1 /** 2 * core.c - DesignWare USB3 DRD Controller Core file 3 * 4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com 5 * 6 * Authors: Felipe Balbi <balbi@ti.com>, 7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de> 8 * 9 * This program is free software: you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 of 11 * the License as published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program. If not, see <http://www.gnu.org/licenses/>. 20 */ 21 22 #include <linux/version.h> 23 #include <linux/module.h> 24 #include <linux/kernel.h> 25 #include <linux/slab.h> 26 #include <linux/spinlock.h> 27 #include <linux/platform_device.h> 28 #include <linux/pm_runtime.h> 29 #include <linux/interrupt.h> 30 #include <linux/ioport.h> 31 #include <linux/io.h> 32 #include <linux/list.h> 33 #include <linux/delay.h> 34 #include <linux/dma-mapping.h> 35 #include <linux/of.h> 36 #include <linux/acpi.h> 37 #include <linux/pinctrl/consumer.h> 38 39 #include <linux/usb/ch9.h> 40 #include <linux/usb/gadget.h> 41 #include <linux/usb/of.h> 42 #include <linux/usb/otg.h> 43 44 #include "platform_data.h" 45 #include "core.h" 46 #include "gadget.h" 47 #include "io.h" 48 49 #include "debug.h" 50 51 /* -------------------------------------------------------------------------- */ 52 53 void dwc3_set_mode(struct dwc3 *dwc, u32 mode) 54 { 55 u32 reg; 56 57 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 58 reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); 59 reg |= DWC3_GCTL_PRTCAPDIR(mode); 60 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 61 } 62 63 /** 64 * dwc3_core_soft_reset - Issues core soft reset and PHY reset 65 * @dwc: pointer to our context structure 66 */ 67 static int dwc3_core_soft_reset(struct dwc3 *dwc) 68 { 69 u32 reg; 70 int ret; 71 72 /* Before Resetting PHY, put Core in Reset */ 73 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 74 reg |= DWC3_GCTL_CORESOFTRESET; 75 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 76 77 /* Assert USB3 PHY reset */ 78 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); 79 reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; 80 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); 81 82 /* Assert USB2 PHY reset */ 83 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); 84 reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; 85 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 86 87 usb_phy_init(dwc->usb2_phy); 88 usb_phy_init(dwc->usb3_phy); 89 ret = phy_init(dwc->usb2_generic_phy); 90 if (ret < 0) 91 return ret; 92 93 ret = phy_init(dwc->usb3_generic_phy); 94 if (ret < 0) { 95 phy_exit(dwc->usb2_generic_phy); 96 return ret; 97 } 98 mdelay(100); 99 100 /* Clear USB3 PHY reset */ 101 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); 102 reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; 103 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); 104 105 /* Clear USB2 PHY reset */ 106 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); 107 reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; 108 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 109 110 mdelay(100); 111 112 /* After PHYs are stable we can take Core out of reset state */ 113 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 114 reg &= ~DWC3_GCTL_CORESOFTRESET; 115 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 116 117 return 0; 118 } 119 120 /** 121 * dwc3_soft_reset - Issue soft reset 122 * @dwc: Pointer to our controller context structure 123 */ 124 static int dwc3_soft_reset(struct dwc3 *dwc) 125 { 126 unsigned long timeout; 127 u32 reg; 128 129 timeout = jiffies + msecs_to_jiffies(500); 130 dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); 131 do { 132 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 133 if (!(reg & DWC3_DCTL_CSFTRST)) 134 break; 135 136 if (time_after(jiffies, timeout)) { 137 dev_err(dwc->dev, "Reset Timed Out\n"); 138 return -ETIMEDOUT; 139 } 140 141 cpu_relax(); 142 } while (true); 143 144 return 0; 145 } 146 147 /* 148 * dwc3_frame_length_adjustment - Adjusts frame length if required 149 * @dwc3: Pointer to our controller context structure 150 * @fladj: Value of GFLADJ_30MHZ to adjust frame length 151 */ 152 static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj) 153 { 154 u32 reg; 155 u32 dft; 156 157 if (dwc->revision < DWC3_REVISION_250A) 158 return; 159 160 if (fladj == 0) 161 return; 162 163 reg = dwc3_readl(dwc->regs, DWC3_GFLADJ); 