1config USB_DWC3 2 tristate "DesignWare USB3 DRD Core Support" 3 depends on (USB || USB_GADGET) && HAS_DMA 4 select USB_XHCI_PLATFORM if USB_XHCI_HCD 5 help 6 Say Y or M here if your system has a Dual Role SuperSpeed 7 USB controller based on the DesignWare USB3 IP Core. 8 9 If you choose to build this driver is a dynamically linked 10 module, the module will be called dwc3.ko. 11 12if USB_DWC3 13 14config USB_DWC3_ULPI 15 bool "Register ULPI PHY Interface" 16 depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3 17 help 18 Select this if you have ULPI type PHY attached to your DWC3 19 controller. 20 21choice 22 bool "DWC3 Mode Selection" 23 default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET) 24 default USB_DWC3_HOST if (USB && !USB_GADGET) 25 default USB_DWC3_GADGET if (!USB && USB_GADGET) 26 27config USB_DWC3_HOST 28 bool "Host only mode" 29 depends on USB=y || USB=USB_DWC3 30 help 31 Select this when you want to use DWC3 in host mode only, 32 thereby the gadget feature will be regressed. 33 34config USB_DWC3_GADGET 35 bool "Gadget only mode" 36 depends on USB_GADGET=y || USB_GADGET=USB_DWC3 37 help 38 Select this when you want to use DWC3 in gadget mode only, 39 thereby the host feature will be regressed. 40 41config USB_DWC3_DUAL_ROLE 42 bool "Dual Role mode" 43 depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) 44 depends on (EXTCON=y || EXTCON=USB_DWC3) 45 help 46 This is the default mode of working of DWC3 controller where 47 both host and gadget features are enabled. 48 49endchoice 50 51comment "Platform Glue Driver Support" 52 53config USB_DWC3_OMAP 54 tristate "Texas Instruments OMAP5 and similar Platforms" 55 depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST) 56 depends on OF 57 default USB_DWC3 58 help 59 Some platforms from Texas Instruments like OMAP5, DRA7xxx and 60 AM437x use this IP for USB2/3 functionality. 61 62 Say 'Y' or 'M' here if you have one such device 63 64config USB_DWC3_EXYNOS 65 tristate "Samsung Exynos Platform" 66 depends on (ARCH_EXYNOS || COMPILE_TEST) && OF 67 default USB_DWC3 68 help 69 Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside, 70 say 'Y' or 'M' if you have one such device. 71 72config USB_DWC3_PCI 73 tristate "PCIe-based Platforms" 74 depends on USB_PCI && ACPI 75 default USB_DWC3 76 help 77 If you're using the DesignWare Core IP with a PCIe (but not HAPS 78 platform), please say 'Y' or 'M' here. 79 80config USB_DWC3_HAPS 81 tristate "Synopsys PCIe-based HAPS Platforms" 82 depends on USB_PCI 83 default USB_DWC3 84 help 85 If you're using the DesignWare Core IP with a Synopsys PCIe HAPS 86 platform, please say 'Y' or 'M' here. 87 88config USB_DWC3_KEYSTONE 89 tristate "Texas Instruments Keystone2 Platforms" 90 depends on ARCH_KEYSTONE || COMPILE_TEST 91 default USB_DWC3 92 help 93 Support of USB2/3 functionality in TI Keystone2 platforms. 94 Say 'Y' or 'M' here if you have one such device 95 96config USB_DWC3_OF_SIMPLE 97 tristate "Generic OF Simple Glue Layer" 98 depends on OF && COMMON_CLK 99 default USB_DWC3 100 help 101 Support USB2/3 functionality in simple SoC integrations. 102 Currently supports Xilinx and Qualcomm DWC USB3 IP. 103 Say 'Y' or 'M' if you have one such device. 104 105config USB_DWC3_ST 106 tristate "STMicroelectronics Platforms" 107 depends on (ARCH_STI || COMPILE_TEST) && OF 108 default USB_DWC3 109 help 110 STMicroelectronics SoCs with one DesignWare Core USB3 IP 111 inside (i.e. STiH407). 112 Say 'Y' or 'M' if you have one such device. 113 114config USB_DWC3_QCOM 115 tristate "Qualcomm Platform" 116 depends on EXTCON && (ARCH_QCOM || COMPILE_TEST) 117 depends on OF 118 default USB_DWC3 119 help 120 Some Qualcomm SoCs use DesignWare Core IP for USB2/3 121 functionality. 122 This driver also handles Qscratch wrapper which is needed 123 for peripheral mode support. 124 Say 'Y' or 'M' if you have one such device. 125 126endif 127