xref: /linux/drivers/usb/gadget/Kconfig (revision 15761826eecda192f4d1527e08c32193a03e94b7)
1#
2# USB Gadget support on a system involves
3#    (a) a peripheral controller, and
4#    (b) the gadget driver using it.
5#
6# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
7#
8#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
9#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
10#  - Some systems have both kinds of controllers.
11#
12# With help from a special transceiver and a "Mini-AB" jack, systems with
13# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
14#
15
16menuconfig USB_GADGET
17	tristate "USB Gadget Support"
18	select NLS
19	help
20	   USB is a master/slave protocol, organized with one master
21	   host (such as a PC) controlling up to 127 peripheral devices.
22	   The USB hardware is asymmetric, which makes it easier to set up:
23	   you can't connect a "to-the-host" connector to a peripheral.
24
25	   Linux can run in the host, or in the peripheral.  In both cases
26	   you need a low level bus controller driver, and some software
27	   talking to it.  Peripheral controllers are often discrete silicon,
28	   or are integrated with the CPU in a microcontroller.  The more
29	   familiar host side controllers have names like "EHCI", "OHCI",
30	   or "UHCI", and are usually integrated into southbridges on PC
31	   motherboards.
32
33	   Enable this configuration option if you want to run Linux inside
34	   a USB peripheral device.  Configure one hardware driver for your
35	   peripheral/device side bus controller, and a "gadget driver" for
36	   your peripheral protocol.  (If you use modular gadget drivers,
37	   you may configure more than one.)
38
39	   If in doubt, say "N" and don't enable these drivers; most people
40	   don't have this kind of hardware (except maybe inside Linux PDAs).
41
42	   For more information, see <http://www.linux-usb.org/gadget> and
43	   the kernel DocBook documentation for this API.
44
45if USB_GADGET
46
47config USB_GADGET_DEBUG
48	boolean "Debugging messages (DEVELOPMENT)"
49	depends on DEBUG_KERNEL
50	help
51	   Many controller and gadget drivers will print some debugging
52	   messages if you use this option to ask for those messages.
53
54	   Avoid enabling these messages, even if you're actively
55	   debugging such a driver.  Many drivers will emit so many
56	   messages that the driver timings are affected, which will
57	   either create new failure modes or remove the one you're
58	   trying to track down.  Never enable these messages for a
59	   production build.
60
61config USB_GADGET_DEBUG_FILES
62	boolean "Debugging information files (DEVELOPMENT)"
63	depends on PROC_FS
64	help
65	   Some of the drivers in the "gadget" framework can expose
66	   debugging information in files such as /proc/driver/udc
67	   (for a peripheral controller).  The information in these
68	   files may help when you're troubleshooting or bringing up a
69	   driver on a new board.   Enable these files by choosing "Y"
70	   here.  If in doubt, or to conserve kernel memory, say "N".
71
72config USB_GADGET_DEBUG_FS
73	boolean "Debugging information files in debugfs (DEVELOPMENT)"
74	depends on DEBUG_FS
75	help
76	   Some of the drivers in the "gadget" framework can expose
77	   debugging information in files under /sys/kernel/debug/.
78	   The information in these files may help when you're
79	   troubleshooting or bringing up a driver on a new board.
80	   Enable these files by choosing "Y" here.  If in doubt, or
81	   to conserve kernel memory, say "N".
82
83config USB_GADGET_VBUS_DRAW
84	int "Maximum VBUS Power usage (2-500 mA)"
85	range 2 500
86	default 2
87	help
88	   Some devices need to draw power from USB when they are
89	   configured, perhaps to operate circuitry or to recharge
90	   batteries.  This is in addition to any local power supply,
91	   such as an AC adapter or batteries.
92
93	   Enter the maximum power your device draws through USB, in
94	   milliAmperes.  The permitted range of values is 2 - 500 mA;
95	   0 mA would be legal, but can make some hosts misbehave.
96
97	   This value will be used except for system-specific gadget
98	   drivers that have more specific information.
99
100config USB_GADGET_STORAGE_NUM_BUFFERS
101	int "Number of storage pipeline buffers"
102	range 2 4
103	default 2
104	help
105	   Usually 2 buffers are enough to establish a good buffering
106	   pipeline. The number may be increased in order to compensate
107	   for a bursty VFS behaviour. For instance there may be CPU wake up
108	   latencies that makes the VFS to appear bursty in a system with
109	   an CPU on-demand governor. Especially if DMA is doing IO to
110	   offload the CPU. In this case the CPU will go into power
111	   save often and spin up occasionally to move data within VFS.
