1 /* 2 * platform.c - DesignWare HS OTG Controller platform driver 3 * 4 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions, and the following disclaimer, 11 * without modification. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The names of the above-listed copyright holders may not be used 16 * to endorse or promote products derived from this software without 17 * specific prior written permission. 18 * 19 * ALTERNATIVELY, this software may be distributed under the terms of the 20 * GNU General Public License ("GPL") as published by the Free Software 21 * Foundation; either version 2 of the License, or (at your option) any 22 * later version. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 25 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 26 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 27 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 28 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 29 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 30 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 31 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 32 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 33 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37 #include <linux/kernel.h> 38 #include <linux/module.h> 39 #include <linux/slab.h> 40 #include <linux/device.h> 41 #include <linux/dma-mapping.h> 42 #include <linux/of_device.h> 43 #include <linux/mutex.h> 44 #include <linux/platform_device.h> 45 46 #include <linux/usb/of.h> 47 48 #include "core.h" 49 #include "hcd.h" 50 51 static const char dwc2_driver_name[] = "dwc2"; 52 53 static const struct dwc2_core_params params_bcm2835 = { 54 .otg_cap = 0, /* HNP/SRP capable */ 55 .otg_ver = 0, /* 1.3 */ 56 .dma_enable = 1, 57 .dma_desc_enable = 0, 58 .speed = 0, /* High Speed */ 59 .enable_dynamic_fifo = 1, 60 .en_multiple_tx_fifo = 1, 61 .host_rx_fifo_size = 774, /* 774 DWORDs */ 62 .host_nperio_tx_fifo_size = 256, /* 256 DWORDs */ 63 .host_perio_tx_fifo_size = 512, /* 512 DWORDs */ 64 .max_transfer_size = 65535, 65 .max_packet_count = 511, 66 .host_channels = 8, 67 .phy_type = 1, /* UTMI */ 68 .phy_utmi_width = 8, /* 8 bits */ 69 .phy_ulpi_ddr = 0, /* Single */ 70 .phy_ulpi_ext_vbus = 0, 71 .i2c_enable = 0, 72 .ulpi_fs_ls = 0, 73 .host_support_fs_ls_low_power = 0, 74 .host_ls_low_power_phy_clk = 0, /* 48 MHz */ 75 .ts_dline = 0, 76 .reload_ctl = 0, 77 .ahbcfg = 0x10, 78 .uframe_sched = 0, 79 }; 80 81 static const struct dwc2_core_params params_rk3066 = { 82 .otg_cap = 2, /* non-HNP/non-SRP */ 83 .otg_ver = -1, 84 .dma_enable = -1, 85 .dma_desc_enable = 0, 86 .speed = -1, 87 .enable_dynamic_fifo = 1, 88 .en_multiple_tx_fifo = -1, 89 .host_rx_fifo_size = 520, /* 520 DWORDs */ 90 .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ 91 .host_perio_tx_fifo_size = 256, /* 256 DWORDs */ 92 .max_transfer_size = 65535, 93 .max_packet_count = -1, 94 .host_channels = -1, 95 .phy_type = -1, 96 .phy_utmi_width = -1, 97 .phy_ulpi_ddr = -1, 98 .phy_ulpi_ext_vbus = -1, 99 .i2c_enable = -1, 100 .ulpi_fs_ls = -1, 101 .host_support_fs_ls_low_power = -1, 102 .host_ls_low_power_phy_clk = -1, 103 .ts_dline = -1, 104 .reload_ctl = -1, 105 .ahbcfg = 0x7, /* INCR16 */ 106 .uframe_sched = -1, 107 }; 108 109 /** 110 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the 111 * DWC_otg driver 112 * 113 * @dev: Platform device 114 * 115 * This routine is called, for example, when the rmmod command is executed. The 116 * device may or may not be electrically present. If it is present, the driver 117 * stops device processing. Any resources used on behalf of this device are 118 * freed. 119 */ 120 static int dwc2_driver_remove(struct platform_device *dev) 121 { 122 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); 123 124 dwc2_hcd_remove(hsotg); 125 s3c_hsotg_remove(hsotg); 126 127 return 0; 128 } 129 130 static const struct of_device_id dwc2_of_match_table[] = { 131 { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, 132 { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, 133 { .compatible = "snps,dwc2", .data = NULL }, 134 { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, 135 {}, 136 }; 137 MODULE_DEVICE_TABLE(of, dwc2_of_match_table); 138 139 /** 140 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg 141 * driver 142 * 143 * @dev: Platform device 144 * 145 * This routine creates the driver components required to control the device 146 * (core, HCD, and PCD) and initializes the device. The driver components are 147 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved 148 * in the device private data. This allows the driver to access the dwc2_hsotg 149 * structure on subsequent calls to driver methods for this device. 