xref: /linux/drivers/usb/dwc3/gadget.h (revision ef9226cd56b718c79184a3466d32984a51cb449c)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * gadget.h - DesignWare USB3 DRD Gadget Header
4  *
5  * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
6  *
7  * Authors: Felipe Balbi <balbi@ti.com>,
8  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9  */
10 
11 #ifndef __DRIVERS_USB_DWC3_GADGET_H
12 #define __DRIVERS_USB_DWC3_GADGET_H
13 
14 #include <linux/list.h>
15 #include <linux/usb/gadget.h>
16 #include "io.h"
17 
18 struct dwc3;
19 #define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
20 #define gadget_to_dwc(g)	(dev_get_platdata(&g->dev))
21 
22 /* DEPCFG parameter 1 */
23 #define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)
24 #define DWC3_DEPCFG_XFER_COMPLETE_EN	BIT(8)
25 #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	BIT(9)
26 #define DWC3_DEPCFG_XFER_NOT_READY_EN	BIT(10)
27 #define DWC3_DEPCFG_FIFO_ERROR_EN	BIT(11)
28 #define DWC3_DEPCFG_STREAM_EVENT_EN	BIT(13)
29 #define DWC3_DEPCFG_BINTERVAL_M1(n)	(((n) & 0xff) << 16)
30 #define DWC3_DEPCFG_STREAM_CAPABLE	BIT(24)
31 #define DWC3_DEPCFG_EP_NUMBER(n)	(((n) & 0x1f) << 25)
32 #define DWC3_DEPCFG_BULK_BASED		BIT(30)
33 #define DWC3_DEPCFG_FIFO_BASED		BIT(31)
34 
35 /* DEPCFG parameter 0 */
36 #define DWC3_DEPCFG_EP_TYPE(n)		(((n) & 0x3) << 1)
37 #define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	(((n) & 0x7ff) << 3)
38 #define DWC3_DEPCFG_FIFO_NUMBER(n)	(((n) & 0x1f) << 17)
39 #define DWC3_DEPCFG_BURST_SIZE(n)	(((n) & 0xf) << 22)
40 #define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
41 /* This applies for core versions earlier than 1.94a */
42 #define DWC3_DEPCFG_IGN_SEQ_NUM		BIT(31)
43 /* These apply for core versions 1.94a and later */
44 #define DWC3_DEPCFG_ACTION_INIT		(0 << 30)
45 #define DWC3_DEPCFG_ACTION_RESTORE	BIT(30)
46 #define DWC3_DEPCFG_ACTION_MODIFY	(2 << 30)
47 
48 /* DEPXFERCFG parameter 0 */
49 #define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
50 
51 /* U1 Device exit Latency */
52 #define DWC3_DEFAULT_U1_DEV_EXIT_LAT	0x0A	/* Less then 10 microsec */
53 
54 /* U2 Device exit Latency */
55 #define DWC3_DEFAULT_U2_DEV_EXIT_LAT	0x1FF	/* Less then 511 microsec */
56 
57 /* Frame/Microframe Number Mask */
58 #define DWC3_FRNUMBER_MASK		0x3fff
59 /* -------------------------------------------------------------------------- */
60 
61 #define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
62 
63 /**
64  * next_request - gets the next request on the given list
65  * @list: the request list to operate on
66  *
67  * Caller should take care of locking. This function return %NULL or the first
68  * request available on @list.
69  */
70 static inline struct dwc3_request *next_request(struct list_head *list)
71 {
72 	return list_first_entry_or_null(list, struct dwc3_request, list);
73 }
74 
75 /**
76  * dwc3_gadget_move_started_request - move @req to the started_list
77  * @req: the request to be moved
78  *
79  * Caller should take care of locking. This function will move @req from its
80  * current list to the endpoint's started_list.
81  */
82 static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
83 {
84 	struct dwc3_ep		*dep = req->dep;
85 
86 	req->status = DWC3_REQUEST_STATUS_STARTED;
87 	list_move_tail(&req->list, &dep->started_list);
88 }
89 
90 /**
91  * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list
92  * @req: the request to be moved
93  * @reason: cancelled reason for the dwc3 request
94  *
95  * Caller should take care of locking. This function will move @req from its
96  * current list to the endpoint's cancelled_list.
97  */
98 static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req,
99 		unsigned int reason)
100 {
101 	struct dwc3_ep		*dep = req->dep;
102 
103 	req->status = reason;
104 	list_move_tail(&req->list, &dep->cancelled_list);
105 }
106 
107 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
108 		int status);
109 
110 void dwc3_ep0_interrupt(struct dwc3 *dwc,
111 		const struct dwc3_event_depevt *event);
112 void dwc3_ep0_out_start(struct dwc3 *dwc);
113 void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep);
114 void dwc3_ep0_stall_and_restart(struct dwc3 *dwc);
115 int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
116 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
117 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
118 		gfp_t gfp_flags);
119 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
120 void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
121 void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt);
122 int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index);
123 
124 /**
125  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
126  * @dep: dwc3 endpoint
127  *
128  * Caller should take care of locking. Returns the transfer resource
129  * index for a given endpoint.
130  */
131 static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)
132 {
133 	u32			res_id;
134 
135 	res_id = dwc3_readl(dep->regs, DWC3_DEPCMD);
136 	dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id);
137 }
138 
139 /**
140  * dwc3_gadget_dctl_write_safe - write to DCTL safe from link state change
141  * @dwc: pointer to our context structure
142  * @value: value to write to DCTL
143  *
144  * Use this function when doing read-modify-write to DCTL. It will not
145  * send link state change request.
146  */
147 static inline void dwc3_gadget_dctl_write_safe(struct dwc3 *dwc, u32 value)
148 {
149 	value &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
150 	dwc3_writel(dwc->regs, DWC3_DCTL, value);
151 }
152 
153 #endif /* __DRIVERS_USB_DWC3_GADGET_H */
154