xref: /linux/drivers/usb/core/hcd-pci.c (revision 60e13231561b3a4c5269bfa1ef6c0569ad6f28ec)
1 /*
2  * (C) Copyright David Brownell 2000-2002
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the
6  * Free Software Foundation; either version 2 of the License, or (at your
7  * option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
12  * for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software Foundation,
16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17  */
18 
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/pci.h>
22 #include <linux/usb.h>
23 #include <linux/usb/hcd.h>
24 
25 #include <asm/io.h>
26 #include <asm/irq.h>
27 
28 #ifdef CONFIG_PPC_PMAC
29 #include <asm/machdep.h>
30 #include <asm/pmac_feature.h>
31 #include <asm/pci-bridge.h>
32 #include <asm/prom.h>
33 #endif
34 
35 #include "usb.h"
36 
37 
38 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
39 
40 #ifdef CONFIG_PM_SLEEP
41 
42 /* Coordinate handoffs between EHCI and companion controllers
43  * during system resume
44  */
45 
46 static DEFINE_MUTEX(companions_mutex);
47 
48 #define CL_UHCI		PCI_CLASS_SERIAL_USB_UHCI
49 #define CL_OHCI		PCI_CLASS_SERIAL_USB_OHCI
50 #define CL_EHCI		PCI_CLASS_SERIAL_USB_EHCI
51 
52 enum companion_action {
53 	SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS
54 };
55 
56 static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd,
57 		enum companion_action action)
58 {
59 	struct pci_dev		*companion;
60 	struct usb_hcd		*companion_hcd;
61 	unsigned int		slot = PCI_SLOT(pdev->devfn);
62 
63 	/* Iterate through other PCI functions in the same slot.
64 	 * If pdev is OHCI or UHCI then we are looking for EHCI, and
65 	 * vice versa.
66 	 */
67 	companion = NULL;
68 	for_each_pci_dev(companion) {
69 		if (companion->bus != pdev->bus ||
70 				PCI_SLOT(companion->devfn) != slot)
71 			continue;
72 
73 		companion_hcd = pci_get_drvdata(companion);
74 		if (!companion_hcd)
75 			continue;
76 
77 		/* For SET_HS_COMPANION, store a pointer to the EHCI bus in
78 		 * the OHCI/UHCI companion bus structure.
79 		 * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus
80 		 * in the OHCI/UHCI companion bus structure.
81 		 * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI
82 		 * companion controllers have fully resumed.
83 		 */
84 
85 		if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) &&
86 				companion->class == CL_EHCI) {
87 			/* action must be SET_HS_COMPANION */
88 			dev_dbg(&companion->dev, "HS companion for %s\n",
89 					dev_name(&pdev->dev));
90 			hcd->self.hs_companion = &companion_hcd->self;
91 
92 		} else if (pdev->class == CL_EHCI &&
93 				(companion->class == CL_OHCI ||
94 				companion->class == CL_UHCI)) {
95 			switch (action) {
96 			case SET_HS_COMPANION:
97 				dev_dbg(&pdev->dev, "HS companion for %s\n",
98 						dev_name(&companion->dev));
99 				companion_hcd->self.hs_companion = &hcd->self;
100 				break;
101 			case CLEAR_HS_COMPANION:
102 				companion_hcd->self.hs_companion = NULL;
103 				break;
104 			case WAIT_FOR_COMPANIONS:
105 				device_pm_wait_for_dev(&pdev->dev,
106 						&companion->dev);
107 				break;
108 			}
109 		}
110 	}
111 }
112 
113 static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd)
114 {
115 	mutex_lock(&companions_mutex);
116 	dev_set_drvdata(&pdev->dev, hcd);
117 	companion_common(pdev, hcd, SET_HS_COMPANION);
118 	mutex_unlock(&companions_mutex);
119 }
120 
121 static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd)
122 {
123 	mutex_lock(&companions_mutex);
124 	dev_set_drvdata(&pdev->dev, NULL);
125 
126 	/* If pdev is OHCI or UHCI, just clear its hs_companion pointer */
127 	if (pdev->class == CL_OHCI || pdev->class == CL_UHCI)
128 		hcd->self.hs_companion = NULL;
129 
130 	/* Otherwise search for companion buses and clear their pointers */
131 	else
132 		companion_common(pdev, hcd, CLEAR_HS_COMPANION);
133 	mutex_unlock(&companions_mutex);
134 }
135 
136 static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd)
137 {
138 	/* Only EHCI controllers need to wait.