112	   If selecting USB_GADGET_DEBUG_FILES this value may be set by
113	   a module parameter as well.
114	   If unsure, say 2.
115
116#
117# USB Peripheral Controller Support
118#
119# The order here is alphabetical, except that integrated controllers go
120# before discrete ones so they will be the initial/default value:
121#   - integrated/SOC controllers first
122#   - licensed IP used in both SOC and discrete versions
123#   - discrete ones (including all PCI-only controllers)
124#   - debug/dummy gadget+hcd is last.
125#
126menu "USB Peripheral Controller"
127
128#
129# Integrated controllers
130#
131
132config USB_AT91
133	tristate "Atmel AT91 USB Device Port"
134	depends on ARCH_AT91
135	help
136	   Many Atmel AT91 processors (such as the AT91RM2000) have a
137	   full speed USB Device Port with support for five configurable
138	   endpoints (plus endpoint zero).
139
140	   Say "y" to link the driver statically, or "m" to build a
141	   dynamically linked module called "at91_udc" and force all
142	   gadget drivers to also be dynamically linked.
143
144config USB_LPC32XX
145	tristate "LPC32XX USB Peripheral Controller"
146	depends on ARCH_LPC32XX
147	select USB_ISP1301
148	help
149	   This option selects the USB device controller in the LPC32xx SoC.
150
151	   Say "y" to link the driver statically, or "m" to build a
152	   dynamically linked module called "lpc32xx_udc" and force all
153	   gadget drivers to also be dynamically linked.
154
155config USB_ATMEL_USBA
156	tristate "Atmel USBA"
157	depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
158	help
159	  USBA is the integrated high-speed USB Device controller on
160	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
161
162config USB_BCM63XX_UDC
163	tristate "Broadcom BCM63xx Peripheral Controller"
164	depends on BCM63XX
165	help
166	   Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
167	   high speed USB Device Port with support for four fixed endpoints
168	   (plus endpoint zero).
169
170	   Say "y" to link the driver statically, or "m" to build a
171	   dynamically linked module called "bcm63xx_udc".
172
173config USB_FSL_USB2
174	tristate "Freescale Highspeed USB DR Peripheral Controller"
175	depends on FSL_SOC || ARCH_MXC
176	select USB_FSL_MPH_DR_OF if OF
177	help
178	   Some of Freescale PowerPC and i.MX processors have a High Speed
179	   Dual-Role(DR) USB controller, which supports device mode.
180
181	   The number of programmable endpoints is different through
182	   SOC revisions.
183
184	   Say "y" to link the driver statically, or "m" to build a
185	   dynamically linked module called "fsl_usb2_udc" and force
186	   all gadget drivers to also be dynamically linked.
187
188config USB_FUSB300
189	tristate "Faraday FUSB300 USB Peripheral Controller"
190	depends on !PHYS_ADDR_T_64BIT
191	help
192	   Faraday usb device controller FUSB300 driver
193
194config USB_OMAP
195	tristate "OMAP USB Device Controller"
196	depends on ARCH_OMAP1
197	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
198	help
199	   Many Texas Instruments OMAP processors have flexible full
200	   speed USB device controllers, with support for up to 30
201	   endpoints (plus endpoint zero).  This driver supports the
202	   controller in the OMAP 1611, and should work with controllers
203	   in other OMAP processors too, given minor tweaks.
204
205	   Say "y" to link the driver statically, or "m" to build a
206	   dynamically linked module called "omap_udc" and force all
207	   gadget drivers to also be dynamically linked.
208
209config USB_PXA25X
210	tristate "PXA 25x or IXP 4xx"
211	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
212	help
213	   Intel's PXA 25x series XScale ARM-5TE processors include
214	   an integrated full speed USB 1.1 device controller.  The
215	   controller in the IXP 4xx series is register-compatible.
216
217	   It has fifteen fixed-function endpoints, as well as endpoint
218	   zero (for control transfers).
219
220	   Say "y" to link the driver statically, or "m" to build a
221	   dynamically linked module called "pxa25x_udc" and force all
222	   gadget drivers to also be dynamically linked.
223
224# if there's only one gadget driver, using only two bulk endpoints,
225# don't waste memory for the other endpoints
226config USB_PXA25X_SMALL
227	depends on USB_PXA25X
228	bool
229	default n if USB_ETH_RNDIS
230	default y if USB_ZERO
231	default y if USB_ETH
232	default y if USB_G_SERIAL
233
234config USB_R8A66597
235	tristate "Renesas R8A66597 USB Peripheral Controller"
236	help
237	   R8A66597 is a discrete USB host and peripheral controller chip that
238	   supports both full and high speed USB 2.0 data transfers.
