1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * f_mass_storage.c -- Mass Storage USB Composite Function 4 * 5 * Copyright (C) 2003-2008 Alan Stern 6 * Copyright (C) 2009 Samsung Electronics 7 * Author: Michal Nazarewicz <mina86@mina86.com> 8 * All rights reserved. 9 */ 10 11 /* 12 * The Mass Storage Function acts as a USB Mass Storage device, 13 * appearing to the host as a disk drive or as a CD-ROM drive. In 14 * addition to providing an example of a genuinely useful composite 15 * function for a USB device, it also illustrates a technique of 16 * double-buffering for increased throughput. 17 * 18 * For more information about MSF and in particular its module 19 * parameters and sysfs interface read the 20 * <Documentation/usb/mass-storage.rst> file. 21 */ 22 23 /* 24 * MSF is configured by specifying a fsg_config structure. It has the 25 * following fields: 26 * 27 * nluns Number of LUNs function have (anywhere from 1 28 * to FSG_MAX_LUNS). 29 * luns An array of LUN configuration values. This 30 * should be filled for each LUN that 31 * function will include (ie. for "nluns" 32 * LUNs). Each element of the array has 33 * the following fields: 34 * ->filename The path to the backing file for the LUN. 35 * Required if LUN is not marked as 36 * removable. 37 * ->ro Flag specifying access to the LUN shall be 38 * read-only. This is implied if CD-ROM 39 * emulation is enabled as well as when 40 * it was impossible to open "filename" 41 * in R/W mode. 42 * ->removable Flag specifying that LUN shall be indicated as 43 * being removable. 44 * ->cdrom Flag specifying that LUN shall be reported as 45 * being a CD-ROM. 46 * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) 47 * commands for this LUN shall be ignored. 48 * 49 * vendor_name 50 * product_name 51 * release Information used as a reply to INQUIRY 52 * request. To use default set to NULL, 53 * NULL, 0xffff respectively. The first 54 * field should be 8 and the second 16 55 * characters or less. 56 * 57 * can_stall Set to permit function to halt bulk endpoints. 58 * Disabled on some USB devices known not 59 * to work correctly. You should set it 60 * to true. 61 * 62 * If "removable" is not set for a LUN then a backing file must be 63 * specified. If it is set, then NULL filename means the LUN's medium 64 * is not loaded (an empty string as "filename" in the fsg_config 65 * structure causes error). The CD-ROM emulation includes a single 66 * data track and no audio tracks; hence there need be only one 67 * backing file per LUN. 68 * 69 * This function is heavily based on "File-backed Storage Gadget" by 70 * Alan Stern which in turn is heavily based on "Gadget Zero" by David 71 * Brownell. The driver's SCSI command interface was based on the 72 * "Information technology - Small Computer System Interface - 2" 73 * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, 74 * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. 75 * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which 76 * was based on the "Universal Serial Bus Mass Storage Class UFI 77 * Command Specification" document, Revision 1.0, December 14, 1998, 78 * available at 79 * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. 80 */ 81 82 /* 83 * Driver Design 84 * 85 * The MSF is fairly straightforward. There is a main kernel 86 * thread that handles most of the work. Interrupt routines field 87 * callbacks from the controller driver: bulk- and interrupt-request 88 * completion notifications, endpoint-0 events, and disconnect events. 89 * Completion events are passed to the main thread by wakeup calls. Many 90 * ep0 requests are handled at interrupt time, but SetInterface, 91 * SetConfiguration, and device reset requests are forwarded to the 92 * thread in the form of "exceptions" using SIGUSR1 signals (since they 93 * should interrupt any ongoing file I/O operations). 94 * 95 * The thread's main routine implements the standard command/data/status 96 * parts of a SCSI interaction. It and its subroutines are full of tests 97 * for pending signals/exceptions -- all this polling is necessary since 98 * the kernel has no setjmp/longjmp equivalents. (Maybe this is an 99 * indication that the driver really wants to be running in userspace.) 100 * An important point is that so long as the thread is alive it keeps an 101 * open reference to the backing file. This will prevent unmounting 102 * the backing file's underlying filesystem and could cause problems 103 * during system shutdown, for example. To prevent such problems, the 104 * thread catches INT, TERM, and KILL signals and converts them into 105 * an EXIT exception. 106 * 107 * In normal operation the main thread is started during the gadget's 108 * fsg_bind() callback and stopped during fsg_unbind(). But it can 109 * also exit when it receives a signal, and there's no point leaving 110 * the gadget running when the thread is dead. As of this moment, MSF 111 * provides no way to deregister the gadget when thread dies -- maybe 112 * a callback functions is needed. 113 * 114 * To provide maximum throughput, the driver uses a circular pipeline of 115 * buffer heads (struct fsg_buffhd). In principle the pipeline can be 116 * arbitrarily long; in practice the benefits don't justify having more 117 * than 2 stages (i.e., double buffering). But it helps to think of the 118 * pipeline as being a long one. Each buffer head contains a bulk-in and 119 * a bulk-out request pointer (since the buffer can be used for both 120 * output and input -- directions always are given from the host's 121 * point of view) as well as a pointer to the buffer and various state 122 * variables. 123 * 124 * Use of the pipeline follows a simple protocol. There is a variable 125 * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. 126 * At any time that buffer head may still be in use from an earlier 127 * request, so each buffer head has a state variable indicating whether 128 * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the 129 * buffer head to be EMPTY, filling the buffer either by file I/O or by 130 * USB I/O (during which the buffer head is BUSY), and marking the buffer 131 * head FULL when the I/O is complete. Then the buffer will be emptied 132 * (again possibly by USB I/O, during which it is marked BUSY) and 133 * finally marked EMPTY again (possibly by a completion routine). 134 * 135 * A module parameter tells the driver to avoid stalling the bulk 136 * endpoints wherever the transport specification allows. This is 137 * necessary for some UDCs like the SuperH, which cannot reliably clear a 138 * halt on a bulk endpoint. However, under certain circumstances the 139 * Bulk-only specification requires a stall. In such cases the driver 140 * will halt the endpoint and set a flag indicating that it should clear 141 * the halt in software during the next device reset. Hopefully this 142 * will permit everything to work correctly. Furthermore, although the 143 * specification allows the bulk-out endpoint to halt when the host sends 144 * too much data, implementing this would cause an unavoidable race. 145 * The driver will always use the "no-stall" approach for OUT transfers. 146 * 147 * One subtle point concerns sending status-stage responses for ep0 148 * requests. Some of these requests, such as device reset, can involve 149 * interrupting an ongoing file I/O operation, which might take an 150 * arbitrarily long time. During that delay the host might give up on 151 * the original ep0 request and issue a new one. When that happens the 152 * driver should not notify the host about completion of the original 153 * request, as the host will no longer be waiting for it. So the driver 154 * assigns to each ep0 request a unique tag, and it keeps track of the 155 * tag value of the request associated with a long-running exception 156 * (device-reset, interface-change, or configuration-change). When the 157 * exception handler is finished, the status-stage response is submitted 158 * only if the current ep0 request tag is equal to the exception request 159 * tag. Thus only the most recently received ep0 request will get a 160 * status-stage response. 161 * 162 * Warning: This driver source file is too long. It ought to be split up 163 * into a header file plus about 3 separate .c files, to handle the details 164 * of the Gadget, USB Mass Storage, and SCSI protocols. 165 */ 166 167 168 /* #define VERBOSE_DEBUG */ 169 /* #define DUMP_MSGS */ 170 171 #include <linux/blkdev.h> 172 #include <linux/completion.h> 173 #include <linux/dcache.h> 174 #include <linux/delay.h> 175 #include <linux/device.h> 176 #include <linux/fcntl.h> 177 #include <linux/file.h> 178 #include <linux/fs.h> 179 #include <linux/kstrtox.h> 180 #include <linux/kthread.h> 181 #include <linux/sched/signal.h> 182 #include <linux/limits.h> 183 #include <linux/overflow.h> 184 #include <linux/pagemap.h> 185 #include <linux/rwsem.h> 186 #include <linux/slab.h> 187 #include <linux/spinlock.h> 188 #include <linux/string.h> 189 #include <linux/freezer.h> 190 #include <linux/module.h> 191 #include <linux/uaccess.h> 192 #include <linux/unaligned.h> 193 194 #include <linux/usb/ch9.h> 195 #include <linux/usb/gadget.h> 196 #include <linux/usb/composite.h> 197 198 #include <linux/nospec.h> 199 200 #include "configfs.h" 201 202 203 /*------------------------------------------------------------------------*/ 204 205 #define FSG_DRIVER_DESC "Mass Storage Function" 206 207 static const char fsg_string_interface[] = "Mass Storage"; 208 209 #include "storage_common.h" 210 #include "f_mass_storage.h" 211 212 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ 213 static struct usb_string fsg_strings[] = { 214 {FSG_STRING_INTERFACE, fsg_string_interface}, 215 {} 216 }; 217 218 static struct usb_gadget_strings fsg_stringtab = { 219 .language = 0x0409, /* en-us */ 220 .strings = fsg_strings, 221 }; 222 223 static struct usb_gadget_strings *fsg_strings_array[] = { 224 &fsg_stringtab, 225 NULL, 226 }; 227 228 /*-------------------------------------------------------------------------*/ 229 230 struct fsg_dev; 231 struct fsg_common; 232 233 /* Data shared by all the FSG instances. */ 234 struct fsg_common { 235 struct usb_gadget *gadget; 236 struct usb_composite_dev *cdev; 237 struct fsg_dev *fsg; 238 wait_queue_head_t io_wait; 239 wait_queue_head_t fsg_wait; 240 241 /* filesem protects: backing files in use */ 242 struct rw_semaphore filesem; 243 244 /* lock protects: state and thread_task */ 245 spinlock_t lock; 246 247 struct usb_ep *ep0; /* Copy of gadget->ep0 */ 248 struct usb_request *ep0req; /* Copy of cdev->req */ 249 unsigned int ep0_req_tag; 250 251 struct fsg_buffhd *next_buffhd_to_fill; 252 struct fsg_buffhd *next_buffhd_to_drain; 253 struct fsg_buffhd *buffhds; 254 unsigned int fsg_num_buffers; 255 256 int cmnd_size; 257 u8 cmnd[MAX_COMMAND_SIZE]; 258 259 unsigned int lun; 260 struct fsg_lun *luns[FSG_MAX_LUNS]; 261 struct fsg_lun *curlun; 262 263 unsigned int bulk_out_maxpacket; 264 enum fsg_state state; /* For exception handling */ 265 unsigned int exception_req_tag; 266 void *exception_arg; 267 268 enum data_direction data_dir; 269 u32 data_size; 270 u32 data_size_from_cmnd; 271 u32 tag; 272 u32 residue; 273 u32 usb_amount_left; 274 275 unsigned int can_stall:1; 276 unsigned int free_storage_on_release:1; 277 unsigned int phase_error:1; 278 unsigned int short_packet_received:1; 279 unsigned int bad_lun_okay:1; 280 unsigned int running:1; 281 unsigned int sysfs:1; 282 283 struct completion thread_notifier; 284 struct task_struct *thread_task; 285 286 /* Gadget's private data. */ 287 void *private_data; 288 289 char inquiry_string[INQUIRY_STRING_LEN]; 290 }; 291 292 struct fsg_dev { 293 struct usb_function function; 294 struct usb_gadget *gadget; /* Copy of cdev->gadget */ 295 struct fsg_common *common; 296 297 u16 interface_number; 298 299 unsigned int bulk_in_enabled:1; 300 unsigned int bulk_out_enabled:1; 301 302 unsigned long atomic_bitflags; 303 #define IGNORE_BULK_OUT 0 304 305 struct usb_ep *bulk_in; 306 struct usb_ep *bulk_out; 307 }; 308 309 static inline int __fsg_is_set(struct fsg_common *common, 310 const char *func, unsigned line) 311 { 312 if (common->fsg) 313 return 1; 314 ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); 315 WARN_ON(1); 316 return 0; 317 } 318 319 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) 320 321 static inline struct fsg_dev *fsg_from_func(struct usb_function *f) 322 { 323 return container_of(f, struct fsg_dev, function); 324 } 325 326 static int exception_in_progress(struct fsg_common *common) 327 { 328 return common->state > FSG_STATE_NORMAL; 329 } 330 331 /* Make bulk-out requests be divisible by the maxpacket size */ 332 static void set_bulk_out_req_length(struct fsg_common *common, 333 struct fsg_buffhd *bh, unsigned int length) 334 { 335 unsigned int rem; 336 337 bh->bulk_out_intended_length = length; 338 rem = length % common->bulk_out_maxpacket; 339 if (rem > 0) 340 length += common->bulk_out_maxpacket - rem; 341 bh->outreq->length = length; 342 } 343 344 345 /*-------------------------------------------------------------------------*/ 346 347 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) 348 { 349 const char *name; 350 351 if (ep == fsg->bulk_in) 352 name = "bulk-in"; 353 else if (ep == fsg->bulk_out) 354 name = "bulk-out"; 355 else 356 name = ep->name; 357 DBG(fsg, "%s set halt\n", name); 358 return usb_ep_set_halt(ep); 359 } 360 361 362 /*-------------------------------------------------------------------------*/ 363 364 /* These routines may be called in process context or in_irq */ 365 366 static void __raise_exception(struct fsg_common *common, enum fsg_state new_state, 367 void *arg) 368 { 369 unsigned long flags; 370 371 /* 372 * Do nothing if a higher-priority exception is already in progress. 