func_inst; 3494 3495 release_buffers: 3496 fsg_common_free_buffers(opts->common); 3497 release_opts: 3498 kfree(opts); 3499 return ERR_PTR(rc); 3500 } 3501 3502 static void fsg_free(struct usb_function *f) 3503 { 3504 struct fsg_dev *fsg; 3505 struct fsg_opts *opts; 3506 3507 fsg = container_of(f, struct fsg_dev, function); 3508 opts = container_of(f->fi, struct fsg_opts, func_inst); 3509 3510 mutex_lock(&opts->lock); 3511 opts->refcnt--; 3512 mutex_unlock(&opts->lock); 3513 3514 kfree(fsg); 3515 } 3516 3517 static struct usb_function *fsg_alloc(struct usb_function_instance *fi) 3518 { 3519 struct fsg_opts *opts = fsg_opts_from_func_inst(fi); 3520 struct fsg_common *common = opts->common; 3521 struct fsg_dev *fsg; 3522 3523 fsg = kzalloc(sizeof(*fsg), GFP_KERNEL); 3524 if (unlikely(!fsg)) 3525 return ERR_PTR(-ENOMEM); 3526 3527 mutex_lock(&opts->lock); 3528 opts->refcnt++; 3529 mutex_unlock(&opts->lock); 3530 3531 fsg->function.name = FSG_DRIVER_DESC; 3532 fsg->function.bind = fsg_bind; 3533 fsg->function.unbind = fsg_unbind; 3534 fsg->function.setup = fsg_setup; 3535 fsg->function.set_alt = fsg_set_alt; 3536 fsg->function.disable = fsg_disable; 3537 fsg->function.free_func = fsg_free; 3538 3539 fsg->common = common; 3540 3541 return &fsg->function; 3542 } 3543 3544 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc); 3545 MODULE_LICENSE("GPL"); 3546 MODULE_AUTHOR("Michal Nazarewicz"); 3547 3548 /************************* Module parameters *************************/ 3549 3550 3551 void fsg_config_from_params(struct fsg_config *cfg, 3552 const struct fsg_module_parameters *params, 3553 unsigned int fsg_num_buffers) 3554 { 3555 struct fsg_lun_config *lun; 3556 unsigned i; 3557 3558 /* Configure LUNs */ 3559 cfg->nluns = 3560 min(params->luns ?: (params->file_count ?: 1u), 3561 (unsigned)FSG_MAX_LUNS); 3562 for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { 3563 lun->ro = !!params->ro[i]; 3564 lun->cdrom = !!params->cdrom[i]; 3565 lun->removable = !!params->removable[i]; 3566 lun->filename = 3567 params->file_count > i && params->file[i][0] 3568 ? params->file[i] 3569 : NULL; 3570 } 3571 3572 /* Let MSF use defaults */ 3573 cfg->vendor_name = NULL; 3574 cfg->product_name = NULL; 3575 3576 cfg->ops = NULL; 3577 cfg->private_data = NULL; 3578 3579 /* Finalise */ 3580 cfg->can_stall = params->stall; 3581 cfg->fsg_num_buffers = fsg_num_buffers; 3582 } 3583 EXPORT_SYMBOL_GPL(fsg_config_from_params); 3584