239	   It has nine configurable endpoints, and endpoint zero.
240
241	   Say "y" to link the driver statically, or "m" to build a
242	   dynamically linked module called "r8a66597_udc" and force all
243	   gadget drivers to also be dynamically linked.
244
245config USB_RENESAS_USBHS_UDC
246	tristate 'Renesas USBHS controller'
247	depends on USB_RENESAS_USBHS
248	help
249	   Renesas USBHS is a discrete USB host and peripheral controller chip
250	   that supports both full and high speed USB 2.0 data transfers.
251	   It has nine or more configurable endpoints, and endpoint zero.
252
253	   Say "y" to link the driver statically, or "m" to build a
254	   dynamically linked module called "renesas_usbhs" and force all
255	   gadget drivers to also be dynamically linked.
256
257config USB_PXA27X
258	tristate "PXA 27x"
259	help
260	   Intel's PXA 27x series XScale ARM v5TE processors include
261	   an integrated full speed USB 1.1 device controller.
262
263	   It has up to 23 endpoints, as well as endpoint zero (for
264	   control transfers).
265
266	   Say "y" to link the driver statically, or "m" to build a
267	   dynamically linked module called "pxa27x_udc" and force all
268	   gadget drivers to also be dynamically linked.
269
270config USB_S3C_HSOTG
271	tristate "S3C HS/OtG USB Device controller"
272	depends on S3C_DEV_USB_HSOTG
273	help
274	  The Samsung S3C64XX USB2.0 high-speed gadget controller
275	  integrated into the S3C64XX series SoC.
276
277config USB_IMX
278	tristate "Freescale i.MX1 USB Peripheral Controller"
279	depends on ARCH_MXC
280	depends on BROKEN
281	help
282	   Freescale's i.MX1 includes an integrated full speed
283	   USB 1.1 device controller.
284
285	   It has Six fixed-function endpoints, as well as endpoint
286	   zero (for control transfers).
287
288	   Say "y" to link the driver statically, or "m" to build a
289	   dynamically linked module called "imx_udc" and force all
290	   gadget drivers to also be dynamically linked.
291
292config USB_S3C2410
293	tristate "S3C2410 USB Device Controller"
294	depends on ARCH_S3C24XX
295	help
296	  Samsung's S3C2410 is an ARM-4 processor with an integrated
297	  full speed USB 1.1 device controller.  It has 4 configurable
298	  endpoints, as well as endpoint zero (for control transfers).
299
300	  This driver has been tested on the S3C2410, S3C2412, and
301	  S3C2440 processors.
302
303config USB_S3C2410_DEBUG
304	boolean "S3C2410 udc debug messages"
305	depends on USB_S3C2410
306
307config USB_S3C_HSUDC
308	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
309	depends on ARCH_S3C24XX
310	help
311	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
312	  integrated with dual speed USB 2.0 device controller. It has
313	  8 endpoints, as well as endpoint zero.
314
315	  This driver has been tested on S3C2416 and S3C2450 processors.
316
317config USB_MV_UDC
318	tristate "Marvell USB2.0 Device Controller"
319	depends on GENERIC_HARDIRQS
320	help
321	  Marvell Socs (including PXA and MMP series) include a high speed
322	  USB2.0 OTG controller, which can be configured as high speed or
323	  full speed USB peripheral.
324
325config USB_MV_U3D
326	tristate "MARVELL PXA2128 USB 3.0 controller"
327	help
328	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
329	  controller, which support super speed USB peripheral.
330
331#
332# Controllers available in both integrated and discrete versions
333#
334
335# musb builds in ../musb along with host support
336config USB_GADGET_MUSB_HDRC
337	tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
338	depends on USB_MUSB_HDRC
339	help
340	  This OTG-capable silicon IP is used in dual designs including
341	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
342
343config USB_M66592
344	tristate "Renesas M66592 USB Peripheral Controller"
345	help
346	   M66592 is a discrete USB peripheral controller chip that
347	   supports both full and high speed USB 2.0 data transfers.
348	   It has seven configurable endpoints, and endpoint zero.
349
350	   Say "y" to link the driver statically, or "m" to build a
351	   dynamically linked module called "m66592_udc" and force all
352	   gadget drivers to also be dynamically linked.