373 * If a lower-or-equal priority exception is in progress, preempt it 374 * and notify the main thread by sending it a signal. 375 */ 376 spin_lock_irqsave(&common->lock, flags); 377 if (common->state <= new_state) { 378 common->exception_req_tag = common->ep0_req_tag; 379 common->state = new_state; 380 common->exception_arg = arg; 381 if (common->thread_task) 382 send_sig_info(SIGUSR1, SEND_SIG_PRIV, 383 common->thread_task); 384 } 385 spin_unlock_irqrestore(&common->lock, flags); 386 } 387 388 static void raise_exception(struct fsg_common *common, enum fsg_state new_state) 389 { 390 __raise_exception(common, new_state, NULL); 391 } 392 393 /*-------------------------------------------------------------------------*/ 394 395 static int ep0_queue(struct fsg_common *common) 396 { 397 int rc; 398 399 rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); 400 common->ep0->driver_data = common; 401 if (rc != 0 && rc != -ESHUTDOWN) { 402 /* We can't do much more than wait for a reset */ 403 WARNING(common, "error in submission: %s --> %d\n", 404 common->ep0->name, rc); 405 } 406 return rc; 407 } 408 409 410 /*-------------------------------------------------------------------------*/ 411 412 /* Completion handlers. These always run in_irq. */ 413 414 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) 415 { 416 struct fsg_common *common = ep->driver_data; 417 struct fsg_buffhd *bh = req->context; 418 419 if (req->status || req->actual != req->length) 420 DBG(common, "%s --> %d, %u/%u\n", __func__, 421 req->status, req->actual, req->length); 422 if (req->status == -ECONNRESET) /* Request was cancelled */ 423 usb_ep_fifo_flush(ep); 424 425 /* Synchronize with the smp_load_acquire() in sleep_thread() */ 426 smp_store_release(&bh->state, BUF_STATE_EMPTY); 427 wake_up(&common->io_wait); 428 } 429 430 static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) 431 { 432 struct fsg_common *common = ep->driver_data; 433 struct fsg_buffhd *bh = req->context; 434 435 dump_msg(common, "bulk-out", req->buf, req->actual); 436 if (req->status || req->actual != bh->bulk_out_intended_length) 437 DBG(common, "%s --> %d, %u/%u\n", __func__, 438 req->status, req->actual, bh->bulk_out_intended_length); 439 if (req->status == -ECONNRESET) /* Request was cancelled */ 440 usb_ep_fifo_flush(ep); 441 442 /* Synchronize with the smp_load_acquire() in sleep_thread() */ 443 smp_store_release(&bh->state, BUF_STATE_FULL); 444 wake_up(&common->io_wait); 445 } 446 447 static int _fsg_common_get_max_lun(struct fsg_common *common) 448 { 449 int i = ARRAY_SIZE(common->luns) - 1; 450 451 while (i >= 0 && !common->luns[i]) 452 --i; 453 454 return i; 455 } 456 457 static int fsg_setup(struct usb_function *f, 458 const struct usb_ctrlrequest *ctrl) 459 { 460 struct fsg_dev *fsg = fsg_from_func(f); 461 struct usb_request *req = fsg->common->ep0req; 462 u16 w_index = le16_to_cpu(ctrl->wIndex); 463 u16 w_value = le16_to_cpu(ctrl->wValue); 464 u16 w_length = le16_to_cpu(ctrl->wLength); 465 466 if (!fsg_is_set(fsg->common)) 467 return -EOPNOTSUPP; 468 469 ++fsg->common->ep0_req_tag; /* Record arrival of a new request */ 470 req->context = NULL; 471 req->length = 0; 472 dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); 473 474 switch (ctrl->bRequest) { 475 476 case US_BULK_RESET_REQUEST: 477 if (ctrl->bRequestType != 478 (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) 479 break; 480 if (w_index != fsg->interface_number || w_value != 0 || 481 w_length != 0) 482 return -EDOM; 483 484 /* 485 * Raise an exception to stop the current operation 486 * and reinitialize our state. 487 */ 488 DBG(fsg, "bulk reset request\n"); 489 raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET); 490 return USB_GADGET_DELAYED_STATUS; 491 492 case US_BULK_GET_MAX_LUN: 493 if (ctrl->bRequestType != 494 (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) 495 break; 496 if (w_index != fsg->interface_number || w_value != 0 || 497 w_length != 1) 498 return -EDOM; 499 VDBG(fsg, "get max LUN\n"); 500 *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common); 501 502 /* Respond with data/status */ 503 req->length = min_t(u16, 1, w_length); 504 return ep0_queue(fsg->common); 505 } 506 507 VDBG(fsg, 508 "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n", 509 ctrl->bRequestType, ctrl->bRequest, 510 le16_to_cpu(ctrl->wValue), w_index, w_length); 511 return -EOPNOTSUPP; 512 } 513 514 515 /*-------------------------------------------------------------------------*/ 516 517 /* All the following routines run in process context */ 518 519 /* Use this for bulk or interrupt transfers, not ep0 */ 520 static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, 521 struct usb_request *req) 522 { 523 int rc; 524 525 if (ep == fsg->bulk_in) 526 dump_msg(fsg, "bulk-in", req->buf, req->length); 527 528 rc = usb_ep_queue(ep, req, GFP_KERNEL); 529 if (rc) { 530 531 /* We can't do much more than wait for a reset */ 532 req->status = rc; 533 534 /* 535 * Note: currently the net2280 driver fails zero-length 536 * submissions if DMA is enabled. 537 */ 538 if (rc != -ESHUTDOWN && 539 !(rc == -EOPNOTSUPP && req->length == 0)) 540 WARNING(fsg, "error in submission: %s --> %d\n", 541 ep->name, rc); 542 } 543 return rc; 544 } 545 546 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh) 547 { 548 int rc; 549 550 if (!fsg_is_set(common)) 551 return false; 552 bh->state = BUF_STATE_SENDING; 553 rc = start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq); 554 if (rc) { 555 bh->state = BUF_STATE_EMPTY; 556 if (rc == -ESHUTDOWN) { 557 common->running = 0; 558 return false; 559 } 560 } 561 return true; 562 } 563 564 static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) 565 { 566 int rc; 567 568 if (!fsg_is_set(common)) 569 return false; 570 bh->state = BUF_STATE_RECEIVING; 571 rc = start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq); 572 if (rc) { 573 bh->state = BUF_STATE_FULL; 574 if (rc == -ESHUTDOWN) { 575 common->running = 0; 576 return false; 577 } 578 } 579 return true; 580 } 581 582 static int sleep_thread(struct fsg_common *common, bool can_freeze, 583 struct fsg_buffhd *bh) 584 { 585 int rc; 586 587 /* Wait until a signal arrives or bh is no longer busy */ 588 if (can_freeze) 589 /* 590 * synchronize with the smp_store_release(&bh->state) in 591 * bulk_in_complete() or bulk_out_complete() 592 */ 593 rc = wait_event_freezable(common->io_wait, 594 bh && smp_load_acquire(&bh->state) >= 595 BUF_STATE_EMPTY); 596 else 597 rc = wait_event_interruptible(common->io_wait, 598 bh && smp_load_acquire(&bh->state) >= 599 BUF_STATE_EMPTY); 600 return rc ? -EINTR : 0; 601 } 602 603 604 /*-------------------------------------------------------------------------*/ 605 606 static int do_read(struct fsg_common *common) 607 { 608 struct fsg_lun *curlun = common->curlun; 609 u64 lba; 610 struct fsg_buffhd *bh; 611 int rc; 612 u32 amount_left; 613 loff_t file_offset, file_offset_tmp; 614 unsigned int amount; 615 ssize_t nread; 616 617 /* 618 * Get the starting Logical Block Address and check that it's 619 * not too big. 620 */ 621 if (common->cmnd[0] == READ_6) 622 lba = get_unaligned_be24(&common->cmnd[1]); 623 else { 624 if (common->cmnd[0] == READ_16) 625 lba = get_unaligned_be64(&common->cmnd[2]); 626 else /* READ_10 or READ_12 */ 627 lba = get_unaligned_be32(&common->cmnd[2]); 628 629 /* 630 * We allow DPO (Disable Page Out = don't save data in the 631 * cache) and FUA (Force Unit Access = don't read from the 632 * cache), but we don't implement them. 633 */ 634 if ((common->cmnd[1] & ~0x18) != 0) { 635 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 636 return -EINVAL; 637 } 638 } 639 if (lba >= curlun->num_sectors) { 640 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 641 return -EINVAL; 642 } 643 file_offset = ((loff_t) lba) << curlun->blkbits; 644 645 /* Carry out the file reads */ 646 amount_left = common->data_size_from_cmnd; 647 if (unlikely(amount_left == 0)) 648 return -EIO; /* No default reply */ 649 650 for (;;) { 651 /* 652 * Figure out how much we need to read: 653 * Try to read the remaining amount. 654 * But don't read more than the buffer size. 655 * And don't try to read past the end of the file. 656 */ 657 amount = min(amount_left, FSG_BUFLEN); 658 amount = min_t(loff_t, amount, 659 curlun->file_length - file_offset); 660 661 /* Wait for the next buffer to become available */ 662 bh = common->next_buffhd_to_fill; 663 rc = sleep_thread(common, false, bh); 664 if (rc) 665 return rc; 666 667 /* 668 * If we were asked to read past the end of file, 669 * end with an empty buffer. 670 */ 671 if (amount == 0) { 672 curlun->sense_data = 673 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 674 curlun->sense_data_info = 675 file_offset >> curlun->blkbits; 676 curlun->info_valid = 1; 677 bh->inreq->length = 0; 678 bh->state = BUF_STATE_FULL; 679 break; 680 } 681 682 /* Perform the read */ 683 file_offset_tmp = file_offset; 684 nread = kernel_read(curlun->filp, bh->buf, amount, 685 &file_offset_tmp); 686 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, 687 (unsigned long long)file_offset, (int)nread); 688 if (signal_pending(current)) 689 return -EINTR; 690 691 if (nread < 0) { 692 LDBG(curlun, "error in file read: %d\n", (int)nread); 693 nread = 0; 694 } else if (nread < amount) { 695 LDBG(curlun, "partial file read: %d/%u\n", 696 (int)nread, amount); 697 nread = round_down(nread, curlun->blksize); 698 } 699 file_offset += nread; 700 amount_left -= nread; 701 common->residue -= nread; 702 703 /* 704 * Except at the end of the transfer, nread will be 705 * equal to the buffer size, which is divisible by the 706 * bulk-in maxpacket size. 707 */ 708 bh->inreq->length = nread; 709 bh->state = BUF_STATE_FULL; 710 711 /* If an error occurred, report it and its position */ 712 if (nread < amount) { 713 curlun->sense_data = SS_UNRECOVERED_READ_ERROR; 714 curlun->sense_data_info = 715 file_offset >> curlun->blkbits; 716 curlun->info_valid = 1; 717 break; 718 } 719 720 if (amount_left == 0) 721 break; /* No more left to read */ 722 723 /* Send this buffer and go read some more */ 724 bh->inreq->zero = 0; 725 if (!start_in_transfer(common, bh)) 726 /* Don't know what to do if common->fsg is NULL */ 727 return -EIO; 728 common->next_buffhd_to_fill = bh->next; 729 } 730 731 return -EIO; /* No default reply */ 732 } 733 734 735 /*-------------------------------------------------------------------------*/ 736 737 static int do_write(struct fsg_common *common) 738 { 739 struct fsg_lun *curlun = common->curlun; 740 u64 lba; 741 struct fsg_buffhd *bh; 742 int get_some_more; 743 u32 amount_left_to_req, amount_left_to_write; 744 loff_t usb_offset, file_offset, file_offset_tmp; 745 unsigned int amount; 746 ssize_t nwritten; 747 int rc; 748 749 if (curlun->ro) { 750 curlun->sense_data = SS_WRITE_PROTECTED; 751 return -EINVAL; 752 } 753 spin_lock(&curlun->filp->f_lock); 754 curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */ 755 spin_unlock(&curlun->filp->f_lock); 756 757 /* 758 * Get the starting Logical Block Address and check that it's 759 * not too big 760 */ 761 if (common->cmnd[0] == WRITE_6) 762 lba = get_unaligned_be24(&common->cmnd[1]); 763 else { 764 if (common->cmnd[0] == WRITE_16) 765 lba = get_unaligned_be64(&common->cmnd[2]); 766 else /* WRITE_10 or WRITE_12 */ 767 lba = get_unaligned_be32(&common->cmnd[2]); 768 769 /* 770 * We allow DPO (Disable Page Out = don't save data in the 771 * cache) and FUA (Force Unit Access = write directly to the 772 * medium). We don't implement DPO; we implement FUA by 773 * performing synchronous output. 774 */ 775 if (common->cmnd[1] & ~0x18) { 776 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 777 return -EINVAL; 778 } 779 if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */ 780 spin_lock(&curlun->filp->f_lock); 781 curlun->filp->f_flags |= O_SYNC; 782 spin_unlock(&curlun->filp->f_lock); 783 } 784 } 785 if (lba >= curlun->num_sectors) { 786 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 787 return -EINVAL; 788 } 789 790 /* Carry out the file writes */ 791 get_some_more = 1; 792 file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; 793 amount_left_to_req = common->data_size_from_cmnd; 794 amount_left_to_write = common->data_size_from_cmnd; 795 796 while (amount_left_to_write > 0) { 797 798 /* Queue a request for more data from the host */ 799 bh = common->next_buffhd_to_fill; 800 if (bh->state == BUF_STATE_EMPTY && get_some_more) { 801 802 /* 803 * Figure out how much we want to get: 804 * Try to get the remaining amount, 805 * but not more than the buffer size. 806 */ 807 amount = min(amount_left_to_req, FSG_BUFLEN); 808 809 /* Beyond the end of the backing file? */ 810 if (usb_offset >= curlun->file_length) { 811 get_some_more = 0; 812 curlun->sense_data = 813 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 814 curlun->sense_data_info = 815 usb_offset >> curlun->blkbits; 816 curlun->info_valid = 1; 817 continue; 818 } 819 820 /* Get the next buffer */ 821 usb_offset += amount; 822 common->usb_amount_left -= amount; 823 amount_left_to_req -= amount; 824 if (amount_left_to_req == 0) 825 get_some_more = 0; 826 827 /* 828 * Except at the end of the transfer, amount will be 829 * equal to the buffer size, which is divisible by 830 * the bulk-out maxpacket size. 831 */ 832 set_bulk_out_req_length(common, bh, amount); 833 if (!start_out_transfer(common, bh)) 834 /* Dunno what to do if common->fsg is NULL */ 835 return -EIO; 836 common->next_buffhd_to_fill = bh->next; 837 continue; 838 } 839 840 /* Write the received data to the backing file */ 841 bh = common->next_buffhd_to_drain; 842 if (bh->state == BUF_STATE_EMPTY && !get_some_more) 843 break; /* We stopped early */ 844 845 /* Wait for the data to be received */ 846 rc = sleep_thread(common, false, bh); 847 if (rc) 848 return rc; 849 850 common->next_buffhd_to_drain = bh->next; 851 bh->state = BUF_STATE_EMPTY; 852 853 /* Did something go wrong with the transfer? */ 854 if (bh->outreq->status != 0) { 855 curlun->sense_data = SS_COMMUNICATION_FAILURE; 856 curlun->sense_data_info = 857 file_offset >> curlun->blkbits; 858 curlun->info_valid = 1; 859 break; 860 } 861 862 amount = bh->outreq->actual; 863 if (curlun->file_length - file_offset < amount) { 864 LERROR(curlun, "write %u @ %llu beyond end %llu\n", 865 amount, (unsigned long long)file_offset, 866 (unsigned long long)curlun->file_length); 867 amount = curlun->file_length - file_offset; 868 } 869 870 /* 871 * Don't accept excess data. The spec doesn't say 872 * what to do in this case. We'll ignore the error. 