139 	 * No locking is needed because a controller cannot be resumed
140 	 * while one of its companions is getting unbound.
141 	 */
142 	if (pdev->class == CL_EHCI)
143 		companion_common(pdev, hcd, WAIT_FOR_COMPANIONS);
144 }
145 
146 #else /* !CONFIG_PM_SLEEP */
147 
148 static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {}
149 static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {}
150 static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {}
151 
152 #endif /* !CONFIG_PM_SLEEP */
153 
154 /*-------------------------------------------------------------------------*/
155 
156 /* configure so an HC device and id are always provided */
157 /* always called with process context; sleeping is OK */
158 
159 /**
160  * usb_hcd_pci_probe - initialize PCI-based HCDs
161  * @dev: USB Host Controller being probed
162  * @id: pci hotplug id connecting controller to HCD framework
163  * Context: !in_interrupt()
164  *
165  * Allocates basic PCI resources for this USB host controller, and
166  * then invokes the start() method for the HCD associated with it
167  * through the hotplug entry's driver_data.
168  *
169  * Store this function in the HCD's struct pci_driver as probe().
170  */
171 int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
172 {
173 	struct hc_driver	*driver;
174 	struct usb_hcd		*hcd;
175 	int			retval;
176 
177 	if (usb_disabled())
178 		return -ENODEV;
179 
180 	if (!id)
181 		return -EINVAL;
182 	driver = (struct hc_driver *)id->driver_data;
183 	if (!driver)
184 		return -EINVAL;
185 
186 	if (pci_enable_device(dev) < 0)
187 		return -ENODEV;
188 	dev->current_state = PCI_D0;
189 
190 	if (!dev->irq) {
191 		dev_err(&dev->dev,
192 			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
193 			pci_name(dev));
194 		retval = -ENODEV;
195 		goto disable_pci;
196 	}
197 
198 	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
199 	if (!hcd) {
200 		retval = -ENOMEM;
201 		goto disable_pci;
202 	}
203 
204 	if (driver->flags & HCD_MEMORY) {
205 		/* EHCI, OHCI */
206 		hcd->rsrc_start = pci_resource_start(dev, 0);
207 		hcd->rsrc_len = pci_resource_len(dev, 0);
208 		if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
209 				driver->description)) {
210 			dev_dbg(&dev->dev, "controller already in use\n");
211 			retval = -EBUSY;
212 			goto clear_companion;
213 		}
214 		hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
215 		if (hcd->regs == NULL) {
216 			dev_dbg(&dev->dev, "error mapping memory\n");
217 			retval = -EFAULT;
218 			goto release_mem_region;
219 		}
220 
221 	} else {
222 		/* UHCI */
223 		int	region;
224 
225 		for (region = 0; region < PCI_ROM_RESOURCE; region++) {
226 			if (!(pci_resource_flags(dev, region) &
227 					IORESOURCE_IO))
228 				continue;
229 
230 			hcd->rsrc_start = pci_resource_start(dev, region);
231 			hcd->rsrc_len = pci_resource_len(dev, region);
232 			if (request_region(hcd->rsrc_start, hcd->rsrc_len,
233 					driver->description))
234 				break;
235 		}
236 		if (region == PCI_ROM_RESOURCE) {
237 			dev_dbg(&dev->dev, "no i/o regions available\n");
238 			retval = -EBUSY;
239 			goto clear_companion;
240 		}
241 	}
242 
243 	pci_set_master(dev);
244 
245 	retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
246 	if (retval != 0)
247 		goto unmap_registers;
248 	set_hs_companion(dev, hcd);
249 
250 	if (pci_dev_run_wake(dev))
251 		pm_runtime_put_noidle(&dev->dev);
252 	return retval;
253 
254 unmap_registers:
255 	if (driver->flags & HCD_MEMORY) {
256 		iounmap(hcd->regs);
257 release_mem_region:
258 		release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
259 	} else
260 		release_region(hcd->rsrc_start, hcd->rsrc_len);
261 clear_companion:
262 	clear_hs_companion(dev, hcd);
263 	usb_put_hcd(hcd);
264 disable_pci:
265 	pci_disable_device(dev);
266 	dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
267 	return retval;
268 }
269 EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
270 
271 
272 /* may be called without controller electrically present */
273 /* may be called with controller, bus, and devices active */
274 
275 /**
276  * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
277  * @dev: USB Host Controller being removed
278  * Context: !in_interrupt()
279  *
280  * Reverses the effect of usb_hcd_pci_probe(), first invoking
281  * the HCD's stop() method.  It is always called from a thread
282  * context, normally "rmmod", "apmd", or something similar.