353
354#
355# Controllers available only in discrete form (and all PCI controllers)
356#
357
358config USB_AMD5536UDC
359	tristate "AMD5536 UDC"
360	depends on PCI
361	help
362	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
363	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
364	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
365	   The UDC port supports OTG operation, and may be used as a host port
366	   if it's not being used to implement peripheral or OTG roles.
367
368	   Say "y" to link the driver statically, or "m" to build a
369	   dynamically linked module called "amd5536udc" and force all
370	   gadget drivers to also be dynamically linked.
371
372config USB_FSL_QE
373	tristate "Freescale QE/CPM USB Device Controller"
374	depends on FSL_SOC && (QUICC_ENGINE || CPM)
375	help
376	   Some of Freescale PowerPC processors have a Full Speed
377	   QE/CPM2 USB controller, which support device mode with 4
378	   programmable endpoints. This driver supports the
379	   controller in the MPC8360 and MPC8272, and should work with
380	   controllers having QE or CPM2, given minor tweaks.
381
382	   Set CONFIG_USB_GADGET to "m" to build this driver as a
383	   dynamically linked module called "fsl_qe_udc".
384
385config USB_NET2272
386	tristate "PLX NET2272"
387	help
388	  PLX NET2272 is a USB peripheral controller which supports
389	  both full and high speed USB 2.0 data transfers.
390
391	  It has three configurable endpoints, as well as endpoint zero
392	  (for control transfer).
393	  Say "y" to link the driver statically, or "m" to build a
394	  dynamically linked module called "net2272" and force all
395	  gadget drivers to also be dynamically linked.
396
397config USB_NET2272_DMA
398	boolean "Support external DMA controller"
399	depends on USB_NET2272
400	help
401	  The NET2272 part can optionally support an external DMA
402	  controller, but your board has to have support in the
403	  driver itself.
404
405	  If unsure, say "N" here.  The driver works fine in PIO mode.
406
407config USB_NET2280
408	tristate "NetChip 228x"
409	depends on PCI
410	help
411	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
412	   supports both full and high speed USB 2.0 data transfers.
413
414	   It has six configurable endpoints, as well as endpoint zero
415	   (for control transfers) and several endpoints with dedicated
416	   functions.
417
418	   Say "y" to link the driver statically, or "m" to build a
419	   dynamically linked module called "net2280" and force all
420	   gadget drivers to also be dynamically linked.
421
422config USB_GOKU
423	tristate "Toshiba TC86C001 'Goku-S'"
424	depends on PCI
425	help
426	   The Toshiba TC86C001 is a PCI device which includes controllers
427	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
428
429	   The device controller has three configurable (bulk or interrupt)
430	   endpoints, plus endpoint zero (for control transfers).
431
432	   Say "y" to link the driver statically, or "m" to build a
433	   dynamically linked module called "goku_udc" and to force all
434	   gadget drivers to also be dynamically linked.
435
436config USB_EG20T
437	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
438	depends on PCI && GENERIC_HARDIRQS
439	help
440	  This is a USB device driver for EG20T PCH.
441	  EG20T PCH is the platform controller hub that is used in Intel's
442	  general embedded platform. EG20T PCH has USB device interface.
443	  Using this interface, it is able to access system devices connected
444	  to USB device.
445	  This driver enables USB device function.
446	  USB device is a USB peripheral controller which
447	  supports both full and high speed USB 2.0 data transfers.
448	  This driver supports both control transfer and bulk transfer modes.
449	  This driver dose not support interrupt transfer or isochronous
450	  transfer modes.
451
452	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
453	  for IVI(In-Vehicle Infotainment) use.
454	  ML7831 is for general purpose use.
455	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
456	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
457
458#
459# LAST -- dummy/emulated controller
460#
461
462config USB_DUMMY_HCD
463	tristate "Dummy HCD (DEVELOPMENT)"
464	depends on USB=y || (USB=m && USB_GADGET=m)
465	help
466	  This host controller driver emulates USB, looping all data transfer
467	  requests back to a USB "gadget driver" in the same host.  The host
468	  side is the master; the gadget side is the slave.  Gadget drivers
469	  can be high, full, or low speed; and they have access to endpoints
470	  like those from NET2280, PXA2xx, or SA1100 hardware.
471
472	  This may help in some stages of creating a driver to embed in a
473	  Linux device, since it lets you debug several parts of the gadget
474	  driver without its hardware or drivers being involved.
475
476	  Since such a gadget side driver needs to interoperate with a host
477	  side Linux-USB device driver, this may help to debug both sides
478	  of a USB protocol stack.
