1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2 /* 3 * hcd.c - DesignWare HS OTG Controller host-mode routines 4 * 5 * Copyright (C) 2004-2013 Synopsys, Inc. 6 */ 7 8 /* 9 * This file contains the core HCD code, and implements the Linux hc_driver 10 * API 11 */ 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/spinlock.h> 15 #include <linux/interrupt.h> 16 #include <linux/platform_device.h> 17 #include <linux/dma-mapping.h> 18 #include <linux/delay.h> 19 #include <linux/io.h> 20 #include <linux/slab.h> 21 #include <linux/usb.h> 22 23 #include <linux/usb/hcd.h> 24 #include <linux/usb/ch11.h> 25 #include <linux/usb/of.h> 26 27 #include "core.h" 28 #include "hcd.h" 29 30 /* 31 * ========================================================================= 32 * Host Core Layer Functions 33 * ========================================================================= 34 */ 35 36 /** 37 * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, 38 * used in both device and host modes 39 * 40 * @hsotg: Programming view of the DWC_otg controller 41 */ 42 static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) 43 { 44 u32 intmsk; 45 46 /* Clear any pending OTG Interrupts */ 47 dwc2_writel(hsotg, 0xffffffff, GOTGINT); 48 49 /* Clear any pending interrupts */ 50 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 51 52 /* Enable the interrupts in the GINTMSK */ 53 intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; 54 55 if (!hsotg->params.host_dma) 56 intmsk |= GINTSTS_RXFLVL; 57 if (!hsotg->params.external_id_pin_ctl) 58 intmsk |= GINTSTS_CONIDSTSCHNG; 59 60 intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP | 61 GINTSTS_SESSREQINT; 62 63 if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm) 64 intmsk |= GINTSTS_LPMTRANRCVD; 65 66 dwc2_writel(hsotg, intmsk, GINTMSK); 67 } 68 69 static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) 70 { 71 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 72 73 switch (hsotg->hw_params.arch) { 74 case GHWCFG2_EXT_DMA_ARCH: 75 dev_err(hsotg->dev, "External DMA Mode not supported\n"); 76 return -EINVAL; 77 78 case GHWCFG2_INT_DMA_ARCH: 79 dev_dbg(hsotg->dev, "Internal DMA Mode\n"); 80 if (hsotg->params.ahbcfg != -1) { 81 ahbcfg &= GAHBCFG_CTRL_MASK; 82 ahbcfg |= hsotg->params.ahbcfg & 83 ~GAHBCFG_CTRL_MASK; 84 } 85 break; 86 87 case GHWCFG2_SLAVE_ONLY_ARCH: 88 default: 89 dev_dbg(hsotg->dev, "Slave Only Mode\n"); 90 break; 91 } 92 93 if (hsotg->params.host_dma) 94 ahbcfg |= GAHBCFG_DMA_EN; 95 else 96 hsotg->params.dma_desc_enable = false; 97 98 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 99 100 return 0; 101 } 102 103 static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) 104 { 105 u32 usbcfg; 106 107 usbcfg = dwc2_readl(hsotg, GUSBCFG); 108 usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); 109 110 switch (hsotg->hw_params.op_mode) { 111 case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: 112 if (hsotg->params.otg_caps.hnp_support && 113 hsotg->params.otg_caps.srp_support) 114 usbcfg |= GUSBCFG_HNPCAP; 115 fallthrough; 116 117 case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: 118 case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: 119 case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: 120 if (hsotg->params.otg_caps.srp_support) 121 usbcfg |= GUSBCFG_SRPCAP; 122 break; 123 124 case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: 125 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: 126 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: 127 default: 128 break; 129 } 130 131 dwc2_writel(hsotg, usbcfg, GUSBCFG); 132 } 133 134 static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg) 135 { 136 if (hsotg->vbus_supply) 137 return regulator_enable(hsotg->vbus_supply); 138 139 return 0; 140 } 141 142 static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg) 143 { 144 if (hsotg->vbus_supply) 145 return regulator_disable(hsotg->vbus_supply); 146 147 return 0; 148 } 149 150 /** 151 * dwc2_enable_host_interrupts() - Enables the Host mode interrupts 152 * 153 * @hsotg: Programming view of DWC_otg controller 154 */ 155 static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) 156 { 157 u32 intmsk; 158 159 dev_dbg(hsotg->dev, "%s()\n", __func__); 160 161 /* Disable all interrupts */ 162 dwc2_writel(hsotg, 0, GINTMSK); 163 dwc2_writel(hsotg, 0, HAINTMSK); 164 165 /* Enable the common interrupts */ 166 dwc2_enable_common_interrupts(hsotg); 167 168 /* Enable host mode interrupts without disturbing common interrupts */ 169 intmsk = dwc2_readl(hsotg, GINTMSK); 170 intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; 171 dwc2_writel(hsotg, intmsk, GINTMSK); 172 } 173 174 /** 175 * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts 176 * 177 * @hsotg: Programming view of DWC_otg controller 178 */ 179 static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) 180 { 181 u32 intmsk = dwc2_readl(hsotg, GINTMSK); 182 183 /* Disable host mode interrupts without disturbing common interrupts */ 184 intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | 185 GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT); 186 dwc2_writel(hsotg, intmsk, GINTMSK); 187 } 188 189 /* 190 * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size 191 * For system that have a total fifo depth that is smaller than the default 192 * RX + TX fifo size. 193 * 194 * @hsotg: Programming view of DWC_otg controller 195 */ 196 static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) 197 { 198 struct dwc2_core_params *params = &hsotg->params; 199 struct dwc2_hw_params *hw = &hsotg->hw_params; 200 u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; 201 202 total_fifo_size = hw->total_fifo_size; 203 rxfsiz = params->host_rx_fifo_size; 204 nptxfsiz = params->host_nperio_tx_fifo_size; 205 ptxfsiz = params->host_perio_tx_fifo_size; 206 207 /* 208 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth 209 * allocation with support for high bandwidth endpoints. Synopsys 210 * defines MPS(Max Packet size) for a periodic EP=1024, and for 211 * non-periodic as 512. 212 */ 213 if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { 214 /* 215 * For Buffer DMA mode/Scatter Gather DMA mode 216 * 2 * ((Largest Packet size / 4) + 1 + 1) + n 217 * with n = number of host channel. 218 * 2 * ((1024/4) + 2) = 516 219 */ 220 rxfsiz = 516 + hw->host_channels; 221 222 /* 223 * min non-periodic tx fifo depth 224 * 2 * (largest non-periodic USB packet used / 4) 225 * 2 * (512/4) = 256 226 */ 227 nptxfsiz = 256; 228 229 /* 230 * min periodic tx fifo depth 231 * (largest packet size*MC)/4 232 * (1024 * 3)/4 = 768 233 */ 234 ptxfsiz = 768; 235 236 params->host_rx_fifo_size = rxfsiz; 237 params->host_nperio_tx_fifo_size = nptxfsiz; 238 params->host_perio_tx_fifo_size = ptxfsiz; 239 } 240 241 /* 242 * If the summation of RX, NPTX and PTX fifo sizes is still 243 * bigger than the total_fifo_size, then we have a problem. 244 * 245 * We won't be able to allocate as many endpoints. Right now, 246 * we're just printing an error message, but ideally this FIFO 247 * allocation algorithm would be improved in the future. 248 * 249 * FIXME improve this FIFO allocation algorithm. 250 */ 251 if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) 252 dev_err(hsotg->dev, "invalid fifo sizes\n"); 253 } 254 255 static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) 256 { 257 struct dwc2_core_params *params = &hsotg->params; 258 u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz; 259 260 if (!params->enable_dynamic_fifo) 261 return; 262 263 dwc2_calculate_dynamic_fifo(hsotg); 264 265 /* Rx FIFO */ 266 grxfsiz = dwc2_readl(hsotg, GRXFSIZ); 267 dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); 268 grxfsiz &= ~GRXFSIZ_DEPTH_MASK; 269 grxfsiz |= params->host_rx_fifo_size << 270 GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; 271 dwc2_writel(hsotg, grxfsiz, GRXFSIZ); 272 dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", 273 dwc2_readl(hsotg, GRXFSIZ)); 274 275 /* Non-periodic Tx FIFO */ 276 dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", 277 dwc2_readl(hsotg, GNPTXFSIZ)); 278 nptxfsiz = params->host_nperio_tx_fifo_size << 279 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 280 nptxfsiz |= params->host_rx_fifo_size << 281 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 282 dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ); 283 dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", 284 dwc2_readl(hsotg, GNPTXFSIZ)); 285 286 /* Periodic Tx FIFO */ 287 dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", 288 dwc2_readl(hsotg, HPTXFSIZ)); 289 hptxfsiz = params->host_perio_tx_fifo_size << 290 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; 291 hptxfsiz |= (params->host_rx_fifo_size + 292 params->host_nperio_tx_fifo_size) << 293 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; 294 dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ); 295 dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", 296 dwc2_readl(hsotg, HPTXFSIZ)); 297 298 if (hsotg->params.en_multiple_tx_fifo && 299 hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) { 300 /* 301 * This feature was implemented in 2.91a version 302 * Global DFIFOCFG calculation for Host mode - 303 * include RxFIFO, NPTXFIFO and HPTXFIFO 304 */ 305 dfifocfg = dwc2_readl(hsotg, GDFIFOCFG); 306 dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; 307 dfifocfg |= (params->host_rx_fifo_size + 308 params->host_nperio_tx_fifo_size + 309 params->host_perio_tx_fifo_size) << 310 GDFIFOCFG_EPINFOBASE_SHIFT & 311 GDFIFOCFG_EPINFOBASE_MASK; 312 dwc2_writel(hsotg, dfifocfg, GDFIFOCFG); 313 } 314 } 315 316 /** 317 * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for 318 * the HFIR register according to PHY type and speed 319 * 320 * @hsotg: Programming view of DWC_otg controller 321 * 322 * NOTE: The caller can modify the value of the HFIR register only after the 323 * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) 324 * has been set 325 */ 326 u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) 327 { 328 u32 usbcfg; 329 u32 hprt0; 330 int clock = 60; /* default value */ 331 332 usbcfg = dwc2_readl(hsotg, GUSBCFG); 333 hprt0 = dwc2_readl(hsotg, HPRT0); 334 335 if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && 336 !(usbcfg & GUSBCFG_PHYIF16)) 337 clock = 60; 338 if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type == 339 GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) 340 clock = 48; 341 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 342 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 343 clock = 30; 344 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 345 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) 346 clock = 60; 347 if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && 348 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) 349 clock = 48; 350 if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && 351 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) 352 clock = 48; 353 if ((usbcfg & GUSBCFG_PHYSEL) && 354 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) 355 clock = 48; 356 357 if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED) 358 /* High speed case */ 359 return 125 * clock - 1; 360 361 /* FS/LS case */ 362 return 1000 * clock - 1; 363 } 364 365 /** 366 * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination 367 * buffer 368 * 369 * @hsotg: Programming view of DWC_otg controller 370 * @dest: Destination buffer for the packet 371 * @bytes: Number of bytes to copy to the destination 372 */ 373 void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) 374 { 375 u32 *data_buf = (u32 *)dest; 376 int word_count = (bytes + 3) / 4; 377 int i; 378 379 /* 380 * Todo: Account for the case where dest is not dword aligned. This 381 * requires reading data from the FIFO into a u32 temp buffer, then 382 * moving it into the data buffer. 383 */ 384 385 dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); 386 387 for (i = 0; i < word_count; i++, data_buf++) 388 *data_buf = dwc2_readl(hsotg, HCFIFO(0)); 389 } 390 391 /** 392 * dwc2_dump_channel_info() - Prints the state of a host channel 393 * 394 * @hsotg: Programming view of DWC_otg controller 395 * @chan: Pointer to the channel to dump 396 * 397 * Must be called with interrupt disabled and spinlock held 398 * 399 * NOTE: This function will be removed once the peripheral controller code 400 * is integrated and the driver is stable 401 */ 402 static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, 403 struct dwc2_host_chan *chan) 404 { 405 #ifdef VERBOSE_DEBUG 406 int num_channels = hsotg->params.host_channels; 407 struct dwc2_qh *qh; 408 u32 hcchar; 409 u32 hcsplt; 410 u32 hctsiz; 411 u32 hc_dma; 412 int i; 413 414 if (!chan) 415 return; 416 417 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 418 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 419 hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num)); 420 hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num)); 421 422 dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); 423 dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", 424 hcchar, hcsplt); 425 dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", 426 hctsiz, hc_dma); 427 dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 428 chan->dev_addr, chan->ep_num, chan->ep_is_in); 429 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 430 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 431 dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); 432 dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); 433 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 434 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 435 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 436 (unsigned long)chan->xfer_dma); 437 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 438 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 439 dev_dbg(hsotg->dev, " NP inactive sched:\n"); 440 list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, 441 qh_list_entry) 442 dev_dbg(hsotg->dev, " %p\n", qh); 443 dev_dbg(hsotg->dev, " NP waiting sched:\n"); 444 list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting, 445 qh_list_entry) 446 dev_dbg(hsotg->dev, " %p\n", qh); 447 dev_dbg(hsotg->dev, " NP active sched:\n"); 448 list_for_each_entry(qh, &hsotg->non_periodic_sched_active, 449 qh_list_entry) 450 dev_dbg(hsotg->dev, " %p\n", qh); 451 dev_dbg(hsotg->dev, " Channels:\n"); 452 for (i = 0; i < num_channels; i++) { 453 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 454 455 dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); 456 } 457 #endif /* VERBOSE_DEBUG */ 458 } 459 460 static int _dwc2_hcd_start(struct usb_hcd *hcd); 461 462 static void dwc2_host_start(struct dwc2_hsotg *hsotg) 463 { 464 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 465 466 hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); 467 _dwc2_hcd_start(hcd); 468 } 469 470 static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) 471 { 472 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 473 474 hcd->self.is_b_host = 0; 475 } 476 477 static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, 478 int *hub_addr, int *hub_port) 479 { 480 struct urb *urb = context; 481 482 if (urb->dev->tt) 483 *hub_addr = urb->dev->tt->hub->devnum; 484 else 485 *hub_addr = 0; 486 *hub_port = urb->dev->ttport; 487 } 488 489 /* 490 * ========================================================================= 491 * Low Level Host Channel Access Functions 492 * ========================================================================= 493 */ 494 495 static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, 496 struct dwc2_host_chan *chan) 497 { 498 u32 hcintmsk = HCINTMSK_CHHLTD; 499 500 switch (chan->ep_type) { 501 case USB_ENDPOINT_XFER_CONTROL: 502 case USB_ENDPOINT_XFER_BULK: 503 dev_vdbg(hsotg->dev, "control/bulk\n"); 504 hcintmsk |= HCINTMSK_XFERCOMPL; 505 hcintmsk |= HCINTMSK_STALL; 506 hcintmsk |= HCINTMSK_XACTERR; 507 hcintmsk |= HCINTMSK_DATATGLERR; 508 if (chan->ep_is_in) { 509 hcintmsk |= HCINTMSK_BBLERR; 510 } else { 511 hcintmsk |= HCINTMSK_NAK; 512 hcintmsk |= HCINTMSK_NYET; 513 if (chan->do_ping) 514 hcintmsk |= HCINTMSK_ACK; 515 } 516 517 if (chan->do_split) { 518 hcintmsk |= HCINTMSK_NAK; 519 if (chan->complete_split) 520 hcintmsk |= HCINTMSK_NYET; 521 else 522 hcintmsk |= HCINTMSK_ACK; 523 } 524 525 if (chan->error_state) 526 hcintmsk |= HCINTMSK_ACK; 527 break; 528 529 case USB_ENDPOINT_XFER_INT: 530 if (dbg_perio()) 531 dev_vdbg(hsotg->dev, "intr\n"); 532 hcintmsk |= HCINTMSK_XFERCOMPL; 533 hcintmsk |= HCINTMSK_NAK; 534 hcintmsk |= HCINTMSK_STALL; 535 hcintmsk |= HCINTMSK_XACTERR; 536 hcintmsk |= HCINTMSK_DATATGLERR; 537 hcintmsk |= HCINTMSK_FRMOVRUN; 538 539 if (chan->ep_is_in) 540 hcintmsk |= HCINTMSK_BBLERR; 541 if (chan->error_state) 542 hcintmsk |= HCINTMSK_ACK; 543 if (chan->do_split) { 544 if (chan->complete_split) 545 hcintmsk |= HCINTMSK_NYET; 546 else 547 hcintmsk |= HCINTMSK_ACK; 548 } 549 break; 550 551 case USB_ENDPOINT_XFER_ISOC: 552 if (dbg_perio()) 553 dev_vdbg(hsotg->dev, "isoc\n"); 554 hcintmsk |= HCINTMSK_XFERCOMPL; 555 hcintmsk |= HCINTMSK_FRMOVRUN; 556 hcintmsk |= HCINTMSK_ACK; 557 558 if (chan->ep_is_in) { 559 hcintmsk |= HCINTMSK_XACTERR; 560 hcintmsk |= HCINTMSK_BBLERR; 561 } 562 break; 563 default: 564 dev_err(hsotg->dev, "## Unknown EP type ##\n"); 565 break; 566 } 567 568 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 569 if (dbg_hc(chan)) 570 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 571 } 572 573 static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, 574 struct dwc2_host_chan *chan) 575 { 576 u32 hcintmsk = HCINTMSK_CHHLTD; 577 578 /* 579 * For Descriptor DMA mode core halts the channel on AHB error. 580 * Interrupt is not required. 581 */ 582 if (!hsotg->params.dma_desc_enable) { 583 if (dbg_hc(chan)) 584 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 585 hcintmsk |= HCINTMSK_AHBERR; 586 } else { 587 if (dbg_hc(chan)) 588 dev_vdbg(hsotg->dev, "desc DMA enabled\n"); 589 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 590 hcintmsk |= HCINTMSK_XFERCOMPL; 591 } 592 593 if (chan->error_state && !chan->do_split && 594 chan->ep_type != USB_ENDPOINT_XFER_ISOC) { 595 if (dbg_hc(chan)) 596 dev_vdbg(hsotg->dev, "setting ACK\n"); 597 hcintmsk |= HCINTMSK_ACK; 598 if (chan->ep_is_in) { 599 hcintmsk |= HCINTMSK_DATATGLERR; 600 if (chan->ep_type != USB_ENDPOINT_XFER_INT) 601 hcintmsk |= HCINTMSK_NAK; 602 } 603 } 604 605 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 606 if (dbg_hc(chan)) 607 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); 608 } 609 610 static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, 611 struct dwc2_host_chan *chan) 612 { 613 u32 intmsk; 614 615 if (hsotg->params.host_dma) { 616 if (dbg_hc(chan)) 617 dev_vdbg(hsotg->dev, "DMA enabled\n"); 618 dwc2_hc_enable_dma_ints(hsotg, chan); 619 } else { 620 if (dbg_hc(chan)) 621 dev_vdbg(hsotg->dev, "DMA disabled\n"); 622 dwc2_hc_enable_slave_ints(hsotg, chan); 623 } 624 625 /* Enable the top level host channel interrupt */ 626 intmsk = dwc2_readl(hsotg, HAINTMSK); 627 intmsk |= 1 << chan->hc_num; 628 dwc2_writel(hsotg, intmsk, HAINTMSK); 629 if (dbg_hc(chan)) 630 dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); 631 632 /* Make sure host channel interrupts are enabled */ 633 intmsk = dwc2_readl(hsotg, GINTMSK); 634 intmsk |= GINTSTS_HCHINT; 635 dwc2_writel(hsotg, intmsk, GINTMSK); 636 if (dbg_hc(chan)) 637 dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); 638 } 639 640 /** 641 * dwc2_hc_init() - Prepares a host channel for transferring packets to/from 642 * a specific endpoint 643 * 644 * @hsotg: Programming view of DWC_otg controller 645 * @chan: Information needed to initialize the host channel 646 * 647 * The HCCHARn register is set up with the characteristics specified in chan. 648 * Host channel interrupts that may need to be serviced while this transfer is 649 * in progress are enabled. 650 */ 651 static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 652 { 653 u8 hc_num = chan->hc_num; 654 u32 hcintmsk; 655 u32 hcchar; 656 u32 hcsplt = 0; 657 658 if (dbg_hc(chan)) 659 dev_vdbg(hsotg->dev, "%s()\n", __func__); 660 661 /* Clear old interrupt conditions for this host channel */ 662 hcintmsk = 0xffffffff; 663 hcintmsk &= ~HCINTMSK_RESERVED14_31; 664 dwc2_writel(hsotg, hcintmsk, HCINT(hc_num)); 665 666 /* Enable channel interrupts required for this transfer */ 667 dwc2_hc_enable_ints(hsotg, chan); 668 669 /* 670 * Program the HCCHARn register with the endpoint characteristics for 671 * the current transfer 672 */ 673 hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; 674 hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; 675 if (chan->ep_is_in) 676 hcchar |= HCCHAR_EPDIR; 677 if (chan->speed == USB_SPEED_LOW) 678 hcchar |= HCCHAR_LSPDDEV; 679 hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; 680 hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; 681 dwc2_writel(hsotg, hcchar, HCCHAR(hc_num)); 682 if (dbg_hc(chan)) { 683 dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", 684 hc_num, hcchar); 685 686 dev_vdbg(hsotg->dev, "%s: Channel %d\n", 687 __func__, hc_num); 688 dev_vdbg(hsotg->dev, " Dev Addr: %d\n", 689 chan->dev_addr); 690 dev_vdbg(hsotg->dev, " Ep Num: %d\n", 691 chan->ep_num); 692 dev_vdbg(hsotg->dev, " Is In: %d\n", 693 chan->ep_is_in); 694 dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", 695 chan->speed == USB_SPEED_LOW); 696 dev_vdbg(hsotg->dev, " Ep Type: %d\n", 697 chan->ep_type); 698 dev_vdbg(hsotg->dev, " Max Pkt: %d\n", 699 chan->max_packet); 700 } 701 702 /* Program the HCSPLT register for SPLITs */ 703 if (chan->do_split) { 704 if (dbg_hc(chan)) 705 dev_vdbg(hsotg->dev, 706 "Programming HC %d with split --> %s\n", 707 hc_num, 708 chan->complete_split ? "CSPLIT" : "SSPLIT"); 709 if (chan->complete_split) 710 hcsplt |= HCSPLT_COMPSPLT; 711 hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & 712 HCSPLT_XACTPOS_MASK; 713 hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & 714 HCSPLT_HUBADDR_MASK; 715 hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & 716 HCSPLT_PRTADDR_MASK; 717 if (dbg_hc(chan)) { 718 dev_vdbg(hsotg->dev, " comp split %d\n", 719 chan->complete_split); 720 dev_vdbg(hsotg->dev, " xact pos %d\n", 721 chan->xact_pos); 722 dev_vdbg(hsotg->dev, " hub addr %d\n", 723 chan->hub_addr); 724 dev_vdbg(hsotg->dev, " hub port %d\n", 725 chan->hub_port); 726 dev_vdbg(hsotg->dev, " is_in %d\n", 727 chan->ep_is_in); 728 dev_vdbg(hsotg->dev, " Max Pkt %d\n", 729 chan->max_packet); 730 dev_vdbg(hsotg->dev, " xferlen %d\n", 731 chan->xfer_len); 732 } 733 } 734 735 dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num)); 736 } 737 738 /** 739 * dwc2_hc_halt() - Attempts to halt a host channel 740 * 741 * @hsotg: Controller register interface 742 * @chan: Host channel to halt 743 * @halt_status: Reason for halting the channel 744 * 745 * This function should only be called in Slave mode or to abort a transfer in 746 * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the 747 * controller halts the channel when the transfer is complete or a condition 748 * occurs that requires application intervention. 