1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * platform.c - DesignWare HS OTG Controller platform driver 4 * 5 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The names of the above-listed copyright holders may not be used 17 * to endorse or promote products derived from this software without 18 * specific prior written permission. 19 * 20 * ALTERNATIVELY, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") as published by the Free Software 22 * Foundation; either version 2 of the License, or (at your option) any 23 * later version. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 #include <linux/kernel.h> 39 #include <linux/module.h> 40 #include <linux/slab.h> 41 #include <linux/clk.h> 42 #include <linux/device.h> 43 #include <linux/dma-mapping.h> 44 #include <linux/of_device.h> 45 #include <linux/mutex.h> 46 #include <linux/platform_device.h> 47 #include <linux/phy/phy.h> 48 #include <linux/platform_data/s3c-hsotg.h> 49 #include <linux/reset.h> 50 51 #include <linux/usb/of.h> 52 53 #include "core.h" 54 #include "hcd.h" 55 #include "debug.h" 56 57 static const char dwc2_driver_name[] = "dwc2"; 58 59 /* 60 * Check the dr_mode against the module configuration and hardware 61 * capabilities. 62 * 63 * The hardware, module, and dr_mode, can each be set to host, device, 64 * or otg. Check that all these values are compatible and adjust the 65 * value of dr_mode if possible. 66 * 67 * actual 68 * HW MOD dr_mode dr_mode 69 * ------------------------------ 70 * HST HST any : HST 71 * HST DEV any : --- 72 * HST OTG any : HST 73 * 74 * DEV HST any : --- 75 * DEV DEV any : DEV 76 * DEV OTG any : DEV 77 * 78 * OTG HST any : HST 79 * OTG DEV any : DEV 80 * OTG OTG any : dr_mode 81 */ 82 static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) 83 { 84 enum usb_dr_mode mode; 85 86 hsotg->dr_mode = usb_get_dr_mode(hsotg->dev); 87 if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN) 88 hsotg->dr_mode = USB_DR_MODE_OTG; 89 90 mode = hsotg->dr_mode; 91 92 if (dwc2_hw_is_device(hsotg)) { 93 if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) { 94 dev_err(hsotg->dev, 95 "Controller does not support host mode.\n"); 96 return -EINVAL; 97 } 98 mode = USB_DR_MODE_PERIPHERAL; 99 } else if (dwc2_hw_is_host(hsotg)) { 100 if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) { 101 dev_err(hsotg->dev, 102 "Controller does not support device mode.\n"); 103 return -EINVAL; 104 } 105 mode = USB_DR_MODE_HOST; 106 } else { 107 if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) 108 mode = USB_DR_MODE_HOST; 109 else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) 110 mode = USB_DR_MODE_PERIPHERAL; 111 } 112 113 if (mode != hsotg->dr_mode) { 114 dev_warn(hsotg->dev, 115 "Configuration mismatch. dr_mode forced to %s\n", 116 mode == USB_DR_MODE_HOST ? "host" : "device"); 117 118 hsotg->dr_mode = mode; 119 } 120 121 return 0; 122 } 123 124 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) 125 { 126 struct platform_device *pdev = to_platform_device(hsotg->dev); 127 int ret; 128 129 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), 130 hsotg->supplies); 131 if (ret) 132 return ret; 133 134 if (hsotg->clk) { 135 ret = clk_prepare_enable(hsotg->clk); 136 if (ret) 137 return ret; 138 } 139 140 if (hsotg->uphy) { 141 ret = usb_phy_init(hsotg->uphy); 142 } else if (hsotg->plat && hsotg->plat->phy_init) { 143 ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); 144 } else { 145 ret = phy_power_on(hsotg->phy); 146 if (ret == 0) 147 ret = phy_init(hsotg->phy); 148 } 149 150 return ret; 151 } 152 153 /** 154 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources 155 * @hsotg: The driver state 156 * 157 * A wrapper for platform code responsible for controlling 158 * low-level USB platform resources (phy, clock, regulators) 159 */ 160 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) 161 { 162 int ret = __dwc2_lowlevel_hw_enable(hsotg); 163 164 if (ret == 0) 165 hsotg->ll_hw_enabled = true; 166 return ret; 167 } 168 169 static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) 170 { 171 struct platform_device *pdev = to_platform_device(hsotg->dev); 172 int ret = 0; 173 174 if (hsotg->uphy) { 175 usb_phy_shutdown(hsotg->uphy); 176 } else if (hsotg->plat && hsotg->plat->phy_exit) { 177 ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); 178 } else { 179 ret = phy_exit(hsotg->phy); 180 if (ret == 0) 181 ret = phy_power_off(hsotg->phy); 182 } 183 if (ret) 184 return ret; 185 186 if (hsotg->clk) 187 clk_disable_unprepare(hsotg->clk); 188 189 ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), 190 