479
480	  Say "y" to link the driver statically, or "m" to build a
481	  dynamically linked module called "dummy_hcd" and force all
482	  gadget drivers to also be dynamically linked.
483
484# NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
485# first and will be selected by default.
486
487endmenu
488
489#
490# USB Gadget Drivers
491#
492
493# composite based drivers
494config USB_LIBCOMPOSITE
495	tristate
496	depends on USB_GADGET
497
498config USB_F_ACM
499	tristate
500
501config USB_F_SS_LB
502	tristate
503
504config USB_U_SERIAL
505	tristate
506
507choice
508	tristate "USB Gadget Drivers"
509	default USB_ETH
510	help
511	  A Linux "Gadget Driver" talks to the USB Peripheral Controller
512	  driver through the abstract "gadget" API.  Some other operating
513	  systems call these "client" drivers, of which "class drivers"
514	  are a subset (implementing a USB device class specification).
515	  A gadget driver implements one or more USB functions using
516	  the peripheral hardware.
517
518	  Gadget drivers are hardware-neutral, or "platform independent",
519	  except that they sometimes must understand quirks or limitations
520	  of the particular controllers they work with.  For example, when
521	  a controller doesn't support alternate configurations or provide
522	  enough of the right types of endpoints, the gadget driver might
523	  not be able work with that controller, or might need to implement
524	  a less common variant of a device class protocol.
525
526# this first set of drivers all depend on bulk-capable hardware.
527
528config USB_ZERO
529	tristate "Gadget Zero (DEVELOPMENT)"
530	select USB_LIBCOMPOSITE
531	select USB_F_SS_LB
532	help
533	  Gadget Zero is a two-configuration device.  It either sinks and
534	  sources bulk data; or it loops back a configurable number of
535	  transfers.  It also implements control requests, for "chapter 9"
536	  conformance.  The driver needs only two bulk-capable endpoints, so
537	  it can work on top of most device-side usb controllers.  It's
538	  useful for testing, and is also a working example showing how
539	  USB "gadget drivers" can be written.
540
541	  Make this be the first driver you try using on top of any new
542	  USB peripheral controller driver.  Then you can use host-side
543	  test software, like the "usbtest" driver, to put your hardware
544	  and its driver through a basic set of functional tests.
545
546	  Gadget Zero also works with the host-side "usb-skeleton" driver,
547	  and with many kinds of host-side test software.  You may need
548	  to tweak product and vendor IDs before host software knows about
549	  this device, and arrange to select an appropriate configuration.
550
551	  Say "y" to link the driver statically, or "m" to build a
552	  dynamically linked module called "g_zero".
553
554config USB_ZERO_HNPTEST
555	boolean "HNP Test Device"
556	depends on USB_ZERO && USB_OTG
557	help
558	  You can configure this device to enumerate using the device
559	  identifiers of the USB-OTG test device.  That means that when
560	  this gadget connects to another OTG device, with this one using
561	  the "B-Peripheral" role, that device will use HNP to let this
562	  one serve as the USB host instead (in the "B-Host" role).
563
564config USB_AUDIO
565	tristate "Audio Gadget"
566	depends on SND
567	select USB_LIBCOMPOSITE
568	select SND_PCM
569	help
570	  This Gadget Audio driver is compatible with USB Audio Class
571	  specification 2.0. It implements 1 AudioControl interface,
572	  1 AudioStreaming Interface each for USB-OUT and USB-IN.
573	  Number of channels, sample rate and sample size can be
574	  specified as module parameters.
575	  This driver doesn't expect any real Audio codec to be present
576	  on the device - the audio streams are simply sinked to and
577	  sourced from a virtual ALSA sound card created. The user-space
578	  application may choose to do whatever it wants with the data
579	  received from the USB Host and choose to provide whatever it
580	  wants as audio data to the USB Host.
581
582	  Say "y" to link the driver statically, or "m" to build a
583	  dynamically linked module called "g_audio".
584
585config GADGET_UAC1
586	bool "UAC 1.0 (Legacy)"
587	depends on USB_AUDIO
588	help
589	  If you instead want older UAC Spec-1.0 driver that also has audio
590	  paths hardwired to the Audio codec chip on-board and doesn't work
591	  without one.
592
593config USB_ETH
594	tristate "Ethernet Gadget (with CDC Ethernet support)"
595	depends on NET
596	select USB_LIBCOMPOSITE
597	select CRC32
598	help
599	  This driver implements Ethernet style communication, in one of
600	  several ways:
601
602	   - The "Communication Device Class" (CDC) Ethernet Control Model.