749 * 750 * In slave mode, checks for a free request queue entry, then sets the Channel 751 * Enable and Channel Disable bits of the Host Channel Characteristics 752 * register of the specified channel to intiate the halt. If there is no free 753 * request queue entry, sets only the Channel Disable bit of the HCCHARn 754 * register to flush requests for this channel. In the latter case, sets a 755 * flag to indicate that the host channel needs to be halted when a request 756 * queue slot is open. 757 * 758 * In DMA mode, always sets the Channel Enable and Channel Disable bits of the 759 * HCCHARn register. The controller ensures there is space in the request 760 * queue before submitting the halt request. 761 * 762 * Some time may elapse before the core flushes any posted requests for this 763 * host channel and halts. The Channel Halted interrupt handler completes the 764 * deactivation of the host channel. 765 */ 766 void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, 767 enum dwc2_halt_status halt_status) 768 { 769 u32 nptxsts, hptxsts, hcchar; 770 771 if (dbg_hc(chan)) 772 dev_vdbg(hsotg->dev, "%s()\n", __func__); 773 774 /* 775 * In buffer DMA or external DMA mode channel can't be halted 776 * for non-split periodic channels. At the end of the next 777 * uframe/frame (in the worst case), the core generates a channel 778 * halted and disables the channel automatically. 779 */ 780 if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) || 781 hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) { 782 if (!chan->do_split && 783 (chan->ep_type == USB_ENDPOINT_XFER_ISOC || 784 chan->ep_type == USB_ENDPOINT_XFER_INT)) { 785 dev_err(hsotg->dev, "%s() Channel can't be halted\n", 786 __func__); 787 return; 788 } 789 } 790 791 if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) 792 dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); 793 794 if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || 795 halt_status == DWC2_HC_XFER_AHB_ERR) { 796 /* 797 * Disable all channel interrupts except Ch Halted. The QTD 798 * and QH state associated with this transfer has been cleared 799 * (in the case of URB_DEQUEUE), so the channel needs to be 800 * shut down carefully to prevent crashes. 801 */ 802 u32 hcintmsk = HCINTMSK_CHHLTD; 803 804 dev_vdbg(hsotg->dev, "dequeue/error\n"); 805 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); 806 807 /* 808 * Make sure no other interrupts besides halt are currently 809 * pending. Handling another interrupt could cause a crash due 810 * to the QTD and QH state. 811 */ 812 dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num)); 813 814 /* 815 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR 816 * even if the channel was already halted for some other 817 * reason 818 */ 819 chan->halt_status = halt_status; 820 821 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 822 if (!(hcchar & HCCHAR_CHENA)) { 823 /* 824 * The channel is either already halted or it hasn't 825 * started yet. In DMA mode, the transfer may halt if 826 * it finishes normally or a condition occurs that 827 * requires driver intervention. Don't want to halt 828 * the channel again. In either Slave or DMA mode, 829 * it's possible that the transfer has been assigned 830 * to a channel, but not started yet when an URB is 831 * dequeued. Don't want to halt a channel that hasn't 832 * started yet. 833 */ 834 return; 835 } 836 } 837 if (chan->halt_pending) { 838 /* 839 * A halt has already been issued for this channel. This might 840 * happen when a transfer is aborted by a higher level in 841 * the stack. 842 */ 843 dev_vdbg(hsotg->dev, 844 "*** %s: Channel %d, chan->halt_pending already set ***\n", 845 __func__, chan->hc_num); 846 return; 847 } 848 849 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 850 851 /* No need to set the bit in DDMA for disabling the channel */ 852 /* TODO check it everywhere channel is disabled */ 853 if (!hsotg->params.dma_desc_enable) { 854 if (dbg_hc(chan)) 855 dev_vdbg(hsotg->dev, "desc DMA disabled\n"); 856 hcchar |= HCCHAR_CHENA; 857 } else { 858 if (dbg_hc(chan)) 859 dev_dbg(hsotg->dev, "desc DMA enabled\n"); 860 } 861 hcchar |= HCCHAR_CHDIS; 862 863 if (!hsotg->params.host_dma) { 864 if (dbg_hc(chan)) 865 dev_vdbg(hsotg->dev, "DMA not enabled\n"); 866 hcchar |= HCCHAR_CHENA; 867 868 /* Check for space in the request queue to issue the halt */ 869 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || 870 chan->ep_type == USB_ENDPOINT_XFER_BULK) { 871 dev_vdbg(hsotg->dev, "control/bulk\n"); 872 nptxsts = dwc2_readl(hsotg, GNPTXSTS); 873 if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { 874 dev_vdbg(hsotg->dev, "Disabling channel\n"); 875 hcchar &= ~HCCHAR_CHENA; 876 } 877 } else { 878 if (dbg_perio()) 879 dev_vdbg(hsotg->dev, "isoc/intr\n"); 880 hptxsts = dwc2_readl(hsotg, HPTXSTS); 881 if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || 882 hsotg->queuing_high_bandwidth) { 883 if (dbg_perio()) 884 dev_vdbg(hsotg->dev, "Disabling channel\n"); 885 hcchar &= ~HCCHAR_CHENA; 886 } 887 } 888 } else { 889 if (dbg_hc(chan)) 890 dev_vdbg(hsotg->dev, "DMA enabled\n"); 891 } 892 893 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 894 chan->halt_status = halt_status; 895 896 if (hcchar & HCCHAR_CHENA) { 897 if (dbg_hc(chan)) 898 dev_vdbg(hsotg->dev, "Channel enabled\n"); 899 chan->halt_pending = 1; 900 chan->halt_on_queue = 0; 901 } else { 902 if (dbg_hc(chan)) 903 dev_vdbg(hsotg->dev, "Channel disabled\n"); 904 chan->halt_on_queue = 1; 905 } 906 907 if (dbg_hc(chan)) { 908 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 909 chan->hc_num); 910 dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", 911 hcchar); 912 dev_vdbg(hsotg->dev, " halt_pending: %d\n", 913 chan->halt_pending); 914 dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", 915 chan->halt_on_queue); 916 dev_vdbg(hsotg->dev, " halt_status: %d\n", 917 chan->halt_status); 918 } 919 } 920 921 /** 922 * dwc2_hc_cleanup() - Clears the transfer state for a host channel 923 * 924 * @hsotg: Programming view of DWC_otg controller 925 * @chan: Identifies the host channel to clean up 926 * 927 * This function is normally called after a transfer is done and the host 928 * channel is being released 929 */ 930 void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) 931 { 932 u32 hcintmsk; 933 934 chan->xfer_started = 0; 935 936 list_del_init(&chan->split_order_list_entry); 937 938 /* 939 * Clear channel interrupt enables and any unhandled channel interrupt 940 * conditions 941 */ 942 dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num)); 943 hcintmsk = 0xffffffff; 944 hcintmsk &= ~HCINTMSK_RESERVED14_31; 945 dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num)); 946 } 947 948 /** 949 * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in 950 * which frame a periodic transfer should occur 951 * 952 * @hsotg: Programming view of DWC_otg controller 953 * @chan: Identifies the host channel to set up and its properties 954 * @hcchar: Current value of the HCCHAR register for the specified host channel 955 * 956 * This function has no effect on non-periodic transfers 957 */ 958 static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, 959 struct dwc2_host_chan *chan, u32 *hcchar) 960 { 961 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 962 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 963 int host_speed; 964 int xfer_ns; 965 int xfer_us; 966 int bytes_in_fifo; 967 u16 fifo_space; 968 u16 frame_number; 969 u16 wire_frame; 970 971 /* 972 * Try to figure out if we're an even or odd frame. If we set 973 * even and the current frame number is even the transfer 974 * will happen immediately. Similar if both are odd. If one is 975 * even and the other is odd then the transfer will happen when 976 * the frame number ticks. 977 * 978 * There's a bit of a balancing act to get this right. 979 * Sometimes we may want to send data in the current frame (AK 980 * right away). We might want to do this if the frame number 981 * _just_ ticked, but we might also want to do this in order 982 * to continue a split transaction that happened late in a 983 * microframe (so we didn't know to queue the next transfer 984 * until the frame number had ticked). The problem is that we 985 * need a lot of knowledge to know if there's actually still 986 * time to send things or if it would be better to wait until 987 * the next frame. 988 * 989 * We can look at how much time is left in the current frame 990 * and make a guess about whether we'll have time to transfer. 991 * We'll do that. 992 */ 993 994 /* Get speed host is running at */ 995 host_speed = (chan->speed != USB_SPEED_HIGH && 996 !chan->do_split) ? chan->speed : USB_SPEED_HIGH; 997 998 /* See how many bytes are in the periodic FIFO right now */ 999 fifo_space = (dwc2_readl(hsotg, HPTXSTS) & 1000 TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT; 1001 bytes_in_fifo = sizeof(u32) * 1002 (hsotg->params.host_perio_tx_fifo_size - 1003 fifo_space); 1004 1005 /* 1006 * Roughly estimate bus time for everything in the periodic 1007 * queue + our new transfer. This is "rough" because we're 1008 * using a function that makes takes into account IN/OUT 1009 * and INT/ISO and we're just slamming in one value for all 1010 * transfers. This should be an over-estimate and that should 1011 * be OK, but we can probably tighten it. 1012 */ 1013 xfer_ns = usb_calc_bus_time(host_speed, false, false, 1014 chan->xfer_len + bytes_in_fifo); 1015 xfer_us = NS_TO_US(xfer_ns); 1016 1017 /* See what frame number we'll be at by the time we finish */ 1018 frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us); 1019 1020 /* This is when we were scheduled to be on the wire */ 1021 wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1); 1022 1023 /* 1024 * If we'd finish _after_ the frame we're scheduled in then 1025 * it's hopeless. Just schedule right away and hope for the 1026 * best. Note that it _might_ be wise to call back into the 1027 * scheduler to pick a better frame, but this is better than 1028 * nothing. 1029 */ 1030 if (dwc2_frame_num_gt(frame_number, wire_frame)) { 1031 dwc2_sch_vdbg(hsotg, 1032 "QH=%p EO MISS fr=%04x=>%04x (%+d)\n", 1033 chan->qh, wire_frame, frame_number, 1034 dwc2_frame_num_dec(frame_number, 1035 wire_frame)); 1036 wire_frame = frame_number; 1037 1038 /* 1039 * We picked a different frame number; communicate this 1040 * back to the scheduler so it doesn't try to schedule 1041 * another in the same frame. 1042 * 1043 * Remember that next_active_frame is 1 before the wire 1044 * frame. 1045 */ 1046 chan->qh->next_active_frame = 1047 dwc2_frame_num_dec(frame_number, 1); 1048 } 1049 1050 if (wire_frame & 1) 1051 *hcchar |= HCCHAR_ODDFRM; 1052 else 1053 *hcchar &= ~HCCHAR_ODDFRM; 1054 } 1055 } 1056 1057 static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) 1058 { 1059 /* Set up the initial PID for the transfer */ 1060 if (chan->speed == USB_SPEED_HIGH) { 1061 if (chan->ep_is_in) { 1062 if (chan->multi_count == 1) 1063 chan->data_pid_start = DWC2_HC_PID_DATA0; 1064 else if (chan->multi_count == 2) 1065 chan->data_pid_start = DWC2_HC_PID_DATA1; 1066 else 1067 chan->data_pid_start = DWC2_HC_PID_DATA2; 1068 } else { 1069 if (chan->multi_count == 1) 1070 chan->data_pid_start = DWC2_HC_PID_DATA0; 1071 else 1072 chan->data_pid_start = DWC2_HC_PID_MDATA; 1073 } 1074 } else { 1075 chan->data_pid_start = DWC2_HC_PID_DATA0; 1076 } 1077 } 1078 1079 /** 1080 * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with 1081 * the Host Channel 1082 * 1083 * @hsotg: Programming view of DWC_otg controller 1084 * @chan: Information needed to initialize the host channel 1085 * 1086 * This function should only be called in Slave mode. For a channel associated 1087 * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel 1088 * associated with a periodic EP, the periodic Tx FIFO is written. 1089 * 1090 * Upon return the xfer_buf and xfer_count fields in chan are incremented by 1091 * the number of bytes written to the Tx FIFO. 1092 */ 1093 static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, 1094 struct dwc2_host_chan *chan) 1095 { 1096 u32 i; 1097 u32 remaining_count; 1098 u32 byte_count; 1099 u32 dword_count; 1100 u32 *data_buf = (u32 *)chan->xfer_buf; 1101 1102 if (dbg_hc(chan)) 1103 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1104 1105 remaining_count = chan->xfer_len - chan->xfer_count; 1106 if (remaining_count > chan->max_packet) 1107 byte_count = chan->max_packet; 1108 else 1109 byte_count = remaining_count; 1110 1111 dword_count = (byte_count + 3) / 4; 1112 1113 if (((unsigned long)data_buf & 0x3) == 0) { 1114 /* xfer_buf is DWORD aligned */ 1115 for (i = 0; i < dword_count; i++, data_buf++) 1116 dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num)); 1117 } else { 1118 /* xfer_buf is not DWORD aligned */ 1119 for (i = 0; i < dword_count; i++, data_buf++) { 1120 u32 data = data_buf[0] | data_buf[1] << 8 | 1121 data_buf[2] << 16 | data_buf[3] << 24; 1122 dwc2_writel(hsotg, data, HCFIFO(chan->hc_num)); 1123 } 1124 } 1125 1126 chan->xfer_count += byte_count; 1127 chan->xfer_buf += byte_count; 1128 } 1129 1130 /** 1131 * dwc2_hc_do_ping() - Starts a PING transfer 1132 * 1133 * @hsotg: Programming view of DWC_otg controller 1134 * @chan: Information needed to initialize the host channel 1135 * 1136 * This function should only be called in Slave mode. The Do Ping bit is set in 1137 * the HCTSIZ register, then the channel is enabled. 1138 */ 1139 static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, 1140 struct dwc2_host_chan *chan) 1141 { 1142 u32 hcchar; 1143 u32 hctsiz; 1144 1145 if (dbg_hc(chan)) 1146 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1147 chan->hc_num); 1148 1149 hctsiz = TSIZ_DOPNG; 1150 hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; 1151 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1152 1153 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1154 hcchar |= HCCHAR_CHENA; 1155 hcchar &= ~HCCHAR_CHDIS; 1156 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1157 } 1158 1159 /** 1160 * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host 1161 * channel and starts the transfer 1162 * 1163 * @hsotg: Programming view of DWC_otg controller 1164 * @chan: Information needed to initialize the host channel. The xfer_len value 1165 * may be reduced to accommodate the max widths of the XferSize and 1166 * PktCnt fields in the HCTSIZn register. The multi_count value may be 1167 * changed to reflect the final xfer_len value. 1168 * 1169 * This function may be called in either Slave mode or DMA mode. In Slave mode, 1170 * the caller must ensure that there is sufficient space in the request queue 1171 * and Tx Data FIFO. 1172 * 1173 * For an OUT transfer in Slave mode, it loads a data packet into the 1174 * appropriate FIFO. If necessary, additional data packets are loaded in the 1175 * Host ISR. 1176 * 1177 * For an IN transfer in Slave mode, a data packet is requested. The data 1178 * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, 1179 * additional data packets are requested in the Host ISR. 1180 * 1181 * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ 1182 * register along with a packet count of 1 and the channel is enabled. This 1183 * causes a single PING transaction to occur. Other fields in HCTSIZ are 1184 * simply set to 0 since no data transfer occurs in this case. 1185 * 1186 * For a PING transfer in DMA mode, the HCTSIZ register is initialized with 1187 * all the information required to perform the subsequent data transfer. In 1188 * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the 1189 * controller performs the entire PING protocol, then starts the data 1190 * transfer. 1191 */ 1192 static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, 1193 struct dwc2_host_chan *chan) 1194 { 1195 u32 max_hc_xfer_size = hsotg->params.max_transfer_size; 1196 u16 max_hc_pkt_count = hsotg->params.max_packet_count; 1197 u32 hcchar; 1198 u32 hctsiz = 0; 1199 u16 num_packets; 1200 u32 ec_mc; 1201 1202 if (dbg_hc(chan)) 1203 dev_vdbg(hsotg->dev, "%s()\n", __func__); 1204 1205 if (chan->do_ping) { 1206 if (!hsotg->params.host_dma) { 1207 if (dbg_hc(chan)) 1208 dev_vdbg(hsotg->dev, "ping, no DMA\n"); 1209 dwc2_hc_do_ping(hsotg, chan); 1210 chan->xfer_started = 1; 1211 return; 1212 } 1213 1214 if (dbg_hc(chan)) 1215 dev_vdbg(hsotg->dev, "ping, DMA\n"); 1216 1217 hctsiz |= TSIZ_DOPNG; 1218 } 1219 1220 if (chan->do_split) { 1221 if (dbg_hc(chan)) 1222 dev_vdbg(hsotg->dev, "split\n"); 1223 num_packets = 1; 1224 1225 if (chan->complete_split && !chan->ep_is_in) 1226 /* 1227 * For CSPLIT OUT Transfer, set the size to 0 so the 1228 * core doesn't expect any data written to the FIFO 1229 */ 1230 chan->xfer_len = 0; 1231 else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) 1232 chan->xfer_len = chan->max_packet; 1233 else if (!chan->ep_is_in && chan->xfer_len > 188) 1234 chan->xfer_len = 188; 1235 1236 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1237 TSIZ_XFERSIZE_MASK; 1238 1239 /* For split set ec_mc for immediate retries */ 1240 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1241 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1242 ec_mc = 3; 1243 else 1244 ec_mc = 1; 1245 } else { 1246 if (dbg_hc(chan)) 1247 dev_vdbg(hsotg->dev, "no split\n"); 1248 /* 1249 * Ensure that the transfer length and packet count will fit 1250 * in the widths allocated for them in the HCTSIZn register 1251 */ 1252 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1253 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1254 /* 1255 * Make sure the transfer size is no larger than one 1256 * (micro)frame's worth of data. (A check was done 1257 * when the periodic transfer was accepted to ensure 1258 * that a (micro)frame's worth of data can be 1259 * programmed into a channel.) 1260 */ 1261 u32 max_periodic_len = 1262 chan->multi_count * chan->max_packet; 1263 1264 if (chan->xfer_len > max_periodic_len) 1265 chan->xfer_len = max_periodic_len; 1266 } else if (chan->xfer_len > max_hc_xfer_size) { 1267 /* 1268 * Make sure that xfer_len is a multiple of max packet 1269 * size 1270 */ 1271 chan->xfer_len = 1272 max_hc_xfer_size - chan->max_packet + 1; 1273 } 1274 1275 if (chan->xfer_len > 0) { 1276 num_packets = (chan->xfer_len + chan->max_packet - 1) / 1277 chan->max_packet; 1278 if (num_packets > max_hc_pkt_count) { 1279 num_packets = max_hc_pkt_count; 1280 chan->xfer_len = num_packets * chan->max_packet; 1281 } else if (chan->ep_is_in) { 1282 /* 1283 * Always program an integral # of max packets 1284 * for IN transfers. 1285 * Note: This assumes that the input buffer is 1286 * aligned and sized accordingly. 1287 */ 1288 chan->xfer_len = num_packets * chan->max_packet; 1289 } 1290 } else { 1291 /* Need 1 packet for transfer length of 0 */ 1292 num_packets = 1; 1293 } 1294 1295 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1296 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1297 /* 1298 * Make sure that the multi_count field matches the 1299 * actual transfer length 1300 */ 1301 chan->multi_count = num_packets; 1302 1303 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1304 dwc2_set_pid_isoc(chan); 1305 1306 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & 1307 TSIZ_XFERSIZE_MASK; 1308 1309 /* The ec_mc gets the multi_count for non-split */ 1310 ec_mc = chan->multi_count; 1311 } 1312 1313 chan->start_pkt_count = num_packets; 1314 hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; 1315 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1316 TSIZ_SC_MC_PID_MASK; 1317 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1318 if (dbg_hc(chan)) { 1319 dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", 1320 hctsiz, chan->hc_num); 1321 1322 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1323 chan->hc_num); 1324 dev_vdbg(hsotg->dev, " Xfer Size: %d\n", 1325 (hctsiz & TSIZ_XFERSIZE_MASK) >> 1326 TSIZ_XFERSIZE_SHIFT); 1327 dev_vdbg(hsotg->dev, " Num Pkts: %d\n", 1328 (hctsiz & TSIZ_PKTCNT_MASK) >> 1329 TSIZ_PKTCNT_SHIFT); 1330 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1331 (hctsiz & TSIZ_SC_MC_PID_MASK) >> 1332 TSIZ_SC_MC_PID_SHIFT); 1333 } 1334 1335 if (hsotg->params.host_dma) { 1336 dma_addr_t dma_addr; 1337 1338 if (chan->align_buf) { 1339 if (dbg_hc(chan)) 1340 dev_vdbg(hsotg->dev, "align_buf\n"); 1341 dma_addr = chan->align_buf; 1342 } else { 1343 dma_addr = chan->xfer_dma; 1344 } 1345 dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num)); 1346 1347 if (dbg_hc(chan)) 1348 dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", 1349 (unsigned long)dma_addr, chan->hc_num); 1350 } 1351 1352 /* Start the split */ 1353 if (chan->do_split) { 1354 u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); 1355 1356 hcsplt |= HCSPLT_SPLTENA; 1357 dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num)); 1358 } 1359 1360 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1361 hcchar &= ~HCCHAR_MULTICNT_MASK; 1362 hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK; 1363 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1364 1365 if (hcchar & HCCHAR_CHDIS) 1366 dev_warn(hsotg->dev, 1367 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1368 __func__, chan->hc_num, hcchar); 1369 1370 /* Set host channel enable after all other setup is complete */ 1371 hcchar |= HCCHAR_CHENA; 1372 hcchar &= ~HCCHAR_CHDIS; 1373 1374 if (dbg_hc(chan)) 1375 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1376 (hcchar & HCCHAR_MULTICNT_MASK) >> 1377 HCCHAR_MULTICNT_SHIFT); 1378 1379 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1380 if (dbg_hc(chan)) 1381 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1382 chan->hc_num); 1383 1384 chan->xfer_started = 1; 1385 chan->requests++; 1386 1387 if (!hsotg->params.host_dma && 1388 !chan->ep_is_in && chan->xfer_len > 0) 1389 /* Load OUT packet into the appropriate Tx FIFO */ 1390 dwc2_hc_write_packet(hsotg, chan); 1391 } 1392 1393 /** 1394 * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a 1395 * host channel and starts the transfer in Descriptor DMA mode 1396 * 1397 * @hsotg: Programming view of DWC_otg controller 1398 * @chan: Information needed to initialize the host channel 1399 * 1400 * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. 1401 * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field 1402 * with micro-frame bitmap. 1403 * 1404 * Initializes HCDMA register with descriptor list address and CTD value then 1405 * starts the transfer via enabling the channel. 