164 dft = reg & DWC3_GFLADJ_30MHZ_MASK; 165 if (!dev_WARN_ONCE(dwc->dev, dft == fladj, 166 "request value same as default, ignoring\n")) { 167 reg &= ~DWC3_GFLADJ_30MHZ_MASK; 168 reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj; 169 dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); 170 } 171 } 172 173 /** 174 * dwc3_free_one_event_buffer - Frees one event buffer 175 * @dwc: Pointer to our controller context structure 176 * @evt: Pointer to event buffer to be freed 177 */ 178 static void dwc3_free_one_event_buffer(struct dwc3 *dwc, 179 struct dwc3_event_buffer *evt) 180 { 181 dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); 182 } 183 184 /** 185 * dwc3_alloc_one_event_buffer - Allocates one event buffer structure 186 * @dwc: Pointer to our controller context structure 187 * @length: size of the event buffer 188 * 189 * Returns a pointer to the allocated event buffer structure on success 190 * otherwise ERR_PTR(errno). 191 */ 192 static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, 193 unsigned length) 194 { 195 struct dwc3_event_buffer *evt; 196 197 evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); 198 if (!evt) 199 return ERR_PTR(-ENOMEM); 200 201 evt->dwc = dwc; 202 evt->length = length; 203 evt->buf = dma_alloc_coherent(dwc->dev, length, 204 &evt->dma, GFP_KERNEL); 205 if (!evt->buf) 206 return ERR_PTR(-ENOMEM); 207 208 return evt; 209 } 210 211 /** 212 * dwc3_free_event_buffers - frees all allocated event buffers 213 * @dwc: Pointer to our controller context structure 214 */ 215 static void dwc3_free_event_buffers(struct dwc3 *dwc) 216 { 217 struct dwc3_event_buffer *evt; 218 int i; 219 220 for (i = 0; i < dwc->num_event_buffers; i++) { 221 evt = dwc->ev_buffs[i]; 222 if (evt) 223 dwc3_free_one_event_buffer(dwc, evt); 224 } 225 } 226 227 /** 228 * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length 229 * @dwc: pointer to our controller context structure 230 * @length: size of event buffer 231 * 232 * Returns 0 on success otherwise negative errno. In the error case, dwc 233 * may contain some buffers allocated but not all which were requested. 234 */ 235 static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) 236 { 237 int num; 238 int i; 239 240 num = DWC3_NUM_INT(dwc->hwparams.hwparams1); 241 dwc->num_event_buffers = num; 242 243 dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, 244 GFP_KERNEL); 245 if (!dwc->ev_buffs) 246 return -ENOMEM; 247 248 for (i = 0; i < num; i++) { 249 struct dwc3_event_buffer *evt; 250 251 evt = dwc3_alloc_one_event_buffer(dwc, length); 252 if (IS_ERR(evt)) { 253 dev_err(dwc->dev, "can't allocate event buffer\n"); 254 return PTR_ERR(evt); 255 } 256 dwc->ev_buffs[i] = evt; 257 } 258 259 return 0; 260 } 261 262 /** 263 * dwc3_event_buffers_setup - setup our allocated event buffers 264 * @dwc: pointer to our controller context structure 265 * 266 * Returns 0 on success otherwise negative errno. 267 */ 268 static int dwc3_event_buffers_setup(struct dwc3 *dwc) 269 { 270 struct dwc3_event_buffer *evt; 271 int n; 272 273 for (n = 0; n < dwc->num_event_buffers; n++) { 274 evt = dwc->ev_buffs[n]; 275 dwc3_trace(trace_dwc3_core, 276 "Event buf %p dma %08llx length %d\n", 277 evt->buf, (unsigned long long) evt->dma, 278 evt->length); 279 280 evt->lpos = 0; 281 282 dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 283 lower_32_bits(evt->dma)); 284 dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 285 upper_32_bits(evt->dma)); 286 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 287 DWC3_GEVNTSIZ_SIZE(evt->length)); 288 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); 289 } 290 291 return 0; 292 } 293 294 static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) 295 { 296 struct dwc3_event_buffer *evt; 297 int n; 298 299 for (n = 0; n < dwc->num_event_buffers; n++) { 300 evt = dwc->ev_buffs[n]; 301 302 evt->lpos = 0; 303 304 dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); 305 dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); 306 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK 307 | DWC3_GEVNTSIZ_SIZE(0)); 308 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); 309 } 310 } 311 312 static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) 313 { 314 if (!dwc->has_hibernation) 315 return 0; 316 317 if (!dwc->nr_scratch) 318 return 0; 319 320 dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, 321 DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); 