603	     That protocol is often avoided with pure Ethernet adapters, in
604	     favor of simpler vendor-specific hardware, but is widely
605	     supported by firmware for smart network devices.
606
607	   - On hardware can't implement that protocol, a simple CDC subset
608	     is used, placing fewer demands on USB.
609
610	   - CDC Ethernet Emulation Model (EEM) is a newer standard that has
611	     a simpler interface that can be used by more USB hardware.
612
613	  RNDIS support is an additional option, more demanding than than
614	  subset.
615
616	  Within the USB device, this gadget driver exposes a network device
617	  "usbX", where X depends on what other networking devices you have.
618	  Treat it like a two-node Ethernet link:  host, and gadget.
619
620	  The Linux-USB host-side "usbnet" driver interoperates with this
621	  driver, so that deep I/O queues can be supported.  On 2.4 kernels,
622	  use "CDCEther" instead, if you're using the CDC option. That CDC
623	  mode should also interoperate with standard CDC Ethernet class
624	  drivers on other host operating systems.
625
626	  Say "y" to link the driver statically, or "m" to build a
627	  dynamically linked module called "g_ether".
628
629config USB_ETH_RNDIS
630	bool "RNDIS support"
631	depends on USB_ETH
632	select USB_LIBCOMPOSITE
633	default y
634	help
635	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
636	   and Microsoft provides redistributable binary RNDIS drivers for
637	   older versions of Windows.
638
639	   If you say "y" here, the Ethernet gadget driver will try to provide
640	   a second device configuration, supporting RNDIS to talk to such
641	   Microsoft USB hosts.
642
643	   To make MS-Windows work with this, use Documentation/usb/linux.inf
644	   as the "driver info file".  For versions of MS-Windows older than
645	   XP, you'll need to download drivers from Microsoft's website; a URL
646	   is given in comments found in that info file.
647
648config USB_ETH_EEM
649       bool "Ethernet Emulation Model (EEM) support"
650       depends on USB_ETH
651	select USB_LIBCOMPOSITE
652       default n
653       help
654         CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
655         and therefore can be supported by more hardware.  Technically ECM and
656         EEM are designed for different applications.  The ECM model extends
657         the network interface to the target (e.g. a USB cable modem), and the
658         EEM model is for mobile devices to communicate with hosts using
659         ethernet over USB.  For Linux gadgets, however, the interface with
660         the host is the same (a usbX device), so the differences are minimal.
661
662         If you say "y" here, the Ethernet gadget driver will use the EEM
663         protocol rather than ECM.  If unsure, say "n".
664
665config USB_G_NCM
666	tristate "Network Control Model (NCM) support"
667	depends on NET
668	select USB_LIBCOMPOSITE
669	select CRC32
670	help
671	  This driver implements USB CDC NCM subclass standard. NCM is
672	  an advanced protocol for Ethernet encapsulation, allows grouping
673	  of several ethernet frames into one USB transfer and different
674	  alignment possibilities.
675
676	  Say "y" to link the driver statically, or "m" to build a
677	  dynamically linked module called "g_ncm".
678
679config USB_GADGETFS
680	tristate "Gadget Filesystem"
681	help
682	  This driver provides a filesystem based API that lets user mode
683	  programs implement a single-configuration USB device, including
684	  endpoint I/O and control requests that don't relate to enumeration.
685	  All endpoints, transfer speeds, and transfer types supported by
686	  the hardware are available, through read() and write() calls.
687
688	  Say "y" to link the driver statically, or "m" to build a
689	  dynamically linked module called "gadgetfs".
690
691config USB_FUNCTIONFS
692	tristate "Function Filesystem"
693	select USB_LIBCOMPOSITE
694	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
695	help
696	  The Function Filesystem (FunctionFS) lets one create USB
697	  composite functions in user space in the same way GadgetFS
698	  lets one create USB gadgets in user space.  This allows creation
699	  of composite gadgets such that some of the functions are
700	  implemented in kernel space (for instance Ethernet, serial or
701	  mass storage) and other are implemented in user space.
702
703	  If you say "y" or "m" here you will be able what kind of
704	  configurations the gadget will provide.
705
706	  Say "y" to link the driver statically, or "m" to build
707	  a dynamically linked module called "g_ffs".