hsotg->supplies); 191 192 return ret; 193 } 194 195 /** 196 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources 197 * @hsotg: The driver state 198 * 199 * A wrapper for platform code responsible for controlling 200 * low-level USB platform resources (phy, clock, regulators) 201 */ 202 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) 203 { 204 int ret = __dwc2_lowlevel_hw_disable(hsotg); 205 206 if (ret == 0) 207 hsotg->ll_hw_enabled = false; 208 return ret; 209 } 210 211 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) 212 { 213 int i, ret; 214 215 hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); 216 if (IS_ERR(hsotg->reset)) { 217 ret = PTR_ERR(hsotg->reset); 218 dev_err(hsotg->dev, "error getting reset control %d\n", ret); 219 return ret; 220 } 221 222 reset_control_deassert(hsotg->reset); 223 224 hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc"); 225 if (IS_ERR(hsotg->reset_ecc)) { 226 ret = PTR_ERR(hsotg->reset_ecc); 227 dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret); 228 return ret; 229 } 230 231 reset_control_deassert(hsotg->reset_ecc); 232 233 /* Set default UTMI width */ 234 hsotg->phyif = GUSBCFG_PHYIF16; 235 236 /* 237 * Attempt to find a generic PHY, then look for an old style 238 * USB PHY and then fall back to pdata 239 */ 240 hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy"); 241 if (IS_ERR(hsotg->phy)) { 242 ret = PTR_ERR(hsotg->phy); 243 switch (ret) { 244 case -ENODEV: 245 case -ENOSYS: 246 hsotg->phy = NULL; 247 break; 248 case -EPROBE_DEFER: 249 return ret; 250 default: 251 dev_err(hsotg->dev, "error getting phy %d\n", ret); 252 return ret; 253 } 254 } 255 256 if (!hsotg->phy) { 257 hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); 258 if (IS_ERR(hsotg->uphy)) { 259 ret = PTR_ERR(hsotg->uphy); 260 switch (ret) { 261 case -ENODEV: 262 case -ENXIO: 263 hsotg->uphy = NULL; 264 break; 265 case -EPROBE_DEFER: 266 return ret; 267 default: 268 dev_err(hsotg->dev, "error getting usb phy %d\n", 269 ret); 270 return ret; 271 } 272 } 273 } 274 275 hsotg->plat = dev_get_platdata(hsotg->dev); 276 277 if (hsotg->phy) { 278 /* 279 * If using the generic PHY framework, check if the PHY bus 280 * width is 8-bit and set the phyif appropriately. 281 */ 282 if (phy_get_bus_width(hsotg->phy) == 8) 283 hsotg->phyif = GUSBCFG_PHYIF8; 284 } 285 286 /* Clock */ 287 hsotg->clk = devm_clk_get(hsotg->dev, "otg"); 288 if (IS_ERR(hsotg->clk)) { 289 hsotg->clk = NULL; 290 dev_dbg(hsotg->dev, "cannot get otg clock\n"); 291 } 292 293 /* Regulators */ 294 for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) 295 hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i]; 296 297 ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies), 298 hsotg->supplies); 299 if (ret) { 300 dev_err(hsotg->dev, "failed to request supplies: %d\n", ret); 301 return ret; 302 } 303 return 0; 304 } 305 306 /** 307 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the 308 * DWC_otg driver 309 * 310 * @dev: Platform device 311 * 312 * This routine is called, for example, when the rmmod command is executed. The 313 * device may or may not be electrically present. If it is present, the driver 314 * stops device processing. Any resources used on behalf of this device are 315 * freed. 316 */ 317 static int dwc2_driver_remove(struct platform_device *dev) 318 { 319 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); 320 321 dwc2_debugfs_exit(hsotg); 322 if (hsotg->hcd_enabled) 323 dwc2_hcd_remove(hsotg); 324 if (hsotg->gadget_enabled) 325 dwc2_hsotg_remove(hsotg); 326 327 if (hsotg->ll_hw_enabled) 328 dwc2_lowlevel_hw_disable(hsotg); 329 330 reset_control_assert(hsotg->reset); 331 reset_control_assert(hsotg->reset_ecc); 332 333 return 0; 334 } 335 336 /** 337 * dwc2_driver_shutdown() - Called on device shutdown 338 * 339 * @dev: Platform device 340 * 341 * In specific conditions (involving usb hubs) dwc2 devices can create a 342 * lot of interrupts, even to the point of overwhelming devices running 343 * at low frequencies. Some devices need to do special clock handling 344 * at shutdown-time which may bring the system clock below the threshold 345 * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs 346 * prevents reboots/poweroffs from getting stuck in such cases. 