873 */ 874 amount = min(amount, bh->bulk_out_intended_length); 875 876 /* Don't write a partial block */ 877 amount = round_down(amount, curlun->blksize); 878 if (amount == 0) 879 goto empty_write; 880 881 /* Perform the write */ 882 file_offset_tmp = file_offset; 883 nwritten = kernel_write(curlun->filp, bh->buf, amount, 884 &file_offset_tmp); 885 VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, 886 (unsigned long long)file_offset, (int)nwritten); 887 if (signal_pending(current)) 888 return -EINTR; /* Interrupted! */ 889 890 if (nwritten < 0) { 891 LDBG(curlun, "error in file write: %d\n", 892 (int) nwritten); 893 nwritten = 0; 894 } else if (nwritten < amount) { 895 LDBG(curlun, "partial file write: %d/%u\n", 896 (int) nwritten, amount); 897 nwritten = round_down(nwritten, curlun->blksize); 898 } 899 file_offset += nwritten; 900 amount_left_to_write -= nwritten; 901 common->residue -= nwritten; 902 903 /* If an error occurred, report it and its position */ 904 if (nwritten < amount) { 905 curlun->sense_data = SS_WRITE_ERROR; 906 curlun->sense_data_info = 907 file_offset >> curlun->blkbits; 908 curlun->info_valid = 1; 909 break; 910 } 911 912 empty_write: 913 /* Did the host decide to stop early? */ 914 if (bh->outreq->actual < bh->bulk_out_intended_length) { 915 common->short_packet_received = 1; 916 break; 917 } 918 } 919 920 return -EIO; /* No default reply */ 921 } 922 923 924 /*-------------------------------------------------------------------------*/ 925 926 static int do_synchronize_cache(struct fsg_common *common) 927 { 928 struct fsg_lun *curlun = common->curlun; 929 int rc; 930 931 /* We ignore the requested LBA and write out all file's 932 * dirty data buffers. */ 933 rc = fsg_lun_fsync_sub(curlun); 934 if (rc) 935 curlun->sense_data = SS_WRITE_ERROR; 936 return 0; 937 } 938 939 940 /*-------------------------------------------------------------------------*/ 941 942 static void invalidate_sub(struct fsg_lun *curlun) 943 { 944 struct file *filp = curlun->filp; 945 struct inode *inode = file_inode(filp); 946 unsigned long __maybe_unused rc; 947 948 rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); 949 VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); 950 } 951 952 static int do_verify(struct fsg_common *common) 953 { 954 struct fsg_lun *curlun = common->curlun; 955 u32 lba; 956 u32 verification_length; 957 struct fsg_buffhd *bh = common->next_buffhd_to_fill; 958 loff_t file_offset, file_offset_tmp; 959 u32 amount_left; 960 unsigned int amount; 961 ssize_t nread; 962 963 /* 964 * Get the starting Logical Block Address and check that it's 965 * not too big. 966 */ 967 lba = get_unaligned_be32(&common->cmnd[2]); 968 if (lba >= curlun->num_sectors) { 969 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 970 return -EINVAL; 971 } 972 973 /* 974 * We allow DPO (Disable Page Out = don't save data in the 975 * cache) but we don't implement it. 976 */ 977 if (common->cmnd[1] & ~0x10) { 978 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 979 return -EINVAL; 980 } 981 982 verification_length = get_unaligned_be16(&common->cmnd[7]); 983 if (unlikely(verification_length == 0)) 984 return -EIO; /* No default reply */ 985 986 /* Prepare to carry out the file verify */ 987 amount_left = verification_length << curlun->blkbits; 988 file_offset = ((loff_t) lba) << curlun->blkbits; 989 990 /* Write out all the dirty buffers before invalidating them */ 991 fsg_lun_fsync_sub(curlun); 992 if (signal_pending(current)) 993 return -EINTR; 994 995 invalidate_sub(curlun); 996 if (signal_pending(current)) 997 return -EINTR; 998 999 /* Just try to read the requested blocks */ 1000 while (amount_left > 0) { 1001 /* 1002 * Figure out how much we need to read: 1003 * Try to read the remaining amount, but not more than 1004 * the buffer size. 1005 * And don't try to read past the end of the file. 1006 */ 1007 amount = min(amount_left, FSG_BUFLEN); 1008 amount = min_t(loff_t, amount, 1009 curlun->file_length - file_offset); 1010 if (amount == 0) { 1011 curlun->sense_data = 1012 SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1013 curlun->sense_data_info = 1014 file_offset >> curlun->blkbits; 1015 curlun->info_valid = 1; 1016 break; 1017 } 1018 1019 /* Perform the read */ 1020 file_offset_tmp = file_offset; 1021 nread = kernel_read(curlun->filp, bh->buf, amount, 1022 &file_offset_tmp); 1023 VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, 1024 (unsigned long long) file_offset, 1025 (int) nread); 1026 if (signal_pending(current)) 1027 return -EINTR; 1028 1029 if (nread < 0) { 1030 LDBG(curlun, "error in file verify: %d\n", (int)nread); 1031 nread = 0; 1032 } else if (nread < amount) { 1033 LDBG(curlun, "partial file verify: %d/%u\n", 1034 (int)nread, amount); 1035 nread = round_down(nread, curlun->blksize); 1036 } 1037 if (nread == 0) { 1038 curlun->sense_data = SS_UNRECOVERED_READ_ERROR; 1039 curlun->sense_data_info = 1040 file_offset >> curlun->blkbits; 1041 curlun->info_valid = 1; 1042 break; 1043 } 1044 file_offset += nread; 1045 amount_left -= nread; 1046 } 1047 return 0; 1048 } 1049 1050 1051 /*-------------------------------------------------------------------------*/ 1052 1053 static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) 1054 { 1055 struct fsg_lun *curlun = common->curlun; 1056 u8 *buf = (u8 *) bh->buf; 1057 1058 if (!curlun) { /* Unsupported LUNs are okay */ 1059 common->bad_lun_okay = 1; 1060 memset(buf, 0, 36); 1061 buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */ 1062 buf[4] = 31; /* Additional length */ 1063 return 36; 1064 } 1065 1066 buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK; 1067 buf[1] = curlun->removable ? 0x80 : 0; 1068 buf[2] = 2; /* ANSI SCSI level 2 */ 1069 buf[3] = 2; /* SCSI-2 INQUIRY data format */ 1070 buf[4] = 31; /* Additional length */ 1071 buf[5] = 0; /* No special options */ 1072 buf[6] = 0; 1073 buf[7] = 0; 1074 if (curlun->inquiry_string[0]) 1075 memcpy(buf + 8, curlun->inquiry_string, 1076 sizeof(curlun->inquiry_string)); 1077 else 1078 memcpy(buf + 8, common->inquiry_string, 1079 sizeof(common->inquiry_string)); 1080 return 36; 1081 } 1082 1083 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) 1084 { 1085 struct fsg_lun *curlun = common->curlun; 1086 u8 *buf = (u8 *) bh->buf; 1087 u32 sd, sdinfo; 1088 int valid; 1089 1090 /* 1091 * From the SCSI-2 spec., section 7.9 (Unit attention condition): 1092 * 1093 * If a REQUEST SENSE command is received from an initiator 1094 * with a pending unit attention condition (before the target 1095 * generates the contingent allegiance condition), then the 1096 * target shall either: 1097 * a) report any pending sense data and preserve the unit 1098 * attention condition on the logical unit, or, 1099 * b) report the unit attention condition, may discard any 1100 * pending sense data, and clear the unit attention 1101 * condition on the logical unit for that initiator. 1102 * 1103 * FSG normally uses option a); enable this code to use option b). 1104 */ 1105 #if 0 1106 if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { 1107 curlun->sense_data = curlun->unit_attention_data; 1108 curlun->unit_attention_data = SS_NO_SENSE; 1109 } 1110 #endif 1111 1112 if (!curlun) { /* Unsupported LUNs are okay */ 1113 common->bad_lun_okay = 1; 1114 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1115 sdinfo = 0; 1116 valid = 0; 1117 } else { 1118 sd = curlun->sense_data; 1119 sdinfo = curlun->sense_data_info; 1120 valid = curlun->info_valid << 7; 1121 curlun->sense_data = SS_NO_SENSE; 1122 curlun->sense_data_info = 0; 1123 curlun->info_valid = 0; 1124 } 1125 1126 memset(buf, 0, 18); 1127 buf[0] = valid | 0x70; /* Valid, current error */ 1128 buf[2] = SK(sd); 1129 put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ 1130 buf[7] = 18 - 8; /* Additional sense length */ 1131 buf[12] = ASC(sd); 1132 buf[13] = ASCQ(sd); 1133 return 18; 1134 } 1135 1136 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) 1137 { 1138 struct fsg_lun *curlun = common->curlun; 1139 u32 lba = get_unaligned_be32(&common->cmnd[2]); 1140 int pmi = common->cmnd[8]; 1141 u8 *buf = (u8 *)bh->buf; 1142 u32 max_lba; 1143 1144 /* Check the PMI and LBA fields */ 1145 if (pmi > 1 || (pmi == 0 && lba != 0)) { 1146 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1147 return -EINVAL; 1148 } 1149 1150 if (curlun->num_sectors < 0x100000000ULL) 1151 max_lba = curlun->num_sectors - 1; 1152 else 1153 max_lba = 0xffffffff; 1154 put_unaligned_be32(max_lba, &buf[0]); /* Max logical block */ 1155 put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ 1156 return 8; 1157 } 1158 1159 static int do_read_capacity_16(struct fsg_common *common, struct fsg_buffhd *bh) 1160 { 1161 struct fsg_lun *curlun = common->curlun; 1162 u64 lba = get_unaligned_be64(&common->cmnd[2]); 1163 int pmi = common->cmnd[14]; 1164 u8 *buf = (u8 *)bh->buf; 1165 1166 /* Check the PMI and LBA fields */ 1167 if (pmi > 1 || (pmi == 0 && lba != 0)) { 1168 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1169 return -EINVAL; 1170 } 1171 1172 put_unaligned_be64(curlun->num_sectors - 1, &buf[0]); 1173 /* Max logical block */ 1174 put_unaligned_be32(curlun->blksize, &buf[8]); /* Block length */ 1175 1176 /* It is safe to keep other fields zeroed */ 1177 memset(&buf[12], 0, 32 - 12); 1178 return 32; 1179 } 1180 1181 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) 1182 { 1183 struct fsg_lun *curlun = common->curlun; 1184 int msf = common->cmnd[1] & 0x02; 1185 u32 lba = get_unaligned_be32(&common->cmnd[2]); 1186 u8 *buf = (u8 *)bh->buf; 1187 1188 if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ 1189 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1190 return -EINVAL; 1191 } 1192 if (lba >= curlun->num_sectors) { 1193 curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1194 return -EINVAL; 1195 } 1196 1197 memset(buf, 0, 8); 1198 buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ 1199 store_cdrom_address(&buf[4], msf, lba); 1200 return 8; 1201 } 1202 1203 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) 1204 { 1205 struct fsg_lun *curlun = common->curlun; 1206 int msf = common->cmnd[1] & 0x02; 1207 int start_track = common->cmnd[6]; 1208 u8 *buf = (u8 *)bh->buf; 1209 u8 format; 1210 int i, len; 1211 1212 format = common->cmnd[2] & 0xf; 1213 1214 if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ 1215 (start_track > 1 && format != 0x1)) { 1216 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1217 return -EINVAL; 1218 } 1219 1220 /* 1221 * Check if CDB is old style SFF-8020i 1222 * i.e. format is in 2 MSBs of byte 9 1223 * Mac OS-X host sends us this. 1224 */ 1225 if (format == 0) 1226 format = (common->cmnd[9] >> 6) & 0x3; 1227 1228 switch (format) { 1229 case 0: /* Formatted TOC */ 1230 case 1: /* Multi-session info */ 1231 len = 4 + 2*8; /* 4 byte header + 2 descriptors */ 1232 memset(buf, 0, len); 1233 buf[1] = len - 2; /* TOC Length excludes length field */ 1234 buf[2] = 1; /* First track number */ 1235 buf[3] = 1; /* Last track number */ 1236 buf[5] = 0x16; /* Data track, copying allowed */ 1237 buf[6] = 0x01; /* Only track is number 1 */ 1238 store_cdrom_address(&buf[8], msf, 0); 1239 1240 buf[13] = 0x16; /* Lead-out track is data */ 1241 buf[14] = 0xAA; /* Lead-out track number */ 1242 store_cdrom_address(&buf[16], msf, curlun->num_sectors); 1243 return len; 1244 1245 case 2: 1246 /* Raw TOC */ 1247 len = 4 + 3*11; /* 4 byte header + 3 descriptors */ 1248 memset(buf, 0, len); /* Header + A0, A1 & A2 descriptors */ 1249 buf[1] = len - 2; /* TOC Length excludes length field */ 1250 buf[2] = 1; /* First complete session */ 1251 buf[3] = 1; /* Last complete session */ 1252 1253 buf += 4; 1254 /* fill in A0, A1 and A2 points */ 1255 for (i = 0; i < 3; i++) { 1256 buf[0] = 1; /* Session number */ 1257 buf[1] = 0x16; /* Data track, copying allowed */ 1258 /* 2 - Track number 0 -> TOC */ 1259 buf[3] = 0xA0 + i; /* A0, A1, A2 point */ 1260 /* 4, 5, 6 - Min, sec, frame is zero */ 1261 buf[8] = 1; /* Pmin: last track number */ 1262 buf += 11; /* go to next track descriptor */ 1263 } 1264 buf -= 11; /* go back to A2 descriptor */ 1265 1266 /* For A2, 7, 8, 9, 10 - zero, Pmin, Psec, Pframe of Lead out */ 1267 store_cdrom_address(&buf[7], msf, curlun->num_sectors); 1268 return len; 1269 1270 default: 1271 /* PMA, ATIP, CD-TEXT not supported/required */ 1272 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1273 return -EINVAL; 1274 } 1275 } 1276 1277 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) 1278 { 1279 struct fsg_lun *curlun = common->curlun; 1280 int mscmnd = common->cmnd[0]; 1281 u8 *buf = (u8 *) bh->buf; 1282 u8 *buf0 = buf; 1283 int pc, page_code; 1284 int changeable_values, all_pages; 1285 int valid_page = 0; 1286 int len, limit; 1287 1288 if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ 1289 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1290 return -EINVAL; 1291 } 1292 pc = common->cmnd[2] >> 6; 1293 page_code = common->cmnd[2] & 0x3f; 1294 if (pc == 3) { 1295 curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; 1296 return -EINVAL; 1297 } 1298 changeable_values = (pc == 1); 1299 all_pages = (page_code == 0x3f); 1300 1301 /* 1302 * Write the mode parameter header. Fixed values are: default 1303 * medium type, no cache control (DPOFUA), and no block descriptors. 