708
709config USB_FUNCTIONFS_ETH
710	bool "Include configuration with CDC ECM (Ethernet)"
711	depends on USB_FUNCTIONFS && NET
712	help
713	  Include a configuration with CDC ECM function (Ethernet) and the
714	  Function Filesystem.
715
716config USB_FUNCTIONFS_RNDIS
717	bool "Include configuration with RNDIS (Ethernet)"
718	depends on USB_FUNCTIONFS && NET
719	help
720	  Include a configuration with RNDIS function (Ethernet) and the Filesystem.
721
722config USB_FUNCTIONFS_GENERIC
723	bool "Include 'pure' configuration"
724	depends on USB_FUNCTIONFS
725	help
726	  Include a configuration with the Function Filesystem alone with
727	  no Ethernet interface.
728
729config USB_MASS_STORAGE
730	tristate "Mass Storage Gadget"
731	depends on BLOCK
732	select USB_LIBCOMPOSITE
733	help
734	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
735	  As its storage repository it can use a regular file or a block
736	  device (in much the same way as the "loop" device driver),
737	  specified as a module parameter or sysfs option.
738
739	  This driver is a replacement for now removed File-backed
740	  Storage Gadget (g_file_storage).
741
742	  Say "y" to link the driver statically, or "m" to build
743	  a dynamically linked module called "g_mass_storage".
744
745config USB_GADGET_TARGET
746	tristate "USB Gadget Target Fabric Module"
747	depends on TARGET_CORE
748	select USB_LIBCOMPOSITE
749	help
750	  This fabric is an USB gadget. Two USB protocols are supported that is
751	  BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
752	  advertised on alternative interface 0 (primary) and UAS is on
753	  alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
754	  UAS utilizes the USB 3.0 feature called streams support.
755
756config USB_G_SERIAL
757	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
758	depends on TTY
759	select USB_U_SERIAL
760	select USB_F_ACM
761	select USB_LIBCOMPOSITE
762	help
763	  The Serial Gadget talks to the Linux-USB generic serial driver.
764	  This driver supports a CDC-ACM module option, which can be used
765	  to interoperate with MS-Windows hosts or with the Linux-USB
766	  "cdc-acm" driver.
767
768	  This driver also supports a CDC-OBEX option.  You will need a
769	  user space OBEX server talking to /dev/ttyGS*, since the kernel
770	  itself doesn't implement the OBEX protocol.
771
772	  Say "y" to link the driver statically, or "m" to build a
773	  dynamically linked module called "g_serial".
774
775	  For more information, see Documentation/usb/gadget_serial.txt
776	  which includes instructions and a "driver info file" needed to
777	  make MS-Windows work with CDC ACM.
778
779config USB_MIDI_GADGET
780	tristate "MIDI Gadget"
781	depends on SND
782	select USB_LIBCOMPOSITE
783	select SND_RAWMIDI
784	help
785	  The MIDI Gadget acts as a USB Audio device, with one MIDI
786	  input and one MIDI output. These MIDI jacks appear as
787	  a sound "card" in the ALSA sound system. Other MIDI
788	  connections can then be made on the gadget system, using
789	  ALSA's aconnect utility etc.
790
791	  Say "y" to link the driver statically, or "m" to build a
792	  dynamically linked module called "g_midi".
793
794config USB_G_PRINTER
795	tristate "Printer Gadget"
796	select USB_LIBCOMPOSITE
797	help
798	  The Printer Gadget channels data between the USB host and a
799	  userspace program driving the print engine. The user space
800	  program reads and writes the device file /dev/g_printer to
801	  receive or send printer data. It can use ioctl calls to
802	  the device file to get or set printer status.
803
804	  Say "y" to link the driver statically, or "m" to build a
805	  dynamically linked module called "g_printer".
806
807	  For more information, see Documentation/usb/gadget_printer.txt
808	  which includes sample code for accessing the device file.
809
810if TTY
811
812config USB_CDC_COMPOSITE
813	tristate "CDC Composite Device (Ethernet and ACM)"
814	depends on NET
815	select USB_LIBCOMPOSITE
816	select USB_U_SERIAL
817	select USB_F_ACM
818	help
819	  This driver provides two functions in one configuration:
820	  a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
821
822	  This driver requires four bulk and two interrupt endpoints,
823	  plus the ability to handle altsettings.  Not all peripheral
824	  controllers are that capable.
825
826	  Say "y" to link the driver statically, or "m" to build a
827	  dynamically linked module.
828
829config USB_G_NOKIA
830	tristate "Nokia composite gadget"
831	depends on PHONET
832	select USB_LIBCOMPOSITE
833	select USB_U_SERIAL
834	select USB_F_ACM
835	help
836	  The Nokia composite gadget provides support for acm, obex
837	  and phonet in only one composite gadget driver.