322 if (!dwc->scratchbuf) 323 return -ENOMEM; 324 325 return 0; 326 } 327 328 static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) 329 { 330 dma_addr_t scratch_addr; 331 u32 param; 332 int ret; 333 334 if (!dwc->has_hibernation) 335 return 0; 336 337 if (!dwc->nr_scratch) 338 return 0; 339 340 /* should never fall here */ 341 if (!WARN_ON(dwc->scratchbuf)) 342 return 0; 343 344 scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf, 345 dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, 346 DMA_BIDIRECTIONAL); 347 if (dma_mapping_error(dwc->dev, scratch_addr)) { 348 dev_err(dwc->dev, "failed to map scratch buffer\n"); 349 ret = -EFAULT; 350 goto err0; 351 } 352 353 dwc->scratch_addr = scratch_addr; 354 355 param = lower_32_bits(scratch_addr); 356 357 ret = dwc3_send_gadget_generic_command(dwc, 358 DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); 359 if (ret < 0) 360 goto err1; 361 362 param = upper_32_bits(scratch_addr); 363 364 ret = dwc3_send_gadget_generic_command(dwc, 365 DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); 366 if (ret < 0) 367 goto err1; 368 369 return 0; 370 371 err1: 372 dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * 373 DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); 374 375 err0: 376 return ret; 377 } 378 379 static void dwc3_free_scratch_buffers(struct dwc3 *dwc) 380 { 381 if (!dwc->has_hibernation) 382 return; 383 384 if (!dwc->nr_scratch) 385 return; 386 387 /* should never fall here */ 388 if (!WARN_ON(dwc->scratchbuf)) 389 return; 390 391 dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * 392 DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); 393 kfree(dwc->scratchbuf); 394 } 395 396 static void dwc3_core_num_eps(struct dwc3 *dwc) 397 { 398 struct dwc3_hwparams *parms = &dwc->hwparams; 399 400 dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); 401 dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; 402 403 dwc3_trace(trace_dwc3_core, "found %d IN and %d OUT endpoints", 404 dwc->num_in_eps, dwc->num_out_eps); 405 } 406 407 static void dwc3_cache_hwparams(struct dwc3 *dwc) 408 { 409 struct dwc3_hwparams *parms = &dwc->hwparams; 410 411 parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); 412 parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); 413 parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); 414 parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); 415 parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); 416 parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); 417 parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); 418 parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); 419 parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); 420 } 421 422 /** 423 * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core 424 * @dwc: Pointer to our controller context structure 425 * 426 * Returns 0 on success. The USB PHY interfaces are configured but not 427 * initialized. The PHY interfaces and the PHYs get initialized together with 428 * the core in dwc3_core_init. 429 */ 430 static int dwc3_phy_setup(struct dwc3 *dwc) 431 { 432 u32 reg; 433 int ret; 434 435 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); 436 437 /* 438 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY 439 * to '0' during coreConsultant configuration. So default value 440 * will be '0' when the core is reset. Application needs to set it 441 * to '1' after the core initialization is completed. 442 */ 443 if (dwc->revision > DWC3_REVISION_194A) 444 reg |= DWC3_GUSB3PIPECTL_SUSPHY; 445 446 if (dwc->u2ss_inp3_quirk) 447 reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; 448 449 if (dwc->req_p1p2p3_quirk) 450 reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; 451 452 if (dwc->del_p1p2p3_quirk) 453 reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN; 454 455 if (dwc->del_phy_power_chg_quirk) 456 reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE; 457 458 if (dwc->lfps_filter_quirk) 459 reg |= DWC3_GUSB3PIPECTL_LFPSFILT; 460 461 if (dwc->rx_detect_poll_quirk) 462 reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL; 463 464 if (dwc->tx_de_emphasis_quirk) 465 reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); 466 467 if (dwc->dis_u3_susphy_quirk) 468 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; 469 470 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); 471 472 