283  *
284  * Store this function in the HCD's struct pci_driver as remove().
285  */
286 void usb_hcd_pci_remove(struct pci_dev *dev)
287 {
288 	struct usb_hcd		*hcd;
289 
290 	hcd = pci_get_drvdata(dev);
291 	if (!hcd)
292 		return;
293 
294 	if (pci_dev_run_wake(dev))
295 		pm_runtime_get_noresume(&dev->dev);
296 
297 	/* Fake an interrupt request in order to give the driver a chance
298 	 * to test whether the controller hardware has been removed (e.g.,
299 	 * cardbus physical eject).
300 	 */
301 	local_irq_disable();
302 	usb_hcd_irq(0, hcd);
303 	local_irq_enable();
304 
305 	usb_remove_hcd(hcd);
306 	if (hcd->driver->flags & HCD_MEMORY) {
307 		iounmap(hcd->regs);
308 		release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
309 	} else {
310 		release_region(hcd->rsrc_start, hcd->rsrc_len);
311 	}
312 	clear_hs_companion(dev, hcd);
313 	usb_put_hcd(hcd);
314 	pci_disable_device(dev);
315 }
316 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
317 
318 /**
319  * usb_hcd_pci_shutdown - shutdown host controller
320  * @dev: USB Host Controller being shutdown
321  */
322 void usb_hcd_pci_shutdown(struct pci_dev *dev)
323 {
324 	struct usb_hcd		*hcd;
325 
326 	hcd = pci_get_drvdata(dev);
327 	if (!hcd)
328 		return;
329 
330 	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
331 			hcd->driver->shutdown) {
332 		hcd->driver->shutdown(hcd);
333 		pci_disable_device(dev);
334 	}
335 }
336 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
337 
338 #ifdef	CONFIG_PM
339 
340 #ifdef	CONFIG_PPC_PMAC
341 static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
342 {
343 	/* Enanble or disable ASIC clocks for USB */
344 	if (machine_is(powermac)) {
345 		struct device_node	*of_node;
346 
347 		of_node = pci_device_to_OF_node(pci_dev);
348 		if (of_node)
349 			pmac_call_feature(PMAC_FTR_USB_ENABLE,
350 					of_node, 0, enable);
351 	}
352 }
353 
354 #else
355 
356 static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
357 {}
358 
359 #endif	/* CONFIG_PPC_PMAC */
360 
361 static int check_root_hub_suspended(struct device *dev)
362 {
363 	struct pci_dev		*pci_dev = to_pci_dev(dev);
364 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
365 
366 	if (HCD_RH_RUNNING(hcd)) {
367 		dev_warn(dev, "Root hub is not suspended\n");
368 		return -EBUSY;
369 	}
370 	if (hcd->shared_hcd) {
371 		hcd = hcd->shared_hcd;
372 		if (HCD_RH_RUNNING(hcd)) {
373 			dev_warn(dev, "Secondary root hub is not suspended\n");
374 			return -EBUSY;
375 		}
376 	}
377 	return 0;
378 }
379 
380 static int suspend_common(struct device *dev, bool do_wakeup)
381 {
382 	struct pci_dev		*pci_dev = to_pci_dev(dev);
383 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
384 	int			retval;
385 
386 	/* Root hub suspend should have stopped all downstream traffic,
387 	 * and all bus master traffic.  And done so for both the interface
388 	 * and the stub usb_device (which we check here).  But maybe it
389 	 * didn't; writing sysfs power/state files ignores such rules...