1304 * The only variable value is the WriteProtect bit. We will fill in 1305 * the mode data length later. 1306 */ 1307 memset(buf, 0, 8); 1308 if (mscmnd == MODE_SENSE) { 1309 buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ 1310 buf += 4; 1311 limit = 255; 1312 } else { /* MODE_SENSE_10 */ 1313 buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ 1314 buf += 8; 1315 limit = 65535; /* Should really be FSG_BUFLEN */ 1316 } 1317 1318 /* No block descriptors */ 1319 1320 /* 1321 * The mode pages, in numerical order. The only page we support 1322 * is the Caching page. 1323 */ 1324 if (page_code == 0x08 || all_pages) { 1325 valid_page = 1; 1326 buf[0] = 0x08; /* Page code */ 1327 buf[1] = 10; /* Page length */ 1328 memset(buf+2, 0, 10); /* None of the fields are changeable */ 1329 1330 if (!changeable_values) { 1331 buf[2] = 0x04; /* Write cache enable, */ 1332 /* Read cache not disabled */ 1333 /* No cache retention priorities */ 1334 put_unaligned_be16(0xffff, &buf[4]); 1335 /* Don't disable prefetch */ 1336 /* Minimum prefetch = 0 */ 1337 put_unaligned_be16(0xffff, &buf[8]); 1338 /* Maximum prefetch */ 1339 put_unaligned_be16(0xffff, &buf[10]); 1340 /* Maximum prefetch ceiling */ 1341 } 1342 buf += 12; 1343 } 1344 1345 /* 1346 * Check that a valid page was requested and the mode data length 1347 * isn't too long. 1348 */ 1349 len = buf - buf0; 1350 if (!valid_page || len > limit) { 1351 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1352 return -EINVAL; 1353 } 1354 1355 /* Store the mode data length */ 1356 if (mscmnd == MODE_SENSE) 1357 buf0[0] = len - 1; 1358 else 1359 put_unaligned_be16(len - 2, buf0); 1360 return len; 1361 } 1362 1363 static int do_start_stop(struct fsg_common *common) 1364 { 1365 struct fsg_lun *curlun = common->curlun; 1366 int loej, start; 1367 1368 if (!curlun) { 1369 return -EINVAL; 1370 } else if (!curlun->removable) { 1371 curlun->sense_data = SS_INVALID_COMMAND; 1372 return -EINVAL; 1373 } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ 1374 (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ 1375 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1376 return -EINVAL; 1377 } 1378 1379 loej = common->cmnd[4] & 0x02; 1380 start = common->cmnd[4] & 0x01; 1381 1382 /* 1383 * Our emulation doesn't support mounting; the medium is 1384 * available for use as soon as it is loaded. 1385 */ 1386 if (start) { 1387 if (!fsg_lun_is_open(curlun)) { 1388 curlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1389 return -EINVAL; 1390 } 1391 return 0; 1392 } 1393 1394 /* Are we allowed to unload the media? */ 1395 if (curlun->prevent_medium_removal) { 1396 LDBG(curlun, "unload attempt prevented\n"); 1397 curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; 1398 return -EINVAL; 1399 } 1400 1401 if (!loej) 1402 return 0; 1403 1404 up_read(&common->filesem); 1405 down_write(&common->filesem); 1406 fsg_lun_close(curlun); 1407 up_write(&common->filesem); 1408 down_read(&common->filesem); 1409 1410 return 0; 1411 } 1412 1413 static int do_prevent_allow(struct fsg_common *common) 1414 { 1415 struct fsg_lun *curlun = common->curlun; 1416 int prevent; 1417 1418 if (!common->curlun) { 1419 return -EINVAL; 1420 } else if (!common->curlun->removable) { 1421 common->curlun->sense_data = SS_INVALID_COMMAND; 1422 return -EINVAL; 1423 } 1424 1425 prevent = common->cmnd[4] & 0x01; 1426 if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ 1427 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1428 return -EINVAL; 1429 } 1430 1431 if (curlun->prevent_medium_removal && !prevent) 1432 fsg_lun_fsync_sub(curlun); 1433 curlun->prevent_medium_removal = prevent; 1434 return 0; 1435 } 1436 1437 static int do_read_format_capacities(struct fsg_common *common, 1438 struct fsg_buffhd *bh) 1439 { 1440 struct fsg_lun *curlun = common->curlun; 1441 u8 *buf = (u8 *) bh->buf; 1442 1443 buf[0] = buf[1] = buf[2] = 0; 1444 buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ 1445 buf += 4; 1446 1447 put_unaligned_be32(curlun->num_sectors, &buf[0]); 1448 /* Number of blocks */ 1449 put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ 1450 buf[4] = 0x02; /* Current capacity */ 1451 return 12; 1452 } 1453 1454 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) 1455 { 1456 struct fsg_lun *curlun = common->curlun; 1457 1458 /* We don't support MODE SELECT */ 1459 if (curlun) 1460 curlun->sense_data = SS_INVALID_COMMAND; 1461 return -EINVAL; 1462 } 1463 1464 1465 /*-------------------------------------------------------------------------*/ 1466 1467 static int halt_bulk_in_endpoint(struct fsg_dev *fsg) 1468 { 1469 int rc; 1470 1471 rc = fsg_set_halt(fsg, fsg->bulk_in); 1472 if (rc == -EAGAIN) 1473 VDBG(fsg, "delayed bulk-in endpoint halt\n"); 1474 while (rc != 0) { 1475 if (rc != -EAGAIN) { 1476 WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); 1477 rc = 0; 1478 break; 1479 } 1480 1481 /* Wait for a short time and then try again */ 1482 if (msleep_interruptible(100) != 0) 1483 return -EINTR; 1484 rc = usb_ep_set_halt(fsg->bulk_in); 1485 } 1486 return rc; 1487 } 1488 1489 static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) 1490 { 1491 int rc; 1492 1493 DBG(fsg, "bulk-in set wedge\n"); 1494 rc = usb_ep_set_wedge(fsg->bulk_in); 1495 if (rc == -EAGAIN) 1496 VDBG(fsg, "delayed bulk-in endpoint wedge\n"); 1497 while (rc != 0) { 1498 if (rc != -EAGAIN) { 1499 WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); 1500 rc = 0; 1501 break; 1502 } 1503 1504 /* Wait for a short time and then try again */ 1505 if (msleep_interruptible(100) != 0) 1506 return -EINTR; 1507 rc = usb_ep_set_wedge(fsg->bulk_in); 1508 } 1509 return rc; 1510 } 1511 1512 static int throw_away_data(struct fsg_common *common) 1513 { 1514 struct fsg_buffhd *bh, *bh2; 1515 u32 amount; 1516 int rc; 1517 1518 for (bh = common->next_buffhd_to_drain; 1519 bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; 1520 bh = common->next_buffhd_to_drain) { 1521 1522 /* Try to submit another request if we need one */ 1523 bh2 = common->next_buffhd_to_fill; 1524 if (bh2->state == BUF_STATE_EMPTY && 1525 common->usb_amount_left > 0) { 1526 amount = min(common->usb_amount_left, FSG_BUFLEN); 1527 1528 /* 1529 * Except at the end of the transfer, amount will be 1530 * equal to the buffer size, which is divisible by 1531 * the bulk-out maxpacket size. 1532 */ 1533 set_bulk_out_req_length(common, bh2, amount); 1534 if (!start_out_transfer(common, bh2)) 1535 /* Dunno what to do if common->fsg is NULL */ 1536 return -EIO; 1537 common->next_buffhd_to_fill = bh2->next; 1538 common->usb_amount_left -= amount; 1539 continue; 1540 } 1541 1542 /* Wait for the data to be received */ 1543 rc = sleep_thread(common, false, bh); 1544 if (rc) 1545 return rc; 1546 1547 /* Throw away the data in a filled buffer */ 1548 bh->state = BUF_STATE_EMPTY; 1549 common->next_buffhd_to_drain = bh->next; 1550 1551 /* A short packet or an error ends everything */ 1552 if (bh->outreq->actual < bh->bulk_out_intended_length || 1553 bh->outreq->status != 0) { 1554 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1555 return -EINTR; 1556 } 1557 } 1558 return 0; 1559 } 1560 1561 static int finish_reply(struct fsg_common *common) 1562 { 1563 struct fsg_buffhd *bh = common->next_buffhd_to_fill; 1564 int rc = 0; 1565 1566 switch (common->data_dir) { 1567 case DATA_DIR_NONE: 1568 break; /* Nothing to send */ 1569 1570 /* 1571 * If we don't know whether the host wants to read or write, 1572 * this must be CB or CBI with an unknown command. We mustn't 1573 * try to send or receive any data. So stall both bulk pipes 1574 * if we can and wait for a reset. 1575 */ 1576 case DATA_DIR_UNKNOWN: 1577 if (!common->can_stall) { 1578 /* Nothing */ 1579 } else if (fsg_is_set(common)) { 1580 fsg_set_halt(common->fsg, common->fsg->bulk_out); 1581 rc = halt_bulk_in_endpoint(common->fsg); 1582 } else { 1583 /* Don't know what to do if common->fsg is NULL */ 1584 rc = -EIO; 1585 } 1586 break; 1587 1588 /* All but the last buffer of data must have already been sent */ 1589 case DATA_DIR_TO_HOST: 1590 if (common->data_size == 0) { 1591 /* Nothing to send */ 1592 1593 /* Don't know what to do if common->fsg is NULL */ 1594 } else if (!fsg_is_set(common)) { 1595 rc = -EIO; 1596 1597 /* If there's no residue, simply send the last buffer */ 1598 } else if (common->residue == 0) { 1599 bh->inreq->zero = 0; 1600 if (!start_in_transfer(common, bh)) 1601 return -EIO; 1602 common->next_buffhd_to_fill = bh->next; 1603 1604 /* 1605 * For Bulk-only, mark the end of the data with a short 1606 * packet. If we are allowed to stall, halt the bulk-in 1607 * endpoint. (Note: This violates the Bulk-Only Transport 1608 * specification, which requires us to pad the data if we 1609 * don't halt the endpoint. Presumably nobody will mind.) 1610 */ 1611 } else { 1612 bh->inreq->zero = 1; 1613 if (!start_in_transfer(common, bh)) 1614 rc = -EIO; 1615 common->next_buffhd_to_fill = bh->next; 1616 if (common->can_stall) 1617 rc = halt_bulk_in_endpoint(common->fsg); 1618 } 1619 break; 1620 1621 /* 1622 * We have processed all we want from the data the host has sent. 1623 * There may still be outstanding bulk-out requests. 1624 */ 1625 case DATA_DIR_FROM_HOST: 1626 if (common->residue == 0) { 1627 /* Nothing to receive */ 1628 1629 /* Did the host stop sending unexpectedly early? */ 1630 } else if (common->short_packet_received) { 1631 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1632 rc = -EINTR; 1633 1634 /* 1635 * We haven't processed all the incoming data. Even though 1636 * we may be allowed to stall, doing so would cause a race. 1637 * The controller may already have ACK'ed all the remaining 1638 * bulk-out packets, in which case the host wouldn't see a 1639 * STALL. Not realizing the endpoint was halted, it wouldn't 1640 * clear the halt -- leading to problems later on. 1641 */ 1642 #if 0 1643 } else if (common->can_stall) { 1644 if (fsg_is_set(common)) 1645 fsg_set_halt(common->fsg, 1646 common->fsg->bulk_out); 1647 raise_exception(common, FSG_STATE_ABORT_BULK_OUT); 1648 rc = -EINTR; 1649 #endif 1650 1651 /* 1652 * We can't stall. Read in the excess data and throw it 1653 * all away. 1654 */ 1655 } else { 1656 rc = throw_away_data(common); 1657 } 1658 break; 1659 } 1660 return rc; 1661 } 1662 1663 static void send_status(struct fsg_common *common) 1664 { 1665 struct fsg_lun *curlun = common->curlun; 1666 struct fsg_buffhd *bh; 1667 struct bulk_cs_wrap *csw; 1668 int rc; 1669 u8 status = US_BULK_STAT_OK; 1670 u32 sd, sdinfo = 0; 1671 1672 /* Wait for the next buffer to become available */ 1673 bh = common->next_buffhd_to_fill; 1674 rc = sleep_thread(common, false, bh); 1675 if (rc) 1676 return; 1677 1678 if (curlun) { 1679 sd = curlun->sense_data; 1680 sdinfo = curlun->sense_data_info; 1681 } else if (common->bad_lun_okay) 1682 sd = SS_NO_SENSE; 1683 else 1684 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1685 1686 if (common->phase_error) { 1687 DBG(common, "sending phase-error status\n"); 1688 status = US_BULK_STAT_PHASE; 1689 sd = SS_INVALID_COMMAND; 1690 } else if (sd != SS_NO_SENSE) { 1691 DBG(common, "sending command-failure status\n"); 1692 status = US_BULK_STAT_FAIL; 1693 VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" 1694 " info x%x\n", 1695 SK(sd), ASC(sd), ASCQ(sd), sdinfo); 1696 } 1697 1698 /* Store and send the Bulk-only CSW */ 1699 csw = (void *)bh->buf; 1700 1701 csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); 1702 csw->Tag = common->tag; 1703 csw->Residue = cpu_to_le32(common->residue); 1704 csw->Status = status; 1705 1706 bh->inreq->length = US_BULK_CS_WRAP_LEN; 1707 bh->inreq->zero = 0; 1708 if (!start_in_transfer(common, bh)) 1709 /* Don't know what to do if common->fsg is NULL */ 1710 return; 1711 1712 common->next_buffhd_to_fill = bh->next; 1713 return; 1714 } 1715 1716 1717 /*-------------------------------------------------------------------------*/ 1718 1719 /* 1720 * Check whether the command is properly formed and whether its data size 1721 * and direction agree with the values we already have. 1722 */ 1723 static int check_command(struct fsg_common *common, int cmnd_size, 1724 enum data_direction data_dir, unsigned int mask, 1725 int needs_medium, const char *name) 1726 { 1727 int i; 1728 unsigned int lun = common->cmnd[1] >> 5; 1729 static const char dirletter[4] = {'u', 'o', 'i', 'n'}; 1730 char hdlen[20]; 1731 struct fsg_lun *curlun; 1732 1733 hdlen[0] = 0; 1734 if (common->data_dir != DATA_DIR_UNKNOWN) 1735 sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], 1736 common->data_size); 1737 VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", 1738 name, cmnd_size, dirletter[(int) data_dir], 1739 common->data_size_from_cmnd, common->cmnd_size, hdlen); 1740 1741 /* 1742 * We can't reply at all until we know the correct data direction 1743 * and size. 1744 */ 1745 if (common->data_size_from_cmnd == 0) 1746 data_dir = DATA_DIR_NONE; 1747 if (common->data_size < common->data_size_from_cmnd) { 1748 /* 1749 * Host data size < Device data size is a phase error. 