838
839	  It's only really useful for N900 hardware. If you're building
840	  a kernel for N900, say Y or M here. If unsure, say N.
841
842config USB_G_ACM_MS
843	tristate "CDC Composite Device (ACM and mass storage)"
844	depends on BLOCK
845	select USB_LIBCOMPOSITE
846	select USB_U_SERIAL
847	select USB_F_ACM
848	help
849	  This driver provides two functions in one configuration:
850	  a mass storage, and a CDC ACM (serial port) link.
851
852	  Say "y" to link the driver statically, or "m" to build a
853	  dynamically linked module called "g_acm_ms".
854
855config USB_G_MULTI
856	tristate "Multifunction Composite Gadget"
857	depends on BLOCK && NET
858	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
859	select USB_LIBCOMPOSITE
860	select USB_U_SERIAL
861	select USB_F_ACM
862	help
863	  The Multifunction Composite Gadget provides Ethernet (RNDIS
864	  and/or CDC Ethernet), mass storage and ACM serial link
865	  interfaces.
866
867	  You will be asked to choose which of the two configurations is
868	  to be available in the gadget.  At least one configuration must
869	  be chosen to make the gadget usable.  Selecting more than one
870	  configuration will prevent Windows from automatically detecting
871	  the gadget as a composite gadget, so an INF file will be needed to
872	  use the gadget.
873
874	  Say "y" to link the driver statically, or "m" to build a
875	  dynamically linked module called "g_multi".
876
877config USB_G_MULTI_RNDIS
878	bool "RNDIS + CDC Serial + Storage configuration"
879	depends on USB_G_MULTI
880	default y
881	help
882	  This option enables a configuration with RNDIS, CDC Serial and
883	  Mass Storage functions available in the Multifunction Composite
884	  Gadget.  This is the configuration dedicated for Windows since RNDIS
885	  is Microsoft's protocol.
886
887	  If unsure, say "y".
888
889config USB_G_MULTI_CDC
890	bool "CDC Ethernet + CDC Serial + Storage configuration"
891	depends on USB_G_MULTI
892	default n
893	help
894	  This option enables a configuration with CDC Ethernet (ECM), CDC
895	  Serial and Mass Storage functions available in the Multifunction
896	  Composite Gadget.
897
898	  If unsure, say "y".
899
900endif # TTY
901
902config USB_G_HID
903	tristate "HID Gadget"
904	select USB_LIBCOMPOSITE
905	help
906	  The HID gadget driver provides generic emulation of USB
907	  Human Interface Devices (HID).
908
909	  For more information, see Documentation/usb/gadget_hid.txt which
910	  includes sample code for accessing the device files.
911
912	  Say "y" to link the driver statically, or "m" to build a
913	  dynamically linked module called "g_hid".
914
915# Standalone / single function gadgets
916config USB_G_DBGP
917	tristate "EHCI Debug Device Gadget"
918	depends on TTY
919	select USB_LIBCOMPOSITE
920	help
921	  This gadget emulates an EHCI Debug device. This is useful when you want
922	  to interact with an EHCI Debug Port.
923
924	  Say "y" to link the driver statically, or "m" to build a
925	  dynamically linked module called "g_dbgp".
926
927if USB_G_DBGP
928choice
929	prompt "EHCI Debug Device mode"
930	default USB_G_DBGP_SERIAL
931
932config USB_G_DBGP_PRINTK
933	depends on USB_G_DBGP
934	bool "printk"
935	help
936	  Directly printk() received data. No interaction.
937
938config USB_G_DBGP_SERIAL
939	depends on USB_G_DBGP
940	select USB_U_SERIAL
941	bool "serial"
942	help
943	  Userland can interact using /dev/ttyGSxxx.
944endchoice
945endif
946
947# put drivers that need isochronous transfer support (for audio
948# or video class gadget drivers), or specific hardware, here.
949config USB_G_WEBCAM
950	tristate "USB Webcam Gadget"
951	depends on VIDEO_DEV
952	select USB_LIBCOMPOSITE
953	select VIDEOBUF2_VMALLOC
954	help
955	  The Webcam Gadget acts as a composite USB Audio and Video Class
956	  device. It provides a userspace API to process UVC control requests
957	  and stream video data to the host.
958
959	  Say "y" to link the driver statically, or "m" to build a
960	  dynamically linked module called "g_webcam".
961
962endchoice
963
964endif # USB_GADGET
965