150 */ 151 static int dwc2_driver_probe(struct platform_device *dev) 152 { 153 const struct of_device_id *match; 154 const struct dwc2_core_params *params; 155 struct dwc2_core_params defparams; 156 struct dwc2_hsotg *hsotg; 157 struct resource *res; 158 struct phy *phy; 159 struct usb_phy *uphy; 160 int retval; 161 int irq; 162 163 match = of_match_device(dwc2_of_match_table, &dev->dev); 164 if (match && match->data) { 165 params = match->data; 166 } else { 167 /* Default all params to autodetect */ 168 dwc2_set_all_params(&defparams, -1); 169 params = &defparams; 170 171 /* 172 * Disable descriptor dma mode by default as the HW can support 173 * it, but does not support it for SPLIT transactions. 174 */ 175 defparams.dma_desc_enable = 0; 176 } 177 178 hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); 179 if (!hsotg) 180 return -ENOMEM; 181 182 hsotg->dev = &dev->dev; 183 184 /* 185 * Use reasonable defaults so platforms don't have to provide these. 186 */ 187 if (!dev->dev.dma_mask) 188 dev->dev.dma_mask = &dev->dev.coherent_dma_mask; 189 retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); 190 if (retval) 191 return retval; 192 193 irq = platform_get_irq(dev, 0); 194 if (irq < 0) { 195 dev_err(&dev->dev, "missing IRQ resource\n"); 196 return irq; 197 } 198 199 dev_dbg(hsotg->dev, "registering common handler for irq%d\n", 200 irq); 201 retval = devm_request_irq(hsotg->dev, irq, 202 dwc2_handle_common_intr, IRQF_SHARED, 203 dev_name(hsotg->dev), hsotg); 204 if (retval) 205 return retval; 206 207 res = platform_get_resource(dev, IORESOURCE_MEM, 0); 208 hsotg->regs = devm_ioremap_resource(&dev->dev, res); 209 if (IS_ERR(hsotg->regs)) 210 return PTR_ERR(hsotg->regs); 211 212 dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", 213 (unsigned long)res->start, hsotg->regs); 214 215 hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node); 216 217 /* 218 * Attempt to find a generic PHY, then look for an old style 219 * USB PHY 220 */ 221 phy = devm_phy_get(&dev->dev, "usb2-phy"); 222 if (IS_ERR(phy)) { 223 hsotg->phy = NULL; 224 uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2); 225 if (IS_ERR(uphy)) 226 hsotg->uphy = NULL; 227 else 228 hsotg->uphy = uphy; 229 } else { 230 hsotg->phy = phy; 231 phy_power_on(hsotg->phy); 232 phy_init(hsotg->phy); 233 } 234 235 spin_lock_init(&hsotg->lock); 236 mutex_init(&hsotg->init_mutex); 237 retval = dwc2_gadget_init(hsotg, irq); 238 if (retval) 239 return retval; 240 retval = dwc2_hcd_init(hsotg, irq, params); 241 if (retval) 242 return retval; 243 244 platform_set_drvdata(dev, hsotg); 245 246 return retval; 247 } 248 249 static int __maybe_unused dwc2_suspend(struct device *dev) 250 { 251 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); 252 int ret = 0; 253 254 if (dwc2_is_device_mode(dwc2)) { 255 ret = s3c_hsotg_suspend(dwc2); 256 } else { 257 if (dwc2->lx_state == DWC2_L0) 258 return 0; 259 phy_exit(dwc2->phy); 260 phy_power_off(dwc2->phy); 261 262 } 263 return ret; 264 } 265 266 static int __maybe_unused dwc2_resume(struct device *dev) 267 { 268 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); 269 int ret = 0; 270 271 if (dwc2_is_device_mode(dwc2)) { 272 ret = s3c_hsotg_resume(dwc2); 273 } else { 274 phy_power_on(dwc2->phy); 275 phy_init(dwc2->phy); 276 277 } 278 return ret; 279 } 280 281 static const struct dev_pm_ops dwc2_dev_pm_ops = { 282 SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) 283 }; 284 285 static struct platform_driver dwc2_platform_driver = { 286 .driver = { 287 .name = dwc2_driver_name, 288 .of_match_table = dwc2_of_match_table, 289 .pm = &dwc2_dev_pm_ops, 290 }, 291 .probe = dwc2_driver_probe, 292 .remove = dwc2_driver_remove, 293 }; 294 295 module_platform_driver(dwc2_platform_driver); 296 297 MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue"); 298 MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>"); 299 MODULE_LICENSE("Dual BSD/GPL"); 300