1750 * Carry out the command, but only transfer as much as 1751 * we are allowed. 1752 */ 1753 common->data_size_from_cmnd = common->data_size; 1754 common->phase_error = 1; 1755 } 1756 common->residue = common->data_size; 1757 common->usb_amount_left = common->data_size; 1758 1759 /* Conflicting data directions is a phase error */ 1760 if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) { 1761 common->phase_error = 1; 1762 return -EINVAL; 1763 } 1764 1765 /* Verify the length of the command itself */ 1766 if (cmnd_size != common->cmnd_size) { 1767 1768 /* 1769 * Special case workaround: There are plenty of buggy SCSI 1770 * implementations. Many have issues with cbw->Length 1771 * field passing a wrong command size. For those cases we 1772 * always try to work around the problem by using the length 1773 * sent by the host side provided it is at least as large 1774 * as the correct command length. 1775 * Examples of such cases would be MS-Windows, which issues 1776 * REQUEST SENSE with cbw->Length == 12 where it should 1777 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and 1778 * REQUEST SENSE with cbw->Length == 10 where it should 1779 * be 6 as well. 1780 */ 1781 if (cmnd_size <= common->cmnd_size) { 1782 DBG(common, "%s is buggy! Expected length %d " 1783 "but we got %d\n", name, 1784 cmnd_size, common->cmnd_size); 1785 cmnd_size = common->cmnd_size; 1786 } else { 1787 common->phase_error = 1; 1788 return -EINVAL; 1789 } 1790 } 1791 1792 /* Check that the LUN values are consistent */ 1793 if (common->lun != lun) 1794 DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n", 1795 common->lun, lun); 1796 1797 /* Check the LUN */ 1798 curlun = common->curlun; 1799 if (curlun) { 1800 if (common->cmnd[0] != REQUEST_SENSE) { 1801 curlun->sense_data = SS_NO_SENSE; 1802 curlun->sense_data_info = 0; 1803 curlun->info_valid = 0; 1804 } 1805 } else { 1806 common->bad_lun_okay = 0; 1807 1808 /* 1809 * INQUIRY and REQUEST SENSE commands are explicitly allowed 1810 * to use unsupported LUNs; all others may not. 1811 */ 1812 if (common->cmnd[0] != INQUIRY && 1813 common->cmnd[0] != REQUEST_SENSE) { 1814 DBG(common, "unsupported LUN %u\n", common->lun); 1815 return -EINVAL; 1816 } 1817 } 1818 1819 /* 1820 * If a unit attention condition exists, only INQUIRY and 1821 * REQUEST SENSE commands are allowed; anything else must fail. 1822 */ 1823 if (curlun && curlun->unit_attention_data != SS_NO_SENSE && 1824 common->cmnd[0] != INQUIRY && 1825 common->cmnd[0] != REQUEST_SENSE) { 1826 curlun->sense_data = curlun->unit_attention_data; 1827 curlun->unit_attention_data = SS_NO_SENSE; 1828 return -EINVAL; 1829 } 1830 1831 /* Check that only command bytes listed in the mask are non-zero */ 1832 common->cmnd[1] &= 0x1f; /* Mask away the LUN */ 1833 for (i = 1; i < cmnd_size; ++i) { 1834 if (common->cmnd[i] && !(mask & (1 << i))) { 1835 if (curlun) 1836 curlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1837 return -EINVAL; 1838 } 1839 } 1840 1841 /* If the medium isn't mounted and the command needs to access 1842 * it, return an error. */ 1843 if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { 1844 curlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1845 return -EINVAL; 1846 } 1847 1848 return 0; 1849 } 1850 1851 /* wrapper of check_command for data size in blocks handling */ 1852 static int check_command_size_in_blocks(struct fsg_common *common, 1853 int cmnd_size, enum data_direction data_dir, 1854 unsigned int mask, int needs_medium, const char *name) 1855 { 1856 if (common->curlun) { 1857 if (check_shl_overflow(common->data_size_from_cmnd, 1858 common->curlun->blkbits, 1859 &common->data_size_from_cmnd)) { 1860 common->phase_error = 1; 1861 return -EINVAL; 1862 } 1863 } 1864 1865 return check_command(common, cmnd_size, data_dir, 1866 mask, needs_medium, name); 1867 } 1868 1869 static int do_scsi_command(struct fsg_common *common) 1870 { 1871 struct fsg_buffhd *bh; 1872 int rc; 1873 int reply = -EINVAL; 1874 int i; 1875 static char unknown[16]; 1876 1877 dump_cdb(common); 1878 1879 /* Wait for the next buffer to become available for data or status */ 1880 bh = common->next_buffhd_to_fill; 1881 common->next_buffhd_to_drain = bh; 1882 rc = sleep_thread(common, false, bh); 1883 if (rc) 1884 return rc; 1885 1886 common->phase_error = 0; 1887 common->short_packet_received = 0; 1888 1889 down_read(&common->filesem); /* We're using the backing file */ 1890 switch (common->cmnd[0]) { 1891 1892 case INQUIRY: 1893 common->data_size_from_cmnd = common->cmnd[4]; 1894 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1895 (1<<4), 0, 1896 "INQUIRY"); 1897 if (reply == 0) 1898 reply = do_inquiry(common, bh); 1899 break; 1900 1901 case MODE_SELECT: 1902 common->data_size_from_cmnd = common->cmnd[4]; 1903 reply = check_command(common, 6, DATA_DIR_FROM_HOST, 1904 (1<<1) | (1<<4), 0, 1905 "MODE SELECT(6)"); 1906 if (reply == 0) 1907 reply = do_mode_select(common, bh); 1908 break; 1909 1910 case MODE_SELECT_10: 1911 common->data_size_from_cmnd = 1912 get_unaligned_be16(&common->cmnd[7]); 1913 reply = check_command(common, 10, DATA_DIR_FROM_HOST, 1914 (1<<1) | (3<<7), 0, 1915 "MODE SELECT(10)"); 1916 if (reply == 0) 1917 reply = do_mode_select(common, bh); 1918 break; 1919 1920 case MODE_SENSE: 1921 common->data_size_from_cmnd = common->cmnd[4]; 1922 reply = check_command(common, 6, DATA_DIR_TO_HOST, 1923 (1<<1) | (1<<2) | (1<<4), 0, 1924 "MODE SENSE(6)"); 1925 if (reply == 0) 1926 reply = do_mode_sense(common, bh); 1927 break; 1928 1929 case MODE_SENSE_10: 1930 common->data_size_from_cmnd = 1931 get_unaligned_be16(&common->cmnd[7]); 1932 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1933 (1<<1) | (1<<2) | (3<<7), 0, 1934 "MODE SENSE(10)"); 1935 if (reply == 0) 1936 reply = do_mode_sense(common, bh); 1937 break; 1938 1939 case ALLOW_MEDIUM_REMOVAL: 1940 common->data_size_from_cmnd = 0; 1941 reply = check_command(common, 6, DATA_DIR_NONE, 1942 (1<<4), 0, 1943 "PREVENT-ALLOW MEDIUM REMOVAL"); 1944 if (reply == 0) 1945 reply = do_prevent_allow(common); 1946 break; 1947 1948 case READ_6: 1949 i = common->cmnd[4]; 1950 common->data_size_from_cmnd = (i == 0) ? 256 : i; 1951 reply = check_command_size_in_blocks(common, 6, 1952 DATA_DIR_TO_HOST, 1953 (7<<1) | (1<<4), 1, 1954 "READ(6)"); 1955 if (reply == 0) 1956 reply = do_read(common); 1957 break; 1958 1959 case READ_10: 1960 common->data_size_from_cmnd = 1961 get_unaligned_be16(&common->cmnd[7]); 1962 reply = check_command_size_in_blocks(common, 10, 1963 DATA_DIR_TO_HOST, 1964 (1<<1) | (0xf<<2) | (3<<7), 1, 1965 "READ(10)"); 1966 if (reply == 0) 1967 reply = do_read(common); 1968 break; 1969 1970 case READ_12: 1971 common->data_size_from_cmnd = 1972 get_unaligned_be32(&common->cmnd[6]); 1973 reply = check_command_size_in_blocks(common, 12, 1974 DATA_DIR_TO_HOST, 1975 (1<<1) | (0xf<<2) | (0xf<<6), 1, 1976 "READ(12)"); 1977 if (reply == 0) 1978 reply = do_read(common); 1979 break; 1980 1981 case READ_16: 1982 common->data_size_from_cmnd = 1983 get_unaligned_be32(&common->cmnd[10]); 1984 reply = check_command_size_in_blocks(common, 16, 1985 DATA_DIR_TO_HOST, 1986 (1<<1) | (0xff<<2) | (0xf<<10), 1, 1987 "READ(16)"); 1988 if (reply == 0) 1989 reply = do_read(common); 1990 break; 1991 1992 case READ_CAPACITY: 1993 common->data_size_from_cmnd = 8; 1994 reply = check_command(common, 10, DATA_DIR_TO_HOST, 1995 (0xf<<2) | (1<<8), 1, 1996 "READ CAPACITY"); 1997 if (reply == 0) 1998 reply = do_read_capacity(common, bh); 1999 break; 2000 2001 case READ_HEADER: 2002 if (!common->curlun || !common->curlun->cdrom) 2003 goto unknown_cmnd; 2004 common->data_size_from_cmnd = 2005 get_unaligned_be16(&common->cmnd[7]); 2006 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2007 (3<<7) | (0x1f<<1), 1, 2008 "READ HEADER"); 2009 if (reply == 0) 2010 reply = do_read_header(common, bh); 2011 break; 2012 2013 case READ_TOC: 2014 if (!common->curlun || !common->curlun->cdrom) 2015 goto unknown_cmnd; 2016 common->data_size_from_cmnd = 2017 get_unaligned_be16(&common->cmnd[7]); 2018 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2019 (0xf<<6) | (3<<1), 1, 2020 "READ TOC"); 2021 if (reply == 0) 2022 reply = do_read_toc(common, bh); 2023 break; 2024 2025 case READ_FORMAT_CAPACITIES: 2026 common->data_size_from_cmnd = 2027 get_unaligned_be16(&common->cmnd[7]); 2028 reply = check_command(common, 10, DATA_DIR_TO_HOST, 2029 (3<<7), 1, 2030 "READ FORMAT CAPACITIES"); 2031 if (reply == 0) 2032 reply = do_read_format_capacities(common, bh); 2033 break; 2034 2035 case REQUEST_SENSE: 2036 common->data_size_from_cmnd = common->cmnd[4]; 2037 reply = check_command(common, 6, DATA_DIR_TO_HOST, 2038 (1<<4), 0, 2039 "REQUEST SENSE"); 2040 if (reply == 0) 2041 reply = do_request_sense(common, bh); 2042 break; 2043 2044 case SERVICE_ACTION_IN_16: 2045 switch (common->cmnd[1] & 0x1f) { 2046 2047 case SAI_READ_CAPACITY_16: 2048 common->data_size_from_cmnd = 2049 get_unaligned_be32(&common->cmnd[10]); 2050 reply = check_command(common, 16, DATA_DIR_TO_HOST, 2051 (1<<1) | (0xff<<2) | (0xf<<10) | 2052 (1<<14), 1, 2053 "READ CAPACITY(16)"); 2054 if (reply == 0) 2055 reply = do_read_capacity_16(common, bh); 2056 break; 2057 2058 default: 2059 goto unknown_cmnd; 2060 } 2061 break; 2062 2063 case START_STOP: 2064 common->data_size_from_cmnd = 0; 2065 reply = check_command(common, 6, DATA_DIR_NONE, 2066 (1<<1) | (1<<4), 0, 2067 "START-STOP UNIT"); 2068 if (reply == 0) 2069 reply = do_start_stop(common); 2070 break; 2071 2072 case SYNCHRONIZE_CACHE: 2073 common->data_size_from_cmnd = 0; 2074 reply = check_command(common, 10, DATA_DIR_NONE, 2075 (0xf<<2) | (3<<7), 1, 2076 "SYNCHRONIZE CACHE"); 2077 if (reply == 0) 2078 reply = do_synchronize_cache(common); 2079 break; 2080 2081 case TEST_UNIT_READY: 2082 common->data_size_from_cmnd = 0; 2083 reply = check_command(common, 6, DATA_DIR_NONE, 2084 0, 1, 2085 "TEST UNIT READY"); 2086 break; 2087 2088 /* 2089 * Although optional, this command is used by MS-Windows. We 2090 * support a minimal version: BytChk must be 0. 2091 */ 2092 case VERIFY: 2093 common->data_size_from_cmnd = 0; 2094 reply = check_command(common, 10, DATA_DIR_NONE, 2095 (1<<1) | (0xf<<2) | (3<<7), 1, 2096 "VERIFY"); 2097 if (reply == 0) 2098 reply = do_verify(common); 2099 break; 2100 2101 case WRITE_6: 2102 i = common->cmnd[4]; 2103 common->data_size_from_cmnd = (i == 0) ? 256 : i; 2104 reply = check_command_size_in_blocks(common, 6, 2105 DATA_DIR_FROM_HOST, 2106 (7<<1) | (1<<4), 1, 2107 "WRITE(6)"); 2108 if (reply == 0) 2109 reply = do_write(common); 2110 break; 2111 2112 case WRITE_10: 2113 common->data_size_from_cmnd = 2114 get_unaligned_be16(&common->cmnd[7]); 2115 reply = check_command_size_in_blocks(common, 10, 2116 DATA_DIR_FROM_HOST, 2117 (1<<1) | (0xf<<2) | (3<<7), 1, 2118 "WRITE(10)"); 2119 if (reply == 0) 2120 reply = do_write(common); 2121 break; 2122 2123 case WRITE_12: 2124 common->data_size_from_cmnd = 2125 get_unaligned_be32(&common->cmnd[6]); 2126 reply = check_command_size_in_blocks(common, 12, 2127 DATA_DIR_FROM_HOST, 2128 (1<<1) | (0xf<<2) | (0xf<<6), 1, 2129 "WRITE(12)"); 2130 if (reply == 0) 2131 reply = do_write(common); 2132 break; 2133 2134 case WRITE_16: 2135 common->data_size_from_cmnd = 2136 get_unaligned_be32(&common->cmnd[10]); 2137 reply = check_command_size_in_blocks(common, 16, 2138 DATA_DIR_FROM_HOST, 2139 (1<<1) | (0xff<<2) | (0xf<<10), 1, 2140 "WRITE(16)"); 2141 if (reply == 0) 2142 reply = do_write(common); 2143 break; 2144 2145 /* 2146 * Some mandatory commands that we recognize but don't implement. 2147 * They don't mean much in this setting. It's left as an exercise 2148 * for anyone interested to implement RESERVE and RELEASE in terms 2149 * of Posix locks. 2150 */ 2151 case FORMAT_UNIT: 2152 case RELEASE_6: 2153 case RESERVE_6: 2154 case SEND_DIAGNOSTIC: 2155 2156 default: 2157 unknown_cmnd: 2158 common->data_size_from_cmnd = 0; 2159 sprintf(unknown, "Unknown x%02x", common->cmnd[0]); 2160 reply = check_command(common, common->cmnd_size, 2161 DATA_DIR_UNKNOWN, ~0, 0, unknown); 2162 if (reply == 0) { 2163 common->curlun->sense_data = SS_INVALID_COMMAND; 2164 reply = -EINVAL; 2165 } 2166 break; 2167 } 2168 up_read(&common->filesem); 2169 2170 if (reply == -EINTR || signal_pending(current)) 2171 return -EINTR; 2172 2173 /* Set up the single reply buffer for finish_reply() */ 2174 if (reply == -EINVAL) 2175 reply = 0; /* Error reply length */ 2176 if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { 2177 reply = min_t(u32, reply, common->data_size_from_cmnd); 2178 bh->inreq->length = reply; 2179 bh->state = BUF_STATE_FULL; 2180 common->residue -= reply; 2181 } /* Otherwise it's already set */ 2182 2183 return 0; 2184 } 2185 2186 2187 /*-------------------------------------------------------------------------*/ 2188 2189 static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) 2190 { 2191 struct usb_request *req = bh->outreq; 2192 struct bulk_cb_wrap *cbw = req->buf; 2193 struct fsg_common *common = fsg->common; 2194 2195 /* Was this a real packet? Should it be ignored? */ 2196 if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) 2197 return -EINVAL; 2198 2199 /* Is the CBW valid? */ 2200 if (req->actual != US_BULK_CB_WRAP_LEN || 2201 cbw->Signature != cpu_to_le32( 2202 US_BULK_CB_SIGN)) { 2203 DBG(fsg, "invalid CBW: len %u sig 0x%x\n", 2204 req->actual, 2205 le32_to_cpu(cbw->Signature)); 2206 2207 /* 2208 * The Bulk-only spec says we MUST stall the IN endpoint 2209 * (6.6.1), so it's unavoidable. It also says we must 2210 * retain this state until the next reset, but there's 2211 * no way to tell the controller driver it should ignore 2212 * Clear-Feature(HALT) requests. 