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); 473 474 /* Select the HS PHY interface */ 475 switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { 476 case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI: 477 if (dwc->hsphy_interface && 478 !strncmp(dwc->hsphy_interface, "utmi", 4)) { 479 reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI; 480 break; 481 } else if (dwc->hsphy_interface && 482 !strncmp(dwc->hsphy_interface, "ulpi", 4)) { 483 reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; 484 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 485 } else { 486 /* Relying on default value. */ 487 if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) 488 break; 489 } 490 /* FALLTHROUGH */ 491 case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: 492 /* Making sure the interface and PHY are operational */ 493 ret = dwc3_soft_reset(dwc); 494 if (ret) 495 return ret; 496 497 udelay(1); 498 499 ret = dwc3_ulpi_init(dwc); 500 if (ret) 501 return ret; 502 /* FALLTHROUGH */ 503 default: 504 break; 505 } 506 507 /* 508 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to 509 * '0' during coreConsultant configuration. So default value will 510 * be '0' when the core is reset. Application needs to set it to 511 * '1' after the core initialization is completed. 512 */ 513 if (dwc->revision > DWC3_REVISION_194A) 514 reg |= DWC3_GUSB2PHYCFG_SUSPHY; 515 516 if (dwc->dis_u2_susphy_quirk) 517 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; 518 519 if (dwc->dis_enblslpm_quirk) 520 reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; 521 522 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 523 524 return 0; 525 } 526 527 /** 528 * dwc3_core_init - Low-level initialization of DWC3 Core 529 * @dwc: Pointer to our controller context structure 530 * 531 * Returns 0 on success otherwise negative errno. 532 */ 533 static int dwc3_core_init(struct dwc3 *dwc) 534 { 535 u32 hwparams4 = dwc->hwparams.hwparams4; 536 u32 reg; 537 int ret; 538 539 reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); 540 /* This should read as U3 followed by revision number */ 541 if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) { 542 /* Detected DWC_usb3 IP */ 543 dwc->revision = reg; 544 } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) { 545 /* Detected DWC_usb31 IP */ 546 dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); 547 dwc->revision |= DWC3_REVISION_IS_DWC31; 548 } else { 549 dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); 550 ret = -ENODEV; 551 goto err0; 552 } 553 554 /* 555 * Write Linux Version Code to our GUID register so it's easy to figure 556 * out which kernel version a bug was found. 557 */ 558 dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE); 559 560 /* Handle USB2.0-only core configuration */ 561 if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == 562 DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { 563 if (dwc->maximum_speed == USB_SPEED_SUPER) 564 dwc->maximum_speed = USB_SPEED_HIGH; 565 } 566 567 /* issue device SoftReset too */ 568 ret = dwc3_soft_reset(dwc); 569 if (ret) 570 goto err0; 571 572 ret = dwc3_core_soft_reset(dwc); 573 if (ret) 574 goto err0; 575 576 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 577 reg &= ~DWC3_GCTL_SCALEDOWN_MASK; 578 579 switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { 580 case DWC3_GHWPARAMS1_EN_PWROPT_CLK: 581 /** 582 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an 583 * issue which would cause xHCI compliance tests to fail. 584 * 585 * Because of that we cannot enable clock gating on such 586 * configurations. 587 * 588 * Refers to: 589 * 590 * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based 591 * SOF/ITP Mode Used 592 */ 593 if ((dwc->dr_mode == USB_DR_MODE_HOST || 594 dwc->dr_mode == USB_DR_MODE_OTG) && 595 (dwc->revision >= DWC3_REVISION_210A && 596 dwc->revision <= DWC3_REVISION_250A)) 597 reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; 598 else 599 reg &= ~DWC3_GCTL_DSBLCLKGTNG; 600 break; 601 case DWC3_GHWPARAMS1_EN_PWROPT_HIB: 602 /* enable hibernation here */ 603 dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); 604 605 /* 606 * REVISIT Enabling this bit so that host-mode hibernation 607 * will work. Device-mode hibernation is not yet implemented. 