347 */ 348 static void dwc2_driver_shutdown(struct platform_device *dev) 349 { 350 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); 351 352 disable_irq(hsotg->irq); 353 } 354 355 /** 356 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg 357 * driver 358 * 359 * @dev: Platform device 360 * 361 * This routine creates the driver components required to control the device 362 * (core, HCD, and PCD) and initializes the device. The driver components are 363 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved 364 * in the device private data. This allows the driver to access the dwc2_hsotg 365 * structure on subsequent calls to driver methods for this device. 366 */ 367 static int dwc2_driver_probe(struct platform_device *dev) 368 { 369 struct dwc2_hsotg *hsotg; 370 struct resource *res; 371 int retval; 372 373 hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); 374 if (!hsotg) 375 return -ENOMEM; 376 377 hsotg->dev = &dev->dev; 378 379 /* 380 * Use reasonable defaults so platforms don't have to provide these. 381 */ 382 if (!dev->dev.dma_mask) 383 dev->dev.dma_mask = &dev->dev.coherent_dma_mask; 384 retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); 385 if (retval) { 386 dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval); 387 return retval; 388 } 389 390 res = platform_get_resource(dev, IORESOURCE_MEM, 0); 391 hsotg->regs = devm_ioremap_resource(&dev->dev, res); 392 if (IS_ERR(hsotg->regs)) 393 return PTR_ERR(hsotg->regs); 394 395 dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", 396 (unsigned long)res->start, hsotg->regs); 397 398 retval = dwc2_lowlevel_hw_init(hsotg); 399 if (retval) 400 return retval; 401 402 spin_lock_init(&hsotg->lock); 403 404 hsotg->irq = platform_get_irq(dev, 0); 405 if (hsotg->irq < 0) { 406 dev_err(&dev->dev, "missing IRQ resource\n"); 407 return hsotg->irq; 408 } 409 410 dev_dbg(hsotg->dev, "registering common handler for irq%d\n", 411 hsotg->irq); 412 retval = devm_request_irq(hsotg->dev, hsotg->irq, 413 dwc2_handle_common_intr, IRQF_SHARED, 414 dev_name(hsotg->dev), hsotg); 415 if (retval) 416 return retval; 417 418 retval = dwc2_lowlevel_hw_enable(hsotg); 419 if (retval) 420 return retval; 421 422 retval = dwc2_get_dr_mode(hsotg); 423 if (retval) 424 goto error; 425 426 /* 427 * Reset before dwc2_get_hwparams() then it could get power-on real 428 * reset value form registers. 429 */ 430 retval = dwc2_core_reset(hsotg, false); 431 if (retval) 432 goto error; 433 434 /* Detect config values from hardware */ 435 retval = dwc2_get_hwparams(hsotg); 436 if (retval) 437 goto error; 438 439 /* 440 * For OTG cores, set the force mode bits to reflect the value 441 * of dr_mode. Force mode bits should not be touched at any 442 * other time after this. 443 */ 444 dwc2_force_dr_mode(hsotg); 445 446 retval = dwc2_init_params(hsotg); 447 if (retval) 448 goto error; 449 450 if (hsotg->dr_mode != USB_DR_MODE_HOST) { 451 retval = dwc2_gadget_init(hsotg); 452 if (retval) 453 goto error; 454 hsotg->gadget_enabled = 1; 455 } 456 457 if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { 458 retval = dwc2_hcd_init(hsotg); 459 if (retval) { 460 if (hsotg->gadget_enabled) 461 dwc2_hsotg_remove(hsotg); 462 goto error; 463 } 464 hsotg->hcd_enabled = 1; 465 } 466 467 platform_set_drvdata(dev, hsotg); 468 hsotg->hibernated = 0; 469 470 dwc2_debugfs_init(hsotg); 471 472 /* Gadget code manages lowlevel hw on its own */ 473 if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) 474 dwc2_lowlevel_hw_disable(hsotg); 475 476 return 0; 477 478 error: 479 dwc2_lowlevel_hw_disable(hsotg); 480 return retval; 481 } 482 483 static int __maybe_unused dwc2_suspend(struct device *dev) 484 { 485 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); 486 int ret = 0; 487 488 if (dwc2_is_device_mode(dwc2)) 489 dwc2_hsotg_suspend(dwc2); 490 491 if (dwc2->ll_hw_enabled) 492 ret = __dwc2_lowlevel_hw_disable(dwc2); 493 494 return ret; 495 } 496 497 static int __maybe_unused dwc2_resume(struct device *dev) 498 { 499 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); 500 int ret = 0; 501 502 if (dwc2->ll_hw_enabled) { 503 ret = __dwc2_lowlevel_hw_enable(dwc2); 504 if (ret) 505 return ret; 506 } 507 508 if (dwc2_is_device_mode(dwc2)) 509 ret = dwc2_hsotg_resume(dwc2); 510 511 return ret; 512 } 513 514 static const struct dev_pm_ops dwc2_dev_pm_ops = { 515 SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) 516 }; 517 518 static struct platform_driver dwc2_platform_driver = { 519 .driver = { 520 .name = dwc2_driver_name, 521 .of_match_table = dwc2_of_match_table, 522 .pm = &dwc2_dev_pm_ops, 523 }, 524 .probe = dwc2_driver_probe, 525 .remove = dwc2_driver_remove, 526 .shutdown = dwc2_driver_shutdown, 527 }; 528 529 module_platform_driver(dwc2_platform_driver); 530 531 MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue"); 532 MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>"); 533 MODULE_LICENSE("Dual BSD/GPL"); 534