2213 * 2214 * We aren't required to halt the OUT endpoint; instead 2215 * we can simply accept and discard any data received 2216 * until the next reset. 2217 */ 2218 wedge_bulk_in_endpoint(fsg); 2219 set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); 2220 return -EINVAL; 2221 } 2222 2223 /* Is the CBW meaningful? */ 2224 if (cbw->Lun >= ARRAY_SIZE(common->luns) || 2225 cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 || 2226 cbw->Length > MAX_COMMAND_SIZE) { 2227 DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " 2228 "cmdlen %u\n", 2229 cbw->Lun, cbw->Flags, cbw->Length); 2230 2231 /* 2232 * We can do anything we want here, so let's stall the 2233 * bulk pipes if we are allowed to. 2234 */ 2235 if (common->can_stall) { 2236 fsg_set_halt(fsg, fsg->bulk_out); 2237 halt_bulk_in_endpoint(fsg); 2238 } 2239 return -EINVAL; 2240 } 2241 2242 /* Save the command for later */ 2243 common->cmnd_size = cbw->Length; 2244 memcpy(common->cmnd, cbw->CDB, common->cmnd_size); 2245 if (cbw->Flags & US_BULK_FLAG_IN) 2246 common->data_dir = DATA_DIR_TO_HOST; 2247 else 2248 common->data_dir = DATA_DIR_FROM_HOST; 2249 common->data_size = le32_to_cpu(cbw->DataTransferLength); 2250 if (common->data_size == 0) 2251 common->data_dir = DATA_DIR_NONE; 2252 common->lun = cbw->Lun; 2253 if (common->lun < ARRAY_SIZE(common->luns)) 2254 common->curlun = common->luns[common->lun]; 2255 else 2256 common->curlun = NULL; 2257 common->tag = cbw->Tag; 2258 return 0; 2259 } 2260 2261 static int get_next_command(struct fsg_common *common) 2262 { 2263 struct fsg_buffhd *bh; 2264 int rc = 0; 2265 2266 /* Wait for the next buffer to become available */ 2267 bh = common->next_buffhd_to_fill; 2268 rc = sleep_thread(common, true, bh); 2269 if (rc) 2270 return rc; 2271 2272 /* Queue a request to read a Bulk-only CBW */ 2273 set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN); 2274 if (!start_out_transfer(common, bh)) 2275 /* Don't know what to do if common->fsg is NULL */ 2276 return -EIO; 2277 2278 /* 2279 * We will drain the buffer in software, which means we 2280 * can reuse it for the next filling. No need to advance 2281 * next_buffhd_to_fill. 2282 */ 2283 2284 /* Wait for the CBW to arrive */ 2285 rc = sleep_thread(common, true, bh); 2286 if (rc) 2287 return rc; 2288 2289 rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; 2290 bh->state = BUF_STATE_EMPTY; 2291 2292 return rc; 2293 } 2294 2295 2296 /*-------------------------------------------------------------------------*/ 2297 2298 static int alloc_request(struct fsg_common *common, struct usb_ep *ep, 2299 struct usb_request **preq) 2300 { 2301 *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); 2302 if (*preq) 2303 return 0; 2304 ERROR(common, "can't allocate request for %s\n", ep->name); 2305 return -ENOMEM; 2306 } 2307 2308 /* Reset interface setting and re-init endpoint state (toggle etc). */ 2309 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) 2310 { 2311 struct fsg_dev *fsg; 2312 int i, rc = 0; 2313 2314 if (common->running) 2315 DBG(common, "reset interface\n"); 2316 2317 reset: 2318 /* Deallocate the requests */ 2319 if (common->fsg) { 2320 fsg = common->fsg; 2321 2322 for (i = 0; i < common->fsg_num_buffers; ++i) { 2323 struct fsg_buffhd *bh = &common->buffhds[i]; 2324 2325 if (bh->inreq) { 2326 usb_ep_free_request(fsg->bulk_in, bh->inreq); 2327 bh->inreq = NULL; 2328 } 2329 if (bh->outreq) { 2330 usb_ep_free_request(fsg->bulk_out, bh->outreq); 2331 bh->outreq = NULL; 2332 } 2333 } 2334 2335 /* Disable the endpoints */ 2336 if (fsg->bulk_in_enabled) { 2337 usb_ep_disable(fsg->bulk_in); 2338 fsg->bulk_in_enabled = 0; 2339 } 2340 if (fsg->bulk_out_enabled) { 2341 usb_ep_disable(fsg->bulk_out); 2342 fsg->bulk_out_enabled = 0; 2343 } 2344 2345 common->fsg = NULL; 2346 wake_up(&common->fsg_wait); 2347 } 2348 2349 common->running = 0; 2350 if (!new_fsg || rc) 2351 return rc; 2352 2353 common->fsg = new_fsg; 2354 fsg = common->fsg; 2355 2356 /* Enable the endpoints */ 2357 rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in); 2358 if (rc) 2359 goto reset; 2360 rc = usb_ep_enable(fsg->bulk_in); 2361 if (rc) 2362 goto reset; 2363 fsg->bulk_in->driver_data = common; 2364 fsg->bulk_in_enabled = 1; 2365 2366 rc = config_ep_by_speed(common->gadget, &(fsg->function), 2367 fsg->bulk_out); 2368 if (rc) 2369 goto reset; 2370 rc = usb_ep_enable(fsg->bulk_out); 2371 if (rc) 2372 goto reset; 2373 fsg->bulk_out->driver_data = common; 2374 fsg->bulk_out_enabled = 1; 2375 common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); 2376 clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); 2377 2378 /* Allocate the requests */ 2379 for (i = 0; i < common->fsg_num_buffers; ++i) { 2380 struct fsg_buffhd *bh = &common->buffhds[i]; 2381 2382 rc = alloc_request(common, fsg->bulk_in, &bh->inreq); 2383 if (rc) 2384 goto reset; 2385 rc = alloc_request(common, fsg->bulk_out, &bh->outreq); 2386 if (rc) 2387 goto reset; 2388 bh->inreq->buf = bh->outreq->buf = bh->buf; 2389 bh->inreq->context = bh->outreq->context = bh; 2390 bh->inreq->complete = bulk_in_complete; 2391 bh->outreq->complete = bulk_out_complete; 2392 } 2393 2394 common->running = 1; 2395 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) 2396 if (common->luns[i]) 2397 common->luns[i]->unit_attention_data = 2398 SS_RESET_OCCURRED; 2399 return rc; 2400 } 2401 2402 2403 /****************************** ALT CONFIGS ******************************/ 2404 2405 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) 2406 { 2407 struct fsg_dev *fsg = fsg_from_func(f); 2408 2409 __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg); 2410 return USB_GADGET_DELAYED_STATUS; 2411 } 2412 2413 static void fsg_disable(struct usb_function *f) 2414 { 2415 struct fsg_dev *fsg = fsg_from_func(f); 2416 2417 /* Disable the endpoints */ 2418 if (fsg->bulk_in_enabled) { 2419 usb_ep_disable(fsg->bulk_in); 2420 fsg->bulk_in_enabled = 0; 2421 } 2422 if (fsg->bulk_out_enabled) { 2423 usb_ep_disable(fsg->bulk_out); 2424 fsg->bulk_out_enabled = 0; 2425 } 2426 2427 __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); 2428 } 2429 2430 2431 /*-------------------------------------------------------------------------*/ 2432 2433 static void handle_exception(struct fsg_common *common) 2434 { 2435 int i; 2436 struct fsg_buffhd *bh; 2437 enum fsg_state old_state; 2438 struct fsg_lun *curlun; 2439 unsigned int exception_req_tag; 2440 struct fsg_dev *new_fsg; 2441 2442 /* 2443 * Clear the existing signals. Anything but SIGUSR1 is converted 2444 * into a high-priority EXIT exception. 2445 */ 2446 for (;;) { 2447 int sig = kernel_dequeue_signal(); 2448 if (!sig) 2449 break; 2450 if (sig != SIGUSR1) { 2451 spin_lock_irq(&common->lock); 2452 if (common->state < FSG_STATE_EXIT) 2453 DBG(common, "Main thread exiting on signal\n"); 2454 common->state = FSG_STATE_EXIT; 2455 spin_unlock_irq(&common->lock); 2456 } 2457 } 2458 2459 /* Cancel all the pending transfers */ 2460 if (likely(common->fsg)) { 2461 for (i = 0; i < common->fsg_num_buffers; ++i) { 2462 bh = &common->buffhds[i]; 2463 if (bh->state == BUF_STATE_SENDING) 2464 usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); 2465 if (bh->state == BUF_STATE_RECEIVING) 2466 usb_ep_dequeue(common->fsg->bulk_out, 2467 bh->outreq); 2468 2469 /* Wait for a transfer to become idle */ 2470 if (sleep_thread(common, false, bh)) 2471 return; 2472 } 2473 2474 /* Clear out the controller's fifos */ 2475 if (common->fsg->bulk_in_enabled) 2476 usb_ep_fifo_flush(common->fsg->bulk_in); 2477 if (common->fsg->bulk_out_enabled) 2478 usb_ep_fifo_flush(common->fsg->bulk_out); 2479 } 2480 2481 /* 2482 * Reset the I/O buffer states and pointers, the SCSI 2483 * state, and the exception. Then invoke the handler. 2484 */ 2485 spin_lock_irq(&common->lock); 2486 2487 for (i = 0; i < common->fsg_num_buffers; ++i) { 2488 bh = &common->buffhds[i]; 2489 bh->state = BUF_STATE_EMPTY; 2490 } 2491 common->next_buffhd_to_fill = &common->buffhds[0]; 2492 common->next_buffhd_to_drain = &common->buffhds[0]; 2493 exception_req_tag = common->exception_req_tag; 2494 new_fsg = common->exception_arg; 2495 old_state = common->state; 2496 common->state = FSG_STATE_NORMAL; 2497 2498 if (old_state != FSG_STATE_ABORT_BULK_OUT) { 2499 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { 2500 curlun = common->luns[i]; 2501 if (!curlun) 2502 continue; 2503 curlun->prevent_medium_removal = 0; 2504 curlun->sense_data = SS_NO_SENSE; 2505 curlun->unit_attention_data = SS_NO_SENSE; 2506 curlun->sense_data_info = 0; 2507 curlun->info_valid = 0; 2508 } 2509 } 2510 spin_unlock_irq(&common->lock); 2511 2512 /* Carry out any extra actions required for the exception */ 2513 switch (old_state) { 2514 case FSG_STATE_NORMAL: 2515 break; 2516 2517 case FSG_STATE_ABORT_BULK_OUT: 2518 send_status(common); 2519 break; 2520 2521 case FSG_STATE_PROTOCOL_RESET: 2522 /* 2523 * In case we were forced against our will to halt a 2524 * bulk endpoint, clear the halt now. (The SuperH UDC 2525 * requires this.) 2526 */ 2527 if (!fsg_is_set(common)) 2528 break; 2529 if (test_and_clear_bit(IGNORE_BULK_OUT, 2530 &common->fsg->atomic_bitflags)) 2531 usb_ep_clear_halt(common->fsg->bulk_in); 2532 2533 if (common->ep0_req_tag == exception_req_tag) 2534 ep0_queue(common); /* Complete the status stage */ 2535 2536 /* 2537 * Technically this should go here, but it would only be 2538 * a waste of time. Ditto for the INTERFACE_CHANGE and 2539 * CONFIG_CHANGE cases. 2540 */ 2541 /* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */ 2542 /* if (common->luns[i]) */ 2543 /* common->luns[i]->unit_attention_data = */ 2544 /* SS_RESET_OCCURRED; */ 2545 break; 2546 2547 case FSG_STATE_CONFIG_CHANGE: 2548 do_set_interface(common, new_fsg); 2549 if (new_fsg) 2550 usb_composite_setup_continue(common->cdev); 2551 break; 2552 2553 case FSG_STATE_EXIT: 2554 do_set_interface(common, NULL); /* Free resources */ 2555 spin_lock_irq(&common->lock); 2556 common->state = FSG_STATE_TERMINATED; /* Stop the thread */ 2557 spin_unlock_irq(&common->lock); 2558 break; 2559 2560 case FSG_STATE_TERMINATED: 2561 break; 2562 } 2563 } 2564 2565 2566 /*-------------------------------------------------------------------------*/ 2567 2568 static int fsg_main_thread(void *common_) 2569 { 2570 struct fsg_common *common = common_; 2571 int i; 2572 2573 /* 2574 * Allow the thread to be killed by a signal, but set the signal mask 2575 * to block everything but INT, TERM, KILL, and USR1. 2576 */ 2577 allow_signal(SIGINT); 2578 allow_signal(SIGTERM); 2579 allow_signal(SIGKILL); 2580 allow_signal(SIGUSR1); 2581 2582 /* Allow the thread to be frozen */ 2583 set_freezable(); 2584 2585 /* The main loop */ 2586 while (common->state != FSG_STATE_TERMINATED) { 2587 if (exception_in_progress(common) || signal_pending(current)) { 2588 handle_exception(common); 2589 continue; 2590 } 2591 2592 if (!common->running) { 2593 sleep_thread(common, true, NULL); 2594 continue; 2595 } 2596 2597 if (get_next_command(common) || exception_in_progress(common)) 2598 continue; 2599 if (do_scsi_command(common) || exception_in_progress(common)) 2600 continue; 2601 if (finish_reply(common) || exception_in_progress(common)) 2602 continue; 2603 send_status(common); 2604 } 2605 2606 spin_lock_irq(&common->lock); 2607 common->thread_task = NULL; 2608 spin_unlock_irq(&common->lock); 2609 2610 /* Eject media from all LUNs */ 2611 2612 down_write(&common->filesem); 2613 for (i = 0; i < ARRAY_SIZE(common->luns); i++) { 2614 struct fsg_lun *curlun = common->luns[i]; 2615 2616 if (curlun && fsg_lun_is_open(curlun)) 2617 fsg_lun_close(curlun); 2618 } 2619 up_write(&common->filesem); 2620 2621 /* Let fsg_unbind() know the thread has exited */ 2622 kthread_complete_and_exit(&common->thread_notifier, 0); 2623 } 2624 2625 2626 /*************************** DEVICE ATTRIBUTES ***************************/ 2627 2628 static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf) 2629 { 2630 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2631 2632 return fsg_show_ro(curlun, buf); 2633 } 2634 2635 static ssize_t nofua_show(struct device *dev, struct device_attribute *attr, 2636 char *buf) 2637 { 2638 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2639 2640 return fsg_show_nofua(curlun, buf); 2641 } 2642 2643 static ssize_t file_show(struct device *dev, struct device_attribute *attr, 2644 char *buf) 2645 { 2646 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2647 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2648 2649 return fsg_show_file(curlun, filesem, buf); 2650 } 2651 2652 static ssize_t ro_store(struct device *dev, struct device_attribute *attr, 2653 const char *buf, size_t count) 2654 { 2655 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2656 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2657 2658 return fsg_store_ro(curlun, filesem, buf, count); 2659 } 2660 2661 static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, 2662 const char *buf, size_t count) 2663 { 2664 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2665 2666 return fsg_store_nofua(curlun, buf, count); 2667 } 2668 2669 static ssize_t file_store(struct device *dev, struct device_attribute *attr, 2670 const char *buf, size_t count) 2671 { 2672 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2673 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2674 2675 return fsg_store_file(curlun, filesem, buf, count); 2676 } 2677 2678 static ssize_t forced_eject_store(struct device *dev, 2679 struct device_attribute *attr, 2680 const char *buf, size_t count) 2681 { 2682 struct fsg_lun *curlun = fsg_lun_from_dev(dev); 2683 struct rw_semaphore *filesem = dev_get_drvdata(dev); 2684 2685 return fsg_store_forced_eject(curlun, filesem, buf, count); 2686 } 2687 2688 static DEVICE_ATTR_RW(nofua); 2689 static DEVICE_ATTR_WO(forced_eject); 2690 2691 /* 2692 * Mode of the ro and file attribute files will be overridden in 2693 * fsg_lun_dev_is_visible() depending on if this is a cdrom, or if it is a 2694 * removable device. 