608 */ 609 reg |= DWC3_GCTL_GBLHIBERNATIONEN; 610 break; 611 default: 612 dwc3_trace(trace_dwc3_core, "No power optimization available\n"); 613 } 614 615 /* check if current dwc3 is on simulation board */ 616 if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { 617 dwc3_trace(trace_dwc3_core, 618 "running on FPGA platform\n"); 619 dwc->is_fpga = true; 620 } 621 622 WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga, 623 "disable_scramble cannot be used on non-FPGA builds\n"); 624 625 if (dwc->disable_scramble_quirk && dwc->is_fpga) 626 reg |= DWC3_GCTL_DISSCRAMBLE; 627 else 628 reg &= ~DWC3_GCTL_DISSCRAMBLE; 629 630 if (dwc->u2exit_lfps_quirk) 631 reg |= DWC3_GCTL_U2EXIT_LFPS; 632 633 /* 634 * WORKAROUND: DWC3 revisions <1.90a have a bug 635 * where the device can fail to connect at SuperSpeed 636 * and falls back to high-speed mode which causes 637 * the device to enter a Connect/Disconnect loop 638 */ 639 if (dwc->revision < DWC3_REVISION_190A) 640 reg |= DWC3_GCTL_U2RSTECN; 641 642 dwc3_core_num_eps(dwc); 643 644 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 645 646 ret = dwc3_alloc_scratch_buffers(dwc); 647 if (ret) 648 goto err1; 649 650 ret = dwc3_setup_scratch_buffers(dwc); 651 if (ret) 652 goto err2; 653 654 return 0; 655 656 err2: 657 dwc3_free_scratch_buffers(dwc); 658 659 err1: 660 usb_phy_shutdown(dwc->usb2_phy); 661 usb_phy_shutdown(dwc->usb3_phy); 662 phy_exit(dwc->usb2_generic_phy); 663 phy_exit(dwc->usb3_generic_phy); 664 665 err0: 666 return ret; 667 } 668 669 static void dwc3_core_exit(struct dwc3 *dwc) 670 { 671 dwc3_free_scratch_buffers(dwc); 672 usb_phy_shutdown(dwc->usb2_phy); 673 usb_phy_shutdown(dwc->usb3_phy); 674 phy_exit(dwc->usb2_generic_phy); 675 phy_exit(dwc->usb3_generic_phy); 676 } 677 678 static int dwc3_core_get_phy(struct dwc3 *dwc) 679 { 680 struct device *dev = dwc->dev; 681 struct device_node *node = dev->of_node; 682 int ret; 683 684 if (node) { 685 dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); 686 dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); 687 } else { 688 dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); 689 dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); 690 } 691 692 if (IS_ERR(dwc->usb2_phy)) { 693 ret = PTR_ERR(dwc->usb2_phy); 694 if (ret == -ENXIO || ret == -ENODEV) { 695 dwc->usb2_phy = NULL; 696 } else if (ret == -EPROBE_DEFER) { 697 return ret; 698 } else { 699 dev_err(dev, "no usb2 phy configured\n"); 700 return ret; 701 } 702 } 703 704 if (IS_ERR(dwc->usb3_phy)) { 705 ret = PTR_ERR(dwc->usb3_phy); 706 if (ret == -ENXIO || ret == -ENODEV) { 707 dwc->usb3_phy = NULL; 708 } else if (ret == -EPROBE_DEFER) { 709 return ret; 710 } else { 711 dev_err(dev, "no usb3 phy configured\n"); 712 return ret; 713 } 714 } 715 716 dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); 717 if (IS_ERR(dwc->usb2_generic_phy)) { 718 ret = PTR_ERR(dwc->usb2_generic_phy); 719 if (ret == -ENOSYS || ret == -ENODEV) { 720 dwc->usb2_generic_phy = NULL; 721 } else if (ret == -EPROBE_DEFER) { 722 return ret; 723 } else { 724 dev_err(dev, "no usb2 phy configured\n"); 725 return ret; 726 } 727 } 728 729 dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); 730 if (IS_ERR(dwc->usb3_generic_phy)) { 731 ret = PTR_ERR(dwc->usb3_generic_phy); 732 if (ret == -ENOSYS || ret == -ENODEV) { 733 dwc->usb3_generic_phy = NULL; 734 } else if (ret == -EPROBE_DEFER) { 735 return ret; 736 } else { 737 dev_err(dev, "no usb3 phy configured\n"); 738 return ret; 739 } 740 } 741 742 return 0; 743 } 744 745 static int dwc3_core_init_mode(struct dwc3 *dwc) 746 { 747 struct device *dev = dwc->dev; 748 int ret; 749 750 switch (dwc->dr_mode) { 751 case USB_DR_MODE_PERIPHERAL: 752 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); 753 ret = dwc3_gadget_init(dwc); 754 if (ret) { 755 dev_err(dev, "failed to initialize gadget\n"); 756 return ret; 757 } 758 break; 759 case USB_DR_MODE_HOST: 760 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); 761 ret = dwc3_host_init(dwc); 762 if (ret) { 763 dev_err(dev, "failed to initialize host\n"); 764 return ret; 765 } 766 break; 767 case USB_DR_MODE_OTG: 768 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); 769 ret = dwc3_host_init(dwc); 770 if (ret) { 771 dev_err(dev, "failed to initialize host\n"); 772 return ret; 773 } 774 775 ret = dwc3_gadget_init(dwc); 776 if (ret) { 777 dev_err(dev, "failed to initialize gadget\n"); 778 return ret; 779 } 780 break; 781 default: 782 dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); 783 return -EINVAL; 784 } 785 786 return 0; 787 } 788 789 static void dwc3_core_exit_mode(struct