xref: /linux/drivers/usb/class/cdc-acm.h (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  *
3  * Includes for cdc-acm.c
4  *
5  * Mainly take from usbnet's cdc-ether part
6  *
7  */
8 
9 /*
10  * CMSPAR, some architectures can't have space and mark parity.
11  */
12 
13 #ifndef CMSPAR
14 #define CMSPAR			0
15 #endif
16 
17 /*
18  * Major and minor numbers.
19  */
20 
21 #define ACM_TTY_MAJOR		166
22 #define ACM_TTY_MINORS		256
23 
24 /*
25  * Requests.
26  */
27 
28 #define USB_RT_ACM		(USB_TYPE_CLASS | USB_RECIP_INTERFACE)
29 
30 /*
31  * Output control lines.
32  */
33 
34 #define ACM_CTRL_DTR		0x01
35 #define ACM_CTRL_RTS		0x02
36 
37 /*
38  * Input control lines and line errors.
39  */
40 
41 #define ACM_CTRL_DCD		0x01
42 #define ACM_CTRL_DSR		0x02
43 #define ACM_CTRL_BRK		0x04
44 #define ACM_CTRL_RI		0x08
45 
46 #define ACM_CTRL_FRAMING	0x10
47 #define ACM_CTRL_PARITY		0x20
48 #define ACM_CTRL_OVERRUN	0x40
49 
50 /*
51  * Internal driver structures.
52  */
53 
54 /*
55  * The only reason to have several buffers is to accommodate assumptions
56  * in line disciplines. They ask for empty space amount, receive our URB size,
57  * and proceed to issue several 1-character writes, assuming they will fit.
58  * The very first write takes a complete URB. Fortunately, this only happens
59  * when processing onlcr, so we only need 2 buffers. These values must be
60  * powers of 2.
61  */
62 #define ACM_NW  16
63 #define ACM_NR  16
64 
65 struct acm_wb {
66 	unsigned char *buf;
67 	dma_addr_t dmah;
68 	int len;
69 	int use;
70 	struct urb		*urb;
71 	struct acm		*instance;
72 };
73 
74 struct acm_rb {
75 	int			size;
76 	unsigned char		*base;
77 	dma_addr_t		dma;
78 	int			index;
79 	struct acm		*instance;
80 };
81 
82 struct acm {
83 	struct usb_device *dev;				/* the corresponding usb device */
84 	struct usb_interface *control;			/* control interface */
85 	struct usb_interface *data;			/* data interface */
86 	struct tty_port port;			 	/* our tty port data */
87 	struct urb *ctrlurb;				/* urbs */
88 	u8 *ctrl_buffer;				/* buffers of urbs */
89 	dma_addr_t ctrl_dma;				/* dma handles of buffers */
90 	u8 *country_codes;				/* country codes from device */
91 	unsigned int country_code_size;			/* size of this buffer */
92 	unsigned int country_rel_date;			/* release date of version */
93 	struct acm_wb wb[ACM_NW];
94 	unsigned long read_urbs_free;
95 	struct urb *read_urbs[ACM_NR];
96 	struct acm_rb read_buffers[ACM_NR];
97 	int rx_buflimit;
98 	int rx_endpoint;
99 	spinlock_t read_lock;
100 	int write_used;					/* number of non-empty write buffers */
101 	int transmitting;
102 	spinlock_t write_lock;
103 	struct mutex mutex;
104 	bool disconnected;
105 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
106 	struct work_struct work;			/* work queue entry for line discipline waking up */
107 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
108 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
109 	struct async_icount iocount;			/* counters for control line changes */
110 	struct async_icount oldcount;			/* for comparison of counter */
111 	wait_queue_head_t wioctl;			/* for ioctl */
112 	unsigned int writesize;				/* max packet size for the output bulk endpoint */
113 	unsigned int readsize,ctrlsize;			/* buffer sizes for freeing */
114 	unsigned int minor;				/* acm minor number */
115 	unsigned char clocal;				/* termios CLOCAL */
116 	unsigned int ctrl_caps;				/* control capabilities from the class specific header */
117 	unsigned int susp_count;			/* number of suspended interfaces */
118 	unsigned int combined_interfaces:1;		/* control and data collapsed */
119 	unsigned int is_int_ep:1;			/* interrupt endpoints contrary to spec used */
120 	unsigned int throttled:1;			/* actually throttled */
121 	unsigned int throttle_req:1;			/* throttle requested */
122 	u8 bInterval;
123 	struct usb_anchor delayed;			/* writes queued for a device about to be woken */
124 	unsigned long quirks;
125 };
126 
127 #define CDC_DATA_INTERFACE_TYPE	0x0a
128 
129 /* constants describing various quirks and errors */
130 #define NO_UNION_NORMAL			BIT(0)
131 #define SINGLE_RX_URB			BIT(1)
132 #define NO_CAP_LINE			BIT(2)
133 #define NO_DATA_INTERFACE		BIT(4)
134 #define IGNORE_DEVICE			BIT(5)
135 #define QUIRK_CONTROL_LINE_STATE	BIT(6)
136 #define CLEAR_HALT_CONDITIONS		BIT(7)
137