390 	 */
391 	retval = check_root_hub_suspended(dev);
392 	if (retval)
393 		return retval;
394 
395 	if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
396 		/* Optimization: Don't suspend if a root-hub wakeup is
397 		 * pending and it would cause the HCD to wake up anyway.
398 		 */
399 		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
400 			return -EBUSY;
401 		if (do_wakeup && hcd->shared_hcd &&
402 				HCD_WAKEUP_PENDING(hcd->shared_hcd))
403 			return -EBUSY;
404 		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
405 		suspend_report_result(hcd->driver->pci_suspend, retval);
406 
407 		/* Check again in case wakeup raced with pci_suspend */
408 		if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
409 				(retval == 0 && do_wakeup && hcd->shared_hcd &&
410 				 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
411 			if (hcd->driver->pci_resume)
412 				hcd->driver->pci_resume(hcd, false);
413 			retval = -EBUSY;
414 		}
415 		if (retval)
416 			return retval;
417 	}
418 
419 	/* If MSI-X is enabled, the driver will have synchronized all vectors
420 	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
421 	 * synchronized here.
422 	 */
423 	if (!hcd->msix_enabled)
424 		synchronize_irq(pci_dev->irq);
425 
426 	/* Downstream ports from this root hub should already be quiesced, so
427 	 * there will be no DMA activity.  Now we can shut down the upstream
428 	 * link (except maybe for PME# resume signaling).  We'll enter a
429 	 * low power state during suspend_noirq, if the hardware allows.
430 	 */
431 	pci_disable_device(pci_dev);
432 	return retval;
433 }
434 
435 static int resume_common(struct device *dev, int event)
436 {
437 	struct pci_dev		*pci_dev = to_pci_dev(dev);
438 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
439 	int			retval;
440 
441 	if (HCD_RH_RUNNING(hcd) ||
442 			(hcd->shared_hcd &&
443 			 HCD_RH_RUNNING(hcd->shared_hcd))) {
444 		dev_dbg(dev, "can't resume, not suspended!\n");
445 		return 0;
446 	}
447 
448 	retval = pci_enable_device(pci_dev);
449 	if (retval < 0) {
450 		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
451 		return retval;
452 	}
453 
454 	pci_set_master(pci_dev);
455 
456 	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
457 	if (hcd->shared_hcd)
458 		clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
459 
460 	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
461 		if (event != PM_EVENT_AUTO_RESUME)
462 			wait_for_companions(pci_dev, hcd);
463 
464 		retval = hcd->driver->pci_resume(hcd,
465 				event == PM_EVENT_RESTORE);
466 		if (retval) {
467 			dev_err(dev, "PCI post-resume error %d!\n", retval);
468 			if (hcd->shared_hcd)
469 				usb_hc_died(hcd->shared_hcd);
470 			usb_hc_died(hcd);
471 		}
472 	}
473 	return retval;
474 }
475 
476 #ifdef	CONFIG_PM_SLEEP
477 
478 static int hcd_pci_suspend(struct device *dev)
479 {
480 	return suspend_common(dev, device_may_wakeup(dev));
481 }
482 
483 static int hcd_pci_suspend_noirq(struct device *dev)
484 {
485 	struct pci_dev		*pci_dev = to_pci_dev(dev);
486 	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
487 	int			retval;
488 
489 	retval = check_root_hub_suspended(dev);
490 	if (retval)
491 		return retval;
492 
493 	pci_save_state(pci_dev);
494 
495 	/* If the root hub is dead rather than suspended, disallow remote
496 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
497 	 * dying, so we only need to check the primary roothub.