1406 */ 1407 void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, 1408 struct dwc2_host_chan *chan) 1409 { 1410 u32 hcchar; 1411 u32 hctsiz = 0; 1412 1413 if (chan->do_ping) 1414 hctsiz |= TSIZ_DOPNG; 1415 1416 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) 1417 dwc2_set_pid_isoc(chan); 1418 1419 /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ 1420 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & 1421 TSIZ_SC_MC_PID_MASK; 1422 1423 /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ 1424 hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; 1425 1426 /* Non-zero only for high-speed interrupt endpoints */ 1427 hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; 1428 1429 if (dbg_hc(chan)) { 1430 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1431 chan->hc_num); 1432 dev_vdbg(hsotg->dev, " Start PID: %d\n", 1433 chan->data_pid_start); 1434 dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); 1435 } 1436 1437 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); 1438 1439 dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr, 1440 chan->desc_list_sz, DMA_TO_DEVICE); 1441 1442 dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num)); 1443 1444 if (dbg_hc(chan)) 1445 dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n", 1446 &chan->desc_list_addr, chan->hc_num); 1447 1448 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1449 hcchar &= ~HCCHAR_MULTICNT_MASK; 1450 hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & 1451 HCCHAR_MULTICNT_MASK; 1452 1453 if (hcchar & HCCHAR_CHDIS) 1454 dev_warn(hsotg->dev, 1455 "%s: chdis set, channel %d, hcchar 0x%08x\n", 1456 __func__, chan->hc_num, hcchar); 1457 1458 /* Set host channel enable after all other setup is complete */ 1459 hcchar |= HCCHAR_CHENA; 1460 hcchar &= ~HCCHAR_CHDIS; 1461 1462 if (dbg_hc(chan)) 1463 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", 1464 (hcchar & HCCHAR_MULTICNT_MASK) >> 1465 HCCHAR_MULTICNT_SHIFT); 1466 1467 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1468 if (dbg_hc(chan)) 1469 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, 1470 chan->hc_num); 1471 1472 chan->xfer_started = 1; 1473 chan->requests++; 1474 } 1475 1476 /** 1477 * dwc2_hc_continue_transfer() - Continues a data transfer that was started by 1478 * a previous call to dwc2_hc_start_transfer() 1479 * 1480 * @hsotg: Programming view of DWC_otg controller 1481 * @chan: Information needed to initialize the host channel 1482 * 1483 * The caller must ensure there is sufficient space in the request queue and Tx 1484 * Data FIFO. This function should only be called in Slave mode. In DMA mode, 1485 * the controller acts autonomously to complete transfers programmed to a host 1486 * channel. 1487 * 1488 * For an OUT transfer, a new data packet is loaded into the appropriate FIFO 1489 * if there is any data remaining to be queued. For an IN transfer, another 1490 * data packet is always requested. For the SETUP phase of a control transfer, 1491 * this function does nothing. 1492 * 1493 * Return: 1 if a new request is queued, 0 if no more requests are required 1494 * for this transfer 1495 */ 1496 static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, 1497 struct dwc2_host_chan *chan) 1498 { 1499 if (dbg_hc(chan)) 1500 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, 1501 chan->hc_num); 1502 1503 if (chan->do_split) 1504 /* SPLITs always queue just once per channel */ 1505 return 0; 1506 1507 if (chan->data_pid_start == DWC2_HC_PID_SETUP) 1508 /* SETUPs are queued only once since they can't be NAK'd */ 1509 return 0; 1510 1511 if (chan->ep_is_in) { 1512 /* 1513 * Always queue another request for other IN transfers. If 1514 * back-to-back INs are issued and NAKs are received for both, 1515 * the driver may still be processing the first NAK when the 1516 * second NAK is received. When the interrupt handler clears 1517 * the NAK interrupt for the first NAK, the second NAK will 1518 * not be seen. So we can't depend on the NAK interrupt 1519 * handler to requeue a NAK'd request. Instead, IN requests 1520 * are issued each time this function is called. When the 1521 * transfer completes, the extra requests for the channel will 1522 * be flushed. 1523 */ 1524 u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); 1525 1526 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); 1527 hcchar |= HCCHAR_CHENA; 1528 hcchar &= ~HCCHAR_CHDIS; 1529 if (dbg_hc(chan)) 1530 dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", 1531 hcchar); 1532 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); 1533 chan->requests++; 1534 return 1; 1535 } 1536 1537 /* OUT transfers */ 1538 1539 if (chan->xfer_count < chan->xfer_len) { 1540 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 1541 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 1542 u32 hcchar = dwc2_readl(hsotg, 1543 HCCHAR(chan->hc_num)); 1544 1545 dwc2_hc_set_even_odd_frame(hsotg, chan, 1546 &hcchar); 1547 } 1548 1549 /* Load OUT packet into the appropriate Tx FIFO */ 1550 dwc2_hc_write_packet(hsotg, chan); 1551 chan->requests++; 1552 return 1; 1553 } 1554 1555 return 0; 1556 } 1557 1558 /* 1559 * ========================================================================= 1560 * HCD 1561 * ========================================================================= 1562 */ 1563 1564 /* 1565 * Processes all the URBs in a single list of QHs. Completes them with 1566 * -ETIMEDOUT and frees the QTD. 1567 * 1568 * Must be called with interrupt disabled and spinlock held 1569 */ 1570 static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, 1571 struct list_head *qh_list) 1572 { 1573 struct dwc2_qh *qh, *qh_tmp; 1574 struct dwc2_qtd *qtd, *qtd_tmp; 1575 1576 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1577 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1578 qtd_list_entry) { 1579 dwc2_host_complete(hsotg, qtd, -ECONNRESET); 1580 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1581 } 1582 } 1583 } 1584 1585 static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, 1586 struct list_head *qh_list) 1587 { 1588 struct dwc2_qtd *qtd, *qtd_tmp; 1589 struct dwc2_qh *qh, *qh_tmp; 1590 unsigned long flags; 1591 1592 if (!qh_list->next) 1593 /* The list hasn't been initialized yet */ 1594 return; 1595 1596 spin_lock_irqsave(&hsotg->lock, flags); 1597 1598 /* Ensure there are no QTDs or URBs left */ 1599 dwc2_kill_urbs_in_qh_list(hsotg, qh_list); 1600 1601 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { 1602 dwc2_hcd_qh_unlink(hsotg, qh); 1603 1604 /* Free each QTD in the QH's QTD list */ 1605 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, 1606 qtd_list_entry) 1607 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 1608 1609 if (qh->channel && qh->channel->qh == qh) 1610 qh->channel->qh = NULL; 1611 1612 spin_unlock_irqrestore(&hsotg->lock, flags); 1613 dwc2_hcd_qh_free(hsotg, qh); 1614 spin_lock_irqsave(&hsotg->lock, flags); 1615 } 1616 1617 spin_unlock_irqrestore(&hsotg->lock, flags); 1618 } 1619 1620 /* 1621 * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic 1622 * and periodic schedules. The QTD associated with each URB is removed from 1623 * the schedule and freed. This function may be called when a disconnect is 1624 * detected or when the HCD is being stopped. 1625 * 1626 * Must be called with interrupt disabled and spinlock held 1627 */ 1628 static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) 1629 { 1630 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); 1631 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting); 1632 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); 1633 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); 1634 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); 1635 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); 1636 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); 1637 } 1638 1639 /** 1640 * dwc2_hcd_start() - Starts the HCD when switching to Host mode 1641 * 1642 * @hsotg: Pointer to struct dwc2_hsotg 1643 */ 1644 void dwc2_hcd_start(struct dwc2_hsotg *hsotg) 1645 { 1646 u32 hprt0; 1647 1648 if (hsotg->op_state == OTG_STATE_B_HOST) { 1649 /* 1650 * Reset the port. During a HNP mode switch the reset 1651 * needs to occur within 1ms and have a duration of at 1652 * least 50ms. 1653 */ 1654 hprt0 = dwc2_read_hprt0(hsotg); 1655 hprt0 |= HPRT0_RST; 1656 dwc2_writel(hsotg, hprt0, HPRT0); 1657 } 1658 1659 queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, 1660 msecs_to_jiffies(50)); 1661 } 1662 1663 /* Must be called with interrupt disabled and spinlock held */ 1664 static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) 1665 { 1666 int num_channels = hsotg->params.host_channels; 1667 struct dwc2_host_chan *channel; 1668 u32 hcchar; 1669 int i; 1670 1671 if (!hsotg->params.host_dma) { 1672 /* Flush out any channel requests in slave mode */ 1673 for (i = 0; i < num_channels; i++) { 1674 channel = hsotg->hc_ptr_array[i]; 1675 if (!list_empty(&channel->hc_list_entry)) 1676 continue; 1677 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1678 if (hcchar & HCCHAR_CHENA) { 1679 hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); 1680 hcchar |= HCCHAR_CHDIS; 1681 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1682 } 1683 } 1684 } 1685 1686 for (i = 0; i < num_channels; i++) { 1687 channel = hsotg->hc_ptr_array[i]; 1688 if (!list_empty(&channel->hc_list_entry)) 1689 continue; 1690 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 1691 if (hcchar & HCCHAR_CHENA) { 1692 /* Halt the channel */ 1693 hcchar |= HCCHAR_CHDIS; 1694 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 1695 } 1696 1697 dwc2_hc_cleanup(hsotg, channel); 1698 list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); 1699 /* 1700 * Added for Descriptor DMA to prevent channel double cleanup in 1701 * release_channel_ddma(), which is called from ep_disable when 1702 * device disconnects 1703 */ 1704 channel->qh = NULL; 1705 } 1706 /* All channels have been freed, mark them available */ 1707 if (hsotg->params.uframe_sched) { 1708 hsotg->available_host_channels = 1709 hsotg->params.host_channels; 1710 } else { 1711 hsotg->non_periodic_channels = 0; 1712 hsotg->periodic_channels = 0; 1713 } 1714 } 1715 1716 /** 1717 * dwc2_hcd_connect() - Handles connect of the HCD 1718 * 1719 * @hsotg: Pointer to struct dwc2_hsotg 1720 * 1721 * Must be called with interrupt disabled and spinlock held 1722 */ 1723 void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) 1724 { 1725 if (hsotg->lx_state != DWC2_L0) 1726 usb_hcd_resume_root_hub(hsotg->priv); 1727 1728 hsotg->flags.b.port_connect_status_change = 1; 1729 hsotg->flags.b.port_connect_status = 1; 1730 } 1731 1732 /** 1733 * dwc2_hcd_disconnect() - Handles disconnect of the HCD 1734 * 1735 * @hsotg: Pointer to struct dwc2_hsotg 1736 * @force: If true, we won't try to reconnect even if we see device connected. 1737 * 1738 * Must be called with interrupt disabled and spinlock held 1739 */ 1740 void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) 1741 { 1742 u32 intr; 1743 u32 hprt0; 1744 1745 /* Set status flags for the hub driver */ 1746 hsotg->flags.b.port_connect_status_change = 1; 1747 hsotg->flags.b.port_connect_status = 0; 1748 1749 /* 1750 * Shutdown any transfers in process by clearing the Tx FIFO Empty 1751 * interrupt mask and status bits and disabling subsequent host 1752 * channel interrupts. 1753 */ 1754 intr = dwc2_readl(hsotg, GINTMSK); 1755 intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); 1756 dwc2_writel(hsotg, intr, GINTMSK); 1757 intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; 1758 dwc2_writel(hsotg, intr, GINTSTS); 1759 1760 /* 1761 * Turn off the vbus power only if the core has transitioned to device 1762 * mode. If still in host mode, need to keep power on to detect a 1763 * reconnection. 1764 */ 1765 if (dwc2_is_device_mode(hsotg)) { 1766 if (hsotg->op_state != OTG_STATE_A_SUSPEND) { 1767 dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); 1768 dwc2_writel(hsotg, 0, HPRT0); 1769 } 1770 1771 dwc2_disable_host_interrupts(hsotg); 1772 } 1773 1774 /* Respond with an error status to all URBs in the schedule */ 1775 dwc2_kill_all_urbs(hsotg); 1776 1777 if (dwc2_is_host_mode(hsotg)) 1778 /* Clean up any host channels that were in use */ 1779 dwc2_hcd_cleanup_channels(hsotg); 1780 1781 dwc2_host_disconnect(hsotg); 1782 1783 /* 1784 * Add an extra check here to see if we're actually connected but 1785 * we don't have a detection interrupt pending. This can happen if: 1786 * 1. hardware sees connect 1787 * 2. hardware sees disconnect 1788 * 3. hardware sees connect 1789 * 4. dwc2_port_intr() - clears connect interrupt 1790 * 5. dwc2_handle_common_intr() - calls here 1791 * 1792 * Without the extra check here we will end calling disconnect 1793 * and won't get any future interrupts to handle the connect. 1794 */ 1795 if (!force) { 1796 hprt0 = dwc2_readl(hsotg, HPRT0); 1797 if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS)) 1798 dwc2_hcd_connect(hsotg); 1799 } 1800 } 1801 1802 /** 1803 * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup 1804 * 1805 * @hsotg: Pointer to struct dwc2_hsotg 1806 */ 1807 static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) 1808 { 1809 if (hsotg->bus_suspended) { 1810 hsotg->flags.b.port_suspend_change = 1; 1811 usb_hcd_resume_root_hub(hsotg->priv); 1812 } 1813 1814 if (hsotg->lx_state == DWC2_L1) 1815 hsotg->flags.b.port_l1_change = 1; 1816 } 1817 1818 /** 1819 * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner 1820 * 1821 * @hsotg: Pointer to struct dwc2_hsotg 1822 * 1823 * Must be called with interrupt disabled and spinlock held 1824 */ 1825 void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) 1826 { 1827 dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); 1828 1829 /* 1830 * The root hub should be disconnected before this function is called. 1831 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) 1832 * and the QH lists (via ..._hcd_endpoint_disable). 1833 */ 1834 1835 /* Turn off all host-specific interrupts */ 1836 dwc2_disable_host_interrupts(hsotg); 1837 1838 /* Turn off the vbus power */ 1839 dev_dbg(hsotg->dev, "PortPower off\n"); 1840 dwc2_writel(hsotg, 0, HPRT0); 1841 } 1842 1843 /* Caller must hold driver lock */ 1844 static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, 1845 struct dwc2_hcd_urb *urb, struct dwc2_qh *qh, 1846 struct dwc2_qtd *qtd) 1847 { 1848 u32 intr_mask; 1849 int retval; 1850 int dev_speed; 1851 1852 if (!hsotg->flags.b.port_connect_status) { 1853 /* No longer connected */ 1854 dev_err(hsotg->dev, "Not connected\n"); 1855 return -ENODEV; 1856 } 1857 1858 dev_speed = dwc2_host_get_speed(hsotg, urb->priv); 1859 1860 /* Some configurations cannot support LS traffic on a FS root port */ 1861 if ((dev_speed == USB_SPEED_LOW) && 1862 (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && 1863 (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { 1864 u32 hprt0 = dwc2_readl(hsotg, HPRT0); 1865 u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 1866 1867 if (prtspd == HPRT0_SPD_FULL_SPEED) 1868 return -ENODEV; 1869 } 1870 1871 if (!qtd) 1872 return -EINVAL; 1873 1874 dwc2_hcd_qtd_init(qtd, urb); 1875 retval = dwc2_hcd_qtd_add(hsotg, qtd, qh); 1876 if (retval) { 1877 dev_err(hsotg->dev, 1878 "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", 1879 retval); 1880 return retval; 1881 } 1882 1883 intr_mask = dwc2_readl(hsotg, GINTMSK); 1884 if (!(intr_mask & GINTSTS_SOF)) { 1885 enum dwc2_transaction_type tr_type; 1886 1887 if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && 1888 !(qtd->urb->flags & URB_GIVEBACK_ASAP)) 1889 /* 1890 * Do not schedule SG transactions until qtd has 1891 * URB_GIVEBACK_ASAP set 1892 */ 1893 return 0; 1894 1895 tr_type = dwc2_hcd_select_transactions(hsotg); 1896 if (tr_type != DWC2_TRANSACTION_NONE) 1897 dwc2_hcd_queue_transactions(hsotg, tr_type); 1898 } 1899 1900 return 0; 1901 } 1902 1903 /* Must be called with interrupt disabled and spinlock held */ 1904 static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, 1905 struct dwc2_hcd_urb *urb) 1906 { 1907 struct dwc2_qh *qh; 1908 struct dwc2_qtd *urb_qtd; 1909 1910 urb_qtd = urb->qtd; 1911 if (!urb_qtd) { 1912 dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); 1913 return -EINVAL; 1914 } 1915 1916 qh = urb_qtd->qh; 1917 if (!qh) { 1918 dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); 1919 return -EINVAL; 1920 } 1921 1922 urb->priv = NULL; 1923 1924 if (urb_qtd->in_process && qh->channel) { 1925 dwc2_dump_channel_info(hsotg, qh->channel); 1926 1927 /* The QTD is in process (it has been assigned to a channel) */ 1928 if (hsotg->flags.b.port_connect_status) 1929 /* 1930 * If still connected (i.e. in host mode), halt the 1931 * channel so it can be used for other transfers. If 1932 * no longer connected, the host registers can't be 1933 * written to halt the channel since the core is in 1934 * device mode. 1935 */ 1936 dwc2_hc_halt(hsotg, qh->channel, 1937 DWC2_HC_XFER_URB_DEQUEUE); 1938 } 1939 1940 /* 1941 * Free the QTD and clean up the associated QH. Leave the QH in the 1942 * schedule if it has any remaining QTDs. 1943 */ 1944 if (!hsotg->params.dma_desc_enable) { 1945 u8 in_process = urb_qtd->in_process; 1946 1947 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1948 if (in_process) { 1949 dwc2_hcd_qh_deactivate(hsotg, qh, 0); 1950 qh->channel = NULL; 1951 } else if (list_empty(&qh->qtd_list)) { 1952 dwc2_hcd_qh_unlink(hsotg, qh); 1953 } 1954 } else { 1955 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); 1956 } 1957 1958 return 0; 1959 } 1960 1961 /* Must NOT be called with interrupt disabled or spinlock held */ 1962 static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, 1963 struct usb_host_endpoint *ep, int retry) 1964 { 1965 struct dwc2_qtd *qtd, *qtd_tmp; 1966 struct dwc2_qh *qh; 1967 unsigned long flags; 1968 int rc; 1969 1970 spin_lock_irqsave(&hsotg->lock, flags); 1971 1972 qh = ep->hcpriv; 1973 if (!qh) { 1974 rc = -EINVAL; 1975 goto err; 1976 } 1977 1978 while (!list_empty(&qh->qtd_list) && retry--) { 1979 if (retry == 0) { 1980 dev_err(hsotg->dev, 1981 "## timeout in dwc2_hcd_endpoint_disable() ##\n"); 1982 rc = -EBUSY; 1983 goto err; 1984 } 1985 1986 spin_unlock_irqrestore(&hsotg->lock, flags); 1987 msleep(20); 1988 spin_lock_irqsave(&hsotg->lock, flags); 1989 qh = ep->hcpriv; 1990 if (!qh) { 1991 rc = -EINVAL; 1992 goto err; 1993 } 1994 } 1995 1996 dwc2_hcd_qh_unlink(hsotg, qh); 1997 1998 /* Free each QTD in the QH's QTD list */ 1999 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) 2000 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); 2001 2002 ep->hcpriv = NULL; 2003 2004 if (qh->channel && qh->channel->qh == qh) 2005 qh->channel->qh = NULL; 2006 2007 spin_unlock_irqrestore(&hsotg->lock, flags); 2008 2009 dwc2_hcd_qh_free(hsotg, qh); 2010 2011 return 0; 2012 2013 err: 2014 ep->hcpriv = NULL; 2015 spin_unlock_irqrestore(&hsotg->lock, flags); 2016 2017 return rc; 2018 } 2019 2020 /* Must be called with interrupt disabled and spinlock held */ 2021 static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, 2022 struct usb_host_endpoint *ep) 2023 { 2024 struct dwc2_qh *qh = ep->hcpriv; 2025 2026 if (!qh) 2027 return -EINVAL; 2028 2029 qh->data_toggle = DWC2_HC_PID_DATA0; 2030 2031 return 0; 2032 } 2033 2034 /** 2035 * dwc2_core_init() - Initializes the DWC_otg controller registers and 2036 * prepares the core for device mode or host mode operation 2037 * 2038 * @hsotg: Programming view of the DWC_otg controller 2039 * @initial_setup: If true then this is the first init for this instance. 2040 */ 2041 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) 2042 { 2043 u32 usbcfg, otgctl; 2044 int retval; 2045 2046 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2047 2048 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2049 2050 /* Set ULPI External VBUS bit if needed */ 2051 usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; 2052 if (hsotg->params.phy_ulpi_ext_vbus) 2053 usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; 2054 2055 /* Set external TS Dline pulsing bit if needed */ 2056 usbcfg &= ~GUSBCFG_TERMSELDLPULSE; 2057 if (hsotg->params.ts_dline) 2058 usbcfg |= GUSBCFG_TERMSELDLPULSE; 2059 2060 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2061 2062 /* 2063 * Reset the Controller 2064 * 2065 * We only need to reset the controller if this is a re-init. 2066 * For the first init we know for sure that earlier code reset us (it 2067 * needed to in order to properly detect various parameters). 2068 */ 2069 if (!initial_setup) { 2070 retval = dwc2_core_reset(hsotg, false); 2071 if (retval) { 2072 dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", 2073 __func__); 2074 return retval; 2075 } 2076 } 2077 2078 /* 2079 * This needs to happen in FS mode before any other programming occurs 2080 */ 2081 retval = dwc2_phy_init(hsotg, initial_setup); 2082 if (retval) 2083 return retval; 2084 2085 /* Program the GAHBCFG Register */ 2086 retval = dwc2_gahbcfg_init(hsotg); 2087 if (retval) 2088 return retval; 2089 2090 /* Program the GUSBCFG register */ 2091 dwc2_gusbcfg_init(hsotg); 2092 2093 /* Program the GOTGCTL register */ 2094 otgctl = dwc2_readl(hsotg, GOTGCTL); 2095 otgctl &= ~GOTGCTL_OTGVER; 2096 dwc2_writel(hsotg, otgctl, GOTGCTL); 2097 2098 /* Clear the SRP success bit for FS-I2c */ 2099 hsotg->srp_success = 0; 2100 2101 /* Enable common interrupts */ 2102 dwc2_enable_common_interrupts(hsotg); 2103 2104 /* 2105 * Do device or host initialization based on mode during PCD and 2106 * HCD initialization 2107 */ 2108 if (dwc2_is_host_mode(hsotg)) { 2109 dev_dbg(hsotg->dev, "Host Mode\n"); 2110 hsotg->op_state = OTG_STATE_A_HOST; 2111 } else { 2112 dev_dbg(hsotg->dev, "Device Mode\n"); 2113 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 2114 } 2115 2116 return 0; 2117 } 2118 2119 /** 2120 * dwc2_core_host_init() - Initializes the DWC_otg controller registers for 2121 * Host mode 2122 * 2123 * @hsotg: Programming view of DWC_otg controller 2124 * 2125 * This function flushes the Tx and Rx FIFOs and flushes any entries in the 2126 * request queues. Host channels are reset to ensure that they are ready for 2127 * performing transfers. 2128 */ 2129 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg) 2130 { 2131 u32 hcfg, hfir, otgctl, usbcfg; 2132 2133 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); 2134 2135 /* Set HS/FS Timeout Calibration to 7 (max available value). 2136 * The number of PHY clocks that the application programs in 2137 * this field is added to the high/full speed interpacket timeout 2138 * duration in the core to account for any additional delays 2139 * introduced by the PHY. This can be required, because the delay 2140 * introduced by the PHY in generating the linestate condition 2141 * can vary from one PHY to another. 2142 */ 2143 usbcfg = dwc2_readl(hsotg, GUSBCFG); 2144 usbcfg |= GUSBCFG_TOUTCAL(7); 2145 dwc2_writel(hsotg, usbcfg, GUSBCFG); 2146 2147 /* Restart the Phy Clock */ 2148 dwc2_writel(hsotg, 0, PCGCTL); 2149 2150 /* Initialize Host Configuration Register */ 2151 dwc2_init_fs_ls_pclk_sel(hsotg); 2152 if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || 2153 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) { 2154 hcfg = dwc2_readl(hsotg, HCFG); 2155 hcfg |= HCFG_FSLSSUPP; 2156 dwc2_writel(hsotg, hcfg, HCFG); 2157 } 2158 2159 /* 2160 * This bit allows dynamic reloading of the HFIR register during 2161 * runtime. This bit needs to be programmed during initial configuration 2162 * and its value must not be changed during runtime. 2163 */ 2164 if (hsotg->params.reload_ctl) { 2165 hfir = dwc2_readl(hsotg, HFIR); 2166 hfir |= HFIR_RLDCTRL; 2167 dwc2_writel(hsotg, hfir, HFIR); 2168 } 2169 2170 if (hsotg->params.dma_desc_enable) { 2171 u32 op_mode = hsotg->hw_params.op_mode; 2172 2173 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || 2174 !hsotg->hw_params.dma_desc_enable || 2175 op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || 2176 op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || 2177 op_mode == GHWCFG2_OP_MODE_UNDEFINED) { 2178 dev_err(hsotg->dev, 2179 "Hardware does not support descriptor DMA mode -\n"); 2180 dev_err(hsotg->dev, 2181 "falling back to buffer DMA mode.