2695 */ 2696 static DEVICE_ATTR_RW(ro); 2697 static DEVICE_ATTR_RW(file); 2698 2699 /****************************** FSG COMMON ******************************/ 2700 2701 static void fsg_lun_release(struct device *dev) 2702 { 2703 /* Nothing needs to be done */ 2704 } 2705 2706 static struct fsg_common *fsg_common_setup(struct fsg_common *common) 2707 { 2708 if (!common) { 2709 common = kzalloc_obj(*common); 2710 if (!common) 2711 return ERR_PTR(-ENOMEM); 2712 common->free_storage_on_release = 1; 2713 } else { 2714 common->free_storage_on_release = 0; 2715 } 2716 init_rwsem(&common->filesem); 2717 spin_lock_init(&common->lock); 2718 init_completion(&common->thread_notifier); 2719 init_waitqueue_head(&common->io_wait); 2720 init_waitqueue_head(&common->fsg_wait); 2721 common->state = FSG_STATE_TERMINATED; 2722 memset(common->luns, 0, sizeof(common->luns)); 2723 2724 return common; 2725 } 2726 2727 void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs) 2728 { 2729 common->sysfs = sysfs; 2730 } 2731 EXPORT_SYMBOL_GPL(fsg_common_set_sysfs); 2732 2733 static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n) 2734 { 2735 if (buffhds) { 2736 struct fsg_buffhd *bh = buffhds; 2737 while (n--) { 2738 kfree(bh->buf); 2739 ++bh; 2740 } 2741 kfree(buffhds); 2742 } 2743 } 2744 2745 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n) 2746 { 2747 struct fsg_buffhd *bh, *buffhds; 2748 int i; 2749 2750 if (n < 2) 2751 return -EINVAL; 2752 2753 buffhds = kzalloc_objs(*buffhds, n); 2754 if (!buffhds) 2755 return -ENOMEM; 2756 2757 /* Data buffers cyclic list */ 2758 bh = buffhds; 2759 i = n; 2760 goto buffhds_first_it; 2761 do { 2762 bh->next = bh + 1; 2763 ++bh; 2764 buffhds_first_it: 2765 bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); 2766 if (unlikely(!bh->buf)) 2767 goto error_release; 2768 } while (--i); 2769 bh->next = buffhds; 2770 2771 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 2772 common->fsg_num_buffers = n; 2773 common->buffhds = buffhds; 2774 2775 return 0; 2776 2777 error_release: 2778 /* 2779 * "buf"s pointed to by heads after n - i are NULL 2780 * so releasing them won't hurt 2781 */ 2782 _fsg_common_free_buffers(buffhds, n); 2783 2784 return -ENOMEM; 2785 } 2786 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); 2787 2788 void fsg_common_remove_lun(struct fsg_lun *lun) 2789 { 2790 if (device_is_registered(&lun->dev)) 2791 device_unregister(&lun->dev); 2792 fsg_lun_close(lun); 2793 kfree(lun); 2794 } 2795 EXPORT_SYMBOL_GPL(fsg_common_remove_lun); 2796 2797 static void _fsg_common_remove_luns(struct fsg_common *common, int n) 2798 { 2799 int i; 2800 2801 for (i = 0; i < n; ++i) 2802 if (common->luns[i]) { 2803 fsg_common_remove_lun(common->luns[i]); 2804 common->luns[i] = NULL; 2805 } 2806 } 2807 2808 void fsg_common_remove_luns(struct fsg_common *common) 2809 { 2810 _fsg_common_remove_luns(common, ARRAY_SIZE(common->luns)); 2811 } 2812 EXPORT_SYMBOL_GPL(fsg_common_remove_luns); 2813 2814 void fsg_common_free_buffers(struct fsg_common *common) 2815 { 2816 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 2817 common->buffhds = NULL; 2818 } 2819 EXPORT_SYMBOL_GPL(fsg_common_free_buffers); 2820 2821 int fsg_common_set_cdev(struct fsg_common *common, 2822 struct usb_composite_dev *cdev, bool can_stall) 2823 { 2824 struct usb_string *us; 2825 2826 common->gadget = cdev->gadget; 2827 common->ep0 = cdev->gadget->ep0; 2828 common->ep0req = cdev->req; 2829 common->cdev = cdev; 2830 2831 us = usb_gstrings_attach(cdev, fsg_strings_array, 2832 ARRAY_SIZE(fsg_strings)); 2833 if (IS_ERR(us)) 2834 return PTR_ERR(us); 2835 2836 fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id; 2837 2838 /* 2839 * Some peripheral controllers are known not to be able to 2840 * halt bulk endpoints correctly. If one of them is present, 2841 * disable stalls. 2842 */ 2843 common->can_stall = can_stall && 2844 gadget_is_stall_supported(common->gadget); 2845 2846 return 0; 2847 } 2848 EXPORT_SYMBOL_GPL(fsg_common_set_cdev); 2849 2850 static struct attribute *fsg_lun_dev_attrs[] = { 2851 &dev_attr_ro.attr, 2852 &dev_attr_file.attr, 2853 &dev_attr_nofua.attr, 2854 &dev_attr_forced_eject.attr, 2855 NULL 2856 }; 2857 2858 static umode_t fsg_lun_dev_is_visible(struct kobject *kobj, 2859 struct attribute *attr, int idx) 2860 { 2861 struct device *dev = kobj_to_dev(kobj); 2862 struct fsg_lun *lun = fsg_lun_from_dev(dev); 2863 2864 if (attr == &dev_attr_ro.attr) 2865 return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO); 2866 if (attr == &dev_attr_file.attr) 2867 return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO; 2868 return attr->mode; 2869 } 2870 2871 static const struct attribute_group fsg_lun_dev_group = { 2872 .attrs = fsg_lun_dev_attrs, 2873 .is_visible = fsg_lun_dev_is_visible, 2874 }; 2875 2876 static const struct attribute_group *fsg_lun_dev_groups[] = { 2877 &fsg_lun_dev_group, 2878 NULL 2879 }; 2880 2881 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, 2882 unsigned int id, const char *name, 2883 const char **name_pfx) 2884 { 2885 struct fsg_lun *lun; 2886 char *pathbuf = NULL, *p = "(no medium)"; 2887 int rc = -ENOMEM; 2888 2889 if (id >= ARRAY_SIZE(common->luns)) 2890 return -ENODEV; 2891 2892 if (common->luns[id]) 2893 return -EBUSY; 2894 2895 if (!cfg->filename && !cfg->removable) { 2896 pr_err("no file given for LUN%d\n", id); 2897 return -EINVAL; 2898 } 2899 2900 lun = kzalloc_obj(*lun); 2901 if (!lun) 2902 return -ENOMEM; 2903 2904 lun->name_pfx = name_pfx; 2905 2906 lun->cdrom = !!cfg->cdrom; 2907 lun->ro = cfg->cdrom || cfg->ro; 2908 lun->initially_ro = lun->ro; 2909 lun->removable = !!cfg->removable; 2910 2911 if (!common->sysfs) { 2912 /* we DON'T own the name!*/ 2913 lun->name = name; 2914 } else { 2915 lun->dev.release = fsg_lun_release; 2916 lun->dev.parent = &common->gadget->dev; 2917 lun->dev.groups = fsg_lun_dev_groups; 2918 dev_set_drvdata(&lun->dev, &common->filesem); 2919 dev_set_name(&lun->dev, "%s", name); 2920 lun->name = dev_name(&lun->dev); 2921 2922 rc = device_register(&lun->dev); 2923 if (rc) { 2924 pr_info("failed to register LUN%d: %d\n", id, rc); 2925 put_device(&lun->dev); 2926 goto error_sysfs; 2927 } 2928 } 2929 2930 common->luns[id] = lun; 2931 2932 if (cfg->filename) { 2933 rc = fsg_lun_open(lun, cfg->filename); 2934 if (rc) 2935 goto error_lun; 2936 2937 p = "(error)"; 2938 pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); 2939 if (pathbuf) { 2940 p = file_path(lun->filp, pathbuf, PATH_MAX); 2941 if (IS_ERR(p)) 2942 p = "(error)"; 2943 } 2944 } 2945 pr_info("LUN: %s%s%sfile: %s\n", 2946 lun->removable ? "removable " : "", 2947 lun->ro ? "read only " : "", 2948 lun->cdrom ? "CD-ROM " : "", 2949 p); 2950 kfree(pathbuf); 2951 2952 return 0; 2953 2954 error_lun: 2955 if (device_is_registered(&lun->dev)) 2956 device_unregister(&lun->dev); 2957 common->luns[id] = NULL; 2958 error_sysfs: 2959 kfree(lun); 2960 return rc; 2961 } 2962 EXPORT_SYMBOL_GPL(fsg_common_create_lun); 2963 2964 int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg) 2965 { 2966 char buf[14]; 2967 int i, rc; 2968 2969 fsg_common_remove_luns(common); 2970 2971 for (i = 0; i < cfg->nluns; ++i) { 2972 snprintf(buf, sizeof(buf), "lun%d", i); 2973 rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL); 2974 if (rc) 2975 goto fail; 2976 } 2977 2978 pr_info("Number of LUNs=%d\n", cfg->nluns); 2979 2980 return 0; 2981 2982 fail: 2983 _fsg_common_remove_luns(common, i); 2984 return rc; 2985 } 2986 EXPORT_SYMBOL_GPL(fsg_common_create_luns); 2987 2988 void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, 2989 const char *pn) 2990 { 2991 int i; 2992 2993 /* Prepare inquiryString */ 2994 i = get_default_bcdDevice(); 2995 snprintf(common->inquiry_string, sizeof(common->inquiry_string), 2996 "%-8s%-16s%04x", vn ?: "Linux", 2997 /* Assume product name dependent on the first LUN */ 2998 pn ?: ((*common->luns)->cdrom 2999 ? "File-CD Gadget" 3000 : "File-Stor Gadget"), 3001 i); 3002 } 3003 EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string); 3004 3005 static void fsg_common_release(struct fsg_common *common) 3006 { 3007 int i; 3008 3009 /* If the thread isn't already dead, tell it to exit now */ 3010 if (common->state != FSG_STATE_TERMINATED) { 3011 raise_exception(common, FSG_STATE_EXIT); 3012 wait_for_completion(&common->thread_notifier); 3013 } 3014 3015 for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { 3016 struct fsg_lun *lun = common->luns[i]; 3017 if (!lun) 3018 continue; 3019 fsg_lun_close(lun); 3020 if (device_is_registered(&lun->dev)) 3021 device_unregister(&lun->dev); 3022 kfree(lun); 3023 } 3024 3025 _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); 3026 if (common->free_storage_on_release) 3027 kfree(common); 3028 } 3029 3030 3031 /*-------------------------------------------------------------------------*/ 3032 3033 static int fsg_bind(struct usb_configuration *c, struct usb_function *f) 3034 { 3035 struct fsg_dev *fsg = fsg_from_func(f); 3036 struct fsg_common *common = fsg->common; 3037 struct usb_gadget *gadget = c->cdev->gadget; 3038 int i; 3039 struct usb_ep *ep; 3040 unsigned max_burst; 3041 int ret; 3042 struct fsg_opts *opts; 3043 3044 /* Don't allow to bind if we don't have at least one LUN */ 3045 ret = _fsg_common_get_max_lun(common); 3046 if (ret < 0) { 3047 pr_err("There should be at least one LUN.\n"); 3048 return -EINVAL; 3049 } 3050 3051 opts = fsg_opts_from_func_inst(f->fi); 3052 if (!opts->no_configfs) { 3053 ret = fsg_common_set_cdev(fsg->common, c->cdev, 3054 fsg->common->can_stall); 3055 if (ret) 3056 return ret; 3057 fsg_common_set_inquiry_string(fsg->common, NULL, NULL); 3058 } 3059 3060 if (!common->thread_task) { 3061 common->state = FSG_STATE_NORMAL; 3062 common->thread_task = 3063 kthread_run(fsg_main_thread, common, "file-storage"); 3064 if (IS_ERR(common->thread_task)) { 3065 ret = PTR_ERR(common->thread_task); 3066 common->thread_task = NULL; 3067 common->state = FSG_STATE_TERMINATED; 3068 return ret; 3069 } 3070 DBG(common, "I/O thread pid: %d\n", 3071 task_pid_nr(common->thread_task)); 3072 } 3073 3074 fsg->gadget = gadget; 3075 3076 /* New interface */ 3077 i = usb_interface_id(c, f); 3078 if (i < 0) 3079 goto fail; 3080 fsg_intf_desc.bInterfaceNumber = i; 3081 fsg->interface_number = i; 3082 3083 /* Find all the endpoints we will use */ 3084 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); 3085 if (!ep) 3086 goto autoconf_fail; 3087 fsg->bulk_in = ep; 3088 3089 ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); 3090 if (!ep) 3091 goto autoconf_fail; 3092 fsg->bulk_out = ep; 3093 3094 /* Assume endpoint addresses are the same for both speeds */ 3095 fsg_hs_bulk_in_desc.bEndpointAddress = 3096 fsg_fs_bulk_in_desc.bEndpointAddress; 3097 fsg_hs_bulk_out_desc.bEndpointAddress = 3098 fsg_fs_bulk_out_desc.bEndpointAddress; 3099 3100 /* Calculate bMaxBurst, we know packet size is 1024 */ 3101 max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); 3102 3103 fsg_ss_bulk_in_desc.bEndpointAddress = 3104 fsg_fs_bulk_in_desc.bEndpointAddress; 3105 fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; 3106 3107 fsg_ss_bulk_out_desc.bEndpointAddress = 3108 fsg_fs_bulk_out_desc.bEndpointAddress; 3109 fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; 3110 3111 ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function, 3112 fsg_ss_function, fsg_ss_function); 3113 if (ret) 3114 goto autoconf_fail; 3115 3116 return 0; 3117 3118 autoconf_fail: 3119 ERROR(fsg, "unable to autoconfigure all endpoints\n"); 3120 i = -ENOTSUPP; 3121 fail: 3122 /* terminate the thread */ 3123 if (fsg->common->state != FSG_STATE_TERMINATED) { 3124 raise_exception(fsg->common, FSG_STATE_EXIT); 3125 wait_for_completion(&fsg->common->thread_notifier); 3126 } 3127 return i; 3128 } 3129 3130 /****************************** ALLOCATE FUNCTION *************************/ 3131 3132 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) 3133 { 3134 struct fsg_dev *fsg = fsg_from_func(f); 3135 struct fsg_common *common = fsg->common; 3136 3137 DBG(fsg, "unbind\n"); 3138 if (fsg->common->fsg == fsg) { 3139 __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); 3140 /* FIXME: make interruptible or killable somehow? */ 3141 wait_event(common->fsg_wait, common->fsg != fsg); 3142 } 3143 3144 usb_free_all_descriptors(&fsg->function); 3145 } 3146 3147 static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item) 3148 { 3149 return container_of(to_config_group(item), struct fsg_lun_opts, group); 3150 } 3151 3152 static inline struct fsg_opts *to_fsg_opts(struct config_item *item) 3153 { 3154 return container_of(to_config_group(item), struct fsg_opts, 3155 func_inst.group); 3156 } 3157 3158 static void fsg_lun_attr_release(struct config_item *item) 3159 { 3160 struct fsg_lun_opts *lun_opts; 3161 3162 lun_opts = to_fsg_lun_opts(item); 3163 kfree(lun_opts); 3164 } 3165 3166 static const struct configfs_item_operations fsg_lun_item_ops = { 3167 .release = fsg_lun_attr_release, 3168 }; 3169 3170 static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page) 3171 { 3172 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3173 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3174 3175 return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page); 3176 } 3177 3178 static ssize_t fsg_lun_opts_file_store(struct config_item *item, 3179 const char *page, size_t len) 3180 { 3181 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3182 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3183 3184 return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len); 3185 } 3186 3187 CONFIGFS_ATTR(fsg_lun_opts_, file); 3188 3189 static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page) 3190 { 3191 return fsg_show_ro(to_fsg_lun_opts(item)->lun, page); 3192 } 3193 3194 static ssize_t fsg_lun_opts_ro_store(struct config_item *item, 3195 const char *page, size_t len) 3196 { 3197 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3198 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3199 3200 return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len); 3201 } 3202 3203 CONFIGFS_ATTR(fsg_lun_opts_, ro); 3204 3205 static ssize_t fsg_lun_opts_removable_show(struct config_item *item, 3206 char *page) 3207 { 3208 return fsg_show_removable(to_fsg_lun_opts(item)->lun, page); 3209 } 3210 3211 static ssize_t fsg_lun_opts_removable_store(struct config_item *item, 3212 const char *page, size_t len) 3213 { 3214 return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len); 3215 } 3216 3217 CONFIGFS_ATTR(fsg_lun_opts_, removable); 3218 3219 static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page) 3220 { 3221 return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page); 3222 } 3223 3224 static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item, 3225 const char *page, size_t len) 3226 { 3227 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3228 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3229 3230 return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page, 3231 len); 3232 } 3233 3234 CONFIGFS_ATTR(fsg_lun_opts_, cdrom); 3235 3236 static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page) 3237 { 3238 return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page); 3239 } 3240 3241 static ssize_t fsg_lun_opts_nofua_store(struct config_item *item, 3242 const char *page, size_t len) 3243 { 3244 return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len); 3245 } 3246 3247 CONFIGFS_ATTR(fsg_lun_opts_, nofua); 3248 3249 static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item, 3250 char *page) 3251 { 3252 return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page); 3253 } 3254 3255 static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item, 3256 const char *page, size_t len) 3257 { 3258 return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len); 3259 } 3260 3261 CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string); 3262 3263 static ssize_t fsg_lun_opts_forced_eject_store(struct config_item *item, 3264 const char *page, size_t len) 3265 { 3266 struct fsg_lun_opts *opts = to_fsg_lun_opts(item); 3267 struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); 3268 3269 return fsg_store_forced_eject(opts->lun, &fsg_opts->common->filesem, 3270 page, len); 3271 } 3272 3273 CONFIGFS_ATTR_WO(fsg_lun_opts_, forced_eject); 3274 3275 static struct configfs_attribute *fsg_lun_attrs[] = { 3276 &fsg_lun_opts_attr_file, 3277 &fsg_lun_opts_attr_ro, 3278 &fsg_lun_opts_attr_removable, 3279 &fsg_lun_opts_attr_cdrom, 3280 &fsg_lun_opts_attr_nofua, 3281 &fsg_lun_opts_attr_inquiry_string, 3282 &fsg_lun_opts_attr_forced_eject, 3283 NULL, 3284 }; 3285 3286 static const struct config_item_type fsg_lun_type = { 3287 .ct_item_ops = &fsg_lun_item_ops, 3288 .ct_attrs = fsg_lun_attrs, 3289 .ct_owner = THIS_MODULE, 3290 }; 3291 3292 static struct config_group *fsg_lun_make(struct config_group *group, 3293 const char *name) 3294 { 3295 struct fsg_lun_opts *opts; 3296 struct fsg_opts *fsg_opts; 3297 struct fsg_lun_config config; 3298 char *num_str; 3299 u8 num; 3300 int ret; 3301 3302 num_str = strchr(name, '.'); 3303 if (!num_str) { 3304 pr_err("Unable to locate . in LUN.NUMBER\n"); 3305 return ERR_PTR(-EINVAL); 3306 } 3307 num_str++; 3308 3309 ret = kstrtou8(num_str, 0, &num); 3310 if (ret) 3311 return ERR_PTR(ret); 3312 3313 fsg_opts = to_fsg_opts(&group->cg_item); 3314 if (num >= FSG_MAX_LUNS) 3315 return ERR_PTR(-ERANGE); 3316 num = array_index_nospec(num, FSG_MAX_LUNS); 3317 3318 mutex_lock(&fsg_opts->lock); 3319 if (fsg_opts->refcnt || fsg_opts->common->luns[num]) { 3320 ret = -EBUSY; 3321 goto out; 3322 } 3323 3324 opts = kzalloc_obj(*opts); 3325 if (!opts) { 3326 ret = -ENOMEM; 3327 goto out; 3328 } 3329 3330 memset(&config, 0, sizeof(config)); 3331 config.removable = true; 3332 3333 ret = fsg_common_create_lun(fsg_opts->common, &config, num, name, 3334 (const char **)&group->cg_item.ci_name); 3335 if (ret) { 3336 kfree(opts); 3337 goto out; 3338 } 3339 opts->lun = fsg_opts->common->luns[num]; 3340 opts->lun_id = num; 3341 mutex_unlock(&fsg_opts->lock); 3342 3343 config_group_init_type_name(&opts->group, name, &fsg_lun_type); 3344 3345 return &opts->group; 3346 out: 3347 mutex_unlock(&fsg_opts->lock); 3348 return ERR_PTR(ret); 3349 } 3350 3351 static void fsg_lun_drop(struct config_group *group, struct config_item *item) 3352 { 3353 struct fsg_lun_opts *lun_opts; 3354 struct fsg_opts *fsg_opts; 3355 3356 lun_opts = to_fsg_lun_opts(item); 3357 fsg_opts = to_fsg_opts(&group->cg_item); 3358 3359 mutex_lock(&fsg_opts->lock); 3360 if (fsg_opts->refcnt) { 3361 struct config_item *gadget; 3362 3363 gadget = group->cg_item.ci_parent->ci_parent; 3364 unregister_gadget_item(gadget); 3365 } 3366 3367 fsg_common_remove_lun(lun_opts->lun); 3368 fsg_opts->common->luns[lun_opts->lun_id] = NULL; 3369 lun_opts->lun_id = 0; 3370 mutex_unlock(&fsg_opts->lock); 3371 3372 config_item_put(item); 3373 } 3374 3375 static void fsg_attr_release(struct config_item *item) 3376 { 3377 struct fsg_opts *opts = to_fsg_opts(item); 3378 3379 usb_put_function_instance(&opts->func_inst); 3380 } 3381 3382 static const struct configfs_item_operations fsg_item_ops = { 3383 .release = fsg_attr_release, 3384 }; 3385 3386 static ssize_t fsg_opts_stall_show(struct config_item *item, char *page) 3387 { 3388 struct fsg_opts *opts = to_fsg_opts(item); 3389 int result; 3390 3391 mutex_lock(&opts->lock); 3392 result = sprintf(page, "%d", opts->common->can_stall); 3393 mutex_unlock(&opts->lock); 3394 3395 return result; 3396 } 3397 3398 static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page, 3399 size_t len) 3400 { 3401 struct fsg_opts *opts = to_fsg_opts(item); 3402 int ret; 3403 bool stall; 3404 3405 mutex_lock(&opts->lock); 3406 3407 if (opts->refcnt) { 3408 mutex_unlock(&opts->lock); 3409 return -EBUSY; 3410 } 3411 3412 ret = kstrtobool(page, &stall); 3413 if (!ret) { 3414 opts->common->can_stall = stall; 3415 ret = len; 3416 } 3417 3418 mutex_unlock(&opts->lock); 3419 3420 return ret; 3421 } 3422 3423 CONFIGFS_ATTR(fsg_opts_, stall); 3424 3425 #ifdef CONFIG_USB_GADGET_DEBUG_FILES 3426 static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page) 3427 { 3428 struct fsg_opts *opts = to_fsg_opts(item); 3429 int result; 3430 3431 mutex_lock(&opts->lock); 3432 result = sprintf(page, "%d", opts->common->fsg_num_buffers); 3433 mutex_unlock(&opts->lock); 3434 3435 return result; 3436 } 3437 3438 static ssize_t fsg_opts_num_buffers_store(struct config_item *item, 3439 const char *page, size_t len) 3440 { 3441 struct fsg_opts *opts = to_fsg_opts(item); 3442 int ret; 3443 u8 num; 3444 3445 mutex_lock(&opts->lock); 3446 if (opts->refcnt) { 3447 ret = -EBUSY; 3448 goto end; 3449 } 3450 ret = kstrtou8(page, 0, &num); 3451 if (ret) 3452 goto end; 3453 3454 ret = fsg_common_set_num_buffers(opts->common, num); 3455 if (ret) 3456 goto end; 3457 ret = len; 3458 3459 end: 3460 mutex_unlock(&opts->lock); 3461 return ret; 3462 } 3463 3464 CONFIGFS_ATTR(fsg_opts_, num_buffers); 3465 #endif 3466 3467 static struct configfs_attribute *fsg_attrs[] = { 3468 &fsg_opts_attr_stall, 3469 #ifdef CONFIG_USB_GADGET_DEBUG_FILES 3470 &fsg_opts_attr_num_buffers, 3471 #endif 3472 NULL, 3473 }; 3474 3475 static const struct configfs_group_operations fsg_group_ops = { 3476 .make_group = fsg_lun_make, 3477 .drop_item = fsg_lun_drop, 3478 }; 3479 3480 static const struct config_item_type fsg_func_type = { 3481 .ct_item_ops = &fsg_item_ops, 3482 .ct_group_ops = &fsg_group_ops, 3483 .ct_attrs = fsg_attrs, 3484 .ct_owner = THIS_MODULE, 3485 }; 3486 3487 static void fsg_free_inst(struct usb_function_instance *fi) 3488 { 3489 struct fsg_opts *opts; 3490 3491 opts = fsg_opts_from_func_inst(fi); 3492 fsg_common_release(opts->common); 3493 kfree(opts); 3494 } 3495 3496 static struct usb_function_instance *fsg_alloc_inst(void) 3497 { 3498 struct fsg_opts *opts; 3499 struct fsg_lun_config config; 3500 int rc; 3501 3502 opts = kzalloc_obj(*opts); 3503 if (!opts) 3504 return ERR_PTR(-ENOMEM); 3505 mutex_init(&opts->lock); 3506 opts->func_inst.free_func_inst = fsg_free_inst; 3507 opts->common = fsg_common_setup(opts->common); 3508 if (IS_ERR(opts->common)) { 3509 rc = PTR_ERR(opts->common); 3510 goto release_opts; 3511 } 3512 3513 rc = fsg_common_set_num_buffers(opts->common, 3514 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS); 3515 if (rc) 3516 goto release_common; 3517 3518 memset(&config, 0, sizeof(config)); 3519 config.removable = true; 3520 rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0", 3521 (const char **)&opts->func_inst.group.cg_item.ci_name); 3522 if (rc) 3523 goto release_buffers; 3524 3525 opts->lun0.lun = opts->common->luns[0]; 3526 opts->lun0.lun_id = 0; 3527 3528 config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type); 3529 3530 config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type); 3531 configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group); 3532 3533 return &opts->func_inst; 3534 3535 release_buffers: 3536 fsg_common_free_buffers(opts->common); 3537 release_common: 3538 kfree(opts->common); 3539 release_opts: 3540 kfree(opts); 3541 return ERR_PTR(rc); 3542 } 3543 3544 static void fsg_free(struct usb_function *f) 3545 { 3546 struct fsg_dev *fsg; 3547 struct fsg_opts *opts; 3548 3549 fsg = container_of(f, struct fsg_dev, function); 3550 opts = container_of(f->fi, struct fsg_opts, func_inst); 3551 3552 mutex_lock(&opts->lock); 3553 opts->refcnt--; 3554 mutex_unlock(&opts->lock); 3555 3556 kfree(fsg); 3557 } 3558 3559 static struct usb_function *fsg_alloc(struct usb_function_instance *fi) 3560 { 3561 struct fsg_opts *opts = fsg_opts_from_func_inst(fi); 3562 struct fsg_common *common = opts->common; 3563 struct fsg_dev *fsg; 3564 3565 fsg = kzalloc_obj(*fsg); 3566 if (unlikely(!fsg)) 3567 return ERR_PTR(-ENOMEM); 3568 3569 mutex_lock(&opts->lock); 3570 opts->refcnt++; 3571 mutex_unlock(&opts->lock); 3572 3573 fsg->function.name = FSG_DRIVER_DESC; 3574 fsg->function.bind = fsg_bind; 3575 fsg->function.unbind = fsg_unbind; 3576 fsg->function.setup = fsg_setup; 3577 fsg->function.set_alt = fsg_set_alt; 3578 fsg->function.disable = fsg_disable; 3579 fsg->function.free_func = fsg_free; 3580 3581 fsg->common = common; 3582 3583 return &fsg->function; 3584 } 3585 3586 DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc); 3587 MODULE_DESCRIPTION("Mass Storage USB Composite Function"); 3588 MODULE_LICENSE("GPL"); 3589 MODULE_AUTHOR("Michal Nazarewicz"); 3590 3591 /************************* Module parameters *************************/ 3592 3593 3594 void fsg_config_from_params(struct fsg_config *cfg, 3595 const struct fsg_module_parameters *params, 3596 unsigned int fsg_num_buffers) 3597 { 3598 struct fsg_lun_config *lun; 3599 unsigned i; 3600 3601 /* Configure LUNs */ 3602 cfg->nluns = 3603 min(params->luns ?: (params->file_count ?: 1u), 3604 (unsigned)FSG_MAX_LUNS); 3605 for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { 3606 lun->ro = !!params->ro[i]; 3607 lun->cdrom = !!params->cdrom[i]; 3608 lun->removable = !!params->removable[i]; 3609 lun->filename = 3610 params->file_count > i && params->file[i][0] 3611 ? params->file[i] 3612 : NULL; 3613 } 3614 3615 /* Let MSF use defaults */ 3616 cfg->vendor_name = NULL; 3617 cfg->product_name = NULL; 3618 3619 cfg->ops = NULL; 3620 cfg->private_data = NULL; 3621 3622 /* Finalise */ 3623 cfg->can_stall = params->stall; 3624 cfg->fsg_num_buffers = fsg_num_buffers; 3625 } 3626 EXPORT_SYMBOL_GPL(fsg_config_from_params); 3627