dwc3 *dwc) 790 { 791 switch (dwc->dr_mode) { 792 case USB_DR_MODE_PERIPHERAL: 793 dwc3_gadget_exit(dwc); 794 break; 795 case USB_DR_MODE_HOST: 796 dwc3_host_exit(dwc); 797 break; 798 case USB_DR_MODE_OTG: 799 dwc3_host_exit(dwc); 800 dwc3_gadget_exit(dwc); 801 break; 802 default: 803 /* do nothing */ 804 break; 805 } 806 } 807 808 #define DWC3_ALIGN_MASK (16 - 1) 809 810 static int dwc3_probe(struct platform_device *pdev) 811 { 812 struct device *dev = &pdev->dev; 813 struct dwc3_platform_data *pdata = dev_get_platdata(dev); 814 struct resource *res; 815 struct dwc3 *dwc; 816 u8 lpm_nyet_threshold; 817 u8 tx_de_emphasis; 818 u8 hird_threshold; 819 u32 fladj = 0; 820 821 int ret; 822 823 void __iomem *regs; 824 void *mem; 825 826 mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); 827 if (!mem) 828 return -ENOMEM; 829 830 dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); 831 dwc->mem = mem; 832 dwc->dev = dev; 833 834 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 835 if (!res) { 836 dev_err(dev, "missing IRQ\n"); 837 return -ENODEV; 838 } 839 dwc->xhci_resources[1].start = res->start; 840 dwc->xhci_resources[1].end = res->end; 841 dwc->xhci_resources[1].flags = res->flags; 842 dwc->xhci_resources[1].name = res->name; 843 844 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 845 if (!res) { 846 dev_err(dev, "missing memory resource\n"); 847 return -ENODEV; 848 } 849 850 dwc->xhci_resources[0].start = res->start; 851 dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + 852 DWC3_XHCI_REGS_END; 853 dwc->xhci_resources[0].flags = res->flags; 854 dwc->xhci_resources[0].name = res->name; 855 856 res->start += DWC3_GLOBALS_REGS_START; 857 858 /* 859 * Request memory region but exclude xHCI regs, 860 * since it will be requested by the xhci-plat driver. 861 */ 862 regs = devm_ioremap_resource(dev, res); 863 if (IS_ERR(regs)) { 864 ret = PTR_ERR(regs); 865 goto err0; 866 } 867 868 dwc->regs = regs; 869 dwc->regs_size = resource_size(res); 870 871 /* default to highest possible threshold */ 872 lpm_nyet_threshold = 0xff; 873 874 /* default to -3.5dB de-emphasis */ 875 tx_de_emphasis = 1; 876 877 /* 878 * default to assert utmi_sleep_n and use maximum allowed HIRD 879 * threshold value of 0b1100 880 */ 881 hird_threshold = 12; 882 883 dwc->maximum_speed = usb_get_maximum_speed(dev); 884 dwc->dr_mode = usb_get_dr_mode(dev); 885 886 dwc->has_lpm_erratum = device_property_read_bool(dev, 887 "snps,has-lpm-erratum"); 888 device_property_read_u8(dev, "snps,lpm-nyet-threshold", 889 &lpm_nyet_threshold); 890 dwc->is_utmi_l1_suspend = device_property_read_bool(dev, 891 "snps,is-utmi-l1-suspend"); 892 device_property_read_u8(dev, "snps,hird-threshold", 893 &hird_threshold); 894 dwc->usb3_lpm_capable = device_property_read_bool(dev, 895 "snps,usb3_lpm_capable"); 896 897 dwc->needs_fifo_resize = device_property_read_bool(dev, 898 "tx-fifo-resize"); 899 900 dwc->disable_scramble_quirk = device_property_read_bool(dev, 901 "snps,disable_scramble_quirk"); 902 dwc->u2exit_lfps_quirk = device_property_read_bool(dev, 903 "snps,u2exit_lfps_quirk"); 904 dwc->u2ss_inp3_quirk = device_property_read_bool(dev, 905 "snps,u2ss_inp3_quirk"); 906 dwc->req_p1p2p3_quirk = device_property_read_bool(dev, 907 "snps,req_p1p2p3_quirk"); 908 dwc->del_p1p2p3_quirk = device_property_read_bool(dev, 909 "snps,del_p1p2p3_quirk"); 910 dwc->del_phy_power_chg_quirk = device_property_read_bool(dev, 911 "snps,del_phy_power_chg_quirk"); 912 dwc->lfps_filter_quirk = device_property_read_bool(dev, 913 "snps,lfps_filter_quirk"); 914 dwc->rx_detect_poll_quirk = device_property_read_bool(dev, 915 "snps,rx_detect_poll_quirk"); 916 dwc->dis_u3_susphy_quirk = device_property_read_bool(dev, 917 "snps,dis_u3_susphy_quirk"); 918 dwc->dis_u2_susphy_quirk = device_property_read_bool(dev, 919 "snps,dis_u2_susphy_quirk"); 920 dwc->dis_enblslpm_quirk = device_property_read_bool(dev, 921 "snps,dis_enblslpm_quirk"); 922 923 dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, 924 "snps,tx_de_emphasis_quirk"); 925 device_property_read_u8(dev, "snps,tx_de_emphasis", 926 &tx_de_emphasis); 927 device_property_read_string(dev, "snps,hsphy_interface", 928 &dwc->hsphy_interface); 929 device_property_read_u32(dev, "snps,quirk-frame-length-adjustment", 930 &fladj); 931 932 if (pdata) { 933 dwc->maximum_speed = pdata->maximum_speed; 934 dwc->has_lpm_erratum = pdata->has_lpm_erratum; 935 if (pdata->lpm_nyet_threshold) 