498 	 */
499 	if (HCD_DEAD(hcd))
500 		device_set_wakeup_enable(dev, 0);
501 	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
502 
503 	/* Possibly enable remote wakeup,
504 	 * choose the appropriate low-power state, and go to that state.
505 	 */
506 	retval = pci_prepare_to_sleep(pci_dev);
507 	if (retval == -EIO) {		/* Low-power not supported */
508 		dev_dbg(dev, "--> PCI D0 legacy\n");
509 		retval = 0;
510 	} else if (retval == 0) {
511 		dev_dbg(dev, "--> PCI %s\n",
512 				pci_power_name(pci_dev->current_state));
513 	} else {
514 		suspend_report_result(pci_prepare_to_sleep, retval);
515 		return retval;
516 	}
517 
518 	powermac_set_asic(pci_dev, 0);
519 	return retval;
520 }
521 
522 static int hcd_pci_resume_noirq(struct device *dev)
523 {
524 	struct pci_dev		*pci_dev = to_pci_dev(dev);
525 
526 	powermac_set_asic(pci_dev, 1);
527 
528 	/* Go back to D0 and disable remote wakeup */
529 	pci_back_from_sleep(pci_dev);
530 	return 0;
531 }
532 
533 static int hcd_pci_resume(struct device *dev)
534 {
535 	return resume_common(dev, PM_EVENT_RESUME);
536 }
537 
538 static int hcd_pci_restore(struct device *dev)
539 {
540 	return resume_common(dev, PM_EVENT_RESTORE);
541 }
542 
543 #else
544 
545 #define hcd_pci_suspend		NULL
546 #define hcd_pci_suspend_noirq	NULL
547 #define hcd_pci_resume_noirq	NULL
548 #define hcd_pci_resume		NULL
549 #define hcd_pci_restore		NULL
550 
551 #endif	/* CONFIG_PM_SLEEP */
552 
553 #ifdef	CONFIG_PM_RUNTIME
554 
555 static int hcd_pci_runtime_suspend(struct device *dev)
556 {
557 	int	retval;
558 
559 	retval = suspend_common(dev, true);
560 	if (retval == 0)
561 		powermac_set_asic(to_pci_dev(dev), 0);
562 	dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
563 	return retval;
564 }
565 
566 static int hcd_pci_runtime_resume(struct device *dev)
567 {
568 	int	retval;
569 
570 	powermac_set_asic(to_pci_dev(dev), 1);
571 	retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
572 	dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
573 	return retval;
574 }
575 
576 #else
577 
578 #define hcd_pci_runtime_suspend	NULL
579 #define hcd_pci_runtime_resume	NULL
580 
581 #endif	/* CONFIG_PM_RUNTIME */
582 
583 const struct dev_pm_ops usb_hcd_pci_pm_ops = {
584 	.suspend	= hcd_pci_suspend,
585 	.suspend_noirq	= hcd_pci_suspend_noirq,
586 	.resume_noirq	= hcd_pci_resume_noirq,
587 	.resume		= hcd_pci_resume,
588 	.freeze		= check_root_hub_suspended,
589 	.freeze_noirq	= check_root_hub_suspended,
590 	.thaw_noirq	= NULL,
591 	.thaw		= NULL,
592 	.poweroff	= hcd_pci_suspend,
593 	.poweroff_noirq	= hcd_pci_suspend_noirq,
594 	.restore_noirq	= hcd_pci_resume_noirq,
595 	.restore	= hcd_pci_restore,
596 	.runtime_suspend = hcd_pci_runtime_suspend,
597 	.runtime_resume	= hcd_pci_runtime_resume,
598 };
599 EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
600 
601 #endif	/* CONFIG_PM */
602