\n"); 2182 hsotg->params.dma_desc_enable = false; 2183 } else { 2184 hcfg = dwc2_readl(hsotg, HCFG); 2185 hcfg |= HCFG_DESCDMA; 2186 dwc2_writel(hsotg, hcfg, HCFG); 2187 } 2188 } 2189 2190 /* Configure data FIFO sizes */ 2191 dwc2_config_fifos(hsotg); 2192 2193 /* TODO - check this */ 2194 /* Clear Host Set HNP Enable in the OTG Control Register */ 2195 otgctl = dwc2_readl(hsotg, GOTGCTL); 2196 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2197 dwc2_writel(hsotg, otgctl, GOTGCTL); 2198 2199 /* Make sure the FIFOs are flushed */ 2200 dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); 2201 dwc2_flush_rx_fifo(hsotg); 2202 2203 /* Clear Host Set HNP Enable in the OTG Control Register */ 2204 otgctl = dwc2_readl(hsotg, GOTGCTL); 2205 otgctl &= ~GOTGCTL_HSTSETHNPEN; 2206 dwc2_writel(hsotg, otgctl, GOTGCTL); 2207 2208 if (!hsotg->params.dma_desc_enable) { 2209 int num_channels, i; 2210 u32 hcchar; 2211 2212 /* Flush out any leftover queued requests */ 2213 num_channels = hsotg->params.host_channels; 2214 for (i = 0; i < num_channels; i++) { 2215 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2216 if (hcchar & HCCHAR_CHENA) { 2217 hcchar &= ~HCCHAR_CHENA; 2218 hcchar |= HCCHAR_CHDIS; 2219 hcchar &= ~HCCHAR_EPDIR; 2220 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2221 } 2222 } 2223 2224 /* Halt all channels to put them into a known state */ 2225 for (i = 0; i < num_channels; i++) { 2226 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 2227 if (hcchar & HCCHAR_CHENA) { 2228 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; 2229 hcchar &= ~HCCHAR_EPDIR; 2230 dwc2_writel(hsotg, hcchar, HCCHAR(i)); 2231 dev_dbg(hsotg->dev, "%s: Halt channel %d\n", 2232 __func__, i); 2233 2234 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i), 2235 HCCHAR_CHENA, 2236 1000)) { 2237 dev_warn(hsotg->dev, 2238 "Unable to clear enable on channel %d\n", 2239 i); 2240 } 2241 } 2242 } 2243 } 2244 2245 /* Enable ACG feature in host mode, if supported */ 2246 dwc2_enable_acg(hsotg); 2247 2248 /* Turn on the vbus power */ 2249 dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); 2250 if (hsotg->op_state == OTG_STATE_A_HOST) { 2251 u32 hprt0 = dwc2_read_hprt0(hsotg); 2252 2253 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", 2254 !!(hprt0 & HPRT0_PWR)); 2255 if (!(hprt0 & HPRT0_PWR)) { 2256 hprt0 |= HPRT0_PWR; 2257 dwc2_writel(hsotg, hprt0, HPRT0); 2258 } 2259 } 2260 2261 dwc2_enable_host_interrupts(hsotg); 2262 } 2263 2264 /* 2265 * Initializes dynamic portions of the DWC_otg HCD state 2266 * 2267 * Must be called with interrupt disabled and spinlock held 2268 */ 2269 static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) 2270 { 2271 struct dwc2_host_chan *chan, *chan_tmp; 2272 int num_channels; 2273 int i; 2274 2275 hsotg->flags.d32 = 0; 2276 hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; 2277 2278 if (hsotg->params.uframe_sched) { 2279 hsotg->available_host_channels = 2280 hsotg->params.host_channels; 2281 } else { 2282 hsotg->non_periodic_channels = 0; 2283 hsotg->periodic_channels = 0; 2284 } 2285 2286 /* 2287 * Put all channels in the free channel list and clean up channel 2288 * states 2289 */ 2290 list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, 2291 hc_list_entry) 2292 list_del_init(&chan->hc_list_entry); 2293 2294 num_channels = hsotg->params.host_channels; 2295 for (i = 0; i < num_channels; i++) { 2296 chan = hsotg->hc_ptr_array[i]; 2297 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); 2298 dwc2_hc_cleanup(hsotg, chan); 2299 } 2300 2301 /* Initialize the DWC core for host mode operation */ 2302 dwc2_core_host_init(hsotg); 2303 } 2304 2305 static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, 2306 struct dwc2_host_chan *chan, 2307 struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) 2308 { 2309 int hub_addr, hub_port; 2310 2311 chan->do_split = 1; 2312 chan->xact_pos = qtd->isoc_split_pos; 2313 chan->complete_split = qtd->complete_split; 2314 dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); 2315 chan->hub_addr = (u8)hub_addr; 2316 chan->hub_port = (u8)hub_port; 2317 } 2318 2319 static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, 2320 struct dwc2_host_chan *chan, 2321 struct dwc2_qtd *qtd) 2322 { 2323 struct dwc2_hcd_urb *urb = qtd->urb; 2324 struct dwc2_hcd_iso_packet_desc *frame_desc; 2325 2326 switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { 2327 case USB_ENDPOINT_XFER_CONTROL: 2328 chan->ep_type = USB_ENDPOINT_XFER_CONTROL; 2329 2330 switch (qtd->control_phase) { 2331 case DWC2_CONTROL_SETUP: 2332 dev_vdbg(hsotg->dev, " Control setup transaction\n"); 2333 chan->do_ping = 0; 2334 chan->ep_is_in = 0; 2335 chan->data_pid_start = DWC2_HC_PID_SETUP; 2336 if (hsotg->params.host_dma) 2337 chan->xfer_dma = urb->setup_dma; 2338 else 2339 chan->xfer_buf = urb->setup_packet; 2340 chan->xfer_len = 8; 2341 break; 2342 2343 case DWC2_CONTROL_DATA: 2344 dev_vdbg(hsotg->dev, " Control data transaction\n"); 2345 chan->data_pid_start = qtd->data_toggle; 2346 break; 2347 2348 case DWC2_CONTROL_STATUS: 2349 /* 2350 * Direction is opposite of data direction or IN if no 2351 * data 2352 */ 2353 dev_vdbg(hsotg->dev, " Control status transaction\n"); 2354 if (urb->length == 0) 2355 chan->ep_is_in = 1; 2356 else 2357 chan->ep_is_in = 2358 dwc2_hcd_is_pipe_out(&urb->pipe_info); 2359 if (chan->ep_is_in) 2360 chan->do_ping = 0; 2361 chan->data_pid_start = DWC2_HC_PID_DATA1; 2362 chan->xfer_len = 0; 2363 if (hsotg->params.host_dma) 2364 chan->xfer_dma = hsotg->status_buf_dma; 2365 else 2366 chan->xfer_buf = hsotg->status_buf; 2367 break; 2368 } 2369 break; 2370 2371 case USB_ENDPOINT_XFER_BULK: 2372 chan->ep_type = USB_ENDPOINT_XFER_BULK; 2373 break; 2374 2375 case USB_ENDPOINT_XFER_INT: 2376 chan->ep_type = USB_ENDPOINT_XFER_INT; 2377 break; 2378 2379 case USB_ENDPOINT_XFER_ISOC: 2380 chan->ep_type = USB_ENDPOINT_XFER_ISOC; 2381 if (hsotg->params.dma_desc_enable) 2382 break; 2383 2384 frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; 2385 frame_desc->status = 0; 2386 2387 if (hsotg->params.host_dma) { 2388 chan->xfer_dma = urb->dma; 2389 chan->xfer_dma += frame_desc->offset + 2390 qtd->isoc_split_offset; 2391 } else { 2392 chan->xfer_buf = urb->buf; 2393 chan->xfer_buf += frame_desc->offset + 2394 qtd->isoc_split_offset; 2395 } 2396 2397 chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; 2398 2399 if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { 2400 if (chan->xfer_len <= 188) 2401 chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; 2402 else 2403 chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; 2404 } 2405 break; 2406 } 2407 } 2408 2409 static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, 2410 struct dwc2_qh *qh, 2411 struct dwc2_host_chan *chan) 2412 { 2413 if (!hsotg->unaligned_cache || 2414 chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) 2415 return -ENOMEM; 2416 2417 if (!qh->dw_align_buf) { 2418 qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, 2419 GFP_ATOMIC | GFP_DMA); 2420 if (!qh->dw_align_buf) 2421 return -ENOMEM; 2422 } 2423 2424 qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, 2425 DWC2_KMEM_UNALIGNED_BUF_SIZE, 2426 DMA_FROM_DEVICE); 2427 2428 if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { 2429 dev_err(hsotg->dev, "can't map align_buf\n"); 2430 chan->align_buf = 0; 2431 return -EINVAL; 2432 } 2433 2434 chan->align_buf = qh->dw_align_buf_dma; 2435 return 0; 2436 } 2437 2438 #define DWC2_USB_DMA_ALIGN 4 2439 2440 static void dwc2_free_dma_aligned_buffer(struct urb *urb) 2441 { 2442 void *stored_xfer_buffer; 2443 size_t length; 2444 2445 if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) 2446 return; 2447 2448 /* Restore urb->transfer_buffer from the end of the allocated area */ 2449 memcpy(&stored_xfer_buffer, 2450 PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length, 2451 dma_get_cache_alignment()), 2452 sizeof(urb->transfer_buffer)); 2453 2454 if (usb_urb_dir_in(urb)) { 2455 if (usb_pipeisoc(urb->pipe)) 2456 length = urb->transfer_buffer_length; 2457 else 2458 length = urb->actual_length; 2459 2460 memcpy(stored_xfer_buffer, urb->transfer_buffer, length); 2461 } 2462 kfree(urb->transfer_buffer); 2463 urb->transfer_buffer = stored_xfer_buffer; 2464 2465 urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; 2466 } 2467 2468 static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) 2469 { 2470 void *kmalloc_ptr; 2471 size_t kmalloc_size; 2472 2473 if (urb->num_sgs || urb->sg || 2474 urb->transfer_buffer_length == 0 || 2475 !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) 2476 return 0; 2477 2478 /* 2479 * Allocate a buffer with enough padding for original transfer_buffer 2480 * pointer. This allocation is guaranteed to be aligned properly for 2481 * DMA 2482 */ 2483 kmalloc_size = urb->transfer_buffer_length + 2484 (dma_get_cache_alignment() - 1) + 2485 sizeof(urb->transfer_buffer); 2486 2487 kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); 2488 if (!kmalloc_ptr) 2489 return -ENOMEM; 2490 2491 /* 2492 * Position value of original urb->transfer_buffer pointer to the end 2493 * of allocation for later referencing 2494 */ 2495 memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length, 2496 dma_get_cache_alignment()), 2497 &urb->transfer_buffer, sizeof(urb->transfer_buffer)); 2498 2499 if (usb_urb_dir_out(urb)) 2500 memcpy(kmalloc_ptr, urb->transfer_buffer, 2501 urb->transfer_buffer_length); 2502 urb->transfer_buffer = kmalloc_ptr; 2503 2504 urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; 2505 2506 return 0; 2507 } 2508 2509 static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, 2510 gfp_t mem_flags) 2511 { 2512 int ret; 2513 2514 /* We assume setup_dma is always aligned; warn if not */ 2515 WARN_ON_ONCE(urb->setup_dma && 2516 (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1))); 2517 2518 ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags); 2519 if (ret) 2520 return ret; 2521 2522 ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); 2523 if (ret) 2524 dwc2_free_dma_aligned_buffer(urb); 2525 2526 return ret; 2527 } 2528 2529 static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) 2530 { 2531 usb_hcd_unmap_urb_for_dma(hcd, urb); 2532 dwc2_free_dma_aligned_buffer(urb); 2533 } 2534 2535 /** 2536 * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host 2537 * channel and initializes the host channel to perform the transactions. The 2538 * host channel is removed from the free list. 2539 * 2540 * @hsotg: The HCD state structure 2541 * @qh: Transactions from the first QTD for this QH are selected and assigned 2542 * to a free host channel 2543 */ 2544 static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) 2545 { 2546 struct dwc2_host_chan *chan; 2547 struct dwc2_hcd_urb *urb; 2548 struct dwc2_qtd *qtd; 2549 2550 if (dbg_qh(qh)) 2551 dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); 2552 2553 if (list_empty(&qh->qtd_list)) { 2554 dev_dbg(hsotg->dev, "No QTDs in QH list\n"); 2555 return -ENOMEM; 2556 } 2557 2558 if (list_empty(&hsotg->free_hc_list)) { 2559 dev_dbg(hsotg->dev, "No free channel to assign\n"); 2560 return -ENOMEM; 2561 } 2562 2563 chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, 2564 hc_list_entry); 2565 2566 /* Remove host channel from free list */ 2567 list_del_init(&chan->hc_list_entry); 2568 2569 qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); 2570 urb = qtd->urb; 2571 qh->channel = chan; 2572 qtd->in_process = 1; 2573 2574 /* 2575 * Use usb_pipedevice to determine device address. This address is 2576 * 0 before the SET_ADDRESS command and the correct address afterward. 2577 */ 2578 chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); 2579 chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); 2580 chan->speed = qh->dev_speed; 2581 chan->max_packet = qh->maxp; 2582 2583 chan->xfer_started = 0; 2584 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; 2585 chan->error_state = (qtd->error_count > 0); 2586 chan->halt_on_queue = 0; 2587 chan->halt_pending = 0; 2588 chan->requests = 0; 2589 2590 /* 2591 * The following values may be modified in the transfer type section 2592 * below. The xfer_len value may be reduced when the transfer is 2593 * started to accommodate the max widths of the XferSize and PktCnt 2594 * fields in the HCTSIZn register. 2595 */ 2596 2597 chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); 2598 if (chan->ep_is_in) 2599 chan->do_ping = 0; 2600 else 2601 chan->do_ping = qh->ping_state; 2602 2603 chan->data_pid_start = qh->data_toggle; 2604 chan->multi_count = 1; 2605 2606 if (urb->actual_length > urb->length && 2607 !dwc2_hcd_is_pipe_in(&urb->pipe_info)) 2608 urb->actual_length = urb->length; 2609 2610 if (hsotg->params.host_dma) 2611 chan->xfer_dma = urb->dma + urb->actual_length; 2612 else 2613 chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; 2614 2615 chan->xfer_len = urb->length - urb->actual_length; 2616 chan->xfer_count = 0; 2617 2618 /* Set the split attributes if required */ 2619 if (qh->do_split) 2620 dwc2_hc_init_split(hsotg, chan, qtd, urb); 2621 else 2622 chan->do_split = 0; 2623 2624 /* Set the transfer attributes */ 2625 dwc2_hc_init_xfer(hsotg, chan, qtd); 2626 2627 /* For non-dword aligned buffers */ 2628 if (hsotg->params.host_dma && qh->do_split && 2629 chan->ep_is_in && (chan->xfer_dma & 0x3)) { 2630 dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); 2631 if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { 2632 dev_err(hsotg->dev, 2633 "Failed to allocate memory to handle non-aligned buffer\n"); 2634 /* Add channel back to free list */ 2635 chan->align_buf = 0; 2636 chan->multi_count = 0; 2637 list_add_tail(&chan->hc_list_entry, 2638 &hsotg->free_hc_list); 2639 qtd->in_process = 0; 2640 qh->channel = NULL; 2641 return -ENOMEM; 2642 } 2643 } else { 2644 /* 2645 * We assume that DMA is always aligned in non-split 2646 * case or split out case. Warn if not. 2647 */ 2648 WARN_ON_ONCE(hsotg->params.host_dma && 2649 (chan->xfer_dma & 0x3)); 2650 chan->align_buf = 0; 2651 } 2652 2653 if (chan->ep_type == USB_ENDPOINT_XFER_INT || 2654 chan->ep_type == USB_ENDPOINT_XFER_ISOC) 2655 /* 2656 * This value may be modified when the transfer is started 2657 * to reflect the actual transfer length 2658 */ 2659 chan->multi_count = qh->maxp_mult; 2660 2661 if (hsotg->params.dma_desc_enable) { 2662 chan->desc_list_addr = qh->desc_list_dma; 2663 chan->desc_list_sz = qh->desc_list_sz; 2664 } 2665 2666 dwc2_hc_init(hsotg, chan); 2667 chan->qh = qh; 2668 2669 return 0; 2670 } 2671 2672 /** 2673 * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer 2674 * schedule and assigns them to available host channels. Called from the HCD 2675 * interrupt handler functions. 2676 * 2677 * @hsotg: The HCD state structure 2678 * 2679 * Return: The types of new transactions that were assigned to host channels 2680 */ 2681 enum dwc2_transaction_type dwc2_hcd_select_transactions( 2682 struct dwc2_hsotg *hsotg) 2683 { 2684 enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; 2685 struct list_head *qh_ptr; 2686 struct dwc2_qh *qh; 2687 int num_channels; 2688 2689 #ifdef DWC2_DEBUG_SOF 2690 dev_vdbg(hsotg->dev, " Select Transactions\n"); 2691 #endif 2692 2693 /* Process entries in the periodic ready list */ 2694 qh_ptr = hsotg->periodic_sched_ready.next; 2695 while (qh_ptr != &hsotg->periodic_sched_ready) { 2696 if (list_empty(&hsotg->free_hc_list)) 2697 break; 2698 if (hsotg->params.uframe_sched) { 2699 if (hsotg->available_host_channels <= 1) 2700 break; 2701 hsotg->available_host_channels--; 2702 } 2703 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2704 if (dwc2_assign_and_init_hc(hsotg, qh)) { 2705 if (hsotg->params.uframe_sched) 2706 hsotg->available_host_channels++; 2707 break; 2708 } 2709 2710 /* 2711 * Move the QH from the periodic ready schedule to the 2712 * periodic assigned schedule 2713 */ 2714 qh_ptr = qh_ptr->next; 2715 list_move_tail(&qh->qh_list_entry, 2716 &hsotg->periodic_sched_assigned); 2717 ret_val = DWC2_TRANSACTION_PERIODIC; 2718 } 2719 2720 /* 2721 * Process entries in the inactive portion of the non-periodic 2722 * schedule. Some free host channels may not be used if they are 2723 * reserved for periodic transfers. 2724 */ 2725 num_channels = hsotg->params.host_channels; 2726 qh_ptr = hsotg->non_periodic_sched_inactive.next; 2727 while (qh_ptr != &hsotg->non_periodic_sched_inactive) { 2728 if (!hsotg->params.uframe_sched && 2729 hsotg->non_periodic_channels >= num_channels - 2730 hsotg->periodic_channels) 2731 break; 2732 if (list_empty(&hsotg->free_hc_list)) 2733 break; 2734 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2735 if (hsotg->params.uframe_sched) { 2736 if (hsotg->available_host_channels < 1) 2737 break; 2738 hsotg->available_host_channels--; 2739 } 2740 2741 if (dwc2_assign_and_init_hc(hsotg, qh)) { 2742 if (hsotg->params.uframe_sched) 2743 hsotg->available_host_channels++; 2744 break; 2745 } 2746 2747 /* 2748 * Move the QH from the non-periodic inactive schedule to the 2749 * non-periodic active schedule 2750 */ 2751 qh_ptr = qh_ptr->next; 2752 list_move_tail(&qh->qh_list_entry, 2753 &hsotg->non_periodic_sched_active); 2754 2755 if (ret_val == DWC2_TRANSACTION_NONE) 2756 ret_val = DWC2_TRANSACTION_NON_PERIODIC; 2757 else 2758 ret_val = DWC2_TRANSACTION_ALL; 2759 2760 if (!hsotg->params.uframe_sched) 2761 hsotg->non_periodic_channels++; 2762 } 2763 2764 return ret_val; 2765 } 2766 2767 /** 2768 * dwc2_queue_transaction() - Attempts to queue a single transaction request for 2769 * a host channel associated with either a periodic or non-periodic transfer 2770 * 2771 * @hsotg: The HCD state structure 2772 * @chan: Host channel descriptor associated with either a periodic or 2773 * non-periodic transfer 2774 * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO 2775 * for periodic transfers or the non-periodic Tx FIFO 2776 * for non-periodic transfers 2777 * 2778 * Return: 1 if a request is queued and more requests may be needed to 2779 * complete the transfer, 0 if no more requests are required for this 2780 * transfer, -1 if there is insufficient space in the Tx FIFO 2781 * 2782 * This function assumes that there is space available in the appropriate 2783 * request queue. For an OUT transfer or SETUP transaction in Slave mode, 2784 * it checks whether space is available in the appropriate Tx FIFO. 2785 * 2786 * Must be called with interrupt disabled and spinlock held 2787 */ 2788 static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, 2789 struct dwc2_host_chan *chan, 2790 u16 fifo_dwords_avail) 2791 { 2792 int retval = 0; 2793 2794 if (chan->do_split) 2795 /* Put ourselves on the list to keep order straight */ 2796 list_move_tail(&chan->split_order_list_entry, 2797 &hsotg->split_order); 2798 2799 if (hsotg->params.host_dma && chan->qh) { 2800 if (hsotg->params.dma_desc_enable) { 2801 if (!chan->xfer_started || 2802 chan->ep_type == USB_ENDPOINT_XFER_ISOC) { 2803 dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); 2804 chan->qh->ping_state = 0; 2805 } 2806 } else if (!chan->xfer_started) { 2807 dwc2_hc_start_transfer(hsotg, chan); 2808 chan->qh->ping_state = 0; 2809 } 2810 } else if (chan->halt_pending) { 2811 /* Don't queue a request if the channel has been halted */ 2812 } else if (chan->halt_on_queue) { 2813 dwc2_hc_halt(hsotg, chan, chan->halt_status); 2814 } else if (chan->do_ping) { 2815 if (!chan->xfer_started) 2816 dwc2_hc_start_transfer(hsotg, chan); 2817 } else if (!chan->ep_is_in || 2818 chan->data_pid_start == DWC2_HC_PID_SETUP) { 2819 if ((fifo_dwords_avail * 4) >= chan->max_packet) { 2820 if (!chan->xfer_started) { 2821 dwc2_hc_start_transfer(hsotg, chan); 2822 retval = 1; 2823 } else { 2824 retval = dwc2_hc_continue_transfer(hsotg, chan); 2825 } 2826 } else { 2827 retval = -1; 2828 } 2829 } else { 2830 if (!chan->xfer_started) { 2831 dwc2_hc_start_transfer(hsotg, chan); 2832 retval = 1; 2833 } else { 2834 retval = dwc2_hc_continue_transfer(hsotg, chan); 2835 } 2836 } 2837 2838 return retval; 2839 } 2840 2841 /* 2842 * Processes periodic channels for the next frame and queues transactions for 2843 * these channels to the DWC_otg controller. After queueing transactions, the 2844 * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions 2845 * to queue as Periodic Tx FIFO or request queue space becomes available. 2846 * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. 2847 * 2848 * Must be called with interrupt disabled and spinlock held 2849 */ 2850 static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) 2851 { 2852 struct list_head *qh_ptr; 2853 struct dwc2_qh *qh; 2854 u32 tx_status; 2855 u32 fspcavail; 2856 u32 gintmsk; 2857 int status; 2858 bool no_queue_space = false; 2859 bool no_fifo_space = false; 2860 u32 qspcavail; 2861 2862 /* If empty list then just adjust interrupt enables */ 2863 if (list_empty(&hsotg->periodic_sched_assigned)) 2864 goto exit; 2865 2866 if (dbg_perio()) 2867 dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); 2868 2869 tx_status = dwc2_readl(hsotg, HPTXSTS); 2870 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2871 TXSTS_QSPCAVAIL_SHIFT; 2872 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2873 TXSTS_FSPCAVAIL_SHIFT; 2874 2875 if (dbg_perio()) { 2876 dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", 2877 qspcavail); 2878 dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", 2879 fspcavail); 2880 } 2881 2882 qh_ptr = hsotg->periodic_sched_assigned.next; 2883 while (qh_ptr != &hsotg->periodic_sched_assigned) { 2884 tx_status = dwc2_readl(hsotg, HPTXSTS); 2885 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 2886 TXSTS_QSPCAVAIL_SHIFT; 2887 if (qspcavail == 0) { 2888 no_queue_space = true; 2889 break; 2890 } 2891 2892 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); 2893 if (!qh->channel) { 2894 qh_ptr = qh_ptr->next; 2895 continue; 2896 } 2897 2898 /* Make sure EP's TT buffer is clean before queueing qtds */ 2899 if (qh->tt_buffer_dirty) { 2900 qh_ptr = qh_ptr->next; 2901 continue; 2902 } 2903 2904 /* 2905 * Set a flag if we're queuing high-bandwidth in slave mode. 2906 * The flag prevents any halts to get into the request queue in 2907 * the middle of multiple high-bandwidth packets getting queued. 2908 */ 2909 if (!hsotg->params.host_dma && 2910 qh->channel->multi_count > 1) 2911 hsotg->queuing_high_bandwidth = 1; 2912 2913 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 2914 TXSTS_FSPCAVAIL_SHIFT; 2915 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 2916 if (status < 0) { 2917 no_fifo_space = true; 2918 break; 2919 } 2920 2921 /* 2922 * In Slave mode, stay on the current transfer until there is 2923 * nothing more to do or the high-bandwidth request count is 2924 * reached. In DMA mode, only need to queue one request. The 2925 * controller automatically handles multiple packets for 2926 * high-bandwidth transfers. 2927 */ 2928 if (hsotg->params.host_dma || status == 0 || 2929 qh->channel->requests == qh->channel->multi_count) { 2930 qh_ptr = qh_ptr->next; 2931 /* 2932 * Move the QH from the periodic assigned schedule to 2933 * the periodic queued schedule 2934 */ 2935 list_move_tail(&qh->qh_list_entry, 2936 &hsotg->periodic_sched_queued); 2937 2938 /* done queuing high bandwidth */ 2939 hsotg->queuing_high_bandwidth = 0; 2940 } 2941 } 2942 2943 exit: 2944 if (no_queue_space || no_fifo_space || 2945 (!hsotg->params.host_dma && 2946 !list_empty(&hsotg->periodic_sched_assigned))) { 2947 /* 2948 * May need to queue more transactions as the request 2949 * queue or Tx FIFO empties. Enable the periodic Tx 2950 * FIFO empty interrupt. (Always use the half-empty 2951 * level to ensure that new requests are loaded as 2952 * soon as possible.) 