936 lpm_nyet_threshold = pdata->lpm_nyet_threshold; 937 dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend; 938 if (pdata->hird_threshold) 939 hird_threshold = pdata->hird_threshold; 940 941 dwc->needs_fifo_resize = pdata->tx_fifo_resize; 942 dwc->usb3_lpm_capable = pdata->usb3_lpm_capable; 943 dwc->dr_mode = pdata->dr_mode; 944 945 dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; 946 dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk; 947 dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk; 948 dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk; 949 dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk; 950 dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk; 951 dwc->lfps_filter_quirk = pdata->lfps_filter_quirk; 952 dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk; 953 dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk; 954 dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk; 955 dwc->dis_enblslpm_quirk = pdata->dis_enblslpm_quirk; 956 957 dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk; 958 if (pdata->tx_de_emphasis) 959 tx_de_emphasis = pdata->tx_de_emphasis; 960 961 dwc->hsphy_interface = pdata->hsphy_interface; 962 fladj = pdata->fladj_value; 963 } 964 965 dwc->lpm_nyet_threshold = lpm_nyet_threshold; 966 dwc->tx_de_emphasis = tx_de_emphasis; 967 968 dwc->hird_threshold = hird_threshold 969 | (dwc->is_utmi_l1_suspend << 4); 970 971 platform_set_drvdata(pdev, dwc); 972 dwc3_cache_hwparams(dwc); 973 974 ret = dwc3_phy_setup(dwc); 975 if (ret) 976 goto err0; 977 978 ret = dwc3_core_get_phy(dwc); 979 if (ret) 980 goto err0; 981 982 spin_lock_init(&dwc->lock); 983 984 if (!dev->dma_mask) { 985 dev->dma_mask = dev->parent->dma_mask; 986 dev->dma_parms = dev->parent->dma_parms; 987 dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); 988 } 989 990 pm_runtime_enable(dev); 991 pm_runtime_get_sync(dev); 992 pm_runtime_forbid(dev); 993 994 ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); 995 if (ret) { 996 dev_err(dwc->dev, "failed to allocate event buffers\n"); 997 ret = -ENOMEM; 998 goto err1; 999 } 1000 1001 if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) 1002 dwc->dr_mode = USB_DR_MODE_HOST; 1003 else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) 1004 dwc->dr_mode = USB_DR_MODE_PERIPHERAL; 1005 1006 if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) 1007 dwc->dr_mode = USB_DR_MODE_OTG; 1008 1009 ret = dwc3_core_init(dwc); 1010 if (ret) { 1011 dev_err(dev, "failed to initialize core\n"); 1012 goto err1; 1013 } 1014 1015 /* Check the maximum_speed parameter */ 1016 switch (dwc->maximum_speed) { 1017 case USB_SPEED_LOW: 1018 case USB_SPEED_FULL: 1019 case USB_SPEED_HIGH: 1020 case USB_SPEED_SUPER: 1021 case USB_SPEED_SUPER_PLUS: 1022 break; 1023 default: 1024 dev_err(dev, "invalid maximum_speed parameter %d\n", 1025 dwc->maximum_speed); 1026 /* fall through */ 1027 case USB_SPEED_UNKNOWN: 1028 /* default to superspeed */ 1029 dwc->maximum_speed = USB_SPEED_SUPER; 1030 1031 /* 1032 * default to superspeed plus if we are capable. 1033 */ 1034 if (dwc3_is_usb31(dwc) && 1035 (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == 1036 DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) 1037 dwc->maximum_speed = USB_SPEED_SUPER_PLUS; 1038 1039 break; 1040 } 1041 1042 /* Adjust Frame Length */ 1043 dwc3_frame_length_adjustment(dwc, fladj); 1044 1045 usb_phy_set_suspend(dwc->usb2_phy, 0); 1046 usb_phy_set_suspend(dwc->usb3_phy, 0); 1047 ret = phy_power_on(dwc->usb2_generic_phy); 1048 if (ret < 0) 1049 goto err2; 1050 1051 ret = phy_power_on(dwc->usb3_generic_phy); 1052 if (ret < 0) 1053 goto err3; 1054 1055 ret = dwc3_event_buffers_setup(dwc); 1056 if (ret) { 1057 dev_err(dwc->dev, "failed to setup event buffers\n"); 1058 goto err4; 1059 } 1060 1061 ret = dwc3_core_init_mode(dwc); 1062 if (ret) 1063 goto err5; 1064 1065 ret = dwc3_debugfs_init(dwc); 1066 if (ret) { 1067 dev_err(dev, "failed to initialize debugfs\n"); 1068 goto err6; 1069 } 1070 1071 pm_runtime_allow(dev); 1072 1073 return 0; 1074 1075 err6: 1076 dwc3_core_exit_mode(dwc); 1077 1078 err5: 1079 dwc3_event_buffers_cleanup(dwc); 1080 1081 err4: 1082 phy_power_off(dwc->usb3_generic_phy); 1083 1084 err3: 1085 phy_power_off(dwc->usb2_generic_phy); 1086 1087 err2: 1088 usb_phy_set_suspend(dwc->usb2_phy, 1); 1089 usb_phy_set_suspend(dwc->usb3_phy, 1); 1090 dwc3_core_exit(dwc); 1091 1092 err1: 1093 dwc3_free_event_buffers(dwc); 1094 dwc3_ulpi_exit(dwc); 1095 1096 err0: 1097 /* 1098 * restore res->start back to its original value so that, in case the 1099 * probe is deferred, we don't end up getting error in request the 1100 * memory region the next time probe is called. 1101 */ 1102 res->start -= DWC3_GLOBALS_REGS_START; 1103 1104 return ret; 1105 } 1106 1107 static int dwc3_remove(struct platform_device *pdev) 1108 { 1109 struct dwc3 *dwc = platform_get_drvdata(pdev); 1110 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1111 1112 /* 1113 * restore res->start back to its original value so that, in case the 1114 * probe is deferred, we don't end up getting error in request the 1115 * memory region the next time probe is called. 1116 */ 1117 res->start -= DWC3_GLOBALS_REGS_START; 1118 1119 dwc3_debugfs_exit(dwc); 1120 dwc3_core_exit_mode(dwc); 1121 dwc3_event_buffers_cleanup(dwc); 1122 dwc3_free_event_buffers(dwc); 1123 1124 usb_phy_set_suspend(dwc->usb2_phy, 1); 1125 usb_phy_set_suspend(dwc->usb3_phy, 1); 1126 phy_power_off(dwc->usb2_generic_phy); 1127 phy_power_off(dwc->usb3_generic_phy); 1128 1129 dwc3_core_exit(dwc); 1130 dwc3_ulpi_exit(dwc); 1131 1132 pm_runtime_put_sync(&pdev->dev); 1133 pm_runtime_disable(&pdev->dev); 1134 1135 return 0; 1136 } 1137 1138 #ifdef CONFIG_PM_SLEEP 1139 static int dwc3_suspend(struct device *dev) 1140 { 1141 struct dwc3 *dwc = dev_get_drvdata(dev); 1142 unsigned long flags; 1143 1144 spin_lock_irqsave(&dwc->lock, flags); 1145 1146 switch (dwc->dr_mode) { 1147 case USB_DR_MODE_PERIPHERAL: 1148 case USB_DR_MODE_OTG: 1149 dwc3_gadget_suspend(dwc); 1150 /* FALLTHROUGH */ 1151 case USB_DR_MODE_HOST: 1152 default: 1153 dwc3_event_buffers_cleanup(dwc); 1154 break; 1155 } 1156 1157 dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL); 1158 spin_unlock_irqrestore(&dwc->lock, flags); 1159 1160 usb_phy_shutdown(dwc->usb3_phy); 1161 usb_phy_shutdown(dwc->usb2_phy); 1162 phy_exit(dwc->usb2_generic_phy); 1163 phy_exit(dwc->usb3_generic_phy); 1164 1165 pinctrl_pm_select_sleep_state(dev); 1166 1167 return 0; 1168 } 1169 1170 static int dwc3_resume(struct device *dev) 1171 { 1172 struct dwc3 *dwc = dev_get_drvdata(dev); 1173 unsigned long flags; 1174 int ret; 1175 1176 pinctrl_pm_select_default_state(dev); 1177 1178 usb_phy_init(dwc->usb3_phy); 1179 usb_phy_init(dwc->usb2_phy); 1180 ret = phy_init(dwc->usb2_generic_phy); 1181 if (ret < 0) 1182 return ret; 1183 1184 ret = phy_init(dwc->usb3_generic_phy); 1185 if (ret < 0) 1186 goto err_usb2phy_init; 1187 1188 spin_lock_irqsave(&dwc->lock, flags); 1189 1190 dwc3_event_buffers_setup(dwc); 1191 dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); 1192 1193 switch (dwc->dr_mode) { 1194 case USB_DR_MODE_PERIPHERAL: 1195 case USB_DR_MODE_OTG: 1196 dwc3_gadget_resume(dwc); 1197 /* FALLTHROUGH */ 1198 case USB_DR_MODE_HOST: 1199 default: 1200 /* do nothing */ 1201 break; 1202 } 1203 1204 spin_unlock_irqrestore(&dwc->lock, flags); 1205 1206 pm_runtime_disable(dev); 1207 pm_runtime_set_active(dev); 1208 pm_runtime_enable(dev); 1209 1210 return 0; 1211 1212 err_usb2phy_init: 1213 phy_exit(dwc->usb2_generic_phy); 1214 1215 return ret; 1216 } 1217 1218 static const struct dev_pm_ops dwc3_dev_pm_ops = { 1219 SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) 1220 }; 1221 1222 #define DWC3_PM_OPS &(dwc3_dev_pm_ops) 1223 #else 1224 #define DWC3_PM_OPS NULL 1225 #endif 1226 1227 #ifdef CONFIG_OF 1228 static const struct of_device_id of_dwc3_match[] = { 1229 { 1230 .compatible = "snps,dwc3" 1231 }, 1232 { 1233 .compatible = "synopsys,dwc3" 1234 }, 1235 { }, 1236 }; 1237 MODULE_DEVICE_TABLE(of, of_dwc3_match); 1238 #endif 1239 1240 #ifdef CONFIG_ACPI 1241 1242 #define ACPI_ID_INTEL_BSW "808622B7" 1243 1244 static const struct acpi_device_id dwc3_acpi_match[] = { 1245 { ACPI_ID_INTEL_BSW, 0 }, 1246 { }, 1247 }; 1248 MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); 1249 #endif 1250 1251 static struct platform_driver dwc3_driver = { 1252 .probe = dwc3_probe, 1253 .remove = dwc3_remove, 1254 .driver = { 1255 .name = "dwc3", 1256 .of_match_table = of_match_ptr(of_dwc3_match), 1257 .acpi_match_table = ACPI_PTR(dwc3_acpi_match), 1258 .pm = DWC3_PM_OPS, 1259 }, 1260 }; 1261 1262 module_platform_driver(dwc3_driver); 1263 1264 MODULE_ALIAS("platform:dwc3"); 1265 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 1266 MODULE_LICENSE("GPL v2"); 1267 MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); 1268