2953 */ 2954 gintmsk = dwc2_readl(hsotg, GINTMSK); 2955 if (!(gintmsk & GINTSTS_PTXFEMP)) { 2956 gintmsk |= GINTSTS_PTXFEMP; 2957 dwc2_writel(hsotg, gintmsk, GINTMSK); 2958 } 2959 } else { 2960 /* 2961 * Disable the Tx FIFO empty interrupt since there are 2962 * no more transactions that need to be queued right 2963 * now. This function is called from interrupt 2964 * handlers to queue more transactions as transfer 2965 * states change. 2966 */ 2967 gintmsk = dwc2_readl(hsotg, GINTMSK); 2968 if (gintmsk & GINTSTS_PTXFEMP) { 2969 gintmsk &= ~GINTSTS_PTXFEMP; 2970 dwc2_writel(hsotg, gintmsk, GINTMSK); 2971 } 2972 } 2973 } 2974 2975 /* 2976 * Processes active non-periodic channels and queues transactions for these 2977 * channels to the DWC_otg controller. After queueing transactions, the NP Tx 2978 * FIFO Empty interrupt is enabled if there are more transactions to queue as 2979 * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx 2980 * FIFO Empty interrupt is disabled. 2981 * 2982 * Must be called with interrupt disabled and spinlock held 2983 */ 2984 static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) 2985 { 2986 struct list_head *orig_qh_ptr; 2987 struct dwc2_qh *qh; 2988 u32 tx_status; 2989 u32 qspcavail; 2990 u32 fspcavail; 2991 u32 gintmsk; 2992 int status; 2993 int no_queue_space = 0; 2994 int no_fifo_space = 0; 2995 int more_to_do = 0; 2996 2997 dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); 2998 2999 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3000 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3001 TXSTS_QSPCAVAIL_SHIFT; 3002 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3003 TXSTS_FSPCAVAIL_SHIFT; 3004 dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", 3005 qspcavail); 3006 dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", 3007 fspcavail); 3008 3009 /* 3010 * Keep track of the starting point. Skip over the start-of-list 3011 * entry. 3012 */ 3013 if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) 3014 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3015 orig_qh_ptr = hsotg->non_periodic_qh_ptr; 3016 3017 /* 3018 * Process once through the active list or until no more space is 3019 * available in the request queue or the Tx FIFO 3020 */ 3021 do { 3022 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3023 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3024 TXSTS_QSPCAVAIL_SHIFT; 3025 if (!hsotg->params.host_dma && qspcavail == 0) { 3026 no_queue_space = 1; 3027 break; 3028 } 3029 3030 qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, 3031 qh_list_entry); 3032 if (!qh->channel) 3033 goto next; 3034 3035 /* Make sure EP's TT buffer is clean before queueing qtds */ 3036 if (qh->tt_buffer_dirty) 3037 goto next; 3038 3039 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3040 TXSTS_FSPCAVAIL_SHIFT; 3041 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); 3042 3043 if (status > 0) { 3044 more_to_do = 1; 3045 } else if (status < 0) { 3046 no_fifo_space = 1; 3047 break; 3048 } 3049 next: 3050 /* Advance to next QH, skipping start-of-list entry */ 3051 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; 3052 if (hsotg->non_periodic_qh_ptr == 3053 &hsotg->non_periodic_sched_active) 3054 hsotg->non_periodic_qh_ptr = 3055 hsotg->non_periodic_qh_ptr->next; 3056 } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); 3057 3058 if (!hsotg->params.host_dma) { 3059 tx_status = dwc2_readl(hsotg, GNPTXSTS); 3060 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> 3061 TXSTS_QSPCAVAIL_SHIFT; 3062 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> 3063 TXSTS_FSPCAVAIL_SHIFT; 3064 dev_vdbg(hsotg->dev, 3065 " NP Tx Req Queue Space Avail (after queue): %d\n", 3066 qspcavail); 3067 dev_vdbg(hsotg->dev, 3068 " NP Tx FIFO Space Avail (after queue): %d\n", 3069 fspcavail); 3070 3071 if (more_to_do || no_queue_space || no_fifo_space) { 3072 /* 3073 * May need to queue more transactions as the request 3074 * queue or Tx FIFO empties. Enable the non-periodic 3075 * Tx FIFO empty interrupt. (Always use the half-empty 3076 * level to ensure that new requests are loaded as 3077 * soon as possible.) 3078 */ 3079 gintmsk = dwc2_readl(hsotg, GINTMSK); 3080 gintmsk |= GINTSTS_NPTXFEMP; 3081 dwc2_writel(hsotg, gintmsk, GINTMSK); 3082 } else { 3083 /* 3084 * Disable the Tx FIFO empty interrupt since there are 3085 * no more transactions that need to be queued right 3086 * now. This function is called from interrupt 3087 * handlers to queue more transactions as transfer 3088 * states change. 3089 */ 3090 gintmsk = dwc2_readl(hsotg, GINTMSK); 3091 gintmsk &= ~GINTSTS_NPTXFEMP; 3092 dwc2_writel(hsotg, gintmsk, GINTMSK); 3093 } 3094 } 3095 } 3096 3097 /** 3098 * dwc2_hcd_queue_transactions() - Processes the currently active host channels 3099 * and queues transactions for these channels to the DWC_otg controller. Called 3100 * from the HCD interrupt handler functions. 3101 * 3102 * @hsotg: The HCD state structure 3103 * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, 3104 * or both) 3105 * 3106 * Must be called with interrupt disabled and spinlock held 3107 */ 3108 void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, 3109 enum dwc2_transaction_type tr_type) 3110 { 3111 #ifdef DWC2_DEBUG_SOF 3112 dev_vdbg(hsotg->dev, "Queue Transactions\n"); 3113 #endif 3114 /* Process host channels associated with periodic transfers */ 3115 if (tr_type == DWC2_TRANSACTION_PERIODIC || 3116 tr_type == DWC2_TRANSACTION_ALL) 3117 dwc2_process_periodic_channels(hsotg); 3118 3119 /* Process host channels associated with non-periodic transfers */ 3120 if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || 3121 tr_type == DWC2_TRANSACTION_ALL) { 3122 if (!list_empty(&hsotg->non_periodic_sched_active)) { 3123 dwc2_process_non_periodic_channels(hsotg); 3124 } else { 3125 /* 3126 * Ensure NP Tx FIFO empty interrupt is disabled when 3127 * there are no non-periodic transfers to process 3128 */ 3129 u32 gintmsk = dwc2_readl(hsotg, GINTMSK); 3130 3131 gintmsk &= ~GINTSTS_NPTXFEMP; 3132 dwc2_writel(hsotg, gintmsk, GINTMSK); 3133 } 3134 } 3135 } 3136 3137 static void dwc2_conn_id_status_change(struct work_struct *work) 3138 { 3139 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 3140 wf_otg); 3141 u32 count = 0; 3142 u32 gotgctl; 3143 unsigned long flags; 3144 3145 dev_dbg(hsotg->dev, "%s()\n", __func__); 3146 3147 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3148 dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); 3149 dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", 3150 !!(gotgctl & GOTGCTL_CONID_B)); 3151 3152 /* B-Device connector (Device Mode) */ 3153 if (gotgctl & GOTGCTL_CONID_B) { 3154 dwc2_vbus_supply_exit(hsotg); 3155 /* Wait for switch to device mode */ 3156 dev_dbg(hsotg->dev, "connId B\n"); 3157 if (hsotg->bus_suspended) { 3158 dev_info(hsotg->dev, 3159 "Do port resume before switching to device mode\n"); 3160 dwc2_port_resume(hsotg); 3161 } 3162 while (!dwc2_is_device_mode(hsotg)) { 3163 dev_info(hsotg->dev, 3164 "Waiting for Peripheral Mode, Mode=%s\n", 3165 dwc2_is_host_mode(hsotg) ? "Host" : 3166 "Peripheral"); 3167 msleep(20); 3168 /* 3169 * Sometimes the initial GOTGCTRL read is wrong, so 3170 * check it again and jump to host mode if that was 3171 * the case. 3172 */ 3173 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3174 if (!(gotgctl & GOTGCTL_CONID_B)) 3175 goto host; 3176 if (++count > 250) 3177 break; 3178 } 3179 if (count > 250) 3180 dev_err(hsotg->dev, 3181 "Connection id status change timed out\n"); 3182 3183 /* 3184 * Exit Partial Power Down without restoring registers. 3185 * No need to check the return value as registers 3186 * are not being restored. 3187 */ 3188 if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2) 3189 dwc2_exit_partial_power_down(hsotg, 0, false); 3190 3191 hsotg->op_state = OTG_STATE_B_PERIPHERAL; 3192 dwc2_core_init(hsotg, false); 3193 dwc2_enable_global_interrupts(hsotg); 3194 spin_lock_irqsave(&hsotg->lock, flags); 3195 dwc2_hsotg_core_init_disconnected(hsotg, false); 3196 spin_unlock_irqrestore(&hsotg->lock, flags); 3197 /* Enable ACG feature in device mode,if supported */ 3198 dwc2_enable_acg(hsotg); 3199 dwc2_hsotg_core_connect(hsotg); 3200 } else { 3201 host: 3202 /* A-Device connector (Host Mode) */ 3203 dev_dbg(hsotg->dev, "connId A\n"); 3204 while (!dwc2_is_host_mode(hsotg)) { 3205 dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", 3206 dwc2_is_host_mode(hsotg) ? 3207 "Host" : "Peripheral"); 3208 msleep(20); 3209 if (++count > 250) 3210 break; 3211 } 3212 if (count > 250) 3213 dev_err(hsotg->dev, 3214 "Connection id status change timed out\n"); 3215 3216 spin_lock_irqsave(&hsotg->lock, flags); 3217 dwc2_hsotg_disconnect(hsotg); 3218 spin_unlock_irqrestore(&hsotg->lock, flags); 3219 3220 hsotg->op_state = OTG_STATE_A_HOST; 3221 /* Initialize the Core for Host mode */ 3222 dwc2_core_init(hsotg, false); 3223 dwc2_enable_global_interrupts(hsotg); 3224 dwc2_hcd_start(hsotg); 3225 } 3226 } 3227 3228 static void dwc2_wakeup_detected(struct timer_list *t) 3229 { 3230 struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer); 3231 u32 hprt0; 3232 3233 dev_dbg(hsotg->dev, "%s()\n", __func__); 3234 3235 /* 3236 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms 3237 * so that OPT tests pass with all PHYs.) 3238 */ 3239 hprt0 = dwc2_read_hprt0(hsotg); 3240 dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); 3241 hprt0 &= ~HPRT0_RES; 3242 dwc2_writel(hsotg, hprt0, HPRT0); 3243 dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", 3244 dwc2_readl(hsotg, HPRT0)); 3245 3246 dwc2_hcd_rem_wakeup(hsotg); 3247 hsotg->bus_suspended = false; 3248 3249 /* Change to L0 state */ 3250 hsotg->lx_state = DWC2_L0; 3251 } 3252 3253 static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) 3254 { 3255 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); 3256 3257 return hcd->self.b_hnp_enable; 3258 } 3259 3260 /** 3261 * dwc2_port_suspend() - Put controller in suspend mode for host. 3262 * 3263 * @hsotg: Programming view of the DWC_otg controller 3264 * @windex: The control request wIndex field 3265 * 3266 * Return: non-zero if failed to enter suspend mode for host. 3267 * 3268 * This function is for entering Host mode suspend. 3269 * Must NOT be called with interrupt disabled or spinlock held. 3270 */ 3271 int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) 3272 { 3273 unsigned long flags; 3274 u32 pcgctl; 3275 u32 gotgctl; 3276 int ret = 0; 3277 3278 dev_dbg(hsotg->dev, "%s()\n", __func__); 3279 3280 spin_lock_irqsave(&hsotg->lock, flags); 3281 3282 if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { 3283 gotgctl = dwc2_readl(hsotg, GOTGCTL); 3284 gotgctl |= GOTGCTL_HSTSETHNPEN; 3285 dwc2_writel(hsotg, gotgctl, GOTGCTL); 3286 hsotg->op_state = OTG_STATE_A_SUSPEND; 3287 } 3288 3289 switch (hsotg->params.power_down) { 3290 case DWC2_POWER_DOWN_PARAM_PARTIAL: 3291 ret = dwc2_enter_partial_power_down(hsotg); 3292 if (ret) 3293 dev_err(hsotg->dev, 3294 "enter partial_power_down failed.\n"); 3295 break; 3296 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 3297 /* 3298 * Perform spin unlock and lock because in 3299 * "dwc2_host_enter_hibernation()" function there is a spinlock 3300 * logic which prevents servicing of any IRQ during entering 3301 * hibernation. 3302 */ 3303 spin_unlock_irqrestore(&hsotg->lock, flags); 3304 ret = dwc2_enter_hibernation(hsotg, 1); 3305 if (ret) 3306 dev_err(hsotg->dev, "enter hibernation failed.\n"); 3307 spin_lock_irqsave(&hsotg->lock, flags); 3308 break; 3309 case DWC2_POWER_DOWN_PARAM_NONE: 3310 /* 3311 * If not hibernation nor partial power down are supported, 3312 * clock gating is used to save power. 3313 */ 3314 if (!hsotg->params.no_clock_gating) 3315 dwc2_host_enter_clock_gating(hsotg); 3316 break; 3317 } 3318 3319 /* For HNP the bus must be suspended for at least 200ms */ 3320 if (dwc2_host_is_b_hnp_enabled(hsotg)) { 3321 pcgctl = dwc2_readl(hsotg, PCGCTL); 3322 pcgctl &= ~PCGCTL_STOPPCLK; 3323 dwc2_writel(hsotg, pcgctl, PCGCTL); 3324 3325 spin_unlock_irqrestore(&hsotg->lock, flags); 3326 3327 msleep(200); 3328 } else { 3329 spin_unlock_irqrestore(&hsotg->lock, flags); 3330 } 3331 3332 return ret; 3333 } 3334 3335 /** 3336 * dwc2_port_resume() - Exit controller from suspend mode for host. 3337 * 3338 * @hsotg: Programming view of the DWC_otg controller 3339 * 3340 * Return: non-zero if failed to exit suspend mode for host. 3341 * 3342 * This function is for exiting Host mode suspend. 3343 * Must NOT be called with interrupt disabled or spinlock held. 3344 */ 3345 int dwc2_port_resume(struct dwc2_hsotg *hsotg) 3346 { 3347 unsigned long flags; 3348 int ret = 0; 3349 3350 spin_lock_irqsave(&hsotg->lock, flags); 3351 3352 switch (hsotg->params.power_down) { 3353 case DWC2_POWER_DOWN_PARAM_PARTIAL: 3354 ret = dwc2_exit_partial_power_down(hsotg, 0, true); 3355 if (ret) 3356 dev_err(hsotg->dev, 3357 "exit partial_power_down failed.\n"); 3358 break; 3359 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 3360 /* Exit host hibernation. */ 3361 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); 3362 if (ret) 3363 dev_err(hsotg->dev, "exit hibernation failed.\n"); 3364 break; 3365 case DWC2_POWER_DOWN_PARAM_NONE: 3366 /* 3367 * If not hibernation nor partial power down are supported, 3368 * port resume is done using the clock gating programming flow. 3369 */ 3370 spin_unlock_irqrestore(&hsotg->lock, flags); 3371 dwc2_host_exit_clock_gating(hsotg, 0); 3372 spin_lock_irqsave(&hsotg->lock, flags); 3373 break; 3374 } 3375 3376 spin_unlock_irqrestore(&hsotg->lock, flags); 3377 3378 return ret; 3379 } 3380 3381 /* Handles hub class-specific requests */ 3382 static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, 3383 u16 wvalue, u16 windex, char *buf, u16 wlength) 3384 { 3385 struct usb_hub_descriptor *hub_desc; 3386 int retval = 0; 3387 u32 hprt0; 3388 u32 port_status; 3389 u32 speed; 3390 u32 pcgctl; 3391 u32 pwr; 3392 3393 switch (typereq) { 3394 case ClearHubFeature: 3395 dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); 3396 3397 switch (wvalue) { 3398 case C_HUB_LOCAL_POWER: 3399 case C_HUB_OVER_CURRENT: 3400 /* Nothing required here */ 3401 break; 3402 3403 default: 3404 retval = -EINVAL; 3405 dev_err(hsotg->dev, 3406 "ClearHubFeature request %1xh unknown\n", 3407 wvalue); 3408 } 3409 break; 3410 3411 case ClearPortFeature: 3412 if (wvalue != USB_PORT_FEAT_L1) 3413 if (!windex || windex > 1) 3414 goto error; 3415 switch (wvalue) { 3416 case USB_PORT_FEAT_ENABLE: 3417 dev_dbg(hsotg->dev, 3418 "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); 3419 hprt0 = dwc2_read_hprt0(hsotg); 3420 hprt0 |= HPRT0_ENA; 3421 dwc2_writel(hsotg, hprt0, HPRT0); 3422 break; 3423 3424 case USB_PORT_FEAT_SUSPEND: 3425 dev_dbg(hsotg->dev, 3426 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); 3427 3428 if (hsotg->bus_suspended) 3429 retval = dwc2_port_resume(hsotg); 3430 break; 3431 3432 case USB_PORT_FEAT_POWER: 3433 dev_dbg(hsotg->dev, 3434 "ClearPortFeature USB_PORT_FEAT_POWER\n"); 3435 hprt0 = dwc2_read_hprt0(hsotg); 3436 pwr = hprt0 & HPRT0_PWR; 3437 hprt0 &= ~HPRT0_PWR; 3438 dwc2_writel(hsotg, hprt0, HPRT0); 3439 if (pwr) 3440 dwc2_vbus_supply_exit(hsotg); 3441 break; 3442 3443 case USB_PORT_FEAT_INDICATOR: 3444 dev_dbg(hsotg->dev, 3445 "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); 3446 /* Port indicator not supported */ 3447 break; 3448 3449 case USB_PORT_FEAT_C_CONNECTION: 3450 /* 3451 * Clears driver's internal Connect Status Change flag 3452 */ 3453 dev_dbg(hsotg->dev, 3454 "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); 3455 hsotg->flags.b.port_connect_status_change = 0; 3456 break; 3457 3458 case USB_PORT_FEAT_C_RESET: 3459 /* Clears driver's internal Port Reset Change flag */ 3460 dev_dbg(hsotg->dev, 3461 "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); 3462 hsotg->flags.b.port_reset_change = 0; 3463 break; 3464 3465 case USB_PORT_FEAT_C_ENABLE: 3466 /* 3467 * Clears the driver's internal Port Enable/Disable 3468 * Change flag 3469 */ 3470 dev_dbg(hsotg->dev, 3471 "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); 3472 hsotg->flags.b.port_enable_change = 0; 3473 break; 3474 3475 case USB_PORT_FEAT_C_SUSPEND: 3476 /* 3477 * Clears the driver's internal Port Suspend Change 3478 * flag, which is set when resume signaling on the host 3479 * port is complete 3480 */ 3481 dev_dbg(hsotg->dev, 3482 "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); 3483 hsotg->flags.b.port_suspend_change = 0; 3484 break; 3485 3486 case USB_PORT_FEAT_C_PORT_L1: 3487 dev_dbg(hsotg->dev, 3488 "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); 3489 hsotg->flags.b.port_l1_change = 0; 3490 break; 3491 3492 case USB_PORT_FEAT_C_OVER_CURRENT: 3493 dev_dbg(hsotg->dev, 3494 "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); 3495 hsotg->flags.b.port_over_current_change = 0; 3496 break; 3497 3498 default: 3499 retval = -EINVAL; 3500 dev_err(hsotg->dev, 3501 "ClearPortFeature request %1xh unknown or unsupported\n", 3502 wvalue); 3503 } 3504 break; 3505 3506 case GetHubDescriptor: 3507 dev_dbg(hsotg->dev, "GetHubDescriptor\n"); 3508 hub_desc = (struct usb_hub_descriptor *)buf; 3509 hub_desc->bDescLength = 9; 3510 hub_desc->bDescriptorType = USB_DT_HUB; 3511 hub_desc->bNbrPorts = 1; 3512 hub_desc->wHubCharacteristics = 3513 cpu_to_le16(HUB_CHAR_COMMON_LPSM | 3514 HUB_CHAR_INDV_PORT_OCPM); 3515 hub_desc->bPwrOn2PwrGood = 1; 3516 hub_desc->bHubContrCurrent = 0; 3517 hub_desc->u.hs.DeviceRemovable[0] = 0; 3518 hub_desc->u.hs.DeviceRemovable[1] = 0xff; 3519 break; 3520 3521 case GetHubStatus: 3522 dev_dbg(hsotg->dev, "GetHubStatus\n"); 3523 memset(buf, 0, 4); 3524 break; 3525 3526 case GetPortStatus: 3527 dev_vdbg(hsotg->dev, 3528 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, 3529 hsotg->flags.d32); 3530 if (!windex || windex > 1) 3531 goto error; 3532 3533 port_status = 0; 3534 if (hsotg->flags.b.port_connect_status_change) 3535 port_status |= USB_PORT_STAT_C_CONNECTION << 16; 3536 if (hsotg->flags.b.port_enable_change) 3537 port_status |= USB_PORT_STAT_C_ENABLE << 16; 3538 if (hsotg->flags.b.port_suspend_change) 3539 port_status |= USB_PORT_STAT_C_SUSPEND << 16; 3540 if (hsotg->flags.b.port_l1_change) 3541 port_status |= USB_PORT_STAT_C_L1 << 16; 3542 if (hsotg->flags.b.port_reset_change) 3543 port_status |= USB_PORT_STAT_C_RESET << 16; 3544 if (hsotg->flags.b.port_over_current_change) { 3545 dev_warn(hsotg->dev, "Overcurrent change detected\n"); 3546 port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; 3547 } 3548 3549 if (!hsotg->flags.b.port_connect_status) { 3550 /* 3551 * The port is disconnected, which means the core is 3552 * either in device mode or it soon will be. Just 3553 * return 0's for the remainder of the port status 3554 * since the port register can't be read if the core 3555 * is in device mode. 3556 */ 3557 *(__le32 *)buf = cpu_to_le32(port_status); 3558 break; 3559 } 3560 3561 hprt0 = dwc2_readl(hsotg, HPRT0); 3562 dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); 3563 3564 if (hprt0 & HPRT0_CONNSTS) 3565 port_status |= USB_PORT_STAT_CONNECTION; 3566 if (hprt0 & HPRT0_ENA) 3567 port_status |= USB_PORT_STAT_ENABLE; 3568 if (hprt0 & HPRT0_SUSP) 3569 port_status |= USB_PORT_STAT_SUSPEND; 3570 if (hprt0 & HPRT0_OVRCURRACT) 3571 port_status |= USB_PORT_STAT_OVERCURRENT; 3572 if (hprt0 & HPRT0_RST) 3573 port_status |= USB_PORT_STAT_RESET; 3574 if (hprt0 & HPRT0_PWR) 3575 port_status |= USB_PORT_STAT_POWER; 3576 3577 speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; 3578 if (speed == HPRT0_SPD_HIGH_SPEED) 3579 port_status |= USB_PORT_STAT_HIGH_SPEED; 3580 else if (speed == HPRT0_SPD_LOW_SPEED) 3581 port_status |= USB_PORT_STAT_LOW_SPEED; 3582 3583 if (hprt0 & HPRT0_TSTCTL_MASK) 3584 port_status |= USB_PORT_STAT_TEST; 3585 /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ 3586 3587 if (hsotg->params.dma_desc_fs_enable) { 3588 /* 3589 * Enable descriptor DMA only if a full speed 3590 * device is connected. 3591 */ 3592 if (hsotg->new_connection && 3593 ((port_status & 3594 (USB_PORT_STAT_CONNECTION | 3595 USB_PORT_STAT_HIGH_SPEED | 3596 USB_PORT_STAT_LOW_SPEED)) == 3597 USB_PORT_STAT_CONNECTION)) { 3598 u32 hcfg; 3599 3600 dev_info(hsotg->dev, "Enabling descriptor DMA mode\n"); 3601 hsotg->params.dma_desc_enable = true; 3602 hcfg = dwc2_readl(hsotg, HCFG); 3603 hcfg |= HCFG_DESCDMA; 3604 dwc2_writel(hsotg, hcfg, HCFG); 3605 hsotg->new_connection = false; 3606 } 3607 } 3608 3609 dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); 3610 *(__le32 *)buf = cpu_to_le32(port_status); 3611 break; 3612 3613 case SetHubFeature: 3614 dev_dbg(hsotg->dev, "SetHubFeature\n"); 3615 /* No HUB features supported */ 3616 break; 3617 3618 case SetPortFeature: 3619 dev_dbg(hsotg->dev, "SetPortFeature\n"); 3620 if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) 3621 goto error; 3622 3623 if (!hsotg->flags.b.port_connect_status) { 3624 /* 3625 * The port is disconnected, which means the core is 3626 * either in device mode or it soon will be. Just 3627 * return without doing anything since the port 3628 * register can't be written if the core is in device 3629 * mode. 3630 */ 3631 break; 3632 } 3633 3634 switch (wvalue) { 3635 case USB_PORT_FEAT_SUSPEND: 3636 dev_dbg(hsotg->dev, 3637 "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); 3638 if (windex != hsotg->otg_port) 3639 goto error; 3640 if (!hsotg->bus_suspended) 3641 retval = dwc2_port_suspend(hsotg, windex); 3642 break; 3643 3644 case USB_PORT_FEAT_POWER: 3645 dev_dbg(hsotg->dev, 3646 "SetPortFeature - USB_PORT_FEAT_POWER\n"); 3647 hprt0 = dwc2_read_hprt0(hsotg); 3648 pwr = hprt0 & HPRT0_PWR; 3649 hprt0 |= HPRT0_PWR; 3650 dwc2_writel(hsotg, hprt0, HPRT0); 3651 if (!pwr) 3652 dwc2_vbus_supply_init(hsotg); 3653 break; 3654 3655 case USB_PORT_FEAT_RESET: 3656 dev_dbg(hsotg->dev, 3657 "SetPortFeature - USB_PORT_FEAT_RESET\n"); 3658 3659 hprt0 = dwc2_read_hprt0(hsotg); 3660 3661 if (hsotg->hibernated) { 3662 retval = dwc2_exit_hibernation(hsotg, 0, 1, 1); 3663 if (retval) 3664 dev_err(hsotg->dev, 3665 "exit hibernation failed\n"); 3666 } 3667 3668 if (hsotg->in_ppd) { 3669 retval = dwc2_exit_partial_power_down(hsotg, 1, 3670 true); 3671 if (retval) 3672 dev_err(hsotg->dev, 3673 "exit partial_power_down failed\n"); 3674 } 3675 3676 if (hsotg->params.power_down == 3677 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) 3678 dwc2_host_exit_clock_gating(hsotg, 0); 3679 3680 pcgctl = dwc2_readl(hsotg, PCGCTL); 3681 pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); 3682 dwc2_writel(hsotg, pcgctl, PCGCTL); 3683 /* ??? Original driver does this */ 3684 dwc2_writel(hsotg, 0, PCGCTL); 3685 3686 hprt0 = dwc2_read_hprt0(hsotg); 3687 pwr = hprt0 & HPRT0_PWR; 3688 /* Clear suspend bit if resetting from suspend state */ 3689 hprt0 &= ~HPRT0_SUSP; 3690 3691 /* 3692 * When B-Host the Port reset bit is set in the Start 3693 * HCD Callback function, so that the reset is started 3694 * within 1ms of the HNP success interrupt 3695 */ 3696 if (!dwc2_hcd_is_b_host(hsotg)) { 3697 hprt0 |= HPRT0_PWR | HPRT0_RST; 3698 dev_dbg(hsotg->dev, 3699 "In host mode, hprt0=%08x\n", hprt0); 3700 dwc2_writel(hsotg, hprt0, HPRT0); 3701 if (!pwr) 3702 dwc2_vbus_supply_init(hsotg); 3703 } 3704 3705 /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ 3706 msleep(50); 3707 hprt0 &= ~HPRT0_RST; 3708 dwc2_writel(hsotg, hprt0, HPRT0); 3709 hsotg->lx_state = DWC2_L0; /* Now back to On state */ 3710 break; 3711 3712 case USB_PORT_FEAT_INDICATOR: 3713 dev_dbg(hsotg->dev, 3714 "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); 3715 /* Not supported */ 3716 break; 3717 3718 case USB_PORT_FEAT_TEST: 3719 hprt0 = dwc2_read_hprt0(hsotg); 3720 dev_dbg(hsotg->dev, 3721 "SetPortFeature - USB_PORT_FEAT_TEST\n"); 3722 hprt0 &= ~HPRT0_TSTCTL_MASK; 3723 hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT; 3724 dwc2_writel(hsotg, hprt0, HPRT0); 3725 break; 3726 3727 default: 3728 retval = -EINVAL; 3729 dev_err(hsotg->dev, 3730 "SetPortFeature %1xh unknown or unsupported\n", 3731 wvalue); 3732 break; 3733 } 3734 break; 3735 3736 default: 3737 error: 3738 retval = -EINVAL; 3739 dev_dbg(hsotg->dev, 3740 "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", 3741 typereq, windex, wvalue); 3742 break; 3743 } 3744 3745 return retval; 3746 } 3747 3748 static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) 3749 { 3750 int retval; 3751 3752 if (port != 1) 3753 return -EINVAL; 3754 3755 retval = (hsotg->flags.b.port_connect_status_change || 3756 hsotg->flags.b.port_reset_change || 3757 hsotg->flags.b.port_enable_change || 3758 hsotg->flags.b.port_suspend_change || 3759 hsotg->flags.b.port_over_current_change); 3760 3761 if (retval) { 3762 dev_dbg(hsotg->dev, 3763 "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); 3764 dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", 3765 hsotg->flags.b.port_connect_status_change); 3766 dev_dbg(hsotg->dev, " port_reset_change: %d\n", 3767 hsotg->flags.b.port_reset_change); 3768 dev_dbg(hsotg->dev, " port_enable_change: %d\n", 3769 hsotg->flags.b.port_enable_change); 3770 dev_dbg(hsotg->dev, " port_suspend_change: %d\n", 3771 hsotg->flags.b.port_suspend_change); 3772 dev_dbg(hsotg->dev, " port_over_current_change: %d\n", 3773 hsotg->flags.b.port_over_current_change); 3774 } 3775 3776 return retval; 3777 } 3778 3779 int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) 3780 { 3781 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3782 3783 #ifdef DWC2_DEBUG_SOF 3784 dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", 3785 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); 3786 #endif 3787 return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3788 } 3789 3790 int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us) 3791 { 3792 u32 hprt = dwc2_readl(hsotg, HPRT0); 3793 u32 hfir = dwc2_readl(hsotg, HFIR); 3794 u32 hfnum = dwc2_readl(hsotg, HFNUM); 3795 unsigned int us_per_frame; 3796 unsigned int frame_number; 3797 unsigned int remaining; 3798 unsigned int interval; 3799 unsigned int phy_clks; 3800 3801 /* High speed has 125 us per (micro) frame; others are 1 ms per */ 3802 us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125; 3803 3804 /* Extract fields */ 3805 frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; 3806 remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT; 3807 interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT; 3808 3809 /* 3810 * Number of phy clocks since the last tick of the frame number after 3811 * "us" has passed. 3812 */ 3813 phy_clks = (interval - remaining) + 3814 DIV_ROUND_UP(interval * us, us_per_frame); 3815 3816 return dwc2_frame_num_inc(frame_number, phy_clks / interval); 3817 } 3818 3819 int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) 3820 { 3821 return hsotg->op_state == OTG_STATE_B_HOST; 3822 } 3823 3824 static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, 3825 int iso_desc_count, 3826 gfp_t mem_flags) 3827 { 3828 struct dwc2_hcd_urb *urb; 3829 3830 urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags); 3831 if (urb) 3832 urb->packet_count = iso_desc_count; 3833 return urb; 3834 } 3835 3836 static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, 3837 struct dwc2_hcd_urb *urb, u8 dev_addr, 3838 u8 ep_num, u8 ep_type, u8 ep_dir, 3839 u16 maxp, u16 maxp_mult) 3840 { 3841 if (dbg_perio() || 3842 ep_type == USB_ENDPOINT_XFER_BULK || 3843 ep_type == USB_ENDPOINT_XFER_CONTROL) 3844 dev_vdbg(hsotg->dev, 3845 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n", 3846 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult); 3847 urb->pipe_info.dev_addr = dev_addr; 3848 urb->pipe_info.ep_num = ep_num; 3849 urb->pipe_info.pipe_type = ep_type; 3850 urb->pipe_info.pipe_dir = ep_dir; 3851 urb->pipe_info.maxp = maxp; 3852 urb->pipe_info.maxp_mult = maxp_mult; 3853 } 3854 3855 /* 3856 * NOTE: This function will be removed once the peripheral controller code 3857 * is integrated and the driver is stable 3858 */ 3859 void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) 3860 { 3861 #ifdef DEBUG 3862 struct dwc2_host_chan *chan; 3863 struct dwc2_hcd_urb *urb; 3864 struct dwc2_qtd *qtd; 3865 int num_channels; 3866 u32 np_tx_status; 3867 u32 p_tx_status; 3868 int i; 3869 3870 num_channels = hsotg->params.host_channels; 3871 dev_dbg(hsotg->dev, "\n"); 3872 dev_dbg(hsotg->dev, 3873 "************************************************************\n"); 3874 dev_dbg(hsotg->dev, "HCD State:\n"); 3875 dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); 3876 3877 for (i = 0; i < num_channels; i++) { 3878 chan = hsotg->hc_ptr_array[i]; 3879 dev_dbg(hsotg->dev, " Channel %d:\n", i); 3880 dev_dbg(hsotg->dev, 3881 " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", 3882 chan->dev_addr, chan->ep_num, chan->ep_is_in); 3883 dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); 3884 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); 3885 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); 3886 dev_dbg(hsotg->dev, " data_pid_start: %d\n", 3887 chan->data_pid_start); 3888 dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); 3889 dev_dbg(hsotg->dev, " xfer_started: %d\n", 3890 chan->xfer_started); 3891 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); 3892 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", 3893 (unsigned long)chan->xfer_dma); 3894 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); 3895 dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); 3896 dev_dbg(hsotg->dev, " halt_on_queue: %d\n", 3897 chan->halt_on_queue); 3898 dev_dbg(hsotg->dev, " halt_pending: %d\n", 3899 chan->halt_pending); 3900 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); 3901 dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); 3902 dev_dbg(hsotg->dev, " complete_split: %d\n", 3903 chan->complete_split); 3904 dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); 3905 dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); 3906 dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); 3907 dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); 3908 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); 3909 3910 if (chan->xfer_started) { 3911 u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; 3912 3913 hfnum = dwc2_readl(hsotg, HFNUM); 3914 hcchar = dwc2_readl(hsotg, HCCHAR(i)); 3915 hctsiz = dwc2_readl(hsotg, HCTSIZ(i)); 3916 hcint = dwc2_readl(hsotg, HCINT(i)); 3917 hcintmsk = dwc2_readl(hsotg, HCINTMSK(i)); 3918 dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); 3919 dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); 3920 dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); 3921 dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); 3922 dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); 3923 } 3924 3925 if (!(chan->xfer_started && chan->qh)) 3926 continue; 3927 3928 list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { 3929 if (!qtd->in_process) 3930 break; 3931 urb = qtd->urb; 3932 dev_dbg(hsotg->dev, " URB Info:\n"); 3933 dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", 3934 qtd, urb); 3935 if (urb) { 3936 dev_dbg(hsotg->dev, 3937 " Dev: %d, EP: %d %s\n", 3938 dwc2_hcd_get_dev_addr(&urb->pipe_info), 3939 dwc2_hcd_get_ep_num(&urb->pipe_info), 3940 dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 3941 "IN" : "OUT"); 3942 dev_dbg(hsotg->dev, 3943 " Max packet size: %d (%d mult)\n", 3944 dwc2_hcd_get_maxp(&urb->pipe_info), 3945 dwc2_hcd_get_maxp_mult(&urb->pipe_info)); 3946 dev_dbg(hsotg->dev, 3947 " transfer_buffer: %p\n", 3948 urb->buf); 3949 dev_dbg(hsotg->dev, 3950 " transfer_dma: %08lx\n", 3951 (unsigned long)urb->dma); 3952 dev_dbg(hsotg->dev, 3953 " transfer_buffer_length: %d\n", 3954 urb->length); 3955 dev_dbg(hsotg->dev, " actual_length: %d\n", 3956 urb->actual_length); 3957 } 3958 } 3959 } 3960 3961 dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", 3962 hsotg->non_periodic_channels); 3963 dev_dbg(hsotg->dev, " periodic_channels: %d\n", 3964 hsotg->periodic_channels); 3965 dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); 3966 np_tx_status = dwc2_readl(hsotg, GNPTXSTS); 3967 dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", 3968 (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3969 dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", 3970 (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3971 p_tx_status = dwc2_readl(hsotg, HPTXSTS); 3972 dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", 3973 (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); 3974 dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", 3975 (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); 3976 dwc2_dump_global_registers(hsotg); 3977 dwc2_dump_host_registers(hsotg); 3978 dev_dbg(hsotg->dev, 3979 "************************************************************\n"); 3980 dev_dbg(hsotg->dev, "\n"); 3981 #endif 3982 } 3983 3984 struct wrapper_priv_data { 3985 struct dwc2_hsotg *hsotg; 3986 }; 3987 3988 /* Gets the dwc2_hsotg from a usb_hcd */ 3989 static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) 3990 { 3991 struct wrapper_priv_data *p; 3992 3993 p = (struct wrapper_priv_data *)&hcd->hcd_priv; 3994 return p->hsotg; 3995 } 3996 3997 /** 3998 * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context 3999 * 4000 * This will get the dwc2_tt structure (and ttport) associated with the given 4001 * context (which is really just a struct urb pointer). 4002 * 4003 * The first time this is called for a given TT we allocate memory for our 4004 * structure. When everyone is done and has called dwc2_host_put_tt_info() 4005 * then the refcount for the structure will go to 0 and we'll free it. 4006 * 4007 * @hsotg: The HCD state structure for the DWC OTG controller. 4008 * @context: The priv pointer from a struct dwc2_hcd_urb. 4009 * @mem_flags: Flags for allocating memory. 4010 * @ttport: We'll return this device's port number here. That's used to 4011 * reference into the bitmap if we're on a multi_tt hub. 4012 * 4013 * Return: a pointer to a struct dwc2_tt. Don't forget to call 4014 * dwc2_host_put_tt_info()! Returns NULL upon memory alloc failure. 4015 */ 4016 4017 struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context, 4018 gfp_t mem_flags, int *ttport) 4019 { 4020 struct urb *urb = context; 4021 struct dwc2_tt *dwc_tt = NULL; 4022 4023 if (urb->dev->tt) { 4024 *ttport = urb->dev->ttport; 4025 4026 dwc_tt = urb->dev->tt->hcpriv; 4027 if (!dwc_tt) { 4028 size_t bitmap_size; 4029 4030 /* 4031 * For single_tt we need one schedule. For multi_tt 4032 * we need one per port. 4033 */ 4034 bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP * 4035 sizeof(dwc_tt->periodic_bitmaps[0]); 4036 if (urb->dev->tt->multi) 4037 bitmap_size *= urb->dev->tt->hub->maxchild; 4038 4039 dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size, 4040 mem_flags); 4041 if (!dwc_tt) 4042 return NULL; 4043 4044 dwc_tt->usb_tt = urb->dev->tt; 4045 dwc_tt->usb_tt->hcpriv = dwc_tt; 4046 } 4047 4048 dwc_tt->refcount++; 4049 } 4050 4051 return dwc_tt; 4052 } 4053 4054 /** 4055 * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info() 4056 * 4057 * Frees resources allocated by dwc2_host_get_tt_info() if all current holders 4058 * of the structure are done. 4059 * 4060 * It's OK to call this with NULL. 4061 * 4062 * @hsotg: The HCD state structure for the DWC OTG controller. 4063 * @dwc_tt: The pointer returned by dwc2_host_get_tt_info. 4064 */ 4065 void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt) 4066 { 4067 /* Model kfree and make put of NULL a no-op */ 4068 if (!dwc_tt) 4069 return; 4070 4071 WARN_ON(dwc_tt->refcount < 1); 4072 4073 dwc_tt->refcount--; 4074 if (!dwc_tt->refcount) { 4075 dwc_tt->usb_tt->hcpriv = NULL; 4076 kfree(dwc_tt); 4077 } 4078 } 4079 4080 int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) 4081 { 4082 struct urb *urb = context; 4083 4084 return urb->dev->speed; 4085 } 4086 4087 static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4088 struct urb *urb) 4089 { 4090 struct usb_bus *bus = hcd_to_bus(hcd); 4091 4092 if (urb->interval) 4093 bus->bandwidth_allocated += bw / urb->interval; 4094 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4095 bus->bandwidth_isoc_reqs++; 4096 else 4097 bus->bandwidth_int_reqs++; 4098 } 4099 4100 static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, 4101 struct urb *urb) 4102 { 4103 struct usb_bus *bus = hcd_to_bus(hcd); 4104 4105 if (urb->interval) 4106 bus->bandwidth_allocated -= bw / urb->interval; 4107 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) 4108 bus->bandwidth_isoc_reqs--; 4109 else 4110 bus->bandwidth_int_reqs--; 4111 } 4112 4113 /* 4114 * Sets the final status of an URB and returns it to the upper layer. Any 4115 * required cleanup of the URB is performed. 4116 * 4117 * Must be called with interrupt disabled and spinlock held 4118 */ 4119 void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, 4120 int status) 4121 { 4122 struct urb *urb; 4123 int i; 4124 4125 if (!qtd) { 4126 dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); 4127 return; 4128 } 4129 4130 if (!qtd->urb) { 4131 dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); 4132 return; 4133 } 4134 4135 urb = qtd->urb->priv; 4136 if (!urb) { 4137 dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); 4138 return; 4139 } 4140 4141 urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); 4142 4143 if (dbg_urb(urb)) 4144 dev_vdbg(hsotg->dev, 4145 "%s: urb %p device %d ep %d-%s status %d actual %d\n", 4146 __func__, urb, usb_pipedevice(urb->pipe), 4147 usb_pipeendpoint(urb->pipe), 4148 usb_pipein(urb->pipe) ? "IN" : "OUT", status, 4149 urb->actual_length); 4150 4151 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4152 if (!hsotg->params.dma_desc_enable) 4153 urb->start_frame = qtd->qh->start_active_frame; 4154 urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); 4155 for (i = 0; i < urb->number_of_packets; ++i) { 4156 urb->iso_frame_desc[i].actual_length = 4157 dwc2_hcd_urb_get_iso_desc_actual_length( 4158 qtd->urb, i); 4159 urb->iso_frame_desc[i].status = 4160 dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); 4161 } 4162 } 4163 4164 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { 4165 for (i = 0; i < urb->number_of_packets; i++) 4166 dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", 4167 i, urb->iso_frame_desc[i].status); 4168 } 4169 4170 urb->status = status; 4171 if (!status) { 4172 if ((urb->transfer_flags & URB_SHORT_NOT_OK) && 4173 urb->actual_length < urb->transfer_buffer_length) 4174 urb->status = -EREMOTEIO; 4175 } 4176 4177 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4178 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4179 struct usb_host_endpoint *ep = urb->ep; 4180 4181 if (ep) 4182 dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), 4183 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4184 urb); 4185 } 4186 4187 usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); 4188 urb->hcpriv = NULL; 4189 kfree(qtd->urb); 4190 qtd->urb = NULL; 4191 4192 usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); 4193 } 4194 4195 /* 4196 * Work queue function for starting the HCD when A-Cable is connected 4197 */ 4198 static void dwc2_hcd_start_func(struct work_struct *work) 4199 { 4200 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4201 start_work.work); 4202 4203 dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); 4204 dwc2_host_start(hsotg); 4205 } 4206 4207 /* 4208 * Reset work queue function 4209 */ 4210 static void dwc2_hcd_reset_func(struct work_struct *work) 4211 { 4212 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4213 reset_work.work); 4214 unsigned long flags; 4215 u32 hprt0; 4216 4217 dev_dbg(hsotg->dev, "USB RESET function called\n"); 4218 4219 spin_lock_irqsave(&hsotg->lock, flags); 4220 4221 hprt0 = dwc2_read_hprt0(hsotg); 4222 hprt0 &= ~HPRT0_RST; 4223 dwc2_writel(hsotg, hprt0, HPRT0); 4224 hsotg->flags.b.port_reset_change = 1; 4225 4226 spin_unlock_irqrestore(&hsotg->lock, flags); 4227 } 4228 4229 static void dwc2_hcd_phy_reset_func(struct work_struct *work) 4230 { 4231 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, 4232 phy_reset_work); 4233 int ret; 4234 4235 ret = phy_reset(hsotg->phy); 4236 if (ret) 4237 dev_warn(hsotg->dev, "PHY reset failed\n"); 4238 } 4239 4240 /* 4241 * ========================================================================= 4242 * Linux HC Driver Functions 4243 * ========================================================================= 4244 */ 4245 4246 /* 4247 * Initializes the DWC_otg controller and its root hub and prepares it for host 4248 * mode operation. Activates the root port. Returns 0 on success and a negative 4249 * error code on failure. 4250 */ 4251 static int _dwc2_hcd_start(struct usb_hcd *hcd) 4252 { 4253 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4254 struct usb_bus *bus = hcd_to_bus(hcd); 4255 unsigned long flags; 4256 u32 hprt0; 4257 int ret; 4258 4259 dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); 4260 4261 spin_lock_irqsave(&hsotg->lock, flags); 4262 hsotg->lx_state = DWC2_L0; 4263 hcd->state = HC_STATE_RUNNING; 4264 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4265 4266 if (dwc2_is_device_mode(hsotg)) { 4267 spin_unlock_irqrestore(&hsotg->lock, flags); 4268 return 0; /* why 0 ?? */ 4269 } 4270 4271 dwc2_hcd_reinit(hsotg); 4272 4273 hprt0 = dwc2_read_hprt0(hsotg); 4274 /* Has vbus power been turned on in dwc2_core_host_init ? */ 4275 if (hprt0 & HPRT0_PWR) { 4276 /* Enable external vbus supply before resuming root hub */ 4277 spin_unlock_irqrestore(&hsotg->lock, flags); 4278 ret = dwc2_vbus_supply_init(hsotg); 4279 if (ret) 4280 return ret; 4281 spin_lock_irqsave(&hsotg->lock, flags); 4282 } 4283 4284 /* Initialize and connect root hub if one is not already attached */ 4285 if (bus->root_hub) { 4286 dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); 4287 /* Inform the HUB driver to resume */ 4288 usb_hcd_resume_root_hub(hcd); 4289 } 4290 4291 spin_unlock_irqrestore(&hsotg->lock, flags); 4292 4293 return 0; 4294 } 4295 4296 /* 4297 * Halts the DWC_otg host mode operations in a clean manner. USB transfers are 4298 * stopped. 4299 */ 4300 static void _dwc2_hcd_stop(struct usb_hcd *hcd) 4301 { 4302 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4303 unsigned long flags; 4304 u32 hprt0; 4305 4306 /* Turn off all host-specific interrupts */ 4307 dwc2_disable_host_interrupts(hsotg); 4308 4309 /* Wait for interrupt processing to finish */ 4310 synchronize_irq(hcd->irq); 4311 4312 spin_lock_irqsave(&hsotg->lock, flags); 4313 hprt0 = dwc2_read_hprt0(hsotg); 4314 /* Ensure hcd is disconnected */ 4315 dwc2_hcd_disconnect(hsotg, true); 4316 dwc2_hcd_stop(hsotg); 4317 hsotg->lx_state = DWC2_L3; 4318 hcd->state = HC_STATE_HALT; 4319 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4320 spin_unlock_irqrestore(&hsotg->lock, flags); 4321 4322 /* keep balanced supply init/exit by checking HPRT0_PWR */ 4323 if (hprt0 & HPRT0_PWR) 4324 dwc2_vbus_supply_exit(hsotg); 4325 4326 usleep_range(1000, 3000); 4327 } 4328 4329 static int _dwc2_hcd_suspend(struct usb_hcd *hcd) 4330 { 4331 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4332 unsigned long flags; 4333 int ret = 0; 4334 4335 spin_lock_irqsave(&hsotg->lock, flags); 4336 4337 if (dwc2_is_device_mode(hsotg)) 4338 goto unlock; 4339 4340 if (hsotg->lx_state != DWC2_L0) 4341 goto unlock; 4342 4343 if (!HCD_HW_ACCESSIBLE(hcd)) 4344 goto unlock; 4345 4346 if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) 4347 goto unlock; 4348 4349 if (hsotg->bus_suspended) 4350 goto skip_power_saving; 4351 4352 if (hsotg->flags.b.port_connect_status == 0) 4353 goto skip_power_saving; 4354 4355 switch (hsotg->params.power_down) { 4356 case DWC2_POWER_DOWN_PARAM_PARTIAL: 4357 /* Enter partial_power_down */ 4358 ret = dwc2_enter_partial_power_down(hsotg); 4359 if (ret) 4360 dev_err(hsotg->dev, 4361 "enter partial_power_down failed\n"); 4362 /* After entering suspend, hardware is not accessible */ 4363 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4364 break; 4365 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 4366 /* Enter hibernation */ 4367 spin_unlock_irqrestore(&hsotg->lock, flags); 4368 ret = dwc2_enter_hibernation(hsotg, 1); 4369 if (ret) 4370 dev_err(hsotg->dev, "enter hibernation failed\n"); 4371 spin_lock_irqsave(&hsotg->lock, flags); 4372 4373 /* After entering suspend, hardware is not accessible */ 4374 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4375 break; 4376 case DWC2_POWER_DOWN_PARAM_NONE: 4377 /* 4378 * If not hibernation nor partial power down are supported, 4379 * clock gating is used to save power. 4380 */ 4381 if (!hsotg->params.no_clock_gating) { 4382 dwc2_host_enter_clock_gating(hsotg); 4383 4384 /* After entering suspend, hardware is not accessible */ 4385 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4386 } 4387 break; 4388 default: 4389 goto skip_power_saving; 4390 } 4391 4392 spin_unlock_irqrestore(&hsotg->lock, flags); 4393 dwc2_vbus_supply_exit(hsotg); 4394 spin_lock_irqsave(&hsotg->lock, flags); 4395 4396 /* Ask phy to be suspended */ 4397 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4398 spin_unlock_irqrestore(&hsotg->lock, flags); 4399 usb_phy_set_suspend(hsotg->uphy, true); 4400 spin_lock_irqsave(&hsotg->lock, flags); 4401 } 4402 4403 skip_power_saving: 4404 hsotg->lx_state = DWC2_L2; 4405 unlock: 4406 spin_unlock_irqrestore(&hsotg->lock, flags); 4407 4408 return ret; 4409 } 4410 4411 static int _dwc2_hcd_resume(struct usb_hcd *hcd) 4412 { 4413 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4414 unsigned long flags; 4415 u32 hprt0; 4416 int ret = 0; 4417 4418 spin_lock_irqsave(&hsotg->lock, flags); 4419 4420 if (dwc2_is_device_mode(hsotg)) 4421 goto unlock; 4422 4423 if (hsotg->lx_state != DWC2_L2) 4424 goto unlock; 4425 4426 hprt0 = dwc2_read_hprt0(hsotg); 4427 4428 /* 4429 * Added port connection status checking which prevents exiting from 4430 * Partial Power Down mode from _dwc2_hcd_resume() if not in Partial 4431 * Power Down mode. 4432 */ 4433 if (hprt0 & HPRT0_CONNSTS) { 4434 hsotg->lx_state = DWC2_L0; 4435 goto unlock; 4436 } 4437 4438 switch (hsotg->params.power_down) { 4439 case DWC2_POWER_DOWN_PARAM_PARTIAL: 4440 ret = dwc2_exit_partial_power_down(hsotg, 0, true); 4441 if (ret) 4442 dev_err(hsotg->dev, 4443 "exit partial_power_down failed\n"); 4444 /* 4445 * Set HW accessible bit before powering on the controller 4446 * since an interrupt may rise. 4447 */ 4448 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4449 break; 4450 case DWC2_POWER_DOWN_PARAM_HIBERNATION: 4451 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); 4452 if (ret) 4453 dev_err(hsotg->dev, "exit hibernation failed.\n"); 4454 4455 /* 4456 * Set HW accessible bit before powering on the controller 4457 * since an interrupt may rise. 4458 */ 4459 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4460 break; 4461 case DWC2_POWER_DOWN_PARAM_NONE: 4462 /* 4463 * If not hibernation nor partial power down are supported, 4464 * port resume is done using the clock gating programming flow. 4465 */ 4466 spin_unlock_irqrestore(&hsotg->lock, flags); 4467 dwc2_host_exit_clock_gating(hsotg, 0); 4468 4469 /* 4470 * Initialize the Core for Host mode, as after system resume 4471 * the global interrupts are disabled. 4472 */ 4473 dwc2_core_init(hsotg, false); 4474 dwc2_enable_global_interrupts(hsotg); 4475 dwc2_hcd_reinit(hsotg); 4476 spin_lock_irqsave(&hsotg->lock, flags); 4477 4478 /* 4479 * Set HW accessible bit before powering on the controller 4480 * since an interrupt may rise. 4481 */ 4482 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 4483 break; 4484 default: 4485 hsotg->lx_state = DWC2_L0; 4486 goto unlock; 4487 } 4488 4489 /* Change Root port status, as port status change occurred after resume.*/ 4490 hsotg->flags.b.port_suspend_change = 1; 4491 4492 /* 4493 * Enable power if not already done. 4494 * This must not be spinlocked since duration 4495 * of this call is unknown. 4496 */ 4497 if (!IS_ERR_OR_NULL(hsotg->uphy)) { 4498 spin_unlock_irqrestore(&hsotg->lock, flags); 4499 usb_phy_set_suspend(hsotg->uphy, false); 4500 spin_lock_irqsave(&hsotg->lock, flags); 4501 } 4502 4503 /* Enable external vbus supply after resuming the port. */ 4504 spin_unlock_irqrestore(&hsotg->lock, flags); 4505 dwc2_vbus_supply_init(hsotg); 4506 4507 /* Wait for controller to correctly update D+/D- level */ 4508 usleep_range(3000, 5000); 4509 spin_lock_irqsave(&hsotg->lock, flags); 4510 4511 /* 4512 * Clear Port Enable and Port Status changes. 4513 * Enable Port Power. 4514 */ 4515 dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET | 4516 HPRT0_ENACHG, HPRT0); 4517 4518 /* Wait for controller to detect Port Connect */ 4519 spin_unlock_irqrestore(&hsotg->lock, flags); 4520 usleep_range(5000, 7000); 4521 spin_lock_irqsave(&hsotg->lock, flags); 4522 unlock: 4523 spin_unlock_irqrestore(&hsotg->lock, flags); 4524 4525 return ret; 4526 } 4527 4528 /* Returns the current frame number */ 4529 static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) 4530 { 4531 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4532 4533 return dwc2_hcd_get_frame_number(hsotg); 4534 } 4535 4536 static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, 4537 char *fn_name) 4538 { 4539 #ifdef VERBOSE_DEBUG 4540 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4541 char *pipetype = NULL; 4542 char *speed = NULL; 4543 4544 dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); 4545 dev_vdbg(hsotg->dev, " Device address: %d\n", 4546 usb_pipedevice(urb->pipe)); 4547 dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", 4548 usb_pipeendpoint(urb->pipe), 4549 usb_pipein(urb->pipe) ? "IN" : "OUT"); 4550 4551 switch (usb_pipetype(urb->pipe)) { 4552 case PIPE_CONTROL: 4553 pipetype = "CONTROL"; 4554 break; 4555 case PIPE_BULK: 4556 pipetype = "BULK"; 4557 break; 4558 case PIPE_INTERRUPT: 4559 pipetype = "INTERRUPT"; 4560 break; 4561 case PIPE_ISOCHRONOUS: 4562 pipetype = "ISOCHRONOUS"; 4563 break; 4564 } 4565 4566 dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, 4567 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? 4568 "IN" : "OUT"); 4569 4570 switch (urb->dev->speed) { 4571 case USB_SPEED_HIGH: 4572 speed = "HIGH"; 4573 break; 4574 case USB_SPEED_FULL: 4575 speed = "FULL"; 4576 break; 4577 case USB_SPEED_LOW: 4578 speed = "LOW"; 4579 break; 4580 default: 4581 speed = "UNKNOWN"; 4582 break; 4583 } 4584 4585 dev_vdbg(hsotg->dev, " Speed: %s\n", speed); 4586 dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n", 4587 usb_endpoint_maxp(&urb->ep->desc), 4588 usb_endpoint_maxp_mult(&urb->ep->desc)); 4589 4590 dev_vdbg(hsotg->dev, " Data buffer length: %d\n", 4591 urb->transfer_buffer_length); 4592 dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", 4593 urb->transfer_buffer, (unsigned long)urb->transfer_dma); 4594 dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", 4595 urb->setup_packet, (unsigned long)urb->setup_dma); 4596 dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); 4597 4598 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { 4599 int i; 4600 4601 for (i = 0; i < urb->number_of_packets; i++) { 4602 dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); 4603 dev_vdbg(hsotg->dev, " offset: %d, length %d\n", 4604 urb->iso_frame_desc[i].offset, 4605 urb->iso_frame_desc[i].length); 4606 } 4607 } 4608 #endif 4609 } 4610 4611 /* 4612 * Starts processing a USB transfer request specified by a USB Request Block 4613 * (URB). mem_flags indicates the type of memory allocation to use while 4614 * processing this URB. 4615 */ 4616 static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, 4617 gfp_t mem_flags) 4618 { 4619 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4620 struct usb_host_endpoint *ep = urb->ep; 4621 struct dwc2_hcd_urb *dwc2_urb; 4622 int i; 4623 int retval; 4624 int alloc_bandwidth = 0; 4625 u8 ep_type = 0; 4626 u32 tflags = 0; 4627 void *buf; 4628 unsigned long flags; 4629 struct dwc2_qh *qh; 4630 bool qh_allocated = false; 4631 struct dwc2_qtd *qtd; 4632 struct dwc2_gregs_backup *gr; 4633 4634 gr = &hsotg->gr_backup; 4635 4636 if (dbg_urb(urb)) { 4637 dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); 4638 dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); 4639 } 4640 4641 if (hsotg->hibernated) { 4642 if (gr->gotgctl & GOTGCTL_CURMODE_HOST) 4643 retval = dwc2_exit_hibernation(hsotg, 0, 0, 1); 4644 else 4645 retval = dwc2_exit_hibernation(hsotg, 0, 0, 0); 4646 4647 if (retval) 4648 dev_err(hsotg->dev, 4649 "exit hibernation failed.\n"); 4650 } 4651 4652 if (hsotg->in_ppd) { 4653 retval = dwc2_exit_partial_power_down(hsotg, 0, true); 4654 if (retval) 4655 dev_err(hsotg->dev, 4656 "exit partial_power_down failed\n"); 4657 } 4658 4659 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && 4660 hsotg->bus_suspended && !hsotg->params.no_clock_gating) { 4661 if (dwc2_is_device_mode(hsotg)) 4662 dwc2_gadget_exit_clock_gating(hsotg, 0); 4663 else 4664 dwc2_host_exit_clock_gating(hsotg, 0); 4665 } 4666 4667 if (!ep) 4668 return -EINVAL; 4669 4670 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || 4671 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { 4672 spin_lock_irqsave(&hsotg->lock, flags); 4673 if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) 4674 alloc_bandwidth = 1; 4675 spin_unlock_irqrestore(&hsotg->lock, flags); 4676 } 4677 4678 switch (usb_pipetype(urb->pipe)) { 4679 case PIPE_CONTROL: 4680 ep_type = USB_ENDPOINT_XFER_CONTROL; 4681 break; 4682 case PIPE_ISOCHRONOUS: 4683 ep_type = USB_ENDPOINT_XFER_ISOC; 4684 break; 4685 case PIPE_BULK: 4686 ep_type = USB_ENDPOINT_XFER_BULK; 4687 break; 4688 case PIPE_INTERRUPT: 4689 ep_type = USB_ENDPOINT_XFER_INT; 4690 break; 4691 } 4692 4693 dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, 4694 mem_flags); 4695 if (!dwc2_urb) 4696 return -ENOMEM; 4697 4698 dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), 4699 usb_pipeendpoint(urb->pipe), ep_type, 4700 usb_pipein(urb->pipe), 4701 usb_endpoint_maxp(&ep->desc), 4702 usb_endpoint_maxp_mult(&ep->desc)); 4703 4704 buf = urb->transfer_buffer; 4705 4706 if (hcd_uses_dma(hcd)) { 4707 if (!buf && (urb->transfer_dma & 3)) { 4708 dev_err(hsotg->dev, 4709 "%s: unaligned transfer with no transfer_buffer", 4710 __func__); 4711 retval = -EINVAL; 4712 goto fail0; 4713 } 4714 } 4715 4716 if (!(urb->transfer_flags & URB_NO_INTERRUPT)) 4717 tflags |= URB_GIVEBACK_ASAP; 4718 if (urb->transfer_flags & URB_ZERO_PACKET) 4719 tflags |= URB_SEND_ZERO_PACKET; 4720 4721 dwc2_urb->priv = urb; 4722 dwc2_urb->buf = buf; 4723 dwc2_urb->dma = urb->transfer_dma; 4724 dwc2_urb->length = urb->transfer_buffer_length; 4725 dwc2_urb->setup_packet = urb->setup_packet; 4726 dwc2_urb->setup_dma = urb->setup_dma; 4727 dwc2_urb->flags = tflags; 4728 dwc2_urb->interval = urb->interval; 4729 dwc2_urb->status = -EINPROGRESS; 4730 4731 for (i = 0; i < urb->number_of_packets; ++i) 4732 dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, 4733 urb->iso_frame_desc[i].offset, 4734 urb->iso_frame_desc[i].length); 4735 4736 urb->hcpriv = dwc2_urb; 4737 qh = (struct dwc2_qh *)ep->hcpriv; 4738 /* Create QH for the endpoint if it doesn't exist */ 4739 if (!qh) { 4740 qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags); 4741 if (!qh) { 4742 retval = -ENOMEM; 4743 goto fail0; 4744 } 4745 ep->hcpriv = qh; 4746 qh_allocated = true; 4747 } 4748 4749 qtd = kzalloc(sizeof(*qtd), mem_flags); 4750 if (!qtd) { 4751 retval = -ENOMEM; 4752 goto fail1; 4753 } 4754 4755 spin_lock_irqsave(&hsotg->lock, flags); 4756 retval = usb_hcd_link_urb_to_ep(hcd, urb); 4757 if (retval) 4758 goto fail2; 4759 4760 retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd); 4761 if (retval) 4762 goto fail3; 4763 4764 if (alloc_bandwidth) { 4765 dwc2_allocate_bus_bandwidth(hcd, 4766 dwc2_hcd_get_ep_bandwidth(hsotg, ep), 4767 urb); 4768 } 4769 4770 spin_unlock_irqrestore(&hsotg->lock, flags); 4771 4772 return 0; 4773 4774 fail3: 4775 dwc2_urb->priv = NULL; 4776 usb_hcd_unlink_urb_from_ep(hcd, urb); 4777 if (qh_allocated && qh->channel && qh->channel->qh == qh) 4778 qh->channel->qh = NULL; 4779 fail2: 4780 urb->hcpriv = NULL; 4781 spin_unlock_irqrestore(&hsotg->lock, flags); 4782 kfree(qtd); 4783 fail1: 4784 if (qh_allocated) { 4785 struct dwc2_qtd *qtd2, *qtd2_tmp; 4786 4787 ep->hcpriv = NULL; 4788 dwc2_hcd_qh_unlink(hsotg, qh); 4789 /* Free each QTD in the QH's QTD list */ 4790 list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list, 4791 qtd_list_entry) 4792 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh); 4793 dwc2_hcd_qh_free(hsotg, qh); 4794 } 4795 fail0: 4796 kfree(dwc2_urb); 4797 4798 return retval; 4799 } 4800 4801 /* 4802 * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. 4803 */ 4804 static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, 4805 int status) 4806 { 4807 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4808 int rc; 4809 unsigned long flags; 4810 4811 dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); 4812 dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); 4813 4814 spin_lock_irqsave(&hsotg->lock, flags); 4815 4816 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 4817 if (rc) 4818 goto out; 4819 4820 if (!urb->hcpriv) { 4821 dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); 4822 goto out; 4823 } 4824 4825 rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); 4826 4827 usb_hcd_unlink_urb_from_ep(hcd, urb); 4828 4829 kfree(urb->hcpriv); 4830 urb->hcpriv = NULL; 4831 4832 /* Higher layer software sets URB status */ 4833 spin_unlock(&hsotg->lock); 4834 usb_hcd_giveback_urb(hcd, urb, status); 4835 spin_lock(&hsotg->lock); 4836 4837 dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); 4838 dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); 4839 out: 4840 spin_unlock_irqrestore(&hsotg->lock, flags); 4841 4842 return rc; 4843 } 4844 4845 /* 4846 * Frees resources in the DWC_otg controller related to a given endpoint. Also 4847 * clears state in the HCD related to the endpoint. Any URBs for the endpoint 4848 * must already be dequeued. 4849 */ 4850 static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, 4851 struct usb_host_endpoint *ep) 4852 { 4853 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4854 4855 dev_dbg(hsotg->dev, 4856 "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", 4857 ep->desc.bEndpointAddress, ep->hcpriv); 4858 dwc2_hcd_endpoint_disable(hsotg, ep, 250); 4859 } 4860 4861 /* 4862 * Resets endpoint specific parameter values, in current version used to reset 4863 * the data toggle (as a WA). This function can be called from usb_clear_halt 4864 * routine. 4865 */ 4866 static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, 4867 struct usb_host_endpoint *ep) 4868 { 4869 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4870 unsigned long flags; 4871 4872 dev_dbg(hsotg->dev, 4873 "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", 4874 ep->desc.bEndpointAddress); 4875 4876 spin_lock_irqsave(&hsotg->lock, flags); 4877 dwc2_hcd_endpoint_reset(hsotg, ep); 4878 spin_unlock_irqrestore(&hsotg->lock, flags); 4879 } 4880 4881 /* 4882 * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if 4883 * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid 4884 * interrupt. 4885 * 4886 * This function is called by the USB core when an interrupt occurs 4887 */ 4888 static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) 4889 { 4890 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4891 4892 return dwc2_handle_hcd_intr(hsotg); 4893 } 4894 4895 /* 4896 * Creates Status Change bitmap for the root hub and root port. The bitmap is 4897 * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 4898 * is the status change indicator for the single root port. Returns 1 if either 4899 * change indicator is 1, otherwise returns 0. 4900 */ 4901 static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) 4902 { 4903 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4904 4905 buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; 4906 return buf[0] != 0; 4907 } 4908 4909 /* Handles hub class-specific requests */ 4910 static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, 4911 u16 windex, char *buf, u16 wlength) 4912 { 4913 int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, 4914 wvalue, windex, buf, wlength); 4915 return retval; 4916 } 4917 4918 /* Handles hub TT buffer clear completions */ 4919 static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, 4920 struct usb_host_endpoint *ep) 4921 { 4922 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4923 struct dwc2_qh *qh; 4924 unsigned long flags; 4925 4926 qh = ep->hcpriv; 4927 if (!qh) 4928 return; 4929 4930 spin_lock_irqsave(&hsotg->lock, flags); 4931 qh->tt_buffer_dirty = 0; 4932 4933 if (hsotg->flags.b.port_connect_status) 4934 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); 4935 4936 spin_unlock_irqrestore(&hsotg->lock, flags); 4937 } 4938 4939 /* 4940 * HPRT0_SPD_HIGH_SPEED: high speed 4941 * HPRT0_SPD_FULL_SPEED: full speed 4942 */ 4943 static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed) 4944 { 4945 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4946 4947 if (hsotg->params.speed == speed) 4948 return; 4949 4950 hsotg->params.speed = speed; 4951 queue_work(hsotg->wq_otg, &hsotg->wf_otg); 4952 } 4953 4954 static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev) 4955 { 4956 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4957 4958 if (!hsotg->params.change_speed_quirk) 4959 return; 4960 4961 /* 4962 * On removal, set speed to default high-speed. 4963 */ 4964 if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN && 4965 udev->parent->speed < USB_SPEED_HIGH) { 4966 dev_info(hsotg->dev, "Set speed to default high-speed\n"); 4967 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4968 } 4969 } 4970 4971 static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev) 4972 { 4973 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); 4974 4975 if (!hsotg->params.change_speed_quirk) 4976 return 0; 4977 4978 if (udev->speed == USB_SPEED_HIGH) { 4979 dev_info(hsotg->dev, "Set speed to high-speed\n"); 4980 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); 4981 } else if ((udev->speed == USB_SPEED_FULL || 4982 udev->speed == USB_SPEED_LOW)) { 4983 /* 4984 * Change speed setting to full-speed if there's 4985 * a full-speed or low-speed device plugged in. 4986 */ 4987 dev_info(hsotg->dev, "Set speed to full-speed\n"); 4988 dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED); 4989 } 4990 4991 return 0; 4992 } 4993 4994 static struct hc_driver dwc2_hc_driver = { 4995 .description = "dwc2_hsotg", 4996 .product_desc = "DWC OTG Controller", 4997 .hcd_priv_size = sizeof(struct wrapper_priv_data), 4998 4999 .irq = _dwc2_hcd_irq, 5000 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, 5001 5002 .start = _dwc2_hcd_start, 5003 .stop = _dwc2_hcd_stop, 5004 .urb_enqueue = _dwc2_hcd_urb_enqueue, 5005 .urb_dequeue = _dwc2_hcd_urb_dequeue, 5006 .endpoint_disable = _dwc2_hcd_endpoint_disable, 5007 .endpoint_reset = _dwc2_hcd_endpoint_reset, 5008 .get_frame_number = _dwc2_hcd_get_frame_number, 5009 5010 .hub_status_data = _dwc2_hcd_hub_status_data, 5011 .hub_control = _dwc2_hcd_hub_control, 5012 .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, 5013 5014 .bus_suspend = _dwc2_hcd_suspend, 5015 .bus_resume = _dwc2_hcd_resume, 5016 5017 .map_urb_for_dma = dwc2_map_urb_for_dma, 5018 .unmap_urb_for_dma = dwc2_unmap_urb_for_dma, 5019 }; 5020 5021 /* 5022 * Frees secondary storage associated with the dwc2_hsotg structure contained 5023 * in the struct usb_hcd field 5024 */ 5025 static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) 5026 { 5027 u32 ahbcfg; 5028 u32 dctl; 5029 int i; 5030 5031 dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); 5032 5033 /* Free memory for QH/QTD lists */ 5034 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); 5035 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting); 5036 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); 5037 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); 5038 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); 5039 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); 5040 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); 5041 5042 /* Free memory for the host channels */ 5043 for (i = 0; i < MAX_EPS_CHANNELS; i++) { 5044 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; 5045 5046 if (chan) { 5047 dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", 5048 i, chan); 5049 hsotg->hc_ptr_array[i] = NULL; 5050 kfree(chan); 5051 } 5052 } 5053 5054 if (hsotg->params.host_dma) { 5055 if (hsotg->status_buf) { 5056 dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, 5057 hsotg->status_buf, 5058 hsotg->status_buf_dma); 5059 hsotg->status_buf = NULL; 5060 } 5061 } else { 5062 kfree(hsotg->status_buf); 5063 hsotg->status_buf = NULL; 5064 } 5065 5066 ahbcfg = dwc2_readl(hsotg, GAHBCFG); 5067 5068 /* Disable all interrupts */ 5069 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; 5070 dwc2_writel(hsotg, ahbcfg, GAHBCFG); 5071 dwc2_writel(hsotg, 0, GINTMSK); 5072 5073 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { 5074 dctl = dwc2_readl(hsotg, DCTL); 5075 dctl |= DCTL_SFTDISCON; 5076 dwc2_writel(hsotg, dctl, DCTL); 5077 } 5078 5079 if (hsotg->wq_otg) { 5080 if (!cancel_work_sync(&hsotg->wf_otg)) 5081 flush_workqueue(hsotg->wq_otg); 5082 destroy_workqueue(hsotg->wq_otg); 5083 } 5084 5085 cancel_work_sync(&hsotg->phy_reset_work); 5086 5087 del_timer(&hsotg->wkp_timer); 5088 } 5089 5090 static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) 5091 { 5092 /* Turn off all host-specific interrupts */ 5093 dwc2_disable_host_interrupts(hsotg); 5094 5095 dwc2_hcd_free(hsotg); 5096 } 5097 5098 /* 5099 * Initializes the HCD. This function allocates memory for and initializes the 5100 * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the 5101 * USB bus with the core and calls the hc_driver->start() function. It returns 5102 * a negative error on failure. 5103 */ 5104 int dwc2_hcd_init(struct dwc2_hsotg *hsotg) 5105 { 5106 struct platform_device *pdev = to_platform_device(hsotg->dev); 5107 struct resource *res; 5108 struct usb_hcd *hcd; 5109 struct dwc2_host_chan *channel; 5110 u32 hcfg; 5111 int i, num_channels; 5112 int retval; 5113 5114 if (usb_disabled()) 5115 return -ENODEV; 5116 5117 dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); 5118 5119 retval = -ENOMEM; 5120 5121 hcfg = dwc2_readl(hsotg, HCFG); 5122 dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); 5123 5124 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5125 hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE, 5126 sizeof(*hsotg->frame_num_array), 5127 GFP_KERNEL); 5128 if (!hsotg->frame_num_array) 5129 goto error1; 5130 hsotg->last_frame_num_array = 5131 kcalloc(FRAME_NUM_ARRAY_SIZE, 5132 sizeof(*hsotg->last_frame_num_array), GFP_KERNEL); 5133 if (!hsotg->last_frame_num_array) 5134 goto error1; 5135 #endif 5136 hsotg->last_frame_num = HFNUM_MAX_FRNUM; 5137 5138 /* Check if the bus driver or platform code has setup a dma_mask */ 5139 if (hsotg->params.host_dma && 5140 !hsotg->dev->dma_mask) { 5141 dev_warn(hsotg->dev, 5142 "dma_mask not set, disabling DMA\n"); 5143 hsotg->params.host_dma = false; 5144 hsotg->params.dma_desc_enable = false; 5145 } 5146 5147 /* Set device flags indicating whether the HCD supports DMA */ 5148 if (hsotg->params.host_dma) { 5149 if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5150 dev_warn(hsotg->dev, "can't set DMA mask\n"); 5151 if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) 5152 dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); 5153 } 5154 5155 if (hsotg->params.change_speed_quirk) { 5156 dwc2_hc_driver.free_dev = dwc2_free_dev; 5157 dwc2_hc_driver.reset_device = dwc2_reset_device; 5158 } 5159 5160 if (hsotg->params.host_dma) 5161 dwc2_hc_driver.flags |= HCD_DMA; 5162 5163 hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); 5164 if (!hcd) 5165 goto error1; 5166 5167 hcd->has_tt = 1; 5168 5169 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 5170 if (!res) { 5171 retval = -EINVAL; 5172 goto error2; 5173 } 5174 hcd->rsrc_start = res->start; 5175 hcd->rsrc_len = resource_size(res); 5176 5177 ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg; 5178 hsotg->priv = hcd; 5179 5180 /* 5181 * Disable the global interrupt until all the interrupt handlers are 5182 * installed 5183 */ 5184 dwc2_disable_global_interrupts(hsotg); 5185 5186 /* Initialize the DWC_otg core, and select the Phy type */ 5187 retval = dwc2_core_init(hsotg, true); 5188 if (retval) 5189 goto error2; 5190 5191 /* Create new workqueue and init work */ 5192 retval = -ENOMEM; 5193 hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0); 5194 if (!hsotg->wq_otg) { 5195 dev_err(hsotg->dev, "Failed to create workqueue\n"); 5196 goto error2; 5197 } 5198 INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); 5199 5200 timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0); 5201 5202 /* Initialize the non-periodic schedule */ 5203 INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); 5204 INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting); 5205 INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); 5206 5207 /* Initialize the periodic schedule */ 5208 INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); 5209 INIT_LIST_HEAD(&hsotg->periodic_sched_ready); 5210 INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); 5211 INIT_LIST_HEAD(&hsotg->periodic_sched_queued); 5212 5213 INIT_LIST_HEAD(&hsotg->split_order); 5214 5215 /* 5216 * Create a host channel descriptor for each host channel implemented 5217 * in the controller. Initialize the channel descriptor array. 5218 */ 5219 INIT_LIST_HEAD(&hsotg->free_hc_list); 5220 num_channels = hsotg->params.host_channels; 5221 memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); 5222 5223 for (i = 0; i < num_channels; i++) { 5224 channel = kzalloc(sizeof(*channel), GFP_KERNEL); 5225 if (!channel) 5226 goto error3; 5227 channel->hc_num = i; 5228 INIT_LIST_HEAD(&channel->split_order_list_entry); 5229 hsotg->hc_ptr_array[i] = channel; 5230 } 5231 5232 /* Initialize work */ 5233 INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); 5234 INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); 5235 INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func); 5236 5237 /* 5238 * Allocate space for storing data on status transactions. Normally no 5239 * data is sent, but this space acts as a bit bucket. This must be 5240 * done after usb_add_hcd since that function allocates the DMA buffer 5241 * pool. 5242 */ 5243 if (hsotg->params.host_dma) 5244 hsotg->status_buf = dma_alloc_coherent(hsotg->dev, 5245 DWC2_HCD_STATUS_BUF_SIZE, 5246 &hsotg->status_buf_dma, GFP_KERNEL); 5247 else 5248 hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, 5249 GFP_KERNEL); 5250 5251 if (!hsotg->status_buf) 5252 goto error3; 5253 5254 /* 5255 * Create kmem caches to handle descriptor buffers in descriptor 5256 * DMA mode. 5257 * Alignment must be set to 512 bytes. 5258 */ 5259 if (hsotg->params.dma_desc_enable || 5260 hsotg->params.dma_desc_fs_enable) { 5261 hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc", 5262 sizeof(struct dwc2_dma_desc) * 5263 MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA, 5264 NULL); 5265 if (!hsotg->desc_gen_cache) { 5266 dev_err(hsotg->dev, 5267 "unable to create dwc2 generic desc cache\n"); 5268 5269 /* 5270 * Disable descriptor dma mode since it will not be 5271 * usable. 5272 */ 5273 hsotg->params.dma_desc_enable = false; 5274 hsotg->params.dma_desc_fs_enable = false; 5275 } 5276 5277 hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc", 5278 sizeof(struct dwc2_dma_desc) * 5279 MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL); 5280 if (!hsotg->desc_hsisoc_cache) { 5281 dev_err(hsotg->dev, 5282 "unable to create dwc2 hs isoc desc cache\n"); 5283 5284 kmem_cache_destroy(hsotg->desc_gen_cache); 5285 5286 /* 5287 * Disable descriptor dma mode since it will not be 5288 * usable. 5289 */ 5290 hsotg->params.dma_desc_enable = false; 5291 hsotg->params.dma_desc_fs_enable = false; 5292 } 5293 } 5294 5295 if (hsotg->params.host_dma) { 5296 /* 5297 * Create kmem caches to handle non-aligned buffer 5298 * in Buffer DMA mode. 5299 */ 5300 hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", 5301 DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, 5302 SLAB_CACHE_DMA, NULL); 5303 if (!hsotg->unaligned_cache) 5304 dev_err(hsotg->dev, 5305 "unable to create dwc2 unaligned cache\n"); 5306 } 5307 5308 hsotg->otg_port = 1; 5309 hsotg->frame_list = NULL; 5310 hsotg->frame_list_dma = 0; 5311 hsotg->periodic_qh_count = 0; 5312 5313 /* Initiate lx_state to L3 disconnected state */ 5314 hsotg->lx_state = DWC2_L3; 5315 5316 hcd->self.otg_port = hsotg->otg_port; 5317 5318 /* Don't support SG list at this point */ 5319 hcd->self.sg_tablesize = 0; 5320 5321 hcd->tpl_support = of_usb_host_tpl_support(hsotg->dev->of_node); 5322 5323 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5324 otg_set_host(hsotg->uphy->otg, &hcd->self); 5325 5326 /* 5327 * Finish generic HCD initialization and start the HCD. This function 5328 * allocates the DMA buffer pool, registers the USB bus, requests the 5329 * IRQ line, and calls hcd_start method. 5330 */ 5331 retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED); 5332 if (retval < 0) 5333 goto error4; 5334 5335 device_wakeup_enable(hcd->self.controller); 5336 5337 dwc2_hcd_dump_state(hsotg); 5338 5339 dwc2_enable_global_interrupts(hsotg); 5340 5341 return 0; 5342 5343 error4: 5344 kmem_cache_destroy(hsotg->unaligned_cache); 5345 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5346 kmem_cache_destroy(hsotg->desc_gen_cache); 5347 error3: 5348 dwc2_hcd_release(hsotg); 5349 error2: 5350 usb_put_hcd(hcd); 5351 error1: 5352 5353 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5354 kfree(hsotg->last_frame_num_array); 5355 kfree(hsotg->frame_num_array); 5356 #endif 5357 5358 dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); 5359 return retval; 5360 } 5361 5362 /* 5363 * Removes the HCD. 5364 * Frees memory and resources associated with the HCD and deregisters the bus. 5365 */ 5366 void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) 5367 { 5368 struct usb_hcd *hcd; 5369 5370 dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); 5371 5372 hcd = dwc2_hsotg_to_hcd(hsotg); 5373 dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); 5374 5375 if (!hcd) { 5376 dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", 5377 __func__); 5378 return; 5379 } 5380 5381 if (!IS_ERR_OR_NULL(hsotg->uphy)) 5382 otg_set_host(hsotg->uphy->otg, NULL); 5383 5384 usb_remove_hcd(hcd); 5385 hsotg->priv = NULL; 5386 5387 kmem_cache_destroy(hsotg->unaligned_cache); 5388 kmem_cache_destroy(hsotg->desc_hsisoc_cache); 5389 kmem_cache_destroy(hsotg->desc_gen_cache); 5390 5391 dwc2_hcd_release(hsotg); 5392 usb_put_hcd(hcd); 5393 5394 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS 5395 kfree(hsotg->last_frame_num_array); 5396 kfree(hsotg->frame_num_array); 5397 #endif 5398 } 5399 5400 /** 5401 * dwc2_backup_host_registers() - Backup controller host registers. 5402 * When suspending usb bus, registers needs to be backuped 5403 * if controller power is disabled once suspended. 5404 * 5405 * @hsotg: Programming view of the DWC_otg controller 5406 */ 5407 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) 5408 { 5409 struct dwc2_hregs_backup *hr; 5410 int i; 5411 5412 dev_dbg(hsotg->dev, "%s\n", __func__); 5413 5414 /* Backup Host regs */ 5415 hr = &hsotg->hr_backup; 5416 hr->hcfg = dwc2_readl(hsotg, HCFG); 5417 hr->hflbaddr = dwc2_readl(hsotg, HFLBADDR); 5418 hr->haintmsk = dwc2_readl(hsotg, HAINTMSK); 5419 for (i = 0; i < hsotg->params.host_channels; ++i) { 5420 hr->hcchar[i] = dwc2_readl(hsotg, HCCHAR(i)); 5421 hr->hcsplt[i] = dwc2_readl(hsotg, HCSPLT(i)); 5422 hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i)); 5423 hr->hctsiz[i] = dwc2_readl(hsotg, HCTSIZ(i)); 5424 hr->hcidma[i] = dwc2_readl(hsotg, HCDMA(i)); 5425 hr->hcidmab[i] = dwc2_readl(hsotg, HCDMAB(i)); 5426 } 5427 5428 hr->hprt0 = dwc2_read_hprt0(hsotg); 5429 hr->hfir = dwc2_readl(hsotg, HFIR); 5430 hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); 5431 hr->valid = true; 5432 5433 return 0; 5434 } 5435 5436 /** 5437 * dwc2_restore_host_registers() - Restore controller host registers. 5438 * When resuming usb bus, device registers needs to be restored 5439 * if controller power were disabled. 5440 * 5441 * @hsotg: Programming view of the DWC_otg controller 5442 */ 5443 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) 5444 { 5445 struct dwc2_hregs_backup *hr; 5446 int i; 5447 5448 dev_dbg(hsotg->dev, "%s\n", __func__); 5449 5450 /* Restore host regs */ 5451 hr = &hsotg->hr_backup; 5452 if (!hr->valid) { 5453 dev_err(hsotg->dev, "%s: no host registers to restore\n", 5454 __func__); 5455 return -EINVAL; 5456 } 5457 hr->valid = false; 5458 5459 dwc2_writel(hsotg, hr->hcfg, HCFG); 5460 dwc2_writel(hsotg, hr->hflbaddr, HFLBADDR); 5461 dwc2_writel(hsotg, hr->haintmsk, HAINTMSK); 5462 5463 for (i = 0; i < hsotg->params.host_channels; ++i) { 5464 dwc2_writel(hsotg, hr->hcchar[i], HCCHAR(i)); 5465 dwc2_writel(hsotg, hr->hcsplt[i], HCSPLT(i)); 5466 dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i)); 5467 dwc2_writel(hsotg, hr->hctsiz[i], HCTSIZ(i)); 5468 dwc2_writel(hsotg, hr->hcidma[i], HCDMA(i)); 5469 dwc2_writel(hsotg, hr->hcidmab[i], HCDMAB(i)); 5470 } 5471 5472 dwc2_writel(hsotg, hr->hprt0, HPRT0); 5473 dwc2_writel(hsotg, hr->hfir, HFIR); 5474 dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ); 5475 hsotg->frame_number = 0; 5476 5477 return 0; 5478 } 5479 5480 /** 5481 * dwc2_host_enter_hibernation() - Put controller in Hibernation. 5482 * 5483 * @hsotg: Programming view of the DWC_otg controller 5484 */ 5485 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) 5486 { 5487 unsigned long flags; 5488 int ret = 0; 5489 u32 hprt0; 5490 u32 pcgcctl; 5491 u32 gusbcfg; 5492 u32 gpwrdn; 5493 5494 dev_dbg(hsotg->dev, "Preparing host for hibernation\n"); 5495 ret = dwc2_backup_global_registers(hsotg); 5496 if (ret) { 5497 dev_err(hsotg->dev, "%s: failed to backup global registers\n", 5498 __func__); 5499 return ret; 5500 } 5501 ret = dwc2_backup_host_registers(hsotg); 5502 if (ret) { 5503 dev_err(hsotg->dev, "%s: failed to backup host registers\n", 5504 __func__); 5505 return ret; 5506 } 5507 5508 /* Enter USB Suspend Mode */ 5509 hprt0 = dwc2_readl(hsotg, HPRT0); 5510 hprt0 |= HPRT0_SUSP; 5511 hprt0 &= ~HPRT0_ENA; 5512 dwc2_writel(hsotg, hprt0, HPRT0); 5513 5514 /* Wait for the HPRT0.PrtSusp register field to be set */ 5515 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000)) 5516 dev_warn(hsotg->dev, "Suspend wasn't generated\n"); 5517 5518 /* 5519 * We need to disable interrupts to prevent servicing of any IRQ 5520 * during going to hibernation 5521 */ 5522 spin_lock_irqsave(&hsotg->lock, flags); 5523 hsotg->lx_state = DWC2_L2; 5524 5525 gusbcfg = dwc2_readl(hsotg, GUSBCFG); 5526 if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) { 5527 /* ULPI interface */ 5528 udelay(10); 5529 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5530 gpwrdn |= GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY; 5531 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5532 udelay(10); 5533 /* Suspend the Phy Clock */ 5534 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5535 pcgcctl |= PCGCTL_STOPPCLK; 5536 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5537 udelay(10); 5538 5539 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5540 gpwrdn |= GPWRDN_PMUACTV; 5541 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5542 udelay(10); 5543 } else { 5544 /* UTMI+ Interface */ 5545 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5546 gpwrdn |= GPWRDN_PMUACTV; 5547 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5548 udelay(10); 5549 5550 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5551 pcgcctl |= PCGCTL_STOPPCLK; 5552 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5553 udelay(10); 5554 } 5555 5556 /* Enable interrupts from wake up logic */ 5557 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5558 gpwrdn |= GPWRDN_PMUINTSEL; 5559 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5560 udelay(10); 5561 5562 /* Unmask host mode interrupts in GPWRDN */ 5563 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5564 gpwrdn |= GPWRDN_DISCONN_DET_MSK; 5565 gpwrdn |= GPWRDN_LNSTSCHG_MSK; 5566 gpwrdn |= GPWRDN_STS_CHGINT_MSK; 5567 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5568 udelay(10); 5569 5570 /* Enable Power Down Clamp */ 5571 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5572 gpwrdn |= GPWRDN_PWRDNCLMP; 5573 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5574 udelay(10); 5575 5576 /* Switch off VDD */ 5577 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5578 gpwrdn |= GPWRDN_PWRDNSWTCH; 5579 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5580 5581 hsotg->hibernated = 1; 5582 hsotg->bus_suspended = 1; 5583 dev_dbg(hsotg->dev, "Host hibernation completed\n"); 5584 spin_unlock_irqrestore(&hsotg->lock, flags); 5585 return ret; 5586 } 5587 5588 /* 5589 * dwc2_host_exit_hibernation() 5590 * 5591 * @hsotg: Programming view of the DWC_otg controller 5592 * @rem_wakeup: indicates whether resume is initiated by Device or Host. 5593 * @param reset: indicates whether resume is initiated by Reset. 5594 * 5595 * Return: non-zero if failed to enter to hibernation. 5596 * 5597 * This function is for exiting from Host mode hibernation by 5598 * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. 5599 */ 5600 int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, 5601 int reset) 5602 { 5603 u32 gpwrdn; 5604 u32 hprt0; 5605 int ret = 0; 5606 struct dwc2_gregs_backup *gr; 5607 struct dwc2_hregs_backup *hr; 5608 5609 gr = &hsotg->gr_backup; 5610 hr = &hsotg->hr_backup; 5611 5612 dev_dbg(hsotg->dev, 5613 "%s: called with rem_wakeup = %d reset = %d\n", 5614 __func__, rem_wakeup, reset); 5615 5616 dwc2_hib_restore_common(hsotg, rem_wakeup, 1); 5617 hsotg->hibernated = 0; 5618 5619 /* 5620 * This step is not described in functional spec but if not wait for 5621 * this delay, mismatch interrupts occurred because just after restore 5622 * core is in Device mode(gintsts.curmode == 0) 5623 */ 5624 mdelay(100); 5625 5626 /* Clear all pending interupts */ 5627 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5628 5629 /* De-assert Restore */ 5630 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5631 gpwrdn &= ~GPWRDN_RESTORE; 5632 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5633 udelay(10); 5634 5635 /* Restore GUSBCFG, HCFG */ 5636 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); 5637 dwc2_writel(hsotg, hr->hcfg, HCFG); 5638 5639 /* Reset ULPI latch */ 5640 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5641 gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY; 5642 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5643 5644 /* De-assert Wakeup Logic */ 5645 if (!(rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) { 5646 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5647 gpwrdn &= ~GPWRDN_PMUACTV; 5648 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5649 udelay(10); 5650 } 5651 5652 hprt0 = hr->hprt0; 5653 hprt0 |= HPRT0_PWR; 5654 hprt0 &= ~HPRT0_ENA; 5655 hprt0 &= ~HPRT0_SUSP; 5656 dwc2_writel(hsotg, hprt0, HPRT0); 5657 5658 hprt0 = hr->hprt0; 5659 hprt0 |= HPRT0_PWR; 5660 hprt0 &= ~HPRT0_ENA; 5661 hprt0 &= ~HPRT0_SUSP; 5662 5663 if (reset) { 5664 hprt0 |= HPRT0_RST; 5665 dwc2_writel(hsotg, hprt0, HPRT0); 5666 5667 /* Wait for Resume time and then program HPRT again */ 5668 mdelay(60); 5669 hprt0 &= ~HPRT0_RST; 5670 dwc2_writel(hsotg, hprt0, HPRT0); 5671 } else { 5672 hprt0 |= HPRT0_RES; 5673 dwc2_writel(hsotg, hprt0, HPRT0); 5674 5675 /* De-assert Wakeup Logic */ 5676 if ((rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) { 5677 gpwrdn = dwc2_readl(hsotg, GPWRDN); 5678 gpwrdn &= ~GPWRDN_PMUACTV; 5679 dwc2_writel(hsotg, gpwrdn, GPWRDN); 5680 udelay(10); 5681 } 5682 /* Wait for Resume time and then program HPRT again */ 5683 mdelay(100); 5684 hprt0 &= ~HPRT0_RES; 5685 dwc2_writel(hsotg, hprt0, HPRT0); 5686 } 5687 /* Clear all interrupt status */ 5688 hprt0 = dwc2_readl(hsotg, HPRT0); 5689 hprt0 |= HPRT0_CONNDET; 5690 hprt0 |= HPRT0_ENACHG; 5691 hprt0 &= ~HPRT0_ENA; 5692 dwc2_writel(hsotg, hprt0, HPRT0); 5693 5694 hprt0 = dwc2_readl(hsotg, HPRT0); 5695 5696 /* Clear all pending interupts */ 5697 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5698 5699 /* Restore global registers */ 5700 ret = dwc2_restore_global_registers(hsotg); 5701 if (ret) { 5702 dev_err(hsotg->dev, "%s: failed to restore registers\n", 5703 __func__); 5704 return ret; 5705 } 5706 5707 /* Restore host registers */ 5708 ret = dwc2_restore_host_registers(hsotg); 5709 if (ret) { 5710 dev_err(hsotg->dev, "%s: failed to restore host registers\n", 5711 __func__); 5712 return ret; 5713 } 5714 5715 if (rem_wakeup) { 5716 dwc2_hcd_rem_wakeup(hsotg); 5717 /* 5718 * Change "port_connect_status_change" flag to re-enumerate, 5719 * because after exit from hibernation port connection status 5720 * is not detected. 5721 */ 5722 hsotg->flags.b.port_connect_status_change = 1; 5723 } 5724 5725 hsotg->hibernated = 0; 5726 hsotg->bus_suspended = 0; 5727 hsotg->lx_state = DWC2_L0; 5728 dev_dbg(hsotg->dev, "Host hibernation restore complete\n"); 5729 return ret; 5730 } 5731 5732 bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) 5733 { 5734 struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub; 5735 5736 /* If the controller isn't allowed to wakeup then we can power off. */ 5737 if (!device_may_wakeup(dwc2->dev)) 5738 return true; 5739 5740 /* 5741 * We don't want to power off the PHY if something under the 5742 * root hub has wakeup enabled. 5743 */ 5744 if (usb_wakeup_enabled_descendants(root_hub)) 5745 return false; 5746 5747 /* No reason to keep the PHY powered, so allow poweroff */ 5748 return true; 5749 } 5750 5751 /** 5752 * dwc2_host_enter_partial_power_down() - Put controller in partial 5753 * power down. 5754 * 5755 * @hsotg: Programming view of the DWC_otg controller 5756 * 5757 * Return: non-zero if failed to enter host partial power down. 5758 * 5759 * This function is for entering Host mode partial power down. 5760 */ 5761 int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg) 5762 { 5763 u32 pcgcctl; 5764 u32 hprt0; 5765 int ret = 0; 5766 5767 dev_dbg(hsotg->dev, "Entering host partial power down started.\n"); 5768 5769 /* Put this port in suspend mode. */ 5770 hprt0 = dwc2_read_hprt0(hsotg); 5771 hprt0 |= HPRT0_SUSP; 5772 dwc2_writel(hsotg, hprt0, HPRT0); 5773 udelay(5); 5774 5775 /* Wait for the HPRT0.PrtSusp register field to be set */ 5776 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) 5777 dev_warn(hsotg->dev, "Suspend wasn't generated\n"); 5778 5779 /* Backup all registers */ 5780 ret = dwc2_backup_global_registers(hsotg); 5781 if (ret) { 5782 dev_err(hsotg->dev, "%s: failed to backup global registers\n", 5783 __func__); 5784 return ret; 5785 } 5786 5787 ret = dwc2_backup_host_registers(hsotg); 5788 if (ret) { 5789 dev_err(hsotg->dev, "%s: failed to backup host registers\n", 5790 __func__); 5791 return ret; 5792 } 5793 5794 /* 5795 * Clear any pending interrupts since dwc2 will not be able to 5796 * clear them after entering partial_power_down. 5797 */ 5798 dwc2_writel(hsotg, 0xffffffff, GINTSTS); 5799 5800 /* Put the controller in low power state */ 5801 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5802 5803 pcgcctl |= PCGCTL_PWRCLMP; 5804 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5805 udelay(5); 5806 5807 pcgcctl |= PCGCTL_RSTPDWNMODULE; 5808 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5809 udelay(5); 5810 5811 pcgcctl |= PCGCTL_STOPPCLK; 5812 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5813 5814 /* Set in_ppd flag to 1 as here core enters suspend. */ 5815 hsotg->in_ppd = 1; 5816 hsotg->lx_state = DWC2_L2; 5817 hsotg->bus_suspended = true; 5818 5819 dev_dbg(hsotg->dev, "Entering host partial power down completed.\n"); 5820 5821 return ret; 5822 } 5823 5824 /* 5825 * dwc2_host_exit_partial_power_down() - Exit controller from host partial 5826 * power down. 5827 * 5828 * @hsotg: Programming view of the DWC_otg controller 5829 * @rem_wakeup: indicates whether resume is initiated by Reset. 5830 * @restore: indicates whether need to restore the registers or not. 5831 * 5832 * Return: non-zero if failed to exit host partial power down. 5833 * 5834 * This function is for exiting from Host mode partial power down. 5835 */ 5836 int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg, 5837 int rem_wakeup, bool restore) 5838 { 5839 u32 pcgcctl; 5840 int ret = 0; 5841 u32 hprt0; 5842 5843 dev_dbg(hsotg->dev, "Exiting host partial power down started.\n"); 5844 5845 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5846 pcgcctl &= ~PCGCTL_STOPPCLK; 5847 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5848 udelay(5); 5849 5850 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5851 pcgcctl &= ~PCGCTL_PWRCLMP; 5852 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5853 udelay(5); 5854 5855 pcgcctl = dwc2_readl(hsotg, PCGCTL); 5856 pcgcctl &= ~PCGCTL_RSTPDWNMODULE; 5857 dwc2_writel(hsotg, pcgcctl, PCGCTL); 5858 5859 udelay(100); 5860 if (restore) { 5861 ret = dwc2_restore_global_registers(hsotg); 5862 if (ret) { 5863 dev_err(hsotg->dev, "%s: failed to restore registers\n", 5864 __func__); 5865 return ret; 5866 } 5867 5868 ret = dwc2_restore_host_registers(hsotg); 5869 if (ret) { 5870 dev_err(hsotg->dev, "%s: failed to restore host registers\n", 5871 __func__); 5872 return ret; 5873 } 5874 } 5875 5876 /* Drive resume signaling and exit suspend mode on the port. */ 5877 hprt0 = dwc2_read_hprt0(hsotg); 5878 hprt0 |= HPRT0_RES; 5879 hprt0 &= ~HPRT0_SUSP; 5880 dwc2_writel(hsotg, hprt0, HPRT0); 5881 udelay(5); 5882 5883 if (!rem_wakeup) { 5884 /* Stop driveing resume signaling on the port. */ 5885 hprt0 = dwc2_read_hprt0(hsotg); 5886 hprt0 &= ~HPRT0_RES; 5887 dwc2_writel(hsotg, hprt0, HPRT0); 5888 5889 hsotg->bus_suspended = false; 5890 } else { 5891 /* Turn on the port power bit. */ 5892 hprt0 = dwc2_read_hprt0(hsotg); 5893 hprt0 |= HPRT0_PWR; 5894 dwc2_writel(hsotg, hprt0, HPRT0); 5895 5896 /* Connect hcd. */ 5897 dwc2_hcd_connect(hsotg); 5898 5899 mod_timer(&hsotg->wkp_timer, 5900 jiffies + msecs_to_jiffies(71)); 5901 } 5902 5903 /* Set lx_state to and in_ppd to 0 as here core exits from suspend. */ 5904 hsotg->in_ppd = 0; 5905 hsotg->lx_state = DWC2_L0; 5906 5907 dev_dbg(hsotg->dev, "Exiting host partial power down completed.\n"); 5908 return ret; 5909 } 5910 5911 /** 5912 * dwc2_host_enter_clock_gating() - Put controller in clock gating. 5913 * 5914 * @hsotg: Programming view of the DWC_otg controller 5915 * 5916 * This function is for entering Host mode clock gating. 5917 */ 5918 void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg) 5919 { 5920 u32 hprt0; 5921 u32 pcgctl; 5922 5923 dev_dbg(hsotg->dev, "Entering host clock gating.\n"); 5924 5925 /* Put this port in suspend mode. */ 5926 hprt0 = dwc2_read_hprt0(hsotg); 5927 hprt0 |= HPRT0_SUSP; 5928 dwc2_writel(hsotg, hprt0, HPRT0); 5929 5930 /* Set the Phy Clock bit as suspend is received. */ 5931 pcgctl = dwc2_readl(hsotg, PCGCTL); 5932 pcgctl |= PCGCTL_STOPPCLK; 5933 dwc2_writel(hsotg, pcgctl, PCGCTL); 5934 udelay(5); 5935 5936 /* Set the Gate hclk as suspend is received. */ 5937 pcgctl = dwc2_readl(hsotg, PCGCTL); 5938 pcgctl |= PCGCTL_GATEHCLK; 5939 dwc2_writel(hsotg, pcgctl, PCGCTL); 5940 udelay(5); 5941 5942 hsotg->bus_suspended = true; 5943 hsotg->lx_state = DWC2_L2; 5944 } 5945 5946 /** 5947 * dwc2_host_exit_clock_gating() - Exit controller from clock gating. 5948 * 5949 * @hsotg: Programming view of the DWC_otg controller 5950 * @rem_wakeup: indicates whether resume is initiated by remote wakeup 5951 * 5952 * This function is for exiting Host mode clock gating. 5953 */ 5954 void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup) 5955 { 5956 u32 hprt0; 5957 u32 pcgctl; 5958 5959 dev_dbg(hsotg->dev, "Exiting host clock gating.\n"); 5960 5961 /* Clear the Gate hclk. */ 5962 pcgctl = dwc2_readl(hsotg, PCGCTL); 5963 pcgctl &= ~PCGCTL_GATEHCLK; 5964 dwc2_writel(hsotg, pcgctl, PCGCTL); 5965 udelay(5); 5966 5967 /* Phy Clock bit. */ 5968 pcgctl = dwc2_readl(hsotg, PCGCTL); 5969 pcgctl &= ~PCGCTL_STOPPCLK; 5970 dwc2_writel(hsotg, pcgctl, PCGCTL); 5971 udelay(5); 5972 5973 /* Drive resume signaling and exit suspend mode on the port. */ 5974 hprt0 = dwc2_read_hprt0(hsotg); 5975 hprt0 |= HPRT0_RES; 5976 hprt0 &= ~HPRT0_SUSP; 5977 dwc2_writel(hsotg, hprt0, HPRT0); 5978 udelay(5); 5979 5980 if (!rem_wakeup) { 5981 /* In case of port resume need to wait for 40 ms */ 5982 msleep(USB_RESUME_TIMEOUT); 5983 5984 /* Stop driveing resume signaling on the port. */ 5985 hprt0 = dwc2_read_hprt0(hsotg); 5986 hprt0 &= ~HPRT0_RES; 5987 dwc2_writel(hsotg, hprt0, HPRT0); 5988 5989 hsotg->bus_suspended = false; 5990 hsotg->lx_state = DWC2_L0; 5991 } else { 5992 mod_timer(&hsotg->wkp_timer, 5993 jiffies + msecs_to